def test_get_value(self):
config_file_path = "./test_config_file3.cfg"
cs = CarSettings(optional_config_file_path=config_file_path)
value = cs.get_value("userHandle")
self.assertEqual(value, 'your_tinkla_username')
value = cs.get_value("doAutoUpdate")
self.assertEqual(value, True)
os.remove(config_file_path)
def is_on_hotspot():
try:
result = subprocess.check_output(["ifconfig", "wlan0"], encoding='utf8') # pylint: disable=unexpected-keyword-arg
result = re.findall(r"inet addr:((\d+\.){3}\d+)", result)[0][0]
is_android = result.startswith('192.168.43.')
is_ios = result.startswith('172.20.10.')
car_set = CarSettings()
blockUploadWhileTethering = car_set.get_value("blockUploadWhileTethering")
tetherIP = car_set.get_value("tetherIP")
is_other_tether = blockUploadWhileTethering and result.startswith(tetherIP)
is_entune = result.startswith('10.0.2.')
return (is_android or is_ios or is_other_tether or is_entune)
except:
return False
def thermald_thread():
#BB
# if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg
car_set = CarSettings()
limitBatteryMinMax = car_set.get_value("limitBatteryMinMax")
batt_min = car_set.get_value("limitBattery_Min")
batt_max = car_set.get_value("limitBattery_Max")
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
health_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
ignition = False
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
should_start_prev = False
is_uno = (read_tz(29, clip=False) < -1000)
if is_uno or not ANDROID:
handle_fan = handle_fan_uno
else:
setup_eon_fan()
handle_fan = handle_fan_eon
# Make sure charging is enabled
charging_disabled = False
os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled')
params = Params()
pm = PowerMonitoring(is_uno)
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
# clear car params when panda gets disconnected
if health is None and health_prev is not None:
params.panda_disconnect()
health_prev = health
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = get_network_type()
network_strength = get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(
psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1,
msg.thermal.cpu2, msg.thermal.cpu3) / 10.0
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10.,
msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat / 1000.
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, ignition)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.now()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
params.put("Offroad_InvalidTime",
json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
if dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
params.put(
"Offroad_ConnectivityNeeded",
json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(
OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
params.put("Offroad_ConnectivityNeededPrompt",
json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
# start constellation of processes when the car starts
ignition = health is not None and (health.health.ignitionLine
or health.health.ignitionCan)
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get(
"CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
fw_version_match = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
should_start = ignition
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and completed_training and (
not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
# don't start while taking snapshot
if not should_start_prev:
is_taking_snapshot = params.get("IsTakingSnapshot") == b"1"
should_start = should_start and (not is_taking_snapshot)
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
params.put(
"Offroad_PandaFirmwareMismatch",
json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
params.put(
"Offroad_TemperatureTooHigh",
json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
params.car_start()
started_ts = sec_since_boot()
started_seen = True
os.system(
'echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
else:
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system(
'echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor'
)
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
#BB have to figure how to disable charging now
charging_disabled = check_car_battery_voltage(should_start, health,
charging_disabled, msg,
limitBatteryMinMax,
batt_min, batt_max)
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 and not charging_disabled # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9 * (started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
params.put("Offroad_ChargeDisabled",
json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
should_start_prev = should_start
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg
car_set = CarSettings()
limitBatteryMinMax = car_set.get_value("limitBatteryMinMax")
batt_min = car_set.get_value("limitBattery_Min")
batt_max = car_set.get_value("limitBattery_Max")
setup_eon_fan()
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
health_timeout = int(1000 * 2 * DT_TRML) # 2x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
thermal_status_prev = ThermalStatus.green
usb_power = True
usb_power_prev = True
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
health_prev = None
fw_version_match_prev = True
current_connectivity_alert = None
time_valid_prev = True
# Make sure charging is enabled
charging_disabled = False
os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled')
params = Params()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
# clear car params when panda gets disconnected
if health is None and health_prev is not None:
params.panda_disconnect()
health_prev = health
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# loggerd is gated based on free space
avail = get_available_percent() / 100.0
# thermal message now also includes free space
msg.thermal.freeSpace = avail
charger_off = False
with open("/sys/class/power_supply/battery/capacity") as f:
msg.thermal.batteryPercent = int(f.read())
with open("/sys/class/power_supply/battery/status") as f:
msg.thermal.batteryStatus = f.read().strip()
with open("/sys/class/power_supply/battery/current_now") as f:
msg.thermal.batteryCurrent = int(f.read())
with open("/sys/class/power_supply/battery/voltage_now") as f:
msg.thermal.batteryVoltage = int(f.read())
with open("/sys/class/power_supply/usb/present") as f:
msg.thermal.usbOnline = bool(int(f.read()))
with open("/sys/class/power_supply/battery/charge_type") as f:
charger_status = f.read().strip()
charger_off = (charger_status == "N/A")
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1,
msg.thermal.cpu2, msg.thermal.cpu3) / 10.0
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat/1000.
