def appResNorm(sigmaHalf):
nFreq = 26
m1d = Mesh.TensorMesh([[(100,5,1.5),(100.,10),(100,5,1.5)]], x0=['C'])
sigma = np.zeros(m1d.nC) + sigmaHalf
sigma[m1d.gridCC[:]>200] = 1e-8
# Calculate the analytic fields
freqs = np.logspace(4,-4,nFreq)
Z = []
for freq in freqs:
Ed, Eu, Hd, Hu = NSEM.Utils.getEHfields(m1d,sigma,freq,np.array([200]))
Z.append((Ed + Eu)/(Hd + Hu))
Zarr = np.concatenate(Z)
app_r, app_p = NSEM.Utils.appResPhs(freqs,Zarr)
return np.linalg.norm(np.abs(app_r - np.ones(nFreq)/sigmaHalf)) / np.log10(sigmaHalf)
def plot_pseudoSection(DCsurvey, axs, stype='dpdp', dtype="appc", clim=None):
"""
Read list of 2D tx-rx location and plot a speudo-section of apparent
resistivity.
Assumes flat topo for now...
Input:
:param d2D, z0
:switch stype -> Either 'pdp' (pole-dipole) | 'dpdp' (dipole-dipole)
:switch dtype=-> Either 'appr' (app. res) | 'appc' (app. con) | 'volt' (potential)
Output:
:figure scatter plot overlayed on image
Edited Feb 17th, 2016
@author: dominiquef
"""
from SimPEG import np
from scipy.interpolate import griddata
import pylab as plt
# Set depth to 0 for now
z0 = 0.
# Pre-allocate
midx = []
midz = []
rho = []
LEG = []
count = 0 # Counter for data
for ii in range(DCsurvey.nSrc):
Tx = DCsurvey.srcList[ii].loc
Rx = DCsurvey.srcList[ii].rxList[0].locs
nD = DCsurvey.srcList[ii].rxList[0].nD
data = DCsurvey.dobs[count:count + nD]
count += nD
# Get distances between each poles A-B-M-N
if stype == 'pdp':
MA = np.abs(Tx[0] - Rx[0][:, 0])
NA = np.abs(Tx[0] - Rx[1][:, 0])
MN = np.abs(Rx[1][:, 0] - Rx[0][:, 0])
# Create mid-point location
Cmid = Tx[0]
Pmid = (Rx[0][:, 0] + Rx[1][:, 0]) / 2
if DCsurvey.mesh.dim == 2:
zsrc = Tx[1]
elif DCsurvey.mesh.dim == 3:
zsrc = Tx[2]
elif stype == 'dpdp':
MA = np.abs(Tx[0][0] - Rx[0][:, 0])
MB = np.abs(Tx[1][0] - Rx[0][:, 0])
NA = np.abs(Tx[0][0] - Rx[1][:, 0])
NB = np.abs(Tx[1][0] - Rx[1][:, 0])
# Create mid-point location
Cmid = (Tx[0][0] + Tx[1][0]) / 2
Pmid = (Rx[0][:, 0] + Rx[1][:, 0]) / 2
if DCsurvey.mesh.dim == 2:
zsrc = (Tx[0][1] + Tx[1][1]) / 2
elif DCsurvey.mesh.dim == 3:
zsrc = (Tx[0][2] + Tx[1][2]) / 2
# Change output for dtype
if dtype == 'volt':
rho = np.hstack([rho, data])
else:
# Compute pant leg of apparent rho
if stype == 'pdp':
leg = data * 2 * np.pi * MA * (MA + MN) / MN
elif stype == 'dpdp':
leg = data * 2 * np.pi / (1 / MA - 1 / MB + 1 / NB - 1 / NA)
LEG.append(1. / (2 * np.pi) *
(1 / MA - 1 / MB + 1 / NB - 1 / NA))
else:
print """dtype must be 'pdp'(pole-dipole) | 'dpdp' (dipole-dipole) """
break
if dtype == 'appc':
leg = np.log10(abs(1. / leg))
rho = np.hstack([rho, leg])
elif dtype == 'appr':
leg = np.log10(abs(leg))
rho = np.hstack([rho, leg])
else:
print """dtype must be 'appr' | 'appc' | 'volt' """
break
midx = np.hstack([midx, (Cmid + Pmid) / 2])
if DCsurvey.mesh.dim == 3:
midz = np.hstack([midz, -np.abs(Cmid - Pmid) / 2 + zsrc])
elif DCsurvey.mesh.dim == 2:
midz = np.hstack([midz, -np.abs(Cmid - Pmid) / 2 + zsrc])
ax = axs
# Grid points
grid_x, grid_z = np.mgrid[np.min(midx):np.max(midx),
np.min(midz):np.max(midz)]
grid_rho = griddata(np.c_[midx, midz],
rho.T, (grid_x, grid_z),
method='linear')
if clim == None:
vmin, vmax = rho.min(), rho.max()
else:
vmin, vmax = clim[0], clim[1]
grid_rho = np.ma.masked_where(np.isnan(grid_rho), grid_rho)
ph = plt.pcolormesh(grid_x[:, 0],
grid_z[0, :],
grid_rho.T,
clim=(vmin, vmax),
vmin=vmin,
vmax=vmax)
cbar = plt.colorbar(format="$10^{%.1f}$",
fraction=0.04,
orientation="horizontal")
cmin, cmax = cbar.get_clim()
ticks = np.linspace(cmin, cmax, 3)
cbar.set_ticks(ticks)
cbar.ax.tick_params(labelsize=10)
if dtype == 'appc':
cbar.set_label("App.Cond", size=12)
elif dtype == 'appr':
cbar.set_label("App.Res.", size=12)
elif dtype == 'volt':
cbar.set_label("Potential (V)", size=12)
# Plot apparent resistivity
ax.scatter(midx,
midz,
s=10,
c=rho.T,
vmin=vmin,
vmax=vmax,
clim=(vmin, vmax))
#ax.set_xticklabels([])
#ax.set_yticklabels([])
plt.gca().set_aspect('equal', adjustable='box')
return ph, LEG
def run(plotIt=True):
"""
1D FDEM and TDEM inversions
===========================
This example is used in the paper Heagy et al 2016 (in prep)
"""
# Set up cylindrically symmeric mesh
cs, ncx, ncz, npad = 10., 15, 25, 13 # padded cyl mesh
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
# Conductivity model
layerz = np.r_[-200., -100.]
