def test_avail():
# Get the available methods
method_list = available_emission_line_modeling_methods()
assert len(method_list) > 0, 'No emission-line-modeling methods available'
# For the available methods, make sure that the ancillary databases
# and templates can be loaded.
for method in method_list:
if method['artifacts'] is not None:
artdb = ArtifactDB.from_key(method['artifacts'])
if method['ism_mask'] is not None:
emldb = EmissionLineDB.from_key(method['ism_mask'])
if method['emission_lines'] is not None:
emldb = EmissionLineDB.from_key(method['emission_lines'])
if method['continuum_tpl_key'] is not None:
tpl = TemplateLibrary(method['continuum_tpl_key'],
match_resolution=False,
velscale_ratio=1,
spectral_step=1e-4,
log=True,
hardcopy=False)
if method['fitpar'] is None:
continue
if 'continuum_templates' in method['fitpar'].keys() \
and method['fitpar']['continuum_templates'] is not None:
tpl = TemplateLibrary(method['fitpar']['continuum_templates'],
match_resolution=False,
velscale_ratio=1,
spectral_step=1e-4,
log=True,
hardcopy=False)
def test_init_all():
wave = numpy.logspace(*numpy.log10([3600., 10000.]), 4563)
velscale = spectrum_velocity_scale(wave)
dbs = EmissionLineDB.available_databases()
for key in dbs.keys():
if 'MSK' in key:
continue
emldb = EmissionLineDB.from_key(key)
etpl = EmissionLineTemplates(wave, velscale, emldb=emldb)
def test_pixelmask():
specfile = data_test_file('MaNGA_test_spectra.fits.gz')
hdu = fits.open(specfile)
pixelmask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPSCMSK'))
assert numpy.sum(pixelmask.boolean(hdu['WAVE'].data, nspec=1)) == 489, \
'Incorrect number of masked pixels'
def test_sasuke():
# Read the data
specfile = data_test_file('MaNGA_test_spectra.fits.gz')
hdu = fits.open(specfile)
drpbm = DRPFitsBitMask()
flux = numpy.ma.MaskedArray(hdu['FLUX'].data,
mask=drpbm.flagged(
hdu['MASK'].data,
MaNGADataCube.do_not_fit_flags()))
ferr = numpy.ma.power(hdu['IVAR'].data, -0.5)
flux[ferr.mask] = numpy.ma.masked
ferr[flux.mask] = numpy.ma.masked
nspec = flux.shape[0]
# Instantiate the template libary
velscale_ratio = 4
tpl = TemplateLibrary('MILESHC',
match_resolution=False,
velscale_ratio=velscale_ratio,
spectral_step=1e-4,
log=True,
hardcopy=False)
tpl_sres = numpy.mean(tpl['SPECRES'].data, axis=0)
# Get the pixel mask
pixelmask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPSCMSK'))
# Instantiate the fitting class
ppxf = PPXFFit(StellarContinuumModelBitMask())
# Perform the fit
sc_wave, sc_flux, sc_mask, sc_par \
= ppxf.fit(tpl['WAVE'].data.copy(), tpl['FLUX'].data.copy(), hdu['WAVE'].data, flux, ferr,
hdu['Z'].data, numpy.full(nspec, 100.), iteration_mode='no_global_wrej',
reject_boxcar=100, ensemble=False, velscale_ratio=velscale_ratio,
mask=pixelmask, matched_resolution=False, tpl_sres=tpl_sres,
obj_sres=hdu['SRES'].data, degree=8, moments=2)
# Mask the 5577 sky line
pixelmask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'))
# Read the emission line fitting database
emldb = EmissionLineDB.from_key('ELPMILES')
assert emldb['name'][
18] == 'Ha', 'Emission-line database names or ordering changed'
# Instantiate the fitting class
emlfit = Sasuke(EmissionLineModelBitMask())
# Perform the fit
el_wave, model, el_flux, el_mask, el_fit, el_par \
= emlfit.fit(emldb, hdu['WAVE'].data, flux, obj_ferr=ferr, obj_mask=pixelmask,
obj_sres=hdu['SRES'].data, guess_redshift=hdu['Z'].data,
guess_dispersion=numpy.full(nspec, 100.), reject_boxcar=101,
stpl_wave=tpl['WAVE'].data, stpl_flux=tpl['FLUX'].data,
stpl_sres=tpl_sres, stellar_kinematics=sc_par['KIN'],
etpl_sinst_mode='offset', etpl_sinst_min=10.,
velscale_ratio=velscale_ratio, matched_resolution=False)
# Rejected pixels
assert numpy.sum(emlfit.bitmask.flagged(el_mask, flag='PPXF_REJECT')) == 266, \
'Different number of rejected pixels'
# Unable to fit
assert numpy.array_equal(emlfit.bitmask.flagged_bits(el_fit['MASK'][5]), ['NO_FIT']), \
'Expected NO_FIT in 6th spectrum'
# No *attempted* fits should fail
assert numpy.sum(emlfit.bitmask.flagged(el_fit['MASK'], flag='FIT_FAILED')) == 0, \
'Fits should not fail'
# Number of used templates
assert numpy.array_equal(numpy.sum(numpy.absolute(el_fit['TPLWGT']) > 1e-10, axis=1),
[25, 22, 34, 32, 27, 0, 16, 22]), \
'Different number of templates with non-zero weights'
# No additive coefficients
assert numpy.all(el_fit['ADDCOEF'] == 0), \
'No additive coefficients should exist'
# No multiplicative coefficients
assert numpy.all(el_fit['MULTCOEF'] == 0), \
'No multiplicative coefficients should exist'
# Fit statistics
assert numpy.all(
numpy.absolute(
el_fit['RCHI2'] -
numpy.array([2.34, 1.22, 1.58, 1.88, 3.20, 0., 1.05, 0.88])) < 0.02
), 'Reduced chi-square are too different'
assert numpy.all(
numpy.absolute(el_fit['RMS'] - numpy.array(
[0.036, 0.019, 0.036, 0.024, 0.051, 0.000, 0.012, 0.012])) < 0.001
), 'RMS too different'
assert numpy.all(numpy.absolute(el_fit['FRMS'] -
numpy.array([0.021, 0.025, 0.025, 0.033, 0.018, 0.000,
1.052, 0.101])) < 0.001), \
'Fractional RMS too different'
assert numpy.all(numpy.absolute(el_fit['RMSGRW'][:,2] -
numpy.array([0.070, 0.038, 0.071, 0.047, 0.101, 0.000, 0.026,
0.024])) < 0.001), \
'Median absolute residual too different'
# All lines should have the same velocity
assert numpy.all(numpy.all(el_par['KIN'][:,:,0] == el_par['KIN'][:,None,0,0], axis=1)), \
'All velocities should be the same'
