def initUI(self):
self.parent.title("Buttons")
self.style = Style()
self.style.theme_use("default")
frame = Frame(self, relief=GROOVE, borderwidth=5)
frame.pack(fill=BOTH, expand=1)
self.pack(fill = BOTH, expand = 1)
self.imageLabel = Label(frame, image = "")
self.imageLabel.pack(fill=BOTH, expand=1)
closeButton = Button(self, text="Close")
closeButton.pack(side=RIGHT)
okButton = Button(self, text="OK")
okButton.pack(side=RIGHT)
options = [item for item in dir(cv2.cv) if item.startswith("CV_CAP_PROP")]
option = OptionMenu(self, self.key, *options)
self.key.set(options[0])
option.pack(side="left")
spin = Spinbox(self, from_=0, to=1, increment=0.05)
self.val = spin.get()
spin.pack(side="left")
class StarterWindow(Tk):
def __init__(self):
Tk.__init__(self)
self.wm_title("FRCA QBase Reader - Start Menu")
self.exambtn = Button(self, text="start an exam", command=self.startExam)
self.exambtn.pack()
self.maxquestvar = IntVar()
self.maxquest = Spinbox(self, from_=1, to=1667, width=4, textvariable=self.maxquestvar)
self.maxquest.pack()
self.questbtn = Button(self, text="start single questions", command=self.startQuestions)
self.questbtn.pack()
self.um = """User manual:\n
Start either an exam or single questions\n
Go to next question either with mouse or the <right arrow>\n
Toggle checkboxes either with mouse or <keyboard buttons 1-5>\n
In single question mode, show answer either with mouse or <return>\n
In exam mode, results will display after the set question number\n
Text can be made bigger/smaller with <Up> or <Down> keyboard arrows"""
self.usermanual = Label(self, text=self.um, justify=LEFT)
self.usermanual.pack()
def startExam(self):
call(["python", "exam.py", str(self.maxquestvar.get())])
def startQuestions(self):
call(["python", "quest_by_quest.py"])
def __init__(self):
# TTT related
self.ttt = Board(ply=9)
self.human_first = True
# UI related
self.root = Tk()
self.root.resizable(0, 0)
self.root.title("3D TTT")
# TTT frames
self.ttt_frames = [Frame(self.root) for x in range(3)]
for i in range(3):
self.ttt_frames[i].grid(row=0, column=i)
self.button_pos = dict()
self._init_board()
# control frame
self.control_frame = Frame(self.root, padx=5, pady=5)
self.control_frame.grid(row=1, column=1)
self.new_game_btn = Button(self.control_frame, text='New Game', \
command=lambda: self.reset())
self.new_game_btn.pack(side=LEFT, fill=BOTH, expand=True)
self.toggle_human_first_btn = Button(self.control_frame, \
text='Human First', command=lambda: self.toggle_human_first())
self.toggle_human_first_btn.pack(side=RIGHT, fill=BOTH, expand=True)
self.ply_box = Spinbox(self.control_frame, from_=1, to=20, \
textvariable=self.ttt.difficulty, command=lambda: self.reset())
self.ply_box.pack(side=RIGHT, fill=BOTH, expand=True)
# start UI
self.update_pieces()
self.start()
self.root.mainloop()
def __init__(self, root, prtr, settings, log, *arg):
LabelFrame.__init__(self, root, *arg, text="Extruder")
self.app = root
self.printer = prtr
self.settings = settings
self.log = log
self.bExtrude = Button(self, text="Extrude", width=10, command=self.doExtrude)
self.bExtrude.grid(row=1, column=1, padx=2)
self.spDistance = Spinbox(self, from_=1, to=MAXDIST, width=6, justify=RIGHT)
self.spDistance.grid(row=1, column=2)
self.spDistance.delete(0, END)
self.spDistance.insert(0, STARTDIST)
self.spDistance.bind("<FocusOut>", self.valDistance)
self.spDistance.bind("<Leave>", self.valDistance)
l = Label(self, text="mm", justify=LEFT)
l.grid(row=1, column=3, sticky=W)
self.bReverse = Button(self, text="Reverse", width=10, command=self.doReverse)
self.bReverse.grid(row=2, column=1, padx=2)
self.spSpeed = Spinbox(self, from_=1, to=MAXFEED, width=6, justify=RIGHT)
self.spSpeed.grid(row=2, column=2)
self.spSpeed.delete(0, END)
self.spSpeed.insert(0, self.settings.efeed)
self.spSpeed.bind("<FocusOut>", self.valSpeed)
self.spSpeed.bind("<Leave>", self.valSpeed)
l = Label(self, text="mm/min", justify=LEFT)
l.grid(row=2, column=3, sticky=W)
def create_btc_balance_picker(self,
master,
previous_row=-1,
previous_column=-1):
self.btc_balance_str = StringVar()
btc_balance_lbl = Label(master, textvar=self.btc_balance_str)
btc_balance_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=2,
sticky=W + E,
padx=(3, 0))
btc_balance_lbl.config(bg=background_colour, fg=label_font_colour)
self.set_available_btc_balance(Decimal(0))
btc_to_use_label = Label(master,
text="BTC to spend:",
bg=background_colour,
fg=label_font_colour)
btc_to_use_label.grid(row=previous_row + 2,
column=previous_column + 1,
sticky=E,
padx=(3, 0))
self.btc_to_use_spinbox = Spinbox(
master,
from_=minimum_trade,
to=minimum_trade,
increment=btc_to_use_increment,
highlightbackground=background_colour)
self.btc_to_use_spinbox.config(borderwidth=2, relief=default_relief)
self.btc_to_use_spinbox.grid(row=previous_row + 2,
column=previous_column + 2)
def initUI(self):
self.frame_top = Frame(self)
self.frame_graph = MplCanvas(self)
self.frame_bottom = Frame(self)
Label(self.frame_top, text='Z = ').pack(side=LEFT)
self.spin_z = Spinbox(self.frame_top,
from_=0,
to=self.shape[2] - 1,
increment=1,
command=self.change_z)
self.spin_z.pack(side=LEFT)
self.make_checkbox(self.frame_bottom, width=4)
Label(self.frame_top, text=' CSV').pack(side=LEFT)
self.txt_filename_csv = Entry(self.frame_top)
self.txt_filename_csv.pack(side=LEFT)
self.button_read = Button(self.frame_top,
text='Read',
command=self.run_read)
self.button_read.pack(side=LEFT)
self.button_save = Button(self.frame_top,
text='Save',
command=self.run_save)
self.button_save.pack(side=LEFT)
Label(self.frame_top, text=' ').pack(side=LEFT)
button_reset = Button(self.frame_top, text='Reset',
command=self.reset).pack(side=LEFT)
self.frame_top.pack(side=TOP)
self.frame_graph.get_tk_widget().pack(fill=BOTH, expand=TRUE)
self.frame_bottom.pack(fill=BOTH, expand=TRUE)
self.pack(fill=BOTH, expand=True)
def createSnakeSpinBoxes(self):
frame = Frame(self.menuFrame, width=300)
from_ = 0
to = 255
vcmd = (self.register(self.validateSpinBox),'%d', '%i', '%P', '%s', '%S', '%v', '%V', '%W')
label1 = Label(frame, text="Parametr 1")
self.snakeValue1 = StringVar()
self.snakeSpinBox = Spinbox(frame, textvariable=self.snakeValue1, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label2 = Label(frame, text="Parametr 2")
self.snakeValue2 = StringVar()
self.snakeSpinBox2 = Spinbox(frame, textvariable=self.snakeValue2, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label3 = Label(frame, text="Parametr 3")
self.snakeValue3 = StringVar()
self.snakeSpinBox3 = Spinbox(frame, textvariable=self.snakeValue3, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label1.grid(row=0, column=0, padx=(0,10), stick=N+W)
label2.grid(row=1, column=0, padx=(0,10), stick=N+W)
label3.grid(row=2, column=0, padx=(0,10), stick=N+W)
self.snakeSpinBox.grid(row=0, column=1, stick=N+W)
self.snakeSpinBox2.grid(row=1, column=1, stick=N+W)
self.snakeSpinBox3.grid(row=2, column=1, stick=N+W)
return frame
def _add_count(self, frame, index, name, default, option) :
self.function[-1] = lambda v : [option]*int(v)
self.variables[-1] = StringVar()
self.variables[-1].set(default)
label = Label(frame, text=name)
label.grid(row=index, column=0, sticky='W', padx=10)
field = Spinbox(frame, from_=0, to=100, textvariable=self.variables[-1])
field.grid(row=index, column=1, sticky='WE')
def __init__(self, frame, k):
Spinbox.__init__(self,
frame,
from_=0,
to=100000,
increment=50,
width=8)
self.k = k
def __init__(self, **kwargs):
master = None if 'master' not in kwargs else kwargs['master']
title = '' if 'title' not in kwargs else kwargs['title']
Frame.__init__(self, master)
self.val = IntVar()
self.lbl = Label(text=title)
self.lbl.grid(row=0, column=0, sticky=W, in_=self)
self.Spin = Spinbox(textvariable=self.val)
self.Spin.grid(row=0, column=1, sticky=W, in_=self)
class LabeledSpin(Frame):
def __init__(self, **kwargs):
master = None if 'master' not in kwargs else kwargs['master']
title = '' if 'title' not in kwargs else kwargs['title']
Frame.__init__(self, master)
self.val = IntVar()
self.lbl = Label(text=title)
self.lbl.grid(row=0, column=0, sticky=W, in_=self)
self.Spin = Spinbox(textvariable=self.val)
self.Spin.grid(row=0, column=1, sticky=W, in_=self)
def create_entry(self, cadence=None):
if cadence is None:
if len(self.cadences) > 0:
cadence = int(self.cadences[-1].get()) + 10
else:
cadence = 40
cadenceent = Spinbox(from_=10, to=180, width=3, master=self)
cadenceent.delete(0, END)
cadenceent.insert(0, cadence)
self.cadences.append(cadenceent)
def ventanaImprimir(self):
t = Toplevel(self)
t.wm_title("Imprimir")
Label(t, text="Numero de Copias por etiqueta").pack()
w = Spinbox(t, from_=1, to=10)
w.pack()
buttonImprimir = Button(t, text="Imprimir", command=lambda:self.imprimir(int(w.get()),t))
buttonImprimir.pack()
def initUI(self):
# Main Window
self.parent.title("gBot")
self.style = Style()
self.style.theme_use("default")
self.pack(fill=BOTH, expand=1)
# Debug Window
Toplevel1 = Toplevel(self)
Toplevel1.title("gBot Debug Console")
self.pack(fill=BOTH, expand=1)
TL_T1 = Text(Toplevel1, width=50)
TL_T1.pack()
Toplevel1.state("withdrawn")
Toplevel1.protocol('WM_DELETE_WINDOW', lambda:Toplevel1.state("withdrawn"))
Toplevel1.attributes("-topmost", True)
# Username Input
L1 = Label(self, text="G+ User Name")
L1.grid(row=0, column=0, sticky=E, ipady=1)
E1 = Entry(self, width=30)
E1.grid(row=0, column=1, ipady=1, sticky=E)
# Password Input
L2 = Label(self, text="G+ Password")
L2.grid(row=1, column=0, sticky=E, ipady=1)
E2 = Entry(self, width=30)
E2.grid(row=1, column=1, ipady=1, sticky=E)
# Output Path Input
L3 = Label(self, text="Output Path")
L3.grid(row=2, column=0, sticky=E, pady=1)
E3 = Entry(self, width=30)
E3.grid(row=2, column=1, ipady=1, sticky=E)
E3.insert(0, "%s\links.txt" % (os.getcwd()))
# Num Posts
L4 = Label(self, text="# Of Posts")
L4.grid(row=3, column=0, sticky=E, pady=1)
S1 = Spinbox(self, from_=1, to=9999999, width=28)
S1.grid(row=3, column=1, ipady=1, sticky=E)
# Post Input
T1 = Text(self, width=30)
T1.grid(row=5, columnspan=2, sticky=W+E, pady=1)
# Start button
B1 = Button(self, text="Start Posting", command=lambda:self.doPosting(B1,TL_T1,E1.get(),E2.get(),T1.get(1.0,END),E3.get(),S1.get()))
B1.grid(row=6,columnspan=2, sticky=W+E)
# Debug button
B2 = Button(self, text="Debug log", command=lambda:Toplevel1.state("normal"))
B2.grid(row=7, columnspan=2, sticky=W+E)
self.addDebug(TL_T1,"Started successfully")
def buscar():
root = Tkinter.Toplevel()
jorn = Spinbox(root, from_=0, to=50)
def boton():
listar(jorn.get())
but = Tkinter.Button(root, text="Buscar", command=boton)
jorn.pack(side=LEFT)
but.pack(side=RIGHT)
root.mainloop()
def create_widgets(self):
self.count = StringVar()
self.count.set('0')
self.lbCount = ttk.Label(self.frame, text='Number of constraints:')
self.sbCount = Spinbox(self.frame, from_=0, to=1000, textvariable=self.count, width=10)
self.lbType = ttk.Label(self.frame, text='Type')
self.lbPrm1 = ttk.Label(self.frame, text='Parameter#1')
self.lbPrm2 = ttk.Label(self.frame, text='Parameter#2')
self.cbTypes = []
self.cbPrm1s = []
self.cbPrm2s = []
self.btOk = ttk.Button(self.frame, text='Ok', command=self.hide_window)
self.btHelp = ttk.Button(self.frame, text='Help', command=self.show_help)
def __init__(self, root, prtr, settings, log, *arg):
fn = os.path.join(settings.cmdFolder, "images", "control_xyz.png")
self.image = Image.open(fn)
self.photo = ImageTk.PhotoImage(self.image)
LabelFrame.__init__(self, root, *arg, text="Movement")
self.app = root
self.hilite = None
self.hilitemask = None
self.settings = settings
self.printer = prtr
self.log = log
l = Label(self, text="mm/min")
l.grid(row=1, column=2)
l = Label(self, text="X/Y Feed Rate:")
l.grid(row=2, column=1, sticky=E)
self.xyfeed = Spinbox(self, width=10, justify=RIGHT, from_=0, to=MAXFEED)
self.xyfeed.grid(row=2, column=2)
self.xyfeed.delete(0, END)
self.xyfeed.insert(0, settings.xyfeed)
self.xyfeed.bind("<FocusOut>", self.valxyFeed)
self.xyfeed.bind("<Leave>", self.valxyFeed)
l = Label(self, text="Z Feed Rate:")
l.grid(row=3, column=1, sticky=E)
self.zfeed = Spinbox(self, width=10, justify=RIGHT, from_=0, to=MAXFEED)
self.zfeed.grid(row=3, column=2)
self.zfeed.delete(0, END)
self.zfeed.insert(0, settings.zfeed)
self.zfeed.bind("<FocusOut>", self.valzFeed)
self.zfeed.bind("<Leave>", self.valzFeed)
self.canvas = Canvas(self, width=self.image.size[0], height=self.image.size[1], *arg)
self.canvas.create_image((0, 0), image=self.photo, anchor=N+W)
self.canvas.grid(row=4, column=1, columnspan=2)
for m in imageMasks:
self.canvas.create_oval((m[0][0]-mask_rad, m[0][1]-mask_rad, m[0][0]+mask_rad, m[0][1]+mask_rad),
outline="#FF0000", width=4, tags=m[1], state=HIDDEN)
self.canvas.bind("<Button-1>", self.OnLeftDown)
self.canvas.bind("<Motion>", self.OnMotion)
self.canvas.bind("<Enter>", self.OnEnter)
self.canvas.bind("<Leave>", self.OnLeave)
self.bAllOff = Button(self, text="Release Motors", command=self.allMotorsOff)
self.bAllOff.grid(row=5, column=1, columnspan=2)
def __init__(self, parent):
self.colorNegative = []
self.colorNeutral = []
self.colorPositive = []
self.scaleNegative = 0.0
self.scalePositive = 0.0
self.cNegative = '#ff0000'
self.cNeutral = '#000000'
self.cPositive = '#0000ff'
self.minNegativeLbl = Label(rootC, text='Min Found: -')
self.maxPositiveLbl = Label(rootC, text='Max Found: -')
self.scaleLbl = Label(rootC, text='Scale: - to -')
self.sclSelectPositive = Spinbox(rootC)
self.sclSelectPositive.insert(0, 0.0)
self.sclSelectNegative = Spinbox(rootC)
self.sclSelectNegative.insert(0, 0.0)
self.buttonNegativeCharge = Button(
rootC, text='Negative Charge Color', command=self.chooseNegativeCharge)
self.buttonNeutralCharge = Button(
rootC, text='Neutral Charge Color', command=self.chooseNeutralCharge)
self.buttonPositiveCharge = Button(
rootC, text='Positive Charge Color', command=self.choosePositiveCharge)
self.buttonBG = Button(
rootC, text='Background Color', command=self.chooseBackground)
self.buttonUpdateColor = Button(
rootC, text='Update', command=self.updateColor)
self.title = Label(rootC, text="Select your colors")
self.buttonClose = Button(rootC, text="Close", command=rootC.destroy)
self.buttonBG.pack()
self.title.pack()
self.buttonNegativeCharge.pack()
self.buttonNeutralCharge.pack()
self.buttonPositiveCharge.pack()
self.minNegativeLbl.pack()
self.maxPositiveLbl.pack()
self.scaleLbl.pack()
self.sclSelectNegative.pack()
self.sclSelectPositive.pack()
self.buttonUpdateColor.pack()
self.buttonClose.pack()
def printTurn(self):
