def __init__(self,
image,
parent=None,
cid=-1,
pos=wx.DefaultPosition,
title=sitwPara.Title):
wx.Frame.__init__(self, parent, cid, title)
self.SetBackgroundColour((0, 255, 0))
self.SetSize((360, 80))
self.Center()
self.Iconize()
self.utLogEvent = SitwLog(self, 'logActions')
#self.Bind(wx.EVT_SIZE, self.OnResize)
self.Bind(wx.EVT_CLOSE, self.OnCloseWindow)
self.Bind(wx.EVT_IDLE, self.OnIdle)
self.utLogEvent.logMsg(
'------------ ' + sitwPara.Title + ' ------------', True)
self.readIniFile()
self.initComm()
self.timer3 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.Timer_1_Second, self.timer3)
self.timer3.Start(1000) # 1s
self.timerHB = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.Timer_15_Second, self.timerHB)
self.timerHB.Start(sitwPara.lHeartbeatInterval) # 15s
def __init__(self, image, parent = None, id = -1,
pos = wx.DefaultPosition, title = sitwPara.Title):
wx.Frame.__init__(self, parent, id, title)
self.SetBackgroundColour((0, 0, 0))
self.SetSize((360, 80))
self.Center()
self.Iconize()
self.panel = wx.Panel(self, size=(320, 336))
self.panel.Bind(wx.EVT_PAINT, self.OnPaint)
#self.panel.Bind(wx.EVT_ERASE_BACKGROUND, self.OnEraseBackground)
self.Fit()
self.SampleCount = 12 #for detecting environment 12 x 10sec = 2min
self.KeyPressed = ''
self.CurAction = ''
self.CurPos = win32api.GetCursorPos()
self.PreAction = ''
self.PrePos = win32api.GetCursorPos()
self.bKeyIntervalOK = True
self.KeyMatReady = False
self.ListValMat = []
self.ListValEnv = []
self.ListValBrt = []
self.KeySearch = False
self.dtSearchStart = datetime.datetime.now()
self.dtAction = datetime.datetime.now()
self.dtRefresh = datetime.datetime.now()
self.ChannelCount = 0
self.bNight = False
self.ctEvn = 0
#self.edgeTop = 50
#self.edgeBottom = sitwPara.MoveEdgeBottom1
#self.edgeLeft = 50
#self.edgeRight = 50
self.edgeTop = 18
self.edgeBottom = 18
self.edgeLeft = 18
self.edgeRight = 18
self.strLogAction = ''
self.strLogBrightness = ''
self.subp = None
self.List_ProgramFile = []
self.List_Program = []
self.OnScreenApp = ''
#self.utSchedule = SitwScheduleTools(self)
self.utLogAction = SitwLog(self, 'logAction')
self.utLogBrightness = SitwLog(self, 'logBrightness')
#self.Bind(wx.EVT_SIZE, self.OnResize)
self.Bind(wx.EVT_CLOSE, self.OnCloseWindow)
self.Bind(wx.EVT_IDLE, self.OnIdle)
self.prtMsg('PhidgetsKey Starting...')
