def main():
"""
NAME
zeq_magic_redo.py
DESCRIPTION
Calculate principal components through demagnetization data using bounds and calculation type stored in "redo" file
SYNTAX
zeq_magic_redo.py [command line options]
OPTIONS
-h prints help message
-usr USER: identify user, default is ""
-f: specify input file, default is magic_measurements.txt
-F: specify output file, default is zeq_specimens.txt
-fre REDO: specify redo file, default is "zeq_redo"
-fsa SAMPFILE: specify er_samples format file, default is "er_samples.txt"
-A : don't average replicate measurements, default is yes
-crd [s,g,t] :
specify coordinate system [s,g,t] [default is specimen coordinates]
are specimen, geographic, and tilt corrected respectively
NB: you must have a SAMPFILE in this directory to rotate from specimen coordinates
-leg: attaches "Recalculated from original measurements; supercedes published results. " to comment field
INPUTS
zeq_redo format file is:
specimen_name calculation_type[DE-BFL,DE-BFL-A,DE-BFL-O,DE-BFP,DE-FM] step_min step_max component_name[A,B,C]
"""
dir_path='.'
INCL=["LT-NO","LT-AF-Z","LT-T-Z","LT-M-Z"] # looking for demag data
beg,end,pole,geo,tilt,askave,save=0,0,[],0,0,0,0
user,doave,comment= "",1,""
geo,tilt=0,0
version_num=pmag.get_version()
args=sys.argv
if '-WD' in args:
ind=args.index('-WD')
dir_path=args[ind+1]
meas_file,pmag_file,mk_file= dir_path+"/"+"magic_measurements.txt",dir_path+"/"+"zeq_specimens.txt",dir_path+"/"+"zeq_redo"
samp_file,coord=dir_path+"/"+"er_samples.txt",""
if "-h" in args:
print main.__doc__
sys.exit()
if "-usr" in args:
ind=args.index("-usr")
user=sys.argv[ind+1]
if "-A" in args:doave=0
if "-leg" in args: comment="Recalculated from original measurements; supercedes published results. "
if "-f" in args:
ind=args.index("-f")
meas_file=dir_path+'/'+sys.argv[ind+1]
if "-F" in args:
ind=args.index("-F")
pmag_file=dir_path+'/'+sys.argv[ind+1]
if "-fre" in args:
ind=args.index("-fre")
mk_file=dir_path+"/"+args[ind+1]
try:
mk_f=open(mk_file,'rU')
except:
print "Bad redo file"
sys.exit()
mkspec,skipped=[],[]
speclist=[]
for line in mk_f.readlines():
tmp=line.split()
mkspec.append(tmp)
speclist.append(tmp[0])
if "-fsa" in args:
ind=args.index("-fsa")
samp_file=dir_path+'/'+sys.argv[ind+1]
if "-crd" in args:
ind=args.index("-crd")
coord=sys.argv[ind+1]
if coord=="g":geo,tilt=1,0
if coord=="t":geo,tilt=1,1
#
# now get down to bidness
if geo==1:
samp_data,file_type=pmag.magic_read(samp_file)
if file_type != 'er_samples':
print file_type
print "This is not a valid er_samples file "
sys.exit()
# set orientation priorities
SO_methods=[]
for rec in samp_data:
if "magic_method_codes" in rec:
methlist=rec["magic_method_codes"]
for meth in methlist.split(":"):
if "SO" in meth and "SO-POM" not in meth.strip():
if meth.strip() not in SO_methods: SO_methods.append(meth.strip())
SO_priorities=pmag.set_priorities(SO_methods,0)
#
#
#
meas_data,file_type=pmag.magic_read(meas_file)
if file_type != 'magic_measurements':
print file_type
print file_type,"This is not a valid magic_measurements file "
sys.exit()
#
# sort the specimen names
#
k = 0
print 'Processing ',len(speclist), ' specimens - please wait'
PmagSpecs=[]
while k < len(speclist):
s=speclist[k]
recnum=0
PmagSpecRec={}
method_codes,inst_codes=[],[]
# find the data from the meas_data file for this sample
#
# collect info for the PmagSpecRec dictionary
#
meas_meth=[]
for rec in meas_data: # copy of vital stats to PmagSpecRec from first spec record in demag block
skip=1
if rec["er_specimen_name"]==s:
methods=rec["magic_method_codes"].split(":")
if len(set(methods) & set(INCL))>0:
PmagSpecRec["er_analyst_mail_names"]=user
PmagSpecRec["magic_software_packages"]=version_num
PmagSpecRec["er_specimen_name"]=s
PmagSpecRec["er_sample_name"]=rec["er_sample_name"]
PmagSpecRec["er_site_name"]=rec["er_site_name"]
PmagSpecRec["er_location_name"]=rec["er_location_name"]
PmagSpecRec["er_citation_names"]="This study"
if "magic_experiment_name" not in rec.keys(): rec["magic_experiment_name"]=""
PmagSpecRec["magic_experiment_names"]=rec["magic_experiment_name"]
if "magic_instrument_codes" not in rec.keys(): rec["magic_instrument_codes"]=""
inst=rec['magic_instrument_codes'].split(":")
for I in inst:
if I not in inst_codes: # copy over instruments
inst_codes.append(I)
meths=rec["magic_method_codes"].split(":")
for meth in meths:
if meth.strip() not in meas_meth:meas_meth.append(meth)
if "LP-DIR-AF" in meas_meth or "LT-AF-Z" in meas_meth:
PmagSpecRec["measurement_step_unit"]="T"
if "LP-DIR-AF" not in method_codes:method_codes.append("LP-DIR-AF")
if "LP-DIR-T" in meas_meth or "LT-T-Z" in meas_meth:
PmagSpecRec["measurement_step_unit"]="K"
if "LP-DIR-T" not in method_codes:method_codes.append("LP-DIR-T")
if "LP-DIR-M" in meas_meth or "LT-M-Z" in meas_meth:
PmagSpecRec["measurement_step_unit"]="J"
if "LP-DIR-M" not in method_codes:method_codes.append("LP-DIR-M")
if PmagSpecRec=={}:
print 'no data found for specimen: ',s
print 'delete from zeq_redo input file...., then try again'
sys.exit()
#
#
data,units=pmag.find_dmag_rec(s,meas_data)
#
datablock=data
noskip=1
if len(datablock) <2 or s not in speclist :
noskip=0
k+=1
# print 'skipping ', s,len(datablock)
if noskip:
#
# find replicate measurements at given treatment step and average them
#
# step_meth,avedata=pmag.vspec(data)
#
# if len(avedata) != len(datablock):
# if doave==1:
# method_codes.append("DE-VM")
# datablock=avedata
#
# do geo or stratigraphic correction now
#
if geo==1:
# find top priority orientation method
redo,p=1,0
if len(SO_methods)<=1:
az_type=SO_methods[0]
orient=pmag.find_samp_rec(PmagSpecRec["er_sample_name"],samp_data,az_type)
if orient["sample_azimuth"] !="": method_codes.append(az_type)
redo=0
while redo==1:
if p>=len(SO_priorities):
print "no orientation data for ",s
orient["sample_azimuth"]=""
orient["sample_dip"]=""
method_codes.append("SO-NO")
redo=0
else:
az_type=SO_methods[SO_methods.index(SO_priorities[p])]
orient=pmag.find_samp_rec(PmagSpecRec["er_sample_name"],samp_data,az_type)
if orient["sample_azimuth"] !="":
method_codes.append(az_type)
redo=0
p+=1
#
# if tilt selected, get stratigraphic correction
#
tiltblock,geoblock=[],[]
for rec in datablock:
if "sample_azimuth" in orient.keys() and orient["sample_azimuth"]!="":
d_geo,i_geo=pmag.dogeo(rec[1],rec[2],orient["sample_azimuth"],orient["sample_dip"])
geoblock.append([rec[0],d_geo,i_geo,rec[3],rec[4],rec[5]])
if tilt==1 and "sample_bed_dip_direction" in orient.keys():
d_tilt,i_tilt=pmag.dotilt(d_geo,i_geo,orient["sample_bed_dip_direction"],orient["sample_bed_dip"])
tiltblock.append([rec[0],d_tilt,i_tilt,rec[3],rec[4],rec[5]])
elif tilt==1:
if PmagSpecRec["er_sample_name"] not in skipped:
print 'no tilt correction for ', PmagSpecRec["er_sample_name"],' skipping....'
skipped.append(PmagSpecRec["er_sample_name"])
else:
if PmagSpecRec["er_sample_name"] not in skipped:
print 'no geographic correction for ', PmagSpecRec["er_sample_name"],' skipping....'