frameS = PanedWindow(self.FrameInfo, orient=HORIZONTAL)
turns = Label(frameS, text="Tour :")
self.var.set(str(self.selectTurn))
self.Spin_T = Spinbox(frameS,
values=self.turns.keys(),
command=self.updateSpin_turn,
textvariable=self.var)
self.Spin_T.bind('<Return>', self.validateTurn)
turns.pack()
self.Spin_T.pack()
frameS.add(turns)
frameS.add(self.Spin_T)
frameS.pack()
self.frameT = frameS
def __init__(self):
# TTT related
self.ttt = Board(ply=9)
self.human_first = True
# UI related
self.root = Tk()
self.root.resizable(0, 0)
self.root.title("3D TTT")
# TTT frames
self.ttt_frames = [Frame(self.root) for x in range(3)]
for i in range(3):
self.ttt_frames[i].grid(row=0, column=i)
self.button_pos = dict()
self._init_board()
# control frame
self.control_frame = Frame(self.root, padx=5, pady=5)
self.control_frame.grid(row=1, column=1)
self.new_game_btn = Button(self.control_frame, text='New Game', \
command=lambda: self.reset())
self.new_game_btn.pack(side=LEFT, fill=BOTH, expand=True)
self.toggle_human_first_btn = Button(self.control_frame, \
text='Human First', command=lambda: self.toggle_human_first())
self.toggle_human_first_btn.pack(side=RIGHT, fill=BOTH, expand=True)
self.ply_box = Spinbox(self.control_frame, from_=1, to=20, \
textvariable=self.ttt.difficulty, command=lambda: self.reset())
self.ply_box.pack(side=RIGHT, fill=BOTH, expand=True)
# start UI
self.update_pieces()
self.start()
self.root.mainloop()
def __init__(self, parent=None, text='Year:', min_value=1950, max_value=2100, **kwargs):
# NOTE: This class used to be a subclass of Frame, but it did not grid properly
#Frame.__init__(self, parent)
self.label = Label(parent, text=text)
self.year = StringVar()
self.year_selector = Spinbox(parent, from_=min_value, to=max_value, textvariable=self.year, command=self.on_change, width=5)
self.set_args()
def __createWidgets(self):
self.__params = Frame(padx=5, pady=5)
Label(text='Letters: ', anchor=E).grid(row=0, column=0,
sticky=E, in_=self.__params)
self.__char_entry = Entry(width=10)
self.__chk1st = Checkbutton(variable=self.MANDATORY1stCHAR, command=self.__CB)
Label(text='First letter appears in every result ', anchor=W).grid(
row=0, column=4, sticky=E, in_=self.__params)
self.__char_entry.grid(row=0, column=1, columnspan=2,
sticky=W, in_=self.__params)
self.__chk1st.grid(row=0, column=3, sticky=W, in_=self.__params)
Label(text='Minimum length of result words: ', anchor=E).grid(
row=1, column=0, sticky=E, in_=self.__params)
self.__word_length_ctrl = Spinbox(from_=1, to=Application.MAXWORDLEN,
width=2)
self.__word_length_ctrl.delete(0, END)
self.__word_length_ctrl.insert(0, Application. DEFAULTWORDLEN)
self.__word_length_ctrl.grid(row=1, column=1, in_=self.__params,
sticky=W)
self.__go_button = Button(text='Go', command=self.__findWords)
self.__go_button.grid(row=1, column=2, sticky=E, in_=self.__params)
self.__Options = Menu()
self.__Options.add_command(label='Choose dictionary',
command=self.__choosedict)
self.__File = Menu()
self.__File.add_command(label='Export as ODT (Open document text)', command=self.__export)
self.__char_entry.focus_set()
self.__char_entry.bind("<Return>", self.__keyPressEnter)
class YearSelector():
def __init__(self, parent=None, text='Year:', min_value=1950, max_value=2100, **kwargs):
# NOTE: This class used to be a subclass of Frame, but it did not grid properly
#Frame.__init__(self, parent)
self.label = Label(parent, text=text)
self.year = StringVar()
self.year_selector = Spinbox(parent, from_=min_value, to=max_value, textvariable=self.year, command=self.on_change, width=5)
self.set_args()
def set_args(self, **kwargs):
self.check_other_func = kwargs['check_other_func'] if 'check_other_func' in kwargs else None
def get_value(self):
value = int(self.year.get())
return value
def set_value(self, value):
self.year.set(value)
def set_grid(self, row=0, padx=0, pady=0):
#self.grid(row=row)
self.label.grid(row=row, column=0, sticky='e')
self.year_selector.grid(row=row, column=1, padx=padx, pady=pady, sticky='w')
def on_change(self):
if self.check_other_func != None:
value = int(self.year.get())
new_value = self.check_other_func(value)
if value != new_value:
self.set_value(new_value)
else:
pass
def get_less_than(self, compare_value):
value = int(self.year.get())
compare_value = int(compare_value)
if value <= compare_value:
return value
return compare_value
def get_greater_than(self, compare_value):
value = int(self.year.get())
compare_value = int(compare_value)
if value >= compare_value:
return value
return compare_value
def listar(n):
conn = sqlite3.connect('marca.db')
root = Tkinter.Toplevel()
frame = Frame(root)
frame2 = Frame(root)
cursor = conn.execute("SELECT PARTIDO from CRONICAS WHERE JORNADA LIKE '" +
n + "'")
partidos = []
for c in cursor:
partidos.append(c[0])
def cambio():
cursor = conn.execute(
"SELECT CRONICA FROM CRONICAS WHERE PARTIDO LIKE '" +
partido.get() + "'")
for row in cursor:
sql = "SELECT * FROM GOLES WHERE CRONICA LIKE '%" + row[0] + "%'"
cursor = conn.execute(sql)
lista.delete(0, END)
i = 0
for row in cursor:
i += 1
lista.insert(
i, "EQUIPO: " + row[0] + " JUGADOR: " + row[1] +
" MINUTO: " + row[2])
partido = Spinbox(frame, values=partidos, command=cambio)
etiq = Label(frame, text="Elija Partido:")
barra = Scrollbar(frame2)
lista = Listbox(frame2, width=80, height=8)
frame.pack(side=LEFT)
frame2.pack(side=LEFT)
lista.pack(side=LEFT, fill=BOTH)
barra.pack(side=RIGHT, fill=Y)
barra.config(command=lista.yview)
etiq.pack(side=TOP)
partido.pack(side=RIGHT)
root.mainloop()
conn.close()
def create_stop_loss(self, master, previous_row=-1, previous_column=-1):
stop_loss_lbl = Label(master, text="Stop Loss (%):")
stop_loss_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
stop_loss_lbl.config(bg=background_colour, fg=label_font_colour)
self.stop_loss_spinbox = Spinbox(master,
from_=-100.0,
to=-10.0,
increment=1.0,
highlightbackground=background_colour)
self.stop_loss_spinbox.config(borderwidth=2, relief=default_relief)
self.stop_loss_spinbox.grid(row=previous_row + 1,
column=previous_column + 2)
self.stop_loss_spinbox.delete(0, "end")
self.stop_loss_spinbox.insert(0, -10)
def create_auto_sell(self, master, previous_row=-1, previous_column=-1):
auto_sell_lbl = Label(master, text="Auto Sell (%):")
auto_sell_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
auto_sell_lbl.config(bg=background_colour, fg=label_font_colour)
self.auto_sell_spinbox = Spinbox(master,
from_=1.0,
to=300.0,
increment=1.0,
highlightbackground=background_colour)
self.auto_sell_spinbox.config(borderwidth=2, relief=default_relief)
self.auto_sell_spinbox.grid(row=previous_row + 1,
column=previous_column + 2)
self.auto_sell_spinbox.delete(0, "end")
self.auto_sell_spinbox.insert(0, 50)
def init_slow_time(root):
slow_time_frame = Frame(root)
slow_time_frame.pack(fill=X)
slow_time_label = Label(slow_time_frame, text='Slowing time [0; 10] sec:')
slow_time_label.pack(side='left')
slow_time = Spinbox(slow_time_frame, from_=0, to=10, width=4)
slow_time.delete(0, 1)
slow_time.insert(0, 5)
slow_time.pack(side='right')
return slow_time_frame, slow_time_label, slow_time
def createCogSpinBoxes(self):
frame = Frame(self.menuFrame, width=300)
from_ = 0
to = 100
vcmd = (self.register(self.validateSpinBox),'%d', '%i', '%P', '%s', '%S', '%v', '%V', '%W')
label1 = Label(frame, text="Wsp. kary za rzadkość")
self.densityCoefficient = StringVar(value="10")
self.cogSpinBox = Spinbox(frame, textvariable=self.densityCoefficient, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label2 = Label(frame, text="Wsp. kary za odległość")
self.distanceFromCenterCoefficient = StringVar(value="60")
self.cogSpinBox2 = Spinbox(frame, textvariable=self.distanceFromCenterCoefficient, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label1.grid(row=0, column=0, padx=(0,10), stick=N+W)
label2.grid(row=1, column=0, padx=(0,10), stick=N+W)
self.cogSpinBox.grid(row=0, column=1, stick=N+W)
self.cogSpinBox2.grid(row=1, column=1, stick=N+W)
return frame
def init_speed_sup(root):
speed_sup_frame = Frame(root)
speed_sup_frame.pack(fill=X)
speed_sup_label = Label(speed_sup_frame,
text='Max initial speed [0; 200]:')
speed_sup_label.pack(side='left')
speed_sup = Spinbox(speed_sup_frame, from_=0, to=200, width=4)
speed_sup.delete(0, 1)
speed_sup.insert(0, 60)
speed_sup.pack(side='right')
return speed_sup_frame, speed_sup_label, speed_sup
def init_spawn_sup(root):
spawn_sup_frame = Frame(root)
spawn_sup_frame.pack(fill=X)
spawn_sup_label = Label(spawn_sup_frame,
text='Max spawn interval [0; 10] sec:')
spawn_sup_label.pack(side='left')
spawn_sup = Spinbox(spawn_sup_frame, from_=0, to=10, width=4)
spawn_sup.delete(0, 1)
spawn_sup.insert(0, 5)
spawn_sup.pack(side='right')
return spawn_sup_frame, spawn_sup_label, spawn_sup
def init_range_of_vision(root):
range_of_vision_frame = Frame(root)
range_of_vision_frame.pack(fill=X)
range_of_vision_label = Label(range_of_vision_frame,
text='Range of vision [1; 10] (in cars):')
range_of_vision_label.pack(side='left')
range_of_vision = Spinbox(range_of_vision_frame, from_=1, to=10, width=4)
range_of_vision.delete(0, 1)
range_of_vision.insert(0, 3)
range_of_vision.pack(side='right')
return range_of_vision_frame, range_of_vision_label, range_of_vision
def init_speed_inf(root):
speed_inf_frame = Frame(root)
speed_inf_frame.pack(fill=X)
speed_inf_label = Label(speed_inf_frame,
text='Min initial speed [0; 200]:')
speed_inf_label.pack(side='left')
speed_inf = Spinbox(speed_inf_frame, from_=0, to=200, width=4)
speed_inf.delete(0, 1)
speed_inf.insert(0, 30)
speed_inf.pack(side='right')
return speed_inf_frame, speed_inf_label, speed_inf
def printTurn(self):
frameS = PanedWindow(self.FrameInfo, orient=HORIZONTAL)
turns = Label(frameS, text="Tour :")
self.var.set(str(self.selectTurn))
self.Spin_T = Spinbox(frameS, values=self.turns.keys(), command =
self.updateSpin_turn ,textvariable=self.var)
self.Spin_T.bind('<Return>', self.validateTurn)
turns.pack()
self.Spin_T.pack()
frameS.add(turns)
frameS.add(self.Spin_T)
frameS.pack()
self.frameT = frameS
def createPreprocessBoxes(self):
frame = Frame(self.menuFrame, width=300)
from_ = 0
to = 100
vcmd = (self.register(self.validateSpinBox),'%d', '%i', '%P', '%s', '%S', '%v', '%V', '%W')
label1 = Label(frame, text="Erozja - ilosc przebiegow")
self.erosion = StringVar(value="2")
self.erosionSpinBox = Spinbox(frame, textvariable=self.erosion, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label1.grid(row=0, column=0, padx=(0,10), stick=N+W)
self.erosionSpinBox.grid(row=0, column=1, stick=N+W)
return frame
def createBinarySpinBoxes(self):
frame = Frame(self.menuFrame, width=300)
from_ = 0
to = 255
vcmd = (self.register(self.validateSpinBox),'%d', '%i', '%P', '%s', '%S', '%v', '%V', '%W')
label1 = Label(frame, text="THRESHOLD (0,255)")
self.binaryThreshold = StringVar(value="40")
self.binarySpinBox = Spinbox(frame, textvariable=self.binaryThreshold, width=4, from_=from_, to=to, validate="key", validatecommand=vcmd)
label1.grid(row=0, column=0, padx=(0,10), stick=N+W)
self.binarySpinBox.grid(row=0, column=1, stick=N+W)
return frame
def init_slow_factor(root):
slow_factor_frame = Frame(root)
slow_factor_frame.pack(fill=X)
slow_factor_label = Label(slow_factor_frame, text='Slowing factor [0; 1]:')
slow_factor_label.pack(side='left')
slow_factor = Spinbox(slow_factor_frame,
from_=0,
to=1,
width=4,
increment=0.1)
slow_factor.delete(0, 3)
slow_factor.insert(0, 0.5)
slow_factor.pack(side='right')
return slow_factor_frame, slow_factor_label, slow_factor
def create_entry(self, cadence=None):
if cadence is None:
if len(self.cadences) > 0:
cadence = int(self.cadences[-1].get()) + 10
else:
cadence = 40
cadenceent = Spinbox(from_=10, to=180, width=3, master=self)
cadenceent.delete(0, END)
cadenceent.insert(0, cadence)
self.cadences.append(cadenceent)
def __init__(self, parent=None, **kwargs):
Toplevel.__init__(self, parent)
self.title('Job Parameters')
self.parent = parent
self.main_frame = Frame(self)
self.input_directory_gui = DirectorySelector(self.main_frame, 'Input Directory:')
self.output_directory_gui = DirectorySelector(self.main_frame, 'Output Directory:', get_default=lambda: self.input_directory_gui.get_directory() + '/output/')
self.input_directory_gui.set_notify(self.notify)
self.beginning_year = kwargs['beginning_year'] if 'beginning_year' in kwargs else 1950
self.ending_year = kwargs['ending_year'] if 'ending_year' in kwargs else 2100
self.beginning_year_selector = YearSelector(self.main_frame, text="Beginning Year:", min_value=self.beginning_year, max_value=self.ending_year)
self.ending_year_selector = YearSelector(self.main_frame, text="Ending Year:", min_value=self.beginning_year, max_value=self.ending_year)
self.one_decade_range_var = IntVar()
self.one_decade_range = Checkbutton(self.main_frame, text='Calculate 10 Year Range', variable=self.one_decade_range_var, command=self.on_change)
self.two_decade_range_var = IntVar()
self.two_decade_range = Checkbutton(self.main_frame, text='Calculate 20 Year Range', variable=self.two_decade_range_var, command=self.on_change)
self.custom_range_var = IntVar()
self.custom_range = Checkbutton(self.main_frame, text='Calculate Custom Year Range', variable=self.custom_range_var, command=self.on_change)
self.custom_range_val = StringVar()
self.custom_range_input = Spinbox(self.main_frame, from_=30, to=100, textvariable=self.custom_range_val, command=self.on_change, width=5)
# Initialize widget values
self.beginning_year_selector.set_value(self.beginning_year)
self.beginning_year_selector.set_args(check_other_func=self.ending_year_selector.get_less_than)
self.ending_year_selector.set_value(self.ending_year)
self.ending_year_selector.set_args(check_other_func=self.beginning_year_selector.get_greater_than)
self.one_decade_range_var.set(1)
self.two_decade_range_var.set(1)
self.custom_range_var.set(0)
self.custom_range_input.config(state=Tkinter.DISABLED)
self.button_frame = Frame(self.main_frame)
self.ok_button = Button(self.button_frame, text='OK', command=self.on_submit)
self.cancel_button = Button(self.button_frame, text='Cancel', command=self.on_close)
self.job_id = kwargs['job_id'] if 'job_id' in kwargs else None
self.entry = kwargs['entry'] if 'entry' in kwargs else None
self.grab_set()
self.resizable(width=False, height=False)
def __init__(self, x, y, master=None):
Frame.__init__(self, master)
self.photo = None
self.resolution = (x, y)
#The center of the Canvas is 0, 0. Find the center so
#we can draw the image properly.
