def run(device,
image,
yes=False,
no_bios=False,
xen_vga=None): # image can be device like /dev/sr0
if not os.path.exists(image):
raise Exception("System image file(%s) does not exist." % image)
disk_info = create_install_disk.get_disk_info(device)
device_size = disk_info["size"]
device_size_in_gb = float(device_size) / 1024**3
if device_size_in_gb < MINIMUM_DISK_SIZE_IN_GB:
raise Exception(
"Insufficient device capacity. %.1fGiB required(%.1fGiB)" %
(MINIMUM_DISK_SIZE_IN_GB, device_size_in_gb))
if not yes:
create_install_disk.print_disk_info([disk_info])
if raw_input(
"Are you sure to destroy all data on %s? ('yes' if sure): " %
device) != "yes":
return False
shutdown_vgs(
) # deactivate all VGs as target device might have belonged to some of them
bios_compatible = not no_bios and disk_info["bios_compatible"]
# create partition table
create_install_disk.execute_parted_command(
device, "mklabel %s" % ("msdos" if bios_compatible else "gpt"))
# create boot partition
create_install_disk.execute_parted_command(device,
"mkpart primary 1MiB 2GiB")
create_install_disk.execute_parted_command(device, "set 1 boot on")
if bios_compatible:
create_install_disk.execute_parted_command(device, "set 1 esp on")
# create lvm physical volume (for profile and virtual machines)
create_install_disk.execute_parted_command(device,
"mkpart primary 2GiB, -1")
# wait for udev to refresh partition info
create_install_disk.sync_udev()
boot_partition = create_install_disk.get_partition(device, 1)
physical_volume = create_install_disk.get_partition(device, 2)
# format boot partition
subprocess.check_call(["mkfs.vfat", "-F", "32", boot_partition])
# get boot partition uuid
boot_partition_uuid = create_install_disk.get_partition_uuid(
boot_partition)
# setup lvm
vgname = "wbvg-" + boot_partition_uuid
lvname = "profile"
shutdown_vgs() # this needs to be done again right before pvcreate
subprocess.check_call(["pvcreate", "-ffy", physical_volume],
close_fds=True)
create_install_disk.execute_parted_command(device, "set 2 lvm on")
subprocess.check_call(
["vgcreate", "--yes", "--addtag=@wbvg", vgname, physical_volume],
close_fds=True)
subprocess.check_call([
"lvcreate", "--yes", "--addtag=@wbprofile", "-n", lvname, "-L", "1G",
vgname
],
close_fds=True)
create_install_disk.sync_udev()
# detect vga mode if necessary
if xen_vga is None and not is_kms_compatible_system(): xen_vga = "DETECT"
if xen_vga == "DETECT": xen_vga = determine_xen_vga_mode()
with create_install_disk.tempmount(boot_partition, "rw", "vfat") as tmpdir:
# install bootloader
os.makedirs("%s/boot/grub" % tmpdir)
os.makedirs("%s/EFI/BOOT" % tmpdir)
if bios_compatible:
subprocess.check_call([
"grub-install", "--target=i386-pc", "--recheck",
"--boot-directory=%s/boot" % tmpdir, device
])
subprocess.check_call([
"grub-mkimage", "-p", "/boot/grub", "-o",
"%s/EFI/BOOT/bootx64.efi" % tmpdir, "-O", "x86_64-efi"
] + create_install_disk.GRUB_MODULES)
# boot config
with open("%s/boot/grub/grub.cfg" % tmpdir, "w") as f:
f.write("loopback loop /walbrix\n")
f.write("source (loop)/grub.cfg\n")
with open("%s/boot/grub/walbrix.cfg" % tmpdir, "w") as f:
#f.write("set WALBRIX_BOOT=UUID=%s\n" % boot_partition_uuid)
f.write("#set WALBRIX_DOM0_MEM=1024M\n")
f.write("#set WALBRIX_DOM0_MODEL=pvh\n")
f.write("#set WALBRIX_GRUB_DEFAULT=0\n")
f.write("#set WALBRIX_GRUB_TIMEOUT=3\n")
f.write(
"#set WALBRIX_PCI_PASSTHROUGH_DEVICES=(AA:BB.C)(XX:YY.Z)\n")
f.write("#set LINUX_DISABLE_SPECTRE_MITIGATIONS=1\n")
if xen_vga: f.write("set WALBRIX_XEN_VGA=%s\n" % xen_vga)
else: f.write("#set WALBRIX_XEN_VGA=gfx-640x480x32\n")
# copy system image
print "Installing Walbrix..."
image_dest = "%s/walbrix" % tmpdir
if magic.from_buffer(open(image).read(65536)).startswith("ISO 9660"):
subprocess.check_call(
["iso-read", "-i", image, "-e", "/walbrix", "-o", image_dest])
if stat.S_ISBLK(os.stat(device)[stat.ST_MODE]):
print "Done. Ejecting install disk..."
subprocess.call(["eject", image])
else:
shutil.copy(image, image_dest)
subprocess.call(["sync"])
print "Installing EFI xen..."