skipped.append(PmagSpecRec["er_sample_name"])
#
# get beg_pca, end_pca, pca
if PmagSpecRec['er_sample_name'] not in skipped:
compnum=-1
for spec in mkspec:
if spec[0]==s:
CompRec={}
for key in PmagSpecRec.keys():CompRec[key]=PmagSpecRec[key]
compnum+=1
calculation_type=spec[1]
beg=float(spec[2])
end=float(spec[3])
if len(spec)>4:
comp_name=spec[4]
else:
comp_name=string.uppercase[compnum]
CompRec['specimen_comp_name']=comp_name
if beg < float(datablock[0][0]):beg=float(datablock[0][0])
if end > float(datablock[-1][0]):end=float(datablock[-1][0])
for l in range(len(datablock)):
if datablock[l][0]==beg:beg_pca=l
if datablock[l][0]==end:end_pca=l
if geo==1 and tilt==0:
mpars=pmag.domean(geoblock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
CompRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
CompRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
CompRec["specimen_tilt_correction"]='0'
if geo==1 and tilt==1:
mpars=pmag.domean(tiltblock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
CompRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
CompRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
CompRec["specimen_tilt_correction"]='100'
if geo==0 and tilt==0:
mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
CompRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
CompRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
CompRec["specimen_tilt_correction"]='-1'
if mpars["specimen_direction_type"]=="Error":
pass
else:
CompRec["measurement_step_min"]='%8.3e '%(datablock[beg_pca][0])
try:
CompRec["measurement_step_max"]='%8.3e '%(datablock[end_pca][0] )
except:
print 'error in end_pca ',PmagSpecRec['er_specimen_name']
CompRec["specimen_correction"]='u'
if calculation_type!='DE-FM':
CompRec["specimen_mad"]='%7.1f '%(mpars["specimen_mad"])
CompRec["specimen_alpha95"]=""
else:
CompRec["specimen_mad"]=""
CompRec["specimen_alpha95"]='%7.1f '%(mpars["specimen_alpha95"])
CompRec["specimen_n"]='%i '%(mpars["specimen_n"])
CompMeths=[]
for meth in method_codes:
if meth not in CompMeths:CompMeths.append(meth)
if calculation_type not in CompMeths:CompMeths.append(calculation_type)
if geo==1: CompMeths.append("DA-DIR-GEO")
if tilt==1: CompMeths.append("DA-DIR-TILT")
if "DE-BFP" not in calculation_type:
CompRec["specimen_direction_type"]='l'
else:
CompRec["specimen_direction_type"]='p'
CompRec["magic_method_codes"]=""
if len(CompMeths) != 0:
methstring=""
for meth in CompMeths:
methstring=methstring+ ":" +meth
CompRec["magic_method_codes"]=methstring.strip(':')
CompRec["specimen_description"]=comment
if len(inst_codes) != 0:
inststring=""
for inst in inst_codes:
inststring=inststring+ ":" +inst
CompRec["magic_instrument_codes"]=inststring.strip(':')
PmagSpecs.append(CompRec)
k+=1
pmag.magic_write(pmag_file,PmagSpecs,'pmag_specimens')
print "Recalculated specimen data stored in ",pmag_file
def main():
"""
NAME
thellier_magic.py
DESCRIPTION
plots Thellier-Thellier, allowing interactive setting of bounds
and customizing of selection criteria. Saves and reads interpretations
from a pmag_specimen formatted table, default: thellier_specimens.txt
SYNTAX
thellier_magic.py [command line options]
OPTIONS
-h prints help message and quits
-f MEAS, set magic_measurements input file
-fsp PRIOR, set pmag_specimen prior interpretations file
-fan ANIS, set rmag_anisotropy file for doing the anisotropy corrections
-fcr CRIT, set criteria file for grading.
-fmt [svg,png,jpg], format for images - default is svg
-sav, saves plots with out review (default format)
-spc SPEC, plots single specimen SPEC, saves plot with specified format
with optional -b bounds adn quits
-b BEG END: sets bounds for calculation
BEG: starting step for slope calculation
END: ending step for slope calculation
-z use only z component difference for pTRM calculation
DEFAULTS
MEAS: magic_measurements.txt
REDO: thellier_redo
CRIT: NONE
PRIOR: NONE
OUTPUT
figures:
ALL: numbers refer to temperature steps in command line window
1) Arai plot: closed circles are zero-field first/infield
open circles are infield first/zero-field
triangles are pTRM checks
squares are pTRM tail checks
VDS is vector difference sum
diamonds are bounds for interpretation
2) Zijderveld plot: closed (open) symbols are X-Y (X-Z) planes
X rotated to NRM direction
3) (De/Re)Magnetization diagram:
circles are NRM remaining
squares are pTRM gained
4) equal area projections:
green triangles are pTRM gained direction
red (purple) circles are lower(upper) hemisphere of ZI step directions
blue (cyan) squares are lower(upper) hemisphere IZ step directions
5) Optional: TRM acquisition
6) Optional: TDS normalization
command line window:
list is: temperature step numbers, temperatures (C), Dec, Inc, Int (units of magic_measuements)
list of possible commands: type letter followed by return to select option
saving of plots creates .svg format files with specimen_name, plot type as name
"""
#
# initializations
#
meas_file,critout,inspec="magic_measurements.txt","","thellier_specimens.txt"
first=1
inlt=0
version_num=pmag.get_version()
TDinit,Tinit,field,first_save=0,0,-1,1
user,comment,AniSpec,locname="",'',"",""
ans,specimen,recnum,start,end=0,0,0,0,0
plots,pmag_out,samp_file,style=0,"","","svg"
verbose=pmagplotlib.verbose
fmt='.'+style
#
# default acceptance criteria
#
accept=pmag.default_criteria(0)[0] # set the default criteria
#
# parse command line options
#
Zdiff,anis=0,0
spc,BEG,END="","",""
if '-h' in sys.argv:
print main.__doc__
sys.exit()
if '-f' in sys.argv:
ind=sys.argv.index('-f')
meas_file=sys.argv[ind+1]
if '-fsp' in sys.argv:
ind=sys.argv.index('-fsp')
inspec=sys.argv[ind+1]
if '-fan' in sys.argv:
ind=sys.argv.index('-fan')
anisfile=sys.argv[ind+1]
anis=1
anis_data,file_type=pmag.magic_read(anisfile)
if verbose: print "Anisotropy data read in from ", anisfile
if '-fmt' in sys.argv:
ind=sys.argv.index('-fmt')
fmt='.'+sys.argv[ind+1]
if '-sav' in sys.argv:
plots=1
verbose=0
if '-z' in sys.argv: Zdiff=1
if '-spc' in sys.argv:
ind=sys.argv.index('-spc')
spc=sys.argv[ind+1]
if '-b' in sys.argv:
ind=sys.argv.index('-b')
BEG=int(sys.argv[ind+1])
END=int(sys.argv[ind+2])
if '-fcr' in sys.argv:
ind=sys.argv.index('-fcr')
critout=sys.argv[ind+1]
crit_data,file_type=pmag.magic_read(critout)
if file_type!='pmag_criteria':
if verbose: print 'bad pmag_criteria file, using no acceptance criteria'
accept=pmag.default_criteria(1)[0]
else:
if verbose: print "Acceptance criteria read in from ", critout
accept={'pmag_criteria_code':'ACCEPTANCE','er_citation_names':'This study'}
for critrec in crit_data:
if 'sample_int_sigma_uT' in critrec.keys(): # accommodate Shaar's new criterion
critrec['sample_int_sigma']='%10.3e'%(eval(critrec['sample_int_sigma_uT'])*1e-6)
for key in critrec.keys():
if key not in accept.keys() and critrec[key]!='':
accept[key]=critrec[key]
try:
open(inspec,'rU')
PriorRecs,file_type=pmag.magic_read(inspec)
if file_type != 'pmag_specimens':
print file_type
print file_type,inspec," is not a valid pmag_specimens file "
sys.exit()
for rec in PriorRecs:
if 'magic_software_packages' not in rec.keys():rec['magic_software_packages']=""
except IOError:
PriorRecs=[]
if verbose:print "starting new specimen interpretation file: ",inspec
meas_data,file_type=pmag.magic_read(meas_file)
if file_type != 'magic_measurements':
print file_type
print file_type,"This is not a valid magic_measurements file "
sys.exit()
backup=0
# define figure numbers for arai, zijderveld and
# de-,re-magization diagrams
AZD={}
AZD['deremag'], AZD['zijd'],AZD['arai'],AZD['eqarea']=1,2,3,4
pmagplotlib.plot_init(AZD['arai'],5,5)
pmagplotlib.plot_init(AZD['zijd'],5,5)
pmagplotlib.plot_init(AZD['deremag'],5,5)
pmagplotlib.plot_init(AZD['eqarea'],5,5)
#
#
#
# get list of unique specimen names
#
CurrRec=[]
sids=pmag.get_specs(meas_data)
# get plots for specimen s - default is just to step through arai diagrams
#
if spc!="": specimen =sids.index(spc)
while specimen < len(sids):
methcodes=[]
if verbose:
print sids[specimen],specimen+1, 'of ', len(sids)
MeasRecs=[]
s=sids[specimen]
datablock,trmblock,tdsrecs=[],[],[]
PmagSpecRec={}
if first==0:
for key in keys:PmagSpecRec[key]="" # make sure all new records have same set of keys
