def draw_station(geom1, geom2, station, filename, length_factor=100., angle_factor=100., colors=dt_colors, dropafew=False):
if station == 4: station_template = load_svg("station4_template.svg")
else: station_template = load_svg("station_template.svg")
if station == 1: x_scale_factor = 1/6.
if station == 2: x_scale_factor = 1/7.
if station == 3: x_scale_factor = 1/8.5
if station == 4: x_scale_factor = 1/10.
y_scale_factor = 1/7.
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in station_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9mpz]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
wheel = m.group(1)
if wheel == "m2": wheel = -2
elif wheel == "m1": wheel = -1
elif wheel == "z": wheel = 0
elif wheel == "p1": wheel = 1
elif wheel == "p2": wheel = 2
sector = int(m.group(2))
xdiff = x_scale_factor * length_factor * (geom1.dt[wheel, station, sector].x - geom2.dt[wheel, station, sector].x) * signConventions["DT", wheel, station, sector][0]
ydiff = -y_scale_factor * length_factor * (geom1.dt[wheel, station, sector].y - geom2.dt[wheel, station, sector].y) * signConventions["DT", wheel, station, sector][1]
phizdiff = -angle_factor * (geom1.dt[wheel, station, sector].phiz - geom2.dt[wheel, station, sector].phiz) * signConventions["DT", wheel, station, sector][2]
sx = float(svgitem["x"]) + float(svgitem["width"])/2.
sy = float(svgitem["y"]) + float(svgitem["height"])/2.
svgitem["transform"] = "translate(%g,%g)" % (sx, sy)
svgitem["x"] = -float(svgitem["width"])/2.
svgitem["y"] = -float(svgitem["height"])/2.
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox = svgitem.clone()
newBox["transform"] = "translate(%g,%g) rotate(%g) " % (sx + xdiff, sy + ydiff, phizdiff * 180./pi)
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(wheel, station, sector)
if (not dropafew) or ((wheel, station, sector) not in [(0, 3, 6), (0, 4, 3), (0, 1, 8), (0, 2, 8), (0, 2, 9), (-1, 4, 6), (-2, 1, 8), (2, 4, 8), (2, 3, 6), (2, 1, 5), (-2, 2, 10), (-2, 3, 10), (-2, 11, 4), (1, 7, 4), (2, 2, 4), (2, 4, 4), (2, 8, 4), (2, 11, 4)]):
new_boxes.append(newBox)
else:
svgitem["style"] = "fill:none;stroke:none"
for treeindex, svgitem in station_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "stationx":
svgitem[0] = "Station %d" % station
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
station_template.save(filename)
def draw_sector(geom1, geom2, sector, filename, length_factor=100., angle_factor=100., colors=dt_colors):
if sector < 13:
sector_template = load_svg("sector_template.svg")
else:
sector_template = load_svg("sector_template_station4.svg")
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in sector_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9])_([0-9])", svgitem["id"])
if m is None: raise Exception
wheel, station = int(m.group(1))-2, int(m.group(2))
m = re.search("translate\(([0-9\.\-\+eE]+),([0-9\.\-\+eE]+)\)",svgitem["transform"])
tx = float(m.group(1))
ty = float(m.group(2))
ydiff = -length_factor * (geom2.dt[wheel, station, sector].y - geom1.dt[wheel, station, sector].y) * signConventions["DT", wheel, station, sector][1]
zdiff = -length_factor * (geom2.dt[wheel, station, sector].z - geom1.dt[wheel, station, sector].z) * signConventions["DT", wheel, station, sector][2]
phixdiff = angle_factor * (geom2.dt[wheel, station, sector].phix - geom1.dt[wheel, station, sector].phix) * signConventions["DT", wheel, station, sector][0]
newBox = svgitem.clone()
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:5.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:5.0;stroke-opacity:1;stroke-dasharray:none" % colors(wheel, station, sector)
newBox["id"] = newBox["id"] + "_moved"
newBox["transform"] = "translate(%g,%g) rotate(%g)" % (tx + ydiff, ty - zdiff, phixdiff*180./pi)
new_boxes.append(newBox)
for treeindex, svgitem in sector_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "title":
svgitem[0] = "Sector %d (length x%g, angle x%g)" % (sector,length_factor, angle_factor)
sector_template.save(filename)
def draw_wheel(geom1, geom2, wheel, filename, length_factor=100., angle_factor=100., colors=dt_colors, dropafew=False):
wheel_template = load_svg("wheel_template.svg")
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in wheel_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