layer = (mesh.vectorCCz >= layerz[0]) & (mesh.vectorCCz <= layerz[1])
active = mesh.vectorCCz < 0.
sig_half = 1e-2 # Half-space conductivity
sig_air = 1e-8 # Air conductivity
sig_layer = 5e-2 # Layer conductivity
sigma = np.ones(mesh.nCz)*sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
# Mapping
actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
mtrue = np.log(sigma[active])
# ----- FDEM problem & survey -----
rxlocs = Utils.ndgrid([np.r_[50.], np.r_[0], np.r_[0.]])
bzi = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'real')
bzr = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'imag')
freqs = np.logspace(2, 3, 5)
srcLoc = np.array([0., 0., 0.])
print('min skin depth = ', 500./np.sqrt(freqs.max() * sig_half),
'max skin depth = ', 500./np.sqrt(freqs.min() * sig_half))
print('max x ', mesh.vectorCCx.max(), 'min z ', mesh.vectorCCz.min(),
'max z ', mesh.vectorCCz.max())
srcList = []
[srcList.append(FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc,
orientation='Z')) for freq in freqs]
surveyFD = FDEM.Survey(srcList)
prbFD = FDEM.Problem3D_b(mesh, mapping=mapping)
prbFD.pair(surveyFD)
std = 0.03
surveyFD.makeSyntheticData(mtrue, std)
surveyFD.eps = np.linalg.norm(surveyFD.dtrue)*1e-5
# FDEM inversion
np.random.seed(1)
dmisfit = DataMisfit.l2_DataMisfit(surveyFD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion Directives
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest, target])
m0 = np.log(np.ones(mtrue.size)*sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbFD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptFD = inv.run(m0)
# TDEM problem
times = np.logspace(-4, np.log10(2e-3), 10)
print('min diffusion distance ', 1.28*np.sqrt(times.min()/(sig_half*mu_0)),
'max diffusion distance ', 1.28*np.sqrt(times.max()/(sig_half*mu_0)))
rx = TDEM.Rx(rxlocs, times, 'bz')
src = TDEM.Src.MagDipole([rx], waveform=TDEM.Src.StepOffWaveform(),
loc=srcLoc) # same src location as FDEM problem
surveyTD = TDEM.Survey([src])
prbTD = TDEM.Problem3D_b(mesh, mapping=mapping)
prbTD.timeSteps = [(5e-5, 10), (1e-4, 10), (5e-4, 10)]
prbTD.pair(surveyTD)
prbTD.Solver = SolverLU
std = 0.03
surveyTD.makeSyntheticData(mtrue, std)
surveyTD.std = std
surveyTD.eps = np.linalg.norm(surveyTD.dtrue)*1e-5
# TDEM inversion
dmisfit = DataMisfit.l2_DataMisfit(surveyTD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion Directives
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
inv = Inversion.BaseInversion(invProb, directiveList=[beta, betaest, target])
m0 = np.log(np.ones(mtrue.size)*sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbTD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptTD = inv.run(m0)
if plotIt:
import matplotlib
fig = plt.figure(figsize = (10, 8))
ax0 = plt.subplot2grid((2, 2), (0, 0), rowspan=2)
ax1 = plt.subplot2grid((2, 2), (0, 1))
ax2 = plt.subplot2grid((2, 2), (1, 1))
fs = 13 # fontsize
matplotlib.rcParams['font.size'] = fs
# Plot the model
ax0.semilogx(sigma[active], mesh.vectorCCz[active], 'k-', lw=2)
ax0.semilogx(np.exp(moptFD), mesh.vectorCCz[active], 'bo', ms=6)
ax0.semilogx(np.exp(moptTD), mesh.vectorCCz[active], 'r*', ms=10)
ax0.set_ylim(-700, 0)
ax0.set_xlim(5e-3, 1e-1)
ax0.set_xlabel('Conductivity (S/m)', fontsize=fs)
ax0.set_ylabel('Depth (m)', fontsize=fs)
ax0.grid(which='both', color='k', alpha=0.5, linestyle='-',
linewidth=0.2)
ax0.legend(['True', 'FDEM', 'TDEM'], fontsize=fs, loc=4)
# plot the data misfits - negative b/c we choose positive to be in the
# direction of primary
ax1.plot(freqs, -surveyFD.dobs[::2], 'k-', lw=2)
ax1.plot(freqs, -surveyFD.dobs[1::2], 'k--', lw=2)
dpredFD = surveyFD.dpred(moptTD)
ax1.loglog(freqs, -dpredFD[::2], 'bo', ms=6)
ax1.loglog(freqs, -dpredFD[1::2], 'b+', markeredgewidth=2., ms=10)
ax2.loglog(times, surveyTD.dobs, 'k-', lw=2)
ax2.loglog(times, surveyTD.dpred(moptTD), 'r*', ms=10)
ax2.set_xlim(times.min(), times.max())
# Labels, gridlines, etc
ax2.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.set_xlabel('Frequency (Hz)', fontsize=fs)
ax1.set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
ax2.set_xlabel('Time (s)', fontsize=fs)
ax2.set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
ax2.legend(("Obs", "Pred"), fontsize=fs)
ax1.legend(("Obs (real)", "Obs (imag)", "Pred (real)", "Pred (imag)"),
fontsize=fs)
ax1.set_xlim(freqs.max(), freqs.min())
ax0.set_title("(a) Recovered Models", fontsize=fs)
ax1.set_title("(b) FDEM observed vs. predicted", fontsize=fs)
ax2.set_title("(c) TDEM observed vs. predicted", fontsize=fs)
plt.tight_layout(pad=1.5)
plt.show()
def plot_pseudoSection(Tx,Rx,data,z0, stype):
from SimPEG import np, mkvc
from scipy.interpolate import griddata
from matplotlib.colors import LogNorm
import pylab as plt
import re
"""
Read list of 2D tx-rx location and plot a speudo-section of apparent
resistivity.