PmagSpecRec["er_analyst_mail_names"]=user
PmagSpecRec["specimen_correction"]='u'
#
# find the data from the meas_data file for this specimen
#
for rec in meas_data:
if rec["er_specimen_name"]==s:
MeasRecs.append(rec)
if "magic_method_codes" not in rec.keys():
rec["magic_method_codes"]=""
methods=rec["magic_method_codes"].split(":")
meths=[]
for meth in methods:
meths.append(meth.strip()) # take off annoying spaces
methods=""
for meth in meths:
if meth.strip() not in methcodes and "LP-" in meth:methcodes.append(meth.strip())
methods=methods+meth+":"
methods=methods[:-1]
rec["magic_method_codes"]=methods
if "LP-PI-TRM" in meths: datablock.append(rec)
if "LP-TRM" in meths: trmblock.append(rec)
if "LP-TRM-TD" in meths: tdsrecs.append(rec)
if len(trmblock)>2 and inspec!="":
if Tinit==0:
Tinit=1
AZD['TRM']=5
pmagplotlib.plot_init(AZD['TRM'],5,5)
elif Tinit==1: # clear the TRM figure if not needed
pmagplotlib.clearFIG(AZD['TRM'])
if len(tdsrecs)>2:
if TDinit==0:
TDinit=1
AZD['TDS']=6
pmagplotlib.plot_init(AZD['TDS'],5,5)
elif TDinit==1: # clear the TDS figure if not needed
pmagplotlib.clearFIG(AZD['TDS'])
if len(datablock) <4:
if backup==0:
specimen+=1
if verbose:
print 'skipping specimen - moving forward ', s
else:
specimen-=1
if verbose:
print 'skipping specimen - moving backward ', s
#
# collect info for the PmagSpecRec dictionary
#
else:
rec=datablock[0]
PmagSpecRec["er_citation_names"]="This study"
PmagSpecRec["er_specimen_name"]=s
PmagSpecRec["er_sample_name"]=rec["er_sample_name"]
PmagSpecRec["er_site_name"]=rec["er_site_name"]
PmagSpecRec["er_location_name"]=rec["er_location_name"]
locname=rec['er_location_name'].replace('/','-')
if "er_expedition_name" in rec.keys():PmagSpecRec["er_expedition_name"]=rec["er_expedition_name"]
if "magic_instrument_codes" not in rec.keys():rec["magic_instrument_codes"]=""
PmagSpecRec["magic_instrument_codes"]=rec["magic_instrument_codes"]
PmagSpecRec["measurement_step_unit"]="K"
if "magic_experiment_name" not in rec.keys():
rec["magic_experiment_name"]=""
else:
PmagSpecRec["magic_experiment_names"]=rec["magic_experiment_name"]
meths=rec["magic_method_codes"].split()
# sort data into types
araiblock,field=pmag.sortarai(datablock,s,Zdiff)
first_Z=araiblock[0]
GammaChecks=araiblock[5]
if len(first_Z)<3:
if backup==0:
specimen+=1
if verbose:
print 'skipping specimen - moving forward ', s
else:
specimen-=1
if verbose:
print 'skipping specimen - moving backward ', s
else:
backup=0
zijdblock,units=pmag.find_dmag_rec(s,meas_data)
recnum=0
if verbose:
print "index step Dec Inc Int Gamma"
for plotrec in zijdblock:
if GammaChecks!="":
gamma=""
for g in GammaChecks:
if g[0]==plotrec[0]-273:
gamma=g[1]
break
if gamma!="":
print '%i %i %7.1f %7.1f %8.3e %7.1f' % (recnum,plotrec[0]-273,plotrec[1],plotrec[2],plotrec[3],gamma)
else:
print '%i %i %7.1f %7.1f %8.3e ' % (recnum,plotrec[0]-273,plotrec[1],plotrec[2],plotrec[3])
recnum += 1
pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
if verbose:pmagplotlib.drawFIGS(AZD)
if len(tdsrecs)>2: # a TDS experiment
tdsblock=[] # make a list for the TDS data
Mkeys=['measurement_magnitude','measurement_magn_moment','measurement_magn_volume','measuruement_magn_mass']
mkey,k="",0
while mkey=="" and k<len(Mkeys)-1: # find which type of intensity
key= Mkeys[k]
if key in tdsrecs[0].keys() and tdsrecs[0][key]!="": mkey=key
k+=1
if mkey=="":break # get outta here
Tnorm=""
for tdrec in tdsrecs:
meths=tdrec['magic_method_codes'].split(":")
for meth in meths: meth.replace(" ","") # strip off potential nasty spaces
if 'LT-T-I' in meths and Tnorm=="": # found first total TRM
Tnorm=float(tdrec[mkey]) # normalize by total TRM
tdsblock.append([273,zijdblock[0][3]/Tnorm,1.]) # put in the zero step
if 'LT-T-Z' in meths and Tnorm!="": # found a LP-TRM-TD demag step, now need complementary LT-T-Z from zijdblock
step=float(tdrec['treatment_temp'])
Tint=""
if mkey!="":
Tint=float(tdrec[mkey])
if Tint!="":
for zrec in zijdblock:
if zrec[0]==step: # found matching
tdsblock.append([step,zrec[3]/Tnorm,Tint/Tnorm])
break
if len(tdsblock)>2:
pmagplotlib.plotTDS(AZD['TDS'],tdsblock,s+':LP-PI-TDS:')
if verbose:pmagplotlib(drawFIGS(AZD))
else:
print "Something wrong here"
if anis==1: # look up anisotropy data for this specimen
AniSpec=""
for aspec in anis_data:
if aspec["er_specimen_name"]==PmagSpecRec["er_specimen_name"]:
AniSpec=aspec
if verbose: print 'Found anisotropy record...'
break
if inspec !="":
if verbose: print 'Looking up saved interpretation....'
found = 0
for k in range(len(PriorRecs)):
try:
if PriorRecs[k]["er_specimen_name"]==s:
found =1
CurrRec.append(PriorRecs[k])
for j in range(len(zijdblock)):
if float(zijdblock[j][0])==float(PriorRecs[k]["measurement_step_min"]):start=j
if float(zijdblock[j][0])==float(PriorRecs[k]["measurement_step_max"]):end=j
pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,start,end,accept)
pars['measurement_step_unit']="K"
pars['experiment_type']='LP-PI-TRM'
del PriorRecs[k] # put in CurrRec, take out of PriorRecs
if errcode!=1:
pars["specimen_lab_field_dc"]=field
pars["specimen_int"]=-1*field*pars["specimen_b"]
pars["er_specimen_name"]=s
if verbose:
print 'Saved interpretation: '
pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',verbose)
pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
if verbose:pmagplotlib.drawFIGS(AZD)
if len(trmblock)>2:
blab=field
best=pars["specimen_int"]
Bs,TRMs=[],[]
for trec in trmblock:
Bs.append(float(trec['treatment_dc_field']))
TRMs.append(float(trec['measurement_magn_moment']))
NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
Mp,Bp=[],[]
for k in range(int(max(Bs)*1e6)):
Bp.append(float(k)*1e-6)
npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
Mp.append(npred)
pmagplotlib.plotTRM(AZD['TRM'],Bs,TRMs,Bp,Mp,NLpars,trec['magic_experiment_name'])
PmagSpecRec['specimen_int']=NLpars['banc']
if verbose:
print 'Banc= ',float(NLpars['banc'])*1e6
pmagplotlib.drawFIGS(AZD)
mpars=pmag.domean(araiblock[1],start,end,'DE-BFL')
if verbose:
print 'pTRM direction= ','%7.1f'%(mpars['specimen_dec']),' %7.1f'%(mpars['specimen_inc']),' MAD:','%7.1f'%(mpars['specimen_mad'])
if AniSpec!="":
CpTRM=pmag.Dir_anis_corr([mpars['specimen_dec'],mpars['specimen_inc']],AniSpec)
AniSpecRec=pmag.doaniscorr(PmagSpecRec,AniSpec)
if verbose:
print 'Anisotropy corrected TRM direction= ','%7.1f'%(CpTRM[0]),' %7.1f'%(CpTRM[1])
print 'Anisotropy corrected intensity= ',float(AniSpecRec['specimen_int'])*1e6
else:
print 'error on specimen ',s
except:
pass
if verbose and found==0: print ' None found :( '
if spc!="":
if BEG!="":
pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,BEG,END,accept)
pars['measurement_step_unit']="K"
pars["specimen_lab_field_dc"]=field
pars["specimen_int"]=-1*field*pars["specimen_b"]
pars["er_specimen_name"]=s
pars['specimen_grade']='' # ungraded
pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
if verbose:pmagplotlib.drawFIGS(AZD)
if len(trmblock)>2:
if inlt==0:
inlt=1
blab=field
best=pars["specimen_int"]
Bs,TRMs=[],[]
for trec in trmblock:
Bs.append(float(trec['treatment_dc_field']))
TRMs.append(float(trec['measurement_magn_moment']))
NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
#
Mp,Bp=[],[]
for k in range(int(max(Bs)*1e6)):
Bp.append(float(k)*1e-6)
npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
files={}
for key in AZD.keys():
files[key]=s+'_'+key+fmt
pmagplotlib.saveP(AZD,files)
sys.exit()
if verbose:
ans='b'
while ans != "":
print """
s[a]ve plot, set [b]ounds for calculation, [d]elete current interpretation, [p]revious, [s]ample, [q]uit:
"""
ans=raw_input('Return for next specimen \n')
if ans=="":
specimen +=1
if ans=="d":
save_redo(PriorRecs,inspec)
CurrRec=[]
pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
if verbose:pmagplotlib.drawFIGS(AZD)
if ans=='a':
files={}
for key in AZD.keys():
files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_s_TY:_'+key+fmt
pmagplotlib.saveP(AZD,files)
ans=""
if ans=='q':
print "Good bye"
sys.exit()
if ans=='p':
specimen =specimen -1
backup = 1
ans=""
if ans=='s':
keepon=1
spec=raw_input('Enter desired specimen name (or first part there of): ')