# Test velocity values
# TODO: Need some better examples!
assert numpy.all(numpy.absolute(el_par['KIN'][:,0,0] -
numpy.array([14704.9, 14869.3, 14767.1, 8161.9, 9258.7, 0.0,
5130.9, 5430.3])) < 0.1), \
'Velocities are too different'
# H-alpha dispersions
assert numpy.all(numpy.absolute(el_par['KIN'][:,18,1] -
numpy.array([1000.5, 1000.5, 224.7, 124.9, 171.2, 0.0, 81.2,
50.0])) < 1e-1), \
'H-alpha dispersions are too different'
x,
y,
directory_path=directory_path)
# Fitting functions expect data to be in 2D arrays (for now):
flux = flux.reshape(1, -1)
ferr = numpy.ma.power(ivar, -0.5).reshape(1, -1)
sres = sres.reshape(1, -1)
#-------------------------------------------------------------------
# Fit the stellar continuum
# Mask the 5577 sky line and the emission lines
sc_pixel_mask = SpectralPixelMask(
artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPSCMSK'))
# Construct the template library
sc_tpl = TemplateLibrary(sc_tpl_key,
tpllib_list=tpllib_list,
match_resolution=False,
velscale_ratio=velscale_ratio,
spectral_step=1e-4,
log=True,
hardcopy=False)
sc_tpl_sres = numpy.mean(sc_tpl['SPECRES'].data, axis=0).ravel()
# Instantiate the fitting class
ppxf = PPXFFit(StellarContinuumModelBitMask())
# Perform the fit
def test_read():
dbs = EmissionLineDB.available_databases()
assert len(dbs) > 0, 'No emission-line databases available'
for key in dbs.keys():
emldb = EmissionLineDB.from_key(key)
def test_mpl11():
emldb = EmissionLineDB.from_key('ELPMPL11')
assert len(emldb) == 35, 'Incorrect number of emission lines'
assert 'ArIII' in emldb['name'], 'Does not contain ArIII in list'
def test_ppxffit():
# Read the data
specfile = data_test_file('MaNGA_test_spectra.fits.gz')
hdu = fits.open(specfile)
drpbm = DRPFitsBitMask()
flux = numpy.ma.MaskedArray(hdu['FLUX'].data,
mask=drpbm.flagged(
hdu['MASK'].data,
MaNGADataCube.do_not_fit_flags()))
ferr = numpy.ma.power(hdu['IVAR'].data, -0.5)
flux[ferr.mask] = numpy.ma.masked
ferr[flux.mask] = numpy.ma.masked
nspec = flux.shape[0]
# Instantiate the template libary
velscale_ratio = 4
tpl = TemplateLibrary('MILESHC',
match_resolution=False,
velscale_ratio=velscale_ratio,
spectral_step=1e-4,
log=True,
hardcopy=False)
tpl_sres = numpy.mean(tpl['SPECRES'].data, axis=0)
# Get the pixel mask
pixelmask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPSCMSK'))
# Instantiate the fitting class
ppxf = PPXFFit(StellarContinuumModelBitMask())
# Perform the fit
fit_wave, fit_flux, fit_mask, fit_par \
= ppxf.fit(tpl['WAVE'].data.copy(), tpl['FLUX'].data.copy(), hdu['WAVE'].data, flux, ferr,
hdu['Z'].data, numpy.full(nspec, 100.), iteration_mode='no_global_wrej',
reject_boxcar=100, ensemble=False, velscale_ratio=velscale_ratio,
mask=pixelmask, matched_resolution=False, tpl_sres=tpl_sres,
obj_sres=hdu['SRES'].data, degree=8, moments=2)
# Test the results
# Rejected pixels
assert numpy.sum(ppxf.bitmask.flagged(fit_mask, flag='PPXF_REJECT')) == 119, \
'Different number of rejected pixels'
# Unable to fit
assert numpy.array_equal(ppxf.bitmask.flagged_bits(fit_par['MASK'][5]), ['NO_FIT']), \
'Expected NO_FIT in 6th spectrum'
# Number of used templates
assert numpy.array_equal(numpy.sum(numpy.absolute(fit_par['TPLWGT']) > 1e-10, axis=1),
[12, 13, 17, 15, 15, 0, 8, 12]), \
'Different number of templates with non-zero weights'
# Number of additive coefficients
assert fit_par['ADDCOEF'].shape[
1] == 9, 'Incorrect number of additive coefficients'
# No multiplicative coefficients
assert numpy.all(fit_par['MULTCOEF'] == 0), \
'No multiplicative coefficients should exist'
# Kinematics and errors
assert numpy.all(numpy.absolute(fit_par['KIN'] -
numpy.array([[ 14880.7, 292.9], [ 15053.4, 123.2],
[ 14787.5, 236.4], [ 8291.8, 169.7],
[ 9261.4, 202.7], [ 0.0, 0.0],
[ 5123.5, 63.8], [ 5455.6, 51.8]])) < 0.1), \
'Kinematics are too different'
assert numpy.all(numpy.absolute(fit_par['KINERR'] -
numpy.array([[2.0,1.9], [1.5,1.7], [ 2.4, 2.4], [2.2,2.3],
[1.1,1.1], [0.0,0.0], [26.1,30.8], [4.7,7.5]])) < 0.1), \
'Kinematic errors are too different'
# Velocity dispersion corrections
assert numpy.all(numpy.absolute(fit_par['SIGMACORR_SRES'] -
numpy.array([23.5, 10.1, 27.3, 38.7, 22.3, 0.0, 63.8, 23.8])) < 0.1), \
'SRES corrections are too different'
assert numpy.all(numpy.absolute(fit_par['SIGMACORR_EMP'] -
numpy.array([22.6, 0.0, 26.0, 38.2, 18.0, 0.0, 70.1, 0.0])) < 0.1), \
'EMP corrections are too different'
# Figures of merit
assert numpy.all(numpy.absolute(fit_par['RCHI2'] -
numpy.array([ 1.94, 1.18, 1.40, 1.53, 2.50, 0.00, 1.06, 0.86])) < 0.01), \
'Reduced chi-square too different'
assert numpy.all(
numpy.absolute(fit_par['RMS'] - numpy.array(
[0.033, 0.019, 0.034, 0.023, 0.046, 0.000, 0.015, 0.015])) < 0.001
), 'RMS too different'
assert numpy.all(
numpy.absolute(fit_par['FRMS'] - numpy.array(
[0.018, 0.023, 0.023, 0.032, 0.018, 0.000, 33.577, 0.148])) < 0.001
), 'Fractional RMS too different'
assert numpy.all(
numpy.absolute(fit_par['RMSGRW'][:, 2] - numpy.array(
[0.067, 0.037, 0.068, 0.046, 0.093, 0.000, 0.029, 0.027])) < 0.001
), 'Median absolute residual too different'
processed_file="mileshc.fits",
clobber=True)
# Instantiate the object that does the fitting
contbm = StellarContinuumModelBitMask()
ppxf = PPXFFit(contbm)
abs_db = AbsorptionIndexDB(u"EXTINDX")
band_db = BandheadIndexDB(u"BHBASIC")
global indx_names
indx_names = np.hstack([abs_db.data["name"], band_db.data["name"]])
specm = EmissionLineModelBitMask()
elric = Elric(specm)
global emlines
emlines = EmissionLineDB(u"ELPFULL")
c = con.c.to(un.km / un.s).value