Assumes flat topo for now...
Input:
:param d2D, z0
:switch stype -> Either 'pdp' (pole-dipole) | 'dpdp' (dipole-dipole)
Output:
:figure scatter plot overlayed on image
Created on Mon December 7th, 2015
@author: dominiquef
"""
#d2D = np.asarray(d2D)
midl = []
midz = []
rho = []
for ii in range(len(Tx)):
# Get distances between each poles
rC1P1 = np.abs(Tx[ii][0] - Rx[ii][:,0])
rC2P1 = np.abs(Tx[ii][1] - Rx[ii][:,0])
rC1P2 = np.abs(Tx[ii][1] - Rx[ii][:,1])
rC2P2 = np.abs(Tx[ii][0] - Rx[ii][:,1])
rP1P2 = np.abs(Rx[ii][:,1] - Rx[ii][:,0])
# Compute apparent resistivity
if re.match(stype,'pdp'):
rho = np.hstack([rho, data[ii] * 2*np.pi * rC1P1 * ( rC1P1 + rP1P2 ) / rP1P2] )
elif re.match(stype,'dpdp'):
rho = np.hstack([rho, data[ii] * 2*np.pi / ( 1/rC1P1 - 1/rC2P1 - 1/rC1P2 + 1/rC2P2 ) ])
Cmid = (Tx[ii][0] + Tx[ii][1])/2
Pmid = (Rx[ii][:,0] + Rx[ii][:,1])/2
midl = np.hstack([midl, ( Cmid + Pmid )/2 ])
midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + z0 ])
# Grid points
grid_x, grid_z = np.mgrid[np.min(midl):np.max(midl), np.min(midz):np.max(midz)]
grid_rho = griddata(np.c_[midl,midz], np.log10(abs(1/rho.T)), (grid_x, grid_z), method='linear')
#plt.subplot(2,1,2)
plt.imshow(grid_rho.T, extent = (np.min(midl),np.max(midl),np.min(midz),np.max(midz)), origin='lower', alpha=0.8)
cbar = plt.colorbar(format = '%.2f',fraction=0.02)
cmin,cmax = cbar.get_clim()
ticks = np.linspace(cmin,cmax,3)
cbar.set_ticks(ticks)
# Plot apparent resistivity
plt.scatter(midl,midz,s=50,c=np.log10(abs(1/rho.T)))
def plot_pseudoSection(DCsurvey, axs, stype='dpdp', dtype="appc", clim=None):
"""
Read list of 2D tx-rx location and plot a speudo-section of apparent
resistivity.
Assumes flat topo for now...
Input:
:param d2D, z0
:switch stype -> Either 'pdp' (pole-dipole) | 'dpdp' (dipole-dipole)
:switch dtype=-> Either 'appr' (app. res) | 'appc' (app. con) | 'volt' (potential)
Output:
:figure scatter plot overlayed on image
Edited Feb 17th, 2016
@author: dominiquef
"""
from SimPEG import np
from scipy.interpolate import griddata
import pylab as plt
# Set depth to 0 for now
z0 = 0.
# Pre-allocate
midx = []
midz = []
rho = []
LEG = []
count = 0 # Counter for data
for ii in range(DCsurvey.nSrc):
Tx = DCsurvey.srcList[ii].loc
Rx = DCsurvey.srcList[ii].rxList[0].locs
nD = DCsurvey.srcList[ii].rxList[0].nD
data = DCsurvey.dobs[count:count+nD]
count += nD
# Get distances between each poles A-B-M-N
if stype == 'pdp':
MA = np.abs(Tx[0] - Rx[0][:,0])
NA = np.abs(Tx[0] - Rx[1][:,0])
MN = np.abs(Rx[1][:,0] - Rx[0][:,0])
# Create mid-point location
Cmid = Tx[0]
Pmid = (Rx[0][:,0] + Rx[1][:,0])/2
if DCsurvey.mesh.dim == 2:
zsrc = Tx[1]
elif DCsurvey.mesh.dim ==3:
zsrc = Tx[2]
elif stype == 'dpdp':
MA = np.abs(Tx[0][0] - Rx[0][:,0])
MB = np.abs(Tx[1][0] - Rx[0][:,0])
NA = np.abs(Tx[0][0] - Rx[1][:,0])
NB = np.abs(Tx[1][0] - Rx[1][:,0])
# Create mid-point location
Cmid = (Tx[0][0] + Tx[1][0])/2
Pmid = (Rx[0][:,0] + Rx[1][:,0])/2
if DCsurvey.mesh.dim == 2:
zsrc = (Tx[0][1] + Tx[1][1])/2
elif DCsurvey.mesh.dim ==3:
zsrc = (Tx[0][2] + Tx[1][2])/2
# Change output for dtype
if dtype == 'volt':
rho = np.hstack([rho,data])
else:
# Compute pant leg of apparent rho
if stype == 'pdp':