while keepon==1:
try:
specimen =sids.index(spec)
keepon=0
except:
tmplist=[]
for qq in range(len(sids)):
if spec in sids[qq]:tmplist.append(sids[qq])
print specimen," not found, but this was: "
print tmplist
spec=raw_input('Select one or try again\n ')
ans=""
if ans=='b':
if end==0 or end >=len(zijdblock):end=len(zijdblock)-1
GoOn=0
while GoOn==0:
answer=raw_input('Enter index of first point for calculation: ['+str(start)+'] ')
try:
start=int(answer)
answer=raw_input('Enter index of last point for calculation: ['+str(end)+'] ')
end=int(answer)
if start >=0 and start <len(zijdblock)-2 and end >0 and end <len(zijdblock) or start>=end:
GoOn=1
else:
print "Bad endpoints - try again! "
start,end=0,len(zijdblock)
except ValueError:
print "Bad endpoints - try again! "
start,end=0,len(zijdblock)
s=sids[specimen]
pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,start,end,accept)
pars['measurement_step_unit']="K"
pars["specimen_lab_field_dc"]=field
pars["specimen_int"]=-1*field*pars["specimen_b"]
pars["er_specimen_name"]=s
pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',0)
PmagSpecRec['specimen_scat']=pars['specimen_scat']
PmagSpecRec['specimen_frac']='%5.3f'%(pars['specimen_frac'])
PmagSpecRec['specimen_gmax']='%5.3f'%(pars['specimen_gmax'])
PmagSpecRec["measurement_step_min"]='%8.3e' % (pars["measurement_step_min"])
PmagSpecRec["measurement_step_max"]='%8.3e' % (pars["measurement_step_max"])
PmagSpecRec["measurement_step_unit"]="K"
PmagSpecRec["specimen_int_n"]='%i'%(pars["specimen_int_n"])
PmagSpecRec["specimen_lab_field_dc"]='%8.3e'%(pars["specimen_lab_field_dc"])
PmagSpecRec["specimen_int"]='%9.4e '%(pars["specimen_int"])
PmagSpecRec["specimen_b"]='%5.3f '%(pars["specimen_b"])
PmagSpecRec["specimen_q"]='%5.1f '%(pars["specimen_q"])
PmagSpecRec["specimen_f"]='%5.3f '%(pars["specimen_f"])
PmagSpecRec["specimen_fvds"]='%5.3f'%(pars["specimen_fvds"])
PmagSpecRec["specimen_b_beta"]='%5.3f'%(pars["specimen_b_beta"])
PmagSpecRec["specimen_int_mad"]='%7.1f'%(pars["specimen_int_mad"])
PmagSpecRec["specimen_Z"]='%7.1f'%(pars["specimen_Z"])
PmagSpecRec["specimen_gamma"]='%7.1f'%(pars["specimen_gamma"])
PmagSpecRec["specimen_grade"]=pars["specimen_grade"]
if pars["method_codes"]!="":
tmpcodes=pars["method_codes"].split(":")
for t in tmpcodes:
if t.strip() not in methcodes:methcodes.append(t.strip())
PmagSpecRec["specimen_dec"]='%7.1f'%(pars["specimen_dec"])
PmagSpecRec["specimen_inc"]='%7.1f'%(pars["specimen_inc"])
PmagSpecRec["specimen_tilt_correction"]='-1'
PmagSpecRec["specimen_direction_type"]='l'
PmagSpecRec["direction_type"]='l' # this is redundant, but helpful - won't be imported
PmagSpecRec["specimen_int_dang"]='%7.1f '%(pars["specimen_int_dang"])
PmagSpecRec["specimen_drats"]='%7.1f '%(pars["specimen_drats"])
PmagSpecRec["specimen_drat"]='%7.1f '%(pars["specimen_drat"])
PmagSpecRec["specimen_int_ptrm_n"]='%i '%(pars["specimen_int_ptrm_n"])
PmagSpecRec["specimen_rsc"]='%6.4f '%(pars["specimen_rsc"])
PmagSpecRec["specimen_md"]='%i '%(int(pars["specimen_md"]))
if PmagSpecRec["specimen_md"]=='-1':PmagSpecRec["specimen_md"]=""
PmagSpecRec["specimen_b_sigma"]='%5.3f '%(pars["specimen_b_sigma"])
if "IE-TT" not in methcodes:methcodes.append("IE-TT")
methods=""
for meth in methcodes:
methods=methods+meth+":"
PmagSpecRec["magic_method_codes"]=methods[:-1]
PmagSpecRec["specimen_description"]=comment
PmagSpecRec["magic_software_packages"]=version_num
pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
if verbose:pmagplotlib.drawFIGS(AZD)
if len(trmblock)>2:
blab=field
best=pars["specimen_int"]
Bs,TRMs=[],[]
for trec in trmblock:
Bs.append(float(trec['treatment_dc_field']))
TRMs.append(float(trec['measurement_magn_moment']))
NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
Mp,Bp=[],[]
for k in range(int(max(Bs)*1e6)):
Bp.append(float(k)*1e-6)
npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
Mp.append(npred)
pmagplotlib.plotTRM(AZD['TRM'],Bs,TRMs,Bp,Mp,NLpars,trec['magic_experiment_name'])
if verbose:
print 'Non-linear TRM corrected intensity= ',float(NLpars['banc'])*1e6
if verbose:pmagplotlib.drawFIGS(AZD)
pars["specimen_lab_field_dc"]=field
pars["specimen_int"]=-1*field*pars["specimen_b"]
pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',verbose)
saveit=raw_input("Save this interpretation? [y]/n \n")
if saveit!='n':
PriorRecs.append(PmagSpecRec) # put back an interpretation
specimen+=1
save_redo(PriorRecs,inspec)
ans=""
elif plots==1:
specimen+=1
if fmt != ".pmag":
files={}
for key in AZD.keys():
files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_s_TY:_'+key+'_'+fmt
if pmagplotlib.isServer:
black = '#000000'
purple = '#800080'
titles={}
titles['deremag']='DeReMag Plot'
titles['zijd']='Zijderveld Plot'
titles['arai']='Arai Plot'
AZD = pmagplotlib.addBorders(AZD,titles,black,purple)
pmagplotlib.saveP(AZD,files)
# pmagplotlib.combineFigs(s,files,3)
else: # save in pmag format
script="grep "+s+" output.mag | thellier -mfsi"
script=script+' %8.4e'%(field)
min='%i'%((pars["measurement_step_min"]-273))
Max='%i'%((pars["measurement_step_max"]-273))
script=script+" "+min+" "+Max
script=script+" |plotxy;cat mypost >>thellier.ps\n"
pltf.write(script)
pmag.domagicmag(outf,MeasRecs)
if len(CurrRec)>0:
for rec in CurrRec:
PriorRecs.append(rec)
CurrRec=[]
if plots!=1 and verbose:
ans=raw_input(" Save last plot? 1/[0] ")
if ans=="1":
if fmt != ".pmag":
files={}
for key in AZD.keys():
files[key]=s+'_'+key+fmt
pmagplotlib.saveP(AZD,files)
else:
print "\n Good bye\n"
sys.exit()
if len(CurrRec)>0:PriorRecs.append(CurrRec) # put back an interpretation
if len(PriorRecs)>0:
save_redo(PriorRecs,inspec)
print 'Updated interpretations saved in ',inspec
if verbose:
print "Good bye"
def main():
"""
NAME
pca.py
DESCRIPTION
calculates best-fit line/plane through demagnetization data
INPUT FORMAT
takes specimen_name treatment intensity declination inclination in space delimited file
SYNTAX
pca.py [command line options][< filename]
OPTIONS
-h prints help and quits
-f FILE
-dir [L,P,F][BEG][END] specify direction type, beginning and end
(L:line, P:plane or F:fisher mean of unit vectors)
BEG: first step (NRM = step zero)
END: last step (NRM = step zero)
< filename for reading from standard input
OUTPUT:
specimen_name calculation_type N beg end MAD dec inc
if calculation_type is 'p', dec and inc are pole to plane, otherwise, best-fit direction
EXAMPLE:
pca.py -dir L 1 5 <ex3.3
will calculate best-fit line through demagnetization steps 1 and 5 from file ex5.1
"""
if '-h' in sys.argv: # check if help is needed
print main.__doc__
sys.exit() # graceful quit
if '-f' in sys.argv:
ind=sys.argv.index('-f')
file=sys.argv[ind+1]
f=open(file,'rU')
data=f.readlines()
else:
data=sys.stdin.readlines() # read in data from standard input
if '-dir' in sys.argv: #
ind=sys.argv.index('-dir')
typ=sys.argv[ind+1]
if typ=='L': calculation_type='DE-BFL'
if typ=='P': calculation_type='DE-BFP'
if typ=='F': calculation_type='DE-FM'
beg_pca = int(sys.argv[ind+2])
end_pca = int(sys.argv[ind+3])
#
#
datablock= [] # set up list for data
s=""
ind=0
for line in data: # read in the data from standard input
rec=line.split() # split each line on space to get records
if s=="":
s=rec[0]
print s, calculation_type
print ind,rec[1],rec[3],rec[4],rec[2]
ind+=1
datablock.append([float(rec[1]),float(rec[3]),float(rec[4]),float(rec[2]),'0']) # treatment,dec,inc,int,dummy
mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
if calculation_type=="DE-FM":
print '%s %s %i %6.2f %6.2f %6.1f %7.1f %7.1f' % (s,calculation_type,mpars["specimen_n"],mpars["measurement_step_min"],mpars["measurement_step_max"],mpars["specimen_a95"],mpars["specimen_dec"],mpars["specimen_inc"])
else:
print '%s %s %i %6.2f %6.2f %6.1f %7.1f %7.1f' % (s,calculation_type,mpars["specimen_n"],mpars["measurement_step_min"],mpars["measurement_step_max"],mpars["specimen_mad"],mpars["specimen_dec"],mpars["specimen_inc"])
def main():
"""
NAME
zeq.py
DESCRIPTION
plots demagnetization data. The equal area projection has the X direction (usually North in geographic coordinates)
to the top. The red line is the X axis of the Zijderveld diagram. Solid symbols are lower hemisphere.
