def _qCurveToOne(self, bcp, pt):
bounds = self.bounds
bounds = updateBounds(bounds, pt)
if not pointInRect(bcp, bounds):
bounds = unionRect(
bounds, calcQuadraticBounds(self._getCurrentPoint(), bcp, pt))
self.bounds = bounds
def _qCurveToOne(self, bcp, pt): bounds = self.bounds bounds = updateBounds(bounds, pt) if not pointInRect(bcp, bounds): bounds = unionRect(bounds, calcQuadraticBounds( self._getCurrentPoint(), bcp, pt)) self.bounds = bounds
def recalcBounds(self, glyfTable):
coords, endPts, flags = self.getCoordinates(glyfTable)
if len(coords) > 0:
if 0:
# This branch calculates exact glyph outline bounds
# analytically, handling cases without on-curve
# extremas, etc. However, the glyf table header
# simply says that the bounds should be min/max x/y
# "for coordinate data", so I suppose that means no
# fancy thing here, just get extremas of all coord
# points (on and off). As such, this branch is
# disabled.
# Collect on-curve points
onCurveCoords = [coords[j] for j in range(len(coords))
if flags[j] & flagOnCurve]
# Add implicit on-curve points
start = 0
for end in endPts:
last = end
for j in range(start, end + 1):
if not ((flags[j] | flags[last]) & flagOnCurve):
x = (coords[last][0] + coords[j][0]) / 2
y = (coords[last][1] + coords[j][1]) / 2
onCurveCoords.append((x,y))
last = j
start = end + 1
# Add bounds for curves without an explicit extrema
start = 0
for end in endPts:
last = end
for j in range(start, end + 1):
if not (flags[j] & flagOnCurve):
next = j + 1 if j < end else start
bbox = calcBounds([coords[last], coords[next]])
if not pointInRect(coords[j], bbox):
# Ouch!
warnings.warn("Outline has curve with implicit extrema.")
# Ouch! Find analytical curve bounds.
pthis = coords[j]
plast = coords[last]
if not (flags[last] & flagOnCurve):
plast = ((pthis[0]+plast[0])/2, (pthis[1]+plast[1])/2)
pnext = coords[next]
if not (flags[next] & flagOnCurve):
pnext = ((pthis[0]+pnext[0])/2, (pthis[1]+pnext[1])/2)
bbox = calcQuadraticBounds(plast, pthis, pnext)
onCurveCoords.append((bbox[0],bbox[1]))
onCurveCoords.append((bbox[2],bbox[3]))
last = j
start = end + 1
self.xMin, self.yMin, self.xMax, self.yMax = calcIntBounds(onCurveCoords)
else:
self.xMin, self.yMin, self.xMax, self.yMax = calcIntBounds(coords)
else:
self.xMin, self.yMin, self.xMax, self.yMax = (0, 0, 0, 0)
def recalcBounds(self, glyfTable):
coords, endPts, flags = self.getCoordinates(glyfTable)
if len(coords) > 0:
if 0:
# This branch calculates exact glyph outline bounds
# analytically, handling cases without on-curve
# extremas, etc. However, the glyf table header
# simply says that the bounds should be min/max x/y
# "for coordinate data", so I suppose that means no
# fancy thing here, just get extremas of all coord
# points (on and off). As such, this branch is
# disabled.
# Collect on-curve points
onCurveCoords = [coords[j] for j in range(len(coords))
if flags[j] & flagOnCurve]
# Add implicit on-curve points
start = 0
for end in endPts:
last = end
for j in range(start, end + 1):
if not ((flags[j] | flags[last]) & flagOnCurve):
x = (coords[last][0] + coords[j][0]) / 2
y = (coords[last][1] + coords[j][1]) / 2
onCurveCoords.append((x,y))
last = j
start = end + 1
# Add bounds for curves without an explicit extrema
start = 0
for end in endPts:
last = end
for j in range(start, end + 1):
if not (flags[j] & flagOnCurve):
next = j + 1 if j < end else start
bbox = calcBounds([coords[last], coords[next]])
if not pointInRect(coords[j], bbox):
# Ouch!
warnings.warn("Outline has curve with implicit extrema.")
# Ouch! Find analytical curve bounds.
pthis = coords[j]
plast = coords[last]
if not (flags[last] & flagOnCurve):
plast = ((pthis[0]+plast[0])/2, (pthis[1]+plast[1])/2)
pnext = coords[next]
if not (flags[next] & flagOnCurve):
pnext = ((pthis[0]+pnext[0])/2, (pthis[1]+pnext[1])/2)
bbox = calcQuadraticBounds(plast, pthis, pnext)
onCurveCoords.append((bbox[0],bbox[1]))
onCurveCoords.append((bbox[2],bbox[3]))
last = j
start = end + 1
self.xMin, self.yMin, self.xMax, self.yMax = calcIntBounds(onCurveCoords)
else:
self.xMin, self.yMin, self.xMax, self.yMax = calcIntBounds(coords)
else:
self.xMin, self.yMin, self.xMax, self.yMax = (0, 0, 0, 0)
def test_calcQuadraticBounds():
assert calcQuadraticBounds((0, 0), (50, 100),
(100, 0)) == (0, 0, 100, 50.0)
assert calcQuadraticBounds((0, 0), (100, 0),
(100, 100)) == (0.0, 0.0, 100, 100)
def test_calcQuadraticBounds():
assert calcQuadraticBounds(
(0, 0), (50, 100), (100, 0)) == (0, 0, 100, 50.0)
assert calcQuadraticBounds(
(0, 0), (100, 0), (100, 100)) == (0.0, 0.0, 100, 100)
arrayTools.calcBounds(
[pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3])
print time.time() - n
print "pointsInRect\t\t\t",
n = time.time()
for i in range(c):
arrayTools.pointsInRect(
[pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt4],
rect)
print time.time() - n
print "calcQuadraticBounds\t\t",
n = time.time()
for i in range(c):
bezierTools.calcQuadraticBounds(pt1, pt2, pt3)
print time.time() - n
print "calcCubicBounds\t\t\t",
n = time.time()
for i in range(c):
bezierTools.calcCubicBounds(pt1, pt2, pt3, pt4)
print time.time() - n
print
##############
print "no-numpy"
print "calcQuadraticParameters\t\t",
n = time.time()
for i in range(c):
print "calcBounds\t\t\t",
n = time.time()
for i in range(c):
arrayTools.calcBounds([pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3])
print time.time() - n
print "pointsInRect\t\t\t",
n = time.time()
for i in range(c):
arrayTools.pointsInRect([pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt1, pt2, pt3, pt4], rect)
print time.time() - n
print "calcQuadraticBounds\t\t",
n = time.time()
for i in range(c):
bezierTools.calcQuadraticBounds(pt1, pt2, pt3)
print time.time() - n
print "calcCubicBounds\t\t\t",
n = time.time()
for i in range(c):
bezierTools.calcCubicBounds(pt1, pt2, pt3, pt4)
print time.time() - n
print
##############
print "no-numpy"
print "calcQuadraticParameters\t\t",
n = time.time()
for i in range(c):
