def restart_and_reconnect():
print('Failed to connect to MQTT broker. Reconnecting...')
time.sleep(10)
machine.reset()
d = dht.DHT11(machine.Pin(15))
def measure_temp(c):
topic = "api/v1/%s/me/measurement" % MQTT_TOKEN
try:
d.measure()
c.publish(topic, "dht,measure=temp value=%d" % (d.temperature()))
c.publish(topic, "dht,measure=humi value=%d" % (d.humidity()))
except:
pass
try:
connect_to_wifi()
client = connect_to_mqtt()
tmr = Timer(-1)
tmr.init(period=2000,
mode=Timer.PERIODIC,
callback=lambda t: measure_temp(client))
while True:
client.wait_msg()
except:
restart_and_reconnect()
def init_timers():
timer_attitude_ctrl = Timer(1)
timer_attitude_ctrl.init(period=50, mode=Timer.PERIODIC, callback=callback_attitude_ctrl)
timer_imu_update = Timer(2)
timer_imu_update.init(period=200, mode=Timer.PERIODIC, callback=callback_imu_update)
time.sleep_ms(500)
def GNSS_info_update(timer):
GNSS.GNSS_Read()
GNSS.GNSS_Parese()
lcd.draw_string(0, 40, "Date: " + GNSS.date, lcd.BLACK, lcd.WHITE)
lcd.draw_string(0, 60, "UTC Time: " + GNSS.UTC_Time, lcd.BLACK, lcd.WHITE)
lcd.draw_string(0, 80, "latitude: " + GNSS.latitude + GNSS.N_S, lcd.BLACK,
lcd.WHITE)
lcd.draw_string(0, 100, "longitude: " + GNSS.longitude + GNSS.E_W,
lcd.BLACK, lcd.WHITE)
lcd.draw_string(0, 120, "Speed: " + str(GNSS.speed_to_groud_kh) + "km/h",
lcd.BLACK, lcd.WHITE)
lcd.draw_string(0, 140,
"Course_over_ground: " + str(GNSS.course_over_ground),
lcd.BLACK, lcd.WHITE)
GNSS.print_GNSS_info()
tim = Timer(Timer.TIMER0,
Timer.CHANNEL0,
mode=Timer.MODE_PERIODIC,
period=3000,
callback=GNSS_info_update)
tim.start()
while True:
img = sensor.snapshot()
lcd.display(img)
def __init__(self, g, log, host='192.168.32.69'):
self.tim = Timer(-1)
self.reporter = Reporter(g, host, log)
self.display = False
0, (addr >> 24) & 0xFF, (addr >> 16) & 0xFF, (addr >> 8) & 0xFF,
addr & 0xFF
]))
spi.write(data)
cs.off()
ctrl(4)
ctrl(0)
# mount SD can load initial bitstream
try:
os.mount(SDCard(slot=3), "/sd")
import ecp5
#ecp5.prog("/sd/c64/bitstreams/ulx3s_85f_v20_c64_origrom.bit")
except:
print("check SD and ecp5.py")
# initialization
gc.collect()
init_spi()
alloc_emergency_exception_buf(100)
enable = bytearray(1)
timer = Timer(3)
init_fb()
read_dir()
irq_handler(0) # service eventual pending/stale IRQ
# activate IRQ service
irq_handler_ref = irq_handler # allocation happens here
spi_request = Pin(0, Pin.IN, Pin.PULL_UP)
spi_request.irq(trigger=Pin.IRQ_FALLING, handler=irq_handler_ref)
print(dic)
refind(dic)
def refind(dicc):
match0 = re.search(r"{\"powerstate\":(.*?)}", dicc) #获取灯的开关信息
if match0:
value0 = eval(match0.group(1))
led.value(value0)
try:
client = MQTTClient(CLIENT_ID, SERVER, PORT, username, password, 60)
print(client)
client.set_callback(sub_cb)
client.connect() #connect mqtt
client.subscribe(subscribe_TOPIC)
print("Connected to %s, subscribed to %s topic" %
(SERVER, subscribe_TOPIC))
timer = Timer(0)
timer.init(mode=Timer.PERIODIC, period=5000, callback=Dataupload)
while True:
client.wait_msg()
except Exception as ex_results:
print('exception1', ex_results)
finally:
if (client is not None):
client.disconnect()
#print('{3:02d}:{4:02d}:{5:02d}'.format(*localtime))
#
oled.fill(0)
oled.text(haftaninGUNU[localtime[6]], 8, 8)
oled.text('{0:04d}-{1:02d}-{2:02d}'.format(*localtime), 8, 24)
oled.text('{3:02d}:{4:02d}:{5:02d}'.format(*localtime), 8, 40)
#
oled.show()
#timer objesi olusturmak
def tmr1_kesmesi(timer):
global dakikasayaci # global degiskeni localde kullanmak için
dakikasayaci = dakikasayaci + 1 # bu daha kısa yazılabilir mi?