# if os.path.isfile("emission_line_params_log_scale_tq_"+str(len(tqs))+"_tau_"+str(len(taus))+"_to_"+str(len(time_steps))+"_Z_"+str(len(zmets))+"_"+".npy"):
# eml = list(np.load("emission_line_params_log_scale_tq_"+str(len(tqs))+"_tau_"+str(len(taus))+"_to_"+str(len(time_steps))+"_Z_"+str(len(zmets))+"_"+".npy"))
# else:
# eml = []
# if os.path.isfile("abs_index_params_log_scale_tq_"+str(len(tqs))+"_tau_"+str(len(taus))+"_to_"+str(len(time_steps))+"_Z_"+str(len(zmets))+"_"+".npy"):
# idm = list(np.load("abs_index_params_log_scale_tq_"+str(len(tqs))+"_tau_"+str(len(taus))+"_to_"+str(len(time_steps))+"_Z_"+str(len(zmets))+"_"+".npy"))
# else:
# idm = []
manga_wave = np.load("manga_wavelengths_AA.npy")
def test_emldb():
emldb = EmissionLineDB.from_key('ELPMPL11')
assert emldb.size == 35
_emldb = EmissionLineDB(emldb.file)
assert _emldb.size == 35
# same spectral resolution. Otherwise, one cannot freely combine
# the spectra to fit the Doppler broadening of the galaxy spectrum
# in a robust (constrained) way (without substantially more
# effort). There should be no difference between what's done below
# and simply taking the spectral resolution to be that of the first
# template spectrum (i.e., sc_tpl['SPECRES'].data[0])
sc_tpl_sres = numpy.mean(sc_tpl['SPECRES'].data, axis=0).ravel()
# Now we want to construct a pixel mask that excludes regions with
# known artifacts and emission lines. The 'BADSKY' artifact
# database only masks the 5577, which can have strong left-over
# residuals after sky-subtraction. The list of emission lines (set
# by the ELPMPL8 keyword) can be different from the list of
# emission lines fit below.
sc_pixel_mask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPMPL8'))
# Instantiate the fitting class, including the mask that it should
# use to flag the data. [[This mask should just be default...]]
ppxf = PPXFFit(StellarContinuumModelBitMask())
# The following call performs the fit to the spectrum. Specifically
# note that the code only fits the first two moments, uses an
# 8th-order additive polynomial, and uses the 'no_global_wrej'
# iteration mode. See
# https://sdss-mangadap.readthedocs.io/en/latest/api/mangadap.proc.ppxffit.html#mangadap.proc.ppxffit.PPXFFit.fit
cont_wave, cont_flux, cont_mask, cont_par \
= ppxf.fit(sc_tpl['WAVE'].data.copy(), sc_tpl['FLUX'].data.copy(), wave, flux, ferr,
z, dispersion, iteration_mode='no_global_wrej', reject_boxcar=100,
ensemble=False, velscale_ratio=sc_velscale_ratio, mask=sc_pixel_mask,
matched_resolution=False, tpl_sres=sc_tpl_sres, obj_sres=sres, degree=8,
def measure_spec(fluxes, errors=None, ivar=None, sres=None):
""" This function takes an array of spectra of shape (# of spectra, # of wavelengths) and returns the pre-defined emission line and
absorption features in each spectra in two recorded arrays of shape (# of spectra,). The recorded arrays can be accessed to give the
quantities returned by the MaNGA DAP, e.g. ["EW"], ["EWERR"], ["INDX"].
The user can change the emission and absorption quantities returned by specifying different emission line and absorption feature
databases.
INPUTS
:fluxes:
Fluxes at each manga wavelength, M for any number of spectra, X. Shape (X, M).
OUTPUTS
:em_model_eml_par:
Recorded array containing the emisison line parameter measurements from the defined user database. Shape (X, ).
:indx_measurement:
Recorded array containing the absorption feature parameter measurements from the defined user database. Shape (X, ).
"""
if ivar is None:
ivar = 1/(0.1*fluxes)**2
if errors is None:
errors = 0.1*fluxes
if sres is None:
sres = np.ones_like(fluxes)
tpl = TemplateLibrary("MILESHC",
match_to_drp_resolution=False,
velscale_ratio=1,
spectral_step=1e-4,
log=True,
directory_path=".",
processed_file="mileshc.fits",
clobber=True)
# Instantiate the object that does the fitting
contbm = StellarContinuumModelBitMask()
ppxf = PPXFFit(contbm)
# Define the absorption and bandhead feature databases
define_abs_db = SpectralFeatureDBDef(key='USERABS',
file_path='extindxsnitch.par')
abs_db = AbsorptionIndexDB(u"USERABS", indxdb_list=define_abs_db)
band_db = BandheadIndexDB(u"BHBASIC")
global indx_names
indx_names = np.hstack([abs_db.data["name"], band_db.data["name"]])
# Define the emission line feature database
specm = EmissionLineModelBitMask()
elric = Elric(specm)
global emlines
define_em_db = SpectralFeatureDBDef(key='USEREM',
file_path='elpsnitch.par')
emlines = EmissionLineDB(u"USEREM", emldb_list=define_em_db)
# Check to see if a single spectra has been input. If the single spectra is shape (# of wavelengths,) then reshape
# to give (1, #number of wavelengths)
if fluxes.shape[0] == len(manga_wave):
fluxes = fluxes.reshape(1,-1)
else:
pass
nspec = fluxes.shape[0]
# Provide the guess redshift and guess velocity dispersion
guess_redshift = np.full(nspec, 0.0001, dtype=float)
guess_dispersion = np.full(nspec, 77.0, dtype=float)
# Perform the fits to the continuum, emission lines and absorption features
model_wave, model_flux, model_mask, model_par = ppxf.fit(tpl["WAVE"].data.copy(), tpl["FLUX"].data.copy(), manga_wave, fluxes, errors, guess_redshift, guess_dispersion, iteration_mode="none", velscale_ratio=1, degree=8, mdegree=-1, moments=2, quiet=True)
em_model_wave, em_model_flux, em_model_base, em_model_mask, em_model_fit_par, em_model_eml_par = elric.fit(manga_wave, fluxes, emission_lines=emlines, ivar=ivar, sres=sres, continuum=model_flux, guess_redshift = model_par["KIN"][:,0]/c, guess_dispersion=model_par["KIN"][:,1], base_order=1, quiet=True)
