# build up package list if necessary
if self.tui.includePackages:
try:
rhnreg.sendPackages(systemId, self.tui.selectedPackages)
except up2dateErrors.CommunicationError, e:
FatalErrorWindow(
self.screen,
_("Problem sending package list:\n") + e.errmsg)
except:
log.log_exception(*sys.exc_info())
FatalErrorWindow(self.screen,
_("Problem sending package list."))
li = None
try:
li = up2dateAuth.updateLoginInfo()
except up2dateErrors.InsuffMgmntEntsError, e:
FatalErrorWindow(self.screen, e)
# Send virtualization information to the server.
rhnreg.sendVirtInfo(systemId)
# enable yum-rhn-plugin
try:
self.tui.yum_plugin_present, self.tui.yum_plugin_conf_changed = rhnreg.pluginEnable(
)
except IOError, e:
WarningWindow(
self.screen,
_("Could not open /etc/yum/pluginconf.d/rhnplugin.conf\nyum-rhn-plugin is not enabled.\n"
) + e.errmsg)
def run(self):
log.log_debug("Running %s" % self.name)
self.pwin.draw()
self.screen.refresh()
reg_info = None
try:
# reg_info dict contains: 'system_id', 'channels',
# 'failed_channels', 'slots', 'failed_slots'
log.log_debug('other is %s' % str(self.tui.other))
reg_info = rhnreg.registerSystem2(self.tui.userName, self.tui.password,
self.tui.profileName,
other = self.tui.other)
reg_info = reg_info.rawDict
if isinstance(reg_info['system_id'], unicode):
systemId = unicode.encode(reg_info['system_id'], 'utf-8')
else:
systemId = reg_info['system_id']
except up2dateErrors.CommunicationError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen,
_("Problem registering system:\n") + e.errmsg)
except up2dateErrors.RhnUuidUniquenessError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen,
_("Problem registering system:\n") + e.errmsg)
except up2dateErrors.InsuffMgmntEntsError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen,
_("Problem registering system:\n") + e.errmsg)
except up2dateErrors.RegistrationDeniedError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen,
_("Problem registering system:\n") + e.errmsg)
except up2dateErrors.ActivationKeyUsageLimitError:
FatalErrorWindow(self.screen,
ACT_KEY_USAGE_LIMIT_ERROR)
except:
log.log_exception(*sys.exc_info())
FatalErrorWindow(self.screen, _("Problem registering system."))
# write the system id out.
if not rhnreg.writeSystemId(systemId):
FatalErrorWindow(self.screen,
_("Problem writing out system id to disk."))
self.setScale(1, 4)
# include the info from the oeminfo file as well
self.oemInfo = rhnreg.getOemInfo()
self.setScale(2, 4)
# maybe upload hardware profile
if self.tui.includeHardware:
try:
rhnreg.sendHardware(systemId, self.tui.hardware)
except up2dateErrors.CommunicationError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen,
_("Problem sending hardware profile:\n") + e.errmsg)
except:
log.log_exception(*sys.exc_info())
FatalErrorWindow(self.screen,
_("Problem sending hardware profile."))
self.setScale(3, 4)
# build up package list if necessary
if self.tui.includePackages:
try:
rhnreg.sendPackages(systemId, self.tui.selectedPackages)
except up2dateErrors.CommunicationError:
e = sys.exc_info()[1]
FatalErrorWindow(self.screen, _("Problem sending package list:\n") + e.errmsg)
except:
log.log_exception(*sys.exc_info())
FatalErrorWindow(self.screen, _("Problem sending package list."))
li = None
try:
li = up2dateAuth.updateLoginInfo()
except up2dateErrors.InsuffMgmntEntsError:
FatalErrorWindow(self.screen, sys.exc_info()[1])