self.center = ( x/2, y/2)
#Setup the canvas
self.picture = Canvas(self, width=x, height=y)
#Place the canvas in the Grid.
self.picture.grid(row=0,column=0,columnspan=2)
#Camera check button control.
self.checkButton = Checkbutton(self, text='Camera?',\
command=self.toggleCamera)
#Place it on the grid.
self.checkButton.grid(row=1,column=0)
#Spinbox to set FPS
self.fpsSpin = Spinbox(self, text="FPS", from_=2, to=30,\
command=self.fpsSpinCallback)
self.fpsSpin.grid(row=1, column=1)
#Set framerate
self.fpsSpinCallback()
#To determine if the camera is running
self.capturing = False
qlep.bind("<Enter>", on_enterlep)
qlep.bind("<Leave>", on_leavelep)
#Everything concerning jets:
minnjet_val = IntVar()
minnjet_val.set(0) # initialize integer for min number of jets
maxnjet_val = IntVar()
maxnjet_val.set(9) # initialize integer for max number of jets
labelminjet = Label(frame1, text="Minimum:")
labelmaxjet = Label(frame1, text="Maximum:") #Some labels for the entries
minjet_entry = Spinbox(frame1,
textvariable=minnjet_val,
from_=0,
to=9,
width=4) #Entry for min number of jets
maxjet_entry = Spinbox(frame1,
textvariable=maxnjet_val,
from_=0,
to=9,
width=4) #Entry for max number of jets
btagmin_val = IntVar()
btagmin_val.set(0) #Initialise minimum b-jets
btagmax_val = IntVar()
btagmax_val.set(9) #Initialise maximum b-jets
labelminbjet = Label(frame1, text="Minimum:")
labelmaxbjet = Label(frame1, text="Maximum:") #Labels for b-jets entries
def __init__(self, root, printer, settings, logger, *arg): self.app = root self.printer = printer self.settings = settings self.logger = logger self.app.printing = False self.app.connected = False self.app.paused = False Frame.__init__(self, root, *arg) topBar = Frame(self) topBar.grid(row=1, column=1, columnspan=3, sticky=W) speedBar = Frame(self) speedBar.grid(row=1, column=5, sticky=E) bottomBar = Frame(self) bottomBar.grid(row=2, column=1, columnspan=6, sticky=W+E) self.bPort = Button(topBar, text="Port", width=BWIDTH, command=self.doPort) self.bPort.pack(side=LEFT, padx=2, pady=2) ports = self.scanSerial() self.spPort = Spinbox(topBar, values=ports, state="readonly") self.spPort.pack(side=LEFT, padx=2, pady=2) l = Label(topBar, text=" @ ") l.pack(side=LEFT, padx=2, pady=2) self.spBaud = Spinbox(topBar, values=baudChoices) self.spBaud.pack(side=LEFT, padx=2, pady=2) self.spBaud.delete(0, END) self.spBaud.insert(0, 115200) self.spBaud.config(state="readonly") self.bConnectMode = CM_CONNECT self.bConnect = Button(topBar, text=connectText[CM_CONNECT], width=BWIDTH, command=self.doConnect) self.bConnect.pack(side=LEFT, padx=2, pady=2) if len(ports) == 0: self.bConnect.config(state=DISABLED) else: self.bConnect.config(state=NORMAL) self.bReset = Button(topBar, text="Reset", width=BWIDTH, command=self.doReset, state=DISABLED) self.bReset.pack(side=LEFT, padx=2, pady=2) l = Label(speedBar, text="Speed:", justify=RIGHT) l.grid(row=1, column=1, sticky=E) self._speedJob = None self.currentSpeed = self.app.FeedMultiply self.scSpeed = Scale(speedBar, from_=MINSPEED, to=MAXSPEED, orient=HORIZONTAL, command=self.updateSpeedCommand) self.scSpeed.grid(row=1, column=2) self.scSpeed.set(self.currentSpeed); l = Label(speedBar, text="Fan:", width=10, anchor=E, justify=RIGHT) l.grid(row=1, column=3, sticky=E) self._fanJob = None self.currentFanSpeed = self.app.FanSpeed self.scFan = Scale(speedBar, from_=0, to=255, orient=HORIZONTAL, command=self.updateFanSpeedCommand) self.scFan.grid(row=1, column=4) self.scFan.set(self.currentFanSpeed); if self.settings.speedcommand is not None: self.cbvAssertFan = IntVar() if self.settings.forcefanspeed: self.cbvAssertFan.set(1) else: self.cbvAssertFan.set(0) self.cbAssertFan = Checkbutton(speedBar, text="Force", variable=self.cbvAssertFan, command=self.clickAssertFan) self.cbAssertFan.grid(row=1, column=5) self.bSliceMode = SM_SLICE self.bSlice = Button(bottomBar, text=sliceText[SM_SLICE], width=BWIDTH*2, command=self.doSlice) self.bSlice.pack(side=LEFT, padx=2, pady=2) self.bLoad = Button(bottomBar, text="Load GCode", width=BWIDTH, command=self.doLoad) self.bLoad.pack(side=LEFT, padx=2, pady=2) self.setSliceText() self.bSD = Button(bottomBar, text="SD", width=BWIDTH, command=self.doSD, state=DISABLED) self.bSD.pack(side=LEFT, padx=2, pady=2) self.bPrintMode = PR_PRINT self.bPrint = Button(bottomBar, text=printText[PR_PRINT], width=BWIDTH, command=self.doPrint, state=DISABLED) self.bPrint.pack(side=LEFT, padx=2, pady=2) self.bPauseMode = PM_PAUSE self.bPause = Button(bottomBar, text=pauseText[PM_PAUSE], width=BWIDTH, command=self.doPause, state=DISABLED) self.bPause.pack(side=LEFT, padx=2, pady=2) self.bAbandon = Button(bottomBar, text="Abandon SD Print", width=BWIDTH+8, command=self.doAbandon, state=DISABLED) self.bAbandon.pack(side=LEFT, padx=2, pady=2) self.cbvLiftOnPause = IntVar() if self.settings.liftonpause: self.cbvLiftOnPause.set(1) else: self.cbvLiftOnPause.set(0) self.cbLiftOnPause = Checkbutton(bottomBar, text="Lift Head/Retract on Pause", variable=self.cbvLiftOnPause, command=self.clickLiftOnPause) self.cbLiftOnPause.pack(side=LEFT, padx=2) self.cbvResumeAtPause = IntVar() if self.settings.resumeatpausepoint: self.cbvResumeAtPause.set(1) else: self.cbvResumeAtPause.set(0) self.cbResumeAtPause = Checkbutton(bottomBar, text="Resume print at pause point", variable=self.cbvResumeAtPause, command=self.clickResumeAtPause) self.cbResumeAtPause.pack(side=LEFT, padx=2)
class ToolBar(Frame):
def __init__(self, root, printer, settings, logger, *arg):
self.app = root
self.printer = printer
self.settings = settings
self.logger = logger
self.app.printing = False
self.app.connected = False
self.app.paused = False
Frame.__init__(self, root, *arg)
topBar = Frame(self)
topBar.grid(row=1, column=1, columnspan=3, sticky=W)
speedBar = Frame(self)
speedBar.grid(row=1, column=5, sticky=E)
bottomBar = Frame(self)
bottomBar.grid(row=2, column=1, columnspan=6, sticky=W+E)
self.bPort = Button(topBar, text="Port", width=BWIDTH, command=self.doPort)
self.bPort.pack(side=LEFT, padx=2, pady=2)
ports = self.scanSerial()
self.spPort = Spinbox(topBar, values=ports, state="readonly")
self.spPort.pack(side=LEFT, padx=2, pady=2)
l = Label(topBar, text=" @ ")
l.pack(side=LEFT, padx=2, pady=2)
self.spBaud = Spinbox(topBar, values=baudChoices)
self.spBaud.pack(side=LEFT, padx=2, pady=2)
self.spBaud.delete(0, END)
self.spBaud.insert(0, 115200)
self.spBaud.config(state="readonly")
self.bConnectMode = CM_CONNECT
self.bConnect = Button(topBar, text=connectText[CM_CONNECT], width=BWIDTH, command=self.doConnect)
self.bConnect.pack(side=LEFT, padx=2, pady=2)
if len(ports) == 0:
self.bConnect.config(state=DISABLED)
else:
self.bConnect.config(state=NORMAL)
self.bReset = Button(topBar, text="Reset", width=BWIDTH, command=self.doReset, state=DISABLED)
self.bReset.pack(side=LEFT, padx=2, pady=2)
l = Label(speedBar, text="Speed:", justify=RIGHT)
l.grid(row=1, column=1, sticky=E)
self._speedJob = None
self.currentSpeed = self.app.FeedMultiply
self.scSpeed = Scale(speedBar, from_=MINSPEED, to=MAXSPEED, orient=HORIZONTAL, command=self.updateSpeedCommand)
self.scSpeed.grid(row=1, column=2)
self.scSpeed.set(self.currentSpeed);
l = Label(speedBar, text="Fan:", width=10, anchor=E, justify=RIGHT)
l.grid(row=1, column=3, sticky=E)
self._fanJob = None
self.currentFanSpeed = self.app.FanSpeed
self.scFan = Scale(speedBar, from_=0, to=255, orient=HORIZONTAL, command=self.updateFanSpeedCommand)
self.scFan.grid(row=1, column=4)
self.scFan.set(self.currentFanSpeed);
if self.settings.speedcommand is not None:
self.cbvAssertFan = IntVar()
if self.settings.forcefanspeed:
self.cbvAssertFan.set(1)
else:
self.cbvAssertFan.set(0)
self.cbAssertFan = Checkbutton(speedBar, text="Force", variable=self.cbvAssertFan,
command=self.clickAssertFan)
self.cbAssertFan.grid(row=1, column=5)
self.bSliceMode = SM_SLICE
self.bSlice = Button(bottomBar, text=sliceText[SM_SLICE], width=BWIDTH*2, command=self.doSlice)
self.bSlice.pack(side=LEFT, padx=2, pady=2)
self.bLoad = Button(bottomBar, text="Load GCode", width=BWIDTH, command=self.doLoad)
self.bLoad.pack(side=LEFT, padx=2, pady=2)
self.setSliceText()
self.bSD = Button(bottomBar, text="SD", width=BWIDTH, command=self.doSD, state=DISABLED)
self.bSD.pack(side=LEFT, padx=2, pady=2)
self.bPrintMode = PR_PRINT
self.bPrint = Button(bottomBar, text=printText[PR_PRINT], width=BWIDTH, command=self.doPrint, state=DISABLED)
self.bPrint.pack(side=LEFT, padx=2, pady=2)
self.bPauseMode = PM_PAUSE
self.bPause = Button(bottomBar, text=pauseText[PM_PAUSE], width=BWIDTH, command=self.doPause, state=DISABLED)
self.bPause.pack(side=LEFT, padx=2, pady=2)
self.bAbandon = Button(bottomBar, text="Abandon SD Print", width=BWIDTH+8, command=self.doAbandon, state=DISABLED)
self.bAbandon.pack(side=LEFT, padx=2, pady=2)
self.cbvLiftOnPause = IntVar()
if self.settings.liftonpause:
self.cbvLiftOnPause.set(1)
else:
self.cbvLiftOnPause.set(0)
self.cbLiftOnPause = Checkbutton(bottomBar, text="Lift Head/Retract on Pause", variable=self.cbvLiftOnPause,
command=self.clickLiftOnPause)
self.cbLiftOnPause.pack(side=LEFT, padx=2)
self.cbvResumeAtPause = IntVar()
if self.settings.resumeatpausepoint:
self.cbvResumeAtPause.set(1)
else:
self.cbvResumeAtPause.set(0)
self.cbResumeAtPause = Checkbutton(bottomBar, text="Resume print at pause point", variable=self.cbvResumeAtPause,
command=self.clickResumeAtPause)
self.cbResumeAtPause.pack(side=LEFT, padx=2)
def clickAssertFan(self):
if self.cbvAssertFan.get() == 1:
self.settings.forcefanspeed = True
self.settings.setModified()
else:
self.settings.forcefanspeed = False
self.settings.setModified()
def clickLiftOnPause(self):
if self.cbvLiftOnPause.get() == 1:
self.settings.liftonpause = True
self.settings.setModified()
else:
self.settings.liftonpause = False
self.settings.setModified()
def clickResumeAtPause(self):
if self.cbvResumeAtPause.get() == 1:
self.settings.resumeatpausepoint = True
self.settings.setModified()
else:
self.settings.resumeatpausepoint = False
self.settings.setModified()
def setSliceText(self):
if self.settings.slicer == SLIC3R:
sl = "slic3r:%s" % self.app.slic3r.getProfile()
else:
sl = "skeinforge:%s" % self.app.skeinforge.getProfile()
sliceText[SM_SLICE] = "Slice (%s)" % sl
if self.bSliceMode == SM_SLICE:
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
lt = len(sliceText[SM_SLICE])+2
if lt < BWIDTH:
lt = BWIDTH
self.bSlice.config(text=sliceText[SM_SLICE], width=lt)
def updateSpeedCommand(self, *arg):
if self._speedJob:
self.app.master.after_cancel(self._speedJob)
self._speedJob = self.app.master.after(500, self.updateSpeed)
def updateSpeed(self, *arg):
v = self.scSpeed.get()
self.setSpeed(v)
def setSpeed(self, v):
if v < MINSPEED or v > MAXSPEED:
self.logger.logMsg("Attempt to change speed outside of allowable range (%d-%d)" % (MINSPEED, MAXSPEED))
elif int(v) != self.currentSpeed:
if self.app.connected:
self.currentSpeed = int(v)
self.logger.logMsg("changing speed percentage to %d%%" % self.currentSpeed)
cmd = "M220 S%d" % self.currentSpeed
self.printer.send_now(cmd)
else:
self.logger.logMsg("Printer is off-line")
self.scSpeed.set(self.currentSpeed)
def updateFanSpeedCommand(self, *arg):
if self._fanJob:
self.app.master.after_cancel(self._fanJob)
self._fanJob = self.app.master.after(500, self.updateFanSpeed)
def updateFanSpeed(self, *arg):
v = self.scFan.get()
self.setFanSpeed(v)
self.app.FanSpeed = v
def forceFanSpeed(self, v):
self.currentFanSpeed = -1
self.setFanSpeed(v)
def setFanSpeed(self, v):
if int(v) != self.currentFanSpeed:
if self.app.connected:
self.currentFanSpeed = int(v)
cmd = "M106 S%d" % self.currentFanSpeed
self.printer.send_now(cmd)
else:
self.logger.logMsg("Printer is off-line")
self.scFan.set(self.currentFanSpeed)
def syncSpeeds(self):
self.currentSpeed = self.app.FeedMultiply
self.scSpeed.set(self.currentSpeed)
self.currentFanSpeed = self.app.FanSpeed
self.scFan.set(self.currentFanSpeed)
def initializeToolbar(self):
self.bReset.config(state=DISABLED)
self.bSliceMode = SM_SLICE
self.bSlice.config(text=sliceText[SM_SLICE])
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
if not self.app.sdprinting and not self.app.sdpaused:
self.bPrintMode = PR_PRINT
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPauseMode = PM_PAUSE
self.bPause.config(text=pauseText[PM_PAUSE], state=DISABLED)
def setSDPrint(self):
self.bPause.config(text=pauseText[PM_PAUSE], state=NORMAL)
self.bPauseMode = PM_PAUSE
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
self.bAbandon.config(state=NORMAL)
def clearSDPrint(self):
self.bPause.config(text=pauseText[PM_PAUSE], state=DISABLED)
self.bPauseMode = PM_PAUSE
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
self.bAbandon.config(state=DISABLED)
self.checkAllowPrint()
def setCancelMode(self):
self.bSliceMode = SM_CANCEL
self.bSlice.config(text=sliceText[SM_CANCEL], width=BWIDTH)
self.bLoad.config(state=DISABLED)
self.app.allowLoadGCodeMenu(False)
self.app.allowSliceMenu(False)
def setLoading(self, flag):
if flag:
self.bLoad.config(state=DISABLED)
self.bSlice.config(state=DISABLED)
self.app.allowLoadGCodeMenu(False)
self.app.allowSliceMenu(False)
else:
self.bLoad.config(state=NORMAL)
self.bSlice.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
self.app.allowSliceMenu(True)
def clearCancelMode(self):
self.bSliceMode = SM_SLICE
lt = len(sliceText[SM_SLICE])+2
if lt < BWIDTH:
lt = BWIDTH
self.bSlice.config(text=sliceText[SM_SLICE], width=lt)
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
self.app.allowSliceMenu(True)
def doConnect(self):
if self.bConnectMode == CM_CONNECT:
port = self.spPort.get()
baud = int(self.spBaud.get())
self.printer.onlinecb = self.onlinecb
try:
self.printer.connect(port, baud)
except SerialException:
self.logger.logMsg("Unable to open printer port %s" % port)
else:
if self.app.printing:
self.logger.logMsg("Please wait until printing has finished or is paused")
else:
self.printer.disconnect()
self.printer.onlinecb = None
self.app.printerConnected(False)
# self.app.connected = False
self.bConnectMode = CM_CONNECT
self.bConnect.config(text=connectText[CM_CONNECT])
self.bReset.config(state=DISABLED)
self.bSD.config(state=DISABLED)
if self.app.paused:
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
self.bPause.config(text=pauseText[PM_PAUSE], state=DISABLED)
self.bPauseMode = PM_PAUSE
self.app.printing = False
self.app.paused = False
def doReset(self):
if tkMessageBox.askyesno("Reset?", "Are you sure you want to reset the printer?", parent=self.app):
self.printer.reset()
self.printer.printing = 0
self.app.printing = False
self.bSlice.config(state=NORMAL)
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
self.app.allowSliceMenu(True)
self.bPrintMode = PR_PRINT
self.bPrint.config(text=printText[PR_PRINT], state=NORMAL)
if self.app.paused:
self.printer.paused = 0
self.bPause.config(text=pauseText[PM_PAUSE], state=DISABLED)
self.bPauseMode = PM_PAUSE
self.app.paused = False
def onlinecb(self):
self.logger.logMsg("Printer is on-line")
self.app.printerConnected(True)
# self.app.connected = True
self.bConnectMode = CM_DISCONNECT
self.bConnect.config(text=connectText[CM_DISCONNECT])
self.bReset.config(state=NORMAL)
self.bSD.config(state=NORMAL)
self.checkAllowPrint()
def checkAllowPrint(self):
if self.app.connected and len(self.app.gcode) != 0 and not self.app.printing and not self.app.sdprinting:
self.bPrint.config(text=printText[PR_PRINT], state=NORMAL)
self.bPrintMode = PR_PRINT
def printComplete(self):
self.app.endTime = time.time()
self.app.elapsedTime = self.app.endTime - self.app.startTime
self.logger.logMsg("Printing completed at %s" % time.strftime('%H:%M:%S', time.localtime()))
self.logger.logMsg("Total elapsed time: %s" % formatElapsed(self.app.elapsedTime))
self.bPrintMode = PR_PRINT
self.bPrint.config(text=printText[PR_PRINT], state=NORMAL)
self.bPauseMode = PM_PAUSE
self.bPause.config(text=pauseText[PM_PAUSE], state=DISABLED)
self.app.printing = False
self.bSlice.config(state=NORMAL)
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
self.app.allowSliceMenu(True)
self.app.paused = False
self.app.gc.updatePrintProgress(0)
self.app.closeAllReports()
if self.settings.endprintmacro is not None:
self.app.doMacro(name=self.settings.endprintmacro, silent=True)
def doPause(self):
if self.bPauseMode == PM_PAUSE:
if self.app.printing:
self.app.paused = True
self.printer.pause()
elif self.app.sdprinting:
self.app.sdpaused = True
self.printer.send_now("M25")
self.app.sdprinting = False
self.bPause.config(text=pauseText[PM_RESUME])
self.bPauseMode = PM_RESUME
self.bPrint.config(text=printText[PR_RESTART], state=NORMAL)
self.bPrintMode = PR_RESTART
else:
if self.app.sdpaused:
self.printer.send_now("M24")
self.app.sdpaused = False
self.app.sdprinting = True
self.bPause.config(text=pauseText[PM_PAUSE])
self.bPauseMode = PM_PAUSE
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
else:
self.hitPrint = False
if self.settings.resumeatpausepoint:
self.printer.send_now("G1 X%s Y%s F%s" % (self.app.pausePoint[XAxis], self.app.pausePoint[YAxis], self.settings.xyfeed))
self.printer.send_now("G1 Z%s F%s" % (self.app.pausePoint[ZAxis], self.settings.zfeed))
self.printer.send_now("G92 E%s" % self.app.pausePoint[EAxis])
self.printer.send_now("G1 F%s" % self.settings.xyfeed)
self.printer.startcb = self.startcb
self.printer.resume()
def doAbandon(self):
self.printer.send_now("M25")
self.app.sdpaused = False
self.app.sdprinting = False
self.clearSDPrint()
def doSlice(self):
if self.bSliceMode == SM_SLICE:
self.bLoad.config(state=DISABLED)
self.app.allowLoadGCodeMenu(False)
self.app.openSTLFile()
else:
self.app.slicerCancel = True
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
def doLoad(self):
self.app.openGCodeFile()
def doPrint(self):
if self.app.sdpaused:
self.printer.send_now("M26 S0")
self.printer.send_now("M24")
self.app.sdpaused = False
self.app.sdprinting = True
self.bPause.config(text=pauseText[PM_PAUSE])
self.bPauseMode = PM_PAUSE
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
else:
if len(self.app.gcode) == 0:
self.logger.logMsg("Nothing to print")
else:
#if not self.app.paused:
self.app.gc.updatePrintProgress(0, restart=True)
self.bPauseMode = PM_PAUSE
self.bPause.config(text=pauseText[PM_PAUSE], state=NORMAL)
self.hitPrint = True
self.printer.startcb = self.startcb
self.printer.startprint(self.app.gcode)
def startcb(self):
self.printer.startcb = None
if not self.app.paused:
self.app.startTime = time.time()
self.logger.logMsg("Printing Started at %s" % time.strftime('%H:%M:%S', time.localtime(self.app.startTime)))
self.app.printing = True
self.bSlice.config(state=DISABLED)
self.bLoad.config(state=DISABLED)
self.app.allowLoadGCodeMenu(False)
self.app.allowSliceMenu(False)
self.bPrint.config(text=printText[PR_RESTART], state=DISABLED)
self.bPrintMode = PR_RESTART
self.printer.endcb = self.endcb
else:
if self.hitPrint:
self.app.startTime = time.time()
self.logger.logMsg("Printing restarted at %s" % time.strftime('%H:%M:%S', time.localtime()))
else:
self.logger.logMsg("Printing resumed at %s" % time.strftime('%H:%M:%S', time.localtime()))
self.bPause.config(text=pauseText[PM_PAUSE])
self.bPauseMode = PM_PAUSE
self.app.printing = True
self.bSlice.config(state=DISABLED)
self.bLoad.config(state=DISABLED)
self.app.allowLoadGCodeMenu(False)
self.app.allowSliceMenu(False)
self.app.paused = False
self.bPrint.config(state=DISABLED)
self.printer.endcb = self.endcb
def endcb(self):
self.printer.endcb = None
if not self.app.paused:
self.printComplete()
if self.app.sduploading:
self.app.sduploading = False
self.printer.send_now("M29")
else:
self.app.event_generate(MWM_REQUESTPOSITIONREPORT)
# record the current printer position and how many intervals were willing to wait fo the response
self.maxWait114 = MAXWAIT114;
self.waitPos = self.printer.queueindex
self.check114Response()
def check114Response(self) :
# tick off 1 interval, and make sure we haven't either received the report or we've waited max intervals
self.maxWait114 -= 1
if self.app.m114count == 0 or self.maxWait114 <= 0:
# one way or the other we're done waiting here
if self.maxWait114 <= 0:
self.app.m114count = 0
self.logger.logMsg("Location report not received - proceeding")
self.app.pausePoint[XAxis] = self.app.location[XAxis]
self.app.pausePoint[YAxis] = self.app.location[YAxis]
self.app.pausePoint[ZAxis] = self.app.location[ZAxis]
self.app.pausePoint[EAxis] = self.app.location[EAxis]
self.logger.logMsg("Pause location: X:%f Y:%f Z:%f E:%f" %
(self.app.pausePoint[XAxis], self.app.pausePoint[YAxis], self.app.pausePoint[ZAxis], self.app.pausePoint[EAxis]))
if self.settings.liftonpause:
self.printer.send_now("G1 E%s F%s" % (self.app.pausePoint[EAxis]-2, self.settings.efeed))
self.printer.send_now("G1 Z%s F%s" % (self.app.pausePoint[ZAxis]+10, self.settings.zfeed))
self.bPause.config(text=pauseText[PM_RESUME])
self.bPauseMode = PM_RESUME
self.app.printing = False
self.bSlice.config(state=NORMAL)
self.bLoad.config(state=NORMAL)
self.app.allowLoadGCodeMenu(True)
self.app.allowSliceMenu(True)
if self.app.sduploading:
self.bPrint.config(text=printText[PR_PRINT], state=DISABLED)
self.bPrintMode = PR_PRINT
else:
self.bPrint.config(text=printText[PR_RESTART], state=NORMAL)
self.bPrintMode = PR_RESTART
else:
# we still are waiting for the report, but reset everything if the printer is still moving
if self.waitPos != self.printer.queueindex:
self.waitPos = self.printer.queueindex
self.maxWait114 = MAXWAIT114
self.app.master.after(500, self.check114Response)
def doPort(self):
l = self.scanSerial()
self.spPort.config(values=l)
if len(l) == 0:
self.bConnect.config(state=DISABLED)
else:
self.bConnect.config(state=NORMAL)
def scanSerial(self):
"""scan for available ports. return a list of device names."""