if dakikasayaci >= 59:
ntpGuncelle()
dakikasayaci = 0
ntpOLEDyazdir()
#aga baglımıyım testi
if wifi.isconnected():
Led_status.value(1 - Led_status.value()) #yanık
else:
Led_status.value(1) #sonuk
from machine import Timer
tmr1 = Timer(-1) # sanal zamanlayici olustur
tmr1.init(period=1000, mode=Timer.PERIODIC, callback=tmr1_kesmesi)
#timer objesi olusturmak
LEFT_SCROLL = 0x27 DUMMY_BYTE_0 = 0x00 DUMMY_BYTE_F = 0xFF PAGE_7 = 0x07 FRAMES_5 = 0x00 PAGE_0 = 0x00 # setup pins button_a = Pin(12, Pin.IN, Pin.PULL_UP) button_b = Pin(13, Pin.IN, Pin.PULL_UP) button_c = Pin(14, Pin.IN, Pin.PULL_UP) adc = ADC(0) alarm_led= Pin(2, Pin.OUT) # initalize timers tim = Timer(-1) tim2 = Timer(-1) tim3 = Timer(-1) tim4 = Timer(-1) rtc = machine.RTC() # initialize oled screen i2c = I2C(scl=Pin(5), sda=Pin(4), freq=100000) oled = ssd1306.SSD1306_I2C(128,32,i2c) alarm_led.value(not alarm_led.value()) #initialize adxl345 spi = machine.SPI(baudrate=100000, polarity=0, phase=0, sck=machine.Pin(16), mosi=machine.Pin(0), miso=machine.Pin(15)) cs = machine.Pin(2,machine.Pin.OUT) class My_time(object):
'''
定时器演示实例， 打印定时器，讲解定时器的属性。
'''
from machine import Timer
import utime
timer = Timer(1)
def timer_print(timer):
# 打印当前的计数
print("Timer InteruptCount , counter= %d" % (timer.value()))
print(timer)
'''
定时器 模式：
Timer.ONE_SHOT --- 0 -- # 执行一次
Timer.PERIODIC --- 1 -- # 循环执行
'''
# timer.init(period=3000, mode=Timer.PERIODIC , callback=timer_print) #这里直接在回调函数中打印tim状态信息
timer.init(period=1000,
mode=Timer.PERIODIC,
callback=lambda t: print("Counter: %d" % (t.value())))
try:
while True:
print("do something..., counter = %d" % (timer.value()))
utime.sleep_ms(100)
except:
def continuous_mode(self):
self.my_timer = Timer(1)
self.my_timer.init(period=1000,
mode=self.my_timer.PERIODIC,
callback=self.my_callback)
def sub_cb(topic, msg):
global sessionID, Sensor_Data, ack
global temp
print((topic, msg))
if topic == b'Sensor_Data':
Sensor_Data = msg
c = MQTTClient(client_id = ubinascii.hexlify(machine.unique_id()), \
server = 'm15.cloudmqtt.com',user='******', password='******',port ='16060')
c.set_callback(sub_cb)
c.connect()
c.subscribe(b"Sensor_Data")
####publish message on the sessionID every one second
tim = Timer(0)
counter = 0
ack = 1
temp = 0
temp1 = 0
def handleInterrupt(tim):
global temp
global temp1
global counter
global ack
if ack == 1:
#temp1 = temp
temp = bytes([random.getrandbits(5)])
from machine import Timer
def aaa(self):
"""
docstring
"""
print("arostnaorien")
t1 = Timer(1)
t1.init(mode=Timer.PERIODIC, period=300, callback=aaa)
from machine import Timer
from machine import LED
tim = Timer(1, mode=Timer.PERIODIC) #创建Timer 1为一个频率定期运行对象
tim_a = tim.channel(Timer.CH_0, freq=1) #创建Timer A其频率为1Hz
l = LED(1)
