def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider( default=255, limits=(0, 255) ) # Make openATV compatible with some plugins who still use config.av.osd_alpha colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigEnableDisable() choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=15000, stepwidth=500, default=500, wraparound=True) # SD - 480 / 576, standard definition # ED - 720, enhanced definition # HD - 1080, high definition # Supported conversions: # * -> 1080i60, 720p60, 480i60, 480p60 # *?50 -> 1080i50, 720p50, 576i50, 576p50 # *p25 -> 1080i50, 720p50, 576i50, 576p50 (1080p25 ?) # *p30 -> 1080p30 # *p24 -> 1080p24 if iAVSwitch.supports1080p: conv_60 = ["1080p", "1080i", "720p", "480p", "480i"] conv_50 = ["1080p50", "1080i50", "720p50", "576p", "576i"] + conv_60 else: conv_60 = ["1080i", "720p", "480p", "480i"] conv_50 = ["1080i50", "720p50", "576p", "576i"] + conv_60 conv_30 = ["1080p30"] + conv_60 conv_24 = ["1080p24"] + conv_60 config.av.autores_sd24 = ConfigSelection(choices=conv_24) config.av.autores_sd25 = ConfigSelection(choices=conv_50) config.av.autores_sd30 = ConfigSelection(choices=conv_30) config.av.autores_sd50i = ConfigSelection(choices=conv_50) config.av.autores_sd50p = ConfigSelection(choices=conv_50) config.av.autores_sd60i = ConfigSelection(choices=conv_60) config.av.autores_sd60p = ConfigSelection(choices=conv_60) config.av.autores_ed24 = ConfigSelection(choices=conv_24) config.av.autores_ed25 = ConfigSelection(choices=conv_50) config.av.autores_ed30 = ConfigSelection(choices=conv_30) config.av.autores_ed50 = ConfigSelection(choices=conv_50) config.av.autores_ed60 = ConfigSelection(choices=conv_60) config.av.autores_hd24 = ConfigSelection(choices=conv_24) config.av.autores_hd25 = ConfigSelection(choices=conv_50) config.av.autores_hd30 = ConfigSelection(choices=conv_30) config.av.autores_hd50 = ConfigSelection(choices=conv_50) config.av.autores_hd60 = ConfigSelection(choices=conv_60) # some boxes do not support YPbPr try: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="yuv") except: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) # config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value == "YPbPr" or getMachineBuild( ) == 'inihdx': iAVSwitch.setColorFormat(3) else: if getBoxType() == 'et6x00': colmap = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType( ) == 'gbquadplus' or getBoxType().startswith('et'): colmap = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: colmap = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(colmap[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): iAVSwitch.setAspectRatio({ "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 }[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus')) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass if about.getChipSetString() in ('7111'): config.av.bypass_edid_checking = ConfigSelection( choices={ "00000000": _("off"), "00000001": _("on") }, default="00000001") else: config.av.bypass_edid_checking = ConfigSelection( choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") choices = f.read().strip() f.close() can_downmix_ac3 = "downmix" in choices except: can_downmix_ac3 = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") print "[AVSwitch] setting AC3 to %s" % configElement.value and "downmix" or "passthrough" f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: f = open("/proc/stb/audio/aac_choices", "r") choices = f.read().strip() f.close() can_downmix_aac = "downmix" in choices except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") print "[AVSwitch] setting AAC to %s" % configElement.value and "downmix" or "passthrough" f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=False) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="4_3_letterbox") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") config.av.policy_169 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="letterbox") config.av.policy_43 = ConfigSelection( choices={ # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&Scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just Scale") }, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.defaultac3 = ConfigYesNo(default=False) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 25, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") def setEDIDBypass(configElement): f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() config.av.bypass_edid_checking.addNotifier(setEDIDBypass) can_pcm_multichannel = False if SystemInfo["CanMultiChannelPCM"]: config.av.multichannel_pcm = ConfigYesNo(default=False) can_pcm_multichannel = True if config.av.multichannel_pcm.value: try: can_pcm_multichannel = access( "/proc/stb/audio/multichannel_pcm", W_OK) and True or False except: can_pcm_multichannel = False SystemInfo["supportMultiChannelPCM"] = can_pcm_multichannel can_speaker_position = False if os_path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): can_speaker_position = True SystemInfo["supportSpeakerPosition"] = can_speaker_position if SystemInfo["CanSpeakerPosition"]: choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.surround_speaker_position = ConfigSelection( choices=choice_list, default="wide") if SystemInfo["Can3DSurround"]: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() if SystemInfo[ "supportSpeakerPosition"] and config.av.surround_3d.value == "none": config.av.surround_speaker_position.value = "wide" config.av.surround_speaker_position.save() SystemInfo["CanSpeakerPosition"] = False elif SystemInfo[ "supportSpeakerPosition"] and config.av.surround_3d.value != "none": SystemInfo["CanSpeakerPosition"] = True choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["supportSpeakerPosition"]: def setSpeakerPosition(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() config.av.surround_speaker_position.addNotifier(setSpeakerPosition) if SystemInfo["CanAVL"]: def setAVL(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.avl = ConfigSelection(choices=choice_list, default="none") config.av.avl.addNotifier(setAVL) if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["supportMultiChannelPCM"] and ( not config.av.downmix_ac3.value): SystemInfo["CanMultiChannelPCM"] = True elif SystemInfo[ "supportMultiChannelPCM"] and config.av.downmix_ac3.value: SystemInfo["CanMultiChannelPCM"] = False config.av.multichannel_pcm.value = False config.av.multichannel_pcm.save() config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) def setMultiChannelPCM(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") if SystemInfo["supportMultiChannelPCM"]: config.av.multichannel_pcm.addNotifier( setMultiChannelPCM, initial_call=config.av.multichannel_pcm.value) try: can_osd_alpha = open("/proc/stb/video/alpha", "r") and True or False except: can_osd_alpha = False SystemInfo["CanChangeOsdAlpha"] = can_osd_alpha def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) if can_osd_alpha: config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os_path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=0, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing())
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255)) # Make openHDF compatible with some plugins who still use config.av.osd_alpha colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={"disabled": _("Disabled"), "simple": _("Simple"), "native": _("Native"), "all": _("All resolutions"), "hd": _("only HD")}, default="disabled") config.av.autores_preview = NoSave(ConfigYesNo(default=False)) config.av.autores_1080i_deinterlace = ConfigYesNo(default=False) choicelist = { "24,24": _("24p/24p"), "24,25": _("24p/25p"), "24,30": _("24p/30p"), "24,50": _("24p/50p"), "24,60": _("24p/60p"), "25,24": _("25p/24p"), "30,24": _("30p/24p"), "50,24": _("50p/24p"), "60,24": _("60p/24p"), "25,25": _("25p/25p"), "25,30": _("25p/30p"), "25,50": _("25p/50p"), "25,60": _("25p/60p"), "30,25": _("30p/25p"), "50,25": _("50p/25p"), "60,25": _("60p/25p"), "30,30": _("30p/30p"), "30,50": _("30p/50p"), "30,60": _("30p/60p"), "50,30": _("50p/30p"), "60,30": _("60p/30p"), "50,50": _("50p/50p"), "50,60": _("50p/60p"), "60,50": _("60p/50p"), "60,60": _("60p/60p") } # first value <=720p , second value > 720p config.av.autores_24p = ConfigSelection(choices=choicelist, default="50,24") config.av.autores_25p = ConfigSelection(choices=choicelist, default="50,25") config.av.autores_30p = ConfigSelection(choices=choicelist, default="60,30") config.av.autores_unknownres = ConfigSelection(choices={"next": _("next higher Resolution"), "highest": _("highest Resolution")}, default="next") choicelist = [] for i in range(5, 16): choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection(default = "5", choices = [("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min = 0, max = 3000, stepwidth = 50, default = 400, wraparound = True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={"720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i")}, default="720p50") config.av.autores_480p24 = ConfigSelection(choices={"480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={"720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz")}, default="720p24") config.av.autores_1080p24 = ConfigSelection(choices={"1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz")}, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={"1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz")}, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={"1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz")}, default="1080p30") config.av.autores_2160p24 = ConfigSelection(choices={"2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz"), "2160p30": _("2160p 30Hz")}, default="2160p24") config.av.autores_2160p25 = ConfigSelection(choices={"2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz")}, default="2160p25") config.av.autores_2160p30 = ConfigSelection(choices={"2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz")}, default="2160p30") config.av.smart1080p = ConfigSelection(choices={"false": _("off"), "true": _("1080p50: 24p/50p/60p"), "2160p50": _("2160p50: 24p/50p/60p"), "1080i50": _("1080i50: 24p/50i/60i"), "720p50": _("720p50: 24p/50p/60p")}, default="false") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic")}, default = "16:9") # Some boxes have a redundant proc entry for policy2 choices, but some don't (The choices are from a 16:9 point of view anyways) if os.path.exists("/proc/stb/video/policy2_choices"): policy2_choices_proc="/proc/stb/video/policy2_choices" else: policy2_choices_proc="/proc/stb/video/policy_choices" try: policy2_choices_raw=open(policy2_choices_proc, "r").read() except: policy2_choices_raw="letterbox" policy2_choices = {} if "letterbox" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. policy2_choices.update({"letterbox": _("Letterbox")}) if "panscan" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term policy2_choices.update({"panscan": _("Pan&scan")}) if "nonliner" in policy2_choices_raw and not "nonlinear" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch)) policy2_choices.update({"nonliner": _("Stretch nonlinear")}) if "nonlinear" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch)) policy2_choices.update({"nonlinear": _("Stretch nonlinear")}) if "scale" in policy2_choices_raw and not "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"scale": _("Stretch linear")}) if "full" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect)) policy2_choices.update({"full": _("Stretch full")}) if "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"auto": _("Stretch linear")}) if "bestfit" in policy2_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy2_choices.update({"bestfit": _("Stretch linear")}) config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices_proc="/proc/stb/video/policy_choices" try: policy_choices_raw=open(policy_choices_proc, "r").read() except: policy_choices_raw="panscan" policy_choices = {} if "pillarbox" in policy_choices_raw and not "panscan" in policy_choices_raw: # Very few boxes support "pillarbox" as an alias for "panscan" (Which in fact does pillarbox) # So only add "pillarbox" if "panscan" is not listed in choices # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. policy_choices.update({"pillarbox": _("Pillarbox")}) if "panscan" in policy_choices_raw: # DRIVER BUG: "panscan" in /proc actually does "pillarbox" (That's probably why an alias to it named "pillarbox" existed)! # Interpret "panscan" setting with a "Pillarbox" text in order to show the correct value in GUI # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. policy_choices.update({"panscan": _("Pillarbox")}) if "letterbox" in policy_choices_raw: # DRIVER BUG: "letterbox" in /proc