self.readIniFile()
self.initPhidgets()
self.initKeys()
'''collect ambient light info'''
self.timer1 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.CheckEnv, self.timer1)
self.timer1.Start(sitwPara.SampleInterval_Env) #1000 = 1 second
'''check if there is any key has been covered'''
self.timer2 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.CheckKey, self.timer2)
self.timer2.Start(sitwPara.SampleInterval_Key) #1000 = 1 second
'''find current on screen experience according to schedule file'''
''' -- removed --'''
'''collect sensor readings for analysis'''
if sitwPara.Log_Brightness == 'Yes':
print '<Log_Brightness On>'
self.timer5 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.logBrightness, self.timer5)
self.timer5.Start(60 * 1000) #1000 = 1 second
self.utLogBrightness.logMsg('------ log is starting ------\t' + sitwPara.Title)
self.logBrightness(None)
else:
print '<Log_Brightness Off>'
'''collect keypad actions for analysis'''
if sitwPara.Log_Action == 'Yes':
print '<Log_Action On>'
self.timer6 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.logActions, self.timer6)
self.timer6.Start(9 * 1000) #1000 = 1 second
self.utLogAction.logMsg('------ log is starting ------\t' + sitwPara.Title)
else:
print '<Log_Action Off>'
###Change Cursor
###http://converticon.com/
### http://stackoverflow.com/questions/7921307/temporarily-change-cursor-using-python
self.SetSystemCursor = windll.user32.SetSystemCursor #reference to function
self.SetSystemCursor.restype = c_int #return
self.SetSystemCursor.argtype = [c_int, c_int] #arguments
self.LoadCursorFromFile = windll.user32.LoadCursorFromFileA #reference to function
self.LoadCursorFromFile.restype = c_int #return
self.LoadCursorFromFile.argtype = c_char_p #arguments
CursorPath ='../pic/handr.cur'
NewCursor = self.LoadCursorFromFile(CursorPath)
if NewCursor is None:
print "Error loading the cursor"
elif self.SetSystemCursor(NewCursor, win32con.IDC_ARROW) == 0:
print "Error in setting the cursor"
###Change Cursor
self.DimScreen = wx.DisplaySize()
print 'Screen Dimensions: ' + str(self.DimScreen[0]) + ' x ' + str(self.DimScreen[1])
##########################################
'''m,b parameters for each sensor'''
for i in range(len(sitwPara.List_mb)):
print '===== ', sitwPara.List_mb[i][0], sitwPara.List_mb[i][1]
class SitwUsageLog(wx.Frame):
def __init__(self,
image,
parent=None,
cid=-1,
pos=wx.DefaultPosition,
title=sitwPara.Title):
wx.Frame.__init__(self, parent, cid, title)
self.SetBackgroundColour((0, 255, 0))
self.SetSize((360, 80))
self.Center()
self.Iconize()
self.utLogEvent = SitwLog(self, 'logActions')
#self.Bind(wx.EVT_SIZE, self.OnResize)
self.Bind(wx.EVT_CLOSE, self.OnCloseWindow)
self.Bind(wx.EVT_IDLE, self.OnIdle)
self.utLogEvent.logMsg(
'------------ ' + sitwPara.Title + ' ------------', True)
self.readIniFile()
self.initComm()
self.timer3 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.Timer_1_Second, self.timer3)
self.timer3.Start(1000) # 1s
self.timerHB = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.Timer_15_Second, self.timerHB)
self.timerHB.Start(sitwPara.lHeartbeatInterval) # 15s
def initComm(self):
self.comm1 = None
self.comm2 = None
self.comm1 = SitwSocket('Union Client', self)
self.comm1.setRunFlag(True)
self.comm1.start()
#self.comm2 = SitwSocketServer('Scheduler Server', self)
#self.comm2.setRunFlag(True)
#self.comm2.start()
def readIniFile(self):
self.prtMsg('Read system ini file...')
try:
config = ConfigParser.ConfigParser()
config.readfp(open(sitwPara.FilePath_Ini))
for eachIniData in self.iniData():
Section = eachIniData[0]
Keys = eachIniData[1]
for Key in Keys:
val = config.get(Section, Key)
if (Section == "General"):
if (Key == "Node_Name"):
sitwPara.Node_Name = val
else:
pass
