def test_get_value(self): config_file_path = "./test_config_file3.cfg" cs = CarSettings(optional_config_file_path=config_file_path) value = cs.get_value("userHandle") self.assertEqual(value, 'your_tinkla_username') value = cs.get_value("doAutoUpdate") self.assertEqual(value, True) os.remove(config_file_path)
def is_on_hotspot(): try: result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg result = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0] is_android = result.startswith('192.168.43.') is_ios = result.startswith('172.20.10.') car_set = CarSettings() blockUploadWhileTethering = car_set.get_value("blockUploadWhileTethering") tetherIP = car_set.get_value("tetherIP") is_other_tether = blockUploadWhileTethering and result.startswith(tetherIP) is_entune = result.startswith('10.0.2.') return (is_android or is_ios or is_other_tether or is_entune) except: return False
def thermald_thread(): #BB # if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg car_set = CarSettings() limitBatteryMinMax = car_set.get_value("limitBatteryMinMax") batt_min = car_set.get_value("limitBattery_Min") batt_max = car_set.get_value("limitBattery_Max") # prevent LEECO from undervoltage BATT_PERC_OFF = 10 if LEON else 3 health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency # now loop thermal_sock = messaging.pub_sock('thermal') health_sock = messaging.sub_sock('health', timeout=health_timeout) location_sock = messaging.sub_sock('gpsLocation') ignition = False fan_speed = 0 count = 0 off_ts = None started_ts = None started_seen = False thermal_status = ThermalStatus.green thermal_status_prev = ThermalStatus.green usb_power = True usb_power_prev = True network_type = NetworkType.none network_strength = NetworkStrength.unknown current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML) health_prev = None fw_version_match_prev = True current_connectivity_alert = None time_valid_prev = True should_start_prev = False is_uno = (read_tz(29, clip=False) < -1000) if is_uno or not ANDROID: handle_fan = handle_fan_uno else: setup_eon_fan() handle_fan = handle_fan_eon # Make sure charging is enabled charging_disabled = False os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled') params = Params() pm = PowerMonitoring(is_uno) while 1: health = messaging.recv_sock(health_sock, wait=True) location = messaging.recv_sock(location_sock) location = location.gpsLocation if location else None msg = read_thermal() # clear car params when panda gets disconnected if health is None and health_prev is not None: params.panda_disconnect() health_prev = health if health is not None: usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client # get_network_type is an expensive call. update every 10s if (count % int(10. / DT_TRML)) == 0: try: network_type = get_network_type() network_strength = get_network_strength(network_type) except Exception: cloudlog.exception("Error getting network status") msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0 msg.thermal.memUsedPercent = int(round( psutil.virtual_memory().percent)) msg.thermal.cpuPerc = int(round(psutil.cpu_percent())) msg.thermal.networkType = network_type msg.thermal.networkStrength = network_strength msg.thermal.batteryPercent = get_battery_capacity() msg.thermal.batteryStatus = get_battery_status() msg.thermal.batteryCurrent = get_battery_current() msg.thermal.batteryVoltage = get_battery_voltage() msg.thermal.usbOnline = get_usb_present() # Fake battery levels on uno for frame if is_uno: msg.thermal.batteryPercent = 100 msg.thermal.batteryStatus = "Charging" current_filter.update(msg.thermal.batteryCurrent / 1e6) # TODO: add car battery voltage check max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2, msg.thermal.cpu3) / 10.0 max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.) bat_temp = msg.thermal.bat / 1000. fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition) msg.thermal.fanSpeed = fan_speed # thermal logic with hysterisis if max_cpu_temp > 107. or bat_temp >= 63.: # onroad not allowed thermal_status = ThermalStatus.danger elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C # hysteresis between onroad not allowed and engage not allowed thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger) elif max_cpu_temp > 87.5: # hysteresis between engage not allowed and uploader not allowed thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red) elif max_cpu_temp > 80.0: # uploader not allowed thermal_status = ThermalStatus.yellow elif max_cpu_temp > 75.0: # hysteresis between uploader not allowed and all good thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow) else: # all good thermal_status = ThermalStatus.green # **** starting logic **** # Check for last update time and display alerts if needed now = datetime.datetime.now() # show invalid date/time alert time_valid = now.year >= 2019 if time_valid and not