def build_ipv4(anm, infrastructure=True):
"""Builds IPv4 graph"""
g_ipv4 = anm.add_overlay("ipv4")
g_in = anm['input']
g_graphics = anm['graphics']
g_phy = anm['phy']
g_ipv4.add_nodes_from(g_in)
g_ipv4.add_edges_from(g_in.edges(type="physical"))
ank_utils.aggregate_nodes(g_ipv4, g_ipv4.nodes("is_switch"),
retain="edge_id")
edges_to_split = [edge for edge in g_ipv4.edges() if edge.attr_both(
"is_l3device")]
split_created_nodes = list(
ank_utils.split(g_ipv4, edges_to_split, retain='edge_id'))
for node in split_created_nodes:
node['graphics'].x = ank_utils.neigh_average(g_ipv4, node, "x",
g_graphics) + 0.1 # temporary fix for gh-90
node['graphics'].y = ank_utils.neigh_average(g_ipv4, node, "y",
g_graphics) + 0.1 # temporary fix for gh-90
asn = ank_utils.neigh_most_frequent(
g_ipv4, node, "asn", g_phy) # arbitrary choice
node['graphics'].asn = asn
node.asn = asn # need to use asn in IP overlay for aggregating subnets
switch_nodes = g_ipv4.nodes("is_switch") # regenerate due to aggregated
g_ipv4.update(switch_nodes, collision_domain=True)
# switches are part of collision domain
g_ipv4.update(split_created_nodes, collision_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank_utils.neigh_equal(g_ipv4, node, "host", g_phy):
node.host = ank_utils.neigh_attr(
g_ipv4, node, "host", g_phy).next() # first attribute
# set collision domain IPs
for node in g_ipv4.nodes("collision_domain"):
graphics_node = g_graphics.node(node)
graphics_node.device_type = "collision_domain"
if not node.is_switch:
label = "_".join(
sorted(ank_utils.neigh_attr(g_ipv4, node, "label", g_phy)))
cd_label = "cd_%s" % label # switches keep their names
node.label = cd_label
node.cd_id = cd_label
graphics_node.label = cd_label
#TODO: need to set allocate_ipv4 by default in the readers
if g_in.data.allocate_ipv4 is False:
manual_ipv4_allocation(anm)
else:
import autonetkit.plugins.ipv4 as ipv4
ipv4.allocate_ips(g_ipv4, infrastructure)
ank_utils.save(g_ipv4)
def build_ip(anm):
g_ip = anm.add_overlay("ip")
g_in = anm['input']
g_graphics = anm['graphics']
g_phy = anm['phy']
g_ip.add_nodes_from(g_in)
g_ip.add_edges_from(g_in.edges(type="physical"))
ank_utils.aggregate_nodes(g_ip, g_ip.nodes("is_switch"),
retain="edge_id")
edges_to_split = [edge for edge in g_ip.edges() if edge.attr_both(
"is_l3device")]
for edge in edges_to_split:
edge.split = True # mark as split for use in building nidb
split_created_nodes = list(
ank_utils.split(g_ip, edges_to_split, retain=['edge_id', 'split']))
for node in split_created_nodes:
node['graphics'].x = ank_utils.neigh_average(g_ip, node, "x",
g_graphics) + 0.1 # temporary fix for gh-90
node['graphics'].y = ank_utils.neigh_average(g_ip, node, "y",
g_graphics) + 0.1 # temporary fix for gh-90
asn = ank_utils.neigh_most_frequent(
g_ip, node, "asn", g_phy) # arbitrary choice
node['graphics'].asn = asn
node.asn = asn # need to use asn in IP overlay for aggregating subnets
switch_nodes = g_ip.nodes("is_switch") # regenerate due to aggregated
g_ip.update(switch_nodes, collision_domain=True)
# switches are part of collision domain
g_ip.update(split_created_nodes, collision_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank_utils.neigh_equal(g_ip, node, "host", g_phy):
node.host = ank_utils.neigh_attr(
g_ip, node, "host", g_phy).next() # first attribute
