def loadSettings(self):
self.form.leDefaultFilePath.setText(PathPreferences.defaultFilePath())
self.form.leDefaultJobTemplate.setText(PathPreferences.defaultJobTemplate())
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags( QtCore.Qt.ItemFlag.ItemIsSelectable | QtCore.Qt.ItemFlag.ItemIsEnabled | QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(PathPreferences.defaultPostProcessorArgs())
geomTol = Units.Quantity(PathPreferences.defaultGeometryTolerance(), Units.Length)
self.form.geometryTolerance.setText(geomTol.UserString)
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy, PathPreferences.defaultOutputPolicy())
self.form.tbDefaultFilePath.clicked.connect(self.browseDefaultFilePath)
self.form.tbDefaultJobTemplate.clicked.connect(self.browseDefaultJobTemplate)
self.form.postProcessorList.itemEntered.connect(self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(self.updateDefaultPostProcessorToolTip)
self.form.tbOutputFile.clicked.connect(self.browseOutputFile)
self.loadStockSettings()
def __init__(self, obj):
# obj.addProperty("App::PropertyFile", "PostProcessor", "CodeOutput", "Select the Post Processor file for this project")
obj.addProperty("App::PropertyFile", "OutputFile", "CodeOutput", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
obj.OutputFile = PathPreferences.defaultOutputFile()
obj.setEditorMode("OutputFile", 0) # set to default mode
obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
obj.PostProcessor = PathPreferences.allEnabledPostProcessors([''])
obj.PostProcessor = PathPreferences.defaultPostProcessor()
obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))
obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
obj.addProperty("App::PropertyString", "MachineName", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Name of the Machine that will use the CNC program"))
obj.addProperty("Path::PropertyTooltable", "Tooltable", "Base", QtCore.QT_TRANSLATE_NOOP("App::Property","The tooltable used for this CNC program"))
obj.addProperty("App::PropertyEnumeration", "MachineUnits", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Units that the machine works in, ie Metric or Inch"))
obj.MachineUnits = ['Metric', 'Inch']
obj.addProperty("App::PropertyDistance", "X_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "X_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyLink", "Base", "Base", "The base object for all operations")
obj.Proxy = self
if FreeCAD.GuiUp:
ViewProviderJob(obj.ViewObject)
def __init__(self, obj):
obj.addProperty("App::PropertyFile", "PostProcessorOutputFile", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
obj.PostProcessorOutputFile = PathPreferences.defaultOutputFile()
obj.setEditorMode("PostProcessorOutputFile", 0) # set to default mode
obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
obj.PostProcessor = postProcessors = PathPreferences.allEnabledPostProcessors()
defaultPostProcessor = PathPreferences.defaultPostProcessor()
# Check to see if default post processor hasn't been 'lost' (This can happen when Macro dir has changed)
if defaultPostProcessor in postProcessors:
obj.PostProcessor = defaultPostProcessor
else:
obj.PostProcessor = postProcessors[0]
obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))
obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
obj.addProperty("App::PropertyDistance", "GeometryTolerance", "Geometry",
QtCore.QT_TRANSLATE_NOOP("App::Property", "For computing Paths; smaller increases accuracy, but slows down computation"))
obj.GeometryTolerance = PathPreferences.defaultGeometryTolerance()
obj.addProperty("App::PropertyLink", "Base", "Base", "The base object for all operations")
obj.Proxy = self
if FreeCAD.GuiUp:
ViewProviderJob(obj.ViewObject)
def loadSettings(self):
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags(QtCore.Qt.ItemFlag.ItemIsSelectable
| QtCore.Qt.ItemFlag.ItemIsEnabled
| QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(
PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(
PathPreferences.defaultPostProcessorArgs())
geomTol = Units.Quantity(PathPreferences.defaultGeometryTolerance(),
Units.Length)
self.form.geometryTolerance.setText(geomTol.UserString)
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy,
PathPreferences.defaultOutputPolicy())
