def CreateRoundStrutwithCone(name, diameter, start, height, coneHeight, topDiameter, frameHeight):
#print(name)
vector = XYZ(0, 0, height*-1)
coneVector = XYZ(0, 0, (coneHeight-frameHeight)*-1)
frameVector = XYZ(0, 0, frameHeight * -1)
pp = Plane.CreateByNormalAndOrigin(vector, start + coneVector + frameVector*2)
ppCone = Plane.CreateByNormalAndOrigin(vector, start + frameVector)
ppFrame = Plane.CreateByNormalAndOrigin(vector, start)
frameProfile = CurveLoop().Create([Arc.Create(ppFrame, topDiameter/2, 0, math.pi), Arc.Create(ppFrame, topDiameter/2, math.pi, math.pi*2)])
coneProfile = CurveLoop().Create([Arc.Create(ppCone, topDiameter/2 + frameHeight + 1/12, 0, math.pi), Arc.Create(ppCone, topDiameter/2 + frameHeight + 1/12, math.pi, math.pi*2)])
profile = CurveLoop().Create([Arc.Create(pp, diameter/2, 0, math.pi), Arc.Create(pp, diameter/2, math.pi, math.pi*2)])
frame = GeometryCreationUtilities.CreateExtrusionGeometry([frameProfile], frameVector, frameHeight)
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile], vector, height - coneHeight-frameHeight)
try:
cone = GeometryCreationUtilities.CreateLoftGeometry([coneProfile, profile], SolidOptions(ElementId.InvalidElementId, ElementId.InvalidElementId))
# Create Element
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo, cone, frame])
ele.SetName(name)
return ele.Id
except:
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo, frame])
ele.SetName(name)
return ele.Id
def create_widnow_for_panel(self, panel_dict, panel_params, panel=None):
"""
Создать окна в панели.
"""
for i in panel_dict['components']['componentRefs']:
window_type = self.all_windows[i["id"]]
symb = self.window_family[window_type[0]]
add_point = XYZ(i['point']['x'], i['point']['y'], i['point']['z']) / 304.8
c_window = self.doc.Create.NewFamilyInstance(
add_point,
symb,
self.default_level,
StructuralType.Column)
c_window = Precast_window(c_window, doc=self.doc, panel=panel)
c_window["Рзм.Ширина"] = i["length"] / 304.8
new_point = c_window.element.Location.Point
new_point = new_point + XYZ(i["length"] / 304.8 / 2, 0, 0)
# new_point = new_point + XYZ(i["length"] / 304.8 / 2, 0, 0)
c_window.element.Location.Point = new_point
axis = Line.CreateBound(c_window.element.Location.Point, c_window.element.Location.Point + XYZ(0,0,10))
c_window.element.Location.Rotate(axis, math.pi)
if window_type[1] == "left":
plane = Plane.CreateByNormalAndOrigin(XYZ(1,0,0), c_window.element.Location.Point)
new_win = ElementTransformUtils.MirrorElement(self.doc, c_window.element.Id, plane)
self.doc.Delete(c_window.element.Id)
def CreateCurvePipe(name, diameter, thickness, startO, endO, middleO):
#print(name)
# print("Diameter" + str(diameter))
#correction = XYZ(0, 0, diameter / 2)
correction = XYZ(0, 0, 0)
start = startO + correction
end = endO + correction
middle = middleO + correction
#print(name)
#print(start)
#print(end)
#print(middle)
path = Arc.Create(start, end, middle)
pathCurve = CurveLoop().Create([path])
pp = Plane.CreateByNormalAndOrigin(
path.ComputeDerivatives(0, True).BasisX, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2 + thickness, 0, math.pi),
Arc.Create(pp, diameter / 2 + thickness, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateSweptGeometry(
pathCurve, 0, path.GetEndParameter(0), [profile])
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
def CreateStraightPipe(name, diameter, thickness, startO, endO, length):
#correction = XYZ(0, 0, diameter/2)
#print("Diameter" + str(diameter))
