#time.sleep(6)
VSE.Init_K96() #Change Channel
VSE.Set_DisplayUpdate("ON") #Display On
VSE.Set_SweepCont(0) #Continuous Sweep Off
VSE.Set_IQ_SamplingRate(Fs) #Sampling Rate
VSE.Set_File_InputIQW(Fs, IQFile) #VSE Input File
VSE.Set_K96_File_Config(OFDMCfg) #K96 Demod File
VSE.Set_K96_BurstSearch("OFF") #Burst Search off
VSE.Set_K96_OFDMSymbols(14)
FSW.jav_Reset()
FSW.Init_IQ() #FSW IQ Channel
FSW.Set_IQ_SamplingRate(Fs)
FSW.Set_SweepTime(MeasTim)
SMW.Set_RFState("ON")
##########################################################
### Make Measurement
##########################################################
for Freq in FreqArry:
### Set Frequency
SMW.Set_Freq(Freq)
FSW.Set_Freq(Freq + 50e6)
VSE.Set_Freq(0)
for Pwr in PwrArry:
### Set Power
SMW.Set_RFPwr(Pwr)
#FSW.Set_Autolevel_IFOvld() #Maximize Dynamic Range
### Code Start
##########################################################
from rssd.SMW_Common import VSG
from rssd.FileIO import FileIO
import time
f = FileIO()
DataFile = f.Init(OutFile)
SMW = VSG()
SMW.jav_Open(SMW_IP, f.sFName)
##########################################################
### Instrument Settings
##########################################################
SMW.Set_RFPwr(SWM_Out) #Output Power
SMW.Set_RFState('ON') #Turn RF Output on
f.write(SMW.query('FREQ:MULT:EXT:TYPE?')) #SMZ #
f.write(SMW.query('FREQ:MULT:EXT:SNUM?')) #Serial Num
f.write(SMW.query('FREQ:MULT:EXT:LOAD:VERS?'))
f.write(SMW.query('FREQ:MULT:EXT:FMAX?'))
f.write(SMW.query('FREQ:MULT:EXT:FMIN?'))
f.write(SMW.query('FREQ:MULT:EXT:REV?')) #Revision
f.write("Power")
f.write(SMW.query('FREQ:MULT:EXT:PMAX?')) #Revision
f.write(SMW.query('FREQ:MULT:EXT:PMIN?')) #Revision
f.write(SMW.query('FREQ:MULT:EXT:STAT?'))
SMW.write("MMEM:CDIR '/smz/firmware/'")
f.write(SMW.query("FREQ:MULT:EXT:FIRM:CAT?"))
f.write(SMW.query("FREQ:MULT:EXT:CORR:POW:POIN?"))
##########################################################
### Code Start
##########################################################
SMW = VSG().jav_Open(SMW_IP, OFile)
FSWP = PNA().jav_Open(FSWP_IP, OFile)
##########################################################
### Measure Time
##########################################################
Header = 'Iter,SetFreq,SMFPwr,FSWPFreq,FSWPPwr,LockStatus'
OFile.write(Header)
FSWP.Set_SweepCont(0)
SMW.Set_RFPwr(-50)
SMW.Set_RFState(1)
for i in range(numMeas): #Loop: Measurements
for freq in FreqArry: #Loop: Frequency
SMW.Set_Freq(freq)
# FSWP.Set_Freq(freq)
for pwr in pwrArry: #Loop: Power
SMW.Set_RFPwr(pwr)
FSWP.Set_InitImm()
SMW.delay(2)
lock = FSWP.Get_FreqLock()
ffrq = FSWP.Get_Freq()
fpwr = FSWP.Get_Power()
OutStr = f'{i},{freq},{pwr},{ffrq},{fpwr},{lock}'
OFile.write(OutStr)
##########################################################
sDate = time.strftime("%y%m%d-%H%M%S")
OFile.write('DemodBW,Phase,Mkr1,Mkr2,Mkr3,Mkr4,Meas,MeasAvg\n')
FSW.write('SYST:DISP:UPD ON')
#*********************************
#*** SMW-Setup
#*********************************
SMW.Set_Freq(28e9)
SMW.Set_BBState(0) #Arb Off
SMW.Set_IQMod(0) #IQ Mod Off
SMW.write(':SOUR1:ROSC:SOUR EXT') #ExtReference
SMW.write(':SOUR1:ROSC:EXT:FREQ 10MHZ')
SMW.write(':SOUR1:ROSC:EXT:SBAN WIDE'
) #SMW WIDE(Vary less)|NARR(varys more) bandwidth
SMW.Set_RFState('ON')
#*********************************
#*** FSW-Analog Demodulation
#*********************************
FSW.Set_Channel('ADEM')
FSW.write('LAY:REPL:WIND "1","XTIM:PM"') #PM Demod window
FSW.Set_SweepCont('OFF') #Single sweep
FSW.write('ROSC:SOUR INT') #Reference
FSW.Set_Freq(28e9) #RF Freq
FSW.Set_SweepTime(SwpTim / 1000) #Sweep Time
FSW.write('SENS:BWID:DEM %fKHZ' % DemodBW) #Demod BW MMM
FSW.write('SENS:ADEM:AF:COUP DC') #Coupling MMM
FSW.write('UNIT:ANGL DEG') #Units
FSW.write('DISP:TRAC1:Y:PDIV 4') #Y Scaling
FSW.Set_Trace_AvgCount(1) #Average
##########################################################
### Rohde & Schwarz Automation for demonstration use.
### Purpose: VSG List Mode
### Author: mclim
### Date: 2019.06.13
##########################################################
### User Entry
##########################################################
host = '192.168.1.114' #Get local machine name
##########################################################
### Code Start
##########################################################
from rssd.SMW_Common import VSG
SMW = VSG().jav_Open(host)
#SMW.jav_logSCPI() # Log SCPI commands
SMW.Set_Freq(10e9) # Set 10GHz
SMW.Set_RFPwr(-30) # Output -30dBm
SMW.Set_ListMode_File('list1.lsw') # Select List File
SMW.Set_ListMode_TrigSource('SING') # Single run
SMW.Set_ListMode_RMode('LIVE')
SMW.Set_ListMode_Dwell(1) # Dwell time
SMW.Set_RFState(1) # RF Output on.
SMW.Set_ListMode('LIST') # Turn on listmode
SMW.Set_ListMode_TrigExecute() # Execute single trigger
SMW.Set_ListMode_TrigWait() # Wait for single trigger
SMW.Set_RFState('OFF') # RF Output off
SMW.jav_ClrErr() # Clear Errors