actually does pan&scan # "letterbox" and 4:3 content on 16:9 TVs is mutually exclusive, as "letterbox" is the method to show wide content on narrow TVs # Probably the bug arose as the driver actually does the same here as it would for wide content on narrow TVs (It stretches the picture to fit width) # TRANSLATORS: (aspect ratio policy: Fit width, cut/crop top and bottom (Maintain aspect ratio)) policy_choices.update({"letterbox": _("Pan&scan")}) if "nonliner" in policy_choices_raw and not "nonlinear" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch)) policy_choices.update({"nonliner": _("Stretch nonlinear")}) if "nonlinear" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch)) policy_choices.update({"nonlinear": _("Stretch nonlinear")}) # "auto", "bestfit" and "scale" are aliasses for the same: Stretch linear if "scale" in policy_choices_raw and not "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"scale": _("Stretch linear")}) if "full" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect)) policy_choices.update({"full": _("Stretch full")}) if "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"auto": _("Stretch linear")}) if "bestfit" in policy_choices_raw: # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect)) policy_choices.update({"bestfit": _("Stretch linear")}) config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "panscan") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) #config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ("YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType() == 'gbquadplus' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue', 'gbultraueh' , 'twinboxlcd' )) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") if configElement.value: f.write("00000001") else: f.write("00000000") f.close() except: pass config.av.bypass_edid_checking = ConfigYesNo(default=True) config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() def setUnsupportModes(configElement): iAVSwitch.readPreferredModes() iAVSwitch.createConfig() config.av.edid_override.addNotifier(setUnsupportModes) if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k','vuuno4k','vuuno4kse','vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420")}, default = "Edid(Auto)") elif getBoxType() in ('dm900','dm920','vuzero4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "Itu_R_BT_709": _("BT709"), "DVI_Full_Range_RGB": _("Full Range RGB"), "FCC": _("FCC 1953"), "Itu_R_BT_470_2_BG": _("BT470 BG"), "Smpte_170M": _("Smpte 170M"), "Smpte_240M": _("Smpte 240M"), "Itu_R_BT_2020_NCL": _("BT2020 NCL"), "Itu_R_BT_2020_CL": _("BT2020 CL"), "XvYCC_709": _("BT709 XvYCC"), "XvYCC_601": _("BT601 XvYCC")}, default = "Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444")}, default = "auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): sleep(0.1) try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "auto": _("auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709")}, default = "auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("enable PIP no HDR"), "1": _("12bit 4:2:0/4:2:2 no PIP")}, default = "12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit")}, default = "auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_hdrtype"): f = open("/proc/stb/video/hdmi_hdrtype", "r") have_HdmiHdrType = f.read().strip().split(" ") f.close() else: have_HdmiHdrType = False SystemInfo["havehdmihdrtype"] = have_HdmiHdrType if have_HdmiHdrType: def setHdmiHdrType(configElement): try: f = open("/proc/stb/video/hdmi_hdrtype", "w") f.write(configElement.value) f.close() except: pass config.av.hdmihdrtype = ConfigSelection(choices={ "auto": _("Auto"), "dolby": _("dolby"), "none": _("sdr"), "hdr10": _("hdr10"), "hlg": _("hlg")}, default = "auto") config.av.hdmihdrtype.addNotifier(setHdmiHdrType) else: config.av.hdmihdrtype = ConfigNothing() if os.path.exists("/proc/stb/hdmi/hlg_support_choices"): f = open("/proc/stb/hdmi/hlg_support_choices", "r") have_HDRSupport = f.read().strip().split(" ") f.close() else: have_HDRSupport = False SystemInfo["HDRSupport"] = have_HDRSupport if have_HDRSupport: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection(default = "auto(EDID)", choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]); config.av.allow_10bit.addNotifier(setDisable10Bit) if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF")}, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices = choice_list, default = "center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices = choice_list, default = "none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default = False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanPcmMultichannel"] = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): f.write(configElement.value) else: f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_ac3 = ConfigSelection(choices = choice_list, default = "downmix") else: config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if os.path.exists("/proc/stb/audio/ac3plus_choices"): f = open("/proc/stb/audio/ac3plus_choices", "r") can_ac3plustranscode = f.read().strip().split(" ") f.close() else: can_ac3plustranscode = False SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode if can_ac3plustranscode: def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI")), ("force_ddp", _("force AC3plus"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") elif getBoxType() in ('gbquad4k', 'gbue4k'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("force_dts", _("convert to DTS"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") else: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) try: f = open("/proc/stb/audio/dtshd_choices", "r") file = f.read()[:-1] can_dtshd = f.read().strip().split(" ") f.close() except: can_dtshd = False SystemInfo["CanDTSHD"] = can_dtshd if can_dtshd: def setDTSHD(configElement): f = open("/proc/stb/audio/dtshd", "w") f.write(configElement.value) f.close() if getBoxType() in ("dm7080" , "dm820"): choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))] config.av.dtshd = ConfigSelection(choices = choice_list, default = "use_hdmi_caps") else: choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.dtshd = ConfigSelection(choices = choice_list, default = "downmix") config.av.dtshd.addNotifier(setDTSHD) try: f = open("/proc/stb/audio/wmapro_choices", "r") file = f.read()[:-1] can_wmapro = f.read().strip().split(" ") f.close() except: can_wmapro = False SystemInfo["CanWMAPRO"] = can_wmapro if can_wmapro: def setWMAPRO(configElement): f = open("/proc/stb/audio/wmapro", "w") f.write(configElement.value) f.close() choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.wmapro = ConfigSelection(choices = choice_list, default = "downmix") config.av.wmapro.addNotifier(setWMAPRO) try: f = open("/proc/stb/audio/dts_choices", "r") file = f.read()[:-1] f.close() can_downmix_dts = "downmix" in file except: can_downmix_dts = False SystemInfo["CanDownmixDTS"] = can_downmix_dts if can_downmix_dts: def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_dts = ConfigYesNo(default = True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800', 'gbquad4k', 'gbue4k'): f.write(configElement.value) else: f.write(configElement.value and "downmix" or "passthrough") f.close() if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix") elif getBoxType() in ('gbquad4k', 'gbue4k'): choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix") else: config.av.downmix_aac = ConfigYesNo(default = True) config.av.downmix_aac.addNotifier(setAACDownmix) try: f = open("/proc/stb/audio/aacplus_choices", "r") file = f.read()[:-1] f.close() can_downmix_aacplus = "downmix" in file except: can_downmix_aacplus = False SystemInfo["CanDownmixAACPlus"] = can_downmix_aacplus if can_downmix_aacplus: def setAACDownmixPlus(configElement): f = open("/proc/stb/audio/aacplus", "w") f.write(configElement.value) f.close() choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aacplus = ConfigSelection(choices = choice_list, default = "downmix") config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/audio/btaudio"): f = open("/proc/stb/audio/btaudio", "r") can_btaudio = f.read().strip().split(" ") f.close() else: can_btaudio = False SystemInfo["CanBTAudio"] = can_btaudio if can_btaudio: def setBTAudio(configElement): f = open("/proc/stb/audio/btaudio", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("on", _("on"))] config.av.btaudio = ConfigSelection(choices = choice_list, default = "off") config.av.btaudio.addNotifier(setBTAudio) else: config.av.btaudio = ConfigNothing() if os.path.exists("/proc/stb/audio/btaudio_delay"): f = open("/proc/stb/audio/btaudio_delay", "r") can_btaudio_delay = f.read().strip().split(" ") f.close() else: can_btaudio_delay = False SystemInfo["CanBTAudioDelay"] = can_btaudio_delay if can_btaudio_delay: def setBTAudioDelay(configElement): f = open("/proc/stb/audio/btaudio_delay", "w") f.write(format(configElement.value * 90,"x")) f.close() config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.btaudiodelay.addNotifier(setBTAudioDelay) else: config.av.btaudiodelay = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[AVSwitch] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X\n" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[AVSwitch] couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=15000, stepwidth=500, default=500, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p": _("720p"), "1080i": _("1080i") }, default="720p") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz") }, default="1080p30") config.av.autores_2160p24 = ConfigSelection(choices={ "2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz"), "2160p30": _("2160p 30Hz") }, default="2160p24") config.av.autores_2160p25 = ConfigSelection(choices={ "2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz") }, default="2160p25") config.av.autores_2160p30 = ConfigSelection(choices={ "2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz") }, default="2160p30") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setHDMIColorspace(configElement): try: f = open(SystemInfo["havecolorspace"], "w") f.write(configElement.value) f.close() except: pass def setHDMIColorimetry(configElement): try: f = open(SystemInfo["havecolorimetry"], "w") f.write(configElement.value) f.close() except: pass def setHdmiColordepth(configElement): try: f = open(SystemInfo["havehdmicolordepth"], "w") f.write(configElement.value) f.close() except: pass def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() def set3DPosition(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value) f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if SystemInfo["supportPcmMultichannel"]: config.av.pcm_multichannel.setValue(False) def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value) f.close() def setDTSHD(configElement): f = open("/proc/stb/audio/dtshd", "w") f.write(configElement.value) f.close() def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value) f.close() def setAACDownmixPlus(configElement): f = open("/proc/stb/audio/aacplus", "w") f.write(configElement.value) f.close() def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() def setWMAPRO(configElement): f = open("/proc/stb/audio/wmapro", "w") f.write(configElement.value) f.close() def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "[VideoHardware] couldn't write pep_scaler_sharpness" def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def read_choices(procx, defchoice): with open(procx, 'r') as myfile: choices = myfile.read().strip() myfile.close() if choices: choiceslist = choices.split(" ") choicesx = [(item, _("%s") % item) for item in choiceslist] defaultx = choiceslist[0] for item in choiceslist: if "%s" % defchoice.upper in item.upper(): defaultx = item break return (choicesx, defaultx) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if SystemInfo["Canedidchecking"]: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass if about.getChipSetString() in ('7111'): config.av.bypass_edid_checking = ConfigSelection( choices={ "00000000": _("off"), "00000001": _("on") }, default="00000001") else: config.av.bypass_edid_checking = ConfigSelection( choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if SystemInfo["havecolorspace"]: if getBrandOEM() == "vuplus" and SystemInfo["HasMMC"]: choices = [("Edid(Auto)", _("Auto")), ("Hdmi_Rgb", _("RGB")), ("444", _("YCbCr444")), ("422", _("YCbCr422")), ("420", _("YCbCr420"))] default = "Edid(Auto)" else: choices = [("auto", _("Auto")), ("rgb", _("RGB")), ("420", _("420")), ("422", _("422")), ("444", _("444"))] default = "auto" if SystemInfo["havecolorspacechoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorspace_choices" (choices, default) = read_choices(f, default) config.av.hdmicolorspace = ConfigSelection(choices=choices, default=default) config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if SystemInfo["havecolorimetry"]: choices = [("auto", _("auto")), ("bt2020ncl", _("BT 2020 NCL")), ("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))] default = "auto" if SystemInfo["havecolorimetrychoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorimetry_choices" (choices, default) = read_choices(f, default) config.av.hdmicolorimetry = ConfigSelection(choices=choices, default=default) config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if SystemInfo["havehdmicolordepth"]: choices = [("auto", _("Auto")), ("8bit", _("8bit")), ("10bit", _("10bit")), ("12bit", _("12bit"))] default = "auto" if SystemInfo["havehdmicolordepthchoices"] and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colordepth_choices" (choices, default) = read_choices(f, default) config.av.hdmicolordepth = ConfigSelection(choices=choices, default=default) config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if SystemInfo["havehdmihdrtype"]: def setHdmiHdrType(configElement): try: f = open("/proc/stb/video/hdmi_hdrtype", "w") f.write(configElement.value) f.close() except: pass config.av.hdmihdrtype = ConfigSelection(choices={ "auto": _("Auto"), "dolby": _("dolby"), "none": _("sdr"), "hdr10": _("hdr10"), "hlg": _("hlg") }, default="auto") config.av.hdmihdrtype.addNotifier(setHdmiHdrType) else: config.av.hdmihdrtype = ConfigNothing() if SystemInfo["HDRSupport"]: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write(configElement.value) config.av.allow_12bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write(configElement.value) config.av.allow_10bit = ConfigSelection(default="0", choices=[("0", _("yes")), ("1", _("no"))]) config.av.allow_10bit.addNotifier(setDisable10Bit) if SystemInfo["Canaudiosource"]: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if SystemInfo["Can3DSurround"]: choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_choices" (choices, default) = read_choices(f, default) config.av.surround_3d = ConfigSelection(choices=choices, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if SystemInfo["Can3DSpeaker"]: choices = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] default = "center" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_speaker_position_choices" (choices, default) = read_choices(f, default) config.av.surround_3d_speaker = ConfigSelection(choices=choices, default=default) config.av.surround_3d_speaker.addNotifier(set3DPosition) else: config.av.surround_3d_speaker = ConfigNothing() if SystemInfo["CanAutoVolume"]: choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/avl_choices" (choices, default) = read_choices(f, default) config.av.autovolume = ConfigSelection(choices=choices, default=default) config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() if SystemInfo["supportPcmMultichannel"]: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) if SystemInfo["CanDownmixAC3"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3_choices" (choices, default) = read_choices(f, default) config.av.downmix_ac3 = ConfigSelection(choices=choices, default=default) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3Transcode"]: choices = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] default = "force_ac3" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3plus_choices" (choices, default) = read_choices(f, default) config.av.transcodeac3plus = ConfigSelection(choices=choices, default=default) config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dts_choices" (choices, default) = read_choices(f, default) config.av.downmix_dts = ConfigSelection(choices=choices, default=default) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: choices = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dtshd_choices" (choices, default) = read_choices(f, default) config.av.dtshd = ConfigSelection(choices=choices, default=default) config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanDownmixAAC"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_choices" (choices, default) = read_choices(f, default) config.av.downmix_aac = ConfigSelection(choices=choices, default=default) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aacplus_choices" (choices, default) = read_choices(f, default) config.av.downmix_aacplus = ConfigSelection(choices=choices, default=default) config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_transcode_choices" (choices, default) = read_choices(f, default) config.av.transcodeaac = ConfigSelection(choices=choices, default=default) config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if SystemInfo["CanWMAPRO"]: choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/wmapro_choices" (choices, default) = read_choices(f, default) config.av.wmapro = ConfigSelection(choices=choices, default=default) config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["haveboxmode"]: config.av.boxmode = ConfigSelection(choices={ "12": _("PIP enabled, no HDR"), "1": _("HDR, 12bit 4:2:0/4:2:2, no PIP") }, default="12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if SystemInfo["HasScaler_sharpness"]: if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=15000, stepwidth=500, default=500, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p": _("720p"), "1080i": _("1080i") }, default="720p") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz") }, default="1080p30") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000000") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() try: can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK) except: can_pcm_multichannel = False SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel if can_pcm_multichannel: def setPCMMultichannel(configElement): open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: f = open("/proc/stb/audio/ac3_choices", "r") file = f.read()[:-1] f.close() can_downmix_ac3 = "downmix" in file except: can_downmix_ac3 = False SystemInfo["CanDownmixAC3"] = can_downmix_ac3 if can_downmix_ac3: def setAC3Downmix(configElement): f = open("/proc/stb/audio/ac3", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value: SystemInfo["CanPcmMultichannel"] = True else: SystemInfo["CanPcmMultichannel"] = False if can_pcm_multichannel: config.av.pcm_multichannel.setValue(False) config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av = ConfigSubsection() if getBoxType() == "vuduo" or getBoxBrand() == "ixuss": config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS")} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = _("YPbPr") if SystemInfo["HasScart"]: colorformat_choices["rgb"] = _("RGB") if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = _("S-Video") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="scale") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Nonlinear")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="scale") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): if getBoxType() == "et6x00": map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif SystemInfo["GigaBlueQuad"] or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup if SystemInfo["GigaBlueQuad"] or getBoxType() in ( "et5x00", "et6x00", "ixussone", "ixusszero", "axodin", "axodinc", "starsatlx", "galaxym6", "geniuse3hd", "evoe3hd", "axase3", "axase3c", "optimussos1", "optimussos2", "gb800seplus", "gb800ueplus", "gbultrase", "gbultraue", "gbultraueh", "twinboxlcd"): detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): if SystemInfo["DreamBoxAudio"]: open("/proc/stb/audio/ac3", "w").write(configElement.value) else: open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["DreamBoxAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_ac3 = ConfigSelection(choices=choice_list, default="downmix") else: config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3plusTranscode"]: def setAC3plusTranscode(configElement): open("/proc/stb/audio/ac3plus", "w").write(configElement.value) if SystemInfo["DreamBoxAudio"]: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI")), ("force_ddp", _("force AC3plus"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") elif SystemInfo["GigaBlueAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("force_dts", _("convert to DTS"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") else: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="force_ac3") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: def setDTSHD(configElement): open("/proc/stb/audio/dtshd", "w").write(configElement.value) if SystemInfo["DreamBoxDTSAudio"]: choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="use_hdmi_caps") else: choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="downmix") config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanWMAPRO"]: def setWMAPRO(configElement): open("/proc/stb/audio/wmapro", "w").write(configElement.value) choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.wmapro = ConfigSelection(choices=choice_list, default="downmix") config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): if SystemInfo["DreamBoxAudio"] or SystemInfo["GigaBlueAudio"]: open("/proc/stb/audio/aac", "w").write(configElement.value) else: open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") if SystemInfo["DreamBoxAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.downmix_aac = ConfigSelection(choices=choice_list, default="downmix") elif SystemInfo["GigaBlueAudio"]: choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aac = ConfigSelection(choices=choice_list, default="downmix") else: config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: def setAACDownmixPlus(configElement): open("/proc/stb/audio/aacplus", "w").write(configElement.value) choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] config.av.downmix_aacplus = ConfigSelection(choices=choice_list, default="downmix") config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: def setAACTranscode(configElement): open("/proc/stb/audio/aac_transcode", "w").write(configElement.value) choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if SystemInfo["CanBTAudio"]: def setBTAudio(configElement): open("/proc/stb/audio/btaudio", "w").write(configElement.value) choice_list = [("off", _("off")), ("on", _("on"))] config.av.btaudio = ConfigSelection(choices=choice_list, default="off") config.av.btaudio.addNotifier(setBTAudio) else: config.av.btaudio = ConfigNothing() if SystemInfo["CanBTAudioDelay"]: def setBTAudioDelay(configElement): open("/proc/stb/audio/btaudio", "w").write(format(configElement.value * 90)) config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.btaudiodelay.addNotifier(setBTAudioDelay) else: config.av.btaudiodelay = ConfigNothing() if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if SystemInfo["ScalerSharpness"]: def setScaler_sharpness(config): myval = int(config.value) try: print("--> setting scaler_sharpness to: %0.8X" % myval) open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print("[AVSwitch] couldn't write pep_scaler_sharpness") if SystemInfo["GigaBlueQuad"]: config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) config.av.autovolume = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) config.av.surround_3d = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="disabled", choices=[("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[ ("pcm", _("PCM")), ("spdif", _("SPDIF")) ]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic")}, default = "auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "pillarbox") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm" : 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() try: SystemInfo["CanDownmixAC3"] = "downmix" in open("/proc/stb/audio/ac3_choices", "r").read() except: SystemInfo["CanDownmixAC3"] = False if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: SystemInfo["CanDownmixDTS"] = "downmix" in open("/proc/stb/audio/dts_choices", "r").read() except: SystemInfo["CanDownmixDTS"] = False if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default = True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: SystemInfo["CanDownmixAAC"] = "downmix" in open("/proc/stb/audio/aac_choices", "r").read() except: SystemInfo["CanDownmixAAC"] = False if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default = True) config.av.downmix_aac.addNotifier(setAACDownmix) try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0,255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default = False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int(configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default = 2) config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS")} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = _("YPbPr") if SystemInfo["HasScart"]: colorformat_choices["rgb"] = _("RGB") if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = _("S-Video") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 Zoom"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 Zoom"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on top/bottom) in doubt, keep english term "panscan": _("Zoom"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Stretch") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Zoom"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Stretch") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Panoramic")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("Multinorm") }, default="multinorm") config.av.wss = ConfigEnableDisable(default=False) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) config.av.autovolume = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) config.av.surround_3d = ConfigSelection(default="none", choices=[("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="disabled", choices=[("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[ ("pcm", _("PCM")), ("spdif", _("SPDIF")) ]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitUsageConfig(): config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))]) config.usage = ConfigSubsection() config.usage.showdish = ConfigYesNo(default = True) config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))]) config.usage.multibouquet = ConfigYesNo(default = True) config.usage.alternative_number_mode = ConfigYesNo(default = False) def alternativeNumberModeChange(configElement): eDVBDB.getInstance().setNumberingMode(configElement.value) refreshServiceList() config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange) config.usage.hide_number_markers = ConfigYesNo(default = True) config.usage.hide_number_markers.addNotifier(refreshServiceList) config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.crypto_icon_mode.addNotifier(refreshServiceList) config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))]) config.usage.servicetype_icon_mode.addNotifier(refreshServiceList) config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))]) config.usage.record_indicator_mode.addNotifier(refreshServiceList) choicelist = [("-1", _("Disable"))] for i in range(0,1300,100): choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i)) config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist) config.usage.servicelist_column.addNotifier(refreshServiceList) config.usage.service_icon_enable = ConfigYesNo(default = False) config.usage.service_icon_enable.addNotifier(refreshServiceList) config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("keep", _("Keep service")), ("reverseB", _("Reverse bouquet buttons")), ("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))]) config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False) config.usage.quickzap_bouquet_change = ConfigYesNo(default = False) config.usage.e1like_radio_mode = ConfigYesNo(default = True) config.usage.volume_step_slow = ConfigSelectionNumber(default = 1, stepwidth = 1, min = 1, max = 10, wraparound = False) config.usage.volume_step_fast = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 10, wraparound = False) choicelist = [("0", _("No timeout"))] for i in range(1, 12): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist) config.usage.show_infobar_on_zap = ConfigYesNo(default = True) config.usage.show_infobar_on_skip = ConfigYesNo(default = True) config.usage.show_infobar_on_event_change = ConfigYesNo(default = False) config.usage.show_second_infobar = ConfigSelection(default = "11", choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))]) config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))]) config.usage.oldstyle_zap_controls = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("neutrino", _("Neutrino")), ("openspa", _("OpenSPA")) ]) config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False) config.usage.zap_with_ch_buttons = ConfigYesNo(default = False) config.usage.ok_is_channelselection = ConfigYesNo(default = False) config.usage.channelselection_preview = ConfigYesNo(default = False) config.usage.show_spinner = ConfigYesNo(default = True) config.usage.enable_tt_caching = ConfigYesNo(default = True) config.usage.sort_settings = ConfigYesNo(default = False) config.usage.sort_menus = ConfigYesNo(default = False) choicelist = [] for i in (10, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300, 600, 1200, 1800): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) for i in (3600, 7200, 14400): h = i / 3600 choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h)) config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist) config.usage.hdd_standby_in_standby = ConfigSelection(default = "-1", choices = [("-1", _("Same as in active")), ("0", _("No standby"))] + choicelist) config.usage.hdd_timer = ConfigYesNo(default = False) config.usage.output_12V = ConfigSelection(default = "do not change", choices = [ ("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ]) config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [ ("standard", _("Standard")), ("swap", _("Swap PiP and main picture")), ("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ]) config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ]) choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))] for i in [60, 300, 600, 900, 1800, 2700, 3600]: m = i/60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist) config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD)) config.usage.timer_path = ConfigText(default = "<default>") config.usage.instantrec_path = ConfigText(default = "<default>") config.usage.timeshift_path = ConfigText(default = "/media/hdd/") config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"]) config.plisettings = ConfigSubsection() config.plisettings.Subservice = ConfigYesNo(default = True) config.oscaminfo = ConfigSubsection() config.oscaminfo.showInExtensions = ConfigYesNo(default=False) config.oscaminfo.userdatafromconf = ConfigYesNo(default = False) config.oscaminfo.autoupdate = ConfigYesNo(default = False) config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12) config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False) config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True) config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) ) config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True) config.cccaminfo = ConfigSubsection() config.cccaminfo.showInExtensions = ConfigYesNo(default=False) config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True) config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False) config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False) config.cccaminfo.username = ConfigText(default="", fixed_size=False) config.cccaminfo.password = ConfigText(default="", fixed_size=False) config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535)) config.cccaminfo.profile = ConfigText(default="", fixed_size=False) config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True) config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True) config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True) config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50) config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50) config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False) config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False) config.usage.movielist_trashcan = ConfigYesNo(default=True) config.usage.movielist_trashcan_days = ConfigNumber(default=8) config.usage.movielist_trashcan_reserve = ConfigNumber(default=40) config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [ ("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")), ("ask no", _("Ask user") + " " + _("default") + " " + _("no")), ("resume", _("Resume from last position")), ("beginning", _("Start from the beginning"))]) config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ]) config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [ ("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")), ("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))]) config.usage.next_movie_msg = ConfigYesNo(default = True) config.usage.last_movie_played = ConfigText() config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [ ("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ]) config.usage.setup_level = ConfigSelection(default = "expert", choices = [ ("simple", _("Simple")), ("intermediate", _("Intermediate")), ("expert", _("Expert")) ]) config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("except", _("No, except Wakeup timer")) ]) config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [ ("no", _("No")), ("yes", _("Yes")), ("standby", _("Yes, only from standby")), ("deepstandby", _("Yes, only from deep standby")) ]) config.usage.wakeup_day = ConfigSubDict() config.usage.wakeup_time = ConfigSubDict() for i in range(7): config.usage.wakeup_day[i] = ConfigEnableDisable(default = False) config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60)) config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")), ("restart", _("Reboot")) ] ) config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [ ("show_menu", _("Show shutdown menu")), ("shutdown", _("Immediate shutdown")), ("standby", _("Standby")) ] ) choicelist = [("0", _("Do nothing"))] for i in range(3600, 21601, 3600): h = abs(i / 3600) h = ngettext("%d hour", "%d hours", h) % h choicelist.append((str(i), _("Standby in ") + h)) config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True) config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict() config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict() for i in range(7): config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False) config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))] for i in range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("Standby in ") + m)) config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist) choicelist = [("0", _("Disabled"))] for i in [60, 300, 600] + range(900, 7201, 900): m = abs(i / 60) m = ngettext("%d minute", "%d minutes", m) % m choicelist.append((str(i), _("after ") + m)) config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist) config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False) config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0))) config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0))) choicelist = [("0", _("Disabled"))] for m in (1, 5, 10, 15, 30, 60): choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m)) config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist) config.usage.check_timeshift = ConfigYesNo(default = True) choicelist = [("0", _("Disabled"))] for i in (2, 3, 4, 5, 10, 20, 30): choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i)) for i in (60, 120, 300): m = i / 60 choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m)) config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist) config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [ ("0", "DVB-S/-C/-T"), ("1", "DVB-S/-T/-C"), ("2", "DVB-C/-S/-T"), ("3", "DVB-C/-T/-S"), ("4", "DVB-T/-C/-S"), ("5", "DVB-T/-S/-C"), ("127", _("No priority")) ]) def remote_fallback_changed(configElement): if configElement.value: configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value) configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "") config.usage.remote_fallback_enabled = ConfigYesNo(default = False) config.usage.remote_fallback = ConfigText(default = _("http://IP-ADDRESS:8001"), fixed_size = False) config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False) config.usage.show_timer_conflict_warning = ConfigYesNo(default = True) dvbs_nims = [("-2", _("Disabled"))] dvbt_nims = [("-2", _("Disabled"))] dvbc_nims = [("-2", _("Disabled"))] atsc_nims = [("-2", _("Disabled"))] nims = [("-1", _("auto"))] for x in nimmanager.nim_slots: if x.isCompatible("DVB-S"): dvbs_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-T"): dvbt_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("DVB-C"): dvbc_nims.append((str(x.slot), x.getSlotName())) elif