leg = data * 2*np.pi * MA * ( MA + MN ) / MN
elif stype == 'dpdp':
leg = data * 2*np.pi / ( 1/MA - 1/MB + 1/NB - 1/NA )
LEG.append(1./(2*np.pi) *( 1/MA - 1/MB + 1/NB - 1/NA ))
else:
print("""dtype must be 'pdp'(pole-dipole) | 'dpdp' (dipole-dipole) """)
break
if dtype == 'appc':
leg = np.log10(abs(1./leg))
rho = np.hstack([rho,leg])
elif dtype == 'appr':
leg = np.log10(abs(leg))
rho = np.hstack([rho,leg])
else:
print("""dtype must be 'appr' | 'appc' | 'volt' """)
break
midx = np.hstack([midx, ( Cmid + Pmid )/2 ])
if DCsurvey.mesh.dim==3:
midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + zsrc ])
elif DCsurvey.mesh.dim==2:
midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + zsrc ])
ax = axs
# Grid points
grid_x, grid_z = np.mgrid[np.min(midx):np.max(midx), np.min(midz):np.max(midz)]
grid_rho = griddata(np.c_[midx,midz], rho.T, (grid_x, grid_z), method='linear')
if clim == None:
vmin, vmax = rho.min(), rho.max()
else:
vmin, vmax = clim[0], clim[1]
grid_rho = np.ma.masked_where(np.isnan(grid_rho), grid_rho)
ph = plt.pcolormesh(grid_x[:,0],grid_z[0,:],grid_rho.T, clim=(vmin, vmax), vmin=vmin, vmax=vmax)
cbar = plt.colorbar(format="$10^{%.1f}$",fraction=0.04,orientation="horizontal")
cmin,cmax = cbar.get_clim()
ticks = np.linspace(cmin,cmax,3)
cbar.set_ticks(ticks)
cbar.ax.tick_params(labelsize=10)
if dtype == 'appc':
cbar.set_label("App.Cond",size=12)
elif dtype == 'appr':
cbar.set_label("App.Res.",size=12)
elif dtype == 'volt':
cbar.set_label("Potential (V)",size=12)
# Plot apparent resistivity
ax.scatter(midx,midz,s=10,c=rho.T, vmin =vmin, vmax = vmax, clim=(vmin, vmax))
#ax.set_xticklabels([])
#ax.set_yticklabels([])
plt.gca().set_aspect('equal', adjustable='box')
return ph, LEG
def run(loc=None, sig=None, radi=None, param=None, stype='dpdp', plotIt=True):
"""
DC Forward Simulation
=====================
Forward model conductive spheres in a half-space and plot a pseudo-section
Created by @fourndo on Mon Feb 01 19:28:06 2016
"""
assert stype in [
'pdp', 'dpdp'
], "Source type (stype) must be pdp or dpdp (pole dipole or dipole dipole)"
if loc is None:
loc = np.c_[[-50., 0., -50.], [50., 0., -50.]]
if sig is None:
sig = np.r_[1e-2, 1e-1, 1e-3]
if radi is None:
radi = np.r_[25., 25.]
if param is None:
param = np.r_[30., 30., 5]
# First we need to create a mesh and a model.
# This is our mesh
dx = 5.
hxind = [(dx, 15, -1.3), (dx, 75), (dx, 15, 1.3)]
hyind = [(dx, 15, -1.3), (dx, 10), (dx, 15, 1.3)]
hzind = [(dx, 15, -1.3), (dx, 15)]
mesh = Mesh.TensorMesh([hxind, hyind, hzind], 'CCN')
# Set background conductivity
model = np.ones(mesh.nC) * sig[0]
# First anomaly
ind = Utils.ModelBuilder.getIndicesSphere(loc[:, 0], radi[0], mesh.gridCC)
model[ind] = sig[1]
# Second anomaly
ind = Utils.ModelBuilder.getIndicesSphere(loc[:, 1], radi[1], mesh.gridCC)
model[ind] = sig[2]
# Get index of the center
indy = int(mesh.nCy / 2)
# Plot the model for reference
# Define core mesh extent
xlim = 200
zlim = 125
# Specify the survey type: "pdp" | "dpdp"
# Then specify the end points of the survey. Let's keep it simple for now and survey above the anomalies, top of the mesh
ends = [(-175, 0), (175, 0)]
ends = np.c_[np.asarray(ends), np.ones(2).T * mesh.vectorNz[-1]]