led_off = 2
led_on = 3
irq_count = 0
def toggle(t): #中断回调函数
global irq_count
if irq_count < led_off:
l.off()
else:
l.on()
if irq_count < (led_off + led_on - 1):
irq_count = irq_count + 1
else:
irq_count = 0
tim_a.irq(trigger=Timer.TIMEOUT, handler=toggle) #回调函数将使用设置的频率定期执行中断
import machine
from machine import Pin, Timer
import time
led = Pin(2, Pin.OUT)
def toggleLED(timer):
led.value(not led.value())
tim4 = Timer(4)
tim4.init(period=300, mode=machine.Timer.PERIODIC, callback=toggleLED)
time.sleep(20)
tim4.deinit()
# PWM.
#
##################################################
# import
##################################################
import time
from machine import Timer, PWM
from board import board_info
from fpioa_manager import fm
##################################################
# main
##################################################
# タイマー設定
tim = Timer(Timer.TIMER0, Timer.CHANNEL0, mode=Timer.MODE_PWM)
# PWM出力ピン設定
ch = PWM(tim, freq=500000, duty=50, pin=board_info.LED_W)
# ループ
duty = 0
dir = True
while True:
if dir:
duty += 10
else:
duty -= 10
if 100 < duty:
duty = 100
dir = False
raise Exception(
"Config error: InfluxDB URL is not set. Check configuration")
if idb is None:
raise Exception(
"Config error: InfluxDB Database is not set. Check configuration")
if imetric is None:
raise Exception("Config error: InfluxDB Metric is not set")
influx = InfluxDB(iurl, idb, iusr, ipsw, imetric, place=iplace)
print("influx: ", iurl, idb)
except Exception as e:
print("config Exception: {0}".format(e))
print("Use config.setup()")
exit(1)
display = disp7_init()
display.show("wifiConn")
net = WiFiConnect()
net.connect()
display.show("timer on")
tim1 = Timer(0) # for main 10 sec timer
timer_init(tim1)
# --- run ---
print("--- run ---")
# print("RAM free: " + str(mem_free()))
print("Oh Yes! Get connected")
print("Connected to " + str(wlan.config("essid")))
print("MAC Address: " + str(ubinascii.hexlify(wlan.config('mac'), ':').decode()))
print("IP Address: " + wlan.ifconfig()[0])
connect()
#Clock UTC time
ntptime.settime()
rtc = RTC()
year, month, day, weekday, hours, minutes, seconds, microseconds = rtc.datetime()
rtc.datetime((year, month, day, weekday, hours - 4, minutes, seconds, microseconds))
ntptime.host = "pool.ntp.org"
#Hardware timer - 1
tim1 = Timer(1)
tim1.init(period=15000, mode=Timer.PERIODIC, callback=lambda t:printtime(rtc.datetime()))
#Variables
#LEDs
green = Pin(21, Pin.OUT)
red = Pin(32, Pin.OUT)
#Buttons
button_red = Pin(25, Pin.IN, Pin.PULL_DOWN)
button_green = Pin(26, Pin.IN, Pin.PULL_DOWN)
#Touchpad
tpin = TouchPad(Pin(27))
tpin_green = TouchPad(Pin(33))
释放资源
备注 ADC没有deinit方法
'''
# 释放ADC资源
# self.adc.deinit()
pass
if __name__ == '__main__':
'''
测量电池电压
'''