print('[' + Section + '] ' + Key + ' = ' + val)
continue
except Exception, msg:
print '[Err] ' + str(msg)
self.prtMsg('Error: readIniFile()')
finally:
class SitwPhidgetsKey(wx.Frame):
def __init__(self, image, parent = None, id = -1,
pos = wx.DefaultPosition, title = sitwPara.Title):
wx.Frame.__init__(self, parent, id, title)
self.SetBackgroundColour((0, 0, 0))
self.SetSize((360, 80))
self.Center()
self.Iconize()
self.panel = wx.Panel(self, size=(320, 336))
self.panel.Bind(wx.EVT_PAINT, self.OnPaint)
#self.panel.Bind(wx.EVT_ERASE_BACKGROUND, self.OnEraseBackground)
self.Fit()
self.SampleCount = 12 #for detecting environment 12 x 10sec = 2min
self.KeyPressed = ''
self.CurAction = ''
self.CurPos = win32api.GetCursorPos()
self.PreAction = ''
self.PrePos = win32api.GetCursorPos()
self.bKeyIntervalOK = True
self.KeyMatReady = False
self.ListValMat = []
self.ListValEnv = []
self.ListValBrt = []
self.KeySearch = False
self.dtSearchStart = datetime.datetime.now()
self.dtAction = datetime.datetime.now()
self.dtRefresh = datetime.datetime.now()
self.ChannelCount = 0
self.bNight = False
self.ctEvn = 0
#self.edgeTop = 50
#self.edgeBottom = sitwPara.MoveEdgeBottom1
#self.edgeLeft = 50
#self.edgeRight = 50
self.edgeTop = 18
self.edgeBottom = 18
self.edgeLeft = 18
self.edgeRight = 18
self.strLogAction = ''
self.strLogBrightness = ''
self.subp = None
self.List_ProgramFile = []
self.List_Program = []
self.OnScreenApp = ''
#self.utSchedule = SitwScheduleTools(self)
self.utLogAction = SitwLog(self, 'logAction')
self.utLogBrightness = SitwLog(self, 'logBrightness')
#self.Bind(wx.EVT_SIZE, self.OnResize)
self.Bind(wx.EVT_CLOSE, self.OnCloseWindow)
self.Bind(wx.EVT_IDLE, self.OnIdle)
self.prtMsg('PhidgetsKey Starting...')
self.readIniFile()
self.initPhidgets()
self.initKeys()
'''collect ambient light info'''
self.timer1 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.CheckEnv, self.timer1)
self.timer1.Start(sitwPara.SampleInterval_Env) #1000 = 1 second
'''check if there is any key has been covered'''
self.timer2 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.CheckKey, self.timer2)
self.timer2.Start(sitwPara.SampleInterval_Key) #1000 = 1 second
'''find current on screen experience according to schedule file'''
''' -- removed --'''
'''collect sensor readings for analysis'''
if sitwPara.Log_Brightness == 'Yes':
print '<Log_Brightness On>'
self.timer5 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.logBrightness, self.timer5)
self.timer5.Start(60 * 1000) #1000 = 1 second
self.utLogBrightness.logMsg('------ log is starting ------\t' + sitwPara.Title)
self.logBrightness(None)
else:
print '<Log_Brightness Off>'
'''collect keypad actions for analysis'''
if sitwPara.Log_Action == 'Yes':
print '<Log_Action On>'
self.timer6 = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.logActions, self.timer6)
self.timer6.Start(9 * 1000) #1000 = 1 second
self.utLogAction.logMsg('------ log is starting ------\t' + sitwPara.Title)
else:
print '<Log_Action Off>'
###Change Cursor
###http://converticon.com/
### http://stackoverflow.com/questions/7921307/temporarily-change-cursor-using-python
self.SetSystemCursor = windll.user32.SetSystemCursor #reference to function
self.SetSystemCursor.restype = c_int #return
self.SetSystemCursor.argtype = [c_int, c_int] #arguments
self.LoadCursorFromFile = windll.user32.LoadCursorFromFileA #reference to function
self.LoadCursorFromFile.restype = c_int #return
self.LoadCursorFromFile.argtype = c_char_p #arguments
CursorPath ='../pic/handr.cur'
NewCursor = self.LoadCursorFromFile(CursorPath)
if NewCursor is None:
print "Error loading the cursor"
elif self.SetSystemCursor(NewCursor, win32con.IDC_ARROW) == 0:
print "Error in setting the cursor"
###Change Cursor
self.DimScreen = wx.DisplaySize()
