def check_emulatorpin(params):
"""
Check emulator affinity
:params: the parameter dictionary
"""
dicts = {}
vm = params.get("vm")
vm_name = params.get("main_vm")
cpu_list = params.get("cpu_list")
cgconfig = params.get("cgconfig", "on")
options = params.get("emulatorpin_options")
result = virsh.emulatorpin(vm_name)
cmd_output = result.stdout.strip().splitlines()
logging.debug(cmd_output)
# Parsing command output and putting them into python dictionary.
for l in cmd_output[2:]:
k, v = l.split(':')
dicts[k.strip()] = v.strip()
logging.debug(dicts)
emulator_from_cmd = dicts['*']
emulatorpin_from_xml = ""
# To change a running guest with 'config' option, which will affect
# next boot, if don't shutdown the guest, we need to run virsh dumpxml
# with 'inactive' option to get guest XML changes.
if options == "config" and vm and not vm.is_alive():
emulatorpin_from_xml = \
vm_xml.VMXML().new_from_dumpxml(vm_name, "--inactive").emulatorpin
else:
emulatorpin_from_xml = \
vm_xml.VMXML().new_from_dumpxml(vm_name).emulatorpin
# To get guest corresponding emulator/cpuset.cpus value
# from cpuset controller of the cgroup.
if cgconfig == "on" and vm and vm.is_alive():
emulatorpin_from_cgroup = get_emulatorpin_from_cgroup(params)
logging.debug("The emulatorpin value from "
"cgroup: %s", emulatorpin_from_cgroup)
# To check specified cpulist value with virsh command output
# and/or cpuset.cpus from cpuset controller of the cgroup.
if cpu_list:
if vm and vm.is_alive() and options != "config":
if (cpu_list != cpus_parser(emulator_from_cmd)) or \
(cpu_list != cpus_parser(emulatorpin_from_cgroup)):
logging.error("To expect emulatorpin %s: %s",
cpu_list, emulator_from_cmd)
return False
else:
if cpu_list != cpus_parser(emulatorpin_from_xml):
logging.error("To expect emulatorpin %s: %s",
cpu_list, emulatorpin_from_xml)
return False
return True
def check_numatune_xml(params):
"""
Compare mode and nodeset value with guest XML configuration
:params: the parameter dictionary
"""
vm_name = params.get("vms")
mode = params.get("numa_mode", "")
nodeset = params.get("numa_nodeset", "")
options = params.get("options", "")
# --config option will act after vm shutdown.
if options == "config":
virsh.shutdown(vm_name)
# The verification of the numa params should
# be done when vm is running.
if not virsh.is_alive(vm_name):
virsh.start(vm_name)
numa_params = libvirt_xml.VMXML.get_numa_params(vm_name)
if not numa_params:
logging.error("Could not get numa parameters for %s", vm_name)
return False
mode_from_xml = numa_params["mode"]
# if the placement is auto, there is no nodeset in numa param.
try:
nodeset_from_xml = numa_params["nodeset"]
except KeyError():
nodeset_from_xml = ""
if mode and mode != mode_from_xml:
logging.error("To expect %s: %s", mode, mode_from_xml)
return False
# The actual nodeset value is different with guest XML configuration,
# so need to compare them via a middle result, for example, if you
# set nodeset is '0,1,2' then it will be a list '0-2' in guest XML
nodeset = cpus_parser(nodeset)
nodeset_from_xml = cpus_parser(nodeset_from_xml)
if nodeset and nodeset != nodeset_from_xml:
logging.error("To expect %s: %s", nodeset, nodeset_from_xml)
return False
return True
def check_numatune_xml(params):
"""
Compare mode and nodeset value with guest XML configuration
:params: the parameter dictionary
"""
vm_name = params.get("vms")
mode = params.get("numa_mode", "")
nodeset = params.get("numa_nodeset", "")
options = params.get("options", "")
#--config option will act after vm shutdown.
if options == "config":
virsh.shutdown(vm_name)
# The verification of the numa params should
# be done when vm is running.
if not virsh.is_alive(vm_name):
virsh.start(vm_name)
numa_params = libvirt_xml.VMXML.get_numa_params(vm_name)
if not numa_params:
logging.error("Could not get numa parameters for %s", vm_name)
return False
mode_from_xml = numa_params['mode']