from car_config import gpio_dict
# from battery_voltage import BatteryVoltage
from machine import Timer
bv = BatteryVoltage(gpio_dict['BATTERY_ADC'], is_debug=True)
# 创建一个定时器
timer = Timer(1)
# 每隔100ms执行一次 10s 判断一次电池电压是否过放
timer.init(period=100, mode=Timer.PERIODIC, callback=bv.callback)
try:
while True:
pass
except:
# 释放定时器资源
timer.deinit()
# 释放ADC资源
bv.deinit()
import _thread
import padog
import time
from machine import Timer
from machine import UART
from padog import g, m
uart6 = UART(2, 115200)
t = Timer(1)
def OpenMV_Run(t):
command = ""
DIS = 0
if uart6.any():
read = uart6.read(1).decode('gbk')
while read != '/':
command = command + read
read = uart6.read(1).decode('gbk')
if (command != "1/") and command != "":
try:
exec(command)
print("exec:", command)
except:
print("execerr:", command)
command = ""
def app_1():
exec(open('web_c.py').read())
return json
def refresh():
nowRsp = nowWeather(API_KEY) #通过API密钥获取天气实况
dailyRsp = dailyWeather(API_KEY) #通过API密钥获取多日天气预报
today = dailyRsp['results'][0]['daily'][0]['date'][-5:] #当前日期，显示“月-日”
todayHigh = dailyRsp['results'][0]['daily'][0]['high'] #最高温度
todaylow = dailyRsp['results'][0]['daily'][0]['low'] #最低温度
nowText = nowRsp['results'][0]['now']['text'] #天气现象文字
nowTemper = nowRsp['results'][0]['now']['temperature'] #温度
todayIco = nowRsp['results'][0]['now']['code'] #天气现象图标
city = nowRsp['results'][0]['location']['name'] #地理位置
oled.fill(0)
oled.bitmap(10, 23, weather_icon.from_code(int(todayIco)), 38, 38,
1) #显示当前天气现象图标
oled.DispChar("%s,天气实况" % city, 0, 0)
oled.DispChar(today, 90, 0)
oled.DispChar("%s℃/%s" % (nowTemper, nowText), 70, 25) #显示当前温度
oled.DispChar("%s~%s℃" % (todaylow, todayHigh), 70, 45) #显示今日最低、最高气温
oled.show()
refresh() #数据更新
tim1 = Timer(1)
tim1.init(period=1800000, mode=Timer.PERIODIC,
callback=lambda _: refresh()) #定时，每半个钟刷新一次
def __init__(self, geiger):
self.geiger = geiger
self.tim = Timer(-1)
self.acc = Accumulator()
self.display = False
_OneNET_msg_list = []
def OneNET_callback(_topic, _msg):
global _OneNET_msg_list
try:
_msg = _msg.decode('utf-8', 'ignore')
except:
print(_msg)
return
OneNET_recv(_msg)
if _msg in _OneNET_msg_list:
eval('OneNET_recv_' + bytes.decode(ubinascii.hexlify(_msg)) + '()')
tim14 = Timer(14)
_iot_count = 0
def timer14_tick(_):
global _iot, _iot_count
_iot_count = _iot_count + 1
if _iot_count == 1000:
_iot.ping()
_iot_count = 0
try:
_iot.check_msg()
except:
machine.reset()
# adress i2c module LCD
i2c_address = 0x3F # decimaal 63
# i2c en lcd instances
i2c = I2C(scl=Pin(21), sda=Pin(22))
lcd = I2cLcd(i2c, i2c_address, 2, 16)
# localtime instance
lt = LocalTime(1, debug=False)
# instellen RTC op esp32
lt.startInternetTime()
# haal iedere seconde de tijd op
timer1 = Timer(0)