print 'Screen Dimensions: ' + str(self.DimScreen[0]) + ' x ' + str(self.DimScreen[1])
##########################################
'''m,b parameters for each sensor'''
for i in range(len(sitwPara.List_mb)):
print '===== ', sitwPara.List_mb[i][0], sitwPara.List_mb[i][1]
##########################################
### not in use at the moment
def OnEraseBackground(self, event):
return True
def OnPaint(self, event):
'''
# establish the painting surface
dc = wx.PaintDC(self.panel)
dc.SetPen(wx.Pen('blue', 4))
# draw a blue line (thickness = 4)
dc.DrawLine(50, 20, 300, 20)
dc.SetPen(wx.Pen('red', 1))
# draw a red rounded-rectangle
rect = wx.Rect(50, 50, 100, 100)
dc.DrawRoundedRectangleRect(rect, 8)
# draw a red circle with yellow fill
dc.SetBrush(wx.Brush('yellow'))
x = 250
y = 100
r = 50
dc.DrawCircle(x, y, r)
'''
#dc = wx.PaintDC(self.panel)
dc = wx.BufferedPaintDC(self.panel)
dc.SetBackground(wx.BLUE_BRUSH)
dc.Clear()
self.onDraw(dc)
def onDraw(self, dc):
strColorPen1 = 'red'
strColorPen2 = 'blue'
for i in range(sitwPara.KeyCount):
rect = sitwPara.List_ButtonPos[i]
dc.SetBrush(wx.Brush((0, 255*self.ListValBrt[i], 255*self.ListValBrt[i])))
if self.KeyPressed == sitwPara.List_Action[i]:
dc.SetPen(wx.Pen(strColorPen1, 5))
else:
dc.SetPen(wx.Pen(strColorPen2, 1))
#dc.SetPen(wx.TRANSPARENT_PEN)
dc.DrawRoundedRectangleRect(rect, 8)
def initPhidgets(self):
try:
self.interfaceKit = InterfaceKit()
except RuntimeError as e:
print("Runtime Exception: %s" % e.details)
print("Exiting....")
exit(1)
try:
self.interfaceKit.setOnAttachHandler(self.inferfaceKitAttached)
self.interfaceKit.setOnDetachHandler(self.interfaceKitDetached)
self.interfaceKit.setOnErrorhandler(self.interfaceKitError)
self.interfaceKit.setOnInputChangeHandler(self.interfaceKitInputChanged)
self.interfaceKit.setOnOutputChangeHandler(self.interfaceKitOutputChanged)
self.interfaceKit.setOnSensorChangeHandler(self.interfaceKitSensorChanged)
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
print("Exiting....")
exit(1)
print("Opening phidget object....")
try:
self.interfaceKit.openPhidget()
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
print("Exiting....")
exit(1)
print("Waiting for attach....")
try:
self.interfaceKit.waitForAttach(10000)
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
self.closePhidgets()
else:
self.displayDeviceInfo()
#get sensor count
try:
self.ChannelCount = self.interfaceKit.getSensorCount()
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
self.closePhidgets()
sitwPara.KeyCount = 0 #no sensor has been detected
self.prtMsg(' ****** No sensor has been detected !!!\n')
print("Setting the data rate for each sensor index to 4ms....")
for i in range(sitwPara.KeyCount):
try:
self.interfaceKit.setDataRate(i, 4)
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
### depends on the low light performance of the sensor
print("Setting the sensitivity for each sensor index to ???....")
for i in range(sitwPara.KeyCount):
try:
self.interfaceKit.setSensorChangeTrigger(i, 2) #~~~~*YL*~~~~
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
def closePhidgets(self):
#print("Press Enter to quit....")
#chr = sys.stdin.read(1)
#print("Closing...")
try:
self.interfaceKit.closePhidget()
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
print("Exiting....")
exit(1)
#print("Done.")
#exit(1)
def initKeys(self):
self.KeyPressed = ''
self.ListValMat = []
for i in range(sitwPara.KeyCount):
self.ListValEnv = []
for j in range(self.SampleCount):
self.ListValEnv.append(self.readSensorValue(i))
self.ListValMat.append(self.ListValEnv)
self.KeyMatReady = True
self.ListValBrt = []
for i in range(sitwPara.KeyCount):
self.ListValBrt.append(0)
def readIniFile(self):
self.prtMsg('Read system ini file...')