baselist=[]
if os.name=="nt":
try:
key=_winreg.OpenKey(_winreg.HKEY_LOCAL_MACHINE,"HARDWARE\\DEVICEMAP\\SERIALCOMM")
i=0
while(1):
baselist+=[_winreg.EnumValue(key,i)[1]]
i+=1
except:
pass
return baselist+glob.glob('/dev/ttyUSB*') + glob.glob('/dev/ttyACM*') +glob.glob("/dev/tty.*")+glob.glob("/dev/cu.*")+glob.glob("/dev/rfcomm*")
def doSD(self):
self.app.doSD()
def initUI(self):
self.parent.title("LINEARITY TEST FOR PMT BASES")
self.pack(fill=BOTH, expand=True)
self.columnconfigure(0, weight=1)
#self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
# self.graph_cb = BooleanVar()
self.init_point = IntVar()
self.base_path = StringVar()
self.end_point = IntVar()
self.step = IntVar()
self.n_meas = IntVar()
self.inc_point = IntVar()
self.coef = DoubleVar()
self.noise = DoubleVar()
self.thr_sigma = DoubleVar()
self.SPE_DAQ = DoubleVar()
search = Image.open("next_logo.jpg")
search_temp = search.resize((170, 200), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0, column=0,
columnspan=10, rowspan=10, sticky=E+W+S+N)
#Text Box
self.base_path.set("F:/DATOS_DAC/2052/pmt_0_trace_evt_")
e1 = Entry(self, textvariable=self.base_path, width=40)
e1.grid(row=1,column=2, sticky=W, columnspan=5, pady=5)
e1_label = Label(self, text="DataSet path (including name file)")
e1_label.grid(row=0,column=2,sticky=W, columnspan=5, pady=5)
#Spin Boxes
self.n_meas.set("20")
sb1 = Spinbox(self, from_=1, to=1000,
width=6, textvariable=self.n_meas)
sb1.grid(row=3,column=3, sticky=W)
sb1_label = Label(self, text="Measurements")
sb1_label.grid(row=2,column=3, padx=0, sticky=W)
self.step.set("10")
sb2 = Spinbox(self, from_=10, to=200,
width=6, textvariable=self.step)
sb2.grid(row=3,column=4, sticky=W)
sb2_label = Label(self, text="Pulse Width Step")
sb2_label.grid(row=2,column=4, padx=0, sticky=W)
# INTEGRATION LIMITS
Integration_label = Label(self, text="INTEGRATION LIMITS",
font = "Verdana 12 bold")
Integration_label.grid(row=4,column=3,
padx=5,
columnspan = 3, pady=10)
self.init_point.set("30")
sb3 = Spinbox(self, from_=1, to=10000,
width=6, textvariable=self.init_point)
sb3.grid(row=7,column=3, sticky=W)
sb3_label = Label(self, text="Start (usec)")
sb3_label.grid(row=6,column=3, padx=0, sticky=W)
self.end_point.set("160")
sb4 = Spinbox(self, from_=1, to=10000,
width=6, textvariable=self.end_point)
sb4.grid(row=7,column=4, sticky=W)
sb4_label = Label(self, text="End (usec)")
sb4_label.grid(row=6,column=4, padx=0, sticky=W)
# PARAMETERS
Integration_label = Label(self, text="PARAMETERS",
font = "Verdana 12 bold")
Integration_label.grid(row=8,column=3,
padx=5,
columnspan = 3, pady=10)
self.inc_point.set("3")
sb5 = Spinbox(self, from_=1, to=100,
width=6, textvariable=self.inc_point)
sb5.grid(row=11,column=3, sticky=W)
sb5_label = Label(self, text="First point")
sb5_label.grid(row=10,column=3, padx=0, sticky=W)
self.coef.set("1.636E-3")
e6 = Entry(self, width=10, textvariable=self.coef)
e6.grid(row=11,column=4, sticky=W)
e6_label = Label(self, text="DBLR Coef")
e6_label.grid(row=10,column=4, sticky=W)
self.noise.set("0.75")
e7 = Entry(self, width=10, textvariable=self.noise)
e7.grid(row=11,column=5, sticky=W)
e7_label = Label(self, text="Noise (LSB)")
e7_label.grid(row=10,column=5, sticky=W)
self.thr_sigma.set("40")
e8 = Entry(self, width=10, textvariable=self.thr_sigma)
e8.grid(row=13,column=3, sticky=W)
e8_label = Label(self, text="Threshold")
e8_label.grid(row=12,column=3, sticky=W)
self.SPE_DAQ.set("20.5")
e9 = Entry(self, width=10, textvariable=self.SPE_DAQ)
e9.grid(row=13,column=4, sticky=W)
e9_label = Label(self, text="SPE (LSB)")
e9_label.grid(row=12,column=4, sticky=W)
# #Check buttons
# cb1 = Checkbutton(self, text="MultiGraph Output", variable=self.graph_cb )
# cb1.select()
# cb1.grid(row=7,column=6, sticky=W)
# Main buttons
obtn = Button(self, text="GO!!", command=self.linearity_f)
obtn.grid(row=14, column=4, sticky=E, pady=10)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=14, column=5, sticky=E, pady=10)
hbtn = Button(self, text="Help")
hbtn.grid(row=14, column=0, sticky=W, pady=10)
class PeakFinder:
def __init__(self, master):
self.master = master
master.title(u"Weiterreißwiderstand")
self.big_font = tkFont.Font(family='Helvetica',
size=36, weight='bold')
self.normal_font = tkFont.Font(family='Helvetica',
size=20, weight='normal')
self.X = None
self.Y = None
self.maxima = None
self.maxima_x = None
self.number_max = 0
self.number_max_string = StringVar()
self.max_max = 0.0
self.max_max_string = StringVar()
self.min_max = 0.0
self.min_max_string = StringVar()
self.median = 0.0
self.median_string = StringVar()
self.w_string = StringVar()
self.distance_string = StringVar()
self.method_string = StringVar()
self.sample_file = ''
self.project_file = ''
self.w = 0.0
self.distance = 0.0
#########################################################################
'''
Optionen für Dateidialoge
'''
self.file_opt = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Messung importieren'
self.file_opt2 = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Neues Projekt erstellen.'
self.file_opt3 = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Vorhandenes Projekt öffnen.'
#####################################################################################################
'''
GUI
'''
'''
MenueLeiste
'''
###############################################################################################
self.menubar = Menu(master)
# create a pulldown menu, and add it to the menu bar
self.filemenu = Menu(self.menubar, tearoff=0)
self.filemenu.add_command(label="Neu", command=self.new_file, font = self.normal_font)
self.filemenu.add_command(label=u"Öffnen...", command=self.open_file, font = self.normal_font)
self.filemenu.add_separator()
self.filemenu.add_command(label="Messung importieren", command=self.get_filepath, font = self.normal_font)
self.filemenu.add_separator()
self.filemenu.add_command(label="Beenden", command=root.quit, font = self.normal_font)
self.menubar.add_cascade(label="Datei", menu=self.filemenu, font = self.normal_font)
self.helpmenu = Menu(self.menubar, tearoff=0)
self.helpmenu.add_command(label="Hilfe", command=self.help, font = self.normal_font)
self.helpmenu.add_command(label=u"Über", command=self.info, font = self.normal_font)
self.menubar.add_cascade(label="Hilfe", menu=self.helpmenu, font = self.normal_font)
master.config(menu=self.menubar)
##############################################################################################
'''
Parameter
'''
self.option_label = ttk.Label(master, text = "Parameter", font = self.big_font)
self.option_label.grid(row = 0, rowspan = 2, columnspan = 4, sticky=W)
self.delta_x_label = ttk.Label(master, text = "Delta X", font = self.normal_font)
self.delta_x_label.grid(row = 3, sticky=W)
self.delta_x_spinbox = Spinbox(master, from_=10, to=500, increment = 10, font = self.normal_font, width = 4, command = self.plot)
self.delta_x_spinbox.grid(row = 3, column = 1)
self.delta_y_label = ttk.Label(master, text = "Delta Y", font = self.normal_font)
self.delta_y_label.grid(row = 4, column = 0, sticky=W)
self.delta_y_spinbox = Spinbox(master, from_=0, to=2, increment = 0.05, font = self.normal_font, width = 4, command = self.plot)
self.delta_y_spinbox.grid(row = 4, column = 1)
# self.plot_button = Button(master, text = "Plotten", font = self.normal_font, command = self.plot, width = 10)
# self.plot_button.grid(row = 3, column = 2, columnspan = 1)
self.sample_thickness_label = ttk.Label(master, text = "Probendicke [mm]", font = self.normal_font)
self.sample_thickness_label.grid(row = 5, column = 0, sticky=W)
self.sample_thickness_entry = ttk.Entry(master, font = self.normal_font, width = 5)
self.sample_thickness_entry.grid(row = 5, column = 1)
self.calculate_button = Button(master, text = "Berechnen", font = self.normal_font, command = self.calculate, width = 10)
self.calculate_button.grid(row = 6, column = 1, columnspan = 1)
##########################################################################################################
'''
Speichern
'''
self.save_label = ttk.Label(master, text = "Auswertung Speichern", font = self.big_font)
self.save_label.grid(row = 7, rowspan = 2, columnspan = 4, sticky=W)
self.sample_name_label = ttk.Label(master, text = "Probenname", font = self.normal_font)
self.sample_name_label.grid(row = 9, sticky=W)
self.sample_name_entry = ttk.Entry(master, font = self.normal_font)
self.sample_name_entry.grid(row = 9, column = 1, columnspan = 3)
self.comment_label = ttk.Label(master, text = "Kommentar", font = self.normal_font)
self.comment_label.grid(row = 10, sticky=W)
self.comment_entry = ttk.Entry(master, font = self.normal_font)
self.comment_entry.grid(row = 10, column = 1, columnspan = 3)
self.save_button = Button(master, text = "Speichern", font = self.normal_font, command = self.save, width = 10)
self.save_button.grid(row = 12, column = 1, columnspan = 2, sticky=W)
##############################################################################################################
'''
Analyse
'''
self.number_max_label = ttk.Label(master, text = "Anzahl Maxima:", font = self.normal_font)
self.number_max_label.grid(row = 9, column = 6, sticky=W)
self.number_max_int_label = ttk.Label(master, textvariable = self.number_max_string, font = self.normal_font)
self.number_max_int_label.grid(row = 9, column = 7)
self.max_max_label = ttk.Label(master, text = "Median [N]:", font = self.normal_font)
self.max_max_label.grid(row = 10, column = 6, sticky=W)
self.max_max_int_label = ttk.Label(master, textvariable = self.median_string, font = self.normal_font)
self.max_max_int_label.grid(row = 10, column = 7)
self.min_max_label = ttk.Label(master, text = u"Weiterreißwiderstand [N/mm]:", font = self.normal_font)
self.min_max_label.grid(row = 11, column = 6, sticky=W)
self.min_max_int_label = ttk.Label(master, textvariable = self.w_string, font = self.normal_font)
self.min_max_int_label.grid(row = 11, column = 7)
self.min_max_label = ttk.Label(master, text = u"Spannweite [mm]:", font = self.normal_font)
self.min_max_label.grid(row = 12, column = 6, sticky=W)
self.min_max_int_label = ttk.Label(master, textvariable = self.distance_string, font = self.normal_font)
self.min_max_int_label.grid(row = 12, column = 7)
self.method_label = ttk.Label(master, text="Methode:", font = self.normal_font)
self.method_label.grid(row = 13, column = 6, sticky=W)
self.method_method_label = ttk.Label(master, textvariable = self.method_string, font = self.normal_font)
self.method_method_label.grid(row = 13, column = 7)
##########################################################################################################
'''
Canvas
'''
# Create a canvas
self.w, self.h = 800, 500
self.canvas = Canvas(master, width=self.w, height=self.h)
self.canvas.grid(row = 0, column = 5, columnspan = 5, rowspan = 9)
'''
Funktionen
'''
def plot(self):
try:
#Maxima finden
self._max, self._min = self.peakdetect(self.Y, self.X, float(self.delta_x_spinbox.get()), float(self.delta_y_spinbox.get()))
#Maxima in Array schreiben
self.xm = [p[0] for p in self._max]
self.ym = [p[1] for p in self._max]
#Maxima verarbeiten
self.maxima = self.ym
self.maxima_x = self.xm
self.number_max = len(self._max)
self.number_max_string.set(str(self.number_max))
self.max_max = max(self.ym)
self.max_max_string.set(str(self.max_max))
self.min_max = min(self.ym)
self.min_max_string.set(str(self.min_max))
#Graph Plotten
self.fig = plt.Figure(figsize=(8, 5), dpi=100)
self.ax = self.fig.add_subplot(111)
self.ax.plot(self.X, self.Y)
self.ax.plot(self.xm, self.ym, 'ro', markersize = 10)
#self.ax.axvline(x=10, ymin = 0, ymax = 1, linewidth = 2, color = 'g')
self.ax.axis('auto')
self.ax.set_xlabel('Weg [mm]')
self.ax.set_ylabel('Kraft [N]')
self.fig_photo = self.draw_figure(self.canvas, self.fig, loc=(0, 0))
#Methode Anzeigen
if 1 < self.number_max <= 5 :
self.method_string.set('Median')
elif self.number_max < 2:
self.method_string.set('Maximum')
else:
self.method_string.set('80% Median')
except:
tkMessageBox.showwarning('Fehler bei der Berechnung!', 'Bitte Eingaben prüfen.')
def calculate(self):
if self.sample_thickness_entry.get() == '':
tkMessageBox.showwarning('Keine Probendicke eingetragen!', 'Bitte Probendicke zur Berechnung eintragen.')
else:
if self.number_max <= 5:
self.median_calculation()
else:
self.percent_calculation()
def percent_calculation(self):
#Berechnung 80 Prozent von #Maxima
n = int(round(self.number_max*0.8))
delta = self.number_max - n
#Entfernen der ersten und zweiten 10 Prozent
del self.maxima[0:int(round(delta/2))]
del self.maxima[len(self.maxima)-int(round(delta-int(round(delta/2)))):len(self.maxima)]
del self.maxima_x[0:int(round(delta/2))]
del self.maxima_x[len(self.maxima_x)-int(round(delta-int(round(delta/2)))):len(self.maxima_x)]
#Berechnung des Weiterreisswiderstands
try:
d = float(self.sample_thickness_entry.get()) #Auslesen der Probendicke
self.median = np.median(self.maxima) #Berechnung des Medians
self.w = self.median/d
self.median_string.set(str(self.median))
self.w_string.set(str(self.w))
#Berechnung der Spannweite
self.distance = self.maxima_x[len(self.maxima_x)-1]-self.maxima_x[0]
self.distance_string.set(str(self.distance))
except:
tkMessageBox.showwarning(u'Probendicke hat falsche Formatierung!', u'Bitte Probendicke in der Form Z.ZZ eingeben (Z=Zahl).')
def median_calculation(self):
#Berechnung des Weiterreisswiderstands
try:
d = float(self.sample_thickness_entry.get()) #Auslesen der Probendicke
self.median = np.median(self.maxima) #Berechnung des Medians
self.w = self.median/d
self.median_string.set(str(self.median))
self.w_string.set(str(self.w))
#Berechnung der Spannweite
self.distance = self.maxima_x[len(self.maxima_x)-1]-self.maxima_x[0]
self.distance_string.set(str(self.distance))
except:
tkMessageBox.showwarning(u'Probendicke hat falsche Formatierung!', u'Bitte Probendicke in der Form Z.ZZ eingeben (Z=Zahl).')
def save(self):
#Speichern der Auswertung im Projekt
if self.project_file != '' and self.sample_name_entry.get() != '':
maxima_string = ''
for maximum in self.maxima:
maxima_string += str(maximum)+'\t'
print(maxima_string)
self.project_file_write = open(self.project_file, 'a')
self.project_file_write.write('\n'+self.sample_name_entry.get()+'\t'+str(self.number_max)+'\t'+str(self.median)+'\t'+self.sample_thickness_entry.get()+'\t'+str(self.w)+'\t'+str(self.distance)+'\t'+self.method_string.get()+'\t'+self.comment_entry.get()+'\t'+maxima_string)
self.project_file_write.close()
elif self.project_file == '':
tkMessageBox.showwarning(u'Keine Datei zum Speichern geöffnet!', u'Bitte Datei zum Speichern öffnen oder neue Datei erstellen.')
elif self.sample_name_entry.get() == '':
tkMessageBox.showwarning(u'Keine Probenname eingetragen!', u'Bitte Probenname eintragen.')