# Snap the endpoints to the grid. Easier to create 2D section.
indx = Utils.closestPoints(mesh, ends)
locs = np.c_[mesh.gridCC[indx, 0], mesh.gridCC[indx, 1],
np.ones(2).T * mesh.vectorNz[-1]]
# We will handle the geometry of the survey for you and create all the combination of tx-rx along line
# [Tx, Rx] = DC.gen_DCIPsurvey(locs, mesh, stype, param[0], param[1], param[2])
survey, Tx, Rx = DC.gen_DCIPsurvey(locs, mesh, stype, param[0], param[1],
param[2])
# Define some global geometry
dl_len = np.sqrt(np.sum((locs[0, :] - locs[1, :])**2))
dl_x = (Tx[-1][0, 1] - Tx[0][0, 0]) / dl_len
dl_y = (Tx[-1][1, 1] - Tx[0][1, 0]) / dl_len
azm = np.arctan(dl_y / dl_x)
#Set boundary conditions
mesh.setCellGradBC('neumann')
# Define the differential operators needed for the DC problem
Div = mesh.faceDiv
Grad = mesh.cellGrad
Msig = Utils.sdiag(1. / (mesh.aveF2CC.T * (1. / model)))
A = Div * Msig * Grad
# Change one corner to deal with nullspace
A[0, 0] = 1
A = sp.csc_matrix(A)
# We will solve the system iteratively, so a pre-conditioner is helpful
# This is simply a Jacobi preconditioner (inverse of the main diagonal)
dA = A.diagonal()
P = sp.spdiags(1 / dA, 0, A.shape[0], A.shape[0])
# Now we can solve the system for all the transmitters
# We want to store the data
data = []
# There is probably a more elegant way to do this, but we can just for-loop through the transmitters
for ii in range(len(Tx)):
start_time = time.time() # Let's time the calculations
#print("Transmitter %i / %i\r" % (ii+1,len(Tx)))
# Select dipole locations for receiver
rxloc_M = np.asarray(Rx[ii][:, 0:3])
rxloc_N = np.asarray(Rx[ii][:, 3:])
# For usual cases "dpdp" or "gradient"
if stype == 'pdp':
# Create an "inifinity" pole
tx = np.squeeze(Tx[ii][:, 0:1])
tinf = tx + np.array([dl_x, dl_y, 0]) * dl_len * 2
inds = Utils.closestPoints(mesh, np.c_[tx, tinf].T)
RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T,
'CC').T * ([-1] / mesh.vol[inds])
else:
inds = Utils.closestPoints(mesh, np.asarray(Tx[ii]).T)
RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T,
'CC').T * ([-1, 1] / mesh.vol[inds])
# Iterative Solve
Ainvb = sp.linalg.bicgstab(P * A, P * RHS, tol=1e-5)
# We now have the potential everywhere
phi = Utils.mkvc(Ainvb[0])
# Solve for phi on pole locations
P1 = mesh.getInterpolationMat(rxloc_M, 'CC')
P2 = mesh.getInterpolationMat(rxloc_N, 'CC')
# Compute the potential difference
dtemp = (P1 * phi - P2 * phi) * np.pi
data.append(dtemp)
print '\rTransmitter {0} of {1} -> Time:{2} sec'.format(
ii, len(Tx),
time.time() - start_time),
print 'Transmitter {0} of {1}'.format(ii, len(Tx))
print 'Forward completed'
# Let's just convert the 3D format into 2D (distance along line) and plot
# [Tx2d, Rx2d] = DC.convertObs_DC3D_to_2D(survey, np.ones(survey.nSrc))
survey2D = DC.convertObs_DC3D_to_2D(survey, np.ones(survey.nSrc))
survey2D.dobs = np.hstack(data)
# Here is an example for the first tx-rx array
if plotIt:
import matplotlib.pyplot as plt
fig = plt.figure()
ax = plt.subplot(2, 1, 1, aspect='equal')
mesh.plotSlice(np.log10(model), ax=ax, normal='Y', ind=indy, grid=True)
ax.set_title('E-W section at ' + str(mesh.vectorCCy[indy]) + ' m')
plt.gca().set_aspect('equal', adjustable='box')
plt.scatter(Tx[0][0, :], Tx[0][2, :], s=40, c='g', marker='v')
plt.scatter(Rx[0][:, 0::3], Rx[0][:, 2::3], s=40, c='y')
plt.xlim([-xlim, xlim])
plt.ylim([-zlim, mesh.vectorNz[-1] + dx])
ax = plt.subplot(2, 1, 2, aspect='equal')
# Plot the location of the spheres for reference
circle1 = plt.Circle((loc[0, 0] - Tx[0][0, 0], loc[2, 0]),
radi[0],
color='w',
fill=False,
lw=3)
circle2 = plt.Circle((loc[0, 1] - Tx[0][0, 0], loc[2, 1]),
radi[1],
color='k',
fill=False,
lw=3)
ax.add_artist(circle1)
ax.add_artist(circle2)
# Add the speudo section
DC.plot_pseudoSection(survey2D, ax, stype)
# plt.scatter(Tx2d[0][:],Tx[0][2,:],s=40,c='g', marker='v')
# plt.scatter(Rx2d[0][:],Rx[0][:,2::3],s=40,c='y')
# plt.plot(np.r_[Tx2d[0][0],Rx2d[-1][-1,-1]],np.ones(2)*mesh.vectorNz[-1], color='k')
plt.ylim([-zlim, mesh.vectorNz[-1] + dx])
plt.show()
return fig, ax
def run(loc=None, sig=None, radi=None, param=None, stype='dpdp', plotIt=True):
"""
DC Forward Simulation
=====================
Forward model conductive spheres in a half-space and plot a pseudo-section
Created by @fourndo on Mon Feb 01 19:28:06 2016
"""
assert stype in ['pdp', 'dpdp'], "Source type (stype) must be pdp or dpdp (pole dipole or dipole dipole)"
if loc is None:
loc = np.c_[[-50.,0.,-50.],[50.,0.,-50.]]
if sig is None:
sig = np.r_[1e-2,1e-1,1e-3]
if radi is None:
radi = np.r_[25.,25.]
if param is None:
param = np.r_[30.,30.,5]
# First we need to create a mesh and a model.
# This is our mesh
dx = 5.