x.isCompatible("ATSC"): atsc_nims.append((str(x.slot), x.getSlotName())) nims.append((str(x.slot), x.getSlotName())) config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims)) nims.insert(0,("-2", _("Disabled"))) config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims) config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims)) dvbs_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims) config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims)) dvbt_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims) config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims)) dvbc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims) config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims)) atsc_nims.insert(1,("-1", _("auto"))) config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims) SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims)) SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims)) SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims)) config.misc.disable_background_scan = ConfigYesNo(default = False) config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True) config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 14, stepwidth = 1, min = 8, max = 20, wraparound = True) config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [ ('barleft', _("Progress bar left")), ('barright', _("Progress bar right")), ('percleft', _("Percentage left")), ('percright', _("Percentage right")), ('no', _("No")) ]) config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True) config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList) config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList) config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False) config.usage.blinking_rec_symbol_during_recording = ConfigYesNo(default = False) config.usage.show_message_when_recording_starts = ConfigYesNo(default = True) config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True) config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [ ('o', _("Off")), ('p', _("Progress")), ('s', _("Small progress")), ('i', _("Icons")), ]) config.usage.movielist_unseen = ConfigYesNo(default = False) config.usage.swap_snr_on_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False) config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))]) config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))]) config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False) config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [ ("10000", "10 " + _("seconds")), ("20000", "20 " + _("seconds")), ("30000", "30 " + _("seconds")), ("60000", "1 " + _("minute")), ("300000", "5 " + _("minutes")), ("noscrolling", _("off"))]) config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [ ("500", _("slow")), ("300", _("normal")), ("100", _("fast"))]) config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))]) config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))]) config.usage.numzaptimeout1 = ConfigSlider(default = 3000, increment = 250, limits = (750, 5000)) config.usage.numzaptimeout2 = ConfigSlider(default = 1000, increment = 250, limits = (750, 5000)) def SpinnerOnOffChanged(configElement): setSpinnerOnOff(int(configElement.value)) config.usage.show_spinner.addNotifier(SpinnerOnOffChanged) def EnableTtCachingChanged(configElement): setEnableTtCachingOnOff(int(configElement.value)) config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged) def TunerTypePriorityOrderChanged(configElement): setTunerTypePriorityOrder(int(configElement.value)) config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False) def PreferredTunerChanged(configElement): setPreferredTuner(int(configElement.value)) config.usage.frontend_priority.addNotifier(PreferredTunerChanged) config.usage.hide_zap_errors = ConfigYesNo(default = False) config.usage.hide_ci_messages = ConfigYesNo(default = True) config.usage.show_cryptoinfo = ConfigYesNo(default = True) config.usage.show_eit_nownext = ConfigYesNo(default = True) config.usage.show_vcr_scart = ConfigYesNo(default = False) config.usage.show_update_disclaimer = ConfigYesNo(default = True) config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")]) if SystemInfo["Fan"]: choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))] if os.path.exists("/proc/stb/fp/fan_choices"): choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")] config.usage.fan = ConfigSelection(choicelist) def fanChanged(configElement): open(SystemInfo["Fan"], "w").write(configElement.value) config.usage.fan.addNotifier(fanChanged) if SystemInfo["FanPWM"]: def fanSpeedChanged(configElement): open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:]) config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255)) config.usage.fanspeed.addNotifier(fanSpeedChanged) if SystemInfo["StandbyLED"]: def standbyLEDChanged(configElement): open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off") config.usage.standbyLED = ConfigYesNo(default = True) config.usage.standbyLED.addNotifier(standbyLEDChanged) config.epg = ConfigSubsection() config.epg.eit = ConfigYesNo(default = True) config.epg.mhw = ConfigYesNo(default = True) config.epg.freesat = ConfigYesNo(default = True) config.epg.viasat = ConfigYesNo(default = True) config.epg.netmed = ConfigYesNo(default = True) config.epg.virgin = ConfigYesNo(default = False) config.misc.showradiopic = ConfigYesNo(default = True) def EpgSettingsChanged(configElement): from enigma import eEPGCache mask = 0xffffffff if not config.epg.eit.value: mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER) if not config.epg.mhw.value: mask &= ~eEPGCache.MHW if not config.epg.freesat.value: mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER) if not config.epg.viasat.value: mask &= ~eEPGCache.VIASAT if not config.epg.netmed.value: mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER) if not config.epg.virgin.value: mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE) eEPGCache.getInstance().setEpgSources(mask) config.epg.eit.addNotifier(EpgSettingsChanged) config.epg.mhw.addNotifier(EpgSettingsChanged) config.epg.freesat.addNotifier(EpgSettingsChanged) config.epg.viasat.addNotifier(EpgSettingsChanged) config.epg.netmed.addNotifier(EpgSettingsChanged) config.epg.virgin.addNotifier(EpgSettingsChanged) config.epg.maxdays = ConfigSelectionNumber(min = 1, max = 28, stepwidth = 1, default = 5, wraparound = True) def EpgmaxdaysChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgmaxdays(config.epg.maxdays.getValue()) config.epg.maxdays.addNotifier(EpgmaxdaysChanged) config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True) def EpgHistorySecondsChanged(configElement): from enigma import eEPGCache eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60) config.epg.histminutes.addNotifier(EpgHistorySecondsChanged) def setHDDStandby(configElement): for hdd in harddiskmanager.HDDList(): hdd[1].setIdleTime(int(configElement.value)) config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False) if SystemInfo["12V_Output"]: def set12VOutput(configElement): Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0) config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False) config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml")) config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml")) config.network = ConfigSubsection() if SystemInfo["WakeOnLAN"]: def wakeOnLANChanged(configElement): if getBoxType() in ('et7000', 'et7500', 'gbx1', 'gbx3', 'et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbultraue', 'gbultrase', 'gbipbox', 'quadbox2400', 'mutant2400', 'et7x00', 'et8500', 'et8500s'): open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off") else: open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable") config.network.wol = ConfigYesNo(default = False) config.network.wol.addNotifier(wakeOnLANChanged) config.network.Inadyn_autostart = ConfigYesNo(default = False) config.network.OpenVPN_autostart = ConfigYesNo(default = False) config.seek = ConfigSubsection() config.seek.selfdefined_13 = ConfigNumber(default=15) config.seek.selfdefined_46 = ConfigNumber(default=60) config.seek.selfdefined_79 = ConfigNumber(default=300) config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128]) config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25]) config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"]) config.seek.on_pause = ConfigSelection(default = "play", choices = [ ("play", _("Play")), ("step", _("Single step (GOP)")), ("last", _("Last speed")) ]) config.crash = ConfigSubsection() config.crash.details = ConfigYesNo(default = False) debugpath = [('/home/root/logs/', '/home/root/')] for p in harddiskmanager.getMountedPartitions(): if os.path.exists(p.mountpoint): d = os.path.normpath(p.mountpoint) if p.mountpoint != '/': debugpath.append((p.mountpoint + 'logs/', d)) config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath) if not os.path.exists("/home"): os.mkdir("/home",0755) if not os.path.exists("/home/root"): os.mkdir("/home/root",0755) def updatedebug_path(configElement): if not os.path.exists(config.crash.debug_path.value): try: os.mkdir(config.crash.debug_path.value,0755) except: print "Failed to create log path: %s" % config.crash.debug_path.value config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False) crashlogheader = "We are really sorry. Your receiver encountered " \ "a software problem, and needs to be restarted.\n" \ "Please send the logfile %senigma2_crash_xxxxxx.log to http://openspa.info.\n" \ "Your receiver restarts in 10 seconds!\n" \ "Component: enigma2" % config.crash.debug_path.value config.crash.debug_text = ConfigText(default=_(crashlogheader), fixed_size=False) config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))]) def updateEnterForward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_forward, configElement.value) config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False) def updateEnterBackward(configElement): if not configElement.value: configElement.value = [2] updateChoices(config.seek.enter_backward, configElement.value) config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False) def updateEraseSpeed(el): eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value)) def updateEraseFlags(el): eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value)) config.misc.erase_speed = ConfigSelection(default="20", choices = [ ("10", "10 MB/s"), ("20", "20 MB/s"), ("50", "50 MB/s"), ("100", "100 MB/s")]) config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False) config.misc.erase_flags = ConfigSelection(default="1", choices = [ ("0", _("Disable")), ("1", _("Internal hdd only")), ("3", _("Everywhere"))]) config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False) if SystemInfo["ZapMode"]: def setZapmode(el): open(SystemInfo["ZapMode"], "w").write(el.value) config.misc.zapmode = ConfigSelection(default = "mute", choices = [ ("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))]) config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False) if SystemInfo["HasForceLNBOn"]: def forceLNBPowerChanged(configElement): open(SystemInfo["HasForceLNBOn"], "w").write(configElement.value) config.misc.forceLnbPower = ConfigSelection(default = "on", choices = [ ("on", _("Yes")), ("off", _("No"))] ) config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged) if SystemInfo["HasForceToneburst"]: def forceToneBurstChanged(configElement): open(SystemInfo["HasForceToneburst"], "w").write(configElement.value) config.misc.forceToneBurst = ConfigSelection(default = "enable", choices = [ ("enable", _("Yes")), ("disable", _("No"))] ) config.misc.forceToneBurst.addNotifier(forceToneBurstChanged) config.subtitles = ConfigSubsection() config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("original")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False) config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50") config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center") config.subtitles.subtitle_rewrap = ConfigYesNo(default = False) config.subtitles.colourise_dialogs = ConfigYesNo(default = False) config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3") config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40") config.subtitles.showbackground = ConfigYesNo(default = False) subtitle_delay_choicelist = [] for i in range(-900000, 1845000, 45000): if i == 0: subtitle_delay_choicelist.append(("0", _("No delay"))) else: subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.))) config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False) config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))]) config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False) config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [ ("0", _("No transparency")), ("25", "10%"), ("50", "20%"), ("75", "30%"), ("100", "40%"), ("125", "50%"), ("150", "60%"), ("175", "70%"), ("200", "80%"), ("225", "90%"), ("255", _("Full transparency"))]) config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [ ("0", _("alternative")), ("1", _("white")), ("2", _("yellow")) ]) config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True) config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist) config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [ ("1", _("Original")), ("23976", _("23.976")), ("24000", _("24")), ("25000", _("25")), ("29970", _("29.97")), ("30000", _("30"))]) config.subtitles.pango_autoturnon = ConfigYesNo(default = True) config.autolanguage = ConfigSubsection() audio_language_choices=[ ("---", _("None")), ("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")), ("ara", _("Arabic")), ("eus baq", _("Basque")), ("bul", _("Bulgarian")), ("hrv", _("Croatian")), ("chn sgp", _("Simplified Chinese")), ("twn hkn", _("Traditional Chinese")), ("ces cze", _("Czech")), ("dan", _("Danish")), ("dut ndl", _("Dutch")), ("eng qaa", _("English")), ("est", _("Estonian")), ("fin", _("Finnish")), ("fra fre", _("French")), ("deu ger", _("German")), ("ell gre", _("Greek")), ("heb", _("Hebrew")), ("hun", _("Hungarian")), ("ita", _("Italian")), ("lav", _("Latvian")), ("lit", _("Lithuanian")), ("ltz", _("Luxembourgish")), ("nor", _("Norwegian")), ("pol", _("Polish")), ("por dub DUB ud1", _("Portuguese")), ("fas per", _("Persian")), ("ron rum", _("Romanian")), ("rus", _("Russian")), ("srp", _("Serbian")), ("slk slo", _("Slovak")), ("slv", _("Slovenian")), ("spa", _("Spanish")), ("swe", _("Swedish")), ("tha", _("Thai")), ("tur Audio_TUR", _("Turkish"))] def setEpgLanguage(configElement): eServiceEvent.setEPGLanguage(configElement.value) config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage) def setEpgLanguageAlternative(configElement): eServiceEvent.setEPGLanguageAlternative(configElement.value) config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---") config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative) config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---") config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False) config.autolanguage.audio_defaultddp = ConfigYesNo(default = False) config.autolanguage.audio_usecache = ConfigYesNo(default = True) subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:] config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---") config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False) config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False) config.autolanguage.subtitle_usecache = ConfigYesNo(default = True) config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [ ("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"), ("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"), ("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"), ("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))]) config.streaming = ConfigSubsection() config.streaming.stream_ecm = ConfigYesNo(default = False) config.streaming.descramble = ConfigYesNo(default = True) config.streaming.descramble_client = ConfigYesNo(default = False) config.streaming.stream_eit = ConfigYesNo(default = True) config.streaming.stream_ait = ConfigYesNo(default = True) config.streaming.authentication = ConfigYesNo(default = False) config.mediaplayer = ConfigSubsection() config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False) config.mediaplayer.alternateUserAgent = ConfigText(default="") #config.osd = ConfigSubsection() config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False) config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False) config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.osd.alpha_teletext = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.osd.alpha_webbrowser = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False) config.av.osd_alpha = NoSave(ConfigNumber(default = 255)) config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto") config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100)) config.osd.show3dextensions = ConfigYesNo(default = False) choiceoptions = [("mode1", _("Mode 1")), ("mode2", _("Mode 2"))] config.osd.threeDsetmode = ConfigSelection(default = 'mode1' , choices = choiceoptions )
def InitAVSwitch(): if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'): config.av.yuvenabled = ConfigBoolean(default=False) else: config.av.yuvenabled = ConfigBoolean(default=True) config.av.osd_alpha = ConfigSlider( default=255, increment=5, limits=(20, 255) ) # Make openHDF compatible with some plugins who still use config.av.osd_alpha colorformat_choices = { "cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video") } # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.autores = ConfigSelection(choices={ "disabled": _("Disabled"), "simple": _("Simple"), "native": _("Native"), "all": _("All resolutions"), "hd": _("only HD") }, default="disabled") config.av.autores_preview = NoSave(ConfigYesNo(default=False)) config.av.autores_1080i_deinterlace = ConfigYesNo(default=False) choicelist = { "24,24": _("24p/24p"), "24,25": _("24p/25p"), "24,30": _("24p/30p"), "24,50": _("24p/50p"), "24,60": _("24p/60p"), "25,24": _("25p/24p"), "30,24": _("30p/24p"), "50,24": _("50p/24p"), "60,24": _("60p/24p"), "25,25": _("25p/25p"), "25,30": _("25p/30p"), "25,50": _("25p/50p"), "25,60": _("25p/60p"), "30,25": _("30p/25p"), "50,25": _("50p/25p"), "60,25": _("60p/25p"), "30,30": _("30p/30p"), "30,50": _("30p/50p"), "30,60": _("30p/60p"), "50,30": _("50p/30p"), "60,30": _("60p/30p"), "50,50": _("50p/50p"), "50,60": _("50p/60p"), "60,50": _("60p/50p"), "60,60": _("60p/60p") } # first value <=720p , second value > 720p config.av.autores_24p = ConfigSelection(choices=choicelist, default="50,24") config.av.autores_25p = ConfigSelection(choices=choicelist, default="50,25") config.av.autores_30p = ConfigSelection(choices=choicelist, default="60,30") config.av.autores_unknownres = ConfigSelection(choices={ "next": _("next higher Resolution"), "highest": _("highest Resolution") }, default="next") choicelist = [] for i in range(5, 16): choicelist.append( ("%d" % i, ngettext("%d second", "%d seconds", i) % i)) config.av.autores_label_timeout = ConfigSelection( default="5", choices=[("0", _("Not Shown"))] + choicelist) config.av.autores_delay = ConfigSelectionNumber(min=0, max=3000, stepwidth=50, default=400, wraparound=True) config.av.autores_deinterlace = ConfigYesNo(default=False) config.av.autores_sd = ConfigSelection(choices={ "720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i") }, default="720p50") config.av.autores_480p24 = ConfigSelection(choices={ "480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz") }, default="1080p24") config.av.autores_720p24 = ConfigSelection(choices={ "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz") }, default="720p24") config.av.autores_1080p24 = ConfigSelection(choices={ "1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz") }, default="1080p24") config.av.autores_1080p25 = ConfigSelection(choices={ "1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz") }, default="1080p25") config.av.autores_1080p30 = ConfigSelection(choices={ "1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz") }, default="1080p30") config.av.smart1080p = ConfigSelection(choices={ "false": _("off"), "true": _("1080p50: 24p/50p/60p"), "2160p50": _("2160p50: 24p/50p/60p"), "1080i50": _("1080i50: 24p/50i/60i"), "720p50": _("720p50: 24p/50p/60p") }, default="false") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4:3": _("4:3"), "16:9": _("16:9"), "16:10": _("16:10"), "auto": _("Automatic") }, default="16:9") if getBoxType() == 'inihde': config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="yuv") else: config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale") } if os.path.exists("/proc/stb/video/policy2_choices"): f = open("/proc/stb/video/policy2_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) f.close() config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "panscan": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "letterbox": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) # "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "bestfit": _("Just scale") } if os.path.exists("/proc/stb/video/policy_choices"): f = open("/proc/stb/video/policy_choices") if "auto" in f.readline(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) f.close() config.av.policy_43 = ConfigSelection(choices=policy_choices, default="panscan") config.av.tvsystem = ConfigSelection(choices={ "pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm") }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) #config.av.aspect.setValue('16:9') config.av.aspect.addNotifier(iAVSwitch.setAspect) config.av.wss.addNotifier(iAVSwitch.setWss) config.av.policy_43.addNotifier(iAVSwitch.setPolicy43) config.av.policy_169.addNotifier(iAVSwitch.setPolicy169) def setColorFormat(configElement): if config.av.videoport and config.av.videoport.value in ( "YPbPr", "Scart-YPbPr"): iAVSwitch.setColorFormat(3) elif config.av.videoport and config.av.videoport.value in ("RCA"): iAVSwitch.setColorFormat(0) else: if getBoxType() == 'et6x00': map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3} elif getBoxType() == 'gbquad' or getBoxType( ) == 'gbquadplus' or getBoxType().startswith('et'): map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3} else: map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) config.av.colorformat.addNotifier(setColorFormat) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) iAVSwitch.setInput("ENCODER") # init on startup if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue', 'gbultraueh', 'twinboxlcd')) or about.getModelString() == 'et6000': detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"): f = open("/proc/stb/hdmi/bypass_edid_checking", "r") can_edidchecking = f.read().strip().split(" ") f.close() else: can_edidchecking = False SystemInfo["Canedidchecking"] = can_edidchecking if can_edidchecking: def setEDIDBypass(configElement): try: f = open("/proc/stb/hdmi/bypass_edid_checking", "w") f.write(configElement.value) f.close() except: pass config.av.bypass_edid_checking = ConfigSelection(choices={ "00000000": _("off"), "00000001": _("on") }, default="00000001") config.av.bypass_edid_checking.addNotifier(setEDIDBypass) else: config.av.bypass_edid_checking = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorspace"): f = open("/proc/stb/video/hdmi_colorspace", "r") have_colorspace = f.read().strip().split(" ") f.close() else: have_colorspace = False SystemInfo["havecolorspace"] = have_colorspace if have_colorspace: def setHDMIColorspace(configElement): try: f = open("/proc/stb/video/hdmi_colorspace", "w") f.write(configElement.value) f.close() except: pass if getBoxType() in ('vusolo4k', 'vuuno4k', 'vuultimo4k'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "444": _("YCbCr444"), "422": _("YCbCr422"), "420": _("YCbCr420") }, default="Edid(Auto)") elif getBoxType() in ('dm900'): config.av.hdmicolorspace = ConfigSelection(choices={ "Edid(Auto)": _("Auto"), "Hdmi_Rgb": _("RGB"), "Itu_R_BT_709": _("BT709"), "DVI_Full_Range_RGB": _("Full Range RGB"), "FCC": _("FCC 1953"), "Itu_R_BT_470_2_BG": _("BT470 BG"), "Smpte_170M": _("Smpte 170M"), "Smpte_240M": _("Smpte 240M"), "Itu_R_BT_2020_NCL": _("BT2020 NCL"), "Itu_R_BT_2020_CL": _("BT2020 CL"), "XvYCC_709": _("BT709 XvYCC"), "XvYCC_601": _("BT601 XvYCC") }, default="Edid(Auto)") else: config.av.hdmicolorspace = ConfigSelection(choices={ "auto": _("auto"), "rgb": _("rgb"), "420": _("420"), "422": _("422"), "444": _("444") }, default="auto") config.av.hdmicolorspace.addNotifier(setHDMIColorspace) else: config.av.hdmicolorspace = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colorimetry"): f = open("/proc/stb/video/hdmi_colorimetry", "r") have_colorimetry = f.read().strip().split(" ") f.close() else: have_colorimetry = False SystemInfo["havecolorimetry"] = have_colorimetry if have_colorimetry: def setHDMIColorimetry(configElement): sleep(0.1) try: f = open("/proc/stb/video/hdmi_colorimetry", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolorimetry = ConfigSelection(choices={ "auto": _("auto"), "bt2020ncl": _("BT 2020 NCL"), "bt2020cl": _("BT 2020 CL"), "bt709": _("BT 709") }, default="auto") config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry) else: config.av.hdmicolorimetry = ConfigNothing() if os.path.exists("/proc/stb/info/boxmode"): f = open("/proc/stb/info/boxmode", "r") have_boxmode = f.read().strip().split(" ") f.close() else: have_boxmode = False SystemInfo["haveboxmode"] = have_boxmode if have_boxmode: def setBoxmode(configElement): try: f = open("/proc/stb/info/boxmode", "w") f.write(configElement.value) f.close() except: pass config.av.boxmode = ConfigSelection(choices={ "12": _("enable PIP no HDR"), "1": _("12bit 4:2:0/4:2:2 no