# set collision domain IPs
for node in g_ip.nodes("collision_domain"):
graphics_node = g_graphics.node(node)
graphics_node.device_type = "collision_domain"
if not node.is_switch:
label = "_".join(
sorted(ank_utils.neigh_attr(g_ip, node, "label", g_phy)))
cd_label = "cd_%s" % label # switches keep their names
node.label = cd_label
node.cd_id = cd_label
graphics_node.label = cd_label
def build_ip(anm):
import autonetkit.plugins.ipv4 as ip
G_ip = anm.add_overlay("ip")
G_in = anm['input']
G_graphics = anm['graphics']
G_phy = anm['phy']
G_ip.add_nodes_from(G_in)
G_ip.add_edges_from(G_in.edges(type="physical"))
ank.aggregate_nodes(G_ip, G_ip.nodes("is_switch"), retain = "edge_id")
edges_to_split = [edge for edge in G_ip.edges() if edge.attr_both("is_l3device")]
split_created_nodes = list(ank.split(G_ip, edges_to_split, retain='edge_id'))
for node in split_created_nodes:
node['graphics'].x = ank.neigh_average(G_ip, node, "x", G_graphics)
node['graphics'].y = ank.neigh_average(G_ip, node, "y", G_graphics)
G_ip.update(split_created_nodes, collision_domain=True)
for node in G_ip.nodes("collision_domain"):
graphics_node = G_graphics.node(node)
node.host = G_phy.node(node.neighbors().next()).host # Set host to be same as one of the neighbors (arbitrary choice)
asn = ank.neigh_most_frequent(G_ip, node, "asn", G_phy) # arbitrary choice
node.asn = asn
graphics_node.asn = asn
graphics_node.x = ank.neigh_average(G_ip, node, "x", G_graphics)
graphics_node.device_type = "collision_domain"
cd_label = "cd_" + "_".join(sorted(ank.neigh_attr(G_ip, node, "label", G_phy)))
node.label = cd_label
graphics_node.label = cd_label
ip.allocate_ips(G_ip)
def assign_asn_to_interasn_cds(g_ip, address_block = None):
G_phy = g_ip.overlay("phy")
for collision_domain in g_ip.nodes("collision_domain"):
neigh_asn = list(ank_utils.neigh_attr(g_ip, collision_domain, "asn", G_phy)) #asn of neighbors
if len(set(neigh_asn)) == 1:
asn = set(neigh_asn).pop() # asn of any neigh, as all same
else:
asn = ank_utils.most_frequent(neigh_asn) # allocate cd to asn with most neighbors in it
collision_domain.asn = asn
return
def assign_asn_to_interasn_cds(g_ip, address_block=None):
G_phy = g_ip.overlay('phy')
for broadcast_domain in g_ip.nodes('broadcast_domain'):
neigh_asn = list(ank_utils.neigh_attr(g_ip, broadcast_domain,
'asn', G_phy)) # asn of neighbors
if len(set(neigh_asn)) == 1:
asn = set(neigh_asn).pop() # asn of any neigh, as all same
else:
asn = ank_utils.most_frequent(neigh_asn) # allocate cd to asn with most neighbors in it
broadcast_domain.asn = asn
return
def assign_asn_to_interasn_cds(G_ip):
#TODO: rename to assign_asn_to_cds as also does intra-asn cds
#TODO: make this a common function to ip4 and ip6
G_phy = G_ip.overlay("phy")
for collision_domain in G_ip.nodes("collision_domain"):
neigh_asn = list(ank_utils.neigh_attr(G_ip, collision_domain, "asn", G_phy)) #asn of neighbors
if len(set(neigh_asn)) == 1:
asn = set(neigh_asn).pop() # asn of any neigh, as all same
else:
asn = ank_utils.most_frequent(neigh_asn) # allocate cd to asn with most neighbors in it
collision_domain.asn = asn
return
def assign_asn_to_interasn_cds(G_ip):
#TODO: remove this if no longer needed
# TODO: rename to assign_asn_to_cds as also does intra-asn cds
# TODO: make this a common function to ip4 and ip6
G_phy = G_ip.overlay('phy')