hxind = [(dx,15,-1.3), (dx, 75), (dx,15,1.3)]
hyind = [(dx,15,-1.3), (dx, 10), (dx,15,1.3)]
hzind = [(dx,15,-1.3),(dx, 15)]
mesh = Mesh.TensorMesh([hxind, hyind, hzind], 'CCN')
# Set background conductivity
model = np.ones(mesh.nC) * sig[0]
# First anomaly
ind = Utils.ModelBuilder.getIndicesSphere(loc[:,0],radi[0],mesh.gridCC)
model[ind] = sig[1]
# Second anomaly
ind = Utils.ModelBuilder.getIndicesSphere(loc[:,1],radi[1],mesh.gridCC)
model[ind] = sig[2]
# Get index of the center
indy = int(mesh.nCy/2)
# Plot the model for reference
# Define core mesh extent
xlim = 200
zlim = 125
# Specify the survey type: "pdp" | "dpdp"
# Then specify the end points of the survey. Let's keep it simple for now and survey above the anomalies, top of the mesh
ends = [(-175,0),(175,0)]
ends = np.c_[np.asarray(ends),np.ones(2).T*mesh.vectorNz[-1]]
# Snap the endpoints to the grid. Easier to create 2D section.
indx = Utils.closestPoints(mesh, ends )
locs = np.c_[mesh.gridCC[indx,0],mesh.gridCC[indx,1],np.ones(2).T*mesh.vectorNz[-1]]
# We will handle the geometry of the survey for you and create all the combination of tx-rx along line
# [Tx, Rx] = DC.gen_DCIPsurvey(locs, mesh, stype, param[0], param[1], param[2])
survey, Tx, Rx = DC.gen_DCIPsurvey(locs, mesh, stype, param[0], param[1], param[2])
# Define some global geometry
dl_len = np.sqrt( np.sum((locs[0,:] - locs[1,:])**2) )
dl_x = ( Tx[-1][0,1] - Tx[0][0,0] ) / dl_len
dl_y = ( Tx[-1][1,1] - Tx[0][1,0] ) / dl_len
azm = np.arctan(dl_y/dl_x)
#Set boundary conditions
mesh.setCellGradBC('neumann')
# Define the differential operators needed for the DC problem
Div = mesh.faceDiv
Grad = mesh.cellGrad
Msig = Utils.sdiag(1./(mesh.aveF2CC.T*(1./model)))
A = Div*Msig*Grad
# Change one corner to deal with nullspace
A[0,0] = 1
A = sp.csc_matrix(A)
# We will solve the system iteratively, so a pre-conditioner is helpful
# This is simply a Jacobi preconditioner (inverse of the main diagonal)
dA = A.diagonal()
P = sp.spdiags(1/dA,0,A.shape[0],A.shape[0])
# Now we can solve the system for all the transmitters
# We want to store the data
data = []
# There is probably a more elegant way to do this, but we can just for-loop through the transmitters
for ii in range(len(Tx)):
start_time = time.time() # Let's time the calculations
#print("Transmitter %i / %i\r" % (ii+1,len(Tx)))
# Select dipole locations for receiver
rxloc_M = np.asarray(Rx[ii][:,0:3])
rxloc_N = np.asarray(Rx[ii][:,3:])
# For usual cases "dpdp" or "gradient"
if stype == 'pdp':
# Create an "inifinity" pole
tx = np.squeeze(Tx[ii][:,0:1])
tinf = tx + np.array([dl_x,dl_y,0])*dl_len*2
inds = Utils.closestPoints(mesh, np.c_[tx,tinf].T)
RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T, 'CC').T*( [-1] / mesh.vol[inds] )
else:
inds = Utils.closestPoints(mesh, np.asarray(Tx[ii]).T )
RHS = mesh.getInterpolationMat(np.asarray(Tx[ii]).T, 'CC').T*( [-1,1] / mesh.vol[inds] )
# Iterative Solve
Ainvb = sp.linalg.bicgstab(P*A,P*RHS, tol=1e-5)
# We now have the potential everywhere
phi = Utils.mkvc(Ainvb[0])
# Solve for phi on pole locations
P1 = mesh.getInterpolationMat(rxloc_M, 'CC')
P2 = mesh.getInterpolationMat(rxloc_N, 'CC')
# Compute the potential difference
dtemp = (P1*phi - P2*phi)*np.pi
data.append( dtemp )
print '\rTransmitter {0} of {1} -> Time:{2} sec'.format(ii,len(Tx),time.time()- start_time),
print 'Transmitter {0} of {1}'.format(ii,len(Tx))
print 'Forward completed'
# Let's just convert the 3D format into 2D (distance along line) and plot
# [Tx2d, Rx2d] = DC.convertObs_DC3D_to_2D(survey, np.ones(survey.nSrc))
survey2D = DC.convertObs_DC3D_to_2D(survey, np.ones(survey.nSrc))
survey2D.dobs =np.hstack(data)
# Here is an example for the first tx-rx array
if plotIt:
import matplotlib.pyplot as plt
fig = plt.figure()
ax = plt.subplot(2,1,1, aspect='equal')
mesh.plotSlice(np.log10(model), ax =ax, normal = 'Y', ind = indy,grid=True)
ax.set_title('E-W section at '+str(mesh.vectorCCy[indy])+' m')
plt.gca().set_aspect('equal', adjustable='box')
plt.scatter(Tx[0][0,:],Tx[0][2,:],s=40,c='g', marker='v')
plt.scatter(Rx[0][:,0::3],Rx[0][:,2::3],s=40,c='y')
plt.xlim([-xlim,xlim])
plt.ylim([-zlim,mesh.vectorNz[-1]+dx])
ax = plt.subplot(2,1,2, aspect='equal')
# Plot the location of the spheres for reference
circle1=plt.Circle((loc[0,0]-Tx[0][0,0],loc[2,0]),radi[0],color='w',fill=False, lw=3)
circle2=plt.Circle((loc[0,1]-Tx[0][0,0],loc[2,1]),radi[1],color='k',fill=False, lw=3)
ax.add_artist(circle1)
ax.add_artist(circle2)
# Add the speudo section
DC.plot_pseudoSection(survey2D,ax,stype)
# plt.scatter(Tx2d[0][:],Tx[0][2,:],s=40,c='g', marker='v')
# plt.scatter(Rx2d[0][:],Rx[0][:,2::3],s=40,c='y')
# plt.plot(np.r_[Tx2d[0][0],Rx2d[-1][-1,-1]],np.ones(2)*mesh.vectorNz[-1], color='k')
plt.ylim([-zlim,mesh.vectorNz[-1]+dx])
plt.show()
return fig, ax
def plot_pseudoSection(DCsurvey, axs, stype):
"""
Read list of 2D tx-rx location and plot a speudo-section of apparent
resistivity.