#print(name)
correction = XYZ(0, 0, 0)
start = startO + correction
end = endO + correction
#print(name)
#print(length)
if (end - start).GetLength() > 0.1:
pp = Plane.CreateByNormalAndOrigin(end - start, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2 + thickness, 0, math.pi),
Arc.Create(pp, diameter / 2 + thickness, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile],
end - start,
length)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
else:
print("Duct too small")
return None
def CreateCubeStrut(csdname, csdwidth, csdlength, csdheight, csdstart,
csdrotation, scdthickness):
#print(csdname)
vector = XYZ(0, 0, csdheight * -1)
pp = Plane.CreateByNormalAndOrigin(vector, csdstart)
trans = Transform.CreateRotationAtPoint(vector, csdrotation, csdstart)
point1 = csdstart + XYZ(csdwidth / 2, csdlength / 2, 0)
point2 = csdstart + XYZ(csdwidth / 2 * -1, csdlength / 2, 0)
point3 = csdstart + XYZ(csdwidth / 2 * -1, csdlength / 2 * -1, 0)
point4 = csdstart + XYZ(csdwidth / 2, csdlength / 2 * -1, 0)
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
finalProfile = CurveLoop.CreateViaTransform(profileorigion, trans)
geo = GeometryCreationUtilities.CreateExtrusionGeometry([finalProfile],
vector, csdheight)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(csdname)
return ele.Id
def print_arc(cls, point, plane=None, radius=0.3):
doc = __revit__.ActiveUIDocument.Document
active_view = doc.ActiveView
creDoc = __revit__.ActiveUIDocument.Document.Create
if not plane:
plane = Plane.CreateByNormalAndOrigin(active_view.ViewDirection,
point)
sketchPlane = SketchPlane.Create(doc, plane)
new_arc = Arc.Create(point, radius, 0, pi * 2, plane.XVec, plane.YVec)
m_line = creDoc.NewModelCurve(new_arc, sketchPlane)
return m_line
def print_line(cls, p1, p2, plane=None, radius=0.3, color='еленая'):
doc = __revit__.ActiveUIDocument.Document
active_view = doc.ActiveView
creDoc = __revit__.ActiveUIDocument.Document.Create
if not plane:
vect = p2 - p1
p3 = p1 + XYZ_multiply(active_view.ViewDirection, vect).Normalize()
plane = Plane.CreateByThreePoints(p1, p2, p3)
sketchPlane = SketchPlane.Create(doc, plane)
new_line = Line.CreateBound(p1, p2)
m_line = creDoc.NewModelCurve(new_line, sketchPlane)
m_line.LineStyle = cls.get_line_style(color=color)
return m_line
def CreateRoundStrut(name, diameter, start, height):
vector = XYZ(0, 0, height * -1)
print(name)
print(height)
pp = Plane.CreateByNormalAndOrigin(vector, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2, 0, math.pi),
Arc.Create(pp, diameter / 2, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile], vector,
height)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
def CreateStraightPipe(name, diameter, thickness, startO, endO, length):
correction = XYZ(0, 0, diameter / 2)
start = startO + correction
end = endO + correction
print(name)
print(length)
pp = Plane.CreateByNormalAndOrigin(end - start, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2 + thickness, 0, math.pi),
Arc.Create(pp, diameter / 2 + thickness, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile],
end - start,
length)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
See this link for a copy of the GNU General Public License protecting this package.
https://github.com/eirannejad/pyRevit/blob/master/LICENSE
"""
__doc__ = 'Reorients the current 3D view camera, perpendicular to the selected face. ' \
'This tool will set a sketch plane over the selected face for 3d drawing.'
