class AsyncThreadController(AsyncAbstractController):
def __init__(self,
# |parent|
parent=None):
super(AsyncThreadController, self).__init__(parent)
# Create a worker and a thread it runs in. This approach was
# inspired by example given in the `QThread docs
# <http://qt-project.org/doc/qt-4.8/qthread.html>`_.
self._worker = _AsyncWorker()
self._workerThread = QThread(parent)
# Attach the worker to the thread's event queue.
self._worker.moveToThread(self._workerThread)
# Hook up signals.
self._worker.startSignal.connect(self._worker.onStart)
# Everything is ready. Start the worker thread, so it will
# be ready for functions to run.
self._workerThread.start()
# |_start|
def _start(self, future):
self._worker.startSignal.emit(future)
# |terminate|
def _terminate(self):
# Shut down the thread the Worker runs in.
self._workerThread.quit()
self._workerThread.wait()
# Finally, detach (and probably garbage collect) the objects
# used by this class.
del self._worker
del self._workerThread
class SortedListByThread(QObject):
def __init__(self):
super(SortedListByThread, self).__init__()
self.thread = self.worker = None
def run(self, lst, key, reverse):
def finished(l_sorted):
self.sortedList = l_sorted
loop.exit()
self.worker = WorkerSorted(lst, key, reverse)
self.thread = QThread(self)
loop = QEventLoop()
self.sortedList = None
self.worker.moveToThread(self.thread)
self.thread.started.connect(self.worker.run)
self.worker.finished.connect(finished)
self.thread.start()
loop.exec_()
self._finishThread()
return self.sortedList
def kill(self):
if not self.thread is None:
self._finishThread()
def _finishThread(self):
self.thread.quit()
self.thread.wait()
self.thread.deleteLater()
self.thread = self.worker = None
class SignalStream(QObject):
'''SignalStream is a file-like object that emits a text signal on writing
This class is used to provide threadsafe communication of data to the GUI.
A SignalStream can be used in place of sys.stdout and the instance's
write_signal can be connected to a slot that processes the text to where it
ought to go. Since signals and slots are threadsafe, this lets you pass
text from anywhere to anywhere reasonably safely
SignalStream uses some intelligent buffering to prevent the signalstorm that
happened the first time I used it. Signal emit only happens when flush()
is called - so an application can force a flush - but in order to make sure
that happens reasonable often SignalStream can be initialized with a QTimer
on an interval (default: 100ms) and the QTimer will make sure to call flush()
every 100ms.
'''
write_signal = pyqtSignal(str)
def __init__(self, interval_ms=100):
'''Create a SignalStream that emits text at least every interval_ms'''
super(SignalStream, self).__init__()
self.mutex = QMutex()
self.data = []
self.thread = QThread()
self.pbar_timer = QTimer()
self.pbar_timer.moveToThread(self.thread)
self.pbar_timer.setInterval(interval_ms)
self.pbar_timer.timeout.connect(self.flush)
self.thread.started.connect(self.pbar_timer.start)
self.thread.start()
def __del__(self):
self.thread.quit()
self.thread.wait()
def write(self, m):
'''Add the message in m to this stream's cache'''
locker = QMutexLocker(self.mutex)
self.data.append(m)
@pyqtSlot()
def flush(self):
'''Write all data in the stream and clear the stream's cache'''
locker = QMutexLocker(self.mutex)
if self.data:
self.write_signal.emit(''.join(self.data))
self.data = []
def set_interval(self, interval_ms):
'''Alter the pbar_timer period'''
self.pbar_timer.setInteval(interval_ms)
class TargetThread(QObject):
""" Simple QThread subclass made to support the ThreadPool interface,
this thread uses the standard python approach to threading, of passing
a callable to a Thread class.
"""
finished = pyqtSignal()
def __init__(self, target, *args, **kwargs):
""" TargetThread constructor.
:param target: callable that gets called in the new thread of execution.
:param args: var-args to pass to the target callable.
:param kwargs: keyword-args to pass to the target callable.
"""
QObject.__init__(self)
self.target = target
self.args = args
self.kwargs = kwargs
self._thread = QThread()
self.moveToThread(self._thread)
self._connect_slots()
def _connect_slots(self):
self._thread.started.connect(self.run)
def wait(self, timeout):
""" Wait a given time, in seconds, for our thread to terminate.
:param timeout: The time, in seconds, to wait.
"""
self._thread.wait(timeout)
def start(self):
""" Start our QThread instance, beginning execution of our target thread.
"""
self._thread.start()
def run(self):
""" Override of QThread run method that gets called from the new thread of execution,
this is responsible for evoking the target callable with the args and kwargs given
in the constructor. Lastly, it emits the finished signal to notify whom it may
concern that our job is done.
"""
self.target(*self.args, **self.kwargs)
self.finished.emit()
self._thread.finished.emit()
def terminate(self):
""" Terminate this thread of execution abruptly.
"""
self._thread.terminate()
class SlicerEngineManager(QObject):
'''
SlicerEngineManager is class designed for managing slicers engine and prepare parameters
'''
cancel_signal = pyqtSignal()
def __init__(self, controller):
super(SlicerEngineManager, self).__init__()
self.controller = controller
self.slice_thread = None
self.slice_engine = Slic3rEngineRunner(self.controller)
def slice(self):
self.slice_thread = QThread()
#TODO:Make it universal(for other slice engines)
self.slice_engine = Slic3rEngineRunner(self.controller)
self.slice_engine.moveToThread(self.slice_thread)
self.slice_thread.started.connect(self.slice_engine.slice)
self.slice_engine.finished.connect(self.thread_ended)
self.slice_engine.filament_info.connect(
self.controller.set_print_info_text)
self.slice_engine.step_increased.connect(
self.controller.set_progress_bar)
self.slice_engine.send_message.connect(self.controller.slicing_message)
self.slice_engine.send_gcodedata.connect(
self.controller.set_gcode_instance)
self.cancel_signal.connect(
self.slice_engine.gcode.gcode_parser.cancel_parsing)
self.slice_thread.start()
def cancel(self):
logging.debug("Thread canceling")
if self.slice_engine and self.slice_thread:
self.slice_engine.is_running = False
self.cancel_signal.emit()
self.slice_engine.kill()
self.slice_thread.quit()
self.slice_thread.wait()
self.controller.status = 'canceled'
self.controller.set_generate_button()
self.controller.set_progress_bar(0.0)
def thread_ended(self):
self.slice_thread.quit()
#TODO: add function to read gcode
self.controller.scene_was_sliced()
def get_version(self):
return self.slice_engine.get_version()
class Analyzer(object):
def __init__(self, controller):
self.controller = controller
self.analyzer_runner = AnalyzerRunner(controller)
self.analyzer_runner_thread = QThread()
self.finish_function = None
self.send_result_function = None
def make_analyze(self, finish_function, result_function):
self.finish_function = finish_function
self.send_result_function = result_function
if self.analyzer_runner.is_running:
print("cancel old analyze")
self.cancel_analyz()
print("start new analyze")
#self.analyzer_runner.whole_scene = whole_scene
self.analyzer_runner.moveToThread(self.analyzer_runner_thread)
self.analyzer_runner_thread.started.connect(self.analyzer_runner.start_analyze)
self.analyzer_runner.finished.connect(self.set_finished_read)
self.analyzer_runner.send_result.connect(self.set_result)
self.analyzer_runner.is_running = True
self.analyzer_runner_thread.start()
def cancel_analyz(self):
self.analyzer_runner.is_running = False
self.analyzer_runner_thread.quit()
self.analyzer_runner_thread.wait()
self.analyzer_runner_thread = QThread()
self.analyzer_runner = AnalyzerRunner(self.controller)
def set_finished_read(self):
print("analyze done")
if self.finish_function:
self.finish_function()
def set_result(self, result):
print(result)
if self.send_result_function:
self.send_result_function(result)
'''
class Window(QWidget):
def __init__(self, *args, **kwargs):
QWidget.__init__(self, *args, **kwargs)
self.button = QtGui.QPushButton("Run", self)
self.button.clicked.connect(self.onButton)
self.progress = QtGui.QProgressBar(self)
self.progress.setTextVisible(False)
self.layout = QtGui.QVBoxLayout()
self.layout.setContentsMargins(5, 5, 5, 5)
self.layout.addWidget(self.button)
self.layout.addWidget(self.progress)
self.layout.addStretch()
self.worker_thread = QThread()
self.worker_thread.run = run_gestures #self.worker
self.worker_thread.should_close = False
self.signals = Signals()
self.signals.update.connect(self.progress.setValue)
self.signals.enable_button.connect(self.button.setEnabled)
self.setLayout(self.layout)
self.show()
self.resize(self.size().width(), 0)
# Override
def closeEvent(self, e):
self.worker_thread.should_close = True
self.worker_thread.wait()
@pyqtSlot()
def onButton(self):
self.button.setDisabled(True)
self.worker_thread.start()
# Worker thread, no direct GUI updates!
def worker(self):
for i in range(1):
if self.worker_thread.should_close:
break
self.signals.update.emit(i)
sleep(0.1)
self.signals.enable_button.emit(True)
class SlicerEngineManager(object):
'''
SlicerEngineManager is class designed for managing slicers engine and prepare parameters
'''
def __init__(self, controller):
self.controller = controller
self.slice_thread = None
self.slice_engine = Slic3rEngineRunner(self.controller)
def slice(self):
self.slice_thread = QThread()
#TODO:Make it universal(for other slice engines)
self.slice_engine = Slic3rEngineRunner(self.controller)
self.slice_engine.moveToThread(self.slice_thread)
self.slice_thread.started.connect(self.slice_engine.slice)
self.slice_engine.finished.connect(self.thread_ended)
self.slice_engine.filament_info.connect(self.controller.set_print_info_text)
self.slice_engine.step_increased.connect(self.controller.set_progress_bar)
self.slice_engine.send_message.connect(self.controller.slicing_message)
self.slice_engine.send_gcodedata.connect(self.controller.set_gcode_instance)
self.slice_thread.start()
def cancel(self):
logging.debug("Thread canceling")
if self.slice_engine and self.slice_thread:
self.slice_engine.is_running = False
self.slice_engine.kill()
self.slice_thread.quit()
self.slice_thread.wait()
self.controller.status = 'canceled'
self.controller.set_generate_button()
self.controller.set_progress_bar(0.0)
def thread_ended(self):
self.slice_thread.quit()
#TODO: add function to read gcode
self.controller.scene_was_sliced()
def get_version(self):
return self.slice_engine.get_version()
class BisectRunner(QObject):
bisector_created = Signal(object)
running_state_changed = Signal(bool)
def __init__(self, mainwindow):
QObject.__init__(self)
self.mainwindow = mainwindow
self.bisector = None
self.thread = None
self.pending_threads = []
def bisect(self, fetch_config, options):
self.stop()
# global preferences
global_prefs = get_prefs()
# apply the global prefs now
apply_prefs(global_prefs)
self.bisector = GuiBisector(fetch_config,
persist=global_prefs['persist'])
# create a QThread, and move self.bisector in it. This will
# allow to the self.bisector slots (connected after the move)
# to be automatically called in the thread.
self.thread = QThread()
self.bisector.moveToThread(self.thread)
self.bisector.download_manager.download_progress.connect(
self.show_dl_progress)
self.bisector.test_runner.evaluate_started.connect(self.evaluate)
self.bisector.finished.connect(self.bisection_finished)
self.bisector_created.emit(self.bisector)
if options['bisect_type'] == 'nightlies':
handler = NightlyHandler(find_fix=options['find_fix'])
good = options['good_date']
bad = options['bad_date']
else:
handler = InboundHandler(find_fix=options['find_fix'])
good = options['good_changeset']
bad = options['bad_changeset']
# options for the app launcher
launcher_kwargs = {}
for name in ('profile', 'preferences'):
if name in options:
value = options[name]
if value:
launcher_kwargs[name] = value
self.bisector.test_runner.launcher_kwargs = launcher_kwargs
self.thread.start()
self.bisector._bisect_args = (handler, good, bad)
# this will be called in the worker thread.
QTimer.singleShot(0, self.bisector.bisect)
self.running_state_changed.emit(True)
@Slot()
def stop(self, wait=True):
if self.bisector:
self.bisector.finished.disconnect(self.bisection_finished)
self.bisector.download_manager.cancel()
self.bisector = None
if self.thread:
self.thread.quit()
if wait:
# wait for thread(s) completion - this is the case when
# user close the application
self.thread.wait()
for thread in self.pending_threads:
thread.wait()
else:
# do not block, just keep track of the thread - we got here
# when user cancel the bisection with the button.
self.pending_threads.append(self.thread)
self.thread.finished.connect(self._remove_pending_thread)
self.thread = None
self.running_state_changed.emit(False)
@Slot()
def _remove_pending_thread(self):
for thread in self.pending_threads[:]:
if thread.isFinished():
self.pending_threads.remove(thread)
@Slot(object, int, int)
def show_dl_progress(self, dl, current, total):
message = "downloading %s: %d/%d" % (dl.get_dest(), current, total)
self.mainwindow.ui.statusbar.showMessage(message, 2000)
@Slot()
def evaluate(self):
verdict = get_verdict(self.mainwindow)
self.bisector.test_runner.finish(verdict)
@Slot(object, int)
def bisection_finished(self, bisection, resultcode):
if resultcode == Bisection.USER_EXIT:
msg = "Bisection stopped."
dialog = QMessageBox.information
elif resultcode == Bisection.NO_DATA:
msg = "Unable to find enough data to bisect."
dialog = QMessageBox.warning
elif resultcode == Bisection.EXCEPTION:
msg = "Error: %s" % self.bisector.error[1]
dialog = QMessageBox.critical
else:
if bisection.fetch_config.can_go_inbound() and \
isinstance(bisection.handler, NightlyHandler):
# we can go on inbound, let's ask the user
if QMessageBox.question(
self.mainwindow, "End of the bisection",
"Nightly bisection is done, but you can continue the"
" bisection on inbound builds. Contibue with inbounds ?",
QMessageBox.Yes | QMessageBox.No,
QMessageBox.Yes) == QMessageBox.Yes:
# let's go on inbound
QTimer.singleShot(0, self.bisector.nightlies_to_inbound)
else:
# no inbound, bisection is done.
self.stop()
return
msg = "The bisection is done."
dialog = QMessageBox.information
dialog(self.mainwindow, "End of the bisection", msg)
self.stop()
class Gui(QtGui.QMainWindow,QtGui.QWidget):
def __init__(self):
super(Gui, self).__init__()
self.speaker = ""
self.directory = ""
self.type = ""
self.line=0
self.text=[]
self.decode=""
self.fname="output"
self.rec=0
self.initUI()
self.file = ""
def initUI(self):
self.setWindowIcon(QtGui.QIcon('logo.png'))
self.vr = VoiceRec()
self.pl = Play()
self.vrThread = QThread()
self.plThread = QThread()
self.vr.moveToThread(self.vrThread)
self.pl.moveToThread(self.plThread)
self.figure = plt.figure(1)
self.canvas = FigureCanvas(self.figure)
self.toolbar = NavigationToolbar(self.canvas, self)
self.centralwidget = QtGui.QWidget(self)
self.verticalLayout = QtGui.QVBoxLayout(self.centralwidget)
self.verticalLayout.addWidget(self.toolbar)
self.verticalLayout.addWidget(self.canvas)
self.centralwidget.setGeometry(10,10,825,330)
openFile = QtGui.QAction(QtGui.QIcon('open.png'), '&Open', self)
openFile.setShortcut('Ctrl+O')
openFile.setStatusTip('Open new File')
openFile.triggered.connect(self.showDialogOpen)
chUser = QtGui.QAction('&Change Speaker', self)
chUser.setStatusTip('Change Speaker')
chUser.triggered.connect(self.changeUser)
exitAction = QtGui.QAction(QtGui.QIcon('exit.png'), '&Exit', self)
exitAction.setShortcut('Ctrl+Q')
exitAction.setStatusTip('Exit application')
exitAction.triggered.connect(self.closeEvent)
utf_8 = QtGui.QAction('&UTF-8', self)
utf_8.setStatusTip('utf-8')
utf_8.triggered.connect(self.encodeUTF8)
utf_16 = QtGui.QAction('&UTF-16', self)
utf_16.setStatusTip('utf-16')
utf_16.triggered.connect(self.encodeUTF16)
Ascii = QtGui.QAction('&ASCII', self)
Ascii.setStatusTip('ascii')
Ascii.triggered.connect(self.encodeASCII)
about = QtGui.QAction('&About', self)
about.setStatusTip('More About Voice Recorder')
about.triggered.connect(self.showAbout)
self.textEdit = QtGui.QTextEdit(self)
self.textEdit.setGeometry(10,360,825,104)
self.textEdit.setStyleSheet("QTextEdit {font-size: 14pt}")
self.textEdit.setText("Please Open a File...")
self.textEdit.setReadOnly(True)
self.Open = QtGui.QPushButton('Open', self)
self.Open.move(10,480)
self.Open.clicked.connect(self.showDialogOpen)
self.Record = QtGui.QPushButton('Record', self)
self.Record.move(155,480)
self.Record.setEnabled(False)
self.Record.clicked.connect(self.record)
self.Stop = QtGui.QPushButton('Stop', self)
self.Stop.move(300,480)
self.Stop.setEnabled(False)
self.Stop.clicked.connect(self.stop)
self.Play = QtGui.QPushButton('Play', self)
self.Play.move(445,480)
self.Play.setEnabled(False)
self.Play.clicked.connect(self.play)
self.Back = QtGui.QPushButton('Back', self)
self.Back.move(590,480)
self.Back.setEnabled(False)
self.Back.clicked.connect(self.showBack)
self.Next = QtGui.QPushButton('Next', self)
self.Next.move(735,480)
self.Next.setEnabled(False)
self.Next.clicked.connect(self.showNext)
menubar = self.menuBar()
fileMenu = menubar.addMenu('&File')
fileMenu.addAction(openFile)
fileMenu.addAction(chUser)
fileMenu.addAction(exitAction)
encodeMenu = menubar.addMenu('&Encoding')
encodeMenu.addAction(Ascii)
encodeMenu.addAction(utf_8)
encodeMenu.addAction(utf_16)
helpMenu = menubar.addMenu('&Help')
helpMenu.addAction(about)
self.setGeometry(200,200, 845, 550)
self.setFixedSize(845 , 550)
self.setWindowTitle('Akshar Voice Recorder')
self.user = User(self)
def showDialogOpen(self):
plt.clf()
self.canvas.draw()
self.statusBar().showMessage('Open a File')
self.fname = QtGui.QFileDialog.getOpenFileName(self, 'Open file')
if(self.fname!=""):
self.Record.setEnabled(True)
self.Play.setEnabled(True)
self.Next.setEnabled(True)
self.Back.setEnabled(True)
self.directory=str(self.file)+"/"+str(self.speaker)+"_"+str(self.type)+"_"+str(self.fname).split("/")[-1]
if not os.path.exists(self.directory):
os.makedirs(self.directory)
del self.text[:]
f = open(self.fname, 'r')
for lines in f:
self.text.append(lines)
f.close
if(self.decode!=""):
self.textEdit.setText(self.text[self.line].decode(self.decode))
else:
self.textEdit.setText(self.text[self.line].decode('ascii'))
self.line=0
else:
self.Record.setEnabled(False)
self.Play.setEnabled(False)
self.Next.setEnabled(False)
self.Back.setEnabled(False)
self.statusBar().showMessage('')
def showNext(self):
plt.clf()
self.canvas.draw()
self.line+=1
if(len(self.text)>self.line):
if(self.decode!=""):
self.textEdit.setText(self.text[self.line].decode(self.decode))
else:
self.textEdit.setText(self.text[self.line].decode('utf-8'))
else:
self.showDialogOpen()
def showBack(self):
plt.clf()
self.canvas.draw()
self.line-=1
if(len(self.text)>=self.line and self.line>=0):
if(self.decode!=""):
self.textEdit.setText(self.text[self.line].decode(self.decode))
else:
self.textEdit.setText(self.text[self.line].decode('utf-8'))
else:
self.showDialogOpen()
def showAbout(self):
self.popup1=About()
self.popup1.exec_()
def encodeUTF8(self):
self.decode="utf-8"
def encodeUTF16(self):
self.decode="utf-16"
def encodeASCII(self):
self.decode="ascii"
def changeUser(self):
self.user.__init__(self)
def record(self):
plt.clf()
self.canvas.draw()
self.statusBar().showMessage('Recording')
self.rec=1
self.Record.setEnabled(False)
self.Stop.setEnabled(True)
self.Open.setEnabled(False)
self.Play.setEnabled(False)
self.Next.setEnabled(False)
self.Back.setEnabled(False)
self.vrThread.start()
self.vr.record(self.directory, self.text[self.line].split(")")[0], self)
def stop(self):
self.statusBar().showMessage('')
if self.rec == 1:
self.vr.stop()
self.vrThread.exit()
self.vrThread.wait()
self.vrThread.quit()
elif self.rec == 2:
self.pl.stop()
self.plThread.exit()
self.plThread.wait()
self.plThread.quit()
self.Record.setEnabled(True)
self.Open.setEnabled(True)
self.Play.setEnabled(True)
self.Next.setEnabled(True)
self.Back.setEnabled(True)
self.rec=0
def play(self):
self.statusBar().showMessage('Playing')
self.rec=2
self.Record.setEnabled(False)
self.Stop.setEnabled(True)
self.Open.setEnabled(False)
self.Play.setEnabled(False)
self.Next.setEnabled(False)
self.Back.setEnabled(False)
self.plThread.start()
self.pl.play(self.text[self.line].split(")")[0], self)
class BisectRunner(QObject):
bisector_created = Signal(object)
running_state_changed = Signal(bool)
def __init__(self, mainwindow):
QObject.__init__(self)
self.mainwindow = mainwindow
self.bisector = None
self.thread = None
self.pending_threads = []
def bisect(self, fetch_config, options):
self.stop()
# global preferences
global_prefs = get_prefs()
# apply the global prefs now
apply_prefs(global_prefs)
download_dir = global_prefs['persist']
persist_limit = int(abs(global_prefs['persist_size_limit'])
* 1073741824)
if not download_dir:
download_dir = self.mainwindow.persist
self.bisector = GuiBisector(fetch_config,
download_dir, persist_limit)
# create a QThread, and move self.bisector in it. This will
# allow to the self.bisector slots (connected after the move)
# to be automatically called in the thread.
self.thread = QThread()
self.bisector.moveToThread(self.thread)
self.bisector.test_runner.evaluate_started.connect(
self.evaluate)
self.bisector.finished.connect(self.bisection_finished)
self.bisector.choose_next_build.connect(self.choose_next_build)
self.bisector_created.emit(self.bisector)
if options['bisect_type'] == 'nightlies':
handler = NightlyHandler(find_fix=options['find_fix'])
good = options['good_date']
bad = options['bad_date']
else:
handler = InboundHandler(find_fix=options['find_fix'])
good = options['good_changeset']
bad = options['bad_changeset']
# options for the app launcher
launcher_kwargs = {}
for name in ('profile', 'preferences'):
if name in options:
value = options[name]
if value:
launcher_kwargs[name] = value
# add add-ons paths to the app launcher
launcher_kwargs['addons'] = options['addons']
self.bisector.test_runner.launcher_kwargs = launcher_kwargs
self.thread.start()
self.bisector._bisect_args = (handler, good, bad)
# this will be called in the worker thread.
QTimer.singleShot(0, self.bisector.bisect)
self.running_state_changed.emit(True)
@Slot()
def stop(self, wait=True):
if self.bisector:
self.bisector.finished.disconnect(self.bisection_finished)
self.bisector.download_manager.cancel()
self.bisector = None
if self.thread:
self.thread.quit()
if wait:
# wait for thread(s) completion - this is the case when
# user close the application
self.thread.wait()
for thread in self.pending_threads:
thread.wait()
else:
# do not block, just keep track of the thread - we got here
# when user cancel the bisection with the button.
self.pending_threads.append(self.thread)
self.thread.finished.connect(self._remove_pending_thread)
self.thread = None
self.running_state_changed.emit(False)
@Slot()
def _remove_pending_thread(self):
for thread in self.pending_threads[:]:
if thread.isFinished():
self.pending_threads.remove(thread)
@Slot(str)
def evaluate(self, err_message):
if not err_message:
verdict = get_verdict(self.mainwindow)
else:
QMessageBox.warning(
self.mainwindow,
"Launcher Error",
("An error occured while starting the process, so the build"
" will be skipped. Error message:<br><strong>%s</strong>"
% err_message)
)
verdict = 's'
self.bisector.test_runner.finish(verdict)
@Slot()
def choose_next_build(self):
dlg = SkipDialog(self.bisector.bisection.build_range)
self.bisector._next_build_index = dlg.choose_next_build()
QTimer.singleShot(0, self.bisector._bisect_next)
@Slot(object, int)
def bisection_finished(self, bisection, resultcode):
if resultcode == Bisection.USER_EXIT:
msg = "Bisection stopped."