PIP") }, default="12") config.av.boxmode.addNotifier(setBoxmode) else: config.av.boxmode = ConfigNothing() if os.path.exists("/proc/stb/video/hdmi_colordepth"): f = open("/proc/stb/video/hdmi_colordepth", "r") have_HdmiColordepth = f.read().strip().split(" ") f.close() else: have_HdmiColordepth = False SystemInfo["havehdmicolordepth"] = have_HdmiColordepth if have_HdmiColordepth: def setHdmiColordepth(configElement): try: f = open("/proc/stb/video/hdmi_colordepth", "w") f.write(configElement.value) f.close() except: pass config.av.hdmicolordepth = ConfigSelection(choices={ "auto": _("Auto"), "8bit": _("8bit"), "10bit": _("10bit"), "12bit": _("12bit") }, default="auto") config.av.hdmicolordepth.addNotifier(setHdmiColordepth) else: config.av.hdmicolordepth = ConfigNothing() if os.path.exists("/proc/stb/hdmi/audio_source"): f = open("/proc/stb/hdmi/audio_source", "r") can_audiosource = f.read().strip().split(" ") f.close() else: can_audiosource = False SystemInfo["Canaudiosource"] = can_audiosource if can_audiosource: def setAudioSource(configElement): try: f = open("/proc/stb/hdmi/audio_source", "w") f.write(configElement.value) f.close() except: pass config.av.audio_source = ConfigSelection(choices={ "pcm": _("PCM"), "spdif": _("SPDIF") }, default="pcm") config.av.audio_source.addNotifier(setAudioSource) else: config.av.audio_source = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_choices"): f = open("/proc/stb/audio/3d_surround_choices", "r") can_3dsurround = f.read().strip().split(" ") f.close() else: can_3dsurround = False SystemInfo["Can3DSurround"] = can_3dsurround if can_3dsurround: def set3DSurround(configElement): f = open("/proc/stb/audio/3d_surround", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.surround_3d = ConfigSelection(choices=choice_list, default="none") config.av.surround_3d.addNotifier(set3DSurround) else: config.av.surround_3d = ConfigNothing() if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"): f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r") can_3dsurround_speaker = f.read().strip().split(" ") f.close() else: can_3dsurround_speaker = False SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker if can_3dsurround_speaker: def set3DSurroundSpeaker(configElement): f = open("/proc/stb/audio/3d_surround_speaker_position", "w") f.write(configElement.value) f.close() choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))] config.av.surround_3d_speaker = ConfigSelection(choices=choice_list, default="center") config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) else: config.av.surround_3d_speaker = ConfigNothing() if os.path.exists("/proc/stb/audio/avl_choices"): f = open("/proc/stb/audio/avl_choices", "r") can_autovolume = f.read().strip().split(" ") f.close() else: can_autovolume = False SystemInfo["CanAutoVolume"] = can_autovolume if can_autovolume: def setAutoVolume(configElement): f = open("/proc/stb/audio/avl", "w") f.write(configElement.value) f.close() choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] config.av.autovolume = ConfigSelection(choices=choice_list, default="none") config.av.autovolume.addNotifier(setAutoVolume) else: config.av.autovolume = ConfigNothing() if SystemInfo["HasMultichannelPCM"]: def setPCMMultichannel(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default=False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: SystemInfo["CanDownmixAC3"] = "downmix" in open( "/proc/stb/audio/ac3_choices", "r").read() except: SystemInfo["CanDownmixAC3"] = False if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default=True) config.av.downmix_ac3.addNotifier(setAC3Downmix) if os.path.exists("/proc/stb/audio/ac3plus_choices"): f = open("/proc/stb/audio/ac3plus_choices", "r") can_ac3plustranscode = f.read().strip().split(" ") f.close() else: can_ac3plustranscode = False SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode if can_ac3plustranscode: def setAC3plusTranscode(configElement): f = open("/proc/stb/audio/ac3plus", "w") f.write(configElement.value) f.close() choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("always"))] config.av.transcodeac3plus = ConfigSelection(choices=choice_list, default="use_hdmi_caps") config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) try: f = open("/proc/stb/audio/dtshd_choices", "r") file = f.read()[:-1] can_dtshd = f.read().strip().split(" ") f.close() except: can_dtshd = False SystemInfo["CanDTSHD"] = can_dtshd if can_dtshd: def setDTSHD(configElement): f = open("/proc/stb/audio/dtshd", "w") f.write(configElement.value) f.close() if getBoxType() in ("dm7080", "dm820"): choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="use_hdmi_caps") else: choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.dtshd = ConfigSelection(choices=choice_list, default="hdmi_best") config.av.dtshd.addNotifier(setDTSHD) try: f = open("/proc/stb/audio/wmapro_choices", "r") file = f.read()[:-1] can_wmapro = f.read().strip().split(" ") f.close() except: can_wmapro = False SystemInfo["CanWMAPRO"] = can_wmapro if can_wmapro: def setWMAPRO(configElement): f = open("/proc/stb/audio/wmapro", "w") f.write(configElement.value) f.close() choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] config.av.wmapro = ConfigSelection(choices=choice_list, default="hdmi_best") config.av.wmapro.addNotifier(setWMAPRO) try: f = open("/proc/stb/audio/dts_choices", "r") file = f.read()[:-1] f.close() can_downmix_dts = "downmix" in file except: can_downmix_dts = False SystemInfo["CanDownmixDTS"] = can_downmix_dts if can_downmix_dts: def setDTSDownmix(configElement): f = open("/proc/stb/audio/dts", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_dts = ConfigYesNo(default=True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: f = open("/proc/stb/audio/aac_choices", "r") file = f.read()[:-1] f.close() can_downmix_aac = "downmix" in file except: can_downmix_aac = False SystemInfo["CanDownmixAAC"] = can_downmix_aac if can_downmix_aac: def setAACDownmix(configElement): f = open("/proc/stb/audio/aac", "w") f.write(configElement.value and "downmix" or "passthrough") f.close() config.av.downmix_aac = ConfigYesNo(default=True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices=choice_list, default="off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w") f.write("%0.8X\n" % myval) f.close() f = open("/proc/stb/vmpeg/0/pep_apply", "w") f.write("1") f.close() except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0, 26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default=False) iAVSwitch.setConfiguredMode()
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")} # when YUV is not enabled, don't let the user select it if config.av.yuvenabled.value: colorformat_choices["yuv"] = _("YPbPr") config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": _("16:9"), "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox")}, default = "16_9") config.av.aspect = ConfigSelection(choices={ "4_3": _("4:3"), "16_9": _("16:9"), "16_10": _("16:10"), "auto": _("Automatic")}, default = "auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) "nonlinear": _("Nonlinear"), # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect) "scale": _("Just scale")} try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect. policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "pillarbox") config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal") config.av.wss = ConfigEnableDisable(default = True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0) config.av.vcrswitch = ConfigEnableDisable(default = False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6} iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm" : 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup if getBoxType() in ('gbquad4k', 'gbquad', 'gbquadplus', 'gb800seplus', 'gb800ueplus', 'gbipbox', 'gbultra', 'gbultraue', 'gbultraueh', 'gbultrase', 'spycat', 'gbx1', 'gbx2', 'gbx3', 'gbx3h'): detected = False else: detected = eAVSwitch.getInstance().haveScartSwitch() SystemInfo["ScartSwitch"] = detected if SystemInfo["HasMultichannelPCM"]: def setPCMMultichannel(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.pcm_multichannel = ConfigYesNo(default = False) config.av.pcm_multichannel.addNotifier(setPCMMultichannel) try: SystemInfo["CanDownmixAC3"] = "downmix" in open("/proc/stb/audio/ac3_choices", "r").read() except: SystemInfo["CanDownmixAC3"] = False if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_ac3 = ConfigYesNo(default = True) config.av.downmix_ac3.addNotifier(setAC3Downmix) try: SystemInfo["CanDownmixDTS"] = "downmix" in open("/proc/stb/audio/dts_choices", "r").read() except: SystemInfo["CanDownmixDTS"] = False if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_dts = ConfigYesNo(default = True) config.av.downmix_dts.addNotifier(setDTSDownmix) try: SystemInfo["CanDownmixAAC"] = "downmix" in open("/proc/stb/audio/aac_choices", "r").read() except: SystemInfo["CanDownmixAAC"] = False if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough") config.av.downmix_aac = ConfigYesNo(default = True) config.av.downmix_aac.addNotifier(setAACDownmix) if os.path.exists("/proc/stb/audio/aac_transcode_choices"): f = open("/proc/stb/audio/aac_transcode_choices", "r") can_aactranscode = f.read().strip().split(" ") f.close() else: can_aactranscode = False SystemInfo["CanAACTranscode"] = can_aactranscode if can_aactranscode: def setAACTranscode(configElement): f = open("/proc/stb/audio/aac_transcode", "w") f.write(configElement.value) f.close() choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off") config.av.transcodeaac.addNotifier(setAACTranscode) else: config.av.transcodeaac = ConfigNothing() try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255)) config.av.osd_alpha.addNotifier(setAlpha) if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"): def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" if getBoxType() in ('gbquad4k', 'gbquad', 'gbquadplus'): config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26)) else: config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) config.av.edid_override = ConfigYesNo(default = True) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default = False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) config.av.autovolume = ConfigSelection(default = "none", choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default = False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) config.av.surround_3d = ConfigSelection(default = "none", choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default = "center", choices = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection(default = "disabled", choices = [("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default = False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)