try:
config = ConfigParser.ConfigParser()
config.readfp(open(sitwPara.FilePath_Ini))
for eachIniData in self.iniData():
Section = eachIniData[0]
Keys = eachIniData[1]
for Key in Keys:
val = config.get(Section, Key)
if (Section == "General"):
if (Key == "KeyCount"):
sitwPara.KeyCount = int(val)
elif (Key == "Sensitivity"):
sitwPara.Sensitivity = float(val)
elif (Key == "MovingPace"):
sitwPara.MovingPace = int(val)
elif (Key == "SampleInterval_Key"):
sitwPara.SampleInterval_Key = int(val)
elif (Key == "SampleInterval_Env"):
sitwPara.SampleInterval_Env = int(val)
elif (Key == "Log_Action"):
sitwPara.Log_Action = str(val)
elif (Key == "Log_Brightness"):
sitwPara.Log_Brightness = str(val)
else:
pass
print('[' + Section + '] ' + Key + ' = ' + val)
continue
except: #IOError
self.prtMsg('Error: readIniFile()')
finally:
pass
def iniData(self):
return (("General",
("KeyCount",
"Sensitivity",
"MovingPace",
"SampleInterval_Key",
"SampleInterval_Env",
"Log_Action",
"Log_Brightness")),)
#Information Display Function
def displayDeviceInfo(self):
print("|------------|----------------------------------|--------------|------------|")
print("|- Attached -|- Type -|- Serial No. -|- Version -|")
print("|------------|----------------------------------|--------------|------------|")
print("|- %8s -|- %30s -|- %10d -|- %8d -|" % (self.interfaceKit.isAttached(), self.interfaceKit.getDeviceName(), self.interfaceKit.getSerialNum(), self.interfaceKit.getDeviceVersion()))
print("|------------|----------------------------------|--------------|------------|")
print("Number of Digital Inputs: %i" % (self.interfaceKit.getInputCount()))
print("Number of Digital Outputs: %i" % (self.interfaceKit.getOutputCount()))
print("Number of Sensor Inputs: %i" % (self.interfaceKit.getSensorCount()))
#Event Handler Callback Functions
def inferfaceKitAttached(self, e):
attached = e.device
print("InterfaceKit %i Attached!" % (attached.getSerialNum()))
def interfaceKitDetached(self, e):
detached = e.device
print("InterfaceKit %i Detached!" % (detached.getSerialNum()))
def interfaceKitError(self, e):
try:
source = e.device
print("InterfaceKit %i: Phidget Error %i: %s" % (source.getSerialNum(), e.eCode, e.description))
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
def interfaceKitInputChanged(self, e):
source = e.device
print("InterfaceKit %i: Input %i: %s" % (source.getSerialNum(), e.index, e.state))
def interfaceKitSensorChanged(self, e):
if not self.KeyMatReady:
return
#source = e.device
#print("InterfaceKit %i: Sensor %i: %i" % (source.getSerialNum(), e.index, e.value))
if not self.KeySearch:
self.KeySearch = True
self.dtSearchStart = datetime.datetime.now()
def interfaceKitOutputChanged(self, e):
source = e.device
print("InterfaceKit %i: Output %i: %s" % (source.getSerialNum(), e.index, e.state))
def readSensorValue(self, channel_id):
val = 0.0
try:
val = self.interfaceKit.getSensorValue(channel_id)
#val = self.interfaceKit.getSensorRawValue(channel_id) / 4.095
except PhidgetException as e:
print("Phidget Exception %i: %s" % (e.code, e.details))
#val = 1.478777 * float(val) + 33.67076 #------ for 1142_0: Lux = m * SensorValue + b
#val = math.exp(0.02385 * float(val) - 0.56905) #------ for 1143_0: Lux = math.exp(m * SensorValue + b)
#val = math.exp(sitwPara.List_mb[channel_id][0] * float(val) + sitwPara.List_mb[channel_id][1]) #------ for 1143_0: Lux = math.exp(m * SensorValue + b)
return val
def CheckEnv(self, event):
for i in range(sitwPara.KeyCount):