Assumes flat topo for now...
Input:
:param d2D, z0
:switch stype -> Either 'pdp' (pole-dipole) | 'dpdp' (dipole-dipole)
Output:
:figure scatter plot overlayed on image
Edited Feb 17th, 2016
@author: dominiquef
"""
from SimPEG import np
from scipy.interpolate import griddata
import pylab as plt
# Set depth to 0 for now
z0 = 0.
# Pre-allocate
midx = []
midz = []
rho = []
count = 0 # Counter for data
for ii in range(DCsurvey.nSrc):
Tx = DCsurvey.srcList[ii].loc
Rx = DCsurvey.srcList[ii].rxList[0].locs
nD = DCsurvey.srcList[ii].rxList[0].nD
data = DCsurvey.dobs[count:count+nD]
count += nD
# Get distances between each poles A-B-M-N
MA = np.abs(Tx[0][0] - Rx[0][:,0])
MB = np.abs(Tx[1][0] - Rx[0][:,0])
NB = np.abs(Tx[1][0] - Rx[1][:,0])
NA = np.abs(Tx[0][0] - Rx[1][:,0])
MN = np.abs(Rx[1][:,0] - Rx[0][:,0])
# Create mid-point location
Cmid = (Tx[0][0] + Tx[1][0])/2
Pmid = (Rx[0][:,0] + Rx[1][:,0])/2
# Compute pant leg of apparent rho
if stype == 'pdp':
leg = data * 2*np.pi * MA * ( MA + MN ) / MN
leg = np.log10(abs(1/leg))
elif stype == 'dpdp':
leg = data * 2*np.pi / ( 1/MA - 1/MB - 1/NB + 1/NA )
midx = np.hstack([midx, ( Cmid + Pmid )/2 ])
midz = np.hstack([midz, -np.abs(Cmid-Pmid)/2 + z0 ])
rho = np.hstack([rho,leg])
ax = axs
# Grid points
grid_x, grid_z = np.mgrid[np.min(midx):np.max(midx), np.min(midz):np.max(midz)]
grid_rho = griddata(np.c_[midx,midz], rho.T, (grid_x, grid_z), method='linear')
plt.imshow(grid_rho.T, extent = (np.min(midx),np.max(midx),np.min(midz),np.max(midz)), origin='lower', alpha=0.8, vmin = np.min(rho), vmax = np.max(rho))
cbar = plt.colorbar(format = '%.2f',fraction=0.04,orientation="horizontal")
cmin,cmax = cbar.get_clim()
ticks = np.linspace(cmin,cmax,3)
cbar.set_ticks(ticks)
# Plot apparent resistivity
plt.scatter(midx,midz,s=50,c=rho.T)
ax.set_xticklabels([])
ax.set_ylabel('Z')
ax.yaxis.tick_right()
ax.yaxis.set_label_position('right')
plt.gca().set_aspect('equal', adjustable='box')
return ax
def run(plotIt=True):
"""
1D FDEM and TDEM inversions
===========================
This example is used in the paper Heagy et al 2016 (in prep)
"""
# Set up cylindrically symmeric mesh
cs, ncx, ncz, npad = 10., 15, 25, 13 # padded cyl mesh
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = Mesh.CylMesh([hx, 1, hz], '00C')
# Conductivity model
layerz = np.r_[-200., -100.]
layer = (mesh.vectorCCz >= layerz[0]) & (mesh.vectorCCz <= layerz[1])
active = mesh.vectorCCz < 0.
sig_half = 1e-2 # Half-space conductivity
sig_air = 1e-8 # Air conductivity
sig_layer = 5e-2 # Layer conductivity
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
# Mapping
actMap = Maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = Maps.ExpMap(mesh) * Maps.SurjectVertical1D(mesh) * actMap
mtrue = np.log(sigma[active])
# ----- FDEM problem & survey -----
rxlocs = Utils.ndgrid([np.r_[50.], np.r_[0], np.r_[0.]])
bzi = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'real')
bzr = FDEM.Rx.Point_bSecondary(rxlocs, 'z', 'imag')
freqs = np.logspace(2, 3, 5)
srcLoc = np.array([0., 0., 0.])
print('min skin depth = ', 500. / np.sqrt(freqs.max() * sig_half),
'max skin depth = ', 500. / np.sqrt(freqs.min() * sig_half))
print('max x ', mesh.vectorCCx.max(), 'min z ', mesh.vectorCCz.min(),
'max z ', mesh.vectorCCz.max())
srcList = [
FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc, orientation='Z')
for freq in freqs
]
surveyFD = FDEM.Survey(srcList)
prbFD = FDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prbFD.pair(surveyFD)
std = 0.03
surveyFD.makeSyntheticData(mtrue, std)
surveyFD.eps = np.linalg.norm(surveyFD.dtrue) * 1e-5
# FDEM inversion
np.random.seed(1)
dmisfit = DataMisfit.l2_DataMisfit(surveyFD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
# Inversion Directives
beta = Directives.BetaSchedule(coolingFactor=4, coolingRate=3)
betaest = Directives.BetaEstimate_ByEig(beta0_ratio=2.)