def InitAVSwitch(): config.av = ConfigSubsection() config.av.yuvenabled = ConfigBoolean(default=True) colorformat_choices = {"cvbs": "CVBS"} # when YUV, Scart or S-Video is not support by HW, don't let the user select it if SystemInfo["HasYPbPr"]: colorformat_choices["yuv"] = "YPbPr" if SystemInfo["HasScart"]: colorformat_choices["rgb"] = "RGB" if SystemInfo["HasSVideo"]: colorformat_choices["svideo"] = "S-Video" config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="cvbs") config.av.aspectratio = ConfigSelection(choices={ "4_3_letterbox": _("4:3 Letterbox"), "4_3_panscan": _("4:3 PanScan"), "16_9": "16:9", "16_9_always": _("16:9 always"), "16_10_letterbox": _("16:10 Letterbox"), "16_10_panscan": _("16:10 PanScan"), "16_9_letterbox": _("16:9 Letterbox") }, default="16_9") config.av.aspect = ConfigSelection(choices={ "4_3": "4:3", "16_9": "16:9", "16_10": "16:10", "auto": _("automatic") }, default="auto") policy2_choices = { # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term. "letterbox": _("Letterbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "full" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy2_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy2_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy2_choices.update({"auto": _("Auto")}) except: pass config.av.policy_169 = ConfigSelection(choices=policy2_choices, default="letterbox") policy_choices = { # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term. "pillarbox": _("Pillarbox"), # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term "panscan": _("Pan&scan"), # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible) "scale": _("Just scale") } try: if "nonlinear" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right) policy_choices.update({"nonlinear": _("Nonlinear")}) except: pass try: if "full" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio) policy_choices.update({"full": _("Full screen")}) except: pass try: if "auto" in open("/proc/stb/video/policy_choices").read(): # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode) policy_choices.update({"auto": _("Auto")}) except: pass config.av.policy_43 = ConfigSelection(choices=policy_choices, default="pillarbox") config.av.tvsystem = ConfigSelection(choices={ "pal": "PAL", "ntsc": "NTSC", "multinorm": "multinorm" }, default="pal") config.av.wss = ConfigEnableDisable(default=True) config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.vcrswitch = ConfigEnableDisable(default=False) iAVSwitch = AVSwitch() def setColorFormat(configElement): map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3} iAVSwitch.setColorFormat(map[configElement.value]) def setAspectRatio(configElement): map = { "4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox": 6 } iAVSwitch.setAspectRatio(map[configElement.value]) def setSystem(configElement): map = {"pal": 0, "ntsc": 1, "multinorm": 2} iAVSwitch.setSystem(map[configElement.value]) def setWSS(configElement): iAVSwitch.setAspectWSS() # this will call the "setup-val" initial config.av.colorformat.addNotifier(setColorFormat) config.av.aspectratio.addNotifier(setAspectRatio) config.av.tvsystem.addNotifier(setSystem) config.av.wss.addNotifier(setWSS) iAVSwitch.setInput("ENCODER") # init on startup SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch() def readChoices(procx, choices, default): try: with open(procx, "r") as myfile: procChoices = myfile.read().strip() except: procChoices = "" if procChoices: choiceslist = procChoices.split(" ") choices = [(item, _(item)) for item in choiceslist] default = choiceslist[0] return (choices, default) if SystemInfo["HasMultichannelPCM"]: def setMultichannelPCM(configElement): open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable") config.av.multichannel_pcm = ConfigYesNo(default=False) config.av.multichannel_pcm.addNotifier(setMultichannelPCM) if SystemInfo["CanDownmixAC3"]: def setAC3Downmix(configElement): open("/proc/stb/audio/ac3", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_ac3 = ConfigSelection(choices=choices, default=default) config.av.downmix_ac3.addNotifier(setAC3Downmix) if SystemInfo["CanAC3Transcode"]: def setAC3plusTranscode(configElement): open("/proc/stb/audio/ac3plus", "w").write(configElement.value) choices = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))] default = "force_ac3" if SystemInfo["CanProc"]: f = "/proc/stb/audio/ac3plus_choices" (choices, default) = readChoices(f, choices, default) config.av.transcodeac3plus = ConfigSelection(choices=choices, default=default) config.av.transcodeac3plus.addNotifier(setAC3plusTranscode) if SystemInfo["CanDownmixDTS"]: def setDTSDownmix(configElement): open("/proc/stb/audio/dts", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dts_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_dts = ConfigSelection(choices=choices, default=default) config.av.downmix_dts.addNotifier(setDTSDownmix) if SystemInfo["CanDTSHD"]: def setDTSHD(configElement): open("/proc/stb/audio/dtshd", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/dtshd_choices" (choices, default) = readChoices(f, choices, default) config.av.dtshd = ConfigSelection(choices=choices, default=default) config.av.dtshd.addNotifier(setDTSHD) if SystemInfo["CanDownmixAAC"]: def setAACDownmix(configElement): open("/proc/stb/audio/aac", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_aac = ConfigSelection(choices=choices, default=default) config.av.downmix_aac.addNotifier(setAACDownmix) if SystemInfo["CanDownmixAACPlus"]: def setAACDownmixPlus(configElement): open("/proc/stb/audio/aacplus", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aacplus_choices" (choices, default) = readChoices(f, choices, default) config.av.downmix_aacplus = ConfigSelection(choices=choices, default=default) config.av.downmix_aacplus.addNotifier(setAACDownmixPlus) if SystemInfo["CanAACTranscode"]: def setAACTranscode(configElement): open("/proc/stb/audio/aac_transcode", "w").write(configElement.value) choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/aac_transcode_choices" (choices, default) = readChoices(f, choices, default) config.av.transcodeaac = ConfigSelection(choices=choices, default=default) config.av.transcodeaac.addNotifier(setAACTranscode) if SystemInfo["CanWMAPRO"]: def setWMAPRO(configElement): open("/proc/stb/audio/wmapro", "w").write(configElement.value) choices = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))] default = "downmix" if SystemInfo["CanProc"]: f = "/proc/stb/audio/wmapro_choices" (choices, default) = readChoices(f, choices, default) config.av.wmapro = ConfigSelection(choices=choices, default=default) config.av.wmapro.addNotifier(setWMAPRO) if SystemInfo["CanBTAudio"]: def setBTAudio(configElement): open("/proc/stb/audio/btaudio", "w").write(configElement.value) choices = [("off", _("Off")), ("on", _("On"))] default = "off" if SystemInfo["CanProc"]: f = "/proc/stb/audio/btaudio_choices" (choices, default) = readChoices(f, choices, default) config.av.btaudio = ConfigSelection(choices=choices, default="off") config.av.btaudio.addNotifier(setBTAudio) if SystemInfo["CanBTAudioDelay"]: def setBTAudioDelay(configElement): try: with open(SystemInfo["CanBTAudioDelay"], "w") as fd: fd.write(format(configElement.value * 90, "x")) except: SystemInfo["CanBTAudioDelay"] = False config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default=0) config.av.btaudiodelay.addNotifier(setBTAudioDelay) try: SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False except: SystemInfo["CanChangeOsdAlpha"] = False if SystemInfo["CanChangeOsdAlpha"]: def setAlpha(config): open("/proc/stb/video/alpha", "w").write(str(config.value)) config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255)) config.av.osd_alpha.addNotifier(setAlpha) if SystemInfo["HasScaler_sharpness"]: def setScaler_sharpness(config): myval = int(config.value) try: print "--> setting scaler_sharpness to: %0.8X" % myval open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval) open("/proc/stb/vmpeg/0/pep_apply", "w").write("1") except IOError: print "couldn't write pep_scaler_sharpness" config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26)) config.av.scaler_sharpness.addNotifier(setScaler_sharpness) else: config.av.scaler_sharpness = NoSave(ConfigNothing()) if SystemInfo["HasAutoVolume"]: def setAutoVolume(configElement): open(SystemInfo["HasAutoVolume"], "w").write(configElement.value) choices = [("none", _("off")), ("hdmi", "HDMI"), ("spdif", "SPDIF"), ("dac", "DAC")] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/avl_choices" (choices, default) = readChoices(f, choices, default) config.av.autovolume = ConfigSelection(choices=choices, default=default) config.av.autovolume.addNotifier(setAutoVolume) if SystemInfo["HasAutoVolumeLevel"]: def setAutoVolumeLevel(configElement): open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled") config.av.autovolumelevel = ConfigYesNo(default=False) config.av.autovolumelevel.addNotifier(setAutoVolumeLevel) if SystemInfo["Has3DSurround"]: def set3DSurround(configElement): open(SystemInfo["Has3DSurround"], "w").write(configElement.value) choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))] default = "none" if SystemInfo["CanProc"]: f = "/proc/stb/audio/3d_surround_choices" (choices, default) = readChoices(f, choices, default) config.av.surround_3d = ConfigSelection(choices=choices, default=default) config.av.surround_3d.addNotifier(set3DSurround) if SystemInfo["Has3DSpeaker"]: def set3DSpeaker(configElement): open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value) config.av.speaker_3d = ConfigSelection(default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.speaker_3d.addNotifier(set3DSpeaker) if SystemInfo["Has3DSurroundSpeaker"]: def set3DSurroundSpeaker(configElement): open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value) config.av.surround_3d_speaker = ConfigSelection( default="center", choices=[("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]) config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker) if SystemInfo["Has3DSurroundSoftLimiter"]: def set3DSurroundSoftLimiter(configElement): open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled") config.av.surround_softlimiter_3d = ConfigYesNo(default=False) config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter) if SystemInfo["HDMIAudioSource"]: def setHDMIAudioSource(configElement): open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value) config.av.hdmi_audio_source = ConfigSelection(default="pcm", choices=[("pcm", "PCM"), ("spdif", "SPDIF")]) config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource) def setVolumeStepsize(configElement): eDVBVolumecontrol.getInstance().setVolumeSteps(int( configElement.value)) config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5) config.av.volume_stepsize.addNotifier(setVolumeStepsize) if SystemInfo["HasBypassEdidChecking"]: def setHasBypassEdidChecking(configElement): open(SystemInfo["HasBypassEdidChecking"], "w").write("00000001" if configElement.value else "00000000") config.av.bypassEdidChecking = ConfigYesNo(default=False) config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking) if SystemInfo["HasColorspace"]: def setHaveColorspace(configElement): open(SystemInfo["HasColorspace"], "w").write(configElement.value) if SystemInfo["HasColorspaceSimple"]: choices = [("Edid(Auto)", "auto"), ("Hdmi_Rgb", "RGB"), ("444", "YCbCr 4:4:4"), ("422", "YCbCr 4:2:2"), ("420", "YCbCr 4:2:0")] default = "Edid(Auto)" else: choices = [("auto", "auto"), ("rgb", "RGB"), ("420", "4:2:0"), ("422", "4:2:2"), ("444", "4:4:4")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colorspace_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorspace_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolorspace = ConfigSelection(choices=choices, default=default) config.av.hdmicolorspace.addNotifier(setHaveColorspace) if SystemInfo["HasColordepth"]: def setHaveColordepth(configElement): open(SystemInfo["HasColordepth"], "w").write(configElement.value) choices = [("auto", "auto"), ("8bit", "8bit"), ("10bit", "10bit"), ("12bit", "12bit")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colordepth_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colordepth_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolordepth = ConfigSelection(choices=choices, default=default) config.av.hdmicolordepth.addNotifier(setHaveColordepth) if SystemInfo["HasHDMIpreemphasis"]: def setHDMIpreemphasis(configElement): open(SystemInfo["HasHDMIpreemphasis"], "w").write("on" if configElement.value else "off") config.av.hdmipreemphasis = ConfigYesNo(default=False) config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis) if SystemInfo["HasColorimetry"]: def setColorimetry(configElement): open(SystemInfo["HasColorimetry"], "w").write(configElement.value) choices = [("auto", "auto"), ("bt2020ncl", "BT 2020 NCL"), ("bt2020cl", "BT 2020 CL"), ("bt709", "BT 709")] default = "auto" if os.path.exists("/proc/stb/video/hdmi_colorimetry_choices" ) and SystemInfo["CanProc"]: f = "/proc/stb/video/hdmi_colorimetry_choices" (choices, default) = readChoices(f, choices, default) config.av.hdmicolorimetry = ConfigSelection(choices=choices, default=default) config.av.hdmicolorimetry.addNotifier(setColorimetry) if SystemInfo["HasHdrType"]: def setHdmiHdrType(configElement): open(SystemInfo["HasHdrType"], "w").write(configElement.value) config.av.hdmihdrtype = ConfigSelection(default="auto", choices={ "auto": _("auto"), "none": "SDR", "hdr10": "HDR10", "hlg": "HLG", "dolby": "Dolby Vision" }) config.av.hdmihdrtype.addNotifier(setHdmiHdrType) if SystemInfo["HDRSupport"]: def setHlgSupport(configElement): open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value) config.av.hlg_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hlg_support.addNotifier(setHlgSupport) def setHdr10Support(configElement): open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value) config.av.hdr10_support = ConfigSelection( default="auto(EDID)", choices=[("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled"))]) config.av.hdr10_support.addNotifier(setHdr10Support) def setDisable12Bit(configElement): open("/proc/stb/video/disable_12bit", "w").write("1" if configElement.value else "0") config.av.allow_12bit = ConfigYesNo(default=False) config.av.allow_12bit.addNotifier(setDisable12Bit) def setDisable10Bit(configElement): open("/proc/stb/video/disable_10bit", "w").write("1" if configElement.value else "0") config.av.allow_10bit = ConfigYesNo(default=False) config.av.allow_10bit.addNotifier(setDisable10Bit)