def updateCalibrateMode(self, *sender):
glyphsList = []
newLine = self.w.lineView.createNewLineGlyph()
# cycle thru the UI Groups and collect the strings
for i in range(1, 5):
group = getattr(self.cm, "group%d" % i)
baseGlyphsNamesList = group.baseInput.get().split()
markGlyphsNamesList = group.markInput.get().split()
# iterate thru the base+mark combinations
for gBaseName, gMarkName in product(baseGlyphsNamesList,
markGlyphsNamesList):
newGlyph = RGlyph()
newGlyph.setParent(self.font)
# skip invalid glyph names
try:
baseGlyph = self.font[gBaseName]
markGlyph = self.font[gMarkName]
except Exception:
continue
# append base glyph
newGlyph = self.deepAppendGlyph(newGlyph, baseGlyph)
# append mark glyph
newGlyph = self.deepAppendGlyph(
newGlyph, markGlyph,
self.getAnchorOffsets(baseGlyph, markGlyph))
# set the advanced width
dfltSidebearings = self.upm * .05 # 5% of the UPM
newGlyph.leftMargin = dfltSidebearings + self.extraSidebearings[
0]
newGlyph.rightMargin = dfltSidebearings + self.extraSidebearings[
1]
# append the assembled glyph to the list
glyphsList.extend(self.extraGlyphsList)
glyphsList.append(newGlyph)
# add line break, if both input fields have content
if baseGlyphsNamesList and markGlyphsNamesList:
glyphsList.extend(self.extraGlyphsList)
glyphsList.append(newLine)
# update the contents of the MultiLineView
self.w.lineView.set(glyphsList)
def extraGlyphsCallback(self, *sender): del self.extraGlyphsList[:] # empty the list self.extraGlyphs = self.w.extraGlyphs.get() glyphNamesList = self.extraGlyphs.split() for gName in glyphNamesList: try: extraGlyph = self.font[gName] # must create a new glyph in order to be able to increase the sidebearings without modifying the font newGlyph = RGlyph() newGlyph.setParent(self.font) # must use deepAppend because the extra glyph may have components (which will cause problems to the MultiLineView) newGlyph = self.deepAppendGlyph(newGlyph, extraGlyph) newGlyph.width = extraGlyph.width except RoboFontError: continue newGlyph.leftMargin += self.extraSidebearings[0] newGlyph.rightMargin += self.extraSidebearings[1] self.extraGlyphsList.append(newGlyph) self.glyphPreviewCacheDict.clear() self.updateExtensionWindow()
def extraGlyphsCallback(self, *sender):
del self.extraGlyphsList[:] # empty the list
self.extraGlyphs = self.w.extraGlyphs.get()
glyphNamesList = self.extraGlyphs.split()
for gName in glyphNamesList:
try:
extraGlyph = self.font[gName]
# must create a new glyph in order to be able to increase the sidebearings without modifying the font
newGlyph = RGlyph()
newGlyph.setParent(self.font)
# must use deepAppend because the extra glyph may have components (which will cause problems to the MultiLineView)
newGlyph = self.deepAppendGlyph(newGlyph, extraGlyph)
newGlyph.width = extraGlyph.width
except Exception:
continue
newGlyph.leftMargin += self.extraSidebearings[0]
newGlyph.rightMargin += self.extraSidebearings[1]
self.extraGlyphsList.append(newGlyph)
self.glyphPreviewCacheDict.clear()
self.updateExtensionWindow()
def updateCalibrateMode(self, *sender): glyphsList = [] newLine = self.w.lineView.createNewLineGlyph() # cycle thru the UI Groups and collect the strings for i in range(1,5): group = getattr(self.cm, "group%d" % i) baseGlyphsNamesList = group.baseInput.get().split() markGlyphsNamesList = group.markInput.get().split() # iterate thru the base+mark combinations for gBaseName, gMarkName in product(baseGlyphsNamesList, markGlyphsNamesList): newGlyph = RGlyph() newGlyph.setParent(self.font) # skip invalid glyph names try: baseGlyph = self.font[gBaseName] markGlyph = self.font[gMarkName] except RoboFontError: continue # append base glyph newGlyph = self.deepAppendGlyph(newGlyph, baseGlyph) # append mark glyph newGlyph = self.deepAppendGlyph(newGlyph, markGlyph, self.getAnchorOffsets(baseGlyph, markGlyph)) # set the advanced width dfltSidebearings = self.upm * .05 # 5% of the UPM newGlyph.leftMargin = dfltSidebearings + self.extraSidebearings[0] newGlyph.rightMargin = dfltSidebearings + self.extraSidebearings[1] # append the assembled glyph to the list glyphsList.extend(self.extraGlyphsList) glyphsList.append(newGlyph) # add line break, if both input fields have content if baseGlyphsNamesList and markGlyphsNamesList: glyphsList.extend(self.extraGlyphsList) glyphsList.append(newLine) # update the contents of the MultiLineView self.w.lineView.set(glyphsList)
