# build up package list if necessary if self.tui.includePackages: try: rhnreg.sendPackages(systemId, self.tui.selectedPackages) except up2dateErrors.CommunicationError, e: FatalErrorWindow( self.screen, _("Problem sending package list:\n") + e.errmsg) except: log.log_exception(*sys.exc_info()) FatalErrorWindow(self.screen, _("Problem sending package list.")) li = None try: li = up2dateAuth.updateLoginInfo() except up2dateErrors.InsuffMgmntEntsError, e: FatalErrorWindow(self.screen, e) # Send virtualization information to the server. rhnreg.sendVirtInfo(systemId) # enable yum-rhn-plugin try: self.tui.yum_plugin_present, self.tui.yum_plugin_conf_changed = rhnreg.pluginEnable( ) except IOError, e: WarningWindow( self.screen, _("Could not open /etc/yum/pluginconf.d/rhnplugin.conf\nyum-rhn-plugin is not enabled.\n" ) + e.errmsg)
def run(self): log.log_debug("Running %s" % self.name) self.pwin.draw() self.screen.refresh() reg_info = None try: # reg_info dict contains: 'system_id', 'channels', # 'failed_channels', 'slots', 'failed_slots' log.log_debug('other is %s' % str(self.tui.other)) reg_info = rhnreg.registerSystem2(self.tui.userName, self.tui.password, self.tui.profileName, other = self.tui.other) reg_info = reg_info.rawDict if isinstance(reg_info['system_id'], unicode): systemId = unicode.encode(reg_info['system_id'], 'utf-8') else: systemId = reg_info['system_id'] except up2dateErrors.CommunicationError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem registering system:\n") + e.errmsg) except up2dateErrors.RhnUuidUniquenessError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem registering system:\n") + e.errmsg) except up2dateErrors.InsuffMgmntEntsError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem registering system:\n") + e.errmsg) except up2dateErrors.RegistrationDeniedError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem registering system:\n") + e.errmsg) except up2dateErrors.ActivationKeyUsageLimitError: FatalErrorWindow(self.screen, ACT_KEY_USAGE_LIMIT_ERROR) except: log.log_exception(*sys.exc_info()) FatalErrorWindow(self.screen, _("Problem registering system.")) # write the system id out. if not rhnreg.writeSystemId(systemId): FatalErrorWindow(self.screen, _("Problem writing out system id to disk.")) self.setScale(1, 4) # include the info from the oeminfo file as well self.oemInfo = rhnreg.getOemInfo() self.setScale(2, 4) # maybe upload hardware profile if self.tui.includeHardware: try: rhnreg.sendHardware(systemId, self.tui.hardware) except up2dateErrors.CommunicationError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem sending hardware profile:\n") + e.errmsg) except: log.log_exception(*sys.exc_info()) FatalErrorWindow(self.screen, _("Problem sending hardware profile.")) self.setScale(3, 4) # build up package list if necessary if self.tui.includePackages: try: rhnreg.sendPackages(systemId, self.tui.selectedPackages) except up2dateErrors.CommunicationError: e = sys.exc_info()[1] FatalErrorWindow(self.screen, _("Problem sending package list:\n") + e.errmsg) except: log.log_exception(*sys.exc_info()) FatalErrorWindow(self.screen, _("Problem sending package list.")) li = None try: li = up2dateAuth.updateLoginInfo() except up2dateErrors.InsuffMgmntEntsError: FatalErrorWindow(self.screen, sys.exc_info()[1]) # Send virtualization information to the server. rhnreg.sendVirtInfo(systemId) # enable yum-rhn-plugin / dnf-plugin-spacewalk try: self.tui.pm_plugin_present, self.tui.pm_plugin_conf_changed = rhnreg.pluginEnable() except IOError: e = sys.exc_info()[1] WarningWindow(self.screen, _("Could not open %s\n%s is not enabled.\n") % (PM_PLUGIN_CONF, PM_PLUGIN_NAME) + e.errmsg) self.tui.pm_plugin_conf_error = 1 rhnreg.spawnRhnCheckForUI() self.setScale(4, 4) # Pop the pwin (Progress bar window) self.screen.popWindow() self.tui.reg_info = reg_info return "next"