self.form.postProcessorList.itemEntered.connect(
self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(
self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(
self.updateDefaultPostProcessorToolTip)
self.form.pbBrowseFileSystem.clicked.connect(self.browseFileSystem)
def __init__(self, obj):
# obj.addProperty("App::PropertyFile", "PostProcessor", "CodeOutput", "Select the Post Processor file for this project")
obj.addProperty("App::PropertyFile", "OutputFile", "CodeOutput", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
obj.OutputFile = PathPreferences.defaultOutputFile()
obj.setEditorMode("OutputFile", 0) # set to default mode
obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
obj.PostProcessor = PathPreferences.allEnabledPostProcessors([''])
obj.PostProcessor = PathPreferences.defaultPostProcessor()
obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))
obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
obj.addProperty("App::PropertyString", "MachineName", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Name of the Machine that will use the CNC program"))
obj.addProperty("Path::PropertyTooltable", "Tooltable", "Base", QtCore.QT_TRANSLATE_NOOP("App::Property","The tooltable used for this CNC program"))
obj.addProperty("App::PropertyEnumeration", "MachineUnits", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Units that the machine works in, ie Metric or Inch"))
obj.MachineUnits = ['Metric', 'Inch']
obj.addProperty("App::PropertyDistance", "X_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "X_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyLink", "Base", "Base", "The base object for all operations")
obj.Proxy = self
if FreeCAD.GuiUp:
ViewProviderJob(obj.ViewObject)
def Activated(self):
FreeCAD.ActiveDocument.openTransaction(
translate("Path_Post", "Post Process the Selected path(s)"))
FreeCADGui.addModule("PathScripts.PathPost")
# select the Path Job that you want to post output from
selected = FreeCADGui.Selection.getCompleteSelection()
print "in activated %s" % (selected)
# try to find the job, if it's not directly selected ...
jobs = set()
for obj in selected:
if hasattr(obj, 'OutputFile') or hasattr(obj, 'PostProcessor'):
jobs.add(obj)
elif hasattr(obj, 'Path') or hasattr(obj, 'ToolNumber'):
job = PathUtils.findParentJob(obj)
if job:
jobs.add(job)
if len(jobs) != 1:
FreeCAD.Console.PrintError(
"Please select a single job or other path object\n")
FreeCAD.ActiveDocument.abortTransaction()
else:
job = jobs.pop()
print("Job for selected objects = %s" % job.Name)
# check if the user has a project and has set the default post and
# output filename
postArgs = PathPreferences.defaultPostProcessorArgs()
if hasattr(job, "PostProcessorArgs") and job.PostProcessorArgs:
postArgs = job.PostProcessorArgs
elif hasattr(job, "PostProcessor") and job.PostProcessor:
postArgs = ''
postname = self.resolvePostProcessor(job)
if postname:
filename = self.resolveFileName(job)
if postname and filename:
print("post: %s(%s, %s)" % (postname, filename, postArgs))
processor = PostProcessor.load(postname)
processor.export(selected, filename, postArgs)
FreeCAD.ActiveDocument.commitTransaction()
else:
FreeCAD.ActiveDocument.abortTransaction()
FreeCAD.ActiveDocument.recompute()
def __init__(self, obj, base, templateFile = None):
self.obj = obj
obj.addProperty("App::PropertyFile", "PostProcessorOutputFile", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))
obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
obj.addProperty("App::PropertyDistance", "GeometryTolerance", "Geometry", QtCore.QT_TRANSLATE_NOOP("App::Property", "For computing Paths; smaller increases accuracy, but slows down computation"))
obj.addProperty("App::PropertyLink", "Base", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "The base object for all operations"))
obj.addProperty("App::PropertyLink", "Stock", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Solid object to be used as stock."))
obj.addProperty("App::PropertyLink", "Operations", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Compound path of all operations in the order they are processed."))
obj.addProperty("App::PropertyLinkList", "ToolController", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Collection of tool controllers available for this job."))