The solid (open) symbols in the Zijderveld diagram are X,Y (X,Z) pairs. The demagnetization diagram plots the
fractional remanence remaining after each step. The green line is the fraction of the total remaence removed
between each step.
INPUT FORMAT
takes specimen_name treatment intensity declination inclination in space
delimited file
SYNTAX
zeq.py [command line options
OPTIONS
-f FILE for reading from command line
-u [mT,C] specify units of mT OR C, default is unscaled
"""
if '-h' in sys.argv: # check if help is needed
print main.__doc__
sys.exit() # graceful quit
else:
if '-f' in sys.argv:
ind=sys.argv.index('-f')
file=sys.argv[ind+1]
else:
print main.__doc__
sys.exit()
if '-u' in sys.argv:
ind=sys.argv.index('-u')
units=sys.argv[ind+1]
if units=="C":SIunits="K"
if units=="mT":SIunits="T"
else:
units="U"
SIunits="U"
f=open(file,'rU')
data=f.readlines()
#
datablock= [] # set up list for data
fmt='svg' # default image format
s="" # initialize specimen name
angle=0.
for line in data: # read in the data from standard input
rec=line.split() # split each line on space to get records
if angle=="":angle=float(rec[3])
if s=="":s=rec[0]
if units=='mT':datablock.append([float(rec[1])*1e-3,float(rec[3]),float(rec[4]),1e-3*float(rec[2]),'','g']) # treatment, dec, inc, int # convert to T and Am^2 (assume emu)
if units=='C':datablock.append([float(rec[1])+273.,float(rec[3]),float(rec[4]),1e-3*float(rec[2]),'','g']) # treatment, dec, inc, int, convert to K and Am^2, assume emu
if units=='U':datablock.append([float(rec[1]),float(rec[3]),float(rec[4]),float(rec[2]),'','g']) # treatment, dec, inc, int, using unscaled units
# define figure numbers in a dictionary for equal area, zijderveld,
# and intensity vs. demagnetiztion step respectively
ZED={}
ZED['eqarea'],ZED['zijd'], ZED['demag']=1,2,3
pmagplotlib.plot_init(ZED['eqarea'],5,5) # initialize plots
pmagplotlib.plot_init(ZED['zijd'],5,5)
pmagplotlib.plot_init(ZED['demag'],5,5)
#
#
pmagplotlib.plotZED(ZED,datablock,angle,s,SIunits) # plot the data
pmagplotlib.drawFIGS(ZED)
while 1:
#
# print out data for this sample to screen
#
recnum=0
for plotrec in datablock:
if units=='mT':print '%i %7.1f %8.3e %7.1f %7.1f ' % (recnum,plotrec[0]*1e3,plotrec[3],plotrec[1],plotrec[2])
if units=='C':print '%i %7.1f %8.3e %7.1f %7.1f ' % (recnum,plotrec[0]-273.,plotrec[3],plotrec[1],plotrec[2])
if units=='U':print '%i %7.1f %8.3e %7.1f %7.1f ' % (recnum,plotrec[0],plotrec[3],plotrec[1],plotrec[2])
recnum += 1
end_pca=len(datablock)-1 # initialize end_pca, beg_pca to first and last measurement
beg_pca=0
ans=raw_input(" s[a]ve plot, [b]ounds for pca and calculate, change [h]orizontal projection angle, [q]uit: ")
if ans =='q':
sys.exit()
if ans=='a':
files={}
for key in ZED.keys():
files[key]=s+'_'+key+'.'+fmt
pmagplotlib.saveP(ZED,files)
if ans=='h':
angle=float(raw_input(" Declination to project onto horizontal axis? "))
pmagplotlib.plotZED(ZED,datablock,angle,s,SIunits) # plot the data
if ans=='b':
GoOn=0
while GoOn==0: # keep going until reasonable bounds are set
print 'Enter index of first point for pca: ','[',beg_pca,']'
answer=raw_input('return to keep default ')
if answer != "":beg_pca=int(answer)
print 'Enter index of last point for pca: ','[',end_pca,']'
answer=raw_input('return to keep default ')
if answer != "":
end_pca=int(answer)
if beg_pca >=0 and beg_pca<=len(datablock)-2 and end_pca>0 and end_pca<len(datablock):
GoOn=1
else:
print "Bad entry of indices - try again"
end_pca=len(datablock)-1
beg_pca=0
GoOn=0
while GoOn==0:
ct=raw_input('Enter Calculation Type: best-fit line, plane or fisher mean [l]/p/f : ' )
if ct=="" or ct=="l":
calculation_type="DE-BFL"
GoOn=1 # all good
elif ct=='p':
calculation_type="DE-BFP"
GoOn=1 # all good
elif ct=='f':
calculation_type="DE-FM"
GoOn=1 # all good
else:
print "bad entry of calculation type: try again. " # keep going
pmagplotlib.plotZED(ZED,datablock,angle,s,SIunits) # plot the data
mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type) # get best-fit direction/great circle
pmagplotlib.plotDir(ZED,mpars,datablock,angle) # plot the best-fit direction/great circle
print 'Specimen, calc_type, N, min, max, MAD, dec, inc'
if units=='mT':print '%s %s %i %6.2f %6.2f %6.1f %7.1f %7.1f' % (s,calculation_type,mpars["specimen_n"],mpars["measurement_step_min"]*1e3,mpars["measurement_step_max"]*1e3,mpars["specimen_mad"],mpars["specimen_dec"],mpars["specimen_inc"])
if units=='C':print '%s %s %i %6.2f %6.2f %6.1f %7.1f %7.1f' % (s,calculation_type,mpars["specimen_n"],mpars["measurement_step_min"]-273,mpars["measurement_step_max"]-273,mpars["specimen_mad"],mpars["specimen_dec"],mpars["specimen_inc"])
if units=='U':print '%s %s %i %6.2f %6.2f %6.1f %7.1f %7.1f' % (s,calculation_type,mpars["specimen_n"],mpars["measurement_step_min"],mpars["measurement_step_max"],mpars["specimen_mad"],mpars["specimen_dec"],mpars["specimen_inc"])
def main():
"""
NAME
zeq_magic.py
DESCRIPTION
reads in magic_measurements formatted file, makes plots of remanence decay
during demagnetization experiments. Reads in prior interpretations saved in
a pmag_specimens formatted file and allows re-interpretations of best-fit lines
and planes and saves (revised or new) interpretations in a pmag_specimens file.
interpretations are saved in the coordinate system used. Also allows judicious editting of
measurements to eliminate "bad" measurements. These are marked as such in the magic_measurements
input file. they are NOT deleted, just ignored.