os.makedirs("%s/EFI/Walbrix" % tmpdir)
with create_install_disk.tempmount(image_dest, "-o ro,loop",
"squashfs") as squashfs:
shutil.copy("%s/x86_64/usr/lib64/efi/xen.efi" % squashfs,
"%s/EFI/Walbrix/xen.efi" % tmpdir)
shutil.copy("%s/x86_64/boot/kernel" % squashfs,
"%s/EFI/Walbrix/kernel" % tmpdir)
shutil.copy("%s/x86_64/boot/initramfs" % squashfs,
"%s/EFI/Walbrix/initramfs" % tmpdir)
with open("%s/EFI/Walbrix/xen.cfg" % tmpdir, "w") as f:
f.write("[global]\ndefault=Walbrix\n\n")
f.write("[Walbrix]\n")
f.write("options=dom0_mem=512M,max:512M\n")
f.write(
"kernel=kernel dolvm domdadm scandelay edd=off walbrix.boot=UUID=%s splash=silent,theme:wb console=tty1 quiet nomodeset\n"
% boot_partition_uuid)
f.write("ramdisk=initramfs\n")
subprocess.call(["sync"])
# format profile volume
profile_volume = "/dev/%s/profile" % vgname
subprocess.check_call(["mkfs.xfs", "-q", profile_volume])
# initialize profile volume
with create_install_disk.tempmount(profile_volume, "rw", "xfs") as tempdir:
# create profile partition marker
with open(os.path.join(tempdir, boot_partition_uuid), "w") as f:
f.write(
"This is a marker file which indicates that this partition is the profile partition for a boot partition specifically UUID'ed as its filename"
)
# install ins file if exists
ins_file = image + ".ins"
if os.path.isfile(ins_file):
rw_layer = os.path.join(tempdir, "root")
os.mkdir(rw_layer)
subprocess.call(["tar", "xvf", ins_file, "-C", rw_layer])
print "Done."
return True
def run(device, image, yes = False, no_bios = False, xen_vga = None): # image can be device like /dev/sr0
if not os.path.exists(image): raise Exception("System image file(%s) does not exist." % image)
disk_info = create_install_disk.get_disk_info(device)
device_size = disk_info["size"]
device_size_in_gb = float(device_size) / 1024**3
if device_size_in_gb < MINIMUM_DISK_SIZE_IN_GB: raise Exception("Insufficient device capacity. %.1fGiB required(%.1fGiB)" % (MINIMUM_DISK_SIZE_IN_GB, device_size_in_gb))
if not yes:
create_install_disk.print_disk_info([disk_info])
if raw_input("Are you sure to destroy all data on %s? ('yes' if sure): " % device) != "yes": return False
shutdown_vgs() # deactivate all VGs as target device might have belonged to some of them
bios_compatible = not no_bios and disk_info["bios_compatible"]
# create partition table
create_install_disk.execute_parted_command(device, "mklabel %s" % ("msdos" if bios_compatible else "gpt"))
# create boot partition
create_install_disk.execute_parted_command(device, "mkpart primary 1MiB 2GiB")
create_install_disk.execute_parted_command(device, "set 1 boot on")
if bios_compatible: create_install_disk.execute_parted_command(device, "set 1 esp on")
# create lvm physical volume (for profile and virtual machines)
create_install_disk.execute_parted_command(device, "mkpart primary 2GiB, -1")
# wait for udev to refresh partition info
create_install_disk.sync_udev()
boot_partition = create_install_disk.get_partition(device, 1)
physical_volume = create_install_disk.get_partition(device, 2)
# format boot partition
subprocess.check_call(["mkfs.vfat","-F","32",boot_partition])
# get boot partition uuid
boot_partition_uuid = create_install_disk.get_partition_uuid(boot_partition)
# setup lvm
vgname = "wbvg-" + boot_partition_uuid
lvname = "profile"
shutdown_vgs() # this needs to be done again right before pvcreate
subprocess.check_call(["pvcreate","-ffy",physical_volume], close_fds=True)
create_install_disk.execute_parted_command(device, "set 2 lvm on")
subprocess.check_call(["vgcreate","--yes","--addtag=@wbvg",vgname, physical_volume], close_fds=True)
subprocess.check_call(["lvcreate","--yes","--addtag=@wbprofile","-n",lvname,"-L","1G",vgname], close_fds=True)
create_install_disk.sync_udev()
# detect vga mode if necessary
if xen_vga is None and not is_kms_compatible_system(): xen_vga="DETECT"
if xen_vga == "DETECT": xen_vga = determine_xen_vga_mode()
with create_install_disk.tempmount(boot_partition, "rw", "vfat") as tmpdir:
# install bootloader
os.makedirs("%s/boot/grub" % tmpdir)
os.makedirs("%s/EFI/BOOT" % tmpdir)
if bios_compatible: subprocess.check_call(["grub-install","--target=i386-pc","--recheck","--boot-directory=%s/boot" % tmpdir,device])
subprocess.check_call(["grub-mkimage","-p","/boot/grub","-o","%s/EFI/BOOT/bootx64.efi" % tmpdir,"-O","x86_64-efi"] + create_install_disk.GRUB_MODULES)
# boot config
with open("%s/boot/grub/grub.cfg" % tmpdir, "w") as f:
f.write("loopback loop /walbrix\n")
f.write("source (loop)/grub.cfg\n")
with open("%s/boot/grub/walbrix.cfg" % tmpdir, "w") as f:
f.write("set WALBRIX_BOOT=UUID=%s\n" % boot_partition_uuid)
if xen_vga is not None: f.write("set WALBRIX_XEN_VGA=%s\n" % xen_vga)
# copy system image
print "Installing Walbrix..."