timer1.init(period=1000, mode=Timer.PERIODIC, callback=getTime)
try:
# oneindige lus
while True:
# LCD scherm leegmaken
lcd.clear()
# toon de tijd op LCD scherm
lcd.move_to(4, 0)
lcd.putstr(myGlobals.now)
# even wachten
utime.sleep_ms(500)
except Exception as E:
print('Fout: ', E)
button = Pin(34, Pin.IN)
year = int(input("Year? "))
month = int(input("Month? "))
day = int(input("Day? "))
weekday = int(input("Weekday? "))
hour = int(input("Hour? "))
minute = int(input("Minute? "))
second = int(input("Second? "))
microsecond = int(input("Microsecond? "))
rtc = RTC()
rtc.datetime((year, month, day, weekday, hour, minute, second, microsecond))
adc = ADC(Pin(36))
adc.atten(ADC.ATTN_11DB)
tim0 = Timer(0)
week = [
"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday",
"Sunday"
]
tim0.init(period=30000, mode=Timer.PERIODIC, callback=lambda t: display())
tim1 = Timer(1)
tim1.init(period=100, mode=Timer.PERIODIC, callback=lambda t: choice())
pwm0 = PWM(Pin(16), freq=10, duty=256)
pwm1 = PWM(Pin(17), freq=10, duty=256)
mode = 0
prev = 0
def choice():
if mode == 1:
#!/usr/bin/env python
# coding: utf-8
'''
@File :boot.py
@Author :youxinweizhi
@Date :2020/7/16
@Github :https://github.com/youxinweizhi
'''
import machine
from machine import Timer
t1 = Timer(2)
def timer_wifi(f):
if wifi.isconnected():
pass
else:
do_connect()
def is_legal_wifi(essid, password):
'''
判断WIFI密码是否合法
'''
if len(essid) == 0 or len(password) == 0:
return False
return True
def do_connect():
from machine import Timer
def on_timer(timer):
#print("time up:",timer)
#print("param:",timer.callback_arg())
timer.callback_arg().state()
try:
# default: maix dock / maix duino set shift=0
t = maix_asr(0x500000, I2S.DEVICE_0, 3, shift=0) # maix bit set shift=1
tim = Timer(Timer.TIMER0,
Timer.CHANNEL0,
mode=Timer.MODE_PERIODIC,
period=64,
callback=on_timer,
arg=t)
tim.start()
#for i in range(50):
#time.sleep_ms(100)
#t.stop()
#for i in range(50):
#time.sleep_ms(100)
#t.run()
t.config({
'xiao-ai-ya': 0.3,
'hao-de-ya': 0.2,
'ni-hao-ya': 0.3,
class Wifi(object):
# rtc=Rtc()
c = None
ssid = ""
password = ""
server = ""
led = Pin(2, Pin.OUT, value=1)
button = Pin(0, Pin.IN)
clients = ubinascii.hexlify(machine.unique_id())
client = clients.decode()
topic = b"kembang"
state = ""
timer = Timer(0)
timer2 = Timer(1)
status = 0
nyala_pada_1 = ""
nyala_pada_2 = ""
nyala_pada_3 = ""
nyala_pada_4 = ""
mati_pada_1 = ""
mati_pada_2 = ""
mati_pada_3 = ""
mati_pada_4 = ""
waktu = ""
# menit=0
def __init__(self, *args, **kwargs):
super(Wifi, self).__init__(*args, **kwargs)
self.button.irq(trigger=Pin.IRQ_RISING, handler=self.func)
self.start_ap()
self.start_mqtt()
def tim2(self, dt):
pass
def func(self, dt):
self.ap()
def start_ap(self):
print("menunggu....")