SYNTAX
zeq_magic.py [command line options]
OPTIONS
-h prints help message and quits
-f MEASFILE: sets magic_measurements format input file, default: magic_measurements.txt
-fsp SPECFILE: sets pmag_specimens format file with prior interpreations, default: zeq_specimens.txt
-Fp PLTFILE: sets filename for saved plot, default is name_type.fmt (where type is zijd, eqarea or decay curve)
-crd [s,g,t]: sets coordinate system, g=geographic, t=tilt adjusted, default: specimen coordinate system
-fsa SAMPFILE: sets er_samples format file with orientation information, default: er_samples.txt
-spc SPEC plots single specimen SPEC, saves plot with specified format
with optional -dir settings and quits
-dir [L,P,F][beg][end]: sets calculation type for principal component analysis, default is none
beg: starting step for PCA calculation
end: ending step for PCA calculation
[L,P,F]: calculation type for line, plane or fisher mean
must be used with -spc option
-fmt FMT: set format of saved plot [png,svg,jpg]
-A: suppresses averaging of replicate measurements, default is to average
-sav: saves all plots without review
SCREEN OUTPUT:
Specimen, N, a95, StepMin, StepMax, Dec, Inc, calculation type
"""
# initialize some variables
doave,e,b=1,0,0 # average replicates, initial end and beginning step
plots,coord=0,'s'
noorient=0
version_num=pmag.get_version()
verbose=pmagplotlib.verbose
beg_pca,end_pca,direction_type="","",'l'
calculation_type,fmt="","svg"
user,spec_keys,locname="",[],''
plot_file=""
sfile=""
plot_file=""
PriorRecs=[] # empty list for prior interpretations
backup=0
specimen="" # can skip everything and just plot one specimen with bounds e,b
if '-h' in sys.argv:
print main.__doc__
sys.exit()
if '-WD' in sys.argv:
ind=sys.argv.index('-WD')
dir_path=sys.argv[ind+1]
else:
dir_path='.'
inspec=dir_path+'/'+'zeq_specimens.txt'
meas_file,geo,tilt,ask,samp_file=dir_path+'/magic_measurements.txt',0,0,0,dir_path+'/er_samples.txt'
if '-f' in sys.argv:
ind=sys.argv.index('-f')
meas_file=dir_path+'/'+sys.argv[ind+1]
if '-fsp' in sys.argv:
ind=sys.argv.index('-fsp')
inspec=dir_path+'/'+sys.argv[ind+1]
if '-fsa' in sys.argv:
ind=sys.argv.index('-fsa')
samp_file=dir_path+'/'+sys.argv[ind+1]
sfile='ok'
if '-crd' in sys.argv:
ind=sys.argv.index('-crd')
coord=sys.argv[ind+1]
if coord=='g' or coord=='t':
samp_data,file_type=pmag.magic_read(samp_file)
if file_type=='er_samples':sfile='ok'
geo=1
if coord=='t':tilt=1
if '-spc' in sys.argv:
ind=sys.argv.index('-spc')
specimen=sys.argv[ind+1]
if '-dir' in sys.argv:
ind=sys.argv.index('-dir')
direction_type=sys.argv[ind+1]
beg_pca=int(sys.argv[ind+2])
end_pca=int(sys.argv[ind+3])
if direction_type=='L':calculation_type='DE-BFL'
if direction_type=='P':calculation_type='DE-BFP'
if direction_type=='F':calculation_type='DE-FM'
if '-Fp' in sys.argv:
ind=sys.argv.index('-Fp')
plot_file=dir_path+'/'+sys.argv[ind+1]
if '-A' in sys.argv: doave=0
if '-sav' in sys.argv:
plots=1
verbose=0
if '-fmt' in sys.argv:
ind=sys.argv.index('-fmt')
fmt=sys.argv[ind+1]
#
first_save=1
meas_data,file_type=pmag.magic_read(meas_file)
changeM,changeS=0,0 # check if data or interpretations have changed
if file_type != 'magic_measurements':
print file_type
print file_type,"This is not a valid magic_measurements file "
sys.exit()
for rec in meas_data:
if "magic_method_codes" not in rec.keys(): rec["magic_method_codes"]=""
methods=""
tmp=rec["magic_method_codes"].replace(" ","").split(":")
for meth in tmp:
methods=methods+meth+":"
rec["magic_method_codes"]=methods[:-1] # get rid of annoying spaces in Anthony's export files
if "magic_instrument_codes" not in rec.keys() :rec["magic_instrument_codes"]=""
PriorSpecs=[]
PriorRecs,file_type=pmag.magic_read(inspec)
if len(PriorRecs)==0:
if verbose:print "starting new file ",inspec
for Rec in PriorRecs:
if 'magic_software_packages' not in Rec.keys():Rec['magic_software_packages']=""
if Rec['er_specimen_name'] not in PriorSpecs:
if 'specimen_comp_name' not in Rec.keys():Rec['specimen_comp_name']="A"
PriorSpecs.append(Rec['er_specimen_name'])
else:
if 'specimen_comp_name' not in Rec.keys():Rec['specimen_comp_name']="A"
if "magic_method_codes" in Rec.keys():
methods=[]
tmp=Rec["magic_method_codes"].replace(" ","").split(":")
for meth in tmp:
methods.append(meth)
if 'DE-FM' in methods:
Rec['calculation_type']='DE-FM' # this won't be imported but helps
if 'DE-BFL' in methods:
Rec['calculation_type']='DE-BFL'
if 'DE-BFL-A' in methods:
Rec['calculation_type']='DE-BFL-A'
if 'DE-BFL-O' in methods:
Rec['calculation_type']='DE-BFL-O'
if 'DE-BFP' in methods:
Rec['calculation_type']='DE-BFP'
else:
Rec['calculation_type']='DE-BFL' # default is to assume a best-fit line
#
# get list of unique specimen names
#
sids=pmag.get_specs(meas_data)
#
# set up plots, angle sets X axis to horizontal, direction_type 'l' is best-fit line
# direction_type='p' is great circle
#
#
# draw plots for sample s - default is just to step through zijderveld diagrams
#
#
# define figure numbers for equal area, zijderveld,
# and intensity vs. demagnetiztion step respectively
ZED={}
ZED['eqarea'],ZED['zijd'], ZED['demag']=1,2,3
pmagplotlib.plot_init(ZED['eqarea'],5,5)
pmagplotlib.plot_init(ZED['zijd'],6,5)
pmagplotlib.plot_init(ZED['demag'],5,5)
save_pca=0
if specimen=="":
k = 0
else:
k=sids.index(specimen)
angle,direction_type="",""
setangle=0
CurrRecs=[]
while k < len(sids):
CurrRecs=[]
if setangle==0:angle=""
method_codes,inst_code=[],""
s=sids[k]
PmagSpecRec={}
PmagSpecRec["er_analyst_mail_names"]=user
PmagSpecRec['magic_software_packages']=version_num
PmagSpecRec['specimen_description']=""
PmagSpecRec['magic_method_codes']=""
if verbose and s!="":print s, k , 'out of ',len(sids)
#
# collect info for the PmagSpecRec dictionary
#
s_meas=pmag.get_dictitem(meas_data,'er_specimen_name',s,'T') # fish out this specimen
s_meas=pmag.get_dictitem(s_meas,'magic_method_codes','Z','has') # fish out zero field steps
if len(s_meas)>0:
for rec in s_meas: # fix up a few things for the output record
PmagSpecRec["magic_instrument_codes"]=rec["magic_instrument_codes"] # copy over instruments
PmagSpecRec["er_citation_names"]="This study"
PmagSpecRec["er_specimen_name"]=s
PmagSpecRec["er_sample_name"]=rec["er_sample_name"]
PmagSpecRec["er_site_name"]=rec["er_site_name"]
PmagSpecRec["er_location_name"]=rec["er_location_name"]
locname=rec['er_location_name']
if 'er_expedition_name' in rec.keys(): PmagSpecRec["er_expedition_name"]=rec["er_expedition_name"]
PmagSpecRec["magic_method_codes"]=rec["magic_method_codes"]
if "magic_experiment_name" not in rec.keys():
PmagSpecRec["magic_experiment_names"]=""
else:
PmagSpecRec["magic_experiment_names"]=rec["magic_experiment_name"]
break
#
# find the data from the meas_data file for this specimen
#
data,units=pmag.find_dmag_rec(s,meas_data)
PmagSpecRec["measurement_step_unit"]= units
u=units.split(":")
if "T" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-AF"
if "K" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-T"
if "J" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-M"
#
# find prior interpretation
#
if len(CurrRecs)==0: # check if already in
beg_pca,end_pca="",""
calculation_type=""
if inspec !="":
if verbose: print " looking up previous interpretations..."
precs=pmag.get_dictitem(PriorRecs,'er_specimen_name',s,'T') # get all the prior recs with this specimen name
precs=pmag.get_dictitem(precs,'magic_method_codes','LP-DIR','has') # get the directional data
PriorRecs=pmag.get_dictitem(PriorRecs,'er_specimen_name',s,'F') # take them all out of prior recs
# get the ones that meet the current coordinate system
for prec in precs:
if 'specimen_tilt_correction' not in prec.keys() or prec['specimen_tilt_correction']=='-1':
crd='s'
elif prec['specimen_tilt_correction']=='0':
crd='g'
elif prec['specimen_tilt_correction']=='100':
crd='t'
else:
crd='?'