obj.PostProcessorOutputFile = PathPreferences.defaultOutputFile()
#obj.setEditorMode("PostProcessorOutputFile", 0) # set to default mode
obj.PostProcessor = postProcessors = PathPreferences.allEnabledPostProcessors()
defaultPostProcessor = PathPreferences.defaultPostProcessor()
# Check to see if default post processor hasn't been 'lost' (This can happen when Macro dir has changed)
if defaultPostProcessor in postProcessors:
obj.PostProcessor = defaultPostProcessor
else:
obj.PostProcessor = postProcessors[0]
obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
obj.GeometryTolerance = PathPreferences.defaultGeometryTolerance()
ops = FreeCAD.ActiveDocument.addObject("Path::FeatureCompoundPython", "Operations")
obj.Operations = ops
obj.setEditorMode('Operations', 2) # hide
obj.setEditorMode('Placement', 2)
self.setupSetupSheet(obj)
obj.Base = createResourceClone(obj, base, 'Base', 'BaseGeometry')
obj.Proxy = self
self.setFromTemplateFile(obj, templateFile)
if not obj.Stock:
stockTemplate = PathPreferences.defaultStockTemplate()
if stockTemplate:
obj.Stock = PathStock.CreateFromTemplate(obj, json.loads(stockTemplate))
if not obj.Stock:
obj.Stock = PathStock.CreateFromBase(obj)
if obj.Stock.ViewObject:
obj.Stock.ViewObject.Visibility = False
def Activated(self):
FreeCAD.ActiveDocument.openTransaction(
translate("Path_Post", "Post Process the Selected path(s)"))
FreeCADGui.addModule("PathScripts.PathPost")
# select the Path Job that you want to post output from
selected = FreeCADGui.Selection.getCompleteSelection()
print "in activated %s" %(selected)
# try to find the job, if it's not directly selected ...
jobs = set()
for obj in selected:
if hasattr(obj, 'OutputFile') or hasattr(obj, 'PostProcessor'):
jobs.add(obj)
elif hasattr(obj, 'Path') or hasattr(obj, 'ToolNumber'):
job = PathUtils.findParentJob(obj)
if job:
jobs.add(job)
if len(jobs) != 1:
FreeCAD.Console.PrintError("Please select a single job or other path object\n")
FreeCAD.ActiveDocument.abortTransaction()
else:
job = jobs.pop()
print("Job for selected objects = %s" % job.Name)
# check if the user has a project and has set the default post and
# output filename
postArgs = PathPreferences.defaultPostProcessorArgs()
if hasattr(job, "PostProcessorArgs") and job.PostProcessorArgs:
postArgs = job.PostProcessorArgs
elif hasattr(job, "PostProcessor") and job.PostProcessor:
postArgs = ''
postname = self.resolvePostProcessor(job)
if postname:
filename = self.resolveFileName(job)
if postname and filename:
print("post: %s(%s, %s)" % (postname, filename, postArgs))
processor = PostProcessor.load(postname)
processor.export(selected, filename, postArgs)
FreeCAD.ActiveDocument.commitTransaction()
else:
FreeCAD.ActiveDocument.abortTransaction()
FreeCAD.ActiveDocument.recompute()
def __init__(self, obj):
# obj.addProperty("App::PropertyFile", "PostProcessor", "CodeOutput", "Select the Post Processor file for this project")
obj.addProperty("App::PropertyFile", "OutputFile", "CodeOutput", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
obj.OutputFile = PathPreferences.defaultOutputFile()
obj.setEditorMode("OutputFile", 0) # set to default mode
obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
obj.PostProcessor = postProcessors = PathPreferences.allEnabledPostProcessors()
defaultPostProcessor = PathPreferences.defaultPostProcessor()
# Check to see if default post processor hasn't been 'lost' (This can happen when Macro dir has changed)
if defaultPostProcessor in postProcessors:
obj.PostProcessor = defaultPostProcessor
else:
obj.PostProcessor = postProcessors[0]
obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))
obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
obj.addProperty("App::PropertyString", "MachineName", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Name of the Machine that will use the CNC program"))