station, sector = int(m.group(1)), int(m.group(2))
xdiff = -length_factor * (geom1.dt[wheel, station, sector].x - geom2.dt[wheel, station, sector].x) * signConventions["DT", wheel, station, sector][0]
zdiff = length_factor * (geom1.dt[wheel, station, sector].z - geom2.dt[wheel, station, sector].z) * signConventions["DT", wheel, station, sector][2]
phiydiff = -angle_factor * (geom1.dt[wheel, station, sector].phiy - geom2.dt[wheel, station, sector].phiy) * signConventions["DT", wheel, station, sector][1]
m = re.search("translate\(([0-9\.\-\+eE]+),\s([0-9\.\-\+eE]+)\)\srotate\(([0-9\.\-\+eE]+)\)",svgitem["transform"])
tx = float(m.group(1))
ty = float(m.group(2))
tr = float(m.group(3))
newBox = svgitem.clone()
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:5.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:5.0;stroke-opacity:1;stroke-dasharray:none" % colors(wheel, station, sector)
newBox["id"] = newBox["id"] + "_moved"
newBox["transform"] = "translate(%g,%g) rotate(%g)" % (tx - xdiff*cos(tr*pi/180.) + zdiff*sin(tr*pi/180.), ty - xdiff*sin(tr*pi/180.) - zdiff*cos(tr*pi/180.), tr - phiydiff*180./pi)
if (not dropafew) or ((wheel, station, sector) not in [(0, 3, 6), (0, 4, 3), (0, 1, 8), (0, 2, 8), (0, 2, 9), (-1, 4, 6), (-2, 1, 8), (2, 4, 8), (2, 3, 6), (2, 1, 5), (-2, 2, 10), (-2, 3, 10), (-2, 11, 4), (1, 7, 4), (2, 2, 4), (2, 4, 4), (2, 8, 4), (2, 11, 4)]):
new_boxes.append(newBox)
else:
svgitem["style"] = "fill:none;stroke:none"
for treeindex, svgitem in wheel_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "wheelx":
if wheel == 0: svgitem[0] = "Wheel 0"
else: svgitem[0] = "Wheel %+d" % wheel
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
wheel_template.save(filename)
def draw_wheel(geom1, geom2, wheel, filename, length_factor=100., angle_factor=100., colors=dt_colors, template_dir='./'):
wheel_template = load_svg(template_dir + "wheel_template.svg")
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in wheel_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
station, sector = int(m.group(1)), int(m.group(2))
xdiff = -length_factor * (geom1.dt[wheel, station, sector].x - geom2.dt[wheel, station, sector].x) * signConventions["DT", wheel, station, sector][0]
zdiff = length_factor * (geom1.dt[wheel, station, sector].z - geom2.dt[wheel, station, sector].z) * signConventions["DT", wheel, station, sector][2]
phiydiff = -angle_factor * (geom1.dt[wheel, station, sector].phiy - geom2.dt[wheel, station, sector].phiy) * signConventions["DT", wheel, station, sector][1]
m = re.search("translate\(([0-9\.\-\+eE]+),\s([0-9\.\-\+eE]+)\)\srotate\(([0-9\.\-\+eE]+)\)",svgitem["transform"])
tx = float(m.group(1))
ty = float(m.group(2))
tr = float(m.group(3))
newBox = svgitem.clone()
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:5.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:5.0;stroke-opacity:1;stroke-dasharray:none" % colors(wheel, station, sector)
newBox["id"] = newBox["id"] + "_moved"
newBox["transform"] = "translate(%g,%g) rotate(%g)" % (tx - xdiff*cos(tr*pi/180.) + zdiff*sin(tr*pi/180.), ty - xdiff*sin(tr*pi/180.) - zdiff*cos(tr*pi/180.), tr - phiydiff*180./pi)
new_boxes.append(newBox)
for treeindex, svgitem in wheel_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "wheelx":
if wheel == 0: svgitem[0] = "Wheel 0"
else: svgitem[0] = "Wheel %+d" % wheel
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
wheel_template.save(filename)
def draw_disk(geom1,
geom2,
endcap,
station,
filename,
length_factor=1.,
angle_factor=100.,
colors=csc_colors):
if station == 1: disk_template = load_svg("disk1_template.svg")
if station in (2, 3): disk_template = load_svg("disk23_template.svg")
if endcap == 1 and station == 4:
disk_template = load_svg("diskp4_template.svg")
if endcap == 2 and station == 4:
disk_template = load_svg("diskm4_template.svg")
scale_factor = 0.233
new_boxes = SVG("g")
for treeindex, svgitem in disk_template:
if isinstance(
svgitem, SVG
) and "id" in svgitem.attr and svgitem["id"] == "fakecenter":
fakecenter = pathtoPath(pathtoPath(svgitem).SVG())
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(fakecenter.d):
if di[0] in ("M", "L"):
sumx += di[1]
sumy += di[2]
sum1 += 1.
