def loadSettings(self):
self.form.leDefaultFilePath.setText(PathPreferences.defaultFilePath())
self.form.leDefaultJobTemplate.setText(PathPreferences.defaultJobTemplate())
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags( QtCore.Qt.ItemFlag.ItemIsSelectable | QtCore.Qt.ItemFlag.ItemIsEnabled | QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(PathPreferences.defaultPostProcessorArgs())
geomTol = Units.Quantity(PathPreferences.defaultGeometryTolerance(), Units.Length)
self.form.geometryTolerance.setText(geomTol.UserString)
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy, PathPreferences.defaultOutputPolicy())
self.form.tbDefaultFilePath.clicked.connect(self.browseDefaultFilePath)
self.form.tbDefaultJobTemplate.clicked.connect(self.browseDefaultJobTemplate)
self.form.postProcessorList.itemEntered.connect(self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(self.updateDefaultPostProcessorToolTip)
self.form.tbOutputFile.clicked.connect(self.browseOutputFile)
self.loadStockSettings()
def loadSettings(self):
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags(QtCore.Qt.ItemFlag.ItemIsSelectable
| QtCore.Qt.ItemFlag.ItemIsEnabled
| QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(
PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(
PathPreferences.defaultPostProcessorArgs())
geomTol = Units.Quantity(PathPreferences.defaultGeometryTolerance(),
Units.Length)
self.form.geometryTolerance.setText(geomTol.UserString)
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy,
PathPreferences.defaultOutputPolicy())
self.form.postProcessorList.itemEntered.connect(
self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(
self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(
self.updateDefaultPostProcessorToolTip)
self.form.pbBrowseFileSystem.clicked.connect(self.browseFileSystem)
def resolveFileName(self, job):
path = PathPreferences.defaultOutputFile()
if job.PostProcessorOutputFile:
path = job.PostProcessorOutputFile
filename = path
if '%D' in filename:
D = FreeCAD.ActiveDocument.FileName
if D:
D = os.path.dirname(D)
# in case the document is in the current working directory
if not D:
D = '.'
else:
FreeCAD.Console.PrintError("Please save document in order to resolve output path!\n")
return None
filename = filename.replace('%D', D)
if '%d' in filename:
d = FreeCAD.ActiveDocument.Label
filename = filename.replace('%d', d)
if '%j' in filename:
j = job.Label
filename = filename.replace('%j', j)
if '%M' in filename:
pref = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")
M = pref.GetString("MacroPath", FreeCAD.getUserAppDataDir())
filename = filename.replace('%M', M)
policy = PathPreferences.defaultOutputPolicy()
openDialog = policy == 'Open File Dialog'
if os.path.isdir(filename) or not os.path.isdir(os.path.dirname(filename)):
# Either the entire filename resolves into a directory or the parent directory doesn't exist.
# Either way I don't know what to do - ask for help
openDialog = True
if os.path.isfile(filename) and not openDialog:
if policy == 'Open File Dialog on conflict':
openDialog = True
elif policy == 'Append Unique ID on conflict':
fn, ext = os.path.splitext(filename)
nr = fn[-3:]
n = 1
if nr.isdigit():
n = int(nr)
while os.path.isfile("%s%03d%s" % (fn, n, ext)):
n = n + 1
filename = "%s%03d%s" % (fn, n, ext)
if openDialog:
foo = QtGui.QFileDialog.getSaveFileName(QtGui.QApplication.activeWindow(), "Output File", filename)
if foo:
filename = foo[0]
else:
filename = None
return filename
def resolveFileName(self, job):
path = PathPreferences.defaultOutputFile()
if job.OutputFile:
path = job.OutputFile
filename = path
if '%D' in filename:
D = FreeCAD.ActiveDocument.FileName
if D:
D = os.path.dirname(D)
else:
FreeCAD.Console.PrintError(
"Please save document in order to resolve output path!\n")
return None
filename = filename.replace('%D', D)
if '%d' in filename:
d = FreeCAD.ActiveDocument.Label
filename = filename.replace('%d', d)
if '%j' in filename:
j = job.Label
filename = filename.replace('%j', j)
if '%M' in filename:
pref = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")
M = pref.GetString("MacroPath", FreeCAD.getUserAppDataDir())
filename = filename.replace('%M', M)
policy = PathPreferences.defaultOutputPolicy()
openDialog = policy == 'Open File Dialog'
if os.path.isdir(filename) or not os.path.isdir(
os.path.dirname(filename)):
# Either the entire filename resolves into a directory or the parent directory doesn't exist.
# Either way I don't know what to do - ask for help
openDialog = True
if os.path.isfile(filename) and not openDialog:
if policy == 'Open File Dialog on conflict':
openDialog = True
elif policy == 'Append Unique ID on conflict':
fn, ext = os.path.splitext(filename)
nr = fn[-3:]
n = 1
if nr.isdigit():
n = int(nr)
while os.path.isfile("%s%03d%s" % (fn, n, ext)):
n = n + 1
filename = "%s%03d%s" % (fn, n, ext)
if openDialog:
foo = QtGui.QFileDialog.getSaveFileName(QtGui.qApp.activeWindow(),
"Output File", filename)
if foo:
filename = foo[0]
else:
filename = None
return filename
def resolveFileName(self, job):
# print("resolveFileName(%s)" % job.Label)
path = PathPreferences.defaultOutputFile()
if job.OutputFile:
path = job.OutputFile
filename = path
if "%D" in filename:
D = FreeCAD.ActiveDocument.FileName
if D:
D = os.path.dirname(D)
else:
FreeCAD.Console.PrintError("Please save document in order to resolve output path!\n")
return None
filename = filename.replace("%D", D)
if "%d" in filename:
d = FreeCAD.ActiveDocument.Label
filename = filename.replace("%d", d)
if "%j" in filename:
j = job.Label
filename = filename.replace("%j", j)
if "%M" in filename:
pref = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")
M = pref.GetString("MacroPath", FreeCAD.getUserAppDataDir())
filename = filename.replace("%M", M)
policy = PathPreferences.defaultOutputPolicy()
openDialog = policy == "Open File Dialog"
if os.path.isdir(filename) or not os.path.isdir(os.path.dirname(filename)):
# Either the entire filename resolves into a directory or the parent directory doesn't exist.
# Either way I don't know what to do - ask for help
openDialog = True
if os.path.isfile(filename) and not openDialog:
if policy == "Open File Dialog on conflict":
openDialog = True
elif policy == "Append Unique ID on conflict":
fn, ext = os.path.splitext(filename)
nr = fn[-3:]
n = 1
if nr.isdigit():
n = int(nr)
while os.path.isfile("%s%03d%s" % (fn, n, ext)):
n = n + 1
filename = "%s%03d%s" % (fn, n, ext)
if openDialog:
foo = QtGui.QFileDialog.getSaveFileName(QtGui.qApp.activeWindow(), "Output File", filename)
if foo:
filename = foo[0]
else:
filename = None
# print("resolveFileName(%s, %s) -> '%s'" % (path, policy, filename))
return filename
def loadSettings(self):
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags( QtCore.Qt.ItemFlag.ItemIsSelectable | QtCore.Qt.ItemFlag.ItemIsEnabled | QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(PathPreferences.defaultPostProcessorArgs())
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy, PathPreferences.defaultOutputPolicy())
self.form.postProcessorList.itemEntered.connect(self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(self.updateDefaultPostProcessorToolTip)
self.form.pbBrowseFileSystem.clicked.connect(self.browseFileSystem)