dialog = QMessageBox.information
elif resultcode == Bisection.NO_DATA:
msg = "Unable to find enough data to bisect."
dialog = QMessageBox.warning
elif resultcode == Bisection.EXCEPTION:
msg = "Error: %s" % self.bisector.error[1]
dialog = QMessageBox.critical
else:
if self.bisector.fetch_config.can_go_inbound() and \
isinstance(bisection.handler, NightlyHandler):
# we can go on inbound, let's ask the user
if QMessageBox.question(
self.mainwindow,
"End of the bisection",
"Nightly bisection is done, but you can continue the"
" bisection on inbound builds. Continue with inbounds ?",
QMessageBox.Yes | QMessageBox.No,
QMessageBox.Yes
) == QMessageBox.Yes:
# let's go on inbound
QTimer.singleShot(0, self.bisector.nightlies_to_inbound)
else:
# no inbound, bisection is done.
self.stop()
return
msg = "The bisection is done."
dialog = QMessageBox.information
dialog(self.mainwindow, "End of the bisection", msg)
self.stop()
class XdkWindow(QMainWindow):
""" """
loadFileRequested = Signal(str)
def __init__( self, parent = None ):
super(XdkWindow, self).__init__( parent )
# load the user interface
projexui.loadUi(__file__, self)
# define custom properties
self._currentContentsIndex = -1
self._worker = XdkWorker()
self._workerThread = QThread()
self._worker.moveToThread(self._workerThread)
self._workerThread.start()
# set default properties
self.setAcceptDrops(True)
self.setAttribute( Qt.WA_DeleteOnClose )
self.uiFindNextBTN.setDefaultAction(self.uiFindNextACT)
self.uiFindPrevBTN.setDefaultAction(self.uiFindPrevACT)
self.uiFindWIDGET.setVisible(False)
self.uiSearchWEB.page().setLinkDelegationPolicy(
QWebPage.DelegateAllLinks)
self.refreshUi()
# connect widgets
self.uiContentsTAB.currentChanged.connect(self.refreshUi)
self.uiContentsTAB.tabCloseRequested.connect(self.closeContentsWidget)
self.uiContentsTREE.itemExpanded.connect(self.loadItem)
self.uiContentsTREE.itemSelectionChanged.connect(self.refreshContents)
self.uiSearchTXT.returnPressed.connect(self.search)
self.uiSearchWEB.linkClicked.connect(self.gotoUrl)
self.uiIndexTREE.itemSelectionChanged.connect(self.refreshFromIndex)
# connect find actions
self.uiBackACT.triggered.connect(self.goBack)
self.uiForwardACT.triggered.connect(self.goForward)
self.uiHomeACT.triggered.connect(self.goHome )
self.uiFindTXT.textChanged.connect( self.findNext )
self.uiFindTXT.returnPressed.connect( self.findNext )
self.uiFindNextACT.triggered.connect( self.findNext )
self.uiFindPrevACT.triggered.connect( self.findPrev )
self.uiFindACT.triggered.connect(self.showFind)
self.uiFindCloseBTN.clicked.connect(self.uiFindWIDGET.hide)
self.uiCopyTextACT.triggered.connect( self.copyText )
# connect zoom actions
self.uiZoomResetACT.triggered.connect( self.zoomReset )
self.uiZoomInACT.triggered.connect( self.zoomIn )
self.uiZoomOutACT.triggered.connect( self.zoomOut )
# connect file actions
self.uiLoadACT.triggered.connect( self.loadFilename )
self.uiNewTabACT.triggered.connect( self.addContentsWidget )
self.uiCloseTabACT.triggered.connect( self.closeContentsWidget )
self.uiQuitACT.triggered.connect( self.close )
# connect the signals
self.loadFileRequested.connect(self._worker.loadFile)
self._worker.loadingFinished.connect(self.__addXdkItem)
QApplication.instance().aboutToQuit.connect(self.__cleanupWorker)
def __del__(self):
self.__cleanupWorker()
def __addXdkItem(self, filename):
item = XdkItem(filename)
# add the xdk content item
self.uiContentsTREE.addTopLevelItem(item)
# add the index list items
self.uiIndexTREE.blockSignals(True)
self.uiIndexTREE.setUpdatesEnabled(False)
for name, url in item.indexlist():
item = XTreeWidgetItem([name])
item.setToolTip(0, url)
item.setFixedHeight(22)
self.uiIndexTREE.addTopLevelItem(item)
self.uiIndexTREE.blockSignals(False)
self.uiIndexTREE.setUpdatesEnabled(True)
self.uiIndexTREE.sortByColumn(0, Qt.AscendingOrder)
self.unsetCursor()
def __cleanupWorker(self):
if self._workerThread is None:
return
self._workerThread.quit()
self._workerThread.wait()
self._worker.deleteLater()
self._workerThread.deleteLater()
self._worker = None
self._workerThread = None
def __gotoUrl(self, url):
if url.toLocalFile():
self.gotoUrl(url.toString())
else:
webbrowser.open(str(url.toString()))
def addContentsWidget( self ):
"""
Adds a new contents widget tab into the contents tab.
:return <QWebView>
"""
curr_widget = self.currentContentsWidget()
widget = QWebView(self)
page = widget.page()
page.setLinkDelegationPolicy(page.DelegateAllLinks)
self.uiContentsTAB.blockSignals(True)
self.uiContentsTAB.addTab(widget, 'Documentation')
self.uiContentsTAB.setCurrentIndex(self.uiContentsTAB.count() - 1)
self.uiContentsTAB.blockSignals(False)
self._currentContentsIndex = self.uiContentsTAB.count() - 1
if curr_widget:
widget.setUrl(curr_widget.url())
widget.titleChanged.connect(self.refreshUi)
widget.linkClicked.connect(self.__gotoUrl)
return widget
def closeContentsWidget( self ):
"""
Closes the current contents widget.
"""
widget = self.currentContentsWidget()
if ( not widget ):
return
widget.close()
widget.setParent(None)
widget.deleteLater()
def copyText( self ):
"""
Copies the selected text to the clipboard.
"""
view = self.currentWebView()
QApplication.clipboard().setText(view.page().selectedText())
def currentContentsIndex( self ):
"""
Returns the last index used for the contents widgets.
:return <int>
"""
return self._currentContentsIndex
def currentContentsWidget( self, autoadd = False ):
"""
Returns the current contents widget based on the cached index. If \
no widget is specified and autoadd is True, then a new widget will \
be added to the tab.
:param autoadd | <bool>
:return <QWebView>
"""
widget = self.uiContentsTAB.widget(self.currentContentsIndex())
if ( not isinstance(widget, QWebView) ):
widget = None
if ( not widget and autoadd ):
widget = self.addContentsWidget()
return widget
def currentWebView(self):
return self.uiContentsTAB.currentWidget()
def dragEnterEvent(self, event):
if event.mimeData().hasUrls():
event.accept()
def dragMoveEvent(self, event):
if event.mimeData().hasUrls():
event.accept()
def dropEvent(self, event):
if event.mimeData().hasUrls():
for url in event.mimeData().urls():
self.loadFilename(str(url.toLocalFile()))
def findNext( self ):
"""
Looks for the previous occurance of the current search text.
"""
text = self.uiFindTXT.text()
view = self.currentWebView()
options = QWebPage.FindWrapsAroundDocument
if ( self.uiCaseSensitiveCHK.isChecked() ):
options |= QWebPage.FindCaseSensitively
view.page().findText(text, options)
def findPrev( self ):
"""
Looks for the previous occurance of the current search text.
"""
text = self.uiFindTXT.text()
view = self.currentWebView()
options = QWebPage.FindWrapsAroundDocument
options |= QWebPage.FindBackward
if ( self.uiCaseSensitiveCHK.isChecked() ):
options |= QWebPage.FindCaseSensitively
view.page().findText(text, options)
def findXdk( self, name ):
"""
Looks up the xdk item based on the current name.
:param name | <str>
:return <XdkItem> || None
"""
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
if ( item.text(0) == name ):
return item
return None
def goBack( self ):
widget = self.currentContentsWidget()
if ( widget ):
widget.page().history().back()
def goForward( self ):
widget = self.currentContentsWidget()
if ( widget ):
widget.page().history().forward()
def goHome( self ):
widget = self.currentContentsWidget()
if ( widget ):
widget.history().goHome()
def gotoUrl(self, url):
if not QApplication.keyboardModifiers() == Qt.ControlModifier:
widget = self.currentContentsWidget(autoadd = True)
else:
widget = self.addContentsWidget()
index = self.uiContentsTAB.indexOf(widget)
self.uiContentsTAB.setCurrentIndex(index)
widget.setUrl(QUrl(url))
def gotoItem(self, path):
"""
Goes to a particular path within the XDK.
:param path | <str>
"""
if not path:
return
sections = str(path).split('/')
check = projex.text.underscore(sections[0])
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
if projex.text.underscore(item.text(1)) == check:
item.gotoItem('/'.join(sections[1:]))
break
def loadItem( self, item ):
"""
Loads the inputed item.
:param item | <QTreeWidgetItem>
"""
if isinstance(item, XdkEntryItem):
item.load()
def loadedFilenames( self ):
"""
Returns a list of all the xdk files that are currently loaded.
:return [<str>, ..]
"""
output = []
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
output.append(str(item.filepath()))
return output
def loadFilename( self, filename = '' ):
"""
Loads a new XDK file into the system.
:param filename | <str>
:return <bool> | success
"""
if ( not (filename and isinstance(filename, basestring)) ):
filename = QFileDialog.getOpenFileName( self,
'Open XDK File',
QDir.currentPath(),
'XDK Files (*.xdk)' )
if type(filename) == tuple:
filename = str(filename[0])
if not filename:
return False
if not (filename and os.path.exists(filename)):
return False
elif filename in self.loadedFilenames():
return False
self.loadFileRequested.emit(filename)
self.setCursor(Qt.WaitCursor)
return True
def refreshFromIndex( self ):
"""
Refreshes the documentation from the selected index item.
"""
item = self.uiIndexTREE.currentItem()
if ( not item ):
return
self.gotoUrl(item.toolTip(0))
def refreshContents( self ):
"""
Refreshes the contents tab with the latest selection from the browser.
"""
item = self.uiContentsTREE.currentItem()
if not isinstance(item, XdkEntryItem):
return
item.load()
url = item.url()
if url:
self.gotoUrl(url)
def refreshUi( self ):
"""
Refreshes the interface based on the current settings.
"""
widget = self.uiContentsTAB.currentWidget()
is_content = isinstance(widget, QWebView)
if is_content:
self._currentContentsIndex = self.uiContentsTAB.currentIndex()
history = widget.page().history()
else:
history = None
self.uiBackACT.setEnabled(is_content and history.canGoBack())
self.uiForwardACT.setEnabled(is_content and history.canGoForward())
self.uiHomeACT.setEnabled(is_content)
self.uiNewTabACT.setEnabled(is_content)
self.uiCopyTextACT.setEnabled(is_content)
self.uiCloseTabACT.setEnabled(is_content and
self.uiContentsTAB.count() > 2)
for i in range(1, self.uiContentsTAB.count()):
widget = self.uiContentsTAB.widget(i)
self.uiContentsTAB.setTabText(i, widget.title())
def search( self ):
"""
Looks up the current search terms from the xdk files that are loaded.
"""
QApplication.instance().setOverrideCursor(Qt.WaitCursor)
terms = str(self.uiSearchTXT.text())
html = []
entry_html = '<a href="%(url)s">%(title)s</a><br/>'\
'<small>%(url)s</small>'
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
results = item.search(terms)
results.sort(lambda x, y: cmp(y['strength'], x['strength']))
for item in results:
html.append( entry_html % item )
if ( not html ):
html.append('<b>No results were found for %s</b>' % terms)
self.uiSearchWEB.setHtml(SEARCH_HTML % '<br/><br/>'.join(html))
QApplication.instance().restoreOverrideCursor()
def showFind( self ):
self.uiFindWIDGET.show()
self.uiFindTXT.setFocus()
self.uiFindTXT.selectAll()
def zoomIn( self ):
view = self.currentWebView()
view.setZoomFactor(view.zoomFactor() + 0.1)
def zoomOut( self ):
view = self.currentWebView()
view.setZoomFactor(view.zoomFactor() - 0.1)
def zoomReset( self ):
view = self.currentWebView()
view.setZoomFactor(1)
@staticmethod
def browse( parent, filename = '' ):
"""
Creates a new XdkWidnow for browsing an XDK file.
:param parent | <QWidget>
filename | <str>
"""
dlg = XdkWindow(parent)
dlg.show()
if ( filename ):
dlg.loadFilename(filename)
class AbbyyOcr(QObject):
# Signals
error = pyqtSignal(str)
def __init__(self, abbyy_path, parent=None):
super(AbbyyOcr, self).__init__(parent)
self.abbyy_path = abbyy_path
self.app_watcher = None
self.proc = None
self.current_profile = None
def ocr(self, path):
options = ['/OptionsFile', self.current_profile] if self.current_profile else []
args = [self.abbyy_path, path] + options + ['/send', 'Acrobat']
startup_info = subprocess.STARTUPINFO()
startup_info.dwFlags |= subprocess.STARTF_USESHOWWINDOW
self.proc = subprocess.Popen(args, startupinfo=startup_info)
self.app_watcher_thread = QThread()
self.app_watcher = AppWatcher(self.proc)
self.app_watcher.moveToThread(self.app_watcher_thread)
self.app_watcher.error.connect(self.emit_error)
self.app_watcher_thread.started.connect(self.app_watcher.start)
self.app_watcher_thread.finished.connect(self.app_watcher_thread.deleteLater)
self.app_watcher_thread.start()
def kill(self):
print 'Killing...'
try:
abbyy_temp_path = self.app_watcher.current_temp_path
if not abbyy_temp_path:
abbyy_temp_path = get_abbyy_temp_folder(self.pid)
self.proc.kill()
self.proc.wait()
self.proc = None
except AttributeError:
# The process has already been deleted.
abbyy_temp_path = None
try:
self.app_watcher.deleteLater()
self.app_watcher_thread.quit()
self.app_watcher_thread.wait()
except (RuntimeError, AttributeError):
# self.app_watcher already deleted.
pass
# Try to remove temp files.
if abbyy_temp_path:
print 'Removing', abbyy_temp_path
os.chmod(abbyy_temp_path, stat.S_IWRITE)
try:
rmtree(abbyy_temp_path)
map(os.remove, glob.glob('{0:s}/*.tmp'.format(os.path.join(tempfile.gettempdir(), 'FineReader10'))))
except (OSError, IOError, WindowsError):
pass
print 'Killed'
def emit_error(self, error_message):
self.kill()
self.error.emit(error_message)
def stop(self):
self.mutex.lock()
self.stopMe = 1
self.mutex.unlock()
QThread.wait(self)
class Runner:
"""A wrapper around thread and worker objects
Correctly starts a new thread and moves worker to it.
"""
def __init__(self, cls):
"""Store worker class in instance"""
self.cls = cls
self.running = False
def start(self, *args, **kwargs):
"""Starts worker in separate thread"""
# stop any previously running workers
self.stop()
self.result = None
self.error = None
self.running = True
self.thread = QThread()
self.worker = self.cls(*args, **kwargs)
self.worker.moveToThread(self.thread)
self.thread.started.connect(self.worker.start)
# graceful stop does not work without direct connection (?)
self.worker.finished.connect(self.thread.quit, Qt.DirectConnection)
self.worker.finished.connect(self.worker.deleteLater)
self.thread.finished.connect(self.thread.deleteLater)
# also save result/error on finish (useful for testing)
self.worker.finished.connect(self.handlefinished, Qt.DirectConnection)
self.worker.raised.connect(self.handleraised, Qt.DirectConnection)
self.worker.completed.connect(self.handlecompleted,
Qt.DirectConnection)
self.worker.killed.connect(self.handlekilled, Qt.DirectConnection)
self.thread.start()
# returns worker so caller can connect signals, etc.
return self.worker
def stop(self):
"""Attempts to gracefully stop worker
Forcefully terminates otherwise."""
logging.debug('Worker: trying to stop gracefully')
if not self.running:
logging.debug('Worker was not running')
return
try:
self.worker.kill()
if not self.thread.wait(settings.KILL_TIMEOUT):
raise KillTimeoutError()
except KillTimeoutError:
logging.warn('Worker: kill timed out, force terminating...')
self.thread.terminate()
self.thread.wait()
except Exception as e:
logging.warn('Worker: terminate failed!?')
logging.warn(e)
# The following methods are for testing
@pyqtSlot(str)
def handleraised(self, error):
"""Slot that saves error, useful for testing"""
logging.warn('[WORKER] raised: {}'.format(error))
self.error = error
@pyqtSlot(object)
def handlefinished(self):
logging.debug('[WORKER] finished')
self.running = False
@pyqtSlot(object)
def handlecompleted(self, result):
"""Slot that saves result, useful for testing"""
logging.debug('[WORKER] completed')
self.result = result
@pyqtSlot(object)
def handlekilled(self):
logging.debug('[WORKER] killed')
def wait(self, timeout):
"""Wait for thread to end, and return result
Useful for testing.
"""
try:
self.thread.wait(timeout)
return self.result
except:
return None
class MainWindow(QMainWindow):
"""
MainWindow widget.
Connects GUI and worker threads.
Inherits from:
QMainWindow
Buttons:
None
Signals:
None
"""
def __init__(self,
content_gui,
content_pipeline,
settings_folder,
mount_directory,
version,
parent=None):
"""
Setup the layout for the widget
Arguments:
content_gui - Content used to create the GUI outfit.
content_pipeline - Content used to start processing threads.
settings_folder - Name of the folder containing settings.
mount_directory - Name of the folder containing mount points.
version - Version of TranSPHIRE.
parent - Parent widget (default None)
Return:
None
"""
super(MainWindow, self).__init__(parent)
# Ask for sudo password if needed
self.password = ''
need_sudo_password = False
for content in content_gui:
if content['name'] == 'Status':
for entry in content['content']:
for widget in entry:
for key in widget:
if key == 'Mount/umount needs sudo password?':
if widget[key][0] == 'True':
need_sudo_password = True
else:
pass
else:
pass
elif content['name'] == 'Mount':
for entry in content['content_mount']:
for widget in entry:
for key in widget:
if key == 'Need sudo for copy?':
if widget[key][0] == 'True':
need_sudo_password = True
else:
pass
else:
pass
else:
pass
if need_sudo_password:
dialog = SudoPasswordDialog(self)
dialog.exec_()
if not dialog.result():
QCoreApplication.instance().quit()
sys.exit()
else:
self.password = dialog.password
else:
pass
# Start TranSPHIRE from HOME directory.
self.path = os.environ['HOME']
# Window title
self.setWindowTitle('{0} v{1} - {2} - {3}'.format(
'TranSPHIRE', version, self.path,
os.uname()[1]))
# Initiate contents
self.central_widget = None
self.content = None
self.layout = None
# Settings folder
self.settings_folder = settings_folder
self.mount_directory = mount_directory
self.temp_save = '{0}/temp_save'.format(settings_folder)
# Threads
self.mount_worker = None
self.process_worker = None
self.plot_worker = None
self.mount_calculation_ssh = None
self.mount_calculation_get = None
self.mount_calculation_df = None
self.thread_mount = None
self.thread_process = None
self.thread_plot = None
self.mount_thread_list = None
# Fill GUI
self.reset_gui(content_gui=content_gui,
content_pipeline=content_pipeline)
def start_threads(self, content_pipeline):
"""
Start threads used in TranSPHIRE.
Arguments:
content_pipeline - Content used to start processing threads.