CurrRec={}
for key in prec.keys():CurrRec[key]=prec[key]
CurrRecs.append(CurrRec) # put in CurrRecs
method_codes= CurrRec["magic_method_codes"].replace(" ","").split(':')
calculation_type='DE-BFL'
if 'DE-FM' in method_codes: calculation_type='DE-FM'
if 'DE-BFP' in method_codes: calculation_type='DE-BFP'
if 'DE-BFL-A' in method_codes: calculation_type='DE-BFL-A'
if 'specimen_dang' not in CurrRec.keys():
if verbose:print 'Run mk_redo.py and zeq_magic_redo.py to get the specimen_dang values'
CurrRec['specimen_dang']=-1
if calculation_type!='DE-FM' and crd==coord: # not a fisher mean
if verbose:print "Specimen N MAD DANG start end dec inc type component coordinates"
if units=='K':
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["specimen_dang"]),float(CurrRec["measurement_step_min"])-273,float(CurrRec["measurement_step_max"])-273,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
elif units=='T':
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["specimen_dang"]),float(CurrRec["measurement_step_min"])*1e3,float(CurrRec["measurement_step_max"])*1e3,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
elif 'T' in units and 'K' in units:
if float(CurrRec['measurement_step_min'])<1.0 :
min=float(CurrRec['measurement_step_min'])*1e3
else:
min=float(CurrRec['measurement_step_min'])-273
if float(CurrRec['measurement_step_max'])<1.0 :
max=float(CurrRec['measurement_step_max'])*1e3
else:
max=float(CurrRec['measurement_step_max'])-273
if verbose:print '%s %i %7.1f %i %i %7.1f %7.1f %7.1f, %s %s\n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec['specimen_dang']),min,max,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,crd)
elif 'J' in units:
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec['specimen_dang']),float(CurrRec["measurement_step_min"]),float(CurrRec["measurement_step_max"]),float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
elif calculation_type=='DE-FM' and crd==coord: # fisher mean
if verbose:print "Specimen a95 DANG start end dec inc type component coordinates"
if units=='K':
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),float(CurrRec["measurement_step_min"])-273,float(CurrRec["measurement_step_max"])-273,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
elif units=='T':
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),float(CurrRec["measurement_step_min"])*1e3,float(CurrRec["measurement_step_max"])*1e3,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
elif 'T' in units and 'K' in units:
if float(CurrRec['measurement_step_min'])<1.0 :
min=float(CurrRec['measurement_step_min'])*1e3
else:
min=float(CurrRec['measurement_step_min'])-273
if float(CurrRec['measurement_step_max'])<1.0 :
max=float(CurrRec['measurement_step_max'])*1e3
else:
max=float(CurrRec['measurement_step_max'])-273
if verbose:print '%s %i %7.1f %i %i %7.1f %7.1f %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),min,max,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,crd)
elif 'J' in units:
if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %s %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["measurement_step_min"]),float(CurrRec["measurement_step_max"]),float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
if len(CurrRecs)==0:beg_pca,end_pca="",""
datablock=data
noskip=1
if len(datablock) <3:
noskip=0
if backup==0:
k+=1
else:
k-=1
if len(CurrRecs)>0:
for rec in CurrRecs:
PriorRecs.append(rec)
CurrRecs=[]
else:
backup=0
if noskip:
#
# find replicate measurements at given treatment step and average them
#
# step_meth,avedata=pmag.vspec(data)
# if len(avedata) != len(datablock):
# if doave==1:
# method_codes.append("DE-VM")
# datablock=avedata
# #
# do geo or stratigraphic correction now
#
if geo==1:
#
# find top priority orientation method
orient,az_type=pmag.get_orient(samp_data,PmagSpecRec["er_sample_name"])
if az_type=='SO-NO':
if verbose: print "no orientation data for ",s
orient["sample_azimuth"]=0
orient["sample_dip"]=0
noorient=1
method_codes.append("SO-NO")
orient["sample_azimuth"]=0
orient["sample_dip"]=0
orient["sample_bed_dip_azimuth"]=0
orient["sample_bed_dip"]=0
noorient=1
method_codes.append("SO-NO")
else:
noorient=0
#
# if stratigraphic selected, get stratigraphic correction
#
tiltblock,geoblock=[],[]
for rec in datablock:
d_geo,i_geo=pmag.dogeo(rec[1],rec[2],float(orient["sample_azimuth"]),float(orient["sample_dip"]))
geoblock.append([rec[0],d_geo,i_geo,rec[3],rec[4],rec[5],rec[6]])
if tilt==1 and "sample_bed_dip" in orient.keys() and float(orient['sample_bed_dip'])!=0:
d_tilt,i_tilt=pmag.dotilt(d_geo,i_geo,float(orient["sample_bed_dip_direction"]),float(orient["sample_bed_dip"]))
tiltblock.append([rec[0],d_tilt,i_tilt,rec[3],rec[4],rec[5],rec[6]])
if tilt==1: plotblock=tiltblock
if geo==1 and tilt==0:plotblock=geoblock
if geo==0 and tilt==0: plotblock=datablock
#
# set the end pca point to last point if not set
if e==0 or e>len(plotblock)-1: e=len(plotblock)-1
if angle=="": angle=plotblock[0][1] # rotate to NRM declination
title=s+'_s'
if geo==1 and tilt==0 and noorient!=1:title=s+'_g'
if tilt==1 and noorient!=1:title=s+'_t'
pmagplotlib.plotZED(ZED,plotblock,angle,title,units)
if verbose:pmagplotlib.drawFIGS(ZED)
if len(CurrRecs)!=0:
for prec in CurrRecs:
if 'calculation_type' not in prec.keys():
calculation_type=''
else:
calculation_type=prec["calculation_type"]
direction_type=prec["specimen_direction_type"]
if calculation_type !="":
beg_pca,end_pca="",""
for j in range(len(datablock)):
if data[j][0]==float(prec["measurement_step_min"]):beg_pca=j
if data[j][0]==float(prec["measurement_step_max"]):end_pca=j
if beg_pca=="" or end_pca=="":
if verbose:
print "something wrong with prior interpretation "
break
if calculation_type!="":
if beg_pca=="":beg_pca=0
if end_pca=="":end_pca=len(plotblock)-1
if geo==1 and tilt==0:
mpars=pmag.domean(geoblock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
pmagplotlib.plotDir(ZED,mpars,geoblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
if geo==1 and tilt==1:
mpars=pmag.domean(tiltblock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
pmagplotlib.plotDir(ZED,mpars,tiltblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
if geo==0 and tilt==0:
mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
if mpars["specimen_direction_type"]!="Error":
pmagplotlib.plotDir(ZED,mpars,plotblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
#
# print out data for this sample to screen
#
recnum=0
for plotrec in plotblock:
if units=='T' and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2],plotrec[6])
if units=="K" and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
if units=="J" and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0],' J',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
if 'K' in units and 'T' in units:
if plotrec[0]>=1. and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
if plotrec[0]<1. and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2],plotrec[6])
recnum += 1
if specimen!="":
if plot_file=="":
basename=locname+'_'+s
else:
basename=plot_file
files={}
for key in ZED.keys():
files[key]=basename+'_'+key+'.'+fmt
pmagplotlib.saveP(ZED,files)
sys.exit()
else: # interactive
if plots==0:
ans='b'
k+=1
changeS=0
while ans != "":
if len(CurrRecs)==0:
print """
g/b: indicates good/bad measurement. "bad" measurements excluded from calculation
set s[a]ve plot, [b]ounds for pca and calculate, [p]revious, [s]pecimen,
change [h]orizontal projection angle, change [c]oordinate systems,
[e]dit data, [q]uit:
"""
else:
print """
g/b: indicates good/bad measurement. "bad" measurements excluded from calculation
set s[a]ve plot, [b]ounds for pca and calculate, [p]revious, [s]pecimen,
change [h]orizontal projection angle, change [c]oordinate systems,
[d]elete current interpretation(s), [e]dit data, [q]uit:
"""
ans=raw_input('<Return> for next specimen \n')
setangle=0
if ans=='d': # delete this interpretation
CurrRecs=[]
k-=1 # replot same specimen
ans=""
changeS=1
if ans=='q':
if changeM==1:
ans=raw_input('Save changes to magic_measurements.txt? y/[n] ')
if ans=='y':
pmag.magic_write(meas_file,meas_data,'magic_measurements')
print "Good bye"
sys.exit()
if ans=='a':
if plot_file=="":
basename=locname+'_'+s+'_'
else:
basename=plot_file
files={}
for key in ZED.keys():
files[key]=basename+'_'+coord+'_'+key+'.'+fmt
pmagplotlib.saveP(ZED,files)
ans=""
if ans=='p':
k-=2
ans=""
backup=1
if ans=='c':
k-=1 # replot same block
if tilt==0 and geo ==1:print "You are currently viewing geographic coordinates "
if tilt==1 and geo ==1:print "You are currently viewing stratigraphic coordinates "
if tilt==0 and geo ==0: print "You are currently viewing sample coordinates "
print "\n Which coordinate system do you wish to view? "
coord=raw_input(" <Return> specimen, [g] geographic, [t] tilt corrected ")
if coord=="g":geo,tilt=1,0
if coord=="t":
geo=1
tilt=1
if coord=="":
coord='s'
geo=0