def new_file(self):
#Neues Projekt erstellen
self.project_file = tkFileDialog.asksaveasfilename(**self.file_opt2)
self.project_file_write = open(self.project_file, 'a')
self.project_file_write.write('Probenname\tNMax\tMedian\tProbendicke\tWeiterreisswiderstand\tSpannweite\tMethode\tKommentar\tMaxima(80%)')
self.project_file_write.close()
def open_file(self):
#Bestehendes Projekt öffnen
self.project_file = tkFileDialog.askopenfilename(**self.file_opt3)
def get_filepath(self):
#Dateipfad von Messung erfragen
self.sample_file = tkFileDialog.askopenfilename(**self.file_opt)
self.import_data(self.sample_file)
def import_data(self, loadfile):
#Messung importieren
self.X, self.Y = np.loadtxt(loadfile, usecols = (1,0), unpack = True)
self.plot()
def help(self):
#Hilfeseite zeigen
top = Toplevel()
top.title("Hilfe")
label1 = ttk.Label(top, text = u"Projekt öffnen/erstellen", font=self.normal_font)
label1.pack()
msg1 = Message(top, text=u'Über Datei -> Neu muss zu Beginn eine .txt-Datei erstellt werden. In dieser werden die Ergebnisse der Auswertung gespeichert.\n\nAlternativ kann über Datei -> Öffnen... ein bereits existierendes Projekt mit den neuen Ergebnissen erweitert werden. \n\n')
msg1.pack()
label2 = ttk.Label(top, text = u"Messung importieren und auswerten", font=self.normal_font)
label2.pack()
msg2 = Message(top, text=u'Zunächst muss über Datei -> Messung importieren die gewünschte Messung importiert werden.\n\nAnschließend werden Delta X und Delta Y so eingestellt, dass nur die gewünschten Maxima (rote Punkte im Graphen) vom Algorithmus erkannt werden.\n\nZur Berechnung des Weiterreißwiderstandes wird die Probendicke benötigt. Diese muss im entsprechenden Fenster eingetragen werden (Trennung durch . nicht durch , Bsp: 1.75).\n\nÜber die Schaltfläche Berechnen werden die gewünschten Werte berechnet.\n\nNachdem der Probenname und optional ein Kommentar zur Messung in die entsprechenden Fenster eingetragen wurden, lässt sich die Auswertung im zuvor gewählten Projekt abspeichern.')
msg2.pack()
button = Button(top, text="Verbergen", command=top.destroy)
button.pack()
def info(self):
#Infoseite zeigen
top = Toplevel()
top.title(u"Über dieses Programm...")
msg = Message(top, text=u'Dieses Programm dient zur Auswertung von Messungen für die Bestimmung des Weiterreißwiderstands nach DIN ISO 6133:2004-05\n\nZur Detektion der Maxima dient ein Algorithmus aus MATLAB (http://billauer.co.il/peakdet.html) verwendet, welcher nach Python übersetzt wurden.\n\nDas Programm entscheidet je nach Anzahl der Maxima selbst, welche Vorgabe für die Auswertung zu verwenden ist.\n\n\n\nErstellt von Lukas Scheffler')
msg.pack()
button = Button(top, text="Verbergen", command=top.destroy)
button.pack()
def draw_figure(self, canvas, figure, loc=(0, 0)):
'''
Draw a matplotlib figure onto a Tk canvas
loc: location of top-left corner of figure on canvas in pixels.
Inspired by matplotlib source: lib/matplotlib/backends/backend_tkagg.py
'''
figure_canvas_agg = FigureCanvasAgg(figure)
figure_canvas_agg.draw()
figure_x, figure_y, figure_w, figure_h = figure.bbox.bounds
figure_w, figure_h = int(figure_w), int(figure_h)
photo = PhotoImage(master=canvas, width=figure_w, height=figure_h)
# Position: convert from top-left anchor to center anchor
canvas.create_image(loc[0] + figure_w/2, loc[1] + figure_h/2, image=photo)
# Unfortunatly, there's no accessor for the pointer to the native renderer
tkagg.blit(photo, figure_canvas_agg.get_renderer()._renderer, colormode=2)
# Return a handle which contains a reference to the photo object
# which must be kept live or else the picture disappears
return photo
def _datacheck_peakdetect(self, x_axis, y_axis):
if x_axis is None:
x_axis = range(len(y_axis))
if len(y_axis) != len(x_axis):
raise (ValueError,
'Input vectors y_axis and x_axis must have same length')
#needs to be a numpy array
y_axis = np.array(y_axis)
x_axis = np.array(x_axis)
return x_axis, y_axis
def peakdetect(self, y_axis, x_axis = None, lookahead = 300, delta=0):
"""
Converted from/based on a MATLAB script at:
http://billauer.co.il/peakdet.html
function for detecting local maximas and minmias in a signal.
Discovers peaks by searching for values which are surrounded by lower
or larger values for maximas and minimas respectively
keyword arguments:
y_axis -- A list containg the signal over which to find peaks
x_axis -- (optional) A x-axis whose values correspond to the y_axis list
and is used in the return to specify the postion of the peaks. If
omitted an index of the y_axis is used. (default: None)
lookahead -- (optional) distance to look ahead from a peak candidate to
determine if it is the actual peak (default: 200)
'(sample / period) / f' where '4 >= f >= 1.25' might be a good value
delta -- (optional) this specifies a minimum difference between a peak and
the following points, before a peak may be considered a peak. Useful
to hinder the function from picking up false peaks towards to end of
the signal. To work well delta should be set to delta >= RMSnoise * 5.
(default: 0)
delta function causes a 20% decrease in speed, when omitted
Correctly used it can double the speed of the function
return -- two lists [max_peaks, min_peaks] containing the positive and
negative peaks respectively. Each cell of the lists contains a tupple
of: (position, peak_value)
to get the average peak value do: np.mean(max_peaks, 0)[1] on the
results to unpack one of the lists into x, y coordinates do:
x, y = zip(*tab)
"""
max_peaks = []
min_peaks = []
dump = [] #Used to pop the first hit which almost always is false
# check input data
x_axis, y_axis = self._datacheck_peakdetect(x_axis, y_axis)
# store data length for later use
length = len(y_axis)
#perform some checks
if lookahead < 1:
raise ValueError, "Lookahead must be '1' or above in value"
if not (np.isscalar(delta) and delta >= 0):
raise ValueError, "delta must be a positive number"
#maxima and minima candidates are temporarily stored in
#mx and mn respectively
mn, mx = np.Inf, -np.Inf
#Only detect peak if there is 'lookahead' amount of points after it
for index, (x, y) in enumerate(zip(x_axis[:-lookahead],
y_axis[:-lookahead])):
if y > mx:
mx = y
mxpos = x
if y < mn:
mn = y
mnpos = x
####look for max####
if y < mx-delta and mx != np.Inf:
#Maxima peak candidate found
#look ahead in signal to ensure that this is a peak and not jitter
if y_axis[index:index+lookahead].max() < mx:
max_peaks.append([mxpos, mx])
dump.append(True)
#set algorithm to only find minima now
mx = np.Inf
mn = np.Inf
if index+lookahead >= length:
#end is within lookahead no more peaks can be found
break
continue
#else: #slows shit down this does
# mx = ahead
# mxpos = x_axis[np.where(y_axis[index:index+lookahead]==mx)]
####look for min####
if y > mn+delta and mn != -np.Inf:
#Minima peak candidate found
#look ahead in signal to ensure that this is a peak and not jitter
if y_axis[index:index+lookahead].min() > mn:
min_peaks.append([mnpos, mn])
dump.append(False)
#set algorithm to only find maxima now
mn = -np.Inf
mx = -np.Inf
if index+lookahead >= length:
#end is within lookahead no more peaks can be found
break
#else: #slows shit down this does
# mn = ahead
# mnpos = x_axis[np.where(y_axis[index:index+lookahead]==mn)]
#Remove the false hit on the first value of the y_axis
try:
if dump[0]:
max_peaks.pop(0)
else:
min_peaks.pop(0)
del dump
except IndexError:
#no peaks were found, should the function return empty lists?
pass
return [max_peaks, min_peaks]
class ConstraintsWindow:
constr_types = ['Fix', 'Equality', 'Concentric']
def __init__(self, master=None):
self.master = master
self.nspheres = 0
master.title('Constraints')
self.padWE = dict(padx='0.5mm', pady='0.5mm')
self.frame = ttk.Frame(self.master)
self.create_widgets()
self.configure_widgets()
self.frame.grid(row=0, column=0)
# binds
self.count.trace('w', self.change_count)
self.master.bind('<Configure>', self.configure_widgets)
self.master.protocol('WM_DELETE_WINDOW', self.hide_window)
self.master.bind('<Destroy>', self.hide_window)
def create_widgets(self):
self.count = StringVar()
self.count.set('0')
self.lbCount = ttk.Label(self.frame, text='Number of constraints:')
self.sbCount = Spinbox(self.frame,
from_=0,
to=1000,
textvariable=self.count,
width=10)
self.lbType = ttk.Label(self.frame, text='Type')
self.lbPrm1 = ttk.Label(self.frame, text='Parameter#1')
self.lbPrm2 = ttk.Label(self.frame, text='Parameter#2')
self.cbTypes = []
self.cbPrm1s = []
self.cbPrm2s = []
self.btOk = ttk.Button(self.frame, text='Ok', command=self.hide_window)
self.btHelp = ttk.Button(self.frame,
text='Help',
command=self.show_help)
def configure_widgets(self, event=None):
self.lbCount.grid(row=0, column=0, columnspan=2, **self.padWE)
self.sbCount.grid(row=0, column=2, columnspan=2, **self.padWE)
self.lbType.grid(row=1, column=0, **self.padWE)
self.lbPrm1.grid(row=1, column=1, **self.padWE)
self.lbPrm2.grid(row=1, column=2, **self.padWE)
n = int(self.count.get())
for i in xrange(n):
self.cbTypes[i].grid(row=2 + i, column=0, **self.padWE)
self.cbPrm1s[i].grid(row=2 + i, column=1, **self.padWE)
self.cbPrm2s[i].grid(row=2 + i, column=2, **self.padWE)
self.btOk.pack_forget()
self.btOk.grid(row=3 + n, column=0, **self.padWE)
self.btHelp.grid(row=3 + n, column=2, **self.padWE)
def hide_window(self, event=None):
if (event is not None) and (event.widget != self.master):
return # skip events from destruction of widgets
self.master.withdraw()
def show_window(self, nspheres):
assert nspheres >= 0
self.nspheres = nspheres
print(' Number of spheres passed to Constrains window: %i' % nspheres)
self.master.deiconify()
def change_count(self, var, blank, mode):
n = int(self.count.get())
while len(self.cbTypes) > n:
self.cbTypes[-1].destroy()
self.cbTypes.pop()
self.cbPrm1s[-1].destroy()
self.cbPrm1s.pop()
self.cbPrm2s[-1].destroy()
self.cbPrm2s.pop()
while len(self.cbTypes) < n:
i = len(self.cbTypes)
self.cbTypes.append(ttk.Combobox(self.frame, width=10))
self.cbTypes[i].configure(values=self.constr_types)
self.cbTypes[i].bind('<<ComboboxSelected>>',
lambda event: self.select_type(event, i))
self.cbPrm1s.append(ttk.Combobox(self.frame, width=10))
self.cbPrm2s.append(ttk.Combobox(self.frame, width=10))
print(self.cbTypes)
self.configure_widgets()
def select_type(self, event, irow):
stype = self.cbTypes[irow].get()
prms = ['scale', 'bkg0', 'bkg1', 'bkg2']
for i in xrange(self.nspheres):
prms.append('a%i' % i)
prms.append('x%i' % i)
prms.append('y%i' % i)
prms.append('z%i' % i)
if stype == 'Fix':
self.cbPrm1s[irow].configure(values=prms)
self.cbPrm2s[irow].configure(values=[])
elif stype == 'Equality':
self.cbPrm1s[irow].configure(values=prms)
self.cbPrm2s[irow].configure(values=prms)
elif stype == 'Concentric':
prms = ['s%i' % i for i in xrange(self.nspheres)]
self.cbPrm1s[irow].configure(values=prms)
self.cbPrm2s[irow].configure(values=prms)
else:
raise Exception('Unknonw Constraint: "%s"' % stype)
self.cbPrm1s[irow].delete(0, 'end')
self.cbPrm2s[irow].delete(0, 'end')
def get_constraints_list(self):
n = int(self.count.get())
result = []
for i in xrange(n):
stype = self.cbTypes[i].get()
if stype == 'Fix':
p1 = self.cbPrm1s[i].get()
print(' %sConstraint(%s)' % (stype, p1))
result.append(FixConstraint(p1))
elif stype == 'Equality':
p1 = self.cbPrm1s[i].get()
p2 = self.cbPrm2s[i].get()
print(' %sConstraint(%s, %s)' % (stype, p1, p2))
result.append(EqualityConstraint(p1, p2))
elif stype == 'Concentric':
i1 = int(self.cbPrm1s[i].get()[1:])
i2 = int(self.cbPrm2s[i].get()[1:])
print(' %sConstraint(%i, %i)' % (stype, i1, i2))
result.append(ConcentricConstraint(i1, i2))
else:
raise Exception('Unknonw Constraint: "%s"' % stype)
return result
def show_help(self):
tkMessageBox.showinfo(
'Constraints Help', '''Types of constraints
*Fix* -- don't vary the parameter during fitting. Can be applied to any parameter.
*Equality* -- keep the values of to parameters equal. Can be applied to any parameters pair.
*Concentric* -- maintain the centers of two spheres at the same position. This position is still varied. Can be applied to spheres pair only.