time_valid_prev: params.delete("Offroad_InvalidTime") if not time_valid and time_valid_prev: params.put("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"])) time_valid_prev = time_valid # Show update prompt try: last_update = datetime.datetime.fromisoformat( params.get("LastUpdateTime", encoding='utf8')) except (TypeError, ValueError): last_update = now dt = now - last_update update_failed_count = params.get("UpdateFailedCount") update_failed_count = 0 if update_failed_count is None else int( update_failed_count) if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1: if current_connectivity_alert != "expired": current_connectivity_alert = "expired" params.delete("Offroad_ConnectivityNeededPrompt") params.put( "Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"])) elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT: remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0)) if current_connectivity_alert != "prompt" + remaining_time: current_connectivity_alert = "prompt" + remaining_time alert_connectivity_prompt = copy.copy( OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"]) alert_connectivity_prompt["text"] += remaining_time + " days." params.delete("Offroad_ConnectivityNeeded") params.put("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt)) elif current_connectivity_alert is not None: current_connectivity_alert = None params.delete("Offroad_ConnectivityNeeded") params.delete("Offroad_ConnectivityNeededPrompt") # start constellation of processes when the car starts ignition = health is not None and (health.health.ignitionLine or health.health.ignitionCan) do_uninstall = params.get("DoUninstall") == b"1" accepted_terms = params.get("HasAcceptedTerms") == terms_version completed_training = params.get( "CompletedTrainingVersion") == training_version panda_signature = params.get("PandaFirmware") fw_version_match = (panda_signature is None) or ( panda_signature == FW_SIGNATURE ) # don't show alert is no panda is connected (None) should_start = ignition # with 2% left, we killall, otherwise the phone will take a long time to boot should_start = should_start and msg.thermal.freeSpace > 0.02 # confirm we have completed training and aren't uninstalling should_start = should_start and accepted_terms and completed_training and ( not do_uninstall) # check for firmware mismatch should_start = should_start and fw_version_match # check if system time is valid should_start = should_start and time_valid # don't start while taking snapshot if not should_start_prev: is_taking_snapshot = params.get("IsTakingSnapshot") == b"1" should_start = should_start and (not is_taking_snapshot) if fw_version_match and not fw_version_match_prev: params.delete("Offroad_PandaFirmwareMismatch") if not fw_version_match and fw_version_match_prev: params.put( "Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"])) # if any CPU gets above 107 or the battery gets above 63, kill all processes # controls will warn with CPU above 95 or battery above 60 if thermal_status >= ThermalStatus.danger: should_start = False if thermal_status_prev < ThermalStatus.danger: params.put( "Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"])) else: if thermal_status_prev >= ThermalStatus.danger: params.delete("Offroad_TemperatureTooHigh") if should_start: if not should_start_prev: params.delete("IsOffroad") off_ts = None if started_ts is None: params.car_start() started_ts = sec_since_boot() started_seen = True os.system( 'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor' ) else: if should_start_prev or (count == 0): params.put("IsOffroad", "1") started_ts = None if off_ts is None: off_ts = sec_since_boot() os.system( 'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor' ) # shutdown if the battery gets lower than 3%, it's discharging, we aren't running for # more than a minute but we were running if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \ started_seen and (sec_since_boot() - off_ts) > 60: os.system('LD_LIBRARY_PATH="" svc power shutdown') # Offroad power monitoring pm.calculate(health) msg.thermal.offroadPowerUsage = pm.get_power_used() #BB have to figure how to disable charging now charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg, limitBatteryMinMax, batt_min, batt_max) msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 and not charging_disabled # if current is positive, then battery is being discharged msg.thermal.started = started_ts is not None msg.thermal.startedTs = int(1e9 * (started_ts or 0)) msg.thermal.thermalStatus = thermal_status thermal_sock.send(msg.to_bytes()) if usb_power_prev and not usb_power: params.put("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"])) elif usb_power and not usb_power_prev: params.delete("Offroad_ChargeDisabled") thermal_status_prev = thermal_status usb_power_prev = usb_power fw_version_match_prev = fw_version_match should_start_prev = should_start # report to server once per minute if (count % int(60. / DT_TRML)) == 0: cloudlog.event("STATUS_PACKET", count=count, health=(health.to_dict() if health else None), location=(location.to_dict() if location else None), thermal=msg.to_dict()) count += 1