if health is not None and health.health.hwType == log.HealthData.HwType.uno:
fan_speed = handle_fan_uno(max_cpu_temp, bat_temp, fan_speed)
else:
fan_speed = handle_fan_eon(max_cpu_temp, bat_temp, fan_speed)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.now()
# show invalid date/time alert
time_valid = now.year >= 2019
if time_valid and not time_valid_prev:
params.delete("Offroad_InvalidTime")
if not time_valid and time_valid_prev:
params.put("Offroad_InvalidTime", json.dumps(OFFROAD_ALERTS["Offroad_InvalidTime"]))
time_valid_prev = time_valid
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
if dt.days > DAYS_NO_CONNECTIVITY_MAX:
if current_connectivity_alert != "expired":
current_connectivity_alert = "expired"
params.delete("Offroad_ConnectivityNeededPrompt")
params.put("Offroad_ConnectivityNeeded", json.dumps(OFFROAD_ALERTS["Offroad_ConnectivityNeeded"]))
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(DAYS_NO_CONNECTIVITY_MAX - dt.days)
if current_connectivity_alert != "prompt" + remaining_time:
current_connectivity_alert = "prompt" + remaining_time
alert_connectivity_prompt = copy.copy(OFFROAD_ALERTS["Offroad_ConnectivityNeededPrompt"])
alert_connectivity_prompt["text"] += remaining_time + " days."
params.delete("Offroad_ConnectivityNeeded")
params.put("Offroad_ConnectivityNeededPrompt", json.dumps(alert_connectivity_prompt))
elif current_connectivity_alert is not None:
current_connectivity_alert = None
params.delete("Offroad_ConnectivityNeeded")
params.delete("Offroad_ConnectivityNeededPrompt")
# start constellation of processes when the car starts
ignition = health is not None and (health.health.ignitionLine or health.health.ignitionCan)
do_uninstall = params.get("DoUninstall") == b"1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
fw_version = params.get("PandaFirmware", encoding="utf8")
fw_version_match = fw_version is None or fw_version.startswith(FW_VERSION) # don't show alert is no panda is connected (None)
should_start = ignition
# have we seen a panda?
passive = (params.get("Passive") == "1")
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and (passive or completed_training) and (not do_uninstall)
# check for firmware mismatch
should_start = should_start and fw_version_match
# check if system time is valid
should_start = should_start and time_valid
if fw_version_match and not fw_version_match_prev:
params.delete("Offroad_PandaFirmwareMismatch")
if not fw_version_match and fw_version_match_prev:
params.put("Offroad_PandaFirmwareMismatch", json.dumps(OFFROAD_ALERTS["Offroad_PandaFirmwareMismatch"]))
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
should_start = False
if thermal_status_prev < ThermalStatus.danger:
params.put("Offroad_TemperatureTooHigh", json.dumps(OFFROAD_ALERTS["Offroad_TemperatureTooHigh"]))
else:
if thermal_status_prev >= ThermalStatus.danger:
params.delete("Offroad_TemperatureTooHigh")
if should_start:
off_ts = None
if started_ts is None:
params.car_start()
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg, limitBatteryMinMax, batt_min, batt_max)
msg.thermal.chargingDisabled = charging_disabled
#BB added "and not charging_disabled" below so we don't show red LED when not charging
msg.thermal.chargingError = (current_filter.x > 0.) and (msg.thermal.batteryPercent < 90) and not charging_disabled # if current is > 1A out, then charger might be off
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
if usb_power_prev and not usb_power:
params.put("Offroad_ChargeDisabled", json.dumps(OFFROAD_ALERTS["Offroad_ChargeDisabled"]))
elif usb_power and not usb_power_prev:
params.delete("Offroad_ChargeDisabled")
thermal_status_prev = thermal_status
usb_power_prev = usb_power
fw_version_match_prev = fw_version_match
#print(msg)
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
# if limitting battery to Min-Max%. edit /data/bb_openpilot.cfg
car_set = CarSettings()
limitBatteryMinMax = car_set.get_value("limitBatteryMinMax")
batt_min = car_set.get_value("limitBattery_Min")
batt_max = car_set.get_value("limitBattery_Max")
setup_eon_fan()
# prevent LEECO from undervoltage
BATT_PERC_OFF = 10 if LEON else 3
# now loop
thermal_sock = messaging.pub_sock(service_list['thermal'].port)