''')
class JobParameters(Toplevel):
def __init__(self, parent=None, **kwargs):
Toplevel.__init__(self, parent)
self.title('Job Parameters')
self.parent = parent
self.main_frame = Frame(self)
self.input_directory_gui = DirectorySelector(self.main_frame, 'Input Directory:')
self.output_directory_gui = DirectorySelector(self.main_frame, 'Output Directory:', get_default=lambda: self.input_directory_gui.get_directory() + '/output/')
self.input_directory_gui.set_notify(self.notify)
self.beginning_year = kwargs['beginning_year'] if 'beginning_year' in kwargs else 1950
self.ending_year = kwargs['ending_year'] if 'ending_year' in kwargs else 2100
self.beginning_year_selector = YearSelector(self.main_frame, text="Beginning Year:", min_value=self.beginning_year, max_value=self.ending_year)
self.ending_year_selector = YearSelector(self.main_frame, text="Ending Year:", min_value=self.beginning_year, max_value=self.ending_year)
self.one_decade_range_var = IntVar()
self.one_decade_range = Checkbutton(self.main_frame, text='Calculate 10 Year Range', variable=self.one_decade_range_var, command=self.on_change)
self.two_decade_range_var = IntVar()
self.two_decade_range = Checkbutton(self.main_frame, text='Calculate 20 Year Range', variable=self.two_decade_range_var, command=self.on_change)
self.custom_range_var = IntVar()
self.custom_range = Checkbutton(self.main_frame, text='Calculate Custom Year Range', variable=self.custom_range_var, command=self.on_change)
self.custom_range_val = StringVar()
self.custom_range_input = Spinbox(self.main_frame, from_=30, to=100, textvariable=self.custom_range_val, command=self.on_change, width=5)
# Initialize widget values
self.beginning_year_selector.set_value(self.beginning_year)
self.beginning_year_selector.set_args(check_other_func=self.ending_year_selector.get_less_than)
self.ending_year_selector.set_value(self.ending_year)
self.ending_year_selector.set_args(check_other_func=self.beginning_year_selector.get_greater_than)
self.one_decade_range_var.set(1)
self.two_decade_range_var.set(1)
self.custom_range_var.set(0)
self.custom_range_input.config(state=Tkinter.DISABLED)
self.button_frame = Frame(self.main_frame)
self.ok_button = Button(self.button_frame, text='OK', command=self.on_submit)
self.cancel_button = Button(self.button_frame, text='Cancel', command=self.on_close)
self.job_id = kwargs['job_id'] if 'job_id' in kwargs else None
self.entry = kwargs['entry'] if 'entry' in kwargs else None
self.grab_set()
self.resizable(width=False, height=False)
def notify(self):
self.output_directory_gui.notify()
self.lift()
def set_grid(self):
# Layout child widgets
self.main_frame.grid()
self.input_directory_gui.set_grid(row=0, padx=6)
self.output_directory_gui.set_grid(row=1, padx=6)
self.beginning_year_selector.set_grid(row=2, padx=6)
self.ending_year_selector.set_grid(row=3, padx=6)
self.one_decade_range.grid(row=4, column=1, sticky='w', padx=6)
self.two_decade_range.grid(row=5, column=1, sticky='w', padx=6)
self.custom_range.grid(row=6, column=1, sticky='w', padx=6)
self.custom_range_input.grid(row=6, column=2, sticky='w', padx=6)
self.button_frame.grid(row=7, columnspan=3, sticky='nsew')
self.ok_button.pack(side=Tkinter.RIGHT)
self.cancel_button.pack(side=Tkinter.RIGHT)
#self.ok_button.grid(row=7, column=1, pady=2)
#self.cancel_button.grid(row=7, column=2, pady=2)
def on_change(self):
is_custom_range_checked = self.custom_range_var.get() == 1
if is_custom_range_checked:
self.custom_range_input.config(state=Tkinter.NORMAL)
else:
self.custom_range_input.config(state=Tkinter.DISABLED)
def on_submit(self):
if self.input_directory_gui.get_directory() == '' or self.output_directory_gui.get_directory() == '':
self.on_close()
return
# The job parameters are extracted from the GUI here and passed to the processing thread to run the requisite job.
job = dict()
job['job_id'] = self.job_id
job['delimiter'] = '.'
job['individual_files'] = False
job['input_directory'] = self.input_directory_gui.get_directory()
job['output_directory'] = self.output_directory_gui.get_directory()
job['start'] = self.beginning_year_selector.get_value()
job['end'] = self.ending_year_selector.get_value()
job['calculate_one_decade'] = self.one_decade_range_var.get() == 1
job['calculate_two_decade'] = self.two_decade_range_var.get() == 1
job['calculate_custom_range'] = self.custom_range_var.get() == 1
job['custom_range'] = int(self.custom_range_val.get())
job['log'] = True
if self.entry != None:
self.entry.add_job(job)
self.on_close()
def on_close(self):
if self.parent != None:
self.parent.focus_set()
self.withdraw()
self.destroy()
def on_focus(self):
self.focus_force()
def initUI(self):
self.parent.title("FIND BLR COEFFICIENT VALUE")
self.pack(fill=BOTH, expand=True)
self.columnconfigure(0, weight=1)
# self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
###### GUI Control Variables ######
self.LIMIT_L = IntVar()
self.LIMIT_H = IntVar()
self.PULSE_R = IntVar()
self.PULSE_L = IntVar()
self.pulse_height = DoubleVar()
self.hdf5_file = StringVar()
self.PMT = IntVar()
self.EVENT = IntVar()
self.amplitude_range = DoubleVar()
self.delta = DoubleVar()
self.noise_sigma = DoubleVar()
self.coeff = DoubleVar()
#self.DRAW = BooleanVar()
search = Image.open("next_logo.jpg")
search_temp = search.resize((170, 200), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0,
column=0,
columnspan=10,
rowspan=10,
sticky=E + W + S + N)
self.hdf5_file.set("2052.h5.z")
e1 = Entry(self, textvariable=self.hdf5_file, width=30)
e1.grid(row=1, column=1, sticky=W, columnspan=5, pady=5)
e1_label = Label(self, text="HDF5 file")
e1_label.grid(row=0, column=1, sticky=W, columnspan=5, pady=5)
self.PMT.set("0")
sb1 = Spinbox(self, from_=0, to=12, width=3, textvariable=self.PMT)
sb1.grid(row=3, column=2, sticky=W)
sb1_label = Label(self, text="PMT")
sb1_label.grid(row=2, column=2, padx=0, sticky=W)
self.EVENT.set("0")
sb1 = Spinbox(self, from_=0, to=1000, width=5, textvariable=self.EVENT)
sb1.grid(row=3, column=3, sticky=W)
sb1_label = Label(self, text="EVENT")
sb1_label.grid(row=2, column=3, padx=0, sticky=W)
self.LIMIT_L.set("19000")
sb1 = Spinbox(self,
from_=0,
to=100000,
width=5,
textvariable=self.LIMIT_L)
sb1.grid(row=5, column=2, sticky=W)
sb1_label = Label(self, text="ROI Start ")
sb1_label.grid(row=4, column=2, padx=0, sticky=W)
self.LIMIT_H.set("22500")
sb1 = Spinbox(self,
from_=0,
to=100000,
width=5,
textvariable=self.LIMIT_H)
sb1.grid(row=5, column=3, sticky=W)
sb1_label = Label(self, text="ROI End ")
sb1_label.grid(row=4, column=3, padx=0, sticky=W)
self.PULSE_R.set("20142")
sb1 = Spinbox(self,
from_=0,
to=100000,
width=8,
textvariable=self.PULSE_R)
sb1.grid(row=5, column=4, sticky=E)
sb1_label = Label(self, text=" Pulse Rise")
sb1_label.grid(row=4, column=4, padx=0, sticky=E)
self.PULSE_L.set("1200")
sb1 = Spinbox(self,
from_=0,
to=5000,
width=8,
textvariable=self.PULSE_L)
sb1.grid(row=5, column=5, sticky=E)
sb1_label = Label(self, text=" Pulse Length")
sb1_label.grid(row=4, column=5, padx=0, sticky=E)
sb1_label = Label(self, text=" ")
sb1_label.grid(row=2, column=7, padx=0, sticky=W)
sb1_label = Label(self, text=" ")
sb1_label.grid(row=6, column=7, padx=0, sticky=W)
self.pulse_height.set("545.5")
sb1 = Entry(self, width=8, textvariable=self.pulse_height)
sb1.grid(row=7, column=3, sticky=E)
sb1_label = Label(self, text=" Amplitude")
sb1_label.grid(row=6, column=3, padx=0, sticky=E)
self.amplitude_range.set("2")
sb1 = Entry(self, width=8, textvariable=self.amplitude_range)
sb1.grid(row=7, column=4, sticky=E)
sb1_label = Label(self, text=" Loop Range")
sb1_label.grid(row=6, column=4, padx=0, sticky=E)
self.delta.set("0.1")
sb1 = Entry(self, width=8, textvariable=self.delta)
sb1.grid(row=7, column=5, sticky=E)
sb1_label = Label(self, text=" Loop Delta")
sb1_label.grid(row=6, column=5, padx=0, sticky=E)
self.noise_sigma.set("4")
sb1 = Entry(self, width=3, textvariable=self.noise_sigma)
sb1.grid(row=5, column=6, sticky=E)
sb1_label = Label(self, text=" Noise Threshold")
sb1_label.grid(row=4, column=6, padx=0, sticky=E)
sb_coeff_label = Label(self, text="Coefficient ")
sb_coeff_label.grid(row=0, column=6, padx=0, sticky=E)
self.sb_coeff = Label(self)
self.sb_coeff.grid(row=1, column=6, padx=0, sticky=E)
# MAIN BUTTONS
obtn = Button(self, text="GO!!", command=self.find_C)
obtn.grid(row=14, column=4, sticky=E, pady=10)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=14, column=5, sticky=E, pady=10)
hbtn = Button(self, text="Help", command=self.help_f)
hbtn.grid(row=14, column=0, sticky=W, pady=10)
class MoveControl(LabelFrame):
def __init__(self, root, prtr, settings, log, *arg):
fn = os.path.join(settings.cmdFolder, "images", "control_xyz.png")
self.image = Image.open(fn)
self.photo = ImageTk.PhotoImage(self.image)
LabelFrame.__init__(self, root, *arg, text="Movement")
self.app = root
self.hilite = None
self.hilitemask = None
self.settings = settings
self.printer = prtr
self.log = log
l = Label(self, text="mm/min")
l.grid(row=1, column=2)
l = Label(self, text="X/Y Feed Rate:")
l.grid(row=2, column=1, sticky=E)
self.xyfeed = Spinbox(self, width=10, justify=RIGHT, from_=0, to=MAXFEED)
self.xyfeed.grid(row=2, column=2)
self.xyfeed.delete(0, END)
self.xyfeed.insert(0, settings.xyfeed)
self.xyfeed.bind("<FocusOut>", self.valxyFeed)
self.xyfeed.bind("<Leave>", self.valxyFeed)
l = Label(self, text="Z Feed Rate:")
l.grid(row=3, column=1, sticky=E)
self.zfeed = Spinbox(self, width=10, justify=RIGHT, from_=0, to=MAXFEED)
self.zfeed.grid(row=3, column=2)
self.zfeed.delete(0, END)
self.zfeed.insert(0, settings.zfeed)
self.zfeed.bind("<FocusOut>", self.valzFeed)
self.zfeed.bind("<Leave>", self.valzFeed)
self.canvas = Canvas(self, width=self.image.size[0], height=self.image.size[1], *arg)
self.canvas.create_image((0, 0), image=self.photo, anchor=N+W)
self.canvas.grid(row=4, column=1, columnspan=2)
for m in imageMasks:
self.canvas.create_oval((m[0][0]-mask_rad, m[0][1]-mask_rad, m[0][0]+mask_rad, m[0][1]+mask_rad),
outline="#FF0000", width=4, tags=m[1], state=HIDDEN)
self.canvas.bind("<Button-1>", self.OnLeftDown)
self.canvas.bind("<Motion>", self.OnMotion)
self.canvas.bind("<Enter>", self.OnEnter)
self.canvas.bind("<Leave>", self.OnLeave)
self.bAllOff = Button(self, text="Release Motors", command=self.allMotorsOff)
self.bAllOff.grid(row=5, column=1, columnspan=2)
def valxyFeed(self, *arg):
x = self.validFeed(self.xyfeed.get(), 'XY')
if x == None:
self.xyfeed.delete(0, END)
self.xyfeed.insert(0, "%d" % self.settings.xyfeed)
return True
if self.settings.xyfeed != x:
self.settings.xyfeed = x
self.settings.setModified()
return True
def valzFeed(self, *arg):
x = self.validFeed(self.zfeed.get(), 'Z')
if x == None:
self.zfeed.delete(0, END)
self.zfeed.insert(0, "%d" % self.settings.zfeed)
return True
if self.settings.zfeed != x:
self.settings.zfeed = x
self.settings.setModified()
return True
def validFeed(self, fv, axis):
try:
x = int(fv)
except:
self.log.logMsg("Value for %s feed rate not a valid integer" % axis)
return None
if x <=0 or x >MAXFEED:
self.log.logMsg("Value for %s feed rate out of range(0-5000)" % axis)
return None
return x
def allMotorsOff(self):
if self.app.printerAvailable(cmd="M84"):
self.printer.send_now("M84")
def OnMotion(self, e):
for i in range(len(imageGeometry)):
if boundBy((e.x, e.y), imageGeometry[i][0]):
self.setHilite(i)
return
if self.hilite != None:
self.clearHilite()
def OnEnter(self, e):
self.clearHilite()
def OnLeave(self, e):
self.clearHilite()
def setHilite(self, i):
if i != self.hilite:
self.canvas.delete("HILITE")
self.canvas.create_rectangle(imageGeometry[i][0], outline="#C85E5D", width=3, fill="gray", stipple="gray50", tags="HILITE")
self.hilite = i
if self.hilitemask:
self.canvas.itemconfig(self.hilitemask, state=HIDDEN)
if imageGeometry[i][2]:
self.hilitemask = imageGeometry[i][2]
self.canvas.itemconfig(self.hilitemask, state=NORMAL)
def clearHilite(self):
self.canvas.delete("HILITE")
self.hilite = None
self.hilitemask = None
for m in imageMasks:
self.canvas.itemconfig(m[1], state=HIDDEN)
def OnLeftDown(self, e):
if self.app.printerAvailable(cmd="G1"):
for g in imageGeometry:
if boundBy((e.x, e.y), g[0]):
if "G1" in g[1]:
if "X" in g[1]:
feed = self.settings.xyfeed
elif "Y" in g[1]:
feed = self.settings.xyfeed
elif "Z" in g[1]:
feed = self.settings.zfeed
else:
feed = 100
self.printer.send_now("G91")
self.printer.send_now(g[1] + " F" + str(feed))
self.printer.send_now("G90")
else:
self.printer.send_now(g[1])
break
def __init__(self, master=None):
"""
Constructor
"""
Frame.__init__(self,
master,
name='pvApplication',
bg='black',
padx=5,
pady=5)
# set black background, pad sides with 15 points, top/bottom 5 points
# fill=BOTH fills in padding with background color
# w/o fill=BOTH padding is default color
# side=TOP is the default
self.pack(fill=BOTH)
master.resizable(False, False) # not resizable in x or y
master.title(PVAPP_TXT) # set title bar of master (a.k.a. root)
master.protocol("WM_DELETE_WINDOW", self._quit) # close window to quit
self.validationConstants = self.readJSON('validationConstants')
self.messagetext = self.readJSON('messagetext' + '.' + LANGUAGE)
MAX_STRINGS = self.validationConstants["pvapplication"]["numStrs"]
MAX_MODULES = self.validationConstants["pvapplication"]["numMods"]
MAX_SUNS = self.validationConstants["pvapplication"]["sysEe"]
CAPTION_FONT = nametofont('TkCaptionFont') # font for titles
# PVsystem
pvSys = self.pvSys = PVsystem()
# variables
numStrs = self.numStrs = IntVar(self, NUMBERSTRS, 'numStrs')
numMods = self.numMods = IntVar(self, NUMBERMODS, 'numMods')
numCells = self.numCells = IntVar(self, NUMBERCELLS, 'numCells')
txtIsys = self.txtIsys = DoubleVar(self, name='txtIsys')
txtVsys = self.txtVsys = DoubleVar(self, name='txtVsys')
txtPsys = self.txtPsys = DoubleVar(self, name='txtPsys')
txtImp = self.txtImp = StringVar(self, name='txtImp')
txtVmp = self.txtVmp = StringVar(self, name='txtVmp')
txtPmp = self.txtPmp = StringVar(self, name='txtPmp')
txtIsc = self.txtIsc = StringVar(self, name='txtIsc')
txtVoc = self.txtVoc = StringVar(self, name='txtVoc')
txtFF = self.txtFF = StringVar(self, name='txtFF')
txtEff = self.txtEff = StringVar(self, name='txtEff')
sysEe = self.sysEe = DoubleVar(self, 1, name='sysEe')
txtImp.set("{:7.3f}".format(self.pvSys.Imp)) # [A]
txtVmp.set("{:7.3f}".format(self.pvSys.Vmp)) # [V]
txtPmp.set("{:7.3f}".format(self.pvSys.Pmp / 1000)) # [kW]
txtIsc.set("{:7.3f}".format(self.pvSys.Isc)) # [A]
txtVoc.set("{:7.3f}".format(self.pvSys.Voc)) # [V]
txtFF.set("{:7.3f}".format(self.pvSys.FF * 100)) # [%]
txtEff.set("{:7.3f}".format(self.pvSys.eff * 100)) # [%]
self.msgtext = StringVar(self, READY_MSG, 'msgtext')
# must register vcmd and invcmd as Tcl functions
vcmd = (self.register(self.validateWidget), '%d', '%i', '%P', '%s',
'%S', '%v', '%V', '%W')
invcmd = (self.register(self.invalidWidget), '%d', '%i', '%P', '%s',
'%S', '%v', '%V', '%W')
# SP logo
# convert image to tk-compatible format (.gif, .pgm, or .ppm)
self.SPlogo = ImageTk.PhotoImage(Image.open(SPLOGO))
# bg='black' fills extra space with black
# anchor=W aligns photoimage on left side, NW is no different
# padding is ignored by images, use borderwidth
Label(self, image=self.SPlogo, borderwidth=5, bg='black',
anchor=W).pack(fill=BOTH)
# fill=BOTH expands the photoimage to fill parent frame
# w/o fill=BOTH photoimage is centered in frame even with anchor=W
# Intro text
introText = 'PVmismatch calculates I-V and P-V curves as well as the'
introText += ' max power point (MPP) for any sized system.\nSet the'
introText += ' number of strings in the system, the number of modules'
introText += ' per string and the number cells per module.'