for broadcast_domain in G_ip.nodes('broadcast_domain'):
neigh_asn = list(ank_utils.neigh_attr(G_ip, broadcast_domain,
'asn', G_phy)) # asn of neighbors
if len(set(neigh_asn)) == 1:
asn = set(neigh_asn).pop() # asn of any neigh, as all same
else:
asn = ank_utils.most_frequent(neigh_asn) # allocate bc to asn with most neighbors in it
broadcast_domain.asn = asn
return
def build_layer2_broadcast(anm):
g_l2 = anm['layer2']
g_phy = anm['phy']
g_graphics = anm['graphics']
g_l2_bc = anm.add_overlay('layer2_bc')
g_l2_bc.add_nodes_from(g_l2.l3devices())
g_l2_bc.add_nodes_from(g_l2.switches())
g_l2_bc.add_edges_from(g_l2.edges(), retain=['link_type'])
# remove external connectors
edges_to_split = [edge for edge in g_l2_bc.edges()
if edge.src.is_l3device() and edge.dst.is_l3device()]
# TODO: debug the edges to split
for edge in edges_to_split:
edge.split = True # mark as split for use in building nidb
split_created_nodes = list(ank_utils.split(g_l2_bc, edges_to_split,
retain=['split'],
id_prepend='cd_'))
# TODO: if parallel nodes, offset
# TODO: remove graphics, assign directly
if len(g_graphics):
co_ords_overlay = g_graphics # source from graphics overlay
else:
co_ords_overlay = g_phy # source from phy overlay
for node in split_created_nodes:
node['graphics'].x = ank_utils.neigh_average(g_l2_bc, node, 'x',
co_ords_overlay) + 0.1
# temporary fix for gh-90
node['graphics'].y = ank_utils.neigh_average(g_l2_bc, node, 'y',
co_ords_overlay) + 0.1
# temporary fix for gh-90
asn = ank_utils.neigh_most_frequent(
g_l2_bc, node, 'asn', g_phy) # arbitrary choice
node['graphics'].asn = asn
node.asn = asn # need to use asn in IP overlay for aggregating subnets
# also allocate an ASN for virtual switches
vswitches = [n for n in g_l2_bc.nodes()
if n['layer2'].device_type == "switch"
and n['layer2'].device_subtype == "virtual"]
for node in vswitches:
# TODO: refactor neigh_most_frequent to allow fallthrough attributes
# asn = ank_utils.neigh_most_frequent(g_l2_bc, node, 'asn', g_l2) #
# arbitrary choice
asns = [n['layer2'].asn for n in node.neighbors()]
asns = [x for x in asns if x is not None]
asn = ank_utils.most_frequent(asns)
node.asn = asn # need to use asn in IP overlay for aggregating subnets
# also mark as broadcast domain
from collections import defaultdict
coincident_nodes = defaultdict(list)
for node in split_created_nodes:
coincident_nodes[(node['graphics'].x, node['graphics'].y)].append(node)
coincident_nodes = {k: v for k, v in coincident_nodes.items()
if len(v) > 1} # trim out single node co-ordinates
import math
for _, val in coincident_nodes.items():
for index, item in enumerate(val):
index = index + 1
x_offset = 25 * math.floor(index / 2) * math.pow(-1, index)
y_offset = -1 * 25 * math.floor(index / 2) * math.pow(-1, index)
item['graphics'].x = item['graphics'].x + x_offset
item['graphics'].y = item['graphics'].y + y_offset
switch_nodes = g_l2_bc.switches() # regenerate due to aggregated
g_l2_bc.update(switch_nodes, broadcast_domain=True)
# switches are part of collision domain
g_l2_bc.update(split_created_nodes, broadcast_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank_utils.neigh_equal(g_l2_bc, node, 'host', g_phy):
node.host = ank_utils.neigh_attr(g_l2_bc, node, 'host',
g_phy).next() # first attribute
# set collision domain IPs
# TODO; work out why this throws a json exception
#autonetkit.ank.set_node_default(g_l2_bc, broadcast_domain=False)