def doCall(method, *args, **kwargs): log = up2dateLog.initLog() log.log_debug("rpcServer: Calling XMLRPC %s" % method.__dict__['_Method__name']) cfg = config.initUp2dateConfig() ret = None attempt_count = 1 try: attempts = int(cfg["networkRetries"]) except ValueError: attempts = 1 if attempts <= 0: attempts = 1 while 1: failure = 0 ret = None try: ret = method(*args, **kwargs) except KeyboardInterrupt: raise (up2dateErrors.CommunicationError( _("Connection aborted by the user")), None, sys.exc_info()[2]) # if we get a socket error, keep tryingx2 except (socket.error, socket.sslerror): log.log_me("A socket error occurred: %s, attempt #%s" % (sys.exc_info()[1], attempt_count)) if attempt_count >= attempts: if len(e.args) > 1: raise (up2dateErrors.CommunicationError(e.args[1]), None, sys.exc_info()[2]) else: raise (up2dateErrors.CommunicationError(e.args[0]), None, sys.exc_info()[2]) else: failure = 1 except httplib.IncompleteRead: print "httplib.IncompleteRead" raise (up2dateErrors.CommunicationError("httplib.IncompleteRead"), None, sys.exc_info()[2]) except urllib2.HTTPError: e = sys.exc_info()[1] msg = "\nAn HTTP error occurred:\n" msg = msg + "URL: %s\n" % e.filename msg = msg + "Status Code: %s\n" % e.code msg = msg + "Error Message: %s\n" % e.msg log.log_me(msg) raise (up2dateErrors.CommunicationError(msg), None, sys.exc_info()[2]) except xmlrpclib.ProtocolError: e = sys.exc_info()[1] log.log_me("A protocol error occurred: %s , attempt #%s," % (e.errmsg, attempt_count)) if e.errcode == 404: log.log_me("Could not find URL, %s" % (e.url)) log.log_me("Check server name and/or URL, then retry\n") (errCode, errMsg) = rpclib.reportError(e.headers) reset = 0 if abs(errCode) == 34: log.log_me("Auth token timeout occurred\n errmsg: %s" % errMsg) # this calls login, which in tern calls doCall (ie, # this function) but login should never get a 34, so # should be safe from recursion up2dateAuth.updateLoginInfo() # the servers are being throttle to pay users only, catch the # exceptions and display a nice error message if abs(errCode) == 51: log.log_me(_("Server has refused connection due to high load")) raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2]) # if we get a 404 from our server, thats pretty # fatal... no point in retrying over and over. Note that # errCode == 17 is specific to our servers, if the # serverURL is just pointing somewhere random they will # get a 0 for errcode and will raise a CommunicationError if abs(errCode) == 17: #in this case, the args are the package string, so lets try to # build a useful error message if type(args[0]) == type([]): pkg = args[0] else: pkg = args[1] if type(pkg) == type([]): pkgName = "%s-%s-%s.%s" % (pkg[0], pkg[1], pkg[2], pkg[4]) else: pkgName = pkg msg = "File Not Found: %s\n%s" % (pkgName, errMsg) log.log_me(msg) raise (up2dateErrors.FileNotFoundError(msg), None, sys.exc_info()[2]) if not reset: if attempt_count >= attempts: raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2]) else: failure = 1 except xmlrpclib.ResponseError: raise (up2dateErrors.CommunicationError( "Broken response from the server."), None, sys.exc_info()[2]) if ret != None: break else: failure = 1 if failure: # rest for five seconds before trying again time.sleep(5) attempt_count = attempt_count + 1 if attempt_count > attempts: raise up2dateErrors.CommunicationError( "The data returned from the server was incomplete") return ret
self.setScale(3, 4) # build up package list if necessary if self.tui.includePackages: try: rhnreg.sendPackages(systemId, self.tui.selectedPackages) except up2dateErrors.CommunicationError, e: FatalErrorWindow(self.screen, _("Problem sending package list:\n") + e.errmsg) except: log.log_exception(*sys.exc_info()) FatalErrorWindow(self.screen, _("Problem sending package list.")) li = None try: li = up2dateAuth.updateLoginInfo() except up2dateErrors.InsuffMgmntEntsError, e: FatalErrorWindow(self.screen, e) # Send virtualization information to the server. rhnreg.sendVirtInfo(systemId) # enable yum-rhn-plugin try: self.tui.yum_plugin_present, self.tui.yum_plugin_conf_changed = rhnreg.pluginEnable() except IOError, e: WarningWindow(self.screen, _("Could not open /etc/yum/pluginconf.d/rhnplugin.conf\nyum-rhn-plugin is not enabled.\n") + e.errmsg) self.tui.yum_plugin_conf_error = 1 rhnreg.spawnRhnCheckForUI() self.setScale(4, 4)