__window__.Close()
from Autodesk.Revit.DB import Transaction, View3D, SketchPlane, Plane
from Autodesk.Revit.UI.Selection import ObjectType
uidoc = __revit__.ActiveUIDocument
doc = __revit__.ActiveUIDocument.Document
selection = [doc.GetElement(elId) for elId in __revit__.ActiveUIDocument.Selection.GetElementIds()]
curview = uidoc.ActiveView
try:
ref = uidoc.Selection.PickObject(ObjectType.Face)
el = doc.GetElement(ref.ElementId)
face = el.GetGeometryObjectFromReference(ref)
if isinstance(curview, View3D):
t = Transaction(doc, 'Orient to Selected Face')
t.Start()
sp = SketchPlane.Create(doc, Plane(face.Normal, face.Origin))
curview.OrientTo(face.Normal.Negate())
uidoc.ActiveView.SketchPlane = sp
uidoc.RefreshActiveView()
t.Commit()
except:
pass
for path, c in zip(points, count):
# if c > 1: # Лучевая схема
if 2 > 1: # Ортогональная схема
sublist = []
for i, p in enumerate(path):
try:
start, end = path[i], path[i + 1]
line = Line.CreateBound(
start, end
) #https://forums.autodesk.com/t5/revit-api-forum/how-to-crete-3d-modelcurves-to-avoid-exception-curve-must-be-in/td-p/8355936
direction = line.Direction
x, y, z = direction.X, direction.Y, direction.Z
normal = XYZ(z - y, x - z, y - x)
# normal = XYZ.BasisZ.CrossProduct(line.Direction)
plane = Plane.CreateByNormalAndOrigin(normal, start)
sketchPlane = SketchPlane.Create(doc, plane)
modelCurve = doc.Create.NewModelCurve(line, sketchPlane)
# sublist.append(Line().ByStartPointEndPoint(path[i], path[i + 1]))
sublist.append(modelCurve)
except IndexError:
continue
lines.append(sublist)
else:
sublist = []
sublist.append(Line.ByStartPointEndPoint(path[0], path[-1]))
lines.append(sublist)
OUT = cirs, panels, elements, dividedWires, lengthsWithReserve, discreteLengths, naimenovanie, marka2, sposobRaschyota, kolichestvo, edinitcyIzmereniia,
# offsets = [None] + path[:-1], path, path[1:] + [None] # https://stackoverflow.com/a/56654140
offsets = path, path[1:] + [None] # https://stackoverflow.com/a/56654140
for point, next_point in list(zip(*offsets)):
if next_point:
try:
line = Line.CreateBound(point, next_point) # https://forums.autodesk.com/t5/revit-api-forum/how-to-crete-3d-modelcurves-to-avoid-exception-curve-must-be-in/td-p/8355936
except Exception:
print('{} не удалось создать линии'.format(cir.id))
continue
direction = line.Direction
x, y, z = direction.X, direction.Y, direction.Z
normal = XYZ(z - y, x - z, y - x)
# normal = XYZ.BasisZ.CrossProduct(line.Direction)
# if not normal.GetLength():
# normal = XYZ(1, 0, 0)
plane = Plane.CreateByNormalAndOrigin(normal, point)
sketchPlane = SketchPlane.Create(doc, plane)
model_line = doc.Create.NewModelCurve(line, sketchPlane)
name = get_wire_name(cir)
if '!мвс ' + name not in [i.Name for i in lineStyles]:
# print(name)
# print(cir.els[0].Id)
lineStyles.append(cats.NewSubcategory(cats.get_Item(BuiltInCategory.OST_Lines), '!мвс ' + name))
# model_line.LineStyle = [i for i in lineStyles if i.Name == '!мвс ' + name][0]
for i in lineStyles:
if i.Name == '!мвс ' + name:
try: # Срабатывает только со второго запуска скрипта. Не критично (Вероятно, можно исправить перезапуском подтранзакции)
model_line.LineStyle = i
except:
errors.add(name)
break
def project_on_plane(point, origin=None, normal=None, plane=None):
"Проекция точки на плоскость."