Return:
None
"""
# Stop threads if already started.
if self.mount_worker is not None:
self.mount_worker.setParent(None)
if self.process_worker is not None:
self.process_worker.setParent(None)
if self.plot_worker is not None:
self.plot_worker.setParent(None)
if self.thread_mount is not None:
self.thread_mount.quit()
self.thread_mount.wait()
self.thread_mount.setParent(None)
if self.thread_process is not None:
self.thread_process.quit()
self.thread_process.wait()
self.thread_process.setParent(None)
if self.thread_plot is not None:
self.thread_plot.quit()
self.thread_plot.wait()
self.thread_plot.setParent(None)
if self.mount_thread_list is not None:
for setting in self.content['Mount'].get_settings():
for key in setting:
thread = self.mount_thread_list[key]['thread']
calculator = self.mount_thread_list[key]['object']
calculator.kill_thread = True
thread.quit()
thread.wait()
# Create objects used in threads
self.mount_worker = MountWorker(password=self.password,
settings_folder=self.settings_folder,
mount_directory=self.mount_directory)
self.process_worker = ProcessWorker(
password=self.password,
content_process=content_pipeline,
mount_directory=self.mount_directory)
self.plot_worker = PlotWorker()
# Create threads
self.thread_mount = QThread(self)
self.thread_process = QThread(self)
self.thread_plot = QThread(self)
# Start threads
self.thread_mount.start()
self.thread_process.start()
self.thread_plot.start()
# Start objects in threads
self.mount_worker.moveToThread(self.thread_mount)
self.process_worker.moveToThread(self.thread_process)
self.plot_worker.moveToThread(self.thread_plot)
def reset_gui(self, content_gui, content_pipeline, load_file=None):
"""
Reset the content of the mainwindow.
Arguments:
content_gui - Content used to fill the GUI.
content_pipeline - Content used to start processing threads.
load_file - Settings file (default None).
Return:
None
"""
# Fill MainWindow
self.set_central_widget()
self.set_layout_structure()
self.start_threads(content_pipeline=content_pipeline)
postprocess_content = self.fill_content(content_gui=content_gui)
self.postprocess_content(postprocess_content)
for content in content_gui:
if content['name'] == 'Status':
for entry in content['content']:
for widget in entry:
for key in widget:
if key == 'Project name pattern':
self.project_name_pattern = widget[key][0]
elif key == 'Project name pattern example':
self.project_name_pattern_example = widget[
key][0]
else:
pass
else:
pass
# Load settings saved in load_file
if load_file is not None:
self.load(file_name=load_file)
os.remove('{0}.txt'.format(load_file))
elif os.path.exists('{0}.txt'.format(self.temp_save)):
# Result is True if answer is No
result = tu.question(head='Restore previous session.',
text='Restore previous session?',
parent=self)
if result:
pass
else:
self.load(file_name=self.temp_save)
else:
pass
self.mount_worker.sig_load_save.emit()
def save_temp_settings(self):
"""
Save the status of the GUI in a temp file.
Arguments:
None
Return:
True, if saving was succesful.
"""
if os.path.exists('{0}.txt'.format(self.temp_save)):
os.remove('{0}.txt'.format(self.temp_save))
else:
pass
value = self.save(file_name=self.temp_save, temp=True)
return value
def postprocess_content(self, error_list):
"""
Do postprocessing of creating GUI content, like connecting signals.
Arguments:
error_list - List of errors that occured.
Return:
True, if saving was succesful.
"""
for entry in error_list:
tu.message(entry)
self.process_worker.sig_finished.connect(self._finished)
self.process_worker.sig_plot_ctf.connect(
self.plot_worker.calculate_array_ctf)
self.process_worker.sig_plot_motion.connect(
self.plot_worker.calculate_array_motion)
self.plot_worker.sig_message.connect(lambda msg: tu.message(msg))
self.mount_thread_list = {}
for key in self.content['Mount'].content:
thread = QThread(self)
thread.start()
mount_calculator = MountCalculator(name=key)
mount_calculator.moveToThread(thread)
self.mount_thread_list[key] = {
'thread': thread,
'object': mount_calculator
}
mount_calculator.sig_finished.connect(
self.content['Status'].refresh_quota)
mount_calculator.sig_finished.connect(self.abort_finished)
self.mount_worker.sig_calculate_ssh_quota.connect(
mount_calculator.calculate_ssh_quota)
self.mount_worker.sig_calculate_df_quota.connect(
mount_calculator.calculate_df_quota)
self.mount_worker.sig_calculate_get_quota.connect(
mount_calculator.calculate_get_quota)
self.content['Mount'].set_threadlist(
thread_list=self.mount_thread_list)
def abort_finished(self, *args, **kwargs):
"""
Set the mount worker abort variable to True.
Arguments:
None
Return:
None
"""
self.mount_worker.abort_finished = True
def set_central_widget(self):
"""
Reset the central widget of the MainWindow.
Arguments:
None
Return:
None
"""
if self.central_widget is not None:
self.central_widget.setParent(None)
else:
pass
self.central_widget = QWidget(self)
self.central_widget.setObjectName('central')
self.setCentralWidget(self.central_widget)
def set_layout_structure(self):
"""
Setup the layout structure for the central widget.
Arguments:
None
Return:
None
"""
# Layout dictionary
self.layout = {}
self.layout['h1'] = QHBoxLayout(self.central_widget)
self.layout['h2'] = QHBoxLayout()
self.layout['h3'] = QHBoxLayout()
self.layout['v'] = QVBoxLayout()
# Layout architecture
self.layout['h1'].addLayout(self.layout['v'], stretch=1)
self.layout['v'].addLayout(self.layout['h2'], stretch=0)
self.layout['v'].addWidget(Separator(typ='horizontal', color='grey'),
stretch=0)
self.layout['v'].addLayout(self.layout['h3'], stretch=1)
def fill_content(self, content_gui):
"""
Fill the layouts of the central widget.
Arguments:
content_gui - Content used to create the GUI outfit.
Return:
List of errors that occured.
"""
self.content = {}
exclude_set = tu.get_exclude_set(content=content_gui)
error_list = []
tab_list = []
for entry in content_gui:
key = entry['name']
if key in exclude_set:
continue
elif entry['layout'] in exclude_set:
continue
elif key == 'Stretch':
layout = entry['layout']
self.layout[layout].addStretch(1)
continue
elif key == 'Separator':
layout = entry['layout']
separator = entry['separator']
self.layout[layout].addWidget(separator)
continue
elif key == 'Path':
tu.reduce_path_widget(exclude_set=exclude_set,
content=entry['content'])
elif key == 'Copy':
tu.reduce_copy_entries(exclude_set=exclude_set,
content=entry['content'])
else:
pass
layout = entry['layout']
plot_labels = ''
plot_name = ''
try:
plot_name = layout.replace('Plot ', '')
plot_labels = ti.get_dtype_dict()[tu.get_function_dict()
[plot_name]['typ']]
except KeyError:
pass
# Create widget
self.content[key] = entry['widget'](
mount_worker=self.mount_worker,
process_worker=self.process_worker,
plot_worker=self.plot_worker,
settings_folder=self.settings_folder,
plot_labels=plot_labels,
plot_name=plot_name,
parent=self,
**entry)
if isinstance(self.content[key], TabDocker):
tab_list.append(key)
else:
pass
if layout in tab_list:
self.content[layout].add_tab(self.content[key], key)
else:
self.layout[layout].addWidget(self.content[key])
if key == 'Button':
self.content[key].sig_load.connect(self.load)
self.content[key].sig_save.connect(self.save)
self.content[key].sig_start.connect(self.start)
self.content[key].sig_stop.connect(self.stop_dialog)
self.content[key].sig_check_quota.connect(self.check_quota)
else:
pass
if key == 'Notification':
self.content[key].update_telegram()
self.content[key].update_email()
self.content[key].update()
self.content[key].sig_stop.connect(self.stop)
timer = QTimer(self)
timer.setInterval(20000)
timer.timeout.connect(self.content[key].get_telegram_messages)
timer.start()
else:
pass
if key == 'Plot per micrograph' or key == 'Plot histogram':
self.plot_worker.sig_data.connect(
self.content[key].update_figure)
else:
pass
return error_list
def check_quota(self):
"""
Check the quota for the project and scratch directory.
Arguments:
None
Return:
None
"""
global_settings = self.content['General'].get_settings()
global_settings = {'General': global_settings[0]}
self.mount_worker.sig_set_settings.emit(global_settings)
def load(self, file_name=None):
"""
Load settings from settings file.
Arguments:
file_name - Name of the file (default None)
Return:
None
"""
if file_name is None:
file_name = QFileDialog.getOpenFileName(
caption='Load settings',
directory=self.path,
options=QFileDialog.DontUseNativeDialog)
if QT_VERSION == 4:
file_name = file_name
elif QT_VERSION == 5:
file_name = file_name[0]
else:
raise ImportError(
'QT version unknown! Please contact the transphire authors!'
)
if not file_name:
return
else:
pass
if file_name.endswith('.txt'):
pass
elif os.path.exists(file_name):
pass
else:
file_name = '{0}.txt'.format(file_name)
settings = []
with open(file_name, 'r') as read:
for line in read:
line = line.replace('\n', '')
key, *value = line.split('\t')
if isinstance(value, list):
settings.append([key, *value])
else:
settings.append([key, value])
settings = self.settings_to_dict(settings=settings)
self.set_settings(settings=settings)
def set_settings(self, settings):
"""
Load settings from settings file.
Arguments:
settings - Settings as dictionary.
Return:
None
"""
for key in settings:
if key == 'End':
continue
else:
try:
self.content[key].set_settings(settings[key])
except KeyError:
print('Key', key, 'no longer exists')
continue
@staticmethod
def settings_to_dict(settings):
"""
Make the settings readable for the widgets set settings method.
Arguments:
settings - Settings as dictionary.
Return:
None
"""
settings_dict = {}
idx = -1
while idx < len(settings) - 1:
idx += 1
if settings[idx][0] == '###':
key = settings[idx][1]
if key == 'Frames':
settings_dict[key] = []
else:
settings_dict[key] = {}
continue
if len(settings[idx]) == 1:
settings[idx].append('')
if key == 'Frames':
setting = {}
setting[settings[idx][0]] = settings[idx][1]
for i in range(3):
idx += 1
setting[settings[idx][0]] = settings[idx][1]
settings_dict[key].append(setting)
else:
if key == 'Notification':
settings_dict[key].update({
settings[idx][0]: [settings[idx][1], settings[idx][2]]
})
else:
settings_dict[key].update(
{settings[idx][0]: settings[idx][1]})
return settings_dict
def save(self, file_name=None, temp=False):
"""
Save GUI status to file.
Arguments:
file_name - File name to save settings to.
temp - File is a temporary save file.
Return:
True, if saving was succesful.
"""
if file_name is None:
file_name = QFileDialog.getSaveFileName(
caption='Save settings',
directory=self.path,
options=QFileDialog.DontUseNativeDialog,
filter="Text files (*.txt)")
if QT_VERSION == 4:
file_name = file_name
elif QT_VERSION == 5:
file_name = file_name[0]
else:
raise ImportError(
'QT version unknown! Please contact the transphire authors!'
)
if not file_name:
return None
else:
pass
else:
pass
if file_name.endswith('.txt'):
pass
else:
file_name = '{0}.txt'.format(file_name)
# Do not override settings
if os.path.exists(file_name):
old_filename = file_name
for number in range(9999):
file_name = '{0}_{1}'.format(old_filename, number)
if os.path.exists(file_name):
continue
else:
break
else:
pass
error = False
with open(file_name, 'w') as write:
for key in self.content:
if key == 'Mount':
continue
else:
pass
try:
settings = self.content[key].get_settings()
except AttributeError:
continue
if settings is not None:
write.write('###\t{0}\n'.format(key))
for entry in settings:
for key_entry in entry:
write.write('{0}\t{1}\n'.format(
key_entry, entry[key_entry]))
else:
error = True
message = 'Setting of {0} not valid!'.format(key)
tu.message(message)
continue
write.write('###\tEnd\n')
write.write('The\tEnd\n')
message_pass = '******'.format(file_name)
message_error = 'Invalid setting detected! Saveing failed!'
if error:
os.remove(file_name)
tu.message(message_error)
print(message_error)
return False
else:
if temp:
pass
else:
tu.message(message_pass)
print(message_pass)
return True
@pyqtSlot()
def start(self):
"""
Start TranSPHIRE processing.
Arguments:
None
Return:
None
"""
self.enable(False)
settings = {}
# Load settings to pass them to the working threads
error_list = []
skip_list = ['Mount', 'Notification', 'Path', 'Frames']
for key in self.content:
try:
settings_widget = self.content[key].get_settings()
except AttributeError:
continue
else:
settings[key] = {}
if settings_widget is None:
self.enable(True)
return None
elif key == 'Frames':
settings_motion = {}
else:
pass
if key == 'Frames':
skip_name_list = []
else:
skip_name_list = tu.get_function_dict()[key]['allow_empty']
for entry in settings_widget:
if key not in skip_list:
for name in entry:
if not entry[name] and name not in skip_name_list:
error_list.append(
'{0}:{1} is not allowed to be emtpy!'.format(
key, name))
else:
pass
else:
pass
for idx, entry in enumerate(settings_widget):
if key == 'Frames':
settings_motion[idx] = entry
else:
settings[key].update(entry)
if key == 'Frames':
settings['motion_frames'] = settings_motion
else:
pass
if error_list:
tu.message('\n'.join(error_list))
self.enable(True)
return None
else:
pass
# Get mount information
for key in settings['Mount']:
device_name = key.replace(' ', '_')
save_file = os.path.join(self.settings_folder, device_name)
try:
with open(save_file, 'r') as read:
lines = read.readlines()
except FileNotFoundError:
continue
for line in lines:
name = line.split('\t')[0]
settings['user_{0}'.format(device_name)] = name
settings['user_Later'] = None
if not re.match(self.project_name_pattern,
settings['General']['Project name']):
self.enable(True)
tu.message(
'Project name needs to match pattern:\n{0}\n For example: {1}'.
format(self.project_name_pattern,
self.project_name_pattern_example))
return None
else:
pass
# Project folder names
settings['project_folder'] = os.path.join(
settings['General']['Project directory'],
settings['General']['Project name'])
settings['compress_folder'] = os.path.join(
settings['General']['Project directory'],
settings['General']['Project name'])
settings['motion_folder'] = os.path.join(
settings['General']['Project directory'],
settings['General']['Project name'])
settings['ctf_folder'] = os.path.join(
settings['General']['Project directory'],
settings['General']['Project name'])
settings['scratch_folder'] = os.path.join(
settings['General']['Scratch directory'],
settings['General']['Project name'])
settings['Copy_hdd_folder'] = self.mount_directory
settings['Copy_backup_folder'] = self.mount_directory
settings['Copy_work_folder'] = self.mount_directory
settings['settings_folder'] = os.path.join(settings['project_folder'],
'settings')
settings['queue_folder'] = os.path.join(settings['project_folder'],
'queue')
settings['error_folder'] = os.path.join(settings['project_folder'],
'error')
# Check for continue mode
if os.path.exists(settings['project_folder']):
result = self.continue_dialog(
text1='Output project folder already exists!',
text2='Do you really want to continue the old run?\nType: YES!'
)
if result:
result_session = self.continue_dialog(
text1='Software metafiles',
text2='Software metafiles (Atlas, ...) might be already copied!\n' + \
'Do you want to copy them again?\nType: YES!'
)
settings['Copy_software_meta'] = bool(result_session)
else:
settings['Copy_software_meta'] = True
else:
settings['Copy_software_meta'] = True
result = True
# Create project and settings folder
for name in [
'project_folder', 'settings_folder', 'scratch_folder',
'queue_folder', 'error_folder'
]:
try:
tu.mkdir_p(settings[name])
except FileNotFoundError:
tu.message('Project name cannot be empty')
self.enable(True)
return None
# Start or stop procedure
if result:
self.content['Button'].start_button.setText('Stop')
self.plot_worker.settings = settings
self.process_worker.sig_start.emit(settings)
self.mount_worker.set_settings(settings=settings)
self.save(
file_name=os.path.join(settings['settings_folder'],
settings['General']['Project name']))
self.save_temp_settings()
else:
tu.message('Input needs to be "YES!" to work')
self.enable(True)
def continue_dialog(self, text1, text2):
"""
Check if the user wants to run the continue mode.
Arguments:
text1 - Dialog window name.
text2 - Text of the dialog.
Return:
True, if the input is YES!
"""
dialog = QInputDialog(self)
result = dialog.getText(self, text1, text2)
return bool(result[0] == 'YES!')
@pyqtSlot()
def stop_dialog(self):
"""
Check if the user really wants to stop the process.
Arguments:
None
Return:
None
"""
result = self.continue_dialog(
text1='Do you really want to stop?',
text2='Do you really want to stop!\nType: YES!')
if result:
self.stop()
else:
tu.message('Input needs to be "YES!" to work')
@pyqtSlot()
def stop(self):
"""
Stop the process.
Arguments:
None
Return:
None
"""
self.process_worker.stop = True
self.content['Button'].start_button.setEnabled(False)
@pyqtSlot()
def _finished(self):
"""
Rename the Stop Button to start and enable everything.
Arguments:
None
Return:
None
"""
self.enable(True)
self.content['Button'].start_button.setText('Start')
self.content['Button'].start_button.setEnabled(True)
@pyqtSlot(bool)
def enable(self, var, use_all=False):
"""Enable or disable widgets
Arguments:
var - Enable status of the widgets.
use_all - Disable/Enable everything (Default False)
Return:
None
"""
for key in self.content:
try:
self.content[key].enable(var=var, use_all=use_all)
except AttributeError:
continue
def closeEvent(self, event):
"""
Quit threads before close and check if the process is still running
Arguments:
event - QCloseEvent.
Return:
None
"""
if self.content['Button'].start_button.text() == 'Stop':
event.ignore()
tu.message('First stop the program before closing')
return None
elif not self.save_temp_settings():
result = tu.question(
head='Error saving file!',
text='Wrong setting detected! Quit without saving?',
)
# Result is true if the answer is No
if not result:
pass
else:
event.ignore()
return None
else:
pass
self.thread_mount.quit()
self.thread_mount.wait()
self.thread_process.quit()
self.thread_process.wait()
self.thread_plot.quit()
self.thread_plot.wait()
for key in self.content['Mount'].content:
thread = self.mount_thread_list[key]['thread']
calculator = self.mount_thread_list[key]['object']
calculator.kill_thread = True
thread.quit()
thread.wait()
message = 'Bye Bye'
print(message)
super(MainWindow, self).closeEvent(event)
class RasterLegendSensitive(QObject):
def __init__(self, iface, treeView, ckEnabled):
super(RasterLegendSensitive, self).__init__()
self.tree = TreeLegend(treeView)
self.ckEnabled = ckEnabled
#
self.layer = self.worker = self.thread = self.transparencyLayer = None
self.isExtentLayer = self.valuesFullExtent = None
self.hasConnect = self.hasConnectTree = None
self.iface = iface
self.legend = iface.legendInterface()
self.canvas = iface.mapCanvas()
self.msgBar = iface.messageBar()
self.nameModulus = "RasterLegendSensitive"
#
self.initThread()
self._connect()
self._connectTree()
def __del__(self):
del self.tree
self.finishThread()
if not self.hasConnect:
self._connect(False)
if not self.layer is None:
self.setTransparenceLayer([])
def initThread(self):
self.thread = QThread(self)
self.thread.setObjectName(self.nameModulus)
self.worker = WorkerRasterLegendSensitive()
self.worker.moveToThread(self.thread)
self._connectWorker()
def finishThread(self):
self._connectWorker(False)
self.worker.deleteLater()
self.thread.wait()
self.thread.deleteLater()
self.thread = self.worker = None
def _connectWorker(self, isConnect=True):
ss = [{
'signal': self.thread.started,
'slot': self.worker.run
}, {
'signal': self.worker.finished,
'slot': self.finishedWorker
}, {
'signal': self.worker.messageStatus,
'slot': self.messageStatusWorker
}]
if isConnect:
for item in ss:
item['signal'].connect(item['slot'])
else:
for item in ss:
item['signal'].disconnect(item['slot'])
def _connect(self, isConnect=True):
ss = [{
'signal': self.legend.currentLayerChanged,
'slot': self.selectLayer
}, {
'signal': QgsMapLayerRegistry.instance().layerWillBeRemoved,
'slot': self.removeLayer
}, {
'signal': self.canvas.extentsChanged,
'slot': self.changeSensitiveLegend
}]
if isConnect:
self.hasConnect = True
for item in ss:
item['signal'].connect(item['slot'])
else:
self.hasConnect = False
for item in ss:
item['signal'].disconnect(item['slot'])
def _connectTree(self, isConnect=True):
ss = [{
'signal': self.tree.toggledLegend,
'slot': self.setTransparenceLayer
}, {
'signal': self.tree.descriptionLegend,
'slot': self.sendClipboard
}]
if isConnect:
self.hasConnectTree = True
for item in ss:
item['signal'].connect(item['slot'])
else:
self.hasConnectTree = False
for item in ss:
item['signal'].disconnect(item['slot'])
def _resetLayer(self):
if self.thread.isRunning():
self.worker.isKilled = True
self.layer = None
self.tree.setHeader()
self.tree.layer = None
def setEnabled(self, isEnabled=True):
if not isEnabled and self.thread.isRunning():
self.worker.isKilled = True
#
self._connect(isEnabled)
self._connectTree(isEnabled)
self.tree.setEnabled(isEnabled)
#
if isEnabled:
activeLayer = self.iface.activeLayer()
if activeLayer == self.layer:
if activeLayer is None:
return
self.changeSensitiveLegend()
else:
self.selectLayer(activeLayer)
@pyqtSlot(list)
def finishedWorker(self, values):
self.thread.quit()
self.msgBar.popWidget()
if not self.worker.isKilled:
if len(values) > 0: # Never Happing otherwise...
self.tree.setLegend(values)
if self.isExtentLayer:
self.valuesFullExtent = values
else: # When PAN/ZOOM/...