ValIns = self.readSensorValue(i)
ValEnv = sum(self.ListValMat[i]) / len(self.ListValMat[i])
if (float(ValIns) / float(ValEnv)) > 0.70 or self.ctEvn >= 2: #natural change or the big change keeps for long time
self.ListValMat[i].pop(0)
self.ListValMat[i].append(ValIns)
self.ctEvn = 0
else:
self.ctEvn += 1 #ignore those suddenly changes
###test
#for val in self.ListValMax:
# print val, '->', sum(val)/len(val)
#print '-------------------------------------------------------'
def CheckKey(self, event):
if not self.KeySearch:
return
dtCurrentTime = datetime.datetime.now()
if dtCurrentTime - self.dtSearchStart > datetime.timedelta(microseconds = 6000000): # =6s ; 1000000 = 1s
self.KeySearch = False
if dtCurrentTime - self.dtAction > datetime.timedelta(microseconds = 500000): # =0.5s ; 1000000 = 1s
self.bKeyIntervalOK = True
else:
self.bKeyIntervalOK = False
self.bNight = True
for i in range(sitwPara.KeyCount):
ValIns = self.readSensorValue(i)
ValEnv = sum(self.ListValMat[i]) / len(self.ListValMat[i])
if ValEnv > 20.0:
self.bNight = False
self.ListValBrt[i] = float(ValIns) / float(ValEnv)
if self.ListValBrt[i] > 1.0:
self.ListValBrt[i] = 1.0
#sort
#self.ListValBrt.sort(cmp = None, key = None, reverse = False)
if self.bNight == False:
NightFactor = 1.0
else:
NightFactor = 1.8
#KeyID = self.ListValBrt.index(min(self.ListValBrt))
for i in range(sitwPara.KeyCount):
KeyID = sitwPara.List_KeyCheckOrder[i]
if self.ListValBrt[KeyID] < (sitwPara.Sensitivity * NightFactor):
bKey = True
break
else:
bKey = False
if bKey == True:
if KeyID == 1:
if self.KeyPressed == 'left' or self.bKeyIntervalOK == True:
self.KeyPressed = 'left'
self.dtAction = datetime.datetime.now()
else:
self.KeyPressed = ''
elif KeyID == 2:
if self.KeyPressed == 'right' or self.bKeyIntervalOK == True:
self.KeyPressed = 'right'
self.dtAction = datetime.datetime.now()
else:
self.KeyPressed = ''
elif KeyID == 3:
if self.KeyPressed == 'up' or self.bKeyIntervalOK == True:
self.KeyPressed = 'up'
self.dtAction = datetime.datetime.now()
else:
self.KeyPressed = ''
elif KeyID == 4:
if self.KeyPressed == 'down' or self.bKeyIntervalOK == True:
self.KeyPressed = 'down'
self.dtAction = datetime.datetime.now()
else:
self.KeyPressed = ''
elif KeyID == 0:
if self.KeyPressed != 'click' and self.KeyPressed != 'clicked' and self.KeyPressed != 'dclick' and self.KeyPressed != 'dclicked' and self.bKeyIntervalOK == True:
self.KeyPressed = 'click'
self.dtAction = datetime.datetime.now()
elif self.KeyPressed != 'dclick' and self.KeyPressed != 'dclicked' and (dtCurrentTime - self.dtAction > datetime.timedelta(microseconds = 2200000)): # =2.2s ; 1000000 = 1s
self.KeyPressed = 'dclick'
self.dtAction = datetime.datetime.now()
else:
self.KeyPressed = ''
if len(self.KeyPressed) > 0:
###filter
#-- removed ---
###filter
pos = win32api.GetCursorPos()
if self.KeyPressed == 'up':
if pos[1] >= self.edgeTop:
#nx = (pos[0]) * 65535.0 / self.DimScreen[0]
#ny = (pos[1] - sitwPara.MovingPace) * 65535.0 / self.DimScreen[1]
win32api.mouse_event(win32con.MOUSEEVENTF_MOVE, 0, -sitwPara.MovingPace)
#win32api.SetCursorPos((pos[0], pos[1] - sitwPara.MovingPace))
elif self.KeyPressed == 'down':
if pos[1] <= self.DimScreen[1] - self.edgeBottom:
#nx = (pos[0]) * 65535.0 / self.DimScreen[0]
#ny = (pos[1] + sitwPara.MovingPace) * 65535.0 / self.DimScreen[1]
win32api.mouse_event(win32con.MOUSEEVENTF_MOVE, 0, +sitwPara.MovingPace)
#win32api.SetCursorPos((pos[0], pos[1] + sitwPara.MovingPace))
elif self.KeyPressed == 'left':