tilt=0
if geo==1 and sfile=="":
samp_file=raw_input(" Input er_samples file for sample orientations [er_samples.txt] " )
if samp_file=="":samp_file="er_samples.txt"
samp_data,file_type=pmag.magic_read(samp_file)
if file_type != 'er_samples':
print file_type
print "This is not a valid er_samples file - coordinate system not changed"
else:
sfile="ok"
ans=""
if ans=='s':
keepon=1
sample=raw_input('Enter desired specimen name (or first part there of): ')
while keepon==1:
try:
k =sids.index(sample)
keepon=0
except:
tmplist=[]
for qq in range(len(sids)):
if sample in sids[qq]:tmplist.append(sids[qq])
print sample," not found, but this was: "
print tmplist
sample=raw_input('Select one or try again\n ')
angle,direction_type="",""
setangle=0
ans=""
if ans=='h':
k-=1
angle=raw_input("Enter desired declination for X axis 0-360 ")
angle=float(angle)
if angle==0:angle=0.001
s=sids[k]
setangle=1
ans=""
if ans=='e':
k-=1
ans=""
recnum=0
for plotrec in plotblock:
if plotrec[0]<=200 and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f ' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2])
if plotrec[0]>200 and verbose: print '%s: %i %7.1f %s %8.3e %7.1f %7.1f ' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2])
recnum += 1
answer=raw_input('Enter index of point to change from bad to good or vice versa: ')
try:
ind=int(answer)
meas_data=pmag.mark_dmag_rec(s,ind,meas_data)
changeM=1
except:
'bad entry, try again'
if ans=='b':
if end_pca=="":end_pca=len(plotblock)-1
if beg_pca=="":beg_pca=0
k-=1 # stay on same sample until through
GoOn=0
while GoOn==0:
print 'Enter index of first point for pca: ','[',beg_pca,']'
answer=raw_input('return to keep default ')
if answer != "":
beg_pca=int(answer)
print 'Enter index of last point for pca: ','[',end_pca,']'
answer=raw_input('return to keep default ')
try:
end_pca=int(answer)
if plotblock[beg_pca][5]=='b' or plotblock[end_pca][5]=='b':
print "Can't select 'bad' measurement for PCA bounds -try again"
end_pca=len(plotblock)-1
beg_pca=0
elif beg_pca >=0 and beg_pca<=len(plotblock)-2 and end_pca>0 and end_pca<len(plotblock):
GoOn=1
else:
print beg_pca,end_pca, " are bad entry of indices - try again"
end_pca=len(plotblock)-1
beg_pca=0
except:
print beg_pca,end_pca, " are bad entry of indices - try again"
end_pca=len(plotblock)-1
beg_pca=0
GoOn=0
while GoOn==0:
if calculation_type!="":
print "Prior calculation type = ",calculation_type
ct=raw_input('Enter new Calculation Type: best-fit line, plane or fisher mean [l]/p/f : ' )
if ct=="" or ct=="l":
direction_type="l"
calculation_type="DE-BFL"
GoOn=1
elif ct=='p':
direction_type="p"
calculation_type="DE-BFP"
GoOn=1
elif ct=='f':
direction_type="l"
calculation_type="DE-FM"
GoOn=1
else:
print "bad entry of calculation type: try again. "
pmagplotlib.plotZED(ZED,plotblock,angle,s,units)
if verbose:pmagplotlib.drawFIGS(ZED)
if geo==1 and tilt==0:
mpars=pmag.domean(geoblock,beg_pca,end_pca,calculation_type)
if mpars['specimen_direction_type']=='Error':break
PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
if "SO-NO" not in method_codes:
PmagSpecRec["specimen_tilt_correction"]='0'
method_codes.append("DA-DIR-GEO")
else:
PmagSpecRec["specimen_tilt_correction"]='-1'
pmagplotlib.plotDir(ZED,mpars,geoblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
if geo==1 and tilt==1:
mpars=pmag.domean(tiltblock,beg_pca,end_pca,calculation_type)
if mpars['specimen_direction_type']=='Error':break
PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
if "SO-NO" not in method_codes:
PmagSpecRec["specimen_tilt_correction"]='100'
method_codes.append("DA-DIR-TILT")
else:
PmagSpecRec["specimen_tilt_correction"]='-1'
pmagplotlib.plotDir(ZED,mpars,tiltblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
if geo==0 and tilt==0:
mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
if mpars['specimen_direction_type']=='Error':break
PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
PmagSpecRec["specimen_tilt_correction"]='-1'
pmagplotlib.plotDir(ZED,mpars,plotblock,angle)
if verbose:pmagplotlib.drawFIGS(ZED)
PmagSpecRec["measurement_step_min"]='%8.3e ' %(mpars["measurement_step_min"])
PmagSpecRec["measurement_step_max"]='%8.3e ' %(mpars["measurement_step_max"])
PmagSpecRec["specimen_correction"]='u'
PmagSpecRec["specimen_dang"]='%7.1f ' %(mpars['specimen_dang'])
print 'DANG: ',PmagSpecRec["specimen_dang"]
if calculation_type!='DE-FM':
PmagSpecRec["specimen_mad"]='%7.1f ' %(mpars["specimen_mad"])
PmagSpecRec["specimen_alpha95"]=""
else:
PmagSpecRec["specimen_alpha95"]='%7.1f ' %(mpars["specimen_alpha95"])
PmagSpecRec["specimen_mad"]=""
PmagSpecRec["specimen_n"]='%i ' %(mpars["specimen_n"])
PmagSpecRec["specimen_direction_type"]=direction_type
PmagSpecRec["calculation_type"]=calculation_type # redundant and won't be imported - just for convenience
method_codes=PmagSpecRec["magic_method_codes"].split(':')
if len(method_codes) != 0:
methstring=""
for meth in method_codes:
ctype=meth.split('-')
if 'DE' not in ctype:methstring=methstring+ ":" +meth # don't include old direction estimation methods
methstring=methstring+':'+calculation_type
PmagSpecRec["magic_method_codes"]= methstring.strip(':')
print 'Method codes: ',PmagSpecRec['magic_method_codes']
if calculation_type!='DE-FM':
if units=='K':
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])-273,float(PmagSpecRec["measurement_step_max"])-273,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
elif units== 'T':
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])*1e3,float(PmagSpecRec["measurement_step_max"])*1e3,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
elif 'T' in units and 'K' in units:
if float(PmagSpecRec['measurement_step_min'])<1.0 :
min=float(PmagSpecRec['measurement_step_min'])*1e3
else:
min=float(PmagSpecRec['measurement_step_min'])-273
if float(PmagSpecRec['measurement_step_max'])<1.0 :
max=float(PmagSpecRec['measurement_step_max'])*1e3
else:
max=float(PmagSpecRec['measurement_step_max'])-273
print '%s %i %7.1f %i %i %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),min,max,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
else:
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"]),float(PmagSpecRec["measurement_step_max"]),float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
else:
if 'K' in units:
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])-273,float(PmagSpecRec["measurement_step_max"])-273,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
elif 'T' in units:
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])*1e3,float(PmagSpecRec["measurement_step_max"])*1e3,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
elif 'T' in units and 'K' in units:
if float(PmagSpecRec['measurement_step_min'])<1.0 :
min=float(PmagSpecRec['measurement_step_min'])*1e3
else:
min=float(PmagSpecRec['measurement_step_min'])-273
if float(PmagSpecRec['measurement_step_max'])<1.0 :
max=float(PmagSpecRec['measurement_step_max'])*1e3
else:
max=float(PmagSpecRec['measurement_step_max'])-273
print '%s %i %7.1f %i %i %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),min,max,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
else:
print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["measurement_step_min"]),float(PmagSpecRec["measurement_step_max"]),float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
saveit=raw_input("Save this interpretation? [y]/n \n")
if saveit!="n":
changeS=1
#
# put in details
#
angle,direction_type,setangle="","",0
if len(CurrRecs)>0:
replace=raw_input(" [0] add new component, or [1] replace existing interpretation(s) [default is replace] ")
if replace=="1" or replace=="":
CurrRecs=[]
PmagSpecRec['specimen_comp_name']='A'
CurrRecs.append(PmagSpecRec)
else:
print 'These are the current component names for this specimen: '
for trec in CurrRecs:print trec['specimen_comp_name']
compnum=raw_input("Enter new component name: ")
PmagSpecRec['specimen_comp_name']=compnum
print "Adding new component: ",PmagSpecRec['specimen_comp_name']
CurrRecs.append(PmagSpecRec)
else:
PmagSpecRec['specimen_comp_name']='A'
CurrRecs.append(PmagSpecRec)
k+=1
ans=""
else:
ans=""
else: # plots=1
k+=1
files={}
locname.replace('/','-')
print PmagSpecRec
for key in ZED.keys():
files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_'+coord+'_TY:_'+key+'_.'+fmt
if pmagplotlib.isServer:
black = '#000000'
purple = '#800080'
titles={}
titles['demag']='DeMag Plot'
titles['zijd']='Zijderveld Plot'
titles['eqarea']='Equal Area Plot'
ZED = pmagplotlib.addBorders(ZED,titles,black,purple)
pmagplotlib.saveP(ZED,files)
if len(CurrRecs)>0:
for rec in CurrRecs: PriorRecs.append(rec)
if changeS==1:
if len(PriorRecs)>0:
save_redo(PriorRecs,inspec)
else:
os.system('rm '+inspec)
CurrRecs,beg_pca,end_pca=[],"","" # next up
changeS=0
else: k+=1 # skip record - not enough data
if changeM==1:
pmag.magic_write(meas_file,meas_data,'magic_measurements')