def thermald_thread(): # if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg car_set = CarSettings() limitBatteryMinMax = car_set.get_value("limitBatteryMinMax") batt_min = car_set.get_value("limitBattery_Min") batt_max = car_set.get_value("limitBattery_Max") setup_eon_fan() # prevent LEECO from undervoltage BATT_PERC_OFF = 10 if LEON else 3 health_timeout = int(1000 * 2 * DT_TRML) # 2x the expected health frequency # now loop thermal_sock = messaging.pub_sock('thermal') health_sock = messaging.sub_sock('health', timeout=health_timeout) location_sock = messaging.sub_sock('gpsLocation') fan_speed = 0 count = 0 off_ts = None started_ts = None started_seen = False thermal_status = ThermalStatus.green thermal_status_prev = ThermalStatus.green usb_power = True usb_power_prev = True current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML) health_prev = None fw_version_match_prev = True current_connectivity_alert = None time_valid_prev = True # Make sure charging is enabled charging_disabled = False os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled') params = Params() while 1: health = messaging.recv_sock(health_sock, wait=True) location = messaging.recv_sock(location_sock) location = location.gpsLocation if location else None msg = read_thermal() # clear car params when panda gets disconnected if health is None and health_prev is not None: params.panda_disconnect() health_prev = health if health is not None: usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client # loggerd is gated based on free space avail = get_available_percent() / 100.0 # thermal message now also includes free space msg.thermal.freeSpace = avail charger_off = False with open("/sys/class/power_supply/battery/capacity") as f: msg.thermal.batteryPercent = int(f.read()) with open("/sys/class/power_supply/battery/status") as f: msg.thermal.batteryStatus = f.read().strip() with open("/sys/class/power_supply/battery/current_now") as f: msg.thermal.batteryCurrent = int(f.read()) with open("/sys/class/power_supply/battery/voltage_now") as f: msg.thermal.batteryVoltage = int(f.read()) with open("/sys/class/power_supply/usb/present") as f: msg.thermal.usbOnline = bool(int(f.read())) with open("/sys/class/power_supply/battery/charge_type") as f: charger_status = f.read().strip() charger_off = (charger_status == "N/A") current_filter.update(msg.thermal.batteryCurrent / 1e6) # TODO: add car battery voltage check max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2, msg.thermal.cpu3) / 10.0 max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.) bat_temp = msg.thermal.bat/1000. if health is not None and health.health.hwType == log.HealthData.HwType.uno: fan_speed = handle_fan_uno(max_cpu_temp, bat_temp, fan_speed) else: fan_speed = handle_fan_eon(max_cpu_temp, bat_temp, fan_speed) msg.thermal.fanSpeed = fan_speed # thermal logic with hysterisis if max_cpu_temp > 107. or bat_temp >= 63.: # onroad not allowed thermal_status = ThermalStatus.danger elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C # hysteresis between onroad not allowed and engage not allowed thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger) elif max_cpu_temp > 87.5: # hysteresis between engage not allowed and uploader not allowed thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red) elif max_cpu_temp > 80.0: # uploader not allowed thermal_status = ThermalStatus.yellow elif max_cpu_temp > 75.0: # hysteresis between uploader not allowed and all good thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow) else: # all good thermal_status = ThermalStatus.green # **** starting logic **** # Check for last update time and display alerts if needed now = datetime.datetime.now() # show invalid date/time alert time_valid = now.year >= 2019 if time_valid and not time_valid_prev: params.delete("Offroad_InvalidTime") if not time_valid and time_valid_prev: params.put("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"])) time_valid_prev = time_valid # Show update prompt try: last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8')) except (TypeError, ValueError): last_update = now dt = now - last_update if dt.days > DAYS_NO_CONNECTIVITY_MAX: if current_connectivity_alert != "expired": current_connectivity_alert = "expired" params.delete("Offroad_ConnectivityNeededPrompt") params.put("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"])) elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT: remaining_time = str(DAYS_NO_CONNECTIVITY_MAX - dt.days) if current_connectivity_alert != "prompt" + remaining_time: current_connectivity_alert = "prompt" + remaining_time alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"]) alert_connectivity_prompt["text"] += remaining_time + " days." params.delete("Offroad_ConnectivityNeeded") params.put("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt)) elif current_connectivity_alert is not None: current_connectivity_alert = None params.delete("Offroad_ConnectivityNeeded") params.delete("Offroad_ConnectivityNeededPrompt") # start constellation of processes when the car starts ignition = health is not None and (health.health.ignitionLine or health.health.ignitionCan) do_uninstall = params.get("DoUninstall") == b"1" accepted_terms = params.get("HasAcceptedTerms") == terms_version completed_training = params.get("CompletedTrainingVersion") == training_version fw_version = params.get("PandaFirmware", encoding="utf8") fw_version_match = fw_version is None or fw_version.startswith(FW_VERSION) # don't show alert is no panda is connected (None) should_start = ignition # have we seen a panda? passive = (params.get("Passive") == "1") # with 2% left, we killall, otherwise the phone will take a long time to boot should_start = should_start and msg.thermal.freeSpace > 0.02 # confirm we have completed training and aren't uninstalling should_start = should_start and accepted_terms and (passive or completed_training) and (not do_uninstall) # check for firmware mismatch should_start = should_start and fw_version_match # check if system time is valid should_start = should_start and time_valid if fw_version_match and not fw_version_match_prev: params.delete("Offroad_PandaFirmwareMismatch") if not fw_version_match and fw_version_match_prev: params.put("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"])) # if any CPU gets above 107 or the battery gets above 63, kill all processes # controls will warn with CPU above 95 or battery above 60 if thermal_status >= ThermalStatus.danger: should_start = False if thermal_status_prev < ThermalStatus.danger: params.put("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"])) else: if thermal_status_prev >= ThermalStatus.danger: params.delete("Offroad_TemperatureTooHigh") if should_start: off_ts = None if started_ts is None: params.car_start() started_ts = sec_since_boot() started_seen = True os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor') else: started_ts = None if off_ts is None: off_ts = sec_since_boot() os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor') # shutdown if the battery gets lower than 3%, it's discharging, we aren't running for # more than a minute but we were running if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \ started_seen and (sec_since_boot() - off_ts) > 60: os.system('LD_LIBRARY_PATH="" svc power shutdown') charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg, limitBatteryMinMax, batt_min, batt_max) msg.thermal.chargingDisabled = charging_disabled #BB added "and not charging_disabled" below so we don't show red LED when not charging msg.thermal.chargingError = (current_filter.x > 0.) and (msg.thermal.batteryPercent < 90) and not charging_disabled # if current is > 1A out, then charger might be off msg.thermal.started = started_ts is not None msg.thermal.startedTs = int(1e9*(started_ts or 0)) msg.thermal.thermalStatus = thermal_status thermal_sock.send(msg.to_bytes()) if usb_power_prev and not usb_power: params.put("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"])) elif usb_power and not usb_power_prev: params.delete("Offroad_ChargeDisabled") thermal_status_prev = thermal_status usb_power_prev = usb_power fw_version_match_prev = fw_version_match #print(msg) # report to server once per minute if (count % int(60. / DT_TRML)) == 0: cloudlog.event("STATUS_PACKET", count=count, health=(health.to_dict() if health else None), location=(location.to_dict() if location else None), thermal=msg.to_dict()) count += 1
def thermald_thread(): # if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg car_set = CarSettings() limitBatteryMinMax = car_set.get_value("limitBatteryMinMax") batt_min = car_set.get_value("limitBattery_Min") batt_max = car_set.get_value("limitBattery_Max") setup_eon_fan() # prevent LEECO from undervoltage BATT_PERC_OFF = 10 if LEON else 3 # now loop thermal_sock = messaging.pub_sock(service_list['thermal'].port) health_sock = messaging.sub_sock(service_list['health'].port) location_sock = messaging.sub_sock(service_list['gpsLocation'].port) fan_speed = 0 count = 0 off_ts = None started_ts = None ignition_seen = False started_seen = False thermal_status = ThermalStatus.green health_sock.RCVTIMEO = int(1000 * 2 * DT_TRML) # 2x the expected health frequency current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML) health_prev = None # Make sure charging is enabled charging_disabled = False os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled') params = Params() while 1: health = messaging.recv_sock(health_sock, wait=True) location = messaging.recv_sock(location_sock) location = location.gpsLocation if location else None msg = read_thermal() # clear car params when panda gets disconnected if health is None and health_prev is not None: params.panda_disconnect() health_prev = health # loggerd is gated based on free space avail = get_available_percent() / 100.0 # thermal message now also includes free space msg.thermal.freeSpace = avail charger_off = False with open("/sys/class/power_supply/battery/capacity") as f: msg.thermal.batteryPercent = int(f.read()) with open("/sys/class/power_supply/battery/status") as f: msg.thermal.batteryStatus = f.read().strip() with open("/sys/class/power_supply/battery/current_now") as f: msg.thermal.batteryCurrent = int(f.read()) with open("/sys/class/power_supply/battery/voltage_now") as f: msg.thermal.batteryVoltage = int(f.read()) with open("/sys/class/power_supply/usb/present") as f: msg.thermal.usbOnline = bool(int(f.read())) with open("/sys/class/power_supply/battery/charge_type") as f: charger_status = f.read().strip() charger_off = (charger_status == "N/A") current_filter.update(msg.thermal.batteryCurrent / 1e6) # TODO: add car battery voltage check max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1, msg.thermal.cpu2, msg.thermal.cpu3) / 10.0 max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.) bat_temp = msg.thermal.bat/1000. fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed) msg.thermal.fanSpeed = fan_speed # thermal logic with hysterisis if max_cpu_temp > 107. or bat_temp >= 63.: # onroad not allowed thermal_status = ThermalStatus.danger elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C # hysteresis between onroad not allowed and engage not allowed thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger) elif max_cpu_temp > 87.5: # hysteresis between engage not allowed and uploader not allowed thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red) elif max_cpu_temp > 80.0: # uploader not allowed thermal_status = ThermalStatus.yellow elif max_cpu_temp > 75.0: # hysteresis between uploader not allowed and all good thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow) else: # all good thermal_status = ThermalStatus.green # **** starting logic **** # start constellation of processes when the car starts ignition = health is not None and health.health.started # print "Ignition from panda: ", ignition ignition_seen = ignition_seen or ignition # add voltage check for ignition #if not ignition_seen and health is not None and health.health.voltage > 13500: # ignition = True do_uninstall = params.get("DoUninstall") == "1" accepted_terms = params.get("HasAcceptedTerms") == terms_version completed_training = params.get("CompletedTrainingVersion") == training_version should_start = ignition # have we seen a panda? passive = (params.get("Passive") == "1") # with 2% left, we killall, otherwise the phone will take a long time to boot should_start = should_start and msg.thermal.freeSpace > 0.02 # confirm we have completed training and aren't uninstalling should_start = should_start and accepted_terms and (passive or completed_training) and (not do_uninstall) # if any CPU gets above 107 or the battery gets above 63, kill all processes # controls will warn with CPU above 95 or battery above 60 if thermal_status >= ThermalStatus.danger: # TODO: Add a better warning when this is happening should_start = False if should_start: off_ts = None if started_ts is None: params.car_start() started_ts = sec_since_boot() started_seen = True os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor') else: started_ts = None if off_ts is None: off_ts = sec_since_boot() os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor') # shutdown if the battery gets lower than 3%, it's discharging, we aren't running for # more than a minute but we were running if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \ started_seen and (sec_since_boot() - off_ts) > 60: os.system('LD_LIBRARY_PATH="" svc power shutdown') charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg, limitBatteryMinMax, batt_min, batt_max) msg.thermal.chargingDisabled = charging_disabled #BB added "and not charging_disabled" below so we don't show red LED when not charging msg.thermal.chargingError = (current_filter.x > 0.) and (msg.thermal.batteryPercent < 90) and not charging_disabled # if current is > 1A out, then charger might be off msg.thermal.started = started_ts is not None msg.thermal.startedTs = int(1e9*(started_ts or 0)) msg.thermal.thermalStatus = thermal_status thermal_sock.send(msg.to_bytes()) #print msg # report to server once per minute if (count % int(60. / DT_TRML)) == 0: cloudlog.event("STATUS_PACKET", count=count, health=(health.to_dict() if health else None), location=(location.to_dict() if location else None), thermal=msg.to_dict()) count += 1