originx = sumx / sum1
originy = sumy / sum1
for treeindex, svgitem in disk_template:
if isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "ME_":
m = re.match("ME_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
ring, chamber = int(m.group(1)), int(m.group(2))
xdiff = scale_factor * length_factor * (
geom1.csc[endcap, station, ring, chamber].x -
geom2.csc[endcap, station, ring, chamber].x
) * signConventions["CSC", endcap, station, ring, chamber][0]
ydiff = -scale_factor * length_factor * (
geom1.csc[endcap, station, ring, chamber].y -
geom2.csc[endcap, station, ring, chamber].y
) * signConventions["CSC", endcap, station, ring, chamber][1]
phizdiff = -angle_factor * (
geom1.csc[endcap, station, ring, chamber].phiz -
geom2.csc[endcap, station, ring, chamber].phiz
) * signConventions["CSC", endcap, station, ring, chamber][2]
svgitem[
"style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox = pathtoPath(svgitem)
# Inkscape outputs wrong SVG: paths are filled with movetos, rather than linetos; this fixes that
first = True
for i, di in enumerate(newBox.d):
if not first and di[0] == "m":
di = list(di)
di[0] = "l"
newBox.d[i] = tuple(di)
first = False
# convert to absolute coordinates
newBox = pathtoPath(newBox.SVG())
# find the center of the object
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(newBox.d):
if di[0] == "L":
sumx += di[1]
sumy += di[2]
sum1 += 1.
centerx = sumx / sum1
centery = sumy / sum1
phipos = atan2(centery - originy, centerx - originx) - pi / 2.
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
di[1] += cos(phipos) * xdiff - sin(phipos) * ydiff
di[2] += sin(phipos) * xdiff + cos(phipos) * ydiff
newBox.d[i] = tuple(di)
centerx += cos(phipos) * xdiff - sin(phipos) * ydiff
centery += sin(phipos) * xdiff + cos(phipos) * ydiff
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
dispx = cos(phizdiff) * (
di[1] - centerx) - sin(phizdiff) * (di[2] - centery)
dispy = sin(phizdiff) * (
di[1] - centerx) + cos(phizdiff) * (di[2] - centery)
di[1] = dispx + centerx
di[2] = dispy + centery
newBox.d[i] = tuple(di)
newBox = newBox.SVG()
newBox[
"style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(
endcap, station, ring, chamber)
newBox["id"] = newBox["id"] + "_moved"
new_boxes.append(newBox)
for treeindex, svgitem in disk_template:
if isinstance(
svgitem,
SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem[
"id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"] == "diskx":
if endcap == 1: svgitem[0] = "Disk %+d" % station
else: svgitem[0] = "Disk %+d" % (-station)
svgitem[0] += " (length x%g, angle x%g)" % (length_factor,
angle_factor)
disk_template.save(filename)
def draw_disk(geom1, geom2, endcap, station, filename, length_factor=1., angle_factor=100., colors=csc_colors, template_dir='./'):
if station == 1:
disk_template = load_svg(template_dir + "disk1_template.svg")
if station in (2, 3):
disk_template = load_svg(template_dir + "disk23_template.svg")
if endcap == 1 and station == 4:
disk_template = load_svg(template_dir + "diskp4_template.svg")
if endcap == 2 and station == 4:
disk_template = load_svg(template_dir + "diskm4_template.svg")
scale_factor = 0.233
new_boxes = SVG("g")
for treeindex, svgitem in disk_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "fakecenter":
fakecenter = pathtoPath(pathtoPath(svgitem).SVG())
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(fakecenter.d):
if di[0] in ("M", "L"):
sumx += di[1]
sumy += di[2]
sum1 += 1.