# Send virtualization information to the server.
rhnreg.sendVirtInfo(systemId)
# enable yum-rhn-plugin / dnf-plugin-spacewalk
try:
self.tui.pm_plugin_present, self.tui.pm_plugin_conf_changed = rhnreg.pluginEnable()
except IOError:
e = sys.exc_info()[1]
WarningWindow(self.screen, _("Could not open %s\n%s is not enabled.\n") % (PM_PLUGIN_CONF, PM_PLUGIN_NAME) + e.errmsg)
self.tui.pm_plugin_conf_error = 1
rhnreg.spawnRhnCheckForUI()
self.setScale(4, 4)
# Pop the pwin (Progress bar window)
self.screen.popWindow()
self.tui.reg_info = reg_info
return "next"
def doCall(method, *args, **kwargs):
log = up2dateLog.initLog()
log.log_debug("rpcServer: Calling XMLRPC %s" %
method.__dict__['_Method__name'])
cfg = config.initUp2dateConfig()
ret = None
attempt_count = 1
try:
attempts = int(cfg["networkRetries"])
except ValueError:
attempts = 1
if attempts <= 0:
attempts = 1
while 1:
failure = 0
ret = None
try:
ret = method(*args, **kwargs)
except KeyboardInterrupt:
raise (up2dateErrors.CommunicationError(
_("Connection aborted by the user")), None, sys.exc_info()[2])
# if we get a socket error, keep tryingx2
except (socket.error, socket.sslerror):
log.log_me("A socket error occurred: %s, attempt #%s" %
(sys.exc_info()[1], attempt_count))
if attempt_count >= attempts:
if len(e.args) > 1:
raise (up2dateErrors.CommunicationError(e.args[1]), None,
sys.exc_info()[2])
else:
raise (up2dateErrors.CommunicationError(e.args[0]), None,
sys.exc_info()[2])
else:
failure = 1
except httplib.IncompleteRead:
print "httplib.IncompleteRead"
raise (up2dateErrors.CommunicationError("httplib.IncompleteRead"),
None, sys.exc_info()[2])
except urllib2.HTTPError:
e = sys.exc_info()[1]
msg = "\nAn HTTP error occurred:\n"
msg = msg + "URL: %s\n" % e.filename
msg = msg + "Status Code: %s\n" % e.code
msg = msg + "Error Message: %s\n" % e.msg
log.log_me(msg)
raise (up2dateErrors.CommunicationError(msg), None,
sys.exc_info()[2])
except xmlrpclib.ProtocolError:
e = sys.exc_info()[1]
log.log_me("A protocol error occurred: %s , attempt #%s," %
(e.errmsg, attempt_count))
if e.errcode == 404:
log.log_me("Could not find URL, %s" % (e.url))
log.log_me("Check server name and/or URL, then retry\n")
(errCode, errMsg) = rpclib.reportError(e.headers)
reset = 0
if abs(errCode) == 34:
log.log_me("Auth token timeout occurred\n errmsg: %s" % errMsg)
# this calls login, which in tern calls doCall (ie,
# this function) but login should never get a 34, so
# should be safe from recursion
up2dateAuth.updateLoginInfo()
# the servers are being throttle to pay users only, catch the
# exceptions and display a nice error message
if abs(errCode) == 51:
log.log_me(_("Server has refused connection due to high load"))
raise (up2dateErrors.CommunicationError(e.errmsg), None,
sys.exc_info()[2])
# if we get a 404 from our server, thats pretty
# fatal... no point in retrying over and over. Note that
# errCode == 17 is specific to our servers, if the
# serverURL is just pointing somewhere random they will
# get a 0 for errcode and will raise a CommunicationError
if abs(errCode) == 17:
#in this case, the args are the package string, so lets try to
# build a useful error message
if type(args[0]) == type([]):
pkg = args[0]
else:
pkg = args[1]
if type(pkg) == type([]):
pkgName = "%s-%s-%s.%s" % (pkg[0], pkg[1], pkg[2], pkg[4])
else:
pkgName = pkg
msg = "File Not Found: %s\n%s" % (pkgName, errMsg)
log.log_me(msg)
raise (up2dateErrors.FileNotFoundError(msg), None,
sys.exc_info()[2])
if not reset:
if attempt_count >= attempts:
raise (up2dateErrors.CommunicationError(e.errmsg), None,
sys.exc_info()[2])
else:
failure = 1
except xmlrpclib.ResponseError:
raise (up2dateErrors.CommunicationError(
"Broken response from the server."), None, sys.exc_info()[2])
if ret != None:
break
else:
failure = 1
if failure:
# rest for five seconds before trying again
time.sleep(5)
attempt_count = attempt_count + 1
if attempt_count > attempts:
raise up2dateErrors.CommunicationError(
"The data returned from the server was incomplete")
return ret
self.setScale(3, 4)
# build up package list if necessary
if self.tui.includePackages:
try:
rhnreg.sendPackages(systemId, self.tui.selectedPackages)
except up2dateErrors.CommunicationError, e:
FatalErrorWindow(self.screen, _("Problem sending package list:\n") + e.errmsg)
except:
log.log_exception(*sys.exc_info())
FatalErrorWindow(self.screen, _("Problem sending package list."))