for node in g_l2_bc.nodes('broadcast_domain'):
graphics_node = g_graphics.node(node)
#graphics_node.device_type = 'broadcast_domain'
if node.is_switch():
# TODO: check not virtual
node['phy'].broadcast_domain = True
if not node.is_switch():
# use node sorting, as accomodates for numeric/string names
graphics_node.device_type = 'broadcast_domain'
neighbors = sorted(neigh for neigh in node.neighbors())
label = '_'.join(neigh.label for neigh in neighbors)
cd_label = 'cd_%s' % label # switches keep their names
node.label = cd_label
graphics_node.label = cd_label
node.device_type = "broadcast_domain"
node.label = node.id
graphics_node.label = node.id
for node in vswitches:
node.broadcast_domain = True
def allocate_ips(G_ip):
log.info("Allocating IP addresses")
from netaddr import IPNetwork
address_block = IPNetwork("10.0.0.0/8")
subnet_address_blocks = address_block.subnet(16)
#TODO: need to divide this up per AS
G_ip.data.asn_blocks = defaultdict(list)
#print G_ip._graph
G_phy = G_ip.overlay.phy
collision_domains = list(G_ip.nodes("collision_domain"))
routers_by_asn = G_phy.groupby("asn", G_phy.nodes(device_type="router"))
for collision_domain in collision_domains:
neigh_asn = list(ank_utils.neigh_attr(G_ip, collision_domain, "asn", G_phy)) #asn of neighbors
if len(set(neigh_asn)) == 1:
asn = set(neigh_asn).pop() # asn of any neigh, as all same
else:
asn = ank_utils.most_frequent(neigh_asn) # allocate cd to asn with most neighbors in it
collision_domain.asn = asn
cds_by_asn = G_ip.groupby("asn", G_ip.nodes("collision_domain"))
# if node or subnet has IP already allocated, then skip from this tree
for asn in routers_by_asn:
log.info("Allocating IPs for ASN %s" % asn)
# Need to iterate by asn with routers, as single router AS may not have a cd
asn_cds = cds_by_asn.get(asn) or []
asn_cds = sorted(asn_cds)
#tree by ASN
#TODO: Add in loopbacks as a subnet also
asn_address_block = subnet_address_blocks.next()
#print "ips for asn", asn
G_ip.data.asn_blocks[asn].append(asn_address_block)
#TODO: record this in G_ip graph data not node/edge data
# Build list of collision domains sorted by size
size_list = defaultdict(list)
for cd in asn_cds:
sn_size = subnet_size(cd.degree()) # Size of this collision domain
size_list[sn_size].append(cd)
loopback_size = subnet_size(len(routers_by_asn[asn])) # calculate from number of routers in asn
ip_tree = defaultdict(list) # index by level to simplify creation of tree
try:
current_level = min(size_list) # start at base
except ValueError:
current_level = loopback_size # no cds, start at loopback
asn_loopback_tree_node = None #keep track of to allocate loopbacks at end
while True:
cds = size_list[current_level]
cds = sorted(cds, key = lambda x: x.node_id)
# initialse with leaves
#TODO: see if can get loopback on leftmost of tree -> then can have allocated with .1 .2 etc rather than .19 .20 etc
ip_tree[current_level] += list(TreeNode(cd=cd) for cd in sorted(cds))
if current_level == loopback_size:
asn_loopback_tree_node = TreeNode(cd = "loopback")
ip_tree[current_level].append(asn_loopback_tree_node)
# now connect up at parent level
tree_nodes = sorted(ip_tree[current_level]) # both leaves and parents of lower level
pairs = list(itertools.izip(tree_nodes[::2], tree_nodes[1::2]))