originx = sumx/sum1
originy = sumy/sum1
for treeindex, svgitem in disk_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "ME_":
m = re.match("ME_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
ring, chamber = int(m.group(1)), int(m.group(2))
xdiff = scale_factor * length_factor * (geom1.csc[endcap, station, ring, chamber].x - geom2.csc[endcap, station, ring, chamber].x) * signConventions["CSC", endcap, station, ring, chamber][0]
ydiff = -scale_factor * length_factor * (geom1.csc[endcap, station, ring, chamber].y - geom2.csc[endcap, station, ring, chamber].y) * signConventions["CSC", endcap, station, ring, chamber][1]
phizdiff = -angle_factor * (geom1.csc[endcap, station, ring, chamber].phiz - geom2.csc[endcap, station, ring, chamber].phiz) * signConventions["CSC", endcap, station, ring, chamber][2]
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox = pathtoPath(svgitem)
# Inkscape outputs wrong SVG: paths are filled with movetos, rather than linetos; this fixes that
first = True
for i, di in enumerate(newBox.d):
if not first and di[0] == "m":
di = list(di)
di[0] = "l"
newBox.d[i] = tuple(di)
first = False
# convert to absolute coordinates
newBox = pathtoPath(newBox.SVG())
# find the center of the object
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(newBox.d):
if di[0] == "L":
sumx += di[1]
sumy += di[2]
sum1 += 1.
centerx = sumx/sum1
centery = sumy/sum1
phipos = atan2(centery - originy, centerx - originx) - pi/2.
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
di[1] += cos(phipos)*xdiff - sin(phipos)*ydiff
di[2] += sin(phipos)*xdiff + cos(phipos)*ydiff
newBox.d[i] = tuple(di)
centerx += cos(phipos)*xdiff - sin(phipos)*ydiff
centery += sin(phipos)*xdiff + cos(phipos)*ydiff
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
dispx = cos(phizdiff) * (di[1] - centerx) - sin(phizdiff) * (di[2] - centery)
dispy = sin(phizdiff) * (di[1] - centerx) + cos(phizdiff) * (di[2] - centery)
di[1] = dispx + centerx
di[2] = dispy + centery
newBox.d[i] = tuple(di)
newBox = newBox.SVG()
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(endcap, station, ring, chamber)
newBox["id"] = newBox["id"] + "_moved"
new_boxes.append(newBox)
for treeindex, svgitem in disk_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "diskx":
if endcap == 1: svgitem[0] = "Disk %+d" % station
else: svgitem[0] = "Disk %+d" % (-station)
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
disk_template.save(filename)
def draw_sector(geom1,
geom2,
sector,
filename,
length_factor=100.,
angle_factor=100.,
colors=dt_colors):
if sector < 13:
sector_template = load_svg("sector_template.svg")
else:
sector_template = load_svg("sector_template_station4.svg")
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in sector_template:
if isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9])_([0-9])", svgitem["id"])
if m is None: raise Exception
wheel, station = int(m.group(1)) - 2, int(m.group(2))
m = re.search("translate\(([0-9\.\-\+eE]+),([0-9\.\-\+eE]+)\)",
svgitem["transform"])
tx = float(m.group(1))
ty = float(m.group(2))
ydiff = -length_factor * (geom2.dt[wheel, station, sector].y -
geom1.dt[wheel, station, sector].y
) * signConventions["DT", wheel, station,
sector][1]
zdiff = -length_factor * (geom2.dt[wheel, station, sector].z -
geom1.dt[wheel, station, sector].z
) * signConventions["DT", wheel, station,
sector][2]
phixdiff = angle_factor * (geom2.dt[wheel, station, sector].phix -
geom1.dt[wheel, station, sector].phix
) * signConventions["DT", wheel,
station, sector][0]
newBox = svgitem.clone()
svgitem[
"style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:5.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox[
"style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:5.0;stroke-opacity:1;stroke-dasharray:none" % colors(
wheel, station, sector)
newBox["id"] = newBox["id"] + "_moved"
newBox["transform"] = "translate(%g,%g) rotate(%g)" % (
tx + ydiff, ty - zdiff, phixdiff * 180. / pi)
new_boxes.append(newBox)
for treeindex, svgitem in sector_template:
if isinstance(
svgitem,
SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem[
"id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"] == "title":
svgitem[0] = "Sector %d (length x%g, angle x%g)" % (
sector, length_factor, angle_factor)
sector_template.save(filename)
def draw_disk(geom1,
geom2,
endcap,
station,
filename,
length_factor=1.,
angle_factor=100.,
colors=csc_colors):
if station == 1: disk_template = load_svg("disk1_template.svg")
if station in (2, 3, 4): disk_template = load_svg("disk234_template.svg")
scale_factor = 0.233
new_boxes = SVG("g")
# center of the template
originx = 339.74905
originy = 513.50318
for treeindex, svgitem in disk_template:
if isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "ME_":
m = re.match("ME_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
ring, chamber = int(m.group(1)), int(m.group(2))
xdiff = scale_factor * length_factor * (
geom2.csc[endcap, station, ring, chamber].x -
geom1.csc[endcap, station, ring, chamber].x
) * signConventions["CSC", endcap, station, ring, chamber][0]
ydiff = scale_factor * length_factor * (
geom2.csc[endcap, station, ring, chamber].y -
geom1.csc[endcap, station, ring, chamber].y
) * signConventions["CSC", endcap, station, ring, chamber][1]
phizdiff = -angle_factor * (
geom2.csc[endcap, station, ring, chamber].phiz -
geom1.csc[endcap, station, ring, chamber].phiz
) * signConventions["CSC", endcap, station, ring, chamber][2]
svgitem[
"style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
# copy chamber
newBox = pathtoPath(svgitem)
# find the center of the chamber
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(newBox.d):
if di[0] == "L":
sumx += di[1]
sumy += di[2]
sum1 += 1.