self.thread.wait()
if self.ckEnabled.checkState() == Qt.Checked:
self.changeSensitiveLegend()
@pyqtSlot(str)
def messageStatusWorker(self, msg):
self.msgBar.popWidget()
self.msgBar.pushMessage(self.nameModulus, msg, QgsMessageBar.INFO)
@pyqtSlot(list)
def setTransparenceLayer(self, visibleItems):
def refreshLayer():
if hasattr(self.layer, "setCacheImage"):
self.layer.setCacheImage(None) # Refresh
else:
self.layer.triggerRepaint()
def setTransparence(value, visible):
t = QgsRasterTransparency.TransparentSingleValuePixel()
t.min = t.max = value
percent = 100.0 if not visible else 0.0
t.percentTransparent = percent
return t
valuesTransparent = []
item = 0
for visible in visibleItems:
valuesTransparent.append(setTransparence(item, visible))
item += 1
self.transparencyLayer.setTransparentSingleValuePixelList(
valuesTransparent)
refreshLayer()
del valuesTransparent[:]
@pyqtSlot(str)
def sendClipboard(self, description):
mapSettings = self.canvas.mapSettings()
crsCanvas = mapSettings.destinationCrs()
extentCanvas = self.canvas.extent()
extentLayer = self.layer.extent()
if self.layer.crs() != crsCanvas:
extentCanvas = mapSettings.mapToLayerCoordinates(
self.layer, extentCanvas)
if extentCanvas == extentLayer or extentCanvas.contains(extentLayer):
msg = "Calculate for all extent of layer '%s'\n\n%s" % (
self.layer.name(), description)
else:
msg = "Calculate for subset of layer '%s' (extend: %s)\n\n%s" % (
self.layer.name(), extentCanvas.toString(), description)
clip = QApplication.clipboard()
clip.setText(msg)
self.msgBar.pushMessage(self.nameModulus, "Copy to Clipboard",
QgsMessageBar.INFO, 5)
@pyqtSlot('QgsMapLayer')
def selectLayer(self, layer):
def processLegend():
self.tree.setLayer(layer)
if not self.valuesFullExtent is None: # Save legend with all extent layer
del self.valuesFullExtent[:]
self.valuesFullExtent = None
(self.layer,
self.transparencyLayer) = (layer,
layer.renderer().rasterTransparency())
self.worker.setLegendReadBlock(layer)
self.changeSensitiveLegend()
if not self.layer is None:
if not self.layer in self.legend.layers():
self.removeLayer(self.layer.id())
else:
self.setTransparenceLayer([])
self._resetLayer()
if not layer is None and layer.type() == QgsMapLayer.RasterLayer:
legendItems = layer.legendSymbologyItems()
total = len(legendItems)
if total > 0: # Had a classification
processLegend()
@pyqtSlot(str)
def removeLayer(self, idLayer):
if not self.layer is None and self.layer.id() == idLayer:
msg = "Layer '%s' was removed" % self.tree.getLayerName()
self.msgBar.pushMessage(self.nameModulus, msg,
QgsMessageBar.WARNING, 5)
self._resetLayer()
@pyqtSlot()
def changeSensitiveLegend(self):
if self.layer is None:
return
if self.thread.isRunning():
self.worker.isKilled = True
return
mapSettings = self.canvas.mapSettings()
crsCanvas = mapSettings.destinationCrs()
extentCanvas = self.canvas.extent()
extentLayer = self.layer.extent()
resX = self.layer.rasterUnitsPerPixelX()
resY = self.layer.rasterUnitsPerPixelY()
if self.layer.crs() != crsCanvas:
extentCanvas = mapSettings.mapToLayerCoordinates(
self.layer, extentCanvas)
if not extentCanvas.intersects(extentLayer):
self.msgBar.popWidget()
self.msgBar.pushMessage(
self.nameModulus,
"View not intersects Raster '%s'" % self.layer.name(),
QgsMessageBar.WARNING, 5)
self.tree.setLegend([])
return
if extentCanvas == extentLayer or extentCanvas.contains(extentLayer):
self.isExtentLayer = True
if not self.valuesFullExtent is None:
self.tree.setLegend(self.valuesFullExtent)
return
extent = extentLayer
delta = 0
else:
self.isExtentLayer = False
extent = extentCanvas.intersect(extentLayer)
delta = 1
widthRead = int(extent.width() / resX) + delta
heightRead = int(extent.height() / resY) + delta
self.worker.setProcessImage(extent, widthRead, heightRead)
self.thread.start()
class CatalogOTF(QObject):
# Signals
settedLayer = pyqtSignal("QgsVectorLayer")
removedLayer = pyqtSignal(str)
killed = pyqtSignal(str)
changedNameLayer = pyqtSignal(str, str)
changedTotal = pyqtSignal(str, str)
changedIconRun = pyqtSignal(str, bool)
def __init__(self, iface, tableCOTF):
def connecTableCOTF():
self.settedLayer.connect(tableCOTF.insertRow)
self.removedLayer.connect(tableCOTF.removeRow)
self.changedNameLayer.connect(tableCOTF.changedNameLayer)
self.changedTotal.connect(tableCOTF.changedTotal)
self.changedIconRun.connect(tableCOTF.changedIconRun)
self.killed.connect(tableCOTF.killed)
super(CatalogOTF, self).__init__()
self.iface = iface
self.canvas = iface.mapCanvas()
self.ltv = iface.layerTreeView()
self.model = self.ltv.layerTreeModel()
self.ltgRoot = QgsProject.instance().layerTreeRoot()
self.msgBar = iface.messageBar()
self.legendTMS = LegendTMS('Catalog OTF')
self.legendRaster = LegendRaster('Catalog OTF')
self._initThread()
connecTableCOTF()
self.model.dataChanged.connect(self.dataChanged)
QgsMapLayerRegistry.instance().layersWillBeRemoved.connect(
self.layersWillBeRemoved) # Catalog layer removed
self.layer = self.layerName = self.nameFieldSource = self.nameFieldDate = None
self.ltgCatalog = self.ltgCatalogName = self.visibleSourceLayers = self.hasCanceled = None
def __del__(self):
self._finishThread()
del self.legendTMS
del self.legendRaster
QgsMapLayerRegistry.instance().layersWillBeRemoved.disconnect(
self.layersWillBeRemoved) # Catalog layer removed
def _initThread(self):
self.thread = QThread(self)
self.thread.setObjectName("QGIS_Plugin_%s" %
NAME_PLUGIN.replace(' ', '_'))
self.worker = WorkerPopulateGroup(self.addLegendLayerWorker)
self.worker.moveToThread(self.thread)
self._connectWorker()
def _finishThread(self):
self._connectWorker(False)
self.worker.deleteLater()
self.thread.wait()
self.thread.deleteLater()
self.thread = self.worker = None
def _connectWorker(self, isConnect=True):
ss = [{
'signal': self.thread.started,
'slot': self.worker.run
}, {
'signal': self.worker.finished,
'slot': self.finishedPG
}, {
'signal': self.worker.messageStatus,
'slot': self.messageStatusPG
}, {
'signal': self.worker.messageError,
'slot': self.messageErrorPG
}]
if isConnect:
for item in ss:
item['signal'].connect(item['slot'])
else:
for item in ss:
item['signal'].disconnect(item['slot'])
def addLegendLayerWorker(self, layer):
if layer.type() == QgsMapLayer.RasterLayer:
metadata = layer.metadata()
if metadata.find("GDAL provider") != -1:
if metadata.find("OGC Web Map Service") != -1:
if self.legendTMS.hasTargetWindows(layer):
self.legendTMS.setLayer(layer)
else:
self.legendRaster.setLayer(layer)
def run(self):
self.hasCanceled = False # Check in finishedPG
if self.thread.isRunning():
self.worker.kill()
self.hasCanceled = True
msgtrans = QCoreApplication.translate(
"CatalogOTF", "Canceled search for image from layer %s")
msg = msgtrans % self.layerName
self.msgBar.pushMessage(NAME_PLUGIN, msg, QgsMessageBar.WARNING, 2)
self.changedTotal.emit(self.layer.id(), "Canceling processing")
self.killed.emit(self.layer.id())
return
if self.layer is None:
msgtrans = QCoreApplication.translate("CatalogOTF",
"Need define layer catalog")
self.msgBar.pushMessage(NAME_PLUGIN, msgtrans,
QgsMessageBar.WARNING, 2)
return
self._setGroupCatalog()
self.ltgCatalogName = self.ltgCatalog.name()
renderFlag = self.canvas.renderFlag()
if renderFlag:
self.canvas.setRenderFlag(False)
self.canvas.stopRendering()
self._populateGroupCatalog()
if renderFlag:
self.canvas.setRenderFlag(True)
self.canvas.refresh()
def _populateGroupCatalog(self):
def getSourceVisibleLayers():
def hasVisibleRaster(ltl):
return ltl.isVisible() == Qt.Checked and ltl.layer().type(
) == QgsMapLayer.RasterLayer
l_ltlVisible = filter(lambda item: hasVisibleRaster(item),
self.ltgCatalog.findLayers())
return map(lambda item: item.layer().source(), l_ltlVisible)
def runWorker():
data = {}
data['nameFieldDate'] = self.nameFieldDate
data['nameFieldSource'] = self.nameFieldSource
data['layer'] = self.layer
data['ltgCatalog'] = self.ltgCatalog
self.worker.setData(data)
self.thread.start()
#self.worker.run() # DEBUG
self.visibleSourceLayers = getSourceVisibleLayers()
self.ltgCatalog.removeAllChildren()
runWorker() # See finishPG
def _setGroupCatalog(self):
self.ltgCatalogName = "%s - Catalog" % self.layer.name()
self.ltgCatalog = self.ltgRoot.findGroup(self.ltgCatalogName)
if self.ltgCatalog is None:
self.ltgCatalog = self.ltgRoot.addGroup(self.ltgCatalogName)
@pyqtSlot(bool)
def finishedPG(self, isKilled):
def setSourceVisibleLayers():
l_ltlVisible = filter(
lambda item: item.layer().source() in self.visibleSourceLayers,
self.ltgCatalog.findLayers())
map(lambda item: item.setVisible(Qt.Checked), l_ltlVisible)
self.thread.quit()
if not self.layer is None:
self.changedIconRun.emit(self.layer.id(),
self.layer.selectedFeatureCount() > 0)
if self.hasCanceled:
self.changedTotal.emit(self.layer.id(), '0')
else:
setSourceVisibleLayers()
del self.visibleSourceLayers[:]
@pyqtSlot(str)
def messageStatusPG(self, msg):
self.changedTotal.emit(self.layer.id(), msg)
@pyqtSlot(str)
def messageErrorPG(self, msg):
self.msgBar.pushMessage(NAME_PLUGIN, msg, QgsMessageBar.CRITICAL, 8)
@pyqtSlot('QModelIndex', 'QModelIndex')
def dataChanged(self, idTL, idBR):
if idTL != idBR:
return
if not self.ltgCatalog is None and self.ltgCatalog == self.model.index2node(
idBR):
name = self.ltgCatalog.name()
if self.ltgCatalogName != name:
self.ltgCatalogName = name
return
if not self.layer is None and self.ltgRoot.findLayer(
self.layer.id()) == self.model.index2node(idBR):
name = self.layer.name()
if self.layerName != name:
self.changedNameLayer.emit(self.layer.id(), name)
self.layerName = name
@pyqtSlot(list)
def layersWillBeRemoved(self, layerIds):
if self.layer is None:
return
if self.layer.id() in layerIds:
self.removedLayer.emit(self.layer.id())
self.removeLayerCatalog()
@staticmethod
def getNameFieldsCatalog(layer):
def getFirstFeature():
f = QgsFeature()
#
fr = QgsFeatureRequest(
) # First FID can be 0 or 1 depend of provider type
it = layer.getFeatures(fr)
isOk = it.nextFeature(f)
it.close()
#
if not isOk or not f.isValid():
del f
return None
else:
return f
def hasAddress(feature, nameField):
def asValidUrl(url):
isOk = True
try:
urllib2.urlopen(url)
except urllib2.HTTPError, e:
isOk = False
except urllib2.URLError, e:
isOk = False
#
return isOk
value = feature.attribute(nameField)
if value is None or type(value) == QPyNullVariant:
return False
isUrl = value.find('http://') == 0 or value.find('https://') == 0
lenSource = len(value)
isUrl = isUrl and value.rfind(
'xml', lenSource - len('xml')) == lenSource - len('xml')
if isUrl:
return asValidUrl(value)
#
fileInfo = QFileInfo(value)
return fileInfo.isFile()
class MavDialog(QDialog):
# .. _updateMavState:
#
# This signal, sent by a MAV, informs the GUI of the MAV's current state. It simply invokes _on_updateMavState.
updateMavState = pyqtSignal(
# See mavIndex_.
int,
# See MAV_STATES_.
object)
def __init__(self,
# .. _numMavs:
#
# The number of MAVs in the simulation.
numMavs,
# See _flyTimeSec.
flyTimeSec,
# See _chargeTimeSec.
chargeTimeSec):
# First, let the QDialog initialize itself.
super(MavDialog, self).__init__()
# Create a ChargingStation to manage the MAVs.
self._chargingStation = ChargingStation(self, numMavs, flyTimeSec,
chargeTimeSec)
# `Load <http://pyqt.sourceforge.net/Docs/PyQt4/designer.html#PyQt4.uic.loadUi>`_
# in our UI. The secord parameter lods the resulting UI directly into
# this class.
uic.loadUi(join(dirname(__file__), 'mav_gui.ui'), self)
# Only allow numbers between 0 and 99 for the line edits.
flyTimeValidator = QDoubleValidator(0.0, 9.9, 1, self)
flyTimeValidator.setNotation(QDoubleValidator.StandardNotation)
self.leFlyTime.setValidator(flyTimeValidator)
chargeTimeValidator = QDoubleValidator(0.0, 9.9, 1, self)
chargeTimeValidator.setNotation(QDoubleValidator.StandardNotation)
self.leChargeTime.setValidator(chargeTimeValidator)
# Example: create a separate thread
self._thread = QThread(self)
#self._thread.start()
# Create a worker.
self._worker = DummyWorker(self)
# Timer examples
# ^^^^^^^^^^^^^^
# A single-shot timer. It can't be canceled.
QTimer.singleShot(1500, self._onTimeout)
# Another single-shot timer. Because it has a name, it can be canceled.
self._timer = QTimer(self)
self._timer.timeout.connect(self._onTimeout)
self._timer.setSingleShot(True)
self._timer.start(3000)
# Add in status info GUI for numMavs MAVs.
hl = QHBoxLayout()
self.wMavStatus.setLayout(hl)
assert numMavs > 0
self.numMavs = numMavs
self.mavStatus = []
self.electrodeStatus = []
self._chargeTimeSec = [chargeTimeSec]*self.numMavs
self._flyTimeSec = [flyTimeSec]*self.numMavs
for index in range(self.numMavs):
e = UncheckableRadioButton(self)
self.electrodeStatus.append(e)
hl.addWidget(e)
# Add in a group box.
smw = SingleMavWidget()
mavName = 'MAV {}'.format(index + 1)
smw.gb = QGroupBox(mavName, self.wMavStatus)
vl = QVBoxLayout()
smw.gb.setLayout(vl)
smw.rbFlying = UncheckableRadioButton('Flying', smw.gb)
smw.rbWaiting = UncheckableRadioButton('Waiting', smw.gb)
smw.rbCharging = UncheckableRadioButton('Charging', smw.gb)
vl.addWidget(smw.rbFlying)
vl.addWidget(smw.rbWaiting)
vl.addWidget(smw.rbCharging)
self.mavStatus.append(smw)
hl.addWidget(smw.gb)
# Update the combo box.
self.cbSelectedMav.insertItem(index, mavName)
# Update GUI with parameters.
self.on_cbSelectedMav_currentIndexChanged(0)
self.updateMavState.connect(self._on_updateMavState)
# .. _on_updateMavState:
#
# A standardized way for MAVs to update their status. Should be invoked
@pyqtSlot(int, object)
def _on_updateMavState(self,
# See mavIndex_.
mavIndex,
# See MAV_STATES_.
mavState):
# Make only one of the radio buttons checkable, so that the user can't check a different one.
ms = self.mavStatus[mavIndex]
if mavState == _MAV_STATES.Waiting:
ms.rbWaiting.setCheckable(True)
ms.rbFlying.setCheckable(False)
ms.rbCharging.setCheckable(False)
ms.rbWaiting.setChecked(True)
elif mavState == _MAV_STATES.Flying:
ms.rbWaiting.setCheckable(False)
ms.rbFlying.setCheckable(True)
ms.rbCharging.setCheckable(False)
self.mavStatus[mavIndex].rbFlying.setChecked(True)
elif mavState == _MAV_STATES.Charging:
ms.rbWaiting.setCheckable(False)
ms.rbFlying.setCheckable(False)
ms.rbCharging.setCheckable(True)
self.mavStatus[mavIndex].rbCharging.setChecked(True)
else:
assert False
@pyqtSlot()
def _onTimeout(self):
self.hsFlyTime.setValue(50)
@pyqtSlot(int)
def on_hsFlyTime_valueChanged(self, value):
flyTimeSec = value/10.0
self._chargingStation._mav[self.cbSelectedMav.currentIndex()].updateFlyTimeSec.emit(flyTimeSec)
self.leFlyTime.setText(str(flyTimeSec))
self._flyTimeSec[self.cbSelectedMav.currentIndex()] = flyTimeSec
self._worker.run.emit(1.5)
@pyqtSlot()
def on_leFlyTime_editingFinished(self):
self.hsFlyTime.setValue(float(self.leFlyTime.text())*10.0)
@pyqtSlot(int)
def on_hsChargeTime_valueChanged(self, value):
chargeTimeSec = value/10.0
self._chargingStation._mav[self.cbSelectedMav.currentIndex()].updateChargeTimeSec.emit(chargeTimeSec)
self.leChargeTime.setText(str(chargeTimeSec))
self._chargeTimeSec[self.cbSelectedMav.currentIndex()] = chargeTimeSec
self._worker.run.emit(1.5)
@pyqtSlot()
def on_leChargeTime_editingFinished(self):
self.hsChargeTime.setValue(float(self.leChargeTime.text())*10.0)
@pyqtSlot(int)
def on_cbSelectedMav_currentIndexChanged(self, index):
self.hsChargeTime.setValue(self._chargeTimeSec[index]*10)
self.hsFlyTime.setValue(self._flyTimeSec[index]*10)
# Free all resources used by this class.
def terminate(self):
self._thread.quit()
self._thread.wait()
self._timer.stop()
class BAONQtApplication(QApplication):
BACKUP_DIALOG_CAPTION = 'Rename Plan Backup Detected'
BACKUP_DIALOG_ERROR_CAPTION = 'Error'
BACKUP_INTRO_TEXT = 'BAON has detected a backed up rename plan from a previous run of the '\
'application. This suggests that the application crashed partway through executing a rename operation. The '\
'files may have been left in an inconsistent state.'
BACKUP_PROMPT_TEXT = 'What do you want to do?'
REVERT_BACKUP_PROGRESS_TEXT = 'Reverting the rename operation'
SUCCESS_DIALOG_CAPTION = 'Success'
WARNING_DIALOG_CAPTION = 'Warning'
BACKUP_DELETED_DIALOG_TEXT =\
'The backed up plan has been deleted. Further runs of the application will proceed normally.'
BACKUP_REVERTED_SUCCESS_DIALOG_TEXT = 'The rename operation has been reverted successfully. The directory state '\
'should now have been completely restored.'
BACKUP_REVERTED_WARNING_DIALOG_TEXT = 'There were inconsistencies while trying to revert the previous rename '\
'operation. The directory state may not have been fully restored.'