# if the placement is auto, there is no nodeset in numa param.
try:
nodeset_from_xml = numa_params['nodeset']
except KeyError():
nodeset_from_xml = ""
if mode and mode != mode_from_xml:
logging.error("To expect %s: %s", mode, mode_from_xml)
return False
# The actual nodeset value is different with guest XML configuration,
# so need to compare them via a middle result, for example, if you
# set nodeset is '0,1,2' then it will be a list '0-2' in guest XML
nodeset = cpus_parser(nodeset)
nodeset_from_xml = cpus_parser(nodeset_from_xml)
if nodeset and nodeset != nodeset_from_xml:
logging.error("To expect %s: %s", nodeset, nodeset_from_xml)
return False
return True
def set_numa_parameter(params):
"""
Set the numa parameters
:params: the parameter dictionary
"""
vm_name = params.get("vms")
mode = params.get("numa_mode")
nodeset = params.get("numa_nodeset")
options = params.get("options", None)
start_vm = params.get("start_vm", "yes")
# Don't use libvirt_xml here because testing numatune command
result = virsh.numatune(vm_name, mode, nodeset, options, debug=True)
status = result.exit_status
# Check status_error
status_error = params.get("status_error", "no")
# For a running domain, the mode can't be changed, and the nodeset can
# be changed only the domain was started with a mode of 'strict'
if mode == "strict" and start_vm == "yes":
status_error = "no"
# TODO, the '--config' option will affect next boot, and if the guest
# is shutoff status, the '--current' option will be equivalent to
# '--config', if users give a specified nodeset range is more than
# host NUMA nodes, and use virsh numatune with '--config' or '--current'
# option to set the invalid nodeset to a guest with shutoff status, and
# then virsh numatune will return 0 rather than 1, because the libvirt just
# check it when starting the guest, however, the current virsh.start()
# can't meet this requirement.
if status_error == "yes":
if status:
logging.info("It's an expected error")
else:
raise error.TestFail("Unexpected return code %d" % status)
elif status_error == "no":
if status:
if len(cpus_parser(nodeset)) > num_numa_nodes():
raise error.TestNAError("Host does not support requested"
" nodeset")
else:
raise error.TestFail(result.stderr)
else:
if check_numatune_xml(params):
logging.info(result.stdout)
else:
raise error.TestFail("The 'mode' or/and 'nodeset' are"
" inconsistent with numatune XML")
def set_numa_parameter(params):
"""
Set the numa parameters
:params: the parameter dictionary
"""
vm_name = params.get("vms")
mode = params.get("numa_mode")
nodeset = params.get("numa_nodeset")
options = params.get("options", None)
start_vm = params.get("start_vm", "yes")
# Don't use libvirt_xml here because testing numatune command
result = virsh.numatune(vm_name, mode, nodeset, options, debug=True)
status = result.exit_status
# Check status_error
status_error = params.get("status_error", "no")
# For a running domain, the mode can't be changed, and the nodeset can
# be changed only the domain was started with a mode of 'strict'
if mode == "strict" and start_vm == "yes":
status_error = "no"
# TODO, the '--config' option will affect next boot, and if the guest
# is shutoff status, the '--current' option will be equivalent to
# '--config', if users give a specified nodeset range is more than
# host NUMA nodes, and use virsh numatune with '--config' or '--current'
# option to set the invalid nodeset to a guest with shutoff status, and
# then virsh numatune will return 0 rather than 1, because the libvirt just
# check it when starting the guest, however, the current virsh.start()
# can't meet this requirement.
if status_error == "yes":
if status:
logging.info("It's an expected error")
else:
raise error.TestFail("Unexpected return code %d" % status)
elif status_error == "no":
if status:
if len(cpus_parser(nodeset)) > num_numa_nodes():
raise error.TestNAError("Host does not support requested" " nodeset")
else:
raise error.TestFail(result.stderr)
else:
if check_numatune_xml(params):
logging.info(result.stdout)
else:
raise error.TestFail("The 'mode' or/and 'nodeset' are" " inconsistent with numatune XML")
def run_virsh_emulatorpin(test, params, env):
"""
Test emulatorpin tuning
1) Positive testing
1.1) get the current emulatorpin parameters for a running/shutoff guest
1.2) set the current emulatorpin parameters for a running/shutoff guest
2) Negative testing
2.1) get emulatorpin parameters for a running/shutoff guest
2.2) set emulatorpin parameters running/shutoff guest
"""
# Run test case
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
cgconfig = params.get("cgconfig", "on")
cpulist = params.get("emulatorpin_cpulist")
status_error = params.get("status_error", "no")
change_parameters = params.get("change_parameters", "no")
test_dicts = dict(params)
test_dicts['vm'] = vm
host_cpus = int(open('/proc/cpuinfo').read().count('processor'))
test_dicts['host_cpus'] = host_cpus
cpu_list = None
if cpulist:
cpu_list = cpus_parser(cpulist)
test_dicts['cpu_list'] = cpu_list
logging.debug("CPU list is %s", cpu_list)
# If the physical CPU N doesn't exist, it's an expected error
if cpu_list and max(cpu_list) > host_cpus - 1:
test_dicts["status_error"] = "yes"
# positive and negative testing #########
if status_error == "no":
if change_parameters == "no":
get_emulatorpin_parameter(test_dicts)
else:
set_emulatorpin_parameter(test_dicts)
cg = utils_cgroup.CgconfigService()
if cgconfig == "off":
if cg.cgconfig_is_running():
cg.cgconfig_stop()
if status_error == "yes":
if change_parameters == "no":
get_emulatorpin_parameter(test_dicts)
else:
set_emulatorpin_parameter(test_dicts)
# Recover cgconfig and libvirtd service
if not cg.cgconfig_is_running():
cg.cgconfig_restart()()
utils_libvirtd.service_libvirtd_control("restart")