if plane is None:
plane = Plane.CreateByNormalAndOrigin(normal, origin)
normal = plane.Normal * plane.Project(point)[1]
return point - normal
def CreateStraightDuct(csdname, csdwidth, csdheight, thickness, csdstartO,
csdendO, csdlength):
#print(csdname)
#correction = XYZ(0, 0, csdheight / 2)
correction = XYZ(0, 0, 0)
csdstart = csdstartO + correction
csdend = csdendO + correction
if (csdend - csdstart).GetLength() > 0.1:
pp = Plane.CreateByNormalAndOrigin(csdend - csdstart, csdstart)
profile1 = Arc.Create(pp, csdwidth / 2 + thickness, 0, math.pi)
interVector = XYZ((csdend - csdstart).Y * -1, (csdend - csdstart).X, 0)
a = profile1.GetEndPoint(0)
b = profile1.GetEndPoint(1)
profile2 = Arc.Create(pp, csdheight / 2 + thickness, math.pi / 2,
math.pi * 3 / 2)
c = profile2.GetEndPoint(0)
d = profile2.GetEndPoint(1)
point1 = a + c - csdstart
point2 = b + c - csdstart
point3 = b + d - csdstart
point4 = a + d - csdstart
l1 = Line.CreateBound(point1, point2)
vector1 = point1 - point2
vector2 = XYZ((point1 - point2).X, (point1 - point2).Y, 0)
#print(vector1)
#print(vector2)
angle = vector1.AngleOnPlaneTo(interVector,
(csdend - csdstart).Normalize())
#angle = vector2.AngleTo(vector1)
#print(angle)
#print(point1)
#print(point2)
trans1 = Transform.CreateRotationAtPoint(csdend - csdstart, angle,
csdstart)
trans2 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle * (-1), csdstart)
trans3 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle * (-1) + math.pi / 2,
csdstart)
trans4 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle + math.pi / 2, csdstart)
#print(angle)
#print(angle*(-1))
#print(angle * (-1) + math.pi/2)
#print(angle + math.pi / 2)
#print(point4)
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
#print(l1.GetEndPoint(0))
#print(l1.GetEndPoint(1))
numbers = {}
list = []
l1Test1 = l1.CreateTransformed(trans1)
l1Test2 = l1.CreateTransformed(trans2)
l1Test3 = l1.CreateTransformed(trans3)
l1Test4 = l1.CreateTransformed(trans4)
numbers[abs(l1Test1.GetEndPoint(0).Z -
l1Test1.GetEndPoint(1).Z)] = trans1
numbers[abs(l1Test2.GetEndPoint(0).Z -
l1Test2.GetEndPoint(1).Z)] = trans2
numbers[abs(l1Test3.GetEndPoint(0).Z -
l1Test3.GetEndPoint(1).Z)] = trans3
numbers[abs(l1Test4.GetEndPoint(0).Z -
l1Test4.GetEndPoint(1).Z)] = trans4
list.append(abs(l1Test1.GetEndPoint(0).Z - l1Test1.GetEndPoint(1).Z))
list.append(abs(l1Test2.GetEndPoint(0).Z - l1Test2.GetEndPoint(1).Z))
list.append(abs(l1Test3.GetEndPoint(0).Z - l1Test3.GetEndPoint(1).Z))
list.append(abs(l1Test4.GetEndPoint(0).Z - l1Test4.GetEndPoint(1).Z))
list.sort()
finalProfile = CurveLoop.CreateViaTransform(profileorigion,
numbers[list[0]])
geo = GeometryCreationUtilities.CreateExtrusionGeometry(
[finalProfile], csdend - csdstart, csdlength)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(csdname)
return ele.Id
else:
print("Duct too small")
return None
def AngleAdjustment(csdend, csdstart, csdwidth, csdheight, thickness):
pp = Plane.CreateByNormalAndOrigin(csdend - csdstart, csdstart)
interVector = XYZ((csdend - csdstart).Y * -1, (csdend - csdstart).X, 0)
profile1 = Arc.Create(pp, csdwidth / 2 + thickness, 0, math.pi)
#print(pp.XVec)
#print(pp.YVec)
a = profile1.GetEndPoint(0)
b = profile1.GetEndPoint(1)
profile2 = Arc.Create(pp, csdheight / 2 + thickness, math.pi / 2,
math.pi * 3 / 2)
c = profile2.GetEndPoint(0)
d = profile2.GetEndPoint(1)
point1 = a + c - csdstart