indx_measurements = SpectralIndices.measure_indices(absdb=abs_db, bhddb=band_db, wave=manga_wave, flux=fluxes-em_model_flux, ivar=ivar, mask=None, redshift=model_par["KIN"][:,0]/c, bitmask=None)
# Close all plots generated by the MaNGA DAP pipeline
plt.close("all")
plt.cla()
plt.clf()
return em_model_eml_par, indx_measurements
def main():
t = time.perf_counter()
arg = parse_args()
if not os.path.isfile(arg.inp):
raise FileNotFoundError('No file: {0}'.format(arg.inp))
directory_path = os.getcwd(
) if arg.output_root is None else os.path.abspath(arg.output_root)
if not os.path.isdir(directory_path):
os.makedirs(directory_path)
data_file = os.path.abspath(arg.inp)
fit_file = os.path.join(directory_path, arg.out)
flag_db = None if arg.spec_flags is None else os.path.abspath(
arg.spec_flags)
# Read the data
spectral_step = 1e-4
wave, flux, ferr, sres, redshift, fit_spectrum = object_data(
data_file, flag_db)
nspec, npix = flux.shape
dispersion = numpy.full(nspec, 100., dtype=numpy.float)
# fit_spectrum[:] = False
# fit_spectrum[0] = True
# fit_spectrum[171] = True
# fit_spectrum[791] = True
# Mask spectra that should not be fit
indx = numpy.any(numpy.logical_not(numpy.ma.getmaskarray(flux)),
axis=1) & fit_spectrum
flux[numpy.logical_not(indx), :] = numpy.ma.masked
print('Read: {0}'.format(arg.inp))
print('Contains {0} spectra'.format(nspec))
print(' each with {0} pixels'.format(npix))
print('Fitting {0} spectra.'.format(numpy.sum(fit_spectrum)))
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Fit the stellar continuum
# Construct the template library
sc_tpl = TemplateLibrary(arg.sc_tpl,
match_resolution=False,
velscale_ratio=arg.sc_vsr,
spectral_step=spectral_step,
log=True,
hardcopy=False)
# Set the spectral resolution
sc_tpl_sres = numpy.mean(sc_tpl['SPECRES'].data, axis=0).ravel()
# Set the pixel mask
sc_pixel_mask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPMPL8'))
# Instantiate the fitting class
ppxf = PPXFFit(StellarContinuumModelBitMask())
# The following call performs the fit to the spectrum. Specifically
# note that the code only fits the first two moments, uses an
# 8th-order additive polynomial, and uses the 'no_global_wrej'
# iteration mode. See
# https://sdss-mangadap.readthedocs.io/en/latest/api/mangadap.proc.ppxffit.html#mangadap.proc.ppxffit.PPXFFit.fit
cont_wave, cont_flux, cont_mask, cont_par \
= ppxf.fit(sc_tpl['WAVE'].data.copy(), sc_tpl['FLUX'].data.copy(), wave, flux, ferr,
redshift, dispersion, iteration_mode='no_global_wrej', reject_boxcar=100,
ensemble=False, velscale_ratio=arg.sc_vsr, mask=sc_pixel_mask,
matched_resolution=False, tpl_sres=sc_tpl_sres, obj_sres=sres,
degree=arg.sc_deg, moments=2) #, plot=True)
if arg.sc_only:
write(fit_file, wave, cont_flux, cont_mask, cont_par)
print('Elapsed time: {0} seconds'.format(time.perf_counter() - t))
return
# if numpy.any(cont_par['KIN'][:,1] < 0):
# embed()
# exit()
#-------------------------------------------------------------------
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Measure the emission-line moments
# # Remask the continuum fit
# sc_continuum = StellarContinuumModel.reset_continuum_mask_window(
# numpy.ma.MaskedArray(cont_flux, mask=cont_mask>0))
# # Read the database that define the emission lines and passbands
# momdb = EmissionMomentsDB.from_key(arg.el_band)
# # Measure the moments
# elmom = EmissionLineMoments.measure_moments(momdb, wave, flux, continuum=sc_continuum,
# redshift=redshift)
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Fit the emission-line model
# Set the emission-line continuum templates if different from those
# used for the stellar continuum
if arg.sc_tpl == arg.el_tpl:
# If the keywords are the same, just copy over the previous
# library and the best fitting stellar kinematics
el_tpl = sc_tpl
el_tpl_sres = sc_tpl_sres
stellar_kinematics = cont_par['KIN'].copy()
else:
# If the template sets are different, we need to match the
# spectral resolution to the galaxy data and use the corrected
# velocity dispersions.
_sres = SpectralResolution(wave, sres[0, :], log10=True)
el_tpl = TemplateLibrary(arg.el_tpl,
sres=_sres,
velscale_ratio=arg.el_vsr,
spectral_step=spectral_step,
log=True,
hardcopy=False)
el_tpl_sres = numpy.mean(el_tpl['SPECRES'].data, axis=0).ravel()
stellar_kinematics = cont_par['KIN'].copy()
stellar_kinematics[:, 1] = numpy.ma.sqrt(
numpy.square(cont_par['KIN'][:, 1]) -
numpy.square(cont_par['SIGMACORR_SRES'])).filled(0.0)
# if numpy.any(cont_par['KIN'][:,1] < 0):
# embed()
# exit()
#
# if numpy.any(stellar_kinematics[:,1] < 0):
# embed()
# exit()
# Mask the 5577 sky line
el_pixel_mask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'))
# Read the emission line fitting database
emldb = EmissionLineDB.from_key(arg.el_list)
# Instantiate the fitting class
emlfit = Sasuke(EmissionLineModelBitMask())
# TODO: Improve the initial velocity guess using the first moment...
# Perform the fit
elfit_time = time.perf_counter()
model_wave, model_flux, eml_flux, model_mask, eml_fit_par, eml_eml_par \
= emlfit.fit(emldb, wave, flux, obj_ferr=ferr, obj_mask=el_pixel_mask, obj_sres=sres,
guess_redshift=redshift, guess_dispersion=dispersion, reject_boxcar=101,
stpl_wave=el_tpl['WAVE'].data, stpl_flux=el_tpl['FLUX'].data,
stpl_sres=el_tpl_sres, stellar_kinematics=stellar_kinematics,
etpl_sinst_mode='offset', etpl_sinst_min=10., velscale_ratio=arg.el_vsr,
matched_resolution=False, mdegree=arg.el_deg, ensemble=False)#, plot=True)
print('EML FIT TIME: ', time.perf_counter() - elfit_time)