centerx = sumx / sum1
centery = sumy / sum1
# global phi of the chamber
phipos = atan2(originy - centery, centerx - originx)
# global shifts of the chamber calculated from local shifts
dx = -sin(phipos) * xdiff - cos(phipos) * ydiff
dy = -cos(phipos) * xdiff + sin(phipos) * ydiff
# shift the chamber along global X and Y
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
di[1] += dx
di[2] += dy
newBox.d[i] = tuple(di)
# shift the center of the chamber along global X and Y
centerx += dx
centery += dy
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
# global shifts of the chamber calculated from local rotation
dispx = cos(phizdiff) * (
di[1] - centerx) - sin(phizdiff) * (di[2] - centery)
dispy = sin(phizdiff) * (
di[1] - centerx) + cos(phizdiff) * (di[2] - centery)
# shift the chamber along global X and Y
di[1] = dispx + centerx
di[2] = dispy + centery
newBox.d[i] = tuple(di)
newBox = newBox.SVG()
newBox[
"style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(
endcap, station, ring, chamber)
newBox["id"] = newBox["id"] + "_moved"
new_boxes.append(newBox)
for treeindex, svgitem in disk_template:
if isinstance(
svgitem,
SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem[
"id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(
svgitem,
SVG) and "id" in svgitem.attr and svgitem["id"] == "diskx":
if endcap == 1: svgitem[0] = "Disk %+d" % station
else: svgitem[0] = "Disk %+d" % (-station)
svgitem[0] += " (length x%g, angle x%g)" % (length_factor,
angle_factor)
disk_template.save(filename)
def draw_disk(geom1, geom2, endcap, station, filename, length_factor=1., angle_factor=100., colors=csc_colors):
if station == 1: disk_template = load_svg("disk1_template.svg")
if station in (2, 3, 4): disk_template = load_svg("disk234_template.svg")
scale_factor = 0.233
new_boxes = SVG("g")
# center of the template
originx = 339.74905
originy = 513.50318
for treeindex, svgitem in disk_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "ME_":
m = re.match("ME_([0-9]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
ring, chamber = int(m.group(1)), int(m.group(2))
xdiff = scale_factor * length_factor * (geom2.csc[endcap, station, ring, chamber].x - geom1.csc[endcap, station, ring, chamber].x) * signConventions["CSC", endcap, station, ring, chamber][0]
ydiff = scale_factor * length_factor * (geom2.csc[endcap, station, ring, chamber].y - geom1.csc[endcap, station, ring, chamber].y) * signConventions["CSC", endcap, station, ring, chamber][1]
phizdiff = -angle_factor * (geom2.csc[endcap, station, ring, chamber].phiz - geom1.csc[endcap, station, ring, chamber].phiz) * signConventions["CSC", endcap, station, ring, chamber][2]
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
# copy chamber
newBox = pathtoPath(svgitem)
# find the center of the chamber
sumx = 0.
sumy = 0.
sum1 = 0.
for i, di in enumerate(newBox.d):
if di[0] == "L":
sumx += di[1]
sumy += di[2]
sum1 += 1.