point2 = b + c - csdstart
point3 = b + d - csdstart
point4 = a + d - csdstart
l1 = Line.CreateBound(point1, point2)
vector1 = point1 - point2
vector2 = XYZ((point1 - point2).X, (point1 - point2).Y, 0)
vector3 = point1 - point4
#print(vector1)
#print(vector2)
angle = vector1.AngleOnPlaneTo(interVector,
(csdend - csdstart).Normalize())
#print(angle)
#print(point1)
#print(point2)
trans1 = Transform.CreateRotationAtPoint(csdend - csdstart, angle, point2)
trans2 = Transform.CreateRotationAtPoint(csdend - csdstart, angle * (-1),
point2)
trans3 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle * (-1) + math.pi / 2,
point2)
trans4 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle + math.pi / 2, point2)
#print(angle)
#print(angle*(-1))
#print(angle * (-1) + math.pi/2)
#print(angle + math.pi / 2)
#print(point4)
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
#print(l1.GetEndPoint(0))
#print(l1.GetEndPoint(1))
numbers = {}
list = []
l1Test1 = l1.CreateTransformed(trans1)
l1Test2 = l1.CreateTransformed(trans2)
l1Test3 = l1.CreateTransformed(trans3)
l1Test4 = l1.CreateTransformed(trans4)
#print(l1Test1.GetEndPoint(0))
#print(l1Test1.GetEndPoint(1))
#print(l1Test2.GetEndPoint(0))
#print(l1Test2.GetEndPoint(1))
#print(l1Test3.GetEndPoint(0))
#print(l1Test3.GetEndPoint(1))
#print(l1Test4.GetEndPoint(0))
#print(l1Test4.GetEndPoint(1))
numbers[abs(l1Test1.GetEndPoint(0).Z - l1Test1.GetEndPoint(1).Z)] = trans1
numbers[abs(l1Test2.GetEndPoint(0).Z - l1Test2.GetEndPoint(1).Z)] = trans2
numbers[abs(l1Test3.GetEndPoint(0).Z - l1Test3.GetEndPoint(1).Z)] = trans3
numbers[abs(l1Test4.GetEndPoint(0).Z - l1Test4.GetEndPoint(1).Z)] = trans4
list.append(abs(l1Test1.GetEndPoint(0).Z - l1Test1.GetEndPoint(1).Z))
list.append(abs(l1Test2.GetEndPoint(0).Z - l1Test2.GetEndPoint(1).Z))
list.append(abs(l1Test3.GetEndPoint(0).Z - l1Test3.GetEndPoint(1).Z))
list.append(abs(l1Test4.GetEndPoint(0).Z - l1Test4.GetEndPoint(1).Z))
list.sort()
break
return uiview
def SignedDistanceTo(plane, p):
v = p - plane.Origin
return plane.Normal.DotProduct(v)
def project_onto(plane, p):
d = SignedDistanceTo(plane, p)
q = p - d * plane.Normal
return q
general_mark = RB_selections.pick_element_by_class(IndependentTag)
taggets = RB_selections.pick_elements_by_class(IndependentTag)
if taggets and general_mark:
plane = Plane.CreateByNormalAndOrigin(active_view.ViewDirection, active_view.Origin)
middle = project_onto(plane, general_mark.LeaderElbow)
head = project_onto(plane, general_mark.TagHeadPosition)
point = project_onto(plane, general_mark.LeaderEnd)
vect = (point - middle).Normalize()
l1 = Line.CreateUnbound(head, (middle - head).Normalize())
with Transaction(doc, "Выровнять марки") as t:
t.Start()
for i in taggets:
tag_point = project_onto(plane, i.LeaderEnd)
l2 = Line.CreateUnbound(tag_point, vect)
inter = StrongBox[IntersectionResultArray]()
l1.Intersect(l2, inter)
new_middle = list(inter.Value)[0].XYZPoint
__doc__ = 'Rotate Pipe Fittings connected to pipe'\
'Click the tool, select the pipe and then the fitting ' \
'Type in a number you want to rotate and you are good to go,'\
'Can Take negative Values'
pipFilter = PipeSelectionFilter()
fittingFilter = PipeFittingSelectionFilter()
choices = uidoc.Selection
pipeRef = choices.PickObject(ObjectType.Element, pipFilter, "Pick Pipe")
pointRef = choices.PickPoint(ObjectSnapTypes.Endpoints, "Pick End Point")