# Line-fit metrics (should this be done in the fit method?)
eml_eml_par = EmissionLineFit.line_metrics(emldb,
wave,
flux,
ferr,
model_flux,
eml_eml_par,
model_mask=model_mask,
bitmask=emlfit.bitmask)
# Equivalent widths
EmissionLineFit.measure_equivalent_width(wave,
flux,
emldb,
eml_eml_par,
bitmask=emlfit.bitmask,
checkdb=False)
# Measure the emission-line moments
# - Model continuum
continuum = StellarContinuumModel.reset_continuum_mask_window(model_flux -
eml_flux)
# - Updated redshifts
fit_redshift = eml_eml_par['KIN'][:,numpy.where(emldb['name'] == 'Ha')[0][0],0] \
/ astropy.constants.c.to('km/s').value
# - Set the moment database
momdb = EmissionMomentsDB.from_key(arg.el_band)
# - Set the moment bitmask
mombm = EmissionLineMomentsBitMask()
# - Measure the moments
elmom = EmissionLineMoments.measure_moments(momdb,
wave,
flux,
ivar=numpy.ma.power(ferr, -2),
continuum=continuum,
redshift=fit_redshift,
bitmask=mombm)
# - Select the bands that are valid
include_band = numpy.array([numpy.logical_not(momdb.dummy)]*nspec) \
& numpy.logical_not(mombm.flagged(elmom['MASK'],
flag=['BLUE_EMPTY', 'RED_EMPTY']))
# - Set the line center at the center of the primary passband
line_center = (1.0 + fit_redshift)[:, None] * momdb['restwave'][None, :]
elmom['BMED'], elmom['RMED'], pos, elmom['EWCONT'], elmom['EW'], elmom['EWERR'] \
= emission_line_equivalent_width(wave, flux, momdb['blueside'], momdb['redside'],
line_center, elmom['FLUX'], redshift=fit_redshift,
line_flux_err=elmom['FLUXERR'],
include_band=include_band)
# - Flag non-positive measurements
indx = include_band & numpy.logical_not(pos)
elmom['MASK'][indx] = mombm.turn_on(elmom['MASK'][indx],
'NON_POSITIVE_CONTINUUM')
# - Set the binids
elmom['BINID'] = numpy.arange(nspec)
elmom['BINID_INDEX'] = numpy.arange(nspec)
write(fit_file,
wave,
cont_flux,
cont_mask,
cont_par,
model_flux=model_flux,
model_mask=model_mask,
eml_flux=eml_flux,
eml_fit_par=eml_fit_par,
eml_eml_par=eml_eml_par,
elmom=elmom)
print('Elapsed time: {0} seconds'.format(time.perf_counter() - t))
def main():
t = time.perf_counter()
#-------------------------------------------------------------------
# Read spectra to fit. The following reads a single MaNGA spectrum.
# This is where you should read in your own spectrum to fit.
# Plate-IFU to use
plt = 7815
ifu = 3702
# Spaxel coordinates
x = 25 #30
y = 25 #37
# Where to find the relevant datacube. This example accesses the test data
# that can be downloaded by executing the script here:
# https://github.com/sdss/mangadap/blob/master/download_test_data.py
directory_path = defaults.dap_source_dir() / 'data' / 'remote'
# Read a spectrum
wave, flux, ivar, sres = get_spectra(plt, ifu, x, y, directory_path=directory_path)
# In general, the DAP fitting functions expect data to be in 2D
# arrays with shape (N-spectra,N-wave). So if you only have one
# spectrum, you need to expand the dimensions:
flux = flux.reshape(1,-1)
ivar = ivar.reshape(1,-1)
ferr = numpy.ma.power(ivar, -0.5)
sres = sres.reshape(1,-1)
# The majority (if not all) of the DAP methods expect that your
# spectra are binned logarithmically in wavelength (primarily
# because this is what pPXF expects). You can either have the DAP
# function determine this value (commented line below) or set it
# directly. The value is used to resample the template spectra to
# match the sampling of the spectra to fit (up to some integer; see
# velscale_ratio).
# spectral_step = spectral_coordinate_step(wave, log=True)
spectral_step = 1e-4
# Hereafter, the methods expect a wavelength vector, a flux array
# with the spectra to fit, an ferr array with the 1-sigma errors in
# the flux, and sres with the wavelength-dependent spectral
# resolution, R = lambda / Dlambda
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# The DAP needs a reasonable guess of the redshift of the spectrum
# (within +/- 2000 km/s). In this example, I'm pulling the redshift
# from the DRPall file. There must be one redshift estimate per
# spectrum to fit. Here that means it's a single element array
# This example accesses the test data
# that can be downloaded by executing the script here:
# https://github.com/sdss/mangadap/blob/master/download_test_data.py
drpall_file = directory_path / f'drpall-{drp_test_version}.fits'
z = numpy.array([get_redshift(plt, ifu, drpall_file)])
print('Redshift: {0}'.format(z[0]))
# The DAP also requires an initial guess for the velocity
# dispersion. A guess of 100 km/s is usually robust, but this may
# depend on your spectral resolution.
dispersion = numpy.array([100.])
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# The following sets the keyword for the template spectra to use
# during the fit. You can specify different template sets to use
# during the stellar-continuum (stellar kinematics) fit and the
# emission-line modeling.
# Templates used in the stellar continuum fits
sc_tpl_key = 'MILESHC'
# Templates used in the emission-line modeling
el_tpl_key = 'MASTARSSP'
# You also need to specify the sampling for the template spectra.
# The templates must be sampled with the same pixel step as the
# spectra to be fit, up to an integer factor. The critical thing
# for the sampling is that you do not want to undersample the
# spectral resolution element of the template spectra. Here, I set
# the sampling for the MILES templates to be a factor of 4 smaller
# than the MaNGA spectrum to be fit (which is a bit of overkill
# given the resolution difference). I set the sampling of the
# MaStar templates to be the same as the galaxy data.
# Template pixel scale a factor of 4 smaller than galaxy data
sc_velscale_ratio = 4
# Template sampling is the same as the galaxy data
el_velscale_ratio = 1
# You then need to identify the database that defines the
# emission-line passbands (elmom_key) for the non-parametric
# emission-line moment calculations, and the emission-line
# parameters (elfit_key) for the Gaussian emission-line modeling.
# See
# https://sdss-mangadap.readthedocs.io/en/latest/emissionlines.html.
elmom_key = 'ELBMPL9'
elfit_key = 'ELPMPL11'
# If you want to also calculate the spectral indices, you can
# provide a keyword that indicates the database with the passband
# definitions for both the absorption-line and bandhead/color
# indices to measure. The script allows these to be None, if you
# don't want to calculate the spectral indices. See
# https://sdss-mangadap.readthedocs.io/en/latest/spectralindices.html
absindx_key = 'EXTINDX'
bhdindx_key = 'BHBASIC'
# Now we want to construct a pixel mask that excludes regions with
# known artifacts and emission lines. The 'BADSKY' artifact
# database only masks the 5577, which can have strong left-over
# residuals after sky-subtraction. The list of emission lines (set
# by the ELPMPL8 keyword) can be different from the list of
# emission lines fit below.
sc_pixel_mask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPMPL11'))
# Mask the 5577 sky line
el_pixel_mask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'))