if pos[0] >= self.edgeLeft:
#nx = (pos[0] - sitwPara.MovingPace) * 65535.0 / self.DimScreen[0]
#ny = (pos[1]) * 65535.0 / self.DimScreen[1]
win32api.mouse_event(win32con.MOUSEEVENTF_MOVE, -sitwPara.MovingPace, 0)
#win32api.SetCursorPos((pos[0] - sitwPara.MovingPace, pos[1]))
elif self.KeyPressed == 'right':
if pos[0] <= self.DimScreen[0] - self.edgeRight:
#nx = (pos[0] + sitwPara.MovingPace) * 65535.0 / self.DimScreen[0]
#ny = (pos[1]) * 65535.0 / self.DimScreen[1]
win32api.mouse_event(win32con.MOUSEEVENTF_MOVE, +sitwPara.MovingPace, 0)
#win32api.SetCursorPos((pos[0] + sitwPara.MovingPace, pos[1]))
elif self.KeyPressed == 'click':
self.click(pos[0], pos[1])
#print '**********click**************'
self.KeyPressed = 'clicked'
elif self.KeyPressed == 'dclick':
self.dclick(pos[0], pos[1])
#print '**********dclick**************'
self.KeyPressed = 'dclicked'
###Action Log
if sitwPara.Log_Action == 'Yes':
self.CurAction = self.KeyPressed
self.CurPos = win32api.GetCursorPos()
if self.CurAction != self.PreAction and len(self.PreAction) > 0:
#dtCurrentTime = datetime.datetime.now()
#strTimeTag = datetime.datetime.strftime(dtCurrentTime, '%Y-%m-%d %H:%M:%S')
#pos = win32api.GetCursorPos()
strLog = self.PreAction + '\t(' + str(self.PrePos[0]) + ',' + str(self.PrePos[1]) + ')' \
+ '\t' + self.OnScreenApp
self.utLogAction.logMsg(strLog)
self.PreAction = self.CurAction
self.PrePos = self.CurPos
def click(self, x,y):
win32api.SetCursorPos((x,y))
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTDOWN,x,y,0,0)
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTUP,x,y,0,0)
def dclick(self, x,y):
win32api.SetCursorPos((x,y))
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTDOWN,x,y,0,0)
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTUP,x,y,0,0)
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTDOWN,x,y,0,0)
win32api.mouse_event(win32con.MOUSEEVENTF_LEFTUP,x,y,0,0)
def logBrightness(self, event):
strValEnv = ''
for i in range(sitwPara.KeyCount):
ValEnv = sum(self.ListValMat[i]) / len(self.ListValMat[i])
strValEnv += str('%06.2f'%(ValEnv)) + '\t'
self.utLogBrightness.logMsg(strValEnv)
self.utLogBrightness.wrtLog(False)
def logActions(self, event):
self.utLogAction.wrtLog(False)
def GetSchedule(self, event):
# --removed --
pass
def FindAppName(self, event):
# --removed --
pass
def prtMsg(self, strMsg):
dtCurrentTime = datetime.datetime.now()
strTimeTag = datetime.datetime.strftime(dtCurrentTime, '%Y-%m-%d %H:%M:%S')
#strTimeTag += str('%03d'%(int(datetime.datetime.strftime(dtCurrentTime, '%f'))/1000))
print(strTimeTag + ' ' + strMsg + "\n")
def OnIdle(self, event):
if not self.KeySearch:
return
dtCurrentTime = datetime.datetime.now()
if dtCurrentTime - self.dtRefresh > datetime.timedelta(microseconds = 200000): #1000000 = 1s
self.dtRefresh = dtCurrentTime
self.panel.Refresh(eraseBackground = False)
pass
def OnCloseWindow(self, event):
print "Do something b4 closing..."
###Change Cursor
CursorPath = "../pic/arrow.cur"
NewCursor = self.LoadCursorFromFile(CursorPath)
if NewCursor is None:
print "Error loading the cursor"
elif self.SetSystemCursor(NewCursor, win32con.IDC_ARROW) == 0:
print "Error in setting the cursor"
###Change Cursor
self.closePhidgets()
self.prtMsg('Destroy Phidgets Key')
if sitwPara.Log_Action == 'Yes':
self.utLogAction.wrtLog(True) #force to log all messages
if sitwPara.Log_Brightness == 'Yes':
self.utLogBrightness.wrtLog(True) #force to log all messages
#time.sleep(1)
self.Destroy()