# extendRef = choices.PickObjects(ObjectType.Element, fittingFilter, "Pick Pipe Fitting")
pipe = doc.GetElement(pipeRef.ElementId)
# extend = doc.GetElement(extendRef.ElementId)
pointOne = pipe.Location.Curve.GetEndPoint(0)
pointTwo = pipe.Location.Curve.GetEndPoint(1)
line1 = pointRef.DistanceTo(pointOne)
line2 = pointRef.DistanceTo(pointTwo)
if line1 >= line2:
pointEnd = pointTwo
normal = pointTwo.Subtract(pointOne)
else:
pointEnd = pointOne
normal = pointTwo.Subtract(pointTwo)
plane = Plane.CreateByNormalAndOrigion(normal, pointEnd)
t = Transaction(doc, 'Extend Pipes')
t.Start()
t.Commit()
def CreateCurveDuct(name, width, height, thickness, startO, endO, middleO):
#correction = XYZ(0, 0, height / 2)
correction = XYZ(0, 0, 0)
#print(name)
start = startO + correction
end = endO + correction
middle = middleO + correction
ele = ()
if start.X == end.X and start.Y == end.Y and start.Z == end.Z:
print("Curve error, start is the same as end")
return None
else:
path = Arc.Create(start, end, middle)
#print(name)
#print(start)
#print(end)
#print(middle)
#print(path.Center)
pathCurve = CurveLoop().Create([path])
pp = Plane.CreateByNormalAndOrigin(
path.ComputeDerivatives(0, True).BasisX, start)
profile1 = Arc.Create(pp, width / 2 + thickness, 0, math.pi)
normalVec = path.ComputeDerivatives(0, True).BasisX
interVector = XYZ((normalVec).Y * -1, (normalVec).X, 0)
a = profile1.GetEndPoint(0)
vector1 = a - start
vector2 = XYZ((a - start).X, (a - start).Y, 0)
# angle = vector2.AngleTo(vector1)
angle = vector1.AngleOnPlaneTo(interVector, (end - start).Normalize())
#print(angle)
trans1 = Transform.CreateRotationAtPoint(
path.ComputeDerivatives(0, True).BasisX, angle, start)
trans2 = Transform.CreateRotationAtPoint(
path.ComputeDerivatives(0, True).BasisX, angle * (-1), start)
trans3 = Transform.CreateRotationAtPoint(
path.ComputeDerivatives(0, True).BasisX,
angle * (-1) + math.pi / 2, start)
trans4 = Transform.CreateRotationAtPoint(
path.ComputeDerivatives(0, True).BasisX, angle + math.pi / 2,
start)
b = profile1.GetEndPoint(1)
profile2 = Arc.Create(pp, height / 2 + thickness, math.pi / 2,
math.pi * 3 / 2)
c = profile2.GetEndPoint(0)
d = profile2.GetEndPoint(1)
point1 = a + c - start
point2 = b + c - start
point3 = b + d - start
point4 = a + d - start
numbers = {}
list = []
l1 = Line.CreateBound(point1, point2)
l1Test1 = l1.CreateTransformed(trans1)
l1Test2 = l1.CreateTransformed(trans2)
l1Test3 = l1.CreateTransformed(trans3)
l1Test4 = l1.CreateTransformed(trans4)
numbers[abs(l1Test1.GetEndPoint(0).Z -
l1Test1.GetEndPoint(1).Z)] = trans1
numbers[abs(l1Test2.GetEndPoint(0).Z -
l1Test2.GetEndPoint(1).Z)] = trans2
numbers[abs(l1Test3.GetEndPoint(0).Z -
l1Test3.GetEndPoint(1).Z)] = trans3
numbers[abs(l1Test4.GetEndPoint(0).Z -
l1Test4.GetEndPoint(1).Z)] = trans4
list.append(abs(l1Test1.GetEndPoint(0).Z - l1Test1.GetEndPoint(1).Z))
list.append(abs(l1Test2.GetEndPoint(0).Z - l1Test2.GetEndPoint(1).Z))
list.append(abs(l1Test3.GetEndPoint(0).Z - l1Test3.GetEndPoint(1).Z))
list.append(abs(l1Test4.GetEndPoint(0).Z - l1Test4.GetEndPoint(1).Z))
list.sort()
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
profile = CurveLoop.CreateViaTransform(profileorigion,
numbers[list[0]])
geo = GeometryCreationUtilities.CreateSweptGeometry(
pathCurve, 0, path.GetEndParameter(0), [profile])
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