# anchor=W aligns message on left side, NW is no different
# fg='white' sets text color to white, default is black, so it doesn't
# show on black background
# default aspect is 150%, about as wide as high, or set width>0
Message(self,
text=introText,
width=750,
bg='black',
fg='white',
anchor=W).pack(fill=BOTH)
# fill=BOTH expands the message to fill parent frame
# w/o fill=BOTH message is centered in frame even with anchor=W
# PVsystem frame
pvSysFrame = self.pvSysFrame = Frame(master, name='pvSysFrame')
# fill=BOTH keeps widgets in frame on left when window is resized
pvSysFrame.pack(fill=BOTH)
# PVsystem matplotlib figure canvas
self.pvSysPlotFrame = Frame(pvSysFrame, name='pvSysPlotFrame')
pvSysPlotFrame = self.pvSysPlotFrame
pvSysPlotFrame.pack(side=RIGHT)
pvSysPlot = self.pvSysPlot = pvSys.plotSys()
self.pvSysFigCanvas = FigureCanvasTkAgg(pvSysPlot,
master=pvSysPlotFrame,
resize_callback=None)
pvSysFigCanvas = self.pvSysFigCanvas
pvSysFigCanvas.get_tk_widget()._name = 'pvSysFigCanvas' # IGNORE:W0212
pvSysFigCanvas.show()
# NB: FigureCanvasTkAgg._tkcanvas is FigureCanvasTkAgg.get_tk_widget()
pvSysFigCanvas.get_tk_widget().pack(fill=BOTH)
pvSysToolbar = NavigationToolbar2TkAgg(pvSysFigCanvas, pvSysPlotFrame)
pvSysToolbar.update()
pvSysToolbar.pack(fill=BOTH)
# PVsystem data frame
pvSysDataFrame = self.pvSysDataFrame = Frame(pvSysFrame,
name='pvSysDataFrame')
pvSysDataFrame.pack(side=LEFT)
_row = 0
Label(pvSysDataFrame, text='PVsystem',
font=CAPTION_FONT).grid(row=_row, columnspan=3, sticky=W)
# number of strings
_row += 1 # row 1
Label(pvSysDataFrame, text='Number of Strings').grid(row=_row,
columnspan=2,
sticky=W)
# use textVar to set number of strings from LOAD, RESET or default
spinboxCnf = {
'name': 'numStrSpinbox',
'from_': 1,
'to': MAX_STRINGS,
'textvariable': numStrs,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.numStrSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.numStrSpinbox.bind("<Return>", self.keyBinding)
self.numStrSpinbox.grid(row=_row, column=2)
# number of modules
_row += 1 # row 2
Label(pvSysDataFrame, text='Number of Modules').grid(row=_row,
columnspan=2,
sticky=W)
# number of modules spinbox
spinboxCnf = {
'name': 'numModSpinbox',
'from_': 1,
'to': MAX_MODULES,
'textvariable': numMods,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.numModSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.numModSpinbox.bind("<Return>", self.keyBinding)
self.numModSpinbox.grid(row=_row, column=2)
# number of cells
_row += 1 # row 3
Label(pvSysDataFrame, text='Number of Cells').grid(row=_row,
columnspan=2,
sticky=W)
# http://www.logilab.org/card/pylintfeatures#basic-checker
# pylint: disable = W0142
self.numCellOption = OptionMenu(pvSysDataFrame,
numCells,
*MODSIZES,
command=self.updatePVsys)
# pylint: enable = W0142
self.numCellOption._name = 'numCellOption' # IGNORE:W0212
self.numCellOption.grid(row=_row, column=2)
# Advanced Configuration button
_row += 1 # row 14
buttonCnf = {
'name': 'advCnfButton',
'text': 'Advanced Configuration',
'command': self.startAdvCnf_tk
}
pvStrButton = self.pvStrButton = Button(pvSysDataFrame, buttonCnf)
pvStrButton.grid(row=_row, columnspan=3, sticky=(E + W))
# slider to explore IV curves
_row += 1 # row 4, 5 & 6
self.pvSysScale = Scale(pvSysDataFrame,
orient=HORIZONTAL,
label='I-V Curve',
font=CAPTION_FONT,
command=self.getIV,
showvalue=False,
from_=0,
to=(pvSys.pvconst.npts - 1))
self.pvSysScale.grid(row=_row, columnspan=3, sticky=(E + W))
# Isys
Label(pvSysDataFrame, text='Isys [A]').grid(row=(_row + 1))
self.pvIsys = Entry(pvSysDataFrame, textvariable=txtIsys, width=7)
self.pvIsys.grid(row=(_row + 2))
# Vsys
Label(pvSysDataFrame, text='Vsys [V]').grid(row=(_row + 1), column=1)
self.pvVsys = Entry(pvSysDataFrame, textvariable=txtVsys, width=7)
self.pvVsys.grid(row=(_row + 2), column=1)
# Psys
Label(pvSysDataFrame, text='Psys [kW]').grid(row=(_row + 1), column=2)
self.pvPsys = Entry(pvSysDataFrame, textvariable=txtPsys, width=7)
self.pvPsys.grid(row=(_row + 2), column=2)
# Imp, Vmp & Pmp
_row += 3 # row 7, 8, 9, 10, 11 & 12
Label(pvSysDataFrame, text='I-V Characteristics',
font=CAPTION_FONT).grid(row=_row, columnspan=3, sticky=W)
Label(pvSysDataFrame, text='Imp [A]').grid(row=(_row + 1))
Label(pvSysDataFrame, text='Vmp [V]').grid(row=(_row + 1), column=1)
Label(pvSysDataFrame, text='Pmp [kW]').grid(row=(_row + 1), column=2)
self.pvImp = Entry(pvSysDataFrame,
textvariable=txtImp,
width=7,
state='readonly')
self.pvImp.grid(row=(_row + 2))
self.pvVmp = Entry(pvSysDataFrame,
textvariable=txtVmp,
width=7,
state='readonly')
self.pvVmp.grid(row=(_row + 2), column=1)
self.pvPmp = Entry(pvSysDataFrame,
textvariable=txtPmp,
width=7,
state='readonly')
self.pvPmp.grid(row=(_row + 2), column=2)
# Isc, Voc & FF
Label(pvSysDataFrame, text='Isc [A]').grid(row=(_row + 3))
Label(pvSysDataFrame, text='Voc [V]').grid(row=(_row + 3), column=1)
Label(pvSysDataFrame, text='FF [%]').grid(row=(_row + 3), column=2)
self.pvIsc = Entry(pvSysDataFrame,
textvariable=txtIsc,
width=7,
state='readonly')
self.pvIsc.grid(row=(_row + 4))
self.pvVoc = Entry(pvSysDataFrame,
textvariable=txtVoc,
width=7,
state='readonly')
self.pvVoc.grid(row=(_row + 4), column=1)
self.pvFF = Entry(pvSysDataFrame,
textvariable=txtFF,
width=7,
state='readonly')
self.pvFF.grid(row=(_row + 4), column=2)
Label(pvSysDataFrame, text='Efficiency [%]').grid(row=(_row + 5),
columnspan=2)
self.pvEff = Entry(pvSysDataFrame,
textvariable=txtEff,
width=7,
state='readonly')
self.pvEff.grid(row=(_row + 5), column=2)
# set suns
_row += 6 # row 13
Label(pvSysDataFrame, text='Irradiance [suns]',
font=CAPTION_FONT).grid(row=_row, columnspan=2, sticky=W)
# number of modules spinbox
spinboxCnf = {
'name': 'sunSpinbox',
'from_': 0.2,
'to': MAX_SUNS,
'increment': 0.1,
'textvariable': sysEe,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.sunSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.sunSpinbox.bind("<Return>", self.keyBinding)
self.sunSpinbox.grid(row=_row, column=2)
# PVstring button
_row += 1 # row 14
buttonCnf = {
'name': 'pvStrButton',
'text': 'PVstring',
'command': self.startPVstring_tk
}
pvStrButton = self.pvStrButton = Button(pvSysDataFrame, buttonCnf)
pvStrButton.grid(row=_row, columnspan=3, sticky=(E + W))
# toolbar
toolbar = self.toolbarframe = Frame(master, name='toolbar')
toolbar.pack(fill=BOTH)
self.QUIT = Button(toolbar, text='Quit', command=self._quit)
self.QUIT.pack(side=RIGHT)
self.SAVE = Button(toolbar, text='Save', command=self._save)
self.SAVE.pack(side=RIGHT)
self.LOAD = Button(toolbar, text='Load', command=self._load)
self.LOAD.pack(side=RIGHT)
self.RESET = Button(toolbar, text='Reset', command=self._reset)
self.RESET.pack(side=RIGHT)
self.UPDATE = Button(toolbar, text='Update', command=self._update)
self.UPDATE.pack(side=RIGHT)
self.HELP = Button(toolbar, text='Help', command=self._help)
self.HELP.pack(side=RIGHT)
self.MESSAGE = Message(toolbar,
textvariable=self.msgtext,
width=500,
fg='red')
self.MESSAGE.pack(side=LEFT)
class PVapplicaton(Frame):
"""
classdocs
"""
def __init__(self, master=None):
"""
Constructor
"""
Frame.__init__(self,
master,
name='pvApplication',
bg='black',
padx=5,
pady=5)
# set black background, pad sides with 15 points, top/bottom 5 points
# fill=BOTH fills in padding with background color
# w/o fill=BOTH padding is default color
# side=TOP is the default
self.pack(fill=BOTH)
master.resizable(False, False) # not resizable in x or y
master.title(PVAPP_TXT) # set title bar of master (a.k.a. root)
master.protocol("WM_DELETE_WINDOW", self._quit) # close window to quit
self.validationConstants = self.readJSON('validationConstants')
self.messagetext = self.readJSON('messagetext' + '.' + LANGUAGE)
MAX_STRINGS = self.validationConstants["pvapplication"]["numStrs"]
MAX_MODULES = self.validationConstants["pvapplication"]["numMods"]
MAX_SUNS = self.validationConstants["pvapplication"]["sysEe"]
CAPTION_FONT = nametofont('TkCaptionFont') # font for titles
# PVsystem
pvSys = self.pvSys = PVsystem()
# variables
numStrs = self.numStrs = IntVar(self, NUMBERSTRS, 'numStrs')
numMods = self.numMods = IntVar(self, NUMBERMODS, 'numMods')
numCells = self.numCells = IntVar(self, NUMBERCELLS, 'numCells')
txtIsys = self.txtIsys = DoubleVar(self, name='txtIsys')
txtVsys = self.txtVsys = DoubleVar(self, name='txtVsys')
txtPsys = self.txtPsys = DoubleVar(self, name='txtPsys')
txtImp = self.txtImp = StringVar(self, name='txtImp')
txtVmp = self.txtVmp = StringVar(self, name='txtVmp')
txtPmp = self.txtPmp = StringVar(self, name='txtPmp')
txtIsc = self.txtIsc = StringVar(self, name='txtIsc')
txtVoc = self.txtVoc = StringVar(self, name='txtVoc')
txtFF = self.txtFF = StringVar(self, name='txtFF')
txtEff = self.txtEff = StringVar(self, name='txtEff')
sysEe = self.sysEe = DoubleVar(self, 1, name='sysEe')
txtImp.set("{:7.3f}".format(self.pvSys.Imp)) # [A]
txtVmp.set("{:7.3f}".format(self.pvSys.Vmp)) # [V]
txtPmp.set("{:7.3f}".format(self.pvSys.Pmp / 1000)) # [kW]
txtIsc.set("{:7.3f}".format(self.pvSys.Isc)) # [A]
txtVoc.set("{:7.3f}".format(self.pvSys.Voc)) # [V]
txtFF.set("{:7.3f}".format(self.pvSys.FF * 100)) # [%]
txtEff.set("{:7.3f}".format(self.pvSys.eff * 100)) # [%]
self.msgtext = StringVar(self, READY_MSG, 'msgtext')
# must register vcmd and invcmd as Tcl functions
vcmd = (self.register(self.validateWidget), '%d', '%i', '%P', '%s',
'%S', '%v', '%V', '%W')
invcmd = (self.register(self.invalidWidget), '%d', '%i', '%P', '%s',
'%S', '%v', '%V', '%W')
# SP logo
# convert image to tk-compatible format (.gif, .pgm, or .ppm)
self.SPlogo = ImageTk.PhotoImage(Image.open(SPLOGO))
# bg='black' fills extra space with black
# anchor=W aligns photoimage on left side, NW is no different
# padding is ignored by images, use borderwidth
Label(self, image=self.SPlogo, borderwidth=5, bg='black',
anchor=W).pack(fill=BOTH)
# fill=BOTH expands the photoimage to fill parent frame
# w/o fill=BOTH photoimage is centered in frame even with anchor=W
# Intro text
introText = 'PVmismatch calculates I-V and P-V curves as well as the'
introText += ' max power point (MPP) for any sized system.\nSet the'
introText += ' number of strings in the system, the number of modules'
introText += ' per string and the number cells per module.'
# anchor=W aligns message on left side, NW is no different
# fg='white' sets text color to white, default is black, so it doesn't
# show on black background
# default aspect is 150%, about as wide as high, or set width>0
Message(self,
text=introText,
width=750,
bg='black',
fg='white',
anchor=W).pack(fill=BOTH)
# fill=BOTH expands the message to fill parent frame
# w/o fill=BOTH message is centered in frame even with anchor=W
# PVsystem frame
pvSysFrame = self.pvSysFrame = Frame(master, name='pvSysFrame')
# fill=BOTH keeps widgets in frame on left when window is resized
pvSysFrame.pack(fill=BOTH)
# PVsystem matplotlib figure canvas
self.pvSysPlotFrame = Frame(pvSysFrame, name='pvSysPlotFrame')
pvSysPlotFrame = self.pvSysPlotFrame
pvSysPlotFrame.pack(side=RIGHT)
pvSysPlot = self.pvSysPlot = pvSys.plotSys()
self.pvSysFigCanvas = FigureCanvasTkAgg(pvSysPlot,
master=pvSysPlotFrame,
resize_callback=None)
pvSysFigCanvas = self.pvSysFigCanvas