time.sleep(5)
if station.isconnected() == True:
print("sudah konek")
return
self.ap()
def ap(self):
self.timer.deinit()
station.disconnect()
while (wlan.ifconfig()[0] == '0.0.0.0'):
time.sleep(1)
print(wlan.ifconfig())
try:
print("tcp sedang menuggu")
ip = wlan.ifconfig()[0]
s = socket.socket()
s.bind(("192.168.4.1", 800))
s.listen(1)
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
station.disconnect()
while True:
if self.status == 1:
break
print("acepting....")
conn, addr = s.accept()
print(addr, "connected")
while True:
data = conn.recv(1024)
if (len(data) == 0):
print("close socket")
conn.close()
break
print(data)
str_data = data.decode()
print(str_data)
if "connect" in str_data:
print("conceting AP")
paket = str_data.split("-")
print(paket)
t = ("ssid=\"{}\"".format(paket[1]),
"pwd=\"{}\"".format(paket[2]),
"server=\"{}\"".format(paket[3]))
print(t)
f = open("net.py", "w")
f.write("\n".join(t))
f.close()
self.server = paket[3]
print(self.server)
station.connect(paket[1], paket[2])
conn.send("data diterima")
if str_data == "scan":
lis = []
nets = station.scan()
for nt in nets:
name = str(nt[0], 'utf8')
lis.append(name)
print(lis)
conn.send(str(lis))
if str_data == "exit":
self.status = 1
break
if str_data == "tanya":
print(station.isconnected())
if station.isconnected() == True:
conn.send("terhubung")
return self.start_mqtt()
self.status = 1
break
else:
conn.send("belum terhubung")
except:
print("gagal c*k")
if (s):
s.close()
wlan.active(False)
def start_mqtt(self):
try:
self.c = MQTTClient(self.clients, net.server)
self.c.connect()
except:
self.c = MQTTClient(self.clients, self.server)
self.c.connect()
try:
print("mulai mqtt")
self.c.set_callback(self.sub_cb)
self.c.subscribe(self.topic)
self.c.subscribe(b"waktu")
self.c.subscribe(b"nyala_pada_1")
self.c.subscribe(b"nyala_pada_2")
self.c.subscribe(b"nyala_pada_3")
self.c.subscribe(b"nyala_pada_4")
self.c.subscribe(b"mati_pada_1")
self.c.subscribe(b"mati_pada_2")
self.c.subscribe(b"mati_pada_3")
self.c.subscribe(b"mati_pada_4")
print("Connected to %s, subscribed to %s topic" %
(self.server, self.topic))
while 1:
self.timer.deinit()
self.state = "terhubung"
self.c.wait_msg()
except:
print("pedot")
self.state = "terputus"
self.timer.init(period=1000, callback=self.tim)
def sub_cb(self, topic, msg):
strtopic = topic.decode()
message = msg.decode()
if "waktu" in strtopic:
self.waktu = message
elif self.client + "add" in strtopic:
self.c.publish(self.clients + b"lampu", b"[lampu,on,off]")
elif self.client + "nyala_pada_1" in strtopic:
self.nyala_pada_1 = message
elif self.client + "nyala_pada_2" in strtopic:
self.nyala_pada_2 = message
elif self.client + "nyala_pada_3" in strtopic:
self.nyala_pada_3 = message
elif self.client + "nyala_pada_4" in strtopic:
self.nyala_pada_4 = message
elif self.client + "mati_pada_1" in strtopic:
self.mati_pada_1 = message
elif self.client + "mati_pada_2" in strtopic:
self.mati_pada_2 = message