# Finally, you can set whether or not to show a set of plots.
#
# Show the ppxf-generated plots for each fit stage.
fit_plots = False
# Show summary plots
usr_plots = True
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Fit the stellar continuum
# First, we construct the template library. The keyword that
# selects the template library (sc_tpl_key) is defined above. The
# following call reads in the template library and processes the
# data to have the appropriate pixel sampling. Note that *no*
# matching of the spectral resolution to the galaxy spectrum is
# performed.
sc_tpl = TemplateLibrary(sc_tpl_key, match_resolution=False, velscale_ratio=sc_velscale_ratio,
spectral_step=spectral_step, log=True, hardcopy=False)
# This calculation of the mean spectral resolution is a kludge. The
# template library should provide spectra that are *all* at the
# same spectral resolution. Otherwise, one cannot freely combine
# the spectra to fit the Doppler broadening of the galaxy spectrum
# in a robust (constrained) way (without substantially more
# effort). There should be no difference between what's done below
# and simply taking the spectral resolution to be that of the first
# template spectrum (i.e., sc_tpl['SPECRES'].data[0])
sc_tpl_sres = numpy.mean(sc_tpl['SPECRES'].data, axis=0).ravel()
# Instantiate the fitting class, including the mask that it should
# use to flag the data. [[This mask should just be default...]]
ppxf = PPXFFit(StellarContinuumModelBitMask())
# The following call performs the fit to the spectrum. Specifically
# note that the code only fits the first two moments, uses an
# 8th-order additive polynomial, and uses the 'no_global_wrej'
# iteration mode. See
# https://sdss-mangadap.readthedocs.io/en/latest/api/mangadap.proc.ppxffit.html#mangadap.proc.ppxffit.PPXFFit.fit
cont_wave, cont_flux, cont_mask, cont_par \
= ppxf.fit(sc_tpl['WAVE'].data.copy(), sc_tpl['FLUX'].data.copy(), wave, flux, ferr,
z, dispersion, iteration_mode='no_global_wrej', reject_boxcar=100,
ensemble=False, velscale_ratio=sc_velscale_ratio, mask=sc_pixel_mask,
matched_resolution=False, tpl_sres=sc_tpl_sres, obj_sres=sres, degree=8,
moments=2, plot=fit_plots)
# The returned objects from the fit are the wavelength, model, and
# mask vectors and the record array with the best-fitting model
# parameters. The datamodel of the best-fitting model parameters is
# set by:
# https://sdss-mangadap.readthedocs.io/en/latest/api/mangadap.proc.spectralfitting.html#mangadap.proc.spectralfitting.StellarKinematicsFit._per_stellar_kinematics_dtype
# Remask the continuum fit
sc_continuum = StellarContinuumModel.reset_continuum_mask_window(
numpy.ma.MaskedArray(cont_flux, mask=cont_mask>0))
# Show the fit and residual
if usr_plots:
pyplot.plot(wave, flux[0,:], label='Data')
pyplot.plot(wave, sc_continuum[0,:], label='Model')
pyplot.plot(wave, flux[0,:] - sc_continuum[0,:], label='Resid')
pyplot.legend()
pyplot.xlabel('Wavelength')
pyplot.ylabel('Flux')
pyplot.show()
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Get the emission-line moments using the fitted stellar continuum
# Read the database that define the emission lines and passbands
momdb = EmissionMomentsDB.from_key(elmom_key)
# Measure the moments
elmom = EmissionLineMoments.measure_moments(momdb, wave, flux, continuum=sc_continuum,
redshift=z)
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Fit the emission-line model
# Set the emission-line continuum templates if different from those
# used for the stellar continuum
if sc_tpl_key == el_tpl_key:
# If the keywords are the same, just copy over the previous
# library ...
el_tpl = sc_tpl
el_tpl_sres = sc_tpl_sres
# ... and the best fitting stellar kinematics
stellar_kinematics = cont_par['KIN']
else:
# If the template sets are different, we need to match the
# spectral resolution to the galaxy data ...
_sres = SpectralResolution(wave, sres[0,:], log10=True)
el_tpl = TemplateLibrary(el_tpl_key, sres=_sres, velscale_ratio=el_velscale_ratio,
spectral_step=spectral_step, log=True, hardcopy=False)
el_tpl_sres = numpy.mean(el_tpl['SPECRES'].data, axis=0).ravel()
# ... and use the corrected velocity dispersions.
stellar_kinematics = cont_par['KIN']
stellar_kinematics[:,1] = numpy.ma.sqrt(numpy.square(cont_par['KIN'][:,1]) -
numpy.square(cont_par['SIGMACORR_EMP']))
# Read the emission line fitting database
emldb = EmissionLineDB.from_key(elfit_key)
# Instantiate the fitting class
emlfit = Sasuke(EmissionLineModelBitMask())
# Perform the fit
efit_t = time.perf_counter()
eml_wave, model_flux, eml_flux, eml_mask, eml_fit_par, eml_eml_par \
= emlfit.fit(emldb, wave, flux, obj_ferr=ferr, obj_mask=el_pixel_mask, obj_sres=sres,
guess_redshift=z, guess_dispersion=dispersion, reject_boxcar=101,
stpl_wave=el_tpl['WAVE'].data, stpl_flux=el_tpl['FLUX'].data,
stpl_sres=el_tpl_sres, stellar_kinematics=stellar_kinematics,
etpl_sinst_mode='offset', etpl_sinst_min=10.,
velscale_ratio=el_velscale_ratio, matched_resolution=False, mdegree=8,
plot=fit_plots)
print('TIME: ', time.perf_counter() - efit_t)
# Line-fit metrics
eml_eml_par = EmissionLineFit.line_metrics(emldb, wave, flux, ferr, model_flux, eml_eml_par,
model_mask=eml_mask, bitmask=emlfit.bitmask)
# Get the stellar continuum that was fit for the emission lines
elcmask = eml_mask.ravel() > 0
goodpix = numpy.arange(elcmask.size)[numpy.invert(elcmask)]
start, end = goodpix[0], goodpix[-1]+1
elcmask[start:end] = False
el_continuum = numpy.ma.MaskedArray(model_flux - eml_flux,
mask=elcmask.reshape(model_flux.shape))
# Plot the result
if usr_plots:
pyplot.plot(wave, flux[0,:], label='Data')
pyplot.plot(wave, model_flux[0,:], label='Model')
pyplot.plot(wave, el_continuum[0,:], label='EL Cont.')
pyplot.plot(wave, sc_continuum[0,:], label='SC Cont.')