def doCall(method, *args, **kwargs): log = up2dateLog.initLog() log.log_debug("rpcServer: Calling XMLRPC %s" % method.__dict__['_Method__name']) cfg = config.initUp2dateConfig() ret = None attempt_count = 1 try: attempts = int(cfg["networkRetries"]) except ValueError: attempts = 1 if attempts <= 0: attempts = 1 while 1: failure = 0 ret = None try: ret = method(*args, **kwargs) except KeyboardInterrupt: raise (up2dateErrors.CommunicationError(_( "Connection aborted by the user")), None, sys.exc_info()[2]) # if we get a socket error, keep tryingx2 except (socket.error, socket.sslerror): log.log_me("A socket error occurred: %s, attempt #%s" % ( sys.exc_info()[1], attempt_count)) if attempt_count >= attempts: if len(e.args) > 1: raise (up2dateErrors.CommunicationError(e.args[1]), None, sys.exc_info()[2]) else: raise (up2dateErrors.CommunicationError(e.args[0]), None, sys.exc_info()[2]) else: failure = 1 except httplib.IncompleteRead: print "httplib.IncompleteRead" raise (up2dateErrors.CommunicationError("httplib.IncompleteRead"), None, sys.exc_info()[2]) except urllib2.HTTPError: e = sys.exc_info()[1] msg = "\nAn HTTP error occurred:\n" msg = msg + "URL: %s\n" % e.filename msg = msg + "Status Code: %s\n" % e.code msg = msg + "Error Message: %s\n" % e.msg log.log_me(msg) raise (up2dateErrors.CommunicationError(msg), None, sys.exc_info()[2]) except xmlrpclib.ProtocolError: e = sys.exc_info()[1] log.log_me("A protocol error occurred: %s , attempt #%s," % ( e.errmsg, attempt_count)) if e.errcode == 404: log.log_me("Could not find URL, %s" % (e.url)) log.log_me("Check server name and/or URL, then retry\n"); (errCode, errMsg) = rpclib.reportError(e.headers) reset = 0 if abs(errCode) == 34: log.log_me("Auth token timeout occurred\n errmsg: %s" % errMsg) # this calls login, which in tern calls doCall (ie, # this function) but login should never get a 34, so # should be safe from recursion up2dateAuth.updateLoginInfo() # the servers are being throttle to pay users only, catch the # exceptions and display a nice error message if abs(errCode) == 51: log.log_me(_("Server has refused connection due to high load")) raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2]) # if we get a 404 from our server, thats pretty # fatal... no point in retrying over and over. Note that # errCode == 17 is specific to our servers, if the # serverURL is just pointing somewhere random they will # get a 0 for errcode and will raise a CommunicationError if abs(errCode) == 17: #in this case, the args are the package string, so lets try to # build a useful error message if type(args[0]) == type([]): pkg = args[0] else: pkg=args[1] if type(pkg) == type([]): pkgName = "%s-%s-%s.%s" % (pkg[0], pkg[1], pkg[2], pkg[4]) else: pkgName = pkg msg = "File Not Found: %s\n%s" % (pkgName, errMsg) log.log_me(msg) raise (up2dateErrors.FileNotFoundError(msg), None, sys.exc_info()[2]) if not reset: if attempt_count >= attempts: raise (up2dateErrors.CommunicationError(e.errmsg), None, sys.exc_info()[2]) else: failure = 1 except xmlrpclib.ResponseError: raise (up2dateErrors.CommunicationError( "Broken response from the server."), None, sys.exc_info()[2]) if ret != None: break else: failure = 1 if failure: # rest for five seconds before trying again time.sleep(5) attempt_count = attempt_count + 1 if attempt_count > attempts: raise up2dateErrors.CommunicationError("The data returned from the server was incomplete") return ret