li = None
try:
li = up2dateAuth.updateLoginInfo()
except up2dateErrors.InsuffMgmntEntsError, e:
FatalErrorWindow(self.screen, e)
# Send virtualization information to the server.
rhnreg.sendVirtInfo(systemId)
# enable yum-rhn-plugin
try:
self.tui.yum_plugin_present, self.tui.yum_plugin_conf_changed = rhnreg.pluginEnable()
except IOError, e:
WarningWindow(self.screen, _("Could not open /etc/yum/pluginconf.d/rhnplugin.conf\nyum-rhn-plugin is not enabled.\n") + e.errmsg)
self.tui.yum_plugin_conf_error = 1
rhnreg.spawnRhnCheckForUI()
self.setScale(4, 4)
def doCall(method, *args, **kwargs):
log = up2dateLog.initLog()
log.log_debug("rpcServer: Calling XMLRPC %s" % method.__dict__['_Method__name'])
cfg = config.initUp2dateConfig()
ret = None
attempt_count = 1
try:
attempts = int(cfg["networkRetries"])
except ValueError:
attempts = 1
if attempts <= 0:
attempts = 1
while 1:
failure = 0
ret = None
try:
ret = method(*args, **kwargs)
except KeyboardInterrupt:
raise (up2dateErrors.CommunicationError(_(
"Connection aborted by the user")), None, sys.exc_info()[2])
# if we get a socket error, keep tryingx2
except (socket.error, socket.sslerror):
log.log_me("A socket error occurred: %s, attempt #%s" % (
sys.exc_info()[1], attempt_count))
if attempt_count >= attempts:
if len(e.args) > 1:
raise (up2dateErrors.CommunicationError(e.args[1]), None, sys.exc_info()[2])
else:
raise (up2dateErrors.CommunicationError(e.args[0]), None, sys.exc_info()[2])
else:
failure = 1
except httplib.IncompleteRead:
print "httplib.IncompleteRead"
raise (up2dateErrors.CommunicationError("httplib.IncompleteRead"), None, sys.exc_info()[2])
except urllib2.HTTPError:
e = sys.exc_info()[1]
msg = "\nAn HTTP error occurred:\n"
msg = msg + "URL: %s\n" % e.filename
msg = msg + "Status Code: %s\n" % e.code
msg = msg + "Error Message: %s\n" % e.msg
log.log_me(msg)
raise (up2dateErrors.CommunicationError(msg), None, sys.exc_info()[2])
except xmlrpclib.ProtocolError:
e = sys.exc_info()[1]
log.log_me("A protocol error occurred: %s , attempt #%s," % (
e.errmsg, attempt_count))
if e.errcode == 404:
log.log_me("Could not find URL, %s" % (e.url))
log.log_me("Check server name and/or URL, then retry\n");
(errCode, errMsg) = rpclib.reportError(e.headers)
reset = 0
if abs(errCode) == 34:
log.log_me("Auth token timeout occurred\n errmsg: %s" % errMsg)
# this calls login, which in tern calls doCall (ie,
# this function) but login should never get a 34, so
# should be safe from recursion
up2dateAuth.updateLoginInfo()
# the servers are being throttle to pay users only, catch the
# exceptions and display a nice error message
if abs(errCode) == 51:
log.log_me(_("Server has refused connection due to high load"))
raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2])
# if we get a 404 from our server, thats pretty
# fatal... no point in retrying over and over. Note that
# errCode == 17 is specific to our servers, if the
# serverURL is just pointing somewhere random they will
# get a 0 for errcode and will raise a CommunicationError
if abs(errCode) == 17:
#in this case, the args are the package string, so lets try to
# build a useful error message
if type(args[0]) == type([]):
pkg = args[0]
else:
pkg=args[1]
if type(pkg) == type([]):
pkgName = "%s-%s-%s.%s" % (pkg[0], pkg[1], pkg[2], pkg[4])
else:
pkgName = pkg
msg = "File Not Found: %s\n%s" % (pkgName, errMsg)
log.log_me(msg)
raise (up2dateErrors.FileNotFoundError(msg), None, sys.exc_info()[2])
if not reset:
if attempt_count >= attempts:
raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2])
else:
failure = 1
except xmlrpclib.ResponseError:
raise (up2dateErrors.CommunicationError(
"Broken response from the server."), None, sys.exc_info()[2])
if ret != None:
break
else:
failure = 1
if failure:
# rest for five seconds before trying again
time.sleep(5)
attempt_count = attempt_count + 1
if attempt_count > attempts:
raise up2dateErrors.CommunicationError("The data returned from the server was incomplete")
return ret