centerx = sumx/sum1
centery = sumy/sum1
# global phi of the chamber
phipos = atan2(originy-centery, centerx - originx)
# global shifts of the chamber calculated from local shifts
dx = -sin(phipos)*xdiff - cos(phipos)*ydiff
dy = -cos(phipos)*xdiff + sin(phipos)*ydiff
# shift the chamber along global X and Y
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
di[1] += dx
di[2] += dy
newBox.d[i] = tuple(di)
# shift the center of the chamber along global X and Y
centerx += dx
centery += dy
for i, di in enumerate(newBox.d):
if di[0] in ("M", "L"):
di = list(di)
# global shifts of the chamber calculated from local rotation
dispx = cos(phizdiff) * (di[1] - centerx) - sin(phizdiff) * (di[2] - centery)
dispy = sin(phizdiff) * (di[1] - centerx) + cos(phizdiff) * (di[2] - centery)
# shift the chamber along global X and Y
di[1] = dispx + centerx
di[2] = dispy + centery
newBox.d[i] = tuple(di)
newBox = newBox.SVG()
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(endcap, station, ring, chamber)
newBox["id"] = newBox["id"] + "_moved"
new_boxes.append(newBox)
for treeindex, svgitem in disk_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "diskx":
if endcap == 1: svgitem[0] = "Disk %+d" % station
else: svgitem[0] = "Disk %+d" % (-station)
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
disk_template.save(filename)
def draw_station(geom1, geom2, station, filename, length_factor=100., angle_factor=100., colors=dt_colors, template_dir='./'):
if station == 4:
station_template = load_svg(template_dir + "station4_template.svg")
else:
station_template = load_svg(template_dir + "station_template.svg")
if station == 1: x_scale_factor = 1/6.
if station == 2: x_scale_factor = 1/7.
if station == 3: x_scale_factor = 1/8.5
if station == 4: x_scale_factor = 1/10.
y_scale_factor = 1/7.
# make a new group to put the moved chambers into
new_boxes = SVG("g")
# loop over the SVG tree, looking for our chambers (by id)
for treeindex, svgitem in station_template:
if isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"][:3] == "MB_":
m = re.match("MB_([0-9mpz]+)_([0-9]+)", svgitem["id"])
if m is None: raise Exception
wheel = m.group(1)
if wheel == "m2": wheel = -2
elif wheel == "m1": wheel = -1
elif wheel == "z": wheel = 0
elif wheel == "p1": wheel = 1
elif wheel == "p2": wheel = 2
sector = int(m.group(2))
xdiff = x_scale_factor * length_factor * (geom1.dt[wheel, station, sector].x - geom2.dt[wheel, station, sector].x) * signConventions["DT", wheel, station, sector][0]
ydiff = -y_scale_factor * length_factor * (geom1.dt[wheel, station, sector].y - geom2.dt[wheel, station, sector].y) * signConventions["DT", wheel, station, sector][1]
phizdiff = -angle_factor * (geom1.dt[wheel, station, sector].phiz - geom2.dt[wheel, station, sector].phiz) * signConventions["DT", wheel, station, sector][2]
sx = float(svgitem["x"]) + float(svgitem["width"])/2.
sy = float(svgitem["y"]) + float(svgitem["height"])/2.
svgitem["transform"] = "translate(%g,%g)" % (sx, sy)
svgitem["x"] = -float(svgitem["width"])/2.
svgitem["y"] = -float(svgitem["height"])/2.
svgitem["style"] = "fill:#e1e1e1;fill-opacity:1;stroke:#000000;stroke-width:1.0;stroke-dasharray:1, 1;stroke-dashoffset:0"
newBox = svgitem.clone()
newBox["transform"] = "translate(%g,%g) rotate(%g) " % (sx + xdiff, sy + ydiff, phizdiff * 180./pi)
newBox["style"] = "fill:%s;fill-opacity:0.5;stroke:#000000;stroke-width:1.0;stroke-opacity:1;stroke-dasharray:none" % colors(wheel, station, sector)
new_boxes.append(newBox)
for treeindex, svgitem in station_template:
if isinstance(svgitem, SVG) and svgitem.t == "g" and "id" in svgitem.attr and svgitem["id"] == "chambers":
svgitem.append(new_boxes)
elif isinstance(svgitem, SVG) and "id" in svgitem.attr and svgitem["id"] == "stationx":
svgitem[0] = "Station %d" % station
svgitem[0] += " (length x%g, angle x%g)" % (length_factor, angle_factor)
station_template.save(filename)