pyplot.legend()
pyplot.xlabel('Wavelength')
pyplot.ylabel('Flux')
pyplot.show()
# Remeasure the emission-line moments with the new continuum
new_elmom = EmissionLineMoments.measure_moments(momdb, wave, flux, continuum=el_continuum,
redshift=z)
# Compare the summed flux and Gaussian-fitted flux for all the
# fitted lines
if usr_plots:
pyplot.scatter(emldb['restwave'], (new_elmom['FLUX']-eml_eml_par['FLUX']).ravel(),
c=eml_eml_par['FLUX'].ravel(), cmap='viridis', marker='.', s=60, lw=0,
zorder=4)
pyplot.grid()
pyplot.xlabel('Wavelength')
pyplot.ylabel('Summed-Gaussian Difference')
pyplot.show()
#-------------------------------------------------------------------
#-------------------------------------------------------------------
# Measure the spectral indices
if absindx_key is None or bhdindx_key is None:
# Neither are defined, so we're done
print('Elapsed time: {0} seconds'.format(time.perf_counter() - t))
return
# Setup the databases that define the indices to measure
absdb = None if absindx_key is None else AbsorptionIndexDB.from_key(absindx_key)
bhddb = None if bhdindx_key is None else BandheadIndexDB.from_key(bhdindx_key)
# Remove the modeled emission lines from the spectra
flux_noeml = flux - eml_flux
redshift = stellar_kinematics[:,0] / astropy.constants.c.to('km/s').value
sp_indices = SpectralIndices.measure_indices(absdb, bhddb, wave, flux_noeml, ivar=ivar,
redshift=redshift)
# Calculate the velocity dispersion corrections
# - Construct versions of the best-fitting model spectra with and without
# the included dispersion
continuum = Sasuke.construct_continuum_models(emldb, el_tpl['WAVE'].data, el_tpl['FLUX'].data,
wave, flux.shape, eml_fit_par)
continuum_dcnvlv = Sasuke.construct_continuum_models(emldb, el_tpl['WAVE'].data,
el_tpl['FLUX'].data, wave, flux.shape,
eml_fit_par, redshift_only=True)
# - Get the dispersion corrections and fill the relevant columns of the
# index table
sp_indices['BCONT_MOD'], sp_indices['BCONT_CORR'], sp_indices['RCONT_MOD'], \
sp_indices['RCONT_CORR'], sp_indices['MCONT_MOD'], sp_indices['MCONT_CORR'], \
sp_indices['AWGT_MOD'], sp_indices['AWGT_CORR'], \
sp_indices['INDX_MOD'], sp_indices['INDX_CORR'], \
sp_indices['INDX_BF_MOD'], sp_indices['INDX_BF_CORR'], \
good_les, good_ang, good_mag, is_abs \
= SpectralIndices.calculate_dispersion_corrections(absdb, bhddb, wave, flux,
continuum, continuum_dcnvlv,
redshift=redshift,
redshift_dcnvlv=redshift)
# Apply the index corrections. This is only done here for the
# Worthey/Trager definition of the indices, as an example
corrected_indices = numpy.zeros(sp_indices['INDX'].shape, dtype=float)
corrected_indices_err = numpy.zeros(sp_indices['INDX'].shape, dtype=float)
# Unitless indices
corrected_indices[good_les], corrected_indices_err[good_les] \
= SpectralIndices.apply_dispersion_corrections(sp_indices['INDX'][good_les],
sp_indices['INDX_CORR'][good_les],
err=sp_indices['INDX_ERR'][good_les])
# Indices in angstroms
corrected_indices[good_ang], corrected_indices_err[good_ang] \
= SpectralIndices.apply_dispersion_corrections(sp_indices['INDX'][good_ang],
sp_indices['INDX_CORR'][good_ang],
err=sp_indices['INDX_ERR'][good_ang],
unit='ang')
# Indices in magnitudes
corrected_indices[good_mag], corrected_indices_err[good_mag] \
= SpectralIndices.apply_dispersion_corrections(sp_indices['INDX'][good_mag],
sp_indices['INDX_CORR'][good_mag],
err=sp_indices['INDX_ERR'][good_mag],
unit='mag')
# Print the results for a few indices
index_names = numpy.append(absdb['name'], bhddb['name'])
print('-'*73)
print(f'{"NAME":<8} {"Raw Index":>12} {"err":>12} {"Index Corr":>12} {"Index":>12} {"err":>12}')
print(f'{"-"*8:<8} {"-"*12:<12} {"-"*12:<12} {"-"*12:<12} {"-"*12:<12} {"-"*12:<12}')
for name in ['Hb', 'HDeltaA', 'Mgb', 'Dn4000']:
i = numpy.where(index_names == name)[0][0]
print(f'{name:<8} {sp_indices["INDX"][0,i]:12.4f} {sp_indices["INDX_ERR"][0,i]:12.4f} '
f'{sp_indices["INDX_CORR"][0,i]:12.4f} {corrected_indices[0,i]:12.4f} '
f'{corrected_indices_err[0,i]:12.4f}')
print('-'*73)
embed()
print('Elapsed time: {0} seconds'.format(time.perf_counter() - t))
import resource
soft, hard = resource.getrlimit(resource.RLIMIT_NOFILE)
resource.setrlimit(resource.RLIMIT_NOFILE, (10000, hard))
nwalkers = 100 # number of monte carlo chains
nsteps= 100 # number of steps in the monte carlo chain
opstart = [0.7, 9.0, 1.25] # starting place of all the chains
burnin = 500 # number of steps in the burn in phase of the monte carlo chain
ndim = 3
ages = Planck15.age(mpl6agn['nsa_z']).value
define_em_db = SpectralFeatureDBDef(key='USEREM',
file_path='elpsnitch.par')
emlines = EmissionLineDB(u"USEREM", emldb_list=define_em_db)
define_abs_db = SpectralFeatureDBDef(key='USERABS',
file_path='extindxsnitch.par')
abs_db = AbsorptionIndexDB(u"USERABS", indxdb_list=define_abs_db)
band_db = BandheadIndexDB(u"BHBASIC")
indx_names = np.hstack([abs_db.data["name"], band_db.data["name"]])
for n in trange(len(mpl6agn)):
if os.path.isfile('../data/manga-'+str(mpl6agn[n]['plate'])+'-'+str(mpl6agn[n]['ifudsgn'].strip())+'-LOGCUBE.fits.gz'):