for left, right in pairs:
ip_tree[current_level+1].append(TreeNode(left, right))
if len(tree_nodes) % 2 == 1:
# odd number of tree nodes, add
final_tree_node = tree_nodes[-1]
ip_tree[current_level+1].append(TreeNode(final_tree_node, None))
current_level += 1
if asn_loopback_tree_node and len(ip_tree[current_level]) < 2:
# loopback has been allocated, and reached top of tree
break
#if leaf, assign back to collision domain
# allocate to tree
subnet_bits = 32 - max(ip_tree)
tree_subnet = asn_address_block.subnet(subnet_bits)
tree_root = ip_tree[max(ip_tree)].pop() # only one node at highest level (root)
tree_root.subnet = tree_subnet.next()
allocate_to_tree_node(tree_root)
#walk_tree(tree_root)
allocate_ips_to_cds(tree_root)
my_tree = Tree(tree_root, asn)
my_tree.save()
# Get loopback from loopback tree node
loopback_hosts = asn_loopback_tree_node.subnet.iter_hosts()
#router.loopback = loopback_hosts.next()
for router in sorted(routers_by_asn[asn], key = lambda x: x.label):
router.overlay.ip.loopback = loopback_hosts.next()
# now allocate to the links of each cd
for cd in asn_cds:
hosts = cd.subnet.iter_hosts()
for edge in sorted(cd.edges()):
edge.ip_address = hosts.next()
def build_layer2_broadcast(anm):
g_l2 = anm['layer2']
g_phy = anm['phy']
g_graphics = anm['graphics']
g_l2_bc = anm.add_overlay('layer2_bc')
g_l2_bc.add_nodes_from(g_l2)
g_l2_bc.add_edges_from(g_l2.edges())
edges_to_split = [edge for edge in g_l2_bc.edges()
if edge.src.is_l3device() and edge.dst.is_l3device()]
for edge in edges_to_split:
edge.split = True # mark as split for use in building nidb
split_created_nodes = list(ank_utils.split(g_l2_bc, edges_to_split,
retain=['split'],
id_prepend='cd_'))
for node in split_created_nodes:
node['graphics'].x = ank_utils.neigh_average(g_l2_bc, node, 'x',
g_graphics) + 0.1
# temporary fix for gh-90
node['graphics'].y = ank_utils.neigh_average(g_l2_bc, node, 'y',
g_graphics) + 0.1
# temporary fix for gh-90
asn = ank_utils.neigh_most_frequent(g_l2_bc, node, 'asn', g_phy) # arbitrary choice
node['graphics'].asn = asn
node.asn = asn # need to use asn in IP overlay for aggregating subnets
switch_nodes = g_l2_bc.switches() # regenerate due to aggregated
g_l2_bc.update(switch_nodes, broadcast_domain=True)
# switches are part of collision domain
g_l2_bc.update(split_created_nodes, broadcast_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank_utils.neigh_equal(g_l2_bc, node, 'host', g_phy):
node.host = ank_utils.neigh_attr(g_l2_bc, node, 'host',
g_phy).next() # first attribute
# set collision domain IPs
#TODO; work out why this throws a json exception
#autonetkit.ank.set_node_default(g_l2_bc, broadcast_domain=False)
for node in g_l2_bc.nodes('broadcast_domain'):
graphics_node = g_graphics.node(node)
#graphics_node.device_type = 'broadcast_domain'
if node.is_switch():
node['phy'].broadcast_domain = True
if not node.is_switch():
# use node sorting, as accomodates for numeric/string names
graphics_node.device_type = 'broadcast_domain'
neighbors = sorted(neigh for neigh in node.neighbors())
label = '_'.join(neigh.label for neigh in neighbors)
cd_label = 'cd_%s' % label # switches keep their names
node.label = cd_label
graphics_node.label = cd_label
node.device_type = "broadcast_domain"
def build_layer2_broadcast(anm):
g_l2 = anm['layer2']
g_phy = anm['phy']