image_dest = "%s/walbrix" % tmpdir
if magic.from_buffer(open(image).read(65536)).startswith("ISO 9660"):
subprocess.check_call(["iso-read","-i",image,"-e","/walbrix","-o",image_dest])
if stat.S_ISBLK(os.stat(device)[stat.ST_MODE]):
print "Done. Ejecting install disk..."
subprocess.call(["eject",image])
else:
shutil.copy(image, image_dest)
subprocess.call(["sync"])
print "Installing EFI xen..."
os.makedirs("%s/EFI/Walbrix" % tmpdir)
with create_install_disk.tempmount(image_dest, "-o ro,loop", "squashfs") as squashfs:
shutil.copy("%s/x86_64/usr/lib64/efi/xen.efi" % squashfs, "%s/EFI/Walbrix/xen.efi" % tmpdir)
shutil.copy("%s/x86_64/boot/kernel" % squashfs, "%s/EFI/Walbrix/kernel" % tmpdir)
shutil.copy("%s/x86_64/boot/initramfs" % squashfs, "%s/EFI/Walbrix/initramfs" % tmpdir)
with open("%s/EFI/Walbrix/xen.cfg" % tmpdir, "w") as f:
f.write("[global]\ndefault=Walbrix\n\n")
f.write("[Walbrix]\n")
f.write("options=dom0_mem=512M,max:512M\n")
f.write("kernel=kernel dolvm domdadm scandelay edd=off walbrix.boot=UUID=%s splash=silent,theme:wb console=tty1 quiet nomodeset\n" % boot_partition_uuid)
f.write("ramdisk=initramfs\n")
subprocess.call(["sync"])
# format profile volume
profile_volume = "/dev/%s/profile" % vgname
subprocess.check_call(["mkfs.xfs","-q",profile_volume])
# install ins file if exists
ins_file = image + ".ins"
if os.path.isfile(ins_file):
with create_install_disk.tempmount(profile_volume, "rw", "xfs") as tempdir:
rw_layer = os.path.join(tempdir,"root")
os.mkdir(rw_layer)
subprocess.call(["tar","xvf",ins_file,"-C",rw_layer])
print "Done."
return True
help="Don't install bootloader for BIOS(UEFI only)")
parser.add_argument("--yes",
"-y",
action="store_true",
help="Proceed without confirmation")
parser.add_argument("--xen-vga",
type=str,
nargs='?',
const="DETECT",
help="Specify Xen's vga= option")
parser.add_argument("device", type=str, nargs='?', help="target device")
args = parser.parse_args()
device = args.device
if device is None:
usable_disks = create_install_disk.usable_disks(
int(MINIMUM_DISK_SIZE_IN_GB * 1000000000))
num_disk = len(usable_disks)
if num_disk < 1:
print "There are not usable disks on this system."
sys.exit(1)
elif num_disk > 1:
print "Target disk(typically /dev/sda) must be specified. Usable disks are:"
create_install_disk.print_disk_info(usable_disks)
sys.exit(1)
else:
device = usable_disks[0]["name"]
image = args.image if args.image is not None else detect_install_image()
if not run(device, image, args.yes, args.no_bios, args.xen_vga):
sys.exit(1)
for line in subprocess.check_output(["lsblk","-nd","--raw","-o","NAME,FSTYPE"]).splitlines():
line = line.split()
if len(line) > 1 and line[1] == "iso9660":
return "/dev/%s" % line[0]
raise Exception("No usable install image")
if __name__ == '__main__':
parser = argparse.ArgumentParser()
parser.add_argument("--image", type=str, help="System image file to install")
parser.add_argument("--no-bios", action="store_true", help="Don't install bootloader for BIOS(UEFI only)")
parser.add_argument("--yes", "-y", action="store_true", help="Proceed without confirmation")
parser.add_argument("--xen-vga", type=str, nargs='?', const="DETECT", help="Specify Xen's vga= option")
parser.add_argument("device", type=str, nargs='?', help="target device")
args = parser.parse_args()
device = args.device
if device is None:
usable_disks = create_install_disk.usable_disks(int(MINIMUM_DISK_SIZE_IN_GB * 1000000000))
num_disk = len(usable_disks)
if num_disk < 1:
print "There are not usable disks on this system."
sys.exit(1)
elif num_disk > 1:
print "Target disk(typically /dev/sda) must be specified. Usable disks are:"
create_install_disk.print_disk_info(usable_disks)
sys.exit(1)
else:
device = usable_disks[0]["name"]
image = args.image if args.image is not None else detect_install_image()
if not run(device, image, args.yes, args.no_bios, args.xen_vga): sys.exit(1)