health_sock = messaging.sub_sock(service_list['health'].port)
location_sock = messaging.sub_sock(service_list['gpsLocation'].port)
fan_speed = 0
count = 0
off_ts = None
started_ts = None
ignition_seen = False
started_seen = False
thermal_status = ThermalStatus.green
health_sock.RCVTIMEO = int(1000 * 2 * DT_TRML) # 2x the expected health frequency
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
health_prev = None
# Make sure charging is enabled
charging_disabled = False
os.system('echo "1" > /sys/class/power_supply/battery/charging_enabled')
params = Params()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal()
# clear car params when panda gets disconnected
if health is None and health_prev is not None:
params.panda_disconnect()
health_prev = health
# loggerd is gated based on free space
avail = get_available_percent() / 100.0
# thermal message now also includes free space
msg.thermal.freeSpace = avail
charger_off = False
with open("/sys/class/power_supply/battery/capacity") as f:
msg.thermal.batteryPercent = int(f.read())
with open("/sys/class/power_supply/battery/status") as f:
msg.thermal.batteryStatus = f.read().strip()
with open("/sys/class/power_supply/battery/current_now") as f:
msg.thermal.batteryCurrent = int(f.read())
with open("/sys/class/power_supply/battery/voltage_now") as f:
msg.thermal.batteryVoltage = int(f.read())
with open("/sys/class/power_supply/usb/present") as f:
msg.thermal.usbOnline = bool(int(f.read()))
with open("/sys/class/power_supply/battery/charge_type") as f:
charger_status = f.read().strip()
charger_off = (charger_status == "N/A")
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = max(msg.thermal.cpu0, msg.thermal.cpu1,
msg.thermal.cpu2, msg.thermal.cpu3) / 10.0
max_comp_temp = max(max_cpu_temp, msg.thermal.mem / 10., msg.thermal.gpu / 10.)
bat_temp = msg.thermal.bat/1000.
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed)
msg.thermal.fanSpeed = fan_speed
# thermal logic with hysterisis
if max_cpu_temp > 107. or bat_temp >= 63.:
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 92.5 or bat_temp > 60.: # CPU throttling starts around ~90C
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 87.5:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# start constellation of processes when the car starts
ignition = health is not None and health.health.started
# print "Ignition from panda: ", ignition
ignition_seen = ignition_seen or ignition
# add voltage check for ignition
#if not ignition_seen and health is not None and health.health.voltage > 13500:
# ignition = True
do_uninstall = params.get("DoUninstall") == "1"
accepted_terms = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
should_start = ignition
# have we seen a panda?
passive = (params.get("Passive") == "1")
# with 2% left, we killall, otherwise the phone will take a long time to boot
should_start = should_start and msg.thermal.freeSpace > 0.02
# confirm we have completed training and aren't uninstalling
should_start = should_start and accepted_terms and (passive or completed_training) and (not do_uninstall)
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
if thermal_status >= ThermalStatus.danger:
# TODO: Add a better warning when this is happening
should_start = False
if should_start:
off_ts = None
if started_ts is None:
params.car_start()
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
# shutdown if the battery gets lower than 3%, it's discharging, we aren't running for
# more than a minute but we were running
if msg.thermal.batteryPercent < BATT_PERC_OFF and msg.thermal.batteryStatus == "Discharging" and \
started_seen and (sec_since_boot() - off_ts) > 60:
os.system('LD_LIBRARY_PATH="" svc power shutdown')
charging_disabled = check_car_battery_voltage(should_start, health, charging_disabled, msg, limitBatteryMinMax, batt_min, batt_max)
msg.thermal.chargingDisabled = charging_disabled
#BB added "and not charging_disabled" below so we don't show red LED when not charging
msg.thermal.chargingError = (current_filter.x > 0.) and (msg.thermal.batteryPercent < 90) and not charging_disabled # if current is > 1A out, then charger might be off
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
#print msg
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