target = Directives.TargetMisfit()
directiveList = [beta, betaest, target]
inv = Inversion.BaseInversion(invProb, directiveList=directiveList)
m0 = np.log(np.ones(mtrue.size) * sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbFD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptFD = inv.run(m0)
# TDEM problem
times = np.logspace(-4, np.log10(2e-3), 10)
print('min diffusion distance ',
1.28 * np.sqrt(times.min() / (sig_half * mu_0)),
'max diffusion distance ',
1.28 * np.sqrt(times.max() / (sig_half * mu_0)))
rx = TDEM.Rx.Point_b(rxlocs, times, 'z')
src = TDEM.Src.MagDipole(
[rx],
waveform=TDEM.Src.StepOffWaveform(),
loc=srcLoc # same src location as FDEM problem
)
surveyTD = TDEM.Survey([src])
prbTD = TDEM.Problem3D_b(mesh, sigmaMap=mapping, Solver=Solver)
prbTD.timeSteps = [(5e-5, 10), (1e-4, 10), (5e-4, 10)]
prbTD.pair(surveyTD)
std = 0.03
surveyTD.makeSyntheticData(mtrue, std)
surveyTD.std = std
surveyTD.eps = np.linalg.norm(surveyTD.dtrue) * 1e-5
# TDEM inversion
dmisfit = DataMisfit.l2_DataMisfit(surveyTD)
regMesh = Mesh.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = Regularization.Simple(regMesh)
opt = Optimization.InexactGaussNewton(maxIterCG=10)
invProb = InvProblem.BaseInvProblem(dmisfit, reg, opt)
inv = Inversion.BaseInversion(invProb, directiveList=directiveList)
m0 = np.log(np.ones(mtrue.size) * sig_half)
reg.alpha_s = 5e-1
reg.alpha_x = 1.
prbTD.counter = opt.counter = Utils.Counter()
opt.remember('xc')
moptTD = inv.run(m0)
if plotIt:
plt.figure(figsize=(10, 8))
ax0 = plt.subplot2grid((2, 2), (0, 0), rowspan=2)
ax1 = plt.subplot2grid((2, 2), (0, 1))
ax2 = plt.subplot2grid((2, 2), (1, 1))
fs = 13 # fontsize
matplotlib.rcParams['font.size'] = fs
# Plot the model
ax0.semilogx(sigma[active], mesh.vectorCCz[active], 'k-', lw=2)
ax0.semilogx(np.exp(moptFD), mesh.vectorCCz[active], 'bo', ms=6)
ax0.semilogx(np.exp(moptTD), mesh.vectorCCz[active], 'r*', ms=10)
ax0.set_ylim(-700, 0)
ax0.set_xlim(5e-3, 1e-1)
ax0.set_xlabel('Conductivity (S/m)', fontsize=fs)
ax0.set_ylabel('Depth (m)', fontsize=fs)
ax0.grid(which='both',
color='k',
alpha=0.5,
linestyle='-',
linewidth=0.2)
ax0.legend(['True', 'FDEM', 'TDEM'], fontsize=fs, loc=4)
# plot the data misfits - negative b/c we choose positive to be in the
# direction of primary
ax1.plot(freqs, -surveyFD.dobs[::2], 'k-', lw=2)
ax1.plot(freqs, -surveyFD.dobs[1::2], 'k--', lw=2)
dpredFD = surveyFD.dpred(moptTD)
ax1.loglog(freqs, -dpredFD[::2], 'bo', ms=6)
ax1.loglog(freqs, -dpredFD[1::2], 'b+', markeredgewidth=2., ms=10)
ax2.loglog(times, surveyTD.dobs, 'k-', lw=2)
ax2.loglog(times, surveyTD.dpred(moptTD), 'r*', ms=10)
ax2.set_xlim(times.min(), times.max())
# Labels, gridlines, etc
ax2.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.grid(which='both', alpha=0.5, linestyle='-', linewidth=0.2)
ax1.set_xlabel('Frequency (Hz)', fontsize=fs)
ax1.set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
ax2.set_xlabel('Time (s)', fontsize=fs)
ax2.set_ylabel('Vertical magnetic field (-T)', fontsize=fs)
ax2.legend(("Obs", "Pred"), fontsize=fs)
ax1.legend(("Obs (real)", "Obs (imag)", "Pred (real)", "Pred (imag)"),
fontsize=fs)
ax1.set_xlim(freqs.max(), freqs.min())
ax0.set_title("(a) Recovered Models", fontsize=fs)
ax1.set_title("(b) FDEM observed vs. predicted", fontsize=fs)
ax2.set_title("(c) TDEM observed vs. predicted", fontsize=fs)
plt.tight_layout(pad=1.5)
#==============================================================================
# mesh2d = Mesh.TensorMesh([mesh.hx, mesh.hz], x0=(mesh.x0[0]-endl[0,0],mesh.x0[2]))
# m3D = np.reshape(model, (mesh.nCz, mesh.nCy, mesh.nCx))
# m2D = m3D[:,1,:]
#==============================================================================
plt.figure()
axs = plt.subplot(2,1,1)
plt.xlim([0,nc*dx])
plt.ylim([mesh2d.vectorNy[-1]-dl_len/2,mesh2d.vectorNy[-1]])
plt.gca().set_aspect('equal', adjustable='box')
plt.pcolormesh(mesh2d.vectorNx,mesh2d.vectorNy,np.log10(m2D),alpha=0.5, cmap='gray')#axes = [mesh2d.vectorNx[0],mesh2d.vectorNx[-1],mesh2d.vectorNy[0],mesh2d.vectorNy[-1]])
#mesh2d.plotImage(mkvc(m2D), grid=True, ax=axs)
#%% Plot pseudo section
DC.plot_pseudoSection(Tx2d,Rx2d,data,nz[-1],stype)
plt.colorbar
plt.show()
#%% Create dcin2d inversion files and run
inv_dir = home_dir + '\Inv2D'
if not os.path.exists(inv_dir):
os.makedirs(inv_dir)
mshfile2d = 'Mesh_2D.msh'
modfile2d = 'MtIsa_2D.con'