#obj.addProperty("Path::PropertyTooltable", "Tooltable", "Base", QtCore.QT_TRANSLATE_NOOP("App::Property","The tooltable used for this CNC program"))
obj.addProperty("App::PropertyEnumeration", "MachineUnits", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Units that the machine works in, ie Metric or Inch"))
obj.MachineUnits = ['Metric', 'Inch']
obj.addProperty("App::PropertyDistance", "GeometryTolerance", "Geometry",
QtCore.QT_TRANSLATE_NOOP("App::Property", "For computing Paths; smaller increases accuracy, but slows down computation"))
obj.GeometryTolerance = PathPreferences.defaultGeometryTolerance()
obj.addProperty("App::PropertyDistance", "X_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Max", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Maximum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "X_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Y_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyDistance", "Z_Min", "Limits", QtCore.QT_TRANSLATE_NOOP("App::Property","The Minimum distance in X the machine can travel"))
obj.addProperty("App::PropertyLink", "Base", "Base", "The base object for all operations")
obj.Proxy = self
if FreeCAD.GuiUp:
ViewProviderJob(obj.ViewObject)
def loadSettings(self):
blacklist = PathPreferences.postProcessorBlacklist()
for processor in PathPreferences.allAvailablePostProcessors():
item = QtGui.QListWidgetItem(processor)
if processor in blacklist:
item.setCheckState(QtCore.Qt.CheckState.Unchecked)
else:
item.setCheckState(QtCore.Qt.CheckState.Checked)
item.setFlags( QtCore.Qt.ItemFlag.ItemIsSelectable | QtCore.Qt.ItemFlag.ItemIsEnabled | QtCore.Qt.ItemFlag.ItemIsUserCheckable)
self.form.postProcessorList.addItem(item)
self.verifyAndUpdateDefaultPostProcessorWith(PathPreferences.defaultPostProcessor())
self.form.defaultPostProcessorArgs.setText(PathPreferences.defaultPostProcessorArgs())
self.form.leOutputFile.setText(PathPreferences.defaultOutputFile())
self.selectComboEntry(self.form.cboOutputPolicy, PathPreferences.defaultOutputPolicy())
self.form.postProcessorList.itemEntered.connect(self.setProcessorListTooltip)
self.form.postProcessorList.itemChanged.connect(self.verifyAndUpdateDefaultPostProcessor)
self.form.defaultPostProcessor.currentIndexChanged.connect(self.updateDefaultPostProcessorToolTip)
self.form.pbBrowseFileSystem.clicked.connect(self.browseFileSystem)
def exportObjectsWith(self, objs, job, needFilename=True):
# check if the user has a project and has set the default post and
# output filename
postArgs = PathPreferences.defaultPostProcessorArgs()
if hasattr(job, "PostProcessorArgs") and job.PostProcessorArgs:
postArgs = job.PostProcessorArgs
elif hasattr(job, "PostProcessor") and job.PostProcessor:
postArgs = ''
postname = self.resolvePostProcessor(job)
filename = '-'
if postname and needFilename:
filename = self.resolveFileName(job)
if postname and filename:
print("post: %s(%s, %s)" % (postname, filename, postArgs))
processor = PostProcessor.load(postname)
gcode = processor.export(objs, filename, postArgs)
return (False, gcode)
else:
return (True, '')
def exportObjectsWith(self, objs, job, needFilename = True):
# check if the user has a project and has set the default post and
# output filename
postArgs = PathPreferences.defaultPostProcessorArgs()
if hasattr(job, "PostProcessorArgs") and job.PostProcessorArgs:
postArgs = job.PostProcessorArgs
elif hasattr(job, "PostProcessor") and job.PostProcessor:
postArgs = ''
postname = self.resolvePostProcessor(job)
filename = '-'
if postname and needFilename:
filename = self.resolveFileName(job)
if postname and filename:
print("post: %s(%s, %s)" % (postname, filename, postArgs))
processor = PostProcessor.load(postname)
gcode = processor.export(objs, filename, postArgs)
return (False, gcode)
else:
return (True, '')