# pass
# else:
# r = requests.get(top_level_url+str(mpl6agn[n]['plate'])+'/stack/manga-'+str(mpl6agn[n]['plate'])+'-'+str(mpl6agn[n]['ifudsgn'].strip())+'-LOGCUBE.fits.gz', auth=HTTPBasicAuth(up[0].rstrip('\n'), up[1].rstrip('\n')), stream=True)
# if r.ok:
# with open('../data/manga-'+str(mpl6agn[n]['plate'])+'-'+str(mpl6agn[n]['ifudsgn'].strip())+'-LOGCUBE.fits.gz', 'wb') as file:
# file.write(r.content)
# s = requests.get(top_level_url+str(mpl6agn[n]['plate'])+'/stack/manga-'+str(mpl6agn[n]['plate'])+'-'+str(mpl6agn[n]['ifudsgn'].strip())+'-LOGRSS.fits.gz', auth=HTTPBasicAuth(up[0].rstrip('\n'), up[1].rstrip('\n')), stream=True)
def test_moments_with_continuum():
# Read the data
specfile = data_test_file('MaNGA_test_spectra.fits.gz')
hdu = fits.open(specfile)
drpbm = DRPFitsBitMask()
flux = numpy.ma.MaskedArray(hdu['FLUX'].data,
mask=drpbm.flagged(
hdu['MASK'].data,
MaNGADataCube.do_not_fit_flags()))
ferr = numpy.ma.power(hdu['IVAR'].data, -0.5)
flux[ferr.mask] = numpy.ma.masked
ferr[flux.mask] = numpy.ma.masked
nspec = flux.shape[0]
# Instantiate the template libary
velscale_ratio = 4
tpl = TemplateLibrary('MILESHC',
match_resolution=False,
velscale_ratio=velscale_ratio,
spectral_step=1e-4,
log=True,
hardcopy=False)
tpl_sres = numpy.mean(tpl['SPECRES'].data, axis=0)
# Get the pixel mask
pixelmask = SpectralPixelMask(artdb=ArtifactDB.from_key('BADSKY'),
emldb=EmissionLineDB.from_key('ELPSCMSK'))
# Instantiate the fitting class
ppxf = PPXFFit(StellarContinuumModelBitMask())
# Perform the fit
fit_wave, fit_flux, fit_mask, fit_par \
= ppxf.fit(tpl['WAVE'].data.copy(), tpl['FLUX'].data.copy(), hdu['WAVE'].data, flux, ferr,
hdu['Z'].data, numpy.full(nspec, 100.), iteration_mode='no_global_wrej',
reject_boxcar=100, ensemble=False, velscale_ratio=velscale_ratio,
mask=pixelmask, matched_resolution=False, tpl_sres=tpl_sres,
obj_sres=hdu['SRES'].data, degree=8, moments=2)
# Remask the continuum fit
sc_continuum = StellarContinuumModel.reset_continuum_mask_window(
numpy.ma.MaskedArray(fit_flux, mask=fit_mask > 0))
# Read the database that define the emission lines and passbands
momdb = EmissionMomentsDB.from_key('ELBMILES')
# Measure the moments
elmombm = EmissionLineMomentsBitMask()
elmom = EmissionLineMoments.measure_moments(momdb,
hdu['WAVE'].data,
flux,
continuum=sc_continuum,
redshift=hdu['Z'].data,
bitmask=elmombm)
# Measure the EW based on the moments
include_band = numpy.array([numpy.invert(momdb.dummy)]*nspec) \
& numpy.invert(elmombm.flagged(elmom['MASK'],
flag=['BLUE_EMPTY', 'RED_EMPTY']))
line_center = (1.0 + hdu['Z'].data)[:, None] * momdb['restwave'][None, :]
elmom['BMED'], elmom['RMED'], pos, elmom['EWCONT'], elmom['EW'], elmom['EWERR'] \
= emission_line_equivalent_width(hdu['WAVE'].data, flux, momdb['blueside'],
momdb['redside'], line_center, elmom['FLUX'],
redshift=hdu['Z'].data,
line_flux_err=elmom['FLUXERR'],
include_band=include_band)
# Check the flags
reference = {
'BLUE_INCOMP': 21,
'MAIN_JUMP': 0,
'UNDEFINED_MOM2': 42,
'JUMP_BTWN_SIDEBANDS': 0,
'RED_JUMP': 0,
'DIVBYZERO': 0,
'NO_ABSORPTION_CORRECTION': 0,
'RED_EMPTY': 21,
'UNDEFINED_BANDS': 8,
'DIDNOTUSE': 0,
'UNDEFINED_MOM1': 0,
'FORESTAR': 0,
'NON_POSITIVE_CONTINUUM': 0,
'LOW_SNR': 0,
'MAIN_EMPTY': 21,
'BLUE_JUMP': 0,
'RED_INCOMP': 21,
'MAIN_INCOMP': 21,
'BLUE_EMPTY': 21
}
assert numpy.all([
reference[k] == numpy.sum(elmombm.flagged(elmom['MASK'], flag=k))
for k in elmombm.keys()
]), 'Number of flagged measurements changed'
# Check that the values are finite
assert numpy.all([ numpy.all(numpy.isfinite(elmom[n])) for n in elmom.dtype.names]), \
'Found non-finite values in output'
# Check the band definitions
assert numpy.all(numpy.equal(elmom['REDSHIFT'],
hdu['Z'].data)), 'Redshift changed'
assert numpy.all(numpy.isclose(numpy.mean(momdb['blueside'], axis=1)[None,:],
elmom['BCEN']/(1+hdu['Z'].data[:,None]))
| elmombm.flagged(elmom['MASK'], flag='UNDEFINED_BANDS')), \
'Blue passband center incorrect'
assert numpy.all(numpy.isclose(numpy.mean(momdb['redside'], axis=1)[None,:],
elmom['RCEN']/(1+hdu['Z'].data[:,None]))
| elmombm.flagged(elmom['MASK'], flag='UNDEFINED_BANDS')), \
'Red passband center incorrect'
# Check the values
assert numpy.all(
numpy.absolute(elmom['FLUX'][0] - numpy.array([
0.63, 0.00, 0.22, -1.32, -0.88, -0.68, -0.44, -0.13, -1.14, -0.07,
-0.11, 0.01, 0.38, 0.73, 0.71, 0.44, 0.08, 0.74, 1.30, 2.34, 0.55,
0.44
])) < 0.01), 'Fluxes too different'
assert numpy.all(numpy.absolute(elmom['MOM1'][0] -
numpy.array([ 14682.6, 0.0, 14843.2, 14865.8, 14890.4, 14404.7,
14208.6, 12376.0, 14662.5, 14148.5, 15804.1, 17948.4,
14874.5, 14774.9, 14840.5, 14746.0, 15093.1, 14857.8,
14839.0, 14840.2, 14876.0, 14859.5])) < 0.1), \
'1st moments too different'
assert numpy.all(numpy.absolute(elmom['MOM2'][0] -
numpy.array([322.2, 0.0, 591.4, 436.4, 474.6, 0.0, 0.0, 0.0,
364.6, 0.0, 0.0, 0.0, 289.1, 226.9, 282.6, 283.8,
227.0, 207.7, 207.7, 253.6, 197.0, 212.4])) < 0.1), \
'2nd moments too different'
assert numpy.all(numpy.absolute(elmom['EW'][0] -
numpy.array([ 0.63, 0.00, 0.20, -1.28, -0.76, -0.54, -0.30, -0.09,
-0.61, -0.03, -0.04, 0.00, 0.13, 0.25, 0.24, 0.13,
0.02, 0.22, 0.38, 0.69, 0.17, 0.13])) < 0.01), \
'EW too different'
def test_eml_channel_names():
emldb = EmissionLineDB.from_key('ELPMPL11')
names = emldb.channel_names()
assert 'Ha-6564' in list(names.keys())
assert names['OII-3727'] == 0