REVERT_BACKUP_BUTTON_TEXT = 'Revert the rename (recommended)'
DELETE_BACKUP_BUTTON_TEXT = 'Delete the backup file'
EXAMINE_BACKUP_BUTTON_TEXT = 'Examine the plan in a text editor'
QUIT_BUTTON_TEXT = 'Quit BAON'
request_revert_backup = pyqtSignal()
request_delete_backup = pyqtSignal()
_main_window = None
_core = None
_progress_dialog = None
_core_thread = None
def __init__(self, args):
super().__init__(sys.argv)
# Actually we do quit when the last window is closed, but we need to do this in a more controlled way
self.setQuitOnLastWindowClosed(False)
self._init_threads()
self._init_main_objects(args)
self._connect_main_objects()
self._start_core()
def event(self, evt):
if isinstance(evt, QFileOpenEvent):
path = evt.file()
if not os.path.isdir(path):
path, _ = os.path.split(path)
self._main_window.set_base_path(path)
return True
return super().event(evt)
def _init_threads(self):
self._core_thread = QThread()
self._core_thread.start()
def _init_main_objects(self, args):
self._main_window = MainWindow(args)
self._core = BAONQtCore(args)
self._core.moveToThread(self._core_thread)
def _connect_main_objects(self):
self.aboutToQuit.connect(self._on_quit)
# Core vs. application
self._core.request_backup_decision.connect(self.backup_decision_requested)
self._core.reverted_backup.connect(self.notify_backup_reverted)
self._core.revert_backup_error.connect(self.handle_backup_op_error)
self._core.deleted_backup.connect(self.notify_backup_deleted)
self._core.delete_backup_error.connect(self.handle_backup_op_error)
self.request_revert_backup.connect(self._core.revert_backup)
self.request_delete_backup.connect(self._core.delete_backup)
# Core vs. main window
self._core.prologue_finished.connect(self._main_window.show_first_time)
self._core.status_changed.connect(self._main_window.report_status)
self._core.scanned_files_updated.connect(self._main_window.update_scanned_files)
self._core.renamed_files_updated.connect(self._main_window.update_renamed_files)
self._core.has_shutdown.connect(self.quit)
self._main_window.base_path_edited.connect(self._core.update_base_path)
self._main_window.scan_recursive_changed.connect(self._core.update_scan_recursive)
self._main_window.rules_text_changed.connect(self._core.update_rules_text)
self._main_window.use_path_changed.connect(self._core.update_use_path)
self._main_window.use_extension_changed.connect(self._core.update_use_extension)
self._main_window.request_add_override.connect(self._core.add_override)
self._main_window.request_remove_override.connect(self._core.remove_override)
self._main_window.request_do_rename.connect(self._core.do_rename)
self._main_window.request_rescan.connect(self._core.rescan)
self._main_window.rejected.connect(self._core.shutdown)
def _start_core(self):
QMetaObject.invokeMethod(self._core, 'start', Qt.QueuedConnection)
def _on_quit(self):
self._core_thread.quit()
self._core_thread.wait()
@pyqtSlot()
def backup_decision_requested(self):
self._show_backup_decision()
@pyqtSlot(Exception)
def handle_backup_op_error(self, error):
self._close_progress_dialog()
self._show_backup_decision(error=error)
@pyqtSlot()
def notify_backup_deleted(self):
QMessageBox.information(
None,
self.SUCCESS_DIALOG_CAPTION,
self.BACKUP_DELETED_DIALOG_TEXT,
)
@pyqtSlot(bool)
def notify_backup_reverted(self, complete_success):
self._close_progress_dialog()
if complete_success:
QMessageBox.information(
None,
self.SUCCESS_DIALOG_CAPTION,
self.BACKUP_REVERTED_SUCCESS_DIALOG_TEXT,
)
else:
QMessageBox.warning(
None,
self.WARNING_DIALOG_CAPTION,
self.BACKUP_REVERTED_WARNING_DIALOG_TEXT,
)
def _show_backup_decision(self, error=None):
text = '<p>{0}</p><p>{1}</p>'.format(
self.BACKUP_INTRO_TEXT if error is None else error,
self.BACKUP_PROMPT_TEXT,
)
dialog = QMessageBox(
QMessageBox.Question if error is None else QMessageBox.Critical,
self.BACKUP_DIALOG_CAPTION if error is None else self.BACKUP_DIALOG_ERROR_CAPTION,
text,
)
revert_button = dialog.addButton(self.REVERT_BACKUP_BUTTON_TEXT, QMessageBox.AcceptRole)
delete_button = dialog.addButton(self.DELETE_BACKUP_BUTTON_TEXT, QMessageBox.DestructiveRole)
examine_button = dialog.addButton(self.EXAMINE_BACKUP_BUTTON_TEXT, QMessageBox.ActionRole)
dialog.addButton(self.QUIT_BUTTON_TEXT, QMessageBox.RejectRole)
dialog.exec()
clicked_button = dialog.clickedButton()
if clicked_button == examine_button:
QMetaObject.invokeMethod(self, '_examine_backup', Qt.QueuedConnection)
elif clicked_button == revert_button:
self._progress_dialog = QProgressDialog(None)
self._progress_dialog.setLabelText(self.REVERT_BACKUP_PROGRESS_TEXT)
self._progress_dialog.setCancelButton(None)
self._progress_dialog.setRange(0, 0)
self._progress_dialog.forceShow()
self.request_revert_backup.emit()
elif clicked_button == delete_button:
self.request_delete_backup.emit()
else:
self.quit()
@pyqtSlot()
def _examine_backup(self):
error = None
try:
filename = get_rename_plan_backup_filename()
QDesktopServices.openUrl(QUrl.fromLocalFile(filename))
except Exception as err:
error = err
finally:
self._show_backup_decision(error)
def _close_progress_dialog(self):
if self._progress_dialog is not None:
self._progress_dialog.close()
self._progress_dialog = None
class file_transfer(iface_gui_plugin):
VERSION_INITIAL = 0
VERSION_CURRENT = VERSION_INITIAL
def __init__(self):
super(file_transfer, self).__init__()
self.options = [((u"download_dir", u"Save received files in directory", self._downloadDirChanged), os.path.join(os.path.expanduser("~"), "Downloads")),
((u"overwrite", u"Overwrite existing files", self._overwriteChanged), False),
((u"compression", u"Use compression when sending", self._compressionChanged, (u"No", u"GZip", u"BZip2")), u"No")]
def get_displayed_name(self):
return u"File Transfer"
def activate(self):
iface_gui_plugin.activate(self)
self._sendFileAction = _TransferFileAction()
def deactivate(self):
iface_gui_plugin.deactivate(self)
def create_widget(self, parent):
from file_transfer.file_transfer_widget import FileTransferWidget
from file_transfer.file_transfer_handler import FileTransferHandler
if canUseBackgroundQThreads():
from PyQt4.QtCore import QThread
self._handlerThread = QThread()
else:
self._handlerThread = None
self._handler = FileTransferHandler(self.logger,
self.get_option(u"download_dir"),
self.get_option(u"overwrite"),
self.get_option(u"compression"))
if self._handlerThread is not None:
self._handlerThread.moveToThread(self._handlerThread)
self._handlerThread.start()
self._gui = FileTransferWidget(parent, self.logger, self)
self._toolWindow = FileTransferWidget(parent, self.logger, self, asWindow=True)
self._toolWindow.setWindowTitle("File Transfers")
for gui in (self._gui, self._toolWindow):
gui.retry.connect(self._handler.retrySendFileToPeer)
gui.cancel.connect(self._handler.cancelOutgoingTransfer)
self._handler.startOutgoingTransfer.connect(gui.startOutgoingTransfer)
self._handler.outgoingTransferStarted.connect(gui.outgoingTransferStarted)
self._handler.outgoingTransferCanceled.connect(gui.outgoingTransferCanceled)
self._handler.incomingTransferStarted.connect(gui.incomingTransferStarted)
return self._gui
def destroy_widget(self):
for gui in (self._gui, self._toolWindow):
gui.retry.disconnect(self._handler.retrySendFileToPeer)
gui.cancel.disconnect(self._handler.cancelOutgoingTransfer)
self._handler.startOutgoingTransfer.disconnect(gui.startOutgoingTransfer)
self._handler.outgoingTransferStarted.disconnect(gui.outgoingTransferStarted)
self._handler.outgoingTransferCanceled.disconnect(gui.outgoingTransferCanceled)
self._handler.incomingTransferStarted.disconnect(gui.incomingTransferStarted)
self._handler.deactivate()
if self._handlerThread is not None:
self._handlerThread.quit()
self._handlerThread.wait()
self._handlerThread.deleteLater()
self._handlerThread = None
self._handler = None
iface_gui_plugin.destroy_widget(self)
def extendsInfoDict(self):
# do not except file transfers without GUI
return lunchinator_has_gui()
def extendInfoDict(self, infoDict):
infoDict[u"FT_v"] = self.VERSION_CURRENT
def get_peer_actions(self):
return [self._sendFileAction]
def process_event(self, cmd, value, peerIP, peerInfo, preprocessedData=None):
if not cmd.startswith(u"HELO_FT"):
return
peerID = peerInfo[u"ID"]
subcmd = cmd[7:]
if subcmd == u"":
self._handler.processSendRequest(peerID, peerIP, value, preprocessedData)
elif subcmd == u"_ACK":
self._handler.processAck(peerID, peerIP, value)
elif subcmd == u"_CANCEL":
self._handler.processCancel(peerID, value)
def getSendFileAction(self):
return self._sendFileAction
def chooseAndSendFilesToPeer(self, peerID, parent):
from PyQt4.QtGui import QFileDialog
selectedFiles = QFileDialog.getOpenFileNames(parent, u"Chooses files to upload")
if len(selectedFiles) > 0:
self._handler.sendFilesToPeer([convert_string(f) for f in selectedFiles], peerID)
def sendFilesToPeer(self, toSend, peerID):
self._handler.sendFilesToPeer([convert_string(f) for f in toSend], peerID)
def _downloadDirChanged(self, _setting, newVal):
self._handler.downloadDirChanged(newVal)
return newVal
def _overwriteChanged(self, _setting, newVal):
self._handler.overwriteChanged(newVal)
return newVal
def _compressionChanged(self, _setting, newVal):
self._handler.compressionChanged(newVal)
return newVal
class GCode(object):
def __init__(self, filename, controller, done_loading_callback,
done_writing_callback):
self.controller = controller
self.done_loading_callback = done_loading_callback
self.writing_done_callback = done_writing_callback
self.data = defaultdict(list)
self.all_data = []
self.data_keys = set()
self.color_change_data = []
self.actual_z = '0.0'
self.speed = 0.0
self.z_hop = False
self.last_point = np.array([0.0, 0.0, 0.0])
self.actual_point = [0.0, 0.0, 0.0]
self.printing_time = 0.0
self.filament_length = 0.0
#print("Filename type: " + str(type(filename)))
#print("Filename: " + filename)
#if type(filename)==:
#self.filename = u'c:\\models\\super mega testovací Jindřich šložka čěýáéůú\\anubis_PLA_OPTIMAL.gcode'
self.filename = filename
self.is_loaded = False
self.gcode_parser = GcodeParserRunner(controller, self.filename)
self.gcode_parser_thread = QThread()
self.gcode_copy = GcodeCopyRunner(
self.filename, "", color_change_lst=self.color_change_data)
self.gcode_copy_thread = QThread()
def cancel_parsing_gcode(self):
print("Cancel presset")
if self.gcode_parser and self.gcode_parser_thread and self.gcode_parser_thread.isRunning(
):
self.gcode_parser.is_running = False
self.gcode_parser_thread.quit()
self.gcode_parser_thread.wait()
self.is_loaded = False
self.data = {}
self.all_data = []
self.data_keys = []
self.controller.set_progress_bar(0)
def cancel_writing_gcode(self):
print("Cancel writing gcode")
if self.gcode_copy and self.gcode_copy_thread and self.gcode_copy_thread.isRunning(
):
self.gcode_copy.quit()
self.gcode_copy_thread.wait()
def get_first_extruding_line_number_of_gcode_for_layers(
self, layers_keys_lst):
lines_number = []
for i in layers_keys_lst:
line = self.data[i]
for o in line:
_a, _b, type, _speed, _extr, _extruder, line_n = o
if 'E' in type:
lines_number.append(line_n)
break
return lines_number
def read_in_thread(self, update_progressbar_function, after_done_function):
print("reading in thread")
self.gcode_parser.moveToThread(self.gcode_parser_thread)
self.done_loading_callback = after_done_function
# connect all signals to thread class
self.gcode_parser_thread.started.connect(
self.gcode_parser.load_gcode_file)
# connect all signals to parser class
self.gcode_parser.finished.connect(self.set_finished_read)
self.gcode_parser.update_progressbar = True
self.gcode_parser.set_update_progress.connect(
update_progressbar_function)
self.gcode_parser.set_data_keys.connect(self.set_data_keys)
self.gcode_parser.set_data.connect(self.set_data)
self.gcode_parser.set_all_data.connect(self.set_all_data)
self.gcode_parser.set_printing_time.connect(self.set_printig_time)
self.gcode_parser_thread.start()
def read_in_realtime(self):
print("Read in realtime")
self.gcode_parser.set_data_keys.connect(self.set_data_keys)
self.gcode_parser.set_data.connect(self.set_data)
self.gcode_parser.set_all_data.connect(self.set_all_data)
self.gcode_parser.set_printing_time.connect(self.set_printig_time)
self.gcode_parser.update_progressbar = False
print("start read procedure")
self.gcode_parser.load_gcode_file()
self.is_loaded = True
def set_printig_time(self, time):
self.printing_time = time
def set_data_keys(self, data_keys):
self.data_keys = data_keys
def set_all_data(self, all_data):
self.all_data = all_data
def set_data(self, data):
self.data = data
def set_finished_read(self):
self.gcode_parser_thread.quit()
self.is_loaded = True
self.done_loading_callback()
#self.controller.set_gcode()
def set_finished_copy(self):
self.gcode_copy_thread.quit()
#print(str(self.writing_done_callback))
self.writing_done_callback()
def set_color_change_data(self, data):
self.color_change_data = data
def write_with_changes_in_thread(self, filename_in, filename_out,
update_function):
self.gcode_copy.filename_in = filename_in
self.gcode_copy.filename_out = filename_out
self.gcode_copy.color_change_lst = self.color_change_data
self.gcode_copy.moveToThread(self.gcode_copy_thread)
self.gcode_copy_thread.started.connect(self.gcode_copy.write_file)
self.gcode_copy.finished.connect(self.set_finished_copy)
self.gcode_copy.set_update_progress.connect(update_function)
self.gcode_copy_thread.start()
def stop(self):
self.mutex.lock()
self.stopMe = 1
self.mutex.unlock()
QThread.wait(self)
class ImageStream(QtGui.QLabel):
def __init__(self, cal_wizard, device):
super(ImageStream, self).__init__()
self.cal_wizard = cal_wizard
self.signal_snap = QtCore.SIGNAL("snapshot_taken")
self.signal_reload = QtCore.SIGNAL("reload")
self.device = device
tree = ET.parse(device.local_config_path)
self.group = tree.find('communicator').find('group').text
self.receiver_thread = QThread()
self.receiver_thread.start()
self.image_receiver = ImageReceiver(self.device, self.group)
self.image_receiver.moveToThread(self.receiver_thread)
self.connect(self.image_receiver, self.image_receiver.signal, self.update_image)
self.transmitter_thread = QThread()
self.transmitter_thread.start()
self.image_transmitter = ImageTransmitter(self.device)
self.image_transmitter.moveToThread(self.transmitter_thread)
self.connect(self.image_transmitter, self.image_transmitter.signal, self.reload)
def finish(self):
self.stop()
self.receiver_thread.quit()
self.receiver_thread.wait()
self.transmitter_thread.quit()
self.transmitter_thread.wait()
def start(self):
QtCore.QTimer.singleShot(0, self.image_transmitter.task)
QtCore.QTimer.singleShot(0, self.image_receiver.task)
def update_image(self):
self.setPixmap(QtGui.QPixmap.fromImage(self.image_receiver.img))
return
def stop(self):
# note: The image receiver has to be stopped first
# otherwise zyre will keep waiting for a message from the
# transmitter indefinitely
self.image_receiver.stop()
self.image_transmitter.stop()
def snap(self):
# give command to take snapshot
self.image_receiver.snap()
# download snapshot
ssh = self.device.ssh_manager.get_ssh()
sftp = ssh.open_sftp()
sftp.get(os.path.join(paths.get_remote_config_dir(self.device), 'snapshot.png'), self.cal_wizard.get_next_snap_path(self.device))
sftp.remove(os.path.join(paths.get_remote_config_dir(self.device), 'snapshot.png'))
ssh.close()
self.emit(self.signal_snap, 'snapshot taken')
def reload(self):
# Stop ImageTransmitter/Receiver
self.stop()
# Start ImageTransmitter again
self.start()
self.emit(self.signal_reload, 'reload')
class GCode(object):
def __init__(self, filename, controller, done_loading_callback, done_writing_callback):
self.controller = controller
self.done_loading_callback = done_loading_callback
self.writing_done_callback = done_writing_callback
self.data = defaultdict(list)
self.all_data = []
self.data_keys = set()
self.color_change_data = []
self.actual_z = '0.0'
self.speed = 0.0
self.z_hop = False
self.last_point = np.array([0.0, 0.0, 0.0])
self.actual_point = [0.0, 0.0, 0.0]
self.printing_time = 0.0
self.filament_length = 0.0
#print("Filename type: " + str(type(filename)))
#print("Filename: " + filename)
#if type(filename)==:
#self.filename = u'c:\\models\\super mega testovací Jindřich šložka čěýáéůú\\anubis_PLA_OPTIMAL.gcode'
self.filename = filename
self.is_loaded = False
self.gcode_parser = GcodeParserRunner(controller, self.filename)
self.gcode_parser_thread = QThread()
self.gcode_copy = GcodeCopyRunner(self.filename, "", color_change_lst=self.color_change_data)
self.gcode_copy_thread = QThread()
def cancel_parsing_gcode(self):
print("Cancel presset")
if self.gcode_parser and self.gcode_parser_thread and self.gcode_parser_thread.isRunning():
self.gcode_parser.is_running = False
self.gcode_parser_thread.quit()
self.gcode_parser_thread.wait()
self.is_loaded = False
self.data = {}
self.all_data = []
self.data_keys = []
self.controller.set_progress_bar(0)
def cancel_writing_gcode(self):
print("Cancel writing gcode")
if self.gcode_copy and self.gcode_copy_thread and self.gcode_copy_thread.isRunning():
self.gcode_copy.quit()
self.gcode_copy_thread.wait()
def get_first_extruding_line_number_of_gcode_for_layers(self, layers_keys_lst):
lines_number = []
for i in layers_keys_lst:
line = self.data[i]
for o in line:
_a, _b, type, _speed, _extr, line_n = o
if 'E' in type:
lines_number.append(line_n)
break
return lines_number
def read_in_thread(self, update_progressbar_function, after_done_function):
print("reading in thread")
self.gcode_parser.moveToThread(self.gcode_parser_thread)
self.done_loading_callback = after_done_function
# connect all signals to thread class
self.gcode_parser_thread.started.connect(self.gcode_parser.load_gcode_file)
# connect all signals to parser class
self.gcode_parser.finished.connect(self.set_finished_read)
self.gcode_parser.update_progressbar=True
self.gcode_parser.set_update_progress.connect(update_progressbar_function)
self.gcode_parser.set_data_keys.connect(self.set_data_keys)
self.gcode_parser.set_data.connect(self.set_data)
self.gcode_parser.set_all_data.connect(self.set_all_data)
self.gcode_parser.set_printing_time.connect(self.set_printig_time)
self.gcode_parser_thread.start()
def read_in_realtime(self):
print("Read in realtime")
self.gcode_parser.set_data_keys.connect(self.set_data_keys)
self.gcode_parser.set_data.connect(self.set_data)
self.gcode_parser.set_all_data.connect(self.set_all_data)
self.gcode_parser.set_printing_time.connect(self.set_printig_time)
self.gcode_parser.update_progressbar=False
print("start read procedure")
self.gcode_parser.load_gcode_file()
self.is_loaded = True
def set_printig_time(self, time):
self.printing_time = time
def set_data_keys(self, data_keys):
self.data_keys = data_keys
def set_all_data(self, all_data):
self.all_data = all_data
def set_data(self, data):
self.data = data
def set_finished_read(self):
self.gcode_parser_thread.quit()
self.is_loaded = True
self.done_loading_callback()
#self.controller.set_gcode()
def set_finished_copy(self):
self.gcode_copy_thread.quit()
#print(str(self.writing_done_callback))
self.writing_done_callback()
def set_color_change_data(self, data):
self.color_change_data = data
def write_with_changes_in_thread(self, filename_in, filename_out, update_function):
self.gcode_copy.filename_in = filename_in
self.gcode_copy.filename_out = filename_out
self.gcode_copy.color_change_lst = self.color_change_data
self.gcode_copy.moveToThread(self.gcode_copy_thread)
self.gcode_copy_thread.started.connect(self.gcode_copy.write_file)
self.gcode_copy.finished.connect(self.set_finished_copy)
self.gcode_copy.set_update_progress.connect(update_function)
self.gcode_copy_thread.start()
class BisectRunner(QObject):
bisector_created = Signal(object)
running_state_changed = Signal(bool)
def __init__(self, mainwindow):
QObject.__init__(self)
self.mainwindow = mainwindow
self.bisector = None
self.thread = None
self.pending_threads = []
def bisect(self, fetch_config, options):
self.stop()
# global preferences
global_prefs = get_prefs()
# apply the global prefs now
apply_prefs(global_prefs)
self.bisector = GuiBisector(fetch_config,
persist=global_prefs['persist'])
# create a QThread, and move self.bisector in it. This will
# allow to the self.bisector slots (connected after the move)
# to be automatically called in the thread.
self.thread = QThread()
self.bisector.moveToThread(self.thread)
self.bisector.download_manager.download_progress.connect(
self.show_dl_progress)
self.bisector.test_runner.evaluate_started.connect(
self.evaluate)
self.bisector.finished.connect(self.bisection_finished)
self.bisector_created.emit(self.bisector)
if options['bisect_type'] == 'nightlies':
handler = NightlyHandler(find_fix=options['find_fix'])
start = options['start_date']
end = options['end_date']
else:
handler = InboundHandler(find_fix=options['find_fix'])
start = options['start_changeset']
end = options['end_changeset']
# options for the app launcher
launcher_kwargs = {}
for name in ('profile', 'preferences'):
if name in options:
value = options[name]
if value:
launcher_kwargs[name] = value
self.bisector.test_runner.launcher_kwargs = launcher_kwargs
self.thread.start()
self.bisector._bisect_args = (handler, start, end)
# this will be called in the worker thread.
QTimer.singleShot(0, self.bisector.bisect)
self.running_state_changed.emit(True)
@Slot()
def stop(self, wait=True):
if self.bisector:
self.bisector.finished.disconnect(self.bisection_finished)
self.bisector.download_manager.cancel()
self.bisector = None
if self.thread:
self.thread.quit()
if wait:
# wait for thread(s) completion - this is the case when
# user close the application
self.thread.wait()
for thread in self.pending_threads:
thread.wait()
else:
# do not block, just keep track of the thread - we got here
# when user cancel the bisection with the button.
self.pending_threads.append(self.thread)
self.thread.finished.connect(self._remove_pending_thread)
self.thread = None
self.running_state_changed.emit(False)
@Slot()
def _remove_pending_thread(self):
for thread in self.pending_threads[:]:
if thread.isFinished():
self.pending_threads.remove(thread)
@Slot(object, int, int)
def show_dl_progress(self, dl, current, total):
message = "downloading %s: %d/%d" % (dl.get_dest(), current, total)
self.mainwindow.ui.statusbar.showMessage(message, 2000)
@Slot()
def evaluate(self):
verdict = get_verdict(self.mainwindow)
self.bisector.test_runner.finish(verdict)
@Slot(object, int)
def bisection_finished(self, bisection, resultcode):
if resultcode == Bisection.USER_EXIT:
msg = "Bisection stopped."
dialog = QMessageBox.information
elif resultcode == Bisection.NO_DATA:
msg = "Unable to find enough data to bisect."
dialog = QMessageBox.warning
elif resultcode == Bisection.EXCEPTION:
msg = "Error: %s" % self.bisector.error[1]
dialog = QMessageBox.critical
else:
if bisection.fetch_config.can_go_inbound() and \
isinstance(bisection.handler, NightlyHandler):
# we can go on inbound, let's ask the user
if QMessageBox.question(
self.mainwindow,
"End of the bisection",
"Nightly bisection is done, but you can continue the"
" bisection on inbound builds. Contibue with inbounds ?",
QMessageBox.Yes | QMessageBox.No,
QMessageBox.Yes
) == QMessageBox.Yes:
# let's go on inbound
QTimer.singleShot(0, self.bisector.nightlies_to_inbound)
else:
# no inbound, bisection is done.
self.stop()
return
msg = "The bisection is done."