elif self.client + "mati_pada_3" in strtopic:
self.mati_pada_3 = message
elif self.client + "mati_pada_4" in strtopic:
self.mati_pada_4 = message
elif self.waktu == self.nyala_pada_1:
self.led.value(0)
elif self.waktu == self.nyala_pada_2:
self.led.value(0)
elif self.waktu == self.nyala_pada_3:
self.led.value(0)
elif self.waktu == self.nyala_pada_4:
self.led.value(0)
elif self.waktu == self.mati_pada_1:
self.led.value(1)
elif self.waktu == self.mati_pada_2:
self.led.value(1)
elif self.waktu == self.mati_pada_3:
self.led.value(1)
elif self.waktu == self.mati_pada_4:
self.led.value(1)
elif msg == b"on":
self.led.value(0)
# self.c.publish(self.client,b"saya client")
elif msg == b"off":
self.led.value(1)
print(self.waktu)
print(self.client)
print(self.nyala_pada_1)
def tim(self, dt):
print(station.isconnected())
if self.state == "terputus":
self.start_mqtt()
else:
self.timer.deinit()
# Example using PIO to create a UART TX interface
from machine import Pin, Timer
from rp2 import PIO, StateMachine, asm_pio
import utime
# blink the LED, for the comfort of the viewer:
led = Pin(25, Pin.OUT)
tim = Timer()
def tick(timer):
global led
led.toggle()
tim.init(freq=2.5, mode=Timer.PERIODIC, callback=tick)
# do the useful work - flood 8 UARTS with noncence:
#UART_BAUD = 115200
UART_BAUD = 57600
PIN_BASE = 10
NUM_UARTS = 8
@asm_pio(sideset_init=PIO.OUT_HIGH,
out_init=PIO.OUT_HIGH,
out_shiftdir=PIO.SHIFT_RIGHT)
def uart_tx():
# Block with TX deasserted until data available
datetime = rtc.datetime() # 获取当前时间
oled.fill(0) # 清屏显示黑色背景
oled.text('01Studio', 0, 0) # 首行显示01Studio
oled.text('RTC Clock', 0, 15) # 次行显示实验名称
# 显示日期，字符串可以直接用“+”来连接
oled.text(
str(datetime[0]) + '-' + str(datetime[1]) + '-' + str(datetime[2]) +
' ' + week[datetime[3]], 0, 40)
# 显示时间需要判断时、分、秒的值否小于10，如果小于10，则在显示前面补“0”以达
# 到较佳的显示效果
for i in range(4, 7):
if datetime[i] < 10:
time_list[i - 4] = "0"
else:
time_list[i - 4] = ""
# 显示时间
oled.text(
time_list[0] + str(datetime[4]) + ':' + time_list[1] +
str(datetime[5]) + ':' + time_list[2] + str(datetime[6]), 0, 55)
oled.show()
#开启RTOS定时器
tim = Timer(-1)
tim.init(period=300, mode=Timer.PERIODIC, callback=RTC_Run) #周期300ms
#distance traveled per slot = diameter of wheel = 2pi(2.5/2) / 20 slots = .4 in
counts_travel = int((-.0000002 * (float(max_code))**2 + .0036 *
(float(max_code)) + 2.41 + 2) / .4)
print('counts_travel: ' + str(counts_travel))
enc2.clear()
enc2.resume()
while enc2.count() < counts_travel:
print('straight: ' + str(enc2.count()))
pwm1.duty(100)
pwm2.duty(60)
pwm3.duty(100)
pwm4.duty(60)
temperature = imu.temperature
print('temperature: ' + str(temperature))
topic = "channels/" + "436089" + "/publish/" + "S2L5BJH71OCHNBLN"
message = "field1={}".format(temperature)
print("PUBLISH topic = {} message = {}".format(topic, message))
mqtt.publish(topic, message)
pwm1.duty(100)
pwm2.duty(100)
pwm3.duty(100)
pwm4.duty(100)
tm = Timer(1)
tm.init(period=7000, mode=tm.PERIODIC, callback=turn)