g_graphics = anm['graphics']
g_l2_bc = anm.add_overlay('layer2_bc')
g_l2_bc.add_nodes_from(g_l2.l3devices())
g_l2_bc.add_nodes_from(g_l2.switches())
g_l2_bc.add_edges_from(g_l2.edges())
# remove external connectors
edges_to_split = [
edge for edge in g_l2_bc.edges()
if edge.src.is_l3device() and edge.dst.is_l3device()
]
#TODO: debug the edges to split
#print "edges to split", edges_to_split
for edge in edges_to_split:
edge.split = True # mark as split for use in building nidb
split_created_nodes = list(
ank_utils.split(g_l2_bc,
edges_to_split,
retain=['split'],
id_prepend='cd_'))
#TODO: if parallel nodes, offset
#TODO: remove graphics, assign directly
for node in split_created_nodes:
node['graphics'].x = ank_utils.neigh_average(g_l2_bc, node, 'x',
g_graphics) + 0.1
# temporary fix for gh-90
node['graphics'].y = ank_utils.neigh_average(g_l2_bc, node, 'y',
g_graphics) + 0.1
# temporary fix for gh-90
asn = ank_utils.neigh_most_frequent(g_l2_bc, node, 'asn',
g_phy) # arbitrary choice
node['graphics'].asn = asn
node.asn = asn # need to use asn in IP overlay for aggregating subnets
from collections import defaultdict
coincident_nodes = defaultdict(list)
for node in split_created_nodes:
coincident_nodes[(node['graphics'].x, node['graphics'].y)].append(node)
coincident_nodes = {
k: v
for k, v in coincident_nodes.items() if len(v) > 1
} # trim out single node co-ordinates
import math
for key, val in coincident_nodes.items():
for index, item in enumerate(val):
index = index + 1
x_offset = 25 * math.floor(index / 2) * math.pow(-1, index)
y_offset = -1 * 25 * math.floor(index / 2) * math.pow(-1, index)
item['graphics'].x = item['graphics'].x + x_offset
item['graphics'].y = item['graphics'].y + y_offset
switch_nodes = g_l2_bc.switches() # regenerate due to aggregated
g_l2_bc.update(switch_nodes, broadcast_domain=True)
# switches are part of collision domain
g_l2_bc.update(split_created_nodes, broadcast_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank_utils.neigh_equal(g_l2_bc, node, 'host', g_phy):
node.host = ank_utils.neigh_attr(g_l2_bc, node, 'host',
g_phy).next() # first attribute
# set collision domain IPs
#TODO; work out why this throws a json exception
#autonetkit.ank.set_node_default(g_l2_bc, broadcast_domain=False)
for node in g_l2_bc.nodes('broadcast_domain'):
graphics_node = g_graphics.node(node)
#graphics_node.device_type = 'broadcast_domain'
if node.is_switch():
node['phy'].broadcast_domain = True
if not node.is_switch():
# use node sorting, as accomodates for numeric/string names
graphics_node.device_type = 'broadcast_domain'
neighbors = sorted(neigh for neigh in node.neighbors())
label = '_'.join(neigh.label for neigh in neighbors)
cd_label = 'cd_%s' % label # switches keep their names
node.label = cd_label
graphics_node.label = cd_label
node.device_type = "broadcast_domain"
node.label = node.id
graphics_node.label = node.id
def build_ip(anm):
import autonetkit.plugins.ip as ip
G_ip = anm.add_overlay("ip")
G_in = anm['input']
G_graphics = anm['graphics']
G_phy = anm['phy']
G_ip.add_nodes_from(G_in)
G_ip.add_edges_from(G_in.edges(type="physical"))
#TODO: need to look at if allocate_v6 is specified: ie manually set
ank.aggregate_nodes(G_ip, G_ip.nodes("is_switch"), retain = "edge_id")
#TODO: add function to update edge properties: can overload node update?