def updateExtensionWindow(self): if self.calibrateMode: self.updateCalibrateMode() return if CurrentGlyph() is not None: # NOTE: CurrentGlyph() will return zero (its length), so "is not None" is necessary self.glyph = CurrentGlyph() self.glyphNamesList = self.makeGlyphNamesList(self.glyph) self.updateListView() currentGlyphName = self.glyph.name # base glyph + accent combinations preview # first check if there's a cached glyph if currentGlyphName in self.glyphPreviewCacheDict: self.w.lineView.set(self.glyphPreviewCacheDict[currentGlyphName]) # assemble the glyphs else: glyphsList = [] for glyphNameInUIList in self.glyphNamesList: newGlyph = RGlyph() newGlyph.setParent(self.font) # the glyph in the UI list is a mark if glyphNameInUIList in self.marksDict: markGlyph = self.font[glyphNameInUIList] # append base glyph newGlyph = self.deepAppendGlyph(newGlyph, self.glyph) # append mark glyph newGlyph = self.deepAppendGlyph(newGlyph, markGlyph, self.getAnchorOffsets(self.glyph, markGlyph)) # set the advanced width if self.glyph.width < 10: # combining marks or other glyphs with a small advanced width newGlyph.leftMargin = self.upm * .05 # 5% of the UPM newGlyph.rightMargin = newGlyph.leftMargin else: newGlyph.width = self.glyph.width # the glyph in the UI list is a base else: baseGlyph = self.font[glyphNameInUIList] # append base glyph newGlyph = self.deepAppendGlyph(newGlyph, baseGlyph) # append mark glyph newGlyph = self.deepAppendGlyph(newGlyph, self.glyph, self.getAnchorOffsets(baseGlyph, self.glyph)) # set the advanced width if self.glyph.width < 10: # combining marks or other glyphs with a small advanced width newGlyph.leftMargin = self.upm * .05 newGlyph.rightMargin = newGlyph.leftMargin else: newGlyph.width = baseGlyph.width # pad the new glyph if it has too much overhang if newGlyph.leftMargin < self.upm * .15: newGlyph.leftMargin = self.upm * .05 if newGlyph.rightMargin < self.upm * .15: newGlyph.rightMargin = self.upm * .05 # add extra sidebearings newGlyph.leftMargin += self.extraSidebearings[0] newGlyph.rightMargin += self.extraSidebearings[1] # one last check for making sure the new glyph can be displayed if not newGlyph.components: glyphsList.extend(self.extraGlyphsList) glyphsList.append(newGlyph) else: print "Combination with mark glyph %s can't be previewed because it contains component %s." % (glyphNameInUIList, newGlyph.components[0].baseGlyph) glyphsList.extend(self.extraGlyphsList) self.w.lineView.set(glyphsList) # add to the cache self.glyphPreviewCacheDict[currentGlyphName] = glyphsList else: self.w.lineView.set([])
def updateExtensionWindow(self):
if self.calibrateMode:
self.updateCalibrateMode()
return
if CurrentGlyph(
) is not None: # NOTE: CurrentGlyph() will return zero (its length), so "is not None" is necessary
self.glyph = CurrentGlyph()
self.glyphNamesList = self.makeGlyphNamesList(self.glyph)
self.updateListView()
currentGlyphName = self.glyph.name
# base glyph + accent combinations preview
# first check if there's a cached glyph
if currentGlyphName in self.glyphPreviewCacheDict:
self.w.lineView.set(
self.glyphPreviewCacheDict[currentGlyphName])
# assemble the glyphs
else:
glyphsList = []
for glyphNameInUIList in self.glyphNamesList:
# trim the contextual portion of the UI glyph name
# and keep track of it
if CONTEXTUAL_ANCHOR_TAG in glyphNameInUIList:
cxtTagIndex = glyphNameInUIList.find(
CONTEXTUAL_ANCHOR_TAG)
glyphNameCXTportion = glyphNameInUIList[cxtTagIndex:]
glyphNameInUIList = glyphNameInUIList[:
cxtTagIndex] # this line must be last!
else:
glyphNameCXTportion = ''
newGlyph = RGlyph()
newGlyph.setParent(self.font)
# the glyph in the UI list is a mark
if glyphNameInUIList in self.marksDict:
markGlyph = self.font[glyphNameInUIList]
# append base glyph
newGlyph = self.deepAppendGlyph(newGlyph, self.glyph)
# append mark glyph
newGlyph = self.deepAppendGlyph(
newGlyph, markGlyph,
self.getAnchorOffsets(self.glyph, markGlyph,
glyphNameCXTportion))
# set the advanced width
if self.glyph.width < 10: # combining marks or other glyphs with a small advanced width
newGlyph.leftMargin = self.upm * .05 # 5% of the UPM
newGlyph.rightMargin = newGlyph.leftMargin
else:
newGlyph.width = self.glyph.width
# the glyph in the UI list is a base
else:
baseGlyph = self.font[glyphNameInUIList]
# append base glyph
newGlyph = self.deepAppendGlyph(newGlyph, baseGlyph)
# append mark glyph
newGlyph = self.deepAppendGlyph(
newGlyph, self.glyph,
self.getAnchorOffsets(baseGlyph, self.glyph))
# set the advanced width
if self.glyph.width < 10: # combining marks or other glyphs with a small advanced width
newGlyph.leftMargin = self.upm * .05
newGlyph.rightMargin = newGlyph.leftMargin
else:
newGlyph.width = baseGlyph.width
# pad the new glyph if it has too much overhang
if newGlyph.leftMargin < self.upm * .15:
newGlyph.leftMargin = self.upm * .05
if newGlyph.rightMargin < self.upm * .15:
newGlyph.rightMargin = self.upm * .05
# add extra sidebearings
newGlyph.leftMargin += self.extraSidebearings[0]
newGlyph.rightMargin += self.extraSidebearings[1]
# one last check for making sure the new glyph can be displayed
if not newGlyph.components:
glyphsList.extend(self.extraGlyphsList)
glyphsList.append(newGlyph)
else:
print(
"Combination with mark glyph %s can't be previewed because it contains component %s."
% (glyphNameInUIList + glyphNameCXTportion,
newGlyph.components[0].baseGlyph))
glyphsList.extend(self.extraGlyphsList)
self.w.lineView.set(glyphsList)
# add to the cache
self.glyphPreviewCacheDict[currentGlyphName] = glyphsList
else:
self.w.lineView.set([])