dialog = QMessageBox.information
dialog(self.mainwindow, "End of the bisection", msg)
self.stop()
class SensitiveLegendRaster(QObject):
def __init__(self):
super(SensitiveLegendRaster, self).__init__() # QThread
self.layer = self.worker = self.thread = None
self.canvas = iface.mapCanvas()
self.msgBar = iface.messageBar()
self.legend = iface.legendInterface()
self.nameModulus = "Script_Sensitive_Legend"
#
self.initThread()
self._connect()
#
self.selectLayer(iface.activeLayer())
def __del__(self):
self.finishThread()
self._connect(False)
def printMsgBar(self, msg, typeMsg=QgsMessageBar.INFO):
self.msgBar.popWidget()
if typeMsg == QgsMessageBar.INFO:
self.msgBar.pushMessage("SensitiveLegendRaster Script", msg, typeMsg)
else:
self.msgBar.pushMessage("SensitiveLegendRaster Script", msg, typeMsg, 5)
def initThread(self):
self.thread = QThread(self)
self.thread.setObjectName(self.nameModulus)
self.worker = WorkerSensitiveLegendRaster()
self.worker.moveToThread(self.thread)
self._connectWorker()
def finishThread(self):
self._connectWorker(False)
self.worker.deleteLater()
self.thread.wait()
self.thread.deleteLater()
self.thread = self.worker = None
def _connectWorker(self, isConnect=True):
ss = [
{"signal": self.thread.started, "slot": self.worker.run},
{"signal": self.worker.finished, "slot": self.finishedWorker},
{"signal": self.worker.messageResult, "slot": self.messageResultWorker},
{"signal": self.worker.messageStatus, "slot": self.messageStatusWorker},
]
if isConnect:
for item in ss:
item["signal"].connect(item["slot"])
else:
for item in ss:
item["signal"].disconnect(item["slot"])
def _connect(self, isConnect=True):
ss = [
{"signal": self.legend.currentLayerChanged, "slot": self.selectLayer},
{"signal": QgsMapLayerRegistry.instance().layerWillBeRemoved, "slot": self.unselectLayer},
{"signal": self.canvas.extentsChanged, "slot": self.changeSensitiveLegend},
]
if isConnect:
for item in ss:
item["signal"].connect(item["slot"])
else:
for item in ss:
item["signal"].disconnect(item["slot"])
@pyqtSlot()
def finishedWorker(self):
self.thread.quit()
if self.worker.isKilled: # When PAN/ZOOM/...
self.thread.wait()
self.changeSensitiveLegend()
@pyqtSlot(str)
def messageResultWorker(self, msg):
self.printMsgBar(msg)
@pyqtSlot(str)
def messageStatusWorker(self, msg):
self.printMsgBar(msg)
@pyqtSlot("QgsMapLayer")
def selectLayer(self, layer):
if self.thread.isRunning():
return
isOk = True
msg = ""
typeMsg = QgsMessageBar.WARNING
if not layer is None and layer.type() == QgsMapLayer.RasterLayer:
legendColorAll = layer.legendSymbologyItems()
if len(legendColorAll) > 0: # Had a classification
self.layer = layer
self.worker.setLegendReadBlock(layer)
msg = "Raster Layer '%s' actived" % layer.name()
typeMsg = QgsMessageBar.INFO
else:
msg = "Raster Layer '%s' need be a classification" % layer.name()
isOk = False
else:
if layer is None:
msg = "Active a Raster layer"
else:
msg = "Layer '%s' need be a Raster" % layer.name()
isOk = False
self.printMsgBar(msg, typeMsg)
return isOk
@pyqtSlot(str)
def unselectLayer(self, idLayer):
if idLayer == self.layer.id():
if self.thread.isRunning():
self.worker.isKilled = True
msg = "Raster Layer '%s' was removed" % self.layer.name()
self.printMsgBar(msg, QgsMessageBar.WARNING)
self.layer = None
@pyqtSlot()
def changeSensitiveLegend(self):
if self.layer is None:
return
if self.thread.isRunning():
self.worker.isKilled = True
return
mapSettings = self.canvas.mapSettings()
crsCanvas = mapSettings.destinationCrs()
extentCanvas = self.canvas.extent()
extentLayer = self.layer.extent()
resX = self.layer.rasterUnitsPerPixelX()
resY = self.layer.rasterUnitsPerPixelY()
if self.layer.crs() != crsCanvas:
extentCanvas = mapSettings.mapToLayerCoordinates(self.layer, extentCanvas)
if not extentCanvas.intersects(extentLayer):
self.printMsgBar("View not intersects Raster '%s'" % self.layer.name, QgsMessageBar.WARNING)
return
keysLegend = range(len(self.worker.legendAll)) # [ idClass1, idClass2, ... ] [ 0..N-1]
if extentCanvas == extentLayer or extentCanvas.contains(extentLayer):
legendsView = map(lambda x: "(%s)%s" % (x, self.worker.legendAll[x]), keysLegend)
msg = "[%d] = %s" % (len(legendsView), " ".join(legendsView))
self.printMsgBar(msg)
return
extent = extentCanvas.intersect(extentLayer)
widthRead = int(extent.width() / resX) + 1
heightRead = int(extent.height() / resY) + 1
self.worker.setProcessImage(extent, widthRead, heightRead)
self.thread.start()
class NGWResourcesModelJob(QObject):
started = pyqtSignal()
statusChanged = pyqtSignal(unicode)
warningOccurred = pyqtSignal(object)
errorOccurred = pyqtSignal(object)
finished = pyqtSignal()
def __init__(self, parent, worker, model_response=None):
"""Create job.
Arguments:
job_id -- Job identification
worker -- The class object inherits from NGWResourceModelJob
"""
QObject.__init__(self, parent)
self.__result = None
self.__worker = worker
self.__job_id = self.__worker.id
self.__error = None
self.__warnings = []
# self.__job_id = "%s_%s" % (self.__worker.id, str(uuid.uuid1()))
self.__worker.started.connect(self.started.emit)
self.__worker.dataReceived.connect(self.__rememberResult)
self.__worker.statusChanged.connect(self.statusChanged.emit)
self.__worker.errorOccurred.connect(self.processJobError)
self.__worker.warningOccurred.connect(self.processJobWarnings)
self.model_response = model_response
def setResponseObject(self, resp):
self.model_response = resp
self.model_response.job_id = self.__job_id
def __rememberResult(self, result):
self.__result = result
def getJobId(self):
return self.__job_id
def getResult(self):
return self.__result
def error(self):
return self.__error
def processJobError(self, job_error):
self.__error = job_error
self.errorOccurred.emit(job_error)
def processJobWarnings(self, job_error):
if self.model_response:
self.model_response._warnings.append(job_error)
# self.warningOccurred.emit(job_error)
def start(self):
self.__thread = QThread(self)
self.__worker.moveToThread(self.__thread)
self.__worker.finished.connect(self.finishProcess)
self.__thread.started.connect(self.__worker.run)
self.__thread.start()
def finishProcess(self):
self.__worker.started.disconnect()
self.__worker.dataReceived.disconnect()
self.__worker.statusChanged.disconnect()
self.__worker.errorOccurred.disconnect()
self.__worker.warningOccurred.disconnect()
self.__worker.finished.disconnect()
self.__thread.quit()
self.__thread.wait()
self.finished.emit()
class AbstractBuildRunner(QObject):
"""
Base class to run a build.
Create the required test runner and build manager, along with a thread
that should be used for blocking tasks.
"""
running_state_changed = Signal(bool)
worker_created = Signal(object)
worker_class = None
def __init__(self, mainwindow):
QObject.__init__(self)
self.mainwindow = mainwindow
self.thread = None
self.worker = None
self.pending_threads = []
self.test_runner = None
self.download_manager = None
self.options = None
self.stopped = False
def init_worker(self, fetch_config, options):
"""
Create and initialize the worker.
Should be subclassed to configure the worker, and should return the
worker method that should start the work.
"""
self.options = options
# global preferences
global_prefs = get_prefs()
self.global_prefs = global_prefs
# apply the global prefs now
apply_prefs(global_prefs)
if fetch_config.is_nightly():
fetch_config.set_base_url(global_prefs['archive_base_url'])
download_dir = global_prefs['persist']
if not download_dir:
download_dir = self.mainwindow.persist
persist_limit = int(
abs(global_prefs['persist_size_limit']) * 1073741824)
self.download_manager = GuiBuildDownloadManager(
download_dir, persist_limit)
self.test_runner = GuiTestRunner()
self.thread = QThread()
# options for the app launcher
launcher_kwargs = {}
for name in ('profile', 'preferences'):
if name in options:
value = options[name]
if value:
launcher_kwargs[name] = value
# add add-ons paths to the app launcher
launcher_kwargs['addons'] = options['addons']
self.test_runner.launcher_kwargs = launcher_kwargs
if options['profile_persistence'] in ('clone-first',
'reuse') or options['profile']:
launcher_kwargs['cmdargs'] = launcher_kwargs.get(
'cmdargs', []) + ['--allow-downgrade']
self.worker = self.worker_class(fetch_config, self.test_runner,
self.download_manager)
# Move self.bisector in the thread. This will
# allow to the self.bisector slots (connected after the move)
# to be automatically called in the thread.
self.worker.moveToThread(self.thread)
self.worker_created.emit(self.worker)
def start(self, fetch_config, options):
action = self.init_worker(fetch_config, options)
assert callable(action), "%s should be callable" % action
self.thread.start()
# this will be called in the worker thread.
QTimer.singleShot(0, action)
self.stopped = False
self.running_state_changed.emit(True)
@Slot()
def stop(self, wait=True):
self.stopped = True
if self.options:
if self.options['profile'] and \
self.options['profile_persistence'] == 'clone-first':
self.options['profile'].cleanup()
if self.download_manager:
self.download_manager.cancel()
if self.thread:
self.thread.quit()
if wait:
if self.download_manager:
self.download_manager.wait(raise_if_error=False)
if self.thread:
# wait for thread(s) completion - this is the case when
# user close the application
self.thread.wait()
for thread in self.pending_threads:
thread.wait()
self.thread = None
elif self.thread:
# do not block, just keep track of the thread - we got here
# when user uses the stop button.
self.pending_threads.append(self.thread)
self.thread.finished.connect(self._remove_pending_thread)
if self.test_runner:
self.test_runner.finish(None)
self.running_state_changed.emit(False)
log('Stopped')
@Slot()
def _remove_pending_thread(self):
for thread in self.pending_threads[:]:
if thread.isFinished():
self.pending_threads.remove(thread)
class private_messages(iface_gui_plugin):
VERSION_INITIAL = 0
VERSION_CURRENT = VERSION_INITIAL
def __init__(self):
super(private_messages, self).__init__()
self.options = [((u"prev_messages", u"Number of previous messages to display"), 5),
((u"enable_markdown", u"Enable Markdown annotations", self._enableMarkdownChanged), False)]
self.hidden_options = {u"ack_timeout" : 3, # seconds until message delivery is marked as timed out
u"next_msgid" : -1} # next free message ID. -1 = not initialized
self._storage = None
def get_displayed_name(self):
return u"Chat"
def activate(self):
iface_gui_plugin.activate(self)
if lunchinator_has_gui():
self._sendMessageAction = _SendMessageAction()
self._openChatAction = _OpenChatAction(self._sendMessageAction)
self._peerActions = [self._openChatAction, _BlockAction(self._sendMessageAction), self._sendMessageAction]
else:
self._peerActions = None
def create_widget(self, parent):
from private_messages.chat_history_view import ChatHistoryWidget
self._lock = loggingMutex("Private Messages", logging=get_settings().get_verbose())
from PyQt4.QtCore import QThread
from private_messages.chat_messages_handler import ChatMessagesHandler
if canUseBackgroundQThreads():
self._messagesThread = QThread()
else:
self._messagesThread = None
self._messagesHandler = ChatMessagesHandler(self.logger, self, self.hidden_options[u"ack_timeout"], self.hidden_options[u"next_msgid"])
if self._messagesThread is not None:
self._messagesHandler.moveToThread(self._messagesThread)
self._messagesThread.start()
self._messagesHandler.delayedDelivery.connect(self._delayedDelivery)
self._messagesHandler.messageIDChanged.connect(self._messageIDChanged)
self._messagesHandler.displayOwnMessage.connect(self._displayOwnMessage)
self._messagesHandler.newMessage.connect(self._displayMessage)
self._openChats = {} # mapping peer ID -> ChatDockWidget
self._history = ChatHistoryWidget(self, parent, self.logger)
return self._history
def destroy_widget(self):
for chatWindow in self._openChats.values():
chatWindow.close()
self.set_hidden_option(u"next_msgid", self._messagesHandler.getNextMessageIDForStorage(), convert=False)
self._messagesHandler.deactivate()
if self._messagesThread is not None:
self._messagesThread.quit()
self._messagesThread.wait()
self._messagesThread.deleteLater()
self._messagesThread = None
self._messagesHandler = None
self._storage = None
self._lock = None
iface_gui_plugin.destroy_widget(self)
def _enableMarkdownChanged(self, _setting, newVal):
for chatWindow in self._openChats.values():
chatWindow.getChatWidget().setMarkdownEnabled(newVal)
def extendsInfoDict(self):
return lunchinator_has_gui()
def extendInfoDict(self, infoDict):
infoDict[u"PM_v"] = self.VERSION_CURRENT
def get_peer_actions(self):
return self._peerActions
def process_event(self, cmd, value, _ip, peerInfo, _prep):
if not cmd.startswith(u"HELO_PM"):
return
peerID = peerInfo[u"ID"]
subcmd = cmd[7:]
if subcmd == u"_ACK":
self._messagesHandler.processAck(peerID, value)
elif subcmd == u"_TYPING":
if peerID in self._openChats:
self._openChats[peerID].getChatWidget().otherIsTyping()
elif subcmd == u"_CLEARED":
if peerID in self._openChats:
self._openChats[peerID].getChatWidget().otherCleared()
elif subcmd == u"_ERROR":
self._messagesHandler.processAck(peerID, value, error=True)
elif subcmd == u"":
self._messagesHandler.processMessage(peerID, value)
def getStorage(self):
if self._storage == None:
with self._lock:
if self._storage == None:
from private_messages.chat_messages_storage import ChatMessagesStorage
self._storage = ChatMessagesStorage(self.logger)
return self._storage
@loggingFunc
def _displayOwnMessage(self, otherID, msgID, recvTime, msgHTML, msgTime, status, errorMsg):
otherID = convert_string(otherID)
msgHTML = convert_string(msgHTML)
errorMsg = convert_string(errorMsg)
if recvTime == -1:
recvTime = None
if not errorMsg:
errorMsg = None
if otherID in self._openChats:
chatWindow = self._openChats[otherID]
chatWindow.getChatWidget().addOwnMessage(msgID, recvTime, msgHTML, msgTime, status, errorMsg)
def _activateChat(self, chatWindow, forceForeground=True):
chatWindow.showNormal()
if forceForeground:
chatWindow.raise_()
chatWindow.activateWindow()
return chatWindow
def _openChat(self, myName, otherName, myAvatar, otherAvatar, otherID):
from private_messages.chat_window import ChatWindow
newWindow = ChatWindow(None, self.logger, myName, otherName, myAvatar, otherAvatar, otherID, self._sendMessageAction)
newWindow.getChatWidget().setMarkdownEnabled(self.get_option(u"enable_markdown"))
newWindow.windowClosing.connect(self._chatClosed)
newWindow.getChatWidget().sendMessage.connect(self._messagesHandler.sendMessage)
newWindow.getChatWidget().typing.connect(partial(self._messagesHandler.sendTyping, otherID))
newWindow.getChatWidget().cleared.connect(partial(self._messagesHandler.sendCleared, otherID))
self._openChats[otherID] = newWindow
prevMessages = self.getStorage().getPreviousMessages(otherID, self.get_option(u"prev_messages"))
from private_messages.chat_messages_storage import ChatMessagesStorage
for row in reversed(prevMessages):
# partner, ID, own, time, status, text
isOwnMessage = row[ChatMessagesStorage.MSG_IS_OWN_MESSAGE_COL] != 0
if isOwnMessage:
newWindow.getChatWidget().addOwnMessage(row[ChatMessagesStorage.MSG_ID_COL],
row[ChatMessagesStorage.MSG_RECV_TIME_COL],
row[ChatMessagesStorage.MSG_TEXT_COL],
row[ChatMessagesStorage.MSG_TIME_COL],
row[ChatMessagesStorage.MSG_STATUS_COL])
else:
newWindow.getChatWidget().addOtherMessage(row[ChatMessagesStorage.MSG_TEXT_COL],
row[ChatMessagesStorage.MSG_TIME_COL],
row[ChatMessagesStorage.MSG_RECV_TIME_COL])
return self._activateChat(newWindow)
@loggingFunc
def _chatClosed(self, pID):
pID = convert_string(pID)
if pID in self._openChats:
chatWindow = self._openChats[pID]
chatWindow.deleteLater()
del self._openChats[pID]
else:
self.logger.error("Closed chat window was not maintained: %s", pID)
def getOpenChatAction(self):
return self._openChatAction
def openChat(self, pID, forceForeground=True):
pID = convert_string(pID)
if pID in self._openChats:
return self._activateChat(self._openChats[pID], forceForeground)
otherName = get_peers().getDisplayedPeerName(pID=pID)
if otherName == None:
self.logger.error("Could not get info of chat partner %s", pID)
return
otherAvatar = get_peers().getPeerAvatarFile(pID=pID)
myName = get_settings().get_user_name()
myAvatar = get_peers().getPeerAvatarFile(pID=get_settings().get_ID())
return self._openChat(myName, otherName, myAvatar, otherAvatar, pID)
@loggingFunc
def _delayedDelivery(self, otherID, msgID, recvTime, error, errorMessage):
otherID = convert_string(otherID)
errorMessage = convert_string(errorMessage)
if otherID in self._openChats:
chatWindow = self._openChats[otherID]
chatWindow.getChatWidget().delayedDelivery(msgID, recvTime, error, errorMessage)
@loggingFunc
def _messageIDChanged(self, otherID, oldID, newID):
otherID = convert_string(otherID)
if otherID in self._openChats:
chatWindow = self._openChats[otherID]
chatWindow.getChatWidget().messageIDChanged(oldID, newID)
@loggingFunc
def _displayMessage(self, otherID, msgHTML, msgTime, msgDict):
try:
recvTime = time()
chatWindow = self.openChat(otherID, False)
chatWindow.getChatWidget().addOtherMessage(msgHTML, msgTime, recvTime)
self._messagesHandler.receivedSuccessfully(otherID, msgHTML, msgTime, msgDict, recvTime)
except:
excType, excValue, _tb = sys.exc_info()
errorMsg = u"Error processing message (%s: %s)" % (unicode(excType.__name__), unicode(excValue))
self._messagesHandler.errorReceivingMessage(otherID, msgDict, errorMsg)
if not chatWindow.isActiveWindow():
from PyQt4.QtGui import QTextDocument
doc = QTextDocument()
doc.setHtml(msgHTML)
displayNotification(chatWindow.getChatWidget().getOtherName(),
convert_string(doc.toPlainText()),
self.logger,
chatWindow.getChatWidget().getOtherIconPath())
class remote_pictures(iface_gui_plugin):
VERSION_DB = 0
VERSION_CURRENT = VERSION_DB
def __init__(self):
super(remote_pictures, self).__init__()
self.options = [((u"min_opacity", u"Minimum opacity of controls:", self._minOpacityChanged), 20),
((u"max_opacity", u"Maximum opacity of controls:", self._maxOpacityChanged), 80),
((u"thumbnail_size", u"Thumbnail Size:", self._thumbnailSizeChanged), 150),
((u"smooth_scaling", u"Smooth scaling", self._smoothScalingChanged), False),
((u"store_locally", u"Store pictures locally", self._storeLocallyChanged), True)]
self._gui = None
self._handler = None
self._rpAction = None
def _handleOpacity(self, newValue, signal):
if newValue < 0:
newValue = 0
elif newValue > 100:
newValue = 100
if signal is not None:
signal.emit(float(newValue) / 100.)
return newValue
def _minOpacityChanged(self, _setting, newValue):
return self._handleOpacity(newValue, None if self._gui is None else self._gui.minOpacityChanged)
def _maxOpacityChanged(self, _setting, newValue):
return self._handleOpacity(newValue, None if self._gui is None else self._gui.maxOpacityChanged)
def _thumbnailSizeChanged(self, _setting, newValue):
from remote_pictures.remote_pictures_category_model import CategoriesModel
if newValue < CategoriesModel.MIN_THUMBNAIL_SIZE:
newValue = CategoriesModel.MIN_THUMBNAIL_SIZE
elif newValue > CategoriesModel.MAX_THUMBNAIL_SIZE:
newValue = CategoriesModel.MAX_THUMBNAIL_SIZE
if self._gui is not None:
self._gui.thumbnailSizeChanged(newValue)
if self._handler is not None:
self._handler.thumbnailSizeChanged(newValue)
return newValue
def _storeLocallyChanged(self, _setting, newValue):
self._handler.storeLocallyChanged(newValue)
return newValue
def _smoothScalingChanged(self, _setting, newValue):
if self._gui is not None:
self._gui.setSmoothScaling(newValue)
def create_widget(self, parent):
from PyQt4.QtCore import QThread
from remote_pictures.remote_pictures_gui import RemotePicturesGui
from remote_pictures.remote_pictures_handler import RemotePicturesHandler
super(remote_pictures, self).create_widget(parent)
self._gui = RemotePicturesGui(parent,
self.logger,
self.get_option(u"smooth_scaling"),
self.get_option(u"min_opacity"),
self.get_option(u"max_opacity"))
if canUseBackgroundQThreads():
self._messagesThread = QThread()
else:
self._messagesThread = None
self._handler = RemotePicturesHandler(self.logger,
self.get_option(u"thumbnail_size"),
self.get_option(u"store_locally"),
self._gui)
if self._messagesThread is not None:
self._handler.moveToThread(self._messagesThread)
self._messagesThread.start()
self._gui.openCategory.connect(self._handler.openCategory)
self._gui.displayPrev.connect(self._handler.displayPrev)
self._gui.displayNext.connect(self._handler.displayNext)
self._gui.pictureDownloaded.connect(self._handler.pictureDownloaded)
self._gui.setCategoryThumbnail.connect(self._handler.setCategoryThumbnail)
self._handler.addCategory.connect(self._gui.categoryModel.addCategory)
self._handler.categoryThumbnailChanged.connect(self._gui.categoryModel.categoryThumbnailChanged)
self._handler.displayImageInGui.connect(self._gui.displayImage)
self._gui.categoryModel.categoriesChanged.connect(self._privacySettingsChanged)
self._handler.categoriesChanged.connect(self._privacySettingsChanged)
self._handler.loadPictures()
return self._gui
def destroy_widget(self):
if self._gui is not None and self._handler is not None:
self._gui.openCategory.disconnect(self._handler.openCategory)
self._gui.displayPrev.disconnect(self._handler.displayPrev)
self._gui.displayNext.disconnect(self._handler.displayNext)
self._gui.pictureDownloaded.disconnect(self._handler.pictureDownloaded)
self._gui.setCategoryThumbnail.disconnect(self._handler.setCategoryThumbnail)
self._handler.addCategory.disconnect(self._gui.categoryModel.addCategory)
self._handler.categoryThumbnailChanged.disconnect(self._gui.categoryModel.categoryThumbnailChanged)
self._handler.displayImageInGui.disconnect(self._gui.displayImage)
if self._gui is not None:
self._gui.categoryModel.categoriesChanged.disconnect(self._privacySettingsChanged)
self._gui.destroyWidget()
if self._handler is not None:
self._handler.categoriesChanged.disconnect(self._privacySettingsChanged)
self._handler.finish()
if self._messagesThread is not None:
self._messagesThread.quit()
self._messagesThread.wait()
self._messagesThread.deleteLater()
iface_gui_plugin.destroy_widget(self)
def extendsInfoDict(self):
return lunchinator_has_gui()
def extendInfoDict(self, infoDict):
infoDict[u"RP_v"] = self.VERSION_CURRENT
def get_peer_actions(self):
if lunchinator_has_gui():
self._rpAction = _RemotePictureAction()
return [self._rpAction]
else:
return None
def checkCategory(self, cat):
if self._handler is not None:
self._handler.checkCategory(cat)
def process_event(self, cmd, value, ip, _info, _prep):
if cmd=="HELO_REMOTE_PIC":
if self._handler is not None:
self._handler.processRemotePicture(value, ip)
def getCategories(self):
if self._handler is None:
self.logger.error("Remote Pictures not initialized")
return []
return self._handler.getCategoryNames(alsoEmpty=True)
def getCategoryIcon(self, category):
if self._gui is None:
self.logger.error("Remote Pictures not initialized")
return None
return self._gui.getCategoryIcon(category)
def willIgnorePeerAction(self, category, url):
return self._handler.willIgnorePeerAction(category, url)
def sendRemotePicture(self, peerID, peerInfo, parent):
from remote_pictures.remote_pictures_dialog import RemotePicturesDialog
dialog = RemotePicturesDialog(parent, peerID, peerInfo)
result = dialog.exec_()
if result == RemotePicturesDialog.Accepted:
data = [dialog.getURL().encode('utf-8')]
if dialog.getDescription():
data.append(dialog.getDescription().encode('utf-8'))
if dialog.getCategory():
data.append(dialog.getCategory().encode('utf-8'))
with contextlib.closing(StringIO()) as strOut:
writer = csv.writer(strOut, delimiter = ' ', quotechar = '"')
writer.writerow(data)
get_server().call("HELO_REMOTE_PIC " + strOut.getvalue(), peerIDs=[peerID])
@loggingFunc
def _privacySettingsChanged(self):
get_notification_center().emitPrivacySettingsChanged(self._rpAction.getPluginName(), self._rpAction.getName())
class Measurement(QObject):
throwMessage = pyqtSignal(str, int, name='throwMessage')
sigSaveMeasurement = pyqtSignal(bool, name='save')
updateWindows=pyqtSignal(str,name="updateView")
sigUpdateCountrate=pyqtSignal(int,str)
sigTest=pyqtSignal()
def __init__(self,openFile=None,themisApp=None):
QObject.__init__(self)
self.themisApp=themisApp
self.configWidget=configurationWidget.configurationWidget(self)
self.config=self.configWidget.p
self.DataThread=QThread(self)
self.dataHandler=DataHandler(self.configWidget.toDict())
self.dataHandler.moveToThread(self.DataThread)
self.dataHandler.updateTimer.timeout.connect(self.dataHandler.updateGui)
self.dataHandler.sigUpdateGui.connect(self.updateView,QtCore.Qt.QueuedConnection)
self.configWidget.sigConfigChanged.connect(self.dataHandler.configChanged,QtCore.Qt.QueuedConnection)
self.DataThread.start()
self.viewer=DataViewer(name="Measurement")
self.timeFilter=[None,None]
self.acquisitionTime=-1
#SetWindows
self.viewer.addWidget("Control",self.configWidget,position="left",Size=(2,2),minSize=(250,250),sizePolicy=(QtGui.QSizePolicy.Fixed,QtGui.QSizePolicy.Fixed))
self.timeImage=self.viewer.addWidget("Time Image",PlotBase.TimeImageWidget(self),position="right",relativeTo="Control",Size=(10,10),minSize=(300,250))
self.energyImage=self.viewer.addWidget("Energy Image",PlotBase.EnergyImageWidget(self),position="below",relativeTo="Time Image",Size=(10,10),minSize=(300,250))
self.countrate=self.viewer.addWidget("Countrate",PlotBase.CountrateWidget(),position="bottom",relativeTo="Time Image",Size=(10,10),minSize=(300,250))
self.keithley=self.viewer.addWidget("Keithley",PlotBase.KeithleyWidget(),position="below",relativeTo="Countrate",Size=(10,10),minSize=(300,250))
self.timeHistogram=self.viewer.addWidget("Time Histogram",PlotBase.TimeHistogramWidget(),position="right",relativeTo="Time Image",Size=(10,10),minSize=(300,250))
self.energyHistogram=self.viewer.addWidget("Energy Histogram",PlotBase.EnergyHistogramWidget(self),position="below",relativeTo="Time Histogram",Size=(10,10),minSize=(300,250))
if themisApp!=None:
self.liveView=self.viewer.addWidget("MCP",PlotBase.LiveView(self),position="above",relativeTo="Time Image",Size=(10,10),minSize=(400,250))
self.viewer.addWidget("Themis",self.themisApp,position="above",relativeTo="Control",Size=(10,10),minSize=(250,250))
# Buttons=QtGui.QHBoxLayout()
# self.start=QtGui.QPushButton("Start")
# self.start.setIcon(QtGui.QIcon('Bilder/accept.png'))
# #self.start.clicked.connect(self.startMeasurement)
# Buttons.addWidget(self.start)
# self.pause=QtGui.QPushButton("Pause")
# self.pause.setIcon(QtGui.QIcon('Bilder/pause.png'))
# #self.pause.clicked.connect(self.pauseMeasurement)
# Buttons.addWidget(self.pause)
# self.stop=QtGui.QPushButton("Stop")
# self.stop.setIcon(QtGui.QIcon('Bilder/stop.png'))
# #self.stop.clicked.connect(self.on_stop_clicked)
# Buttons.addWidget(self.stop)
# #self.configWidget.layout().insertWidget(0,Buttons)
else:
self.liveView=None #None#self.viewer.addWidget("MCP",PlotBase.LiveView(),position="above",relativeTo="Time Image",Size=(10,10),minSize=(400,250))
if not openFile==None:
self.loadMeasurement(openFile)
self.initializeSignals()
def finalize(self):
self.dataHandler.finalize()
self.dataHandler.deleteLater()
del self.dataHandler
self.DataThread.quit()
self.DataThread.wait()
#self.dataHandler.updateTimer.timeout.disconnect(self.dataHandler.updateGui)
#self.dataHandler.sigUpdateGui.disconnect(self.updateView)
#self.configWidget.sigConfigChanged.disconnect(self.dataHandler.configChanged,)
#self.dataHandler.deleteLater()
def initializeSignals(self):
self.configWidget.connectSignal(self.config.param("Spectra","Time Histogram","Time min").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("Spectra","Time Histogram","Time max").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("Spectra","Time Histogram","Time resolution").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("Spectra","Time Image","Xbins").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("Spectra","Time Image","Ybins").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("Spectra","Rotate MCP").sigValueChanged,self.dataHandler.rotationChanged)
self.configWidget.connectSignal(self.config.param("DLLParams","X Min").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("DLLParams","X Max").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("DLLParams","Y Min").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param("DLLParams","Y Max").sigValueChanged,self.timeConfigChanged)
self.configWidget.connectSignal(self.config.param('File Configuration', 'Save Measurement').sigActivated,self.saveMeasurement)
self.configWidget.connectSignal(self.config.param('Spectra', 'Create new Conversion').sigActivated,self.createStandardConversion)
self.sigSaveMeasurement.connect(self.saveMeasurement)
self.timeHistogram.selectionChanged.connect(self.selectionChanged)
def selectionChanged(self,min,max):
with self.dataHandler:
self.dataHandler.dataSet.timeImage.fill(0)
electrons=self.dataHandler.dataSet.getElectronsFromRawData()
if min==-999999999:
timeFilter=(None,None)
else:
timeFilter=(self.dataHandler.dataSet.unitsToRawData(min,"T"),self.dataHandler.dataSet.unitsToRawData(max,"T"))
if not timeFilter[0]==None and not timeFilter[1]==None:
electrons = electrons[np.logical_and(electrons["time"] > timeFilter[0], electrons["time"] < timeFilter[1])]
elif not timeFilter[0]==None:
electrons = electrons[electrons["time"] > timeFilter[0]]
elif not timeFilter[1]==None:
electrons = electrons[electrons["time"] < timeFilter[1]]
self.dataHandler.dataSet.setElectrons(electrons=electrons,spectrum="timeImage")
self.updateView({"timeImage":np.copy(self.dataHandler.dataSet.timeImage)})
def timeConfigChanged(self):
with self.dataHandler:
if not self.dataHandler.dataSet.rawData==None:
self.dataHandler.dataSet.setTimeRange()
self.dataHandler.dataSet.setTimeImageRange()
electrons=self.dataHandler.dataSet.getElectronsFromRawData()
self.dataHandler.dataSet.setElectrons(electrons=electrons,spectrum=["timeHistogram","timeImage"])
self.dataHandler.dataTransfer(["timeHistogram","timeImage"])
else:
self.dataHandler.dataSet.initialize()
self.dataHandler.sigUpdateRequest.emit(["all"])
def updateView(self, data=None):
if data==None:
self.dataHandler.sigUpdateRequest.emit("all")
return
if "timeHistogram" in data:
self.timeHistogram.updateData(data["timeHistogram"][0],data["timeHistogram"][1])
if "energyHistogram" in data:
self.energyHistogram.updateData(data["energyHistogram"][0],data["energyHistogram"][1])
if "timeImage" in data:
self.timeImage.updateData(data["timeImage"])
if "energyImage" in data:
self.energyImage.updateData(data["energyImage"])
if "countrate" in data:
self.countrate.updateData(data["countrate"][0],data["countrate"][1])
if "keithley" in data:
self.keithley.updateData(data["keithley"][0],data["keithley"][1])
if "liveView" in data:
if self.liveView!=None:
self.liveView.updateData(data["liveView"][0])
self.liveView.countrate.setValue(data["liveView"][1])
self.liveView.selection.setValue(data["liveView"][2])
def setDLDParameter(self,factors,offsets,pxLimits): #set from dld
self.configWidget.setDLLParams(factors=factors,offsets=offsets,pxLimits=pxLimits)
def createConversion(self,dialog=False,recommended=False):
conversion=EnergyConversion.ConversionItem(self.dataHandler.dataSet,self.configWidget)
with self.dataHandler:
if not self.dataHandler.dataSet.rawData==None: conversion.control.state.getEventData()._data=self.dataHandler.dataSet.getElectronsFromRawData()
if dialog:
newconversion=conversion.startConversionDialog()
else:
self.throwMessage.emit("Create ConversionSplines",2)
newconversion=conversion.createStandardConversion(recommended=recommended)
self.throwMessage.emit("--> Finished",4)
if newconversion==None: return
self.configWidget.setEnergyParams(newconversion.factors,newconversion.offsets)
with self.dataHandler:
self.dataHandler.dataSet.conversion=conversion
self.dataHandler.dataSet.energyHistogram=np.sum(np.sum(newconversion.getDataContent(),0),0)
self.dataHandler.dataSet.energyImage=np.sum(newconversion.getDataContent(),2)
self.dataHandler.dataSet.setEnergyRange()
self.energyImage.setExtent()
self.dataHandler.sigUpdateRequest.emit(["energyHistogram","energyImage"])
def startConversionDialog(self):
self.createConversion(dialog=True)
def createStandardConversion(self):
self.createConversion()
def clearSpectra(self,rawData=True):
QtCore.QMetaObject.invokeMethod(self.dataHandler,"clearSpectra",QtCore.Qt.QueuedConnection,QtCore.Q_ARG(bool,True))
# with self.dataHandler:
#
# self.dataHandler.dataSet.clearSpectra()
# self.dataHandler.electrons=np.empty(0, [("x", 'i2'), ("y", 'i2'), ("time", 'i4')])
# if rawData:
# self.dataHandler.closeRawData()
# self.dataHandler.sigUpdateRequest.emit(["all"])
def saveMeasurement(self,confirm=True,autoOverride=False):
path=self.config["File Configuration","Folder"]
if path=="Default": path=fileaccess.createDefaultPath(self.config["File Configuration","Folder","Beamtime"],self.config["File Configuration","Folder","Groupname"])
else: path=self.config["File Configuration","Folder","Custom Folder"]
if not fileaccess.checkIfPathExist(path):
self.throwMessage.emit("--> Could not create the desired Path",0)
self.throwMessage.emit("--> Measurement was not Saved",2)
return False
filename=self.config["File Configuration","Filename"]
if self.themisApp!=None:
filename=filename.replace("%n",("%03d"% self.themisApp.parent.joblist.measurementNumber.value()))
self.themisApp.parent.joblist.measurementNumber.setValue(self.themisApp.parent.joblist.measurementNumber.value()+1)
file=path+"/"+filename+".lv"
if not autoOverride:
if fileaccess.checkIfFileExists(file):
file=fileaccess.fileOverwriteDialog(file,path)
if file==None:
self.throwMessage.emit("--> Measurement was not Saved",2)
return False
self.throwMessage.emit("Save Measurement as: "+file,2)
file=file.replace("/","\\")
with self.dataHandler:
if not self.dataHandler.dataSet.rawData==None and self.dataHandler.dataSet.rawData.filename.replace("/","\\")==file.replace("/","\\"):
file=file+"_temporay_while_edited"
h5file = fileaccess.openFile(file, mode = "w", title = "Measurement")
##! Adjust and Save Config
config=self.config.saveState()
config["children"]["File Configuration"]["children"]["Folder"]["children"]["Custom Folder"]["value"]=path
config["children"]["File Configuration"]["children"]["Folder"]["value"]="Custom"
config["children"]["File Configuration"]["children"]["Filename"]["value"]=filename
if config["children"]["Measurement Info"]["children"]["End of Acquisition"]["value"]=="not yet finished":
config["children"]["Measurement Info"]["children"]["End of Acquisition"]["value"]=datetime.datetime.now().strftime("%Y-%m-%d, %H:%M:%S")
h5file.root._v_attrs.config=str(config)
self.dataHandler.dataSet.saveDataSet(h5file)
h5file.flush()
if "_temporay_while_edited" in file:
self.dataHandler.dataSet.rawData.close()
_cwd=os.getcwd()
os.chdir(path)
name=file.split("\\")[-1]
os.remove(file[0:-22])
h5file.close()
os.rename(name,name[0:-22])
self.dataHandler.dataSet.rawData=fileaccess.openFile(file[0:-22], mode = "a")
self.dataHandler.dataSet.events=self.dataHandler.dataSet.rawData.getNode("/rawData/", "events")
else:
h5file.close()
if self.config["File Configuration","Copy to Grouphome"]:
grouphome=path.replace("C:/","Z:/")
if grouphome==path: return
try:
fileaccess.checkIfPathExist(grouphome,create=True)
shutil.copy(file,grouphome)
except(WindowsError):
self.throwMessage.emit("Error: Could not connect to Grouphome",2)
if confirm:
msgBox=QtGui.QMessageBox(self.viewer)
msgBox.setWindowTitle("Measurement Saved")
msgBox.setText("Measurement has been saved to:")
msgBox.setInformativeText(file)
msgBox.exec_()
@staticmethod
def loadMeasurement(file,mode="r"):
measurement=Measurement()
measurement.load(file,mode=mode)
return(measurement)
def load(self,file,mode="r"):
self.viewer.setWindowTitle("Data Viewer - "+ file)
if not fileaccess.checkIfFileExists(file):
self.throwMessage.emit("Load Error: File "+file+" not found",0)
return
h5file = fileaccess.openFile(file, mode = mode)
h5file =self.configWidget.restoreState(h5file,file=file)
with self.dataHandler:
self.dataHandler.dataSet.config=self.configWidget.toDict()
self.dataHandler.dataSet.loadDataSet(h5file)
self.timeImage.setExtent()
self.energyImage.setExtent()
self.dataHandler.sigUpdateRequest.emit(["all"])
def show(self):
self.viewer.show()
class Measurement(QObject):
throwMessage = pyqtSignal(str, int, name='throwMessage')
sigSaveMeasurement = pyqtSignal(bool, name='save')
updateWindows = pyqtSignal(str, name="updateView")
sigUpdateCountrate = pyqtSignal(int, str)
sigTest = pyqtSignal()
def __init__(self, openFile=None, themisApp=None):
QObject.__init__(self)
self.themisApp = themisApp
self.configWidget = configurationWidget.configurationWidget(self)
self.config = self.configWidget.p
self.DataThread = QThread(self)
self.dataHandler = DataHandler(self.configWidget.toDict())
self.dataHandler.moveToThread(self.DataThread)
self.dataHandler.updateTimer.timeout.connect(
self.dataHandler.updateGui)
self.dataHandler.sigUpdateGui.connect(self.updateView,
QtCore.Qt.QueuedConnection)
self.configWidget.sigConfigChanged.connect(
self.dataHandler.configChanged, QtCore.Qt.QueuedConnection)
self.DataThread.start()
self.viewer = DataViewer(name="Measurement")
self.timeFilter = [None, None]
self.acquisitionTime = -1
#SetWindows
self.viewer.addWidget("Control",
self.configWidget,
position="left",
Size=(2, 2),
minSize=(250, 250),
sizePolicy=(QtGui.QSizePolicy.Fixed,
QtGui.QSizePolicy.Fixed))
self.timeImage = self.viewer.addWidget("Time Image",
PlotBase.TimeImageWidget(self),
position="right",
relativeTo="Control",
Size=(10, 10),
minSize=(300, 250))
self.energyImage = self.viewer.addWidget(
"Energy Image",
PlotBase.EnergyImageWidget(self),
position="below",
relativeTo="Time Image",
Size=(10, 10),
minSize=(300, 250))
self.countrate = self.viewer.addWidget("Countrate",
PlotBase.CountrateWidget(),
position="bottom",
relativeTo="Time Image",
Size=(10, 10),
minSize=(300, 250))
self.keithley = self.viewer.addWidget("Keithley",
PlotBase.KeithleyWidget(),
position="below",
relativeTo="Countrate",
Size=(10, 10),
minSize=(300, 250))
self.timeHistogram = self.viewer.addWidget(
"Time Histogram",
PlotBase.TimeHistogramWidget(),
position="right",
relativeTo="Time Image",
Size=(10, 10),
minSize=(300, 250))
self.energyHistogram = self.viewer.addWidget(
"Energy Histogram",
PlotBase.EnergyHistogramWidget(self),
position="below",
relativeTo="Time Histogram",
Size=(10, 10),
minSize=(300, 250))
if themisApp != None:
self.liveView = self.viewer.addWidget("MCP",
PlotBase.LiveView(self),
position="above",
relativeTo="Time Image",
Size=(10, 10),
minSize=(400, 250))
self.viewer.addWidget("Themis",
self.themisApp,
position="above",
relativeTo="Control",
Size=(10, 10),
minSize=(250, 250))
# Buttons=QtGui.QHBoxLayout()
# self.start=QtGui.QPushButton("Start")
# self.start.setIcon(QtGui.QIcon('Bilder/accept.png'))
# #self.start.clicked.connect(self.startMeasurement)
# Buttons.addWidget(self.start)
# self.pause=QtGui.QPushButton("Pause")
# self.pause.setIcon(QtGui.QIcon('Bilder/pause.png'))
# #self.pause.clicked.connect(self.pauseMeasurement)
# Buttons.addWidget(self.pause)
# self.stop=QtGui.QPushButton("Stop")
# self.stop.setIcon(QtGui.QIcon('Bilder/stop.png'))
# #self.stop.clicked.connect(self.on_stop_clicked)
# Buttons.addWidget(self.stop)
# #self.configWidget.layout().insertWidget(0,Buttons)
else:
self.liveView = None #None#self.viewer.addWidget("MCP",PlotBase.LiveView(),position="above",relativeTo="Time Image",Size=(10,10),minSize=(400,250))
if not openFile == None:
self.loadMeasurement(openFile)
self.initializeSignals()
def finalize(self):
self.dataHandler.finalize()
self.dataHandler.deleteLater()
del self.dataHandler
self.DataThread.quit()
self.DataThread.wait()
#self.dataHandler.updateTimer.timeout.disconnect(self.dataHandler.updateGui)
#self.dataHandler.sigUpdateGui.disconnect(self.updateView)
#self.configWidget.sigConfigChanged.disconnect(self.dataHandler.configChanged,)
#self.dataHandler.deleteLater()
def initializeSignals(self):
self.configWidget.connectSignal(
self.config.param("Spectra", "Time Histogram",
"Time min").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("Spectra", "Time Histogram",
"Time max").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("Spectra", "Time Histogram",
"Time resolution").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("Spectra", "Time Image",
"Xbins").sigValueChanged, self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("Spectra", "Time Image",
"Ybins").sigValueChanged, self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("Spectra", "Rotate MCP").sigValueChanged,