edges_to_split = [edge for edge in G_ip.edges() if edge.attr_both("is_l3device")]
split_created_nodes = list(ank.split(G_ip, edges_to_split, retain='edge_id'))
for node in split_created_nodes:
node['graphics'].x = ank.neigh_average(G_ip, node, "x", G_graphics)
node['graphics'].y = ank.neigh_average(G_ip, node, "y", G_graphics)
asn = ank.neigh_most_frequent(G_ip, node, "asn", G_phy) # arbitrary choice
node['graphics'].asn = asn
# need to use asn in IP overlay for aggregating subnets
node.asn = asn
#TODO: could choose largest ASN if tie break
#TODO: see if need G_phy - should auto fall through to phy for ASN
switch_nodes = G_ip.nodes("is_switch")# regenerate due to aggregated
G_ip.update(switch_nodes, collision_domain=True) # switches are part of collision domain
G_ip.update(split_created_nodes, collision_domain=True)
# Assign collision domain to a host if all neighbours from same host
for node in split_created_nodes:
if ank.neigh_equal(G_ip, node, "host", G_phy):
node.host = ank.neigh_attr(G_ip, node, "host", G_phy).next() # first attribute
#TODO: Need to allocate interfaces or appropriate bypass for collision domain nodes
# set collision domain IPs
#TODO: trim next line
collision_domain_id = itertools.count(0) # TODO: remove this, as isn't needed as set id to be based on neighbors
for node in G_ip.nodes("collision_domain"):
graphics_node = G_graphics.node(node)
graphics_node.device_type = "collision_domain"
cd_id = collision_domain_id.next()
node.cd_id = cd_id
#TODO: Use this label
if not node.is_switch:
label = "_".join(sorted(ank.neigh_attr(G_ip, node, "label", G_phy)))
cd_label = "cd_%s" % label # switches keep their names
node.label = cd_label
node.cd_id = cd_label
graphics_node.label = cd_label
if G_in.data.allocate_ipv4 == False:
import netaddr
G_in_directed = anm['input_directed']
for l3_device in G_ip.nodes("is_l3device"):
directed_node = G_in_directed.node(l3_device)
l3_device.loopback = directed_node.ipv4loopback
for edge in l3_device.edges():
# find edge in G_in_directed
directed_edge = G_in_directed.edge(edge)
edge.ip_address = netaddr.IPAddress(directed_edge.ipv4)
# set subnet onto collision domain (can come from either direction)
collision_domain = edge.dst
if not collision_domain.subnet:
#TODO: see if direct method in netaddr to deduce network
prefixlen = directed_edge.netPrefixLenV4
cidr_string = "%s/%s" % (edge.ip_address, prefixlen)
intermediate_subnet = netaddr.IPNetwork(cidr_string)
cidr_string = "%s/%s" % (intermediate_subnet.network, prefixlen)
subnet = netaddr.IPNetwork(cidr_string)
collision_domain.subnet = subnet
# also need to form aggregated IP blocks (used for e.g. routing prefix advertisement)
loopback_blocks = {}
infra_blocks = {}
for asn, devices in G_ip.groupby("asn").items():
routers = [d for d in devices if d.is_router]
loopbacks = [r.loopback for r in routers]
loopback_blocks[asn] = netaddr.cidr_merge(loopbacks)
collision_domains = [d for d in devices if d.collision_domain]
subnets = [cd.subnet for cd in collision_domains]
infra_blocks[asn] = netaddr.cidr_merge(subnets)
G_ip.data.loopback_blocks = loopback_blocks
G_ip.data.infra_blocks = infra_blocks
else:
ip.allocate_ips(G_ip)
ank.save(G_ip)