self.dataHandler.rotationChanged)
self.configWidget.connectSignal(
self.config.param("DLLParams", "X Min").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("DLLParams", "X Max").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("DLLParams", "Y Min").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param("DLLParams", "Y Max").sigValueChanged,
self.timeConfigChanged)
self.configWidget.connectSignal(
self.config.param('File Configuration',
'Save Measurement').sigActivated,
self.saveMeasurement)
self.configWidget.connectSignal(
self.config.param('Spectra', 'Create new Conversion').sigActivated,
self.createStandardConversion)
self.sigSaveMeasurement.connect(self.saveMeasurement)
self.timeHistogram.selectionChanged.connect(self.selectionChanged)
def selectionChanged(self, min, max):
with self.dataHandler:
self.dataHandler.dataSet.timeImage.fill(0)
electrons = self.dataHandler.dataSet.getElectronsFromRawData()
if min == -999999999:
timeFilter = (None, None)
else:
timeFilter = (self.dataHandler.dataSet.unitsToRawData(
min,
"T"), self.dataHandler.dataSet.unitsToRawData(max, "T"))
if not timeFilter[0] == None and not timeFilter[1] == None:
electrons = electrons[np.logical_and(
electrons["time"] > timeFilter[0],
electrons["time"] < timeFilter[1])]
elif not timeFilter[0] == None:
electrons = electrons[electrons["time"] > timeFilter[0]]
elif not timeFilter[1] == None:
electrons = electrons[electrons["time"] < timeFilter[1]]
self.dataHandler.dataSet.setElectrons(electrons=electrons,
spectrum="timeImage")
self.updateView(
{"timeImage": np.copy(self.dataHandler.dataSet.timeImage)})
def timeConfigChanged(self):
with self.dataHandler:
if not self.dataHandler.dataSet.rawData == None:
self.dataHandler.dataSet.setTimeRange()
self.dataHandler.dataSet.setTimeImageRange()
electrons = self.dataHandler.dataSet.getElectronsFromRawData()
self.dataHandler.dataSet.setElectrons(
electrons=electrons,
spectrum=["timeHistogram", "timeImage"])
self.dataHandler.dataTransfer(["timeHistogram", "timeImage"])
else:
self.dataHandler.dataSet.initialize()
self.dataHandler.sigUpdateRequest.emit(["all"])
def updateView(self, data=None):
if data == None:
self.dataHandler.sigUpdateRequest.emit("all")
return
if "timeHistogram" in data:
self.timeHistogram.updateData(data["timeHistogram"][0],
data["timeHistogram"][1])
if "energyHistogram" in data:
self.energyHistogram.updateData(data["energyHistogram"][0],
data["energyHistogram"][1])
if "timeImage" in data:
self.timeImage.updateData(data["timeImage"])
if "energyImage" in data:
self.energyImage.updateData(data["energyImage"])
if "countrate" in data:
self.countrate.updateData(data["countrate"][0],
data["countrate"][1])
if "keithley" in data:
self.keithley.updateData(data["keithley"][0], data["keithley"][1])
if "liveView" in data:
if self.liveView != None:
self.liveView.updateData(data["liveView"][0])
self.liveView.countrate.setValue(data["liveView"][1])
self.liveView.selection.setValue(data["liveView"][2])
def setDLDParameter(self, factors, offsets, pxLimits): #set from dld
self.configWidget.setDLLParams(factors=factors,
offsets=offsets,
pxLimits=pxLimits)
def createConversion(self, dialog=False, recommended=False):
conversion = EnergyConversion.ConversionItem(self.dataHandler.dataSet,
self.configWidget)
with self.dataHandler:
if not self.dataHandler.dataSet.rawData == None:
conversion.control.state.getEventData(
)._data = self.dataHandler.dataSet.getElectronsFromRawData()
if dialog:
newconversion = conversion.startConversionDialog()
else:
self.throwMessage.emit("Create ConversionSplines", 2)
newconversion = conversion.createStandardConversion(
recommended=recommended)
self.throwMessage.emit("--> Finished", 4)
if newconversion == None: return
self.configWidget.setEnergyParams(newconversion.factors,
newconversion.offsets)
with self.dataHandler:
self.dataHandler.dataSet.conversion = conversion
self.dataHandler.dataSet.energyHistogram = np.sum(
np.sum(newconversion.getDataContent(), 0), 0)
self.dataHandler.dataSet.energyImage = np.sum(
newconversion.getDataContent(), 2)
self.dataHandler.dataSet.setEnergyRange()
self.energyImage.setExtent()
self.dataHandler.sigUpdateRequest.emit(
["energyHistogram", "energyImage"])
def startConversionDialog(self):
self.createConversion(dialog=True)
def createStandardConversion(self):
self.createConversion()
def clearSpectra(self, rawData=True):
QtCore.QMetaObject.invokeMethod(self.dataHandler, "clearSpectra",
QtCore.Qt.QueuedConnection,
QtCore.Q_ARG(bool, True))
# with self.dataHandler:
#
# self.dataHandler.dataSet.clearSpectra()
# self.dataHandler.electrons=np.empty(0, [("x", 'i2'), ("y", 'i2'), ("time", 'i4')])
# if rawData:
# self.dataHandler.closeRawData()
# self.dataHandler.sigUpdateRequest.emit(["all"])
def saveMeasurement(self, confirm=True, autoOverride=False):
path = self.config["File Configuration", "Folder"]
if path == "Default":
path = fileaccess.createDefaultPath(
self.config["File Configuration", "Folder", "Beamtime"],
self.config["File Configuration", "Folder", "Groupname"])
else:
path = self.config["File Configuration", "Folder", "Custom Folder"]
if not fileaccess.checkIfPathExist(path):
self.throwMessage.emit("--> Could not create the desired Path", 0)
self.throwMessage.emit("--> Measurement was not Saved", 2)
return False
filename = self.config["File Configuration", "Filename"]
if self.themisApp != None:
filename = filename.replace(
"%n",
("%03d" %
self.themisApp.parent.joblist.measurementNumber.value()))
self.themisApp.parent.joblist.measurementNumber.setValue(
self.themisApp.parent.joblist.measurementNumber.value() + 1)
file = path + "/" + filename + ".lv"
if not autoOverride:
if fileaccess.checkIfFileExists(file):
file = fileaccess.fileOverwriteDialog(file, path)
if file == None:
self.throwMessage.emit("--> Measurement was not Saved", 2)
return False
self.throwMessage.emit("Save Measurement as: " + file, 2)
file = file.replace("/", "\\")
with self.dataHandler:
if not self.dataHandler.dataSet.rawData == None and self.dataHandler.dataSet.rawData.filename.replace(
"/", "\\") == file.replace("/", "\\"):
file = file + "_temporay_while_edited"
h5file = fileaccess.openFile(file, mode="w", title="Measurement")
##! Adjust and Save Config
config = self.config.saveState()
config["children"]["File Configuration"]["children"]["Folder"][
"children"]["Custom Folder"]["value"] = path
config["children"]["File Configuration"]["children"]["Folder"][
"value"] = "Custom"
config["children"]["File Configuration"]["children"]["Filename"][
"value"] = filename
if config["children"]["Measurement Info"]["children"][
"End of Acquisition"]["value"] == "not yet finished":
config["children"]["Measurement Info"]["children"][
"End of Acquisition"]["value"] = datetime.datetime.now(
).strftime("%Y-%m-%d, %H:%M:%S")
h5file.root._v_attrs.config = str(config)
self.dataHandler.dataSet.saveDataSet(h5file)
h5file.flush()
if "_temporay_while_edited" in file:
self.dataHandler.dataSet.rawData.close()
_cwd = os.getcwd()
os.chdir(path)
name = file.split("\\")[-1]
os.remove(file[0:-22])
h5file.close()
os.rename(name, name[0:-22])
self.dataHandler.dataSet.rawData = fileaccess.openFile(
file[0:-22], mode="a")
self.dataHandler.dataSet.events = self.dataHandler.dataSet.rawData.getNode(
"/rawData/", "events")
else:
h5file.close()
if self.config["File Configuration", "Copy to Grouphome"]:
grouphome = path.replace("C:/", "Z:/")
if grouphome == path: return
try:
fileaccess.checkIfPathExist(grouphome, create=True)
shutil.copy(file, grouphome)
except (WindowsError):
self.throwMessage.emit(
"Error: Could not connect to Grouphome", 2)
if confirm:
msgBox = QtGui.QMessageBox(self.viewer)
msgBox.setWindowTitle("Measurement Saved")
msgBox.setText("Measurement has been saved to:")
msgBox.setInformativeText(file)
msgBox.exec_()
@staticmethod
def loadMeasurement(file, mode="r"):
measurement = Measurement()
measurement.load(file, mode=mode)
return (measurement)
def load(self, file, mode="r"):
self.viewer.setWindowTitle("Data Viewer - " + file)
if not fileaccess.checkIfFileExists(file):
self.throwMessage.emit("Load Error: File " + file + " not found",
0)
return
h5file = fileaccess.openFile(file, mode=mode)
h5file = self.configWidget.restoreState(h5file, file=file)
with self.dataHandler:
self.dataHandler.dataSet.config = self.configWidget.toDict()
self.dataHandler.dataSet.loadDataSet(h5file)
self.timeImage.setExtent()
self.energyImage.setExtent()
self.dataHandler.sigUpdateRequest.emit(["all"])
def show(self):
self.viewer.show()
class AbstractBuildRunner(QObject):
"""
Base class to run a build.
Create the required test runner and build manager, along with a thread
that should be used for blocking tasks.
"""
running_state_changed = Signal(bool)
worker_created = Signal(object)
worker_class = None
def __init__(self, mainwindow):
QObject.__init__(self)
self.mainwindow = mainwindow
self.thread = None
self.worker = None
self.pending_threads = []
self.test_runner = None
self.download_manager = None
self.options = None
self.stopped = False
def init_worker(self, fetch_config, options):
"""
Create and initialize the worker.
Should be subclassed to configure the worker, and should return the
worker method that should start the work.
"""
self.options = options
# global preferences
global_prefs = get_prefs()
self.global_prefs = global_prefs
# apply the global prefs now
apply_prefs(global_prefs)
download_dir = global_prefs['persist']
if not download_dir:
download_dir = self.mainwindow.persist
persist_limit = int(abs(global_prefs['persist_size_limit']) *
1073741824)
self.download_manager = GuiBuildDownloadManager(download_dir,
persist_limit)
self.test_runner = GuiTestRunner()
self.thread = QThread()
# options for the app launcher
launcher_kwargs = {}
for name in ('profile', 'preferences'):
if name in options:
value = options[name]
if value:
launcher_kwargs[name] = value
# add add-ons paths to the app launcher
launcher_kwargs['addons'] = options['addons']
self.test_runner.launcher_kwargs = launcher_kwargs
self.worker = self.worker_class(fetch_config, self.test_runner,
self.download_manager)
# Move self.bisector in the thread. This will
# allow to the self.bisector slots (connected after the move)
# to be automatically called in the thread.
self.worker.moveToThread(self.thread)
self.worker_created.emit(self.worker)
def start(self, fetch_config, options):
action = self.init_worker(fetch_config, options)
assert callable(action), "%s should be callable" % action
self.thread.start()
# this will be called in the worker thread.
QTimer.singleShot(0, action)
self.stopped = False
self.running_state_changed.emit(True)
@Slot()
def stop(self, wait=True):
self.stopped = True
if self.options:
if self.options['profile'] and \
self.options['profile_persistence'] == 'clone-first':
self.options['profile'].cleanup()
if self.download_manager:
self.download_manager.cancel()
if self.thread:
self.thread.quit()
if wait:
if self.download_manager:
self.download_manager.wait(raise_if_error=False)
if self.thread:
# wait for thread(s) completion - this is the case when
# user close the application
self.thread.wait()
for thread in self.pending_threads:
thread.wait()
self.thread = None
elif self.thread:
# do not block, just keep track of the thread - we got here
# when user uses the stop button.
self.pending_threads.append(self.thread)
self.thread.finished.connect(self._remove_pending_thread)
if self.test_runner:
self.test_runner.finish(None)
self.running_state_changed.emit(False)
log('Stopped')
@Slot()
def _remove_pending_thread(self):
for thread in self.pending_threads[:]:
if thread.isFinished():
self.pending_threads.remove(thread)
class XdkWindow(QMainWindow):
""" """
loadFileRequested = Signal(str)
def __init__(self, parent=None):
super(XdkWindow, self).__init__(parent)
# load the user interface
projexui.loadUi(__file__, self)
# define custom properties
self._currentContentsIndex = -1
self._worker = XdkWorker()
self._workerThread = QThread()
self._worker.moveToThread(self._workerThread)
self._workerThread.start()
# set default properties
self.setAcceptDrops(True)
self.setAttribute(Qt.WA_DeleteOnClose)
self.uiFindNextBTN.setDefaultAction(self.uiFindNextACT)
self.uiFindPrevBTN.setDefaultAction(self.uiFindPrevACT)
self.uiFindWIDGET.setVisible(False)
self.uiSearchWEB.page().setLinkDelegationPolicy(
QWebPage.DelegateAllLinks)
self.refreshUi()
# connect widgets
self.uiContentsTAB.currentChanged.connect(self.refreshUi)
self.uiContentsTAB.tabCloseRequested.connect(self.closeContentsWidget)
self.uiContentsTREE.itemExpanded.connect(self.loadItem)
self.uiContentsTREE.itemSelectionChanged.connect(self.refreshContents)
self.uiSearchTXT.returnPressed.connect(self.search)
self.uiSearchWEB.linkClicked.connect(self.gotoUrl)
self.uiIndexTREE.itemSelectionChanged.connect(self.refreshFromIndex)
# connect find actions
self.uiBackACT.triggered.connect(self.goBack)
self.uiForwardACT.triggered.connect(self.goForward)
self.uiHomeACT.triggered.connect(self.goHome)
self.uiFindTXT.textChanged.connect(self.findNext)
self.uiFindTXT.returnPressed.connect(self.findNext)
self.uiFindNextACT.triggered.connect(self.findNext)
self.uiFindPrevACT.triggered.connect(self.findPrev)
self.uiFindACT.triggered.connect(self.showFind)
self.uiFindCloseBTN.clicked.connect(self.uiFindWIDGET.hide)
self.uiCopyTextACT.triggered.connect(self.copyText)
# connect zoom actions
self.uiZoomResetACT.triggered.connect(self.zoomReset)
self.uiZoomInACT.triggered.connect(self.zoomIn)
self.uiZoomOutACT.triggered.connect(self.zoomOut)
# connect file actions
self.uiLoadACT.triggered.connect(self.loadFilename)
self.uiNewTabACT.triggered.connect(self.addContentsWidget)
self.uiCloseTabACT.triggered.connect(self.closeContentsWidget)
self.uiQuitACT.triggered.connect(self.close)
# connect the signals
self.loadFileRequested.connect(self._worker.loadFile)
self._worker.loadingFinished.connect(self.__addXdkItem)
QApplication.instance().aboutToQuit.connect(self.__cleanupWorker)
def __del__(self):
self.__cleanupWorker()
def __addXdkItem(self, filename):
item = XdkItem(filename)
# add the xdk content item
self.uiContentsTREE.addTopLevelItem(item)
# add the index list items
self.uiIndexTREE.blockSignals(True)
self.uiIndexTREE.setUpdatesEnabled(False)
for name, url in item.indexlist():
item = XTreeWidgetItem([name])
item.setToolTip(0, url)
item.setFixedHeight(22)
self.uiIndexTREE.addTopLevelItem(item)
self.uiIndexTREE.blockSignals(False)
self.uiIndexTREE.setUpdatesEnabled(True)
self.uiIndexTREE.sortByColumn(0, Qt.AscendingOrder)
self.unsetCursor()
def __cleanupWorker(self):
if self._workerThread is None:
return
self._workerThread.quit()
self._workerThread.wait()
self._worker.deleteLater()
self._workerThread.deleteLater()
self._worker = None
self._workerThread = None
def __gotoUrl(self, url):
if url.toLocalFile():
self.gotoUrl(url.toString())
else:
webbrowser.open(str(url.toString()))
def addContentsWidget(self):
"""
Adds a new contents widget tab into the contents tab.
:return <QWebView>
"""
curr_widget = self.currentContentsWidget()
widget = QWebView(self)
page = widget.page()
page.setLinkDelegationPolicy(page.DelegateAllLinks)
self.uiContentsTAB.blockSignals(True)
self.uiContentsTAB.addTab(widget, 'Documentation')
self.uiContentsTAB.setCurrentIndex(self.uiContentsTAB.count() - 1)
self.uiContentsTAB.blockSignals(False)
self._currentContentsIndex = self.uiContentsTAB.count() - 1
if curr_widget:
widget.setUrl(curr_widget.url())
widget.titleChanged.connect(self.refreshUi)
widget.linkClicked.connect(self.__gotoUrl)
return widget
def closeContentsWidget(self):
"""
Closes the current contents widget.
"""
widget = self.currentContentsWidget()
if (not widget):
return
widget.close()
widget.setParent(None)
widget.deleteLater()
def copyText(self):
"""
Copies the selected text to the clipboard.
"""
view = self.currentWebView()
QApplication.clipboard().setText(view.page().selectedText())
def currentContentsIndex(self):
"""
Returns the last index used for the contents widgets.
:return <int>
"""
return self._currentContentsIndex
def currentContentsWidget(self, autoadd=False):
"""
Returns the current contents widget based on the cached index. If \
no widget is specified and autoadd is True, then a new widget will \
be added to the tab.
:param autoadd | <bool>
:return <QWebView>
"""
widget = self.uiContentsTAB.widget(self.currentContentsIndex())
if (not isinstance(widget, QWebView)):
widget = None
if (not widget and autoadd):
widget = self.addContentsWidget()
return widget
def currentWebView(self):
return self.uiContentsTAB.currentWidget()
def dragEnterEvent(self, event):
if event.mimeData().hasUrls():
event.accept()
def dragMoveEvent(self, event):
if event.mimeData().hasUrls():
event.accept()
def dropEvent(self, event):
if event.mimeData().hasUrls():
for url in event.mimeData().urls():
self.loadFilename(str(url.toLocalFile()))
def findNext(self):
"""
Looks for the previous occurance of the current search text.
"""
text = self.uiFindTXT.text()
view = self.currentWebView()
options = QWebPage.FindWrapsAroundDocument
if (self.uiCaseSensitiveCHK.isChecked()):
options |= QWebPage.FindCaseSensitively
view.page().findText(text, options)
def findPrev(self):
"""
Looks for the previous occurance of the current search text.
"""
text = self.uiFindTXT.text()
view = self.currentWebView()
options = QWebPage.FindWrapsAroundDocument
options |= QWebPage.FindBackward
if (self.uiCaseSensitiveCHK.isChecked()):
options |= QWebPage.FindCaseSensitively
view.page().findText(text, options)
def findXdk(self, name):
"""
Looks up the xdk item based on the current name.
:param name | <str>
:return <XdkItem> || None
"""
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
if (item.text(0) == name):
return item
return None
def goBack(self):
widget = self.currentContentsWidget()
if (widget):
widget.page().history().back()
def goForward(self):
widget = self.currentContentsWidget()
if (widget):
widget.page().history().forward()
def goHome(self):
widget = self.currentContentsWidget()
if (widget):
widget.history().goHome()
def gotoUrl(self, url):
if not QApplication.keyboardModifiers() == Qt.ControlModifier:
widget = self.currentContentsWidget(autoadd=True)
else:
widget = self.addContentsWidget()
index = self.uiContentsTAB.indexOf(widget)
self.uiContentsTAB.setCurrentIndex(index)
widget.setUrl(QUrl(url))
def gotoItem(self, path):
"""
Goes to a particular path within the XDK.
:param path | <str>
"""
if not path:
return
sections = str(path).split('/')
check = projex.text.underscore(sections[0])
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
if projex.text.underscore(item.text(1)) == check:
item.gotoItem('/'.join(sections[1:]))
break
def loadItem(self, item):
"""
Loads the inputed item.
:param item | <QTreeWidgetItem>
"""
if isinstance(item, XdkEntryItem):
item.load()
def loadedFilenames(self):
"""
Returns a list of all the xdk files that are currently loaded.
:return [<str>, ..]
"""
output = []
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
output.append(str(item.filepath()))
return output
def loadFilename(self, filename=''):
"""
Loads a new XDK file into the system.
:param filename | <str>
:return <bool> | success
"""
if (not (filename and isinstance(filename, basestring))):
filename = QFileDialog.getOpenFileName(self, 'Open XDK File',
QDir.currentPath(),
'XDK Files (*.xdk)')
if type(filename) == tuple:
filename = str(filename[0])
if not filename:
return False
if not (filename and os.path.exists(filename)):
return False
elif filename in self.loadedFilenames():
return False
self.loadFileRequested.emit(filename)
self.setCursor(Qt.WaitCursor)
return True
def refreshFromIndex(self):
"""
Refreshes the documentation from the selected index item.
"""
item = self.uiIndexTREE.currentItem()
if (not item):
return
self.gotoUrl(item.toolTip(0))
def refreshContents(self):
"""
Refreshes the contents tab with the latest selection from the browser.
"""
item = self.uiContentsTREE.currentItem()
if not isinstance(item, XdkEntryItem):
return
item.load()
url = item.url()
if url:
self.gotoUrl(url)
def refreshUi(self):
"""
Refreshes the interface based on the current settings.
"""
widget = self.uiContentsTAB.currentWidget()
is_content = isinstance(widget, QWebView)
if is_content:
self._currentContentsIndex = self.uiContentsTAB.currentIndex()
history = widget.page().history()
else:
history = None
self.uiBackACT.setEnabled(is_content and history.canGoBack())
self.uiForwardACT.setEnabled(is_content and history.canGoForward())
self.uiHomeACT.setEnabled(is_content)
self.uiNewTabACT.setEnabled(is_content)
self.uiCopyTextACT.setEnabled(is_content)
self.uiCloseTabACT.setEnabled(is_content
and self.uiContentsTAB.count() > 2)
for i in range(1, self.uiContentsTAB.count()):
widget = self.uiContentsTAB.widget(i)
self.uiContentsTAB.setTabText(i, widget.title())
def search(self):
"""
Looks up the current search terms from the xdk files that are loaded.
"""
QApplication.instance().setOverrideCursor(Qt.WaitCursor)
terms = str(self.uiSearchTXT.text())
html = []
entry_html = '<a href="%(url)s">%(title)s</a><br/>'\
'<small>%(url)s</small>'
for i in range(self.uiContentsTREE.topLevelItemCount()):
item = self.uiContentsTREE.topLevelItem(i)
results = item.search(terms)
results.sort(lambda x, y: cmp(y['strength'], x['strength']))
for item in results:
html.append(entry_html % item)
if (not html):
html.append('<b>No results were found for %s</b>' % terms)
self.uiSearchWEB.setHtml(SEARCH_HTML % '<br/><br/>'.join(html))
QApplication.instance().restoreOverrideCursor()
def showFind(self):
self.uiFindWIDGET.show()
self.uiFindTXT.setFocus()
self.uiFindTXT.selectAll()
def zoomIn(self):
view = self.currentWebView()
view.setZoomFactor(view.zoomFactor() + 0.1)
def zoomOut(self):
view = self.currentWebView()
view.setZoomFactor(view.zoomFactor() - 0.1)
def zoomReset(self):
view = self.currentWebView()
view.setZoomFactor(1)
@staticmethod
def browse(parent, filename=''):
"""
Creates a new XdkWidnow for browsing an XDK file.
:param parent | <QWidget>
filename | <str>
"""
dlg = XdkWindow(parent)
dlg.show()
if (filename):
dlg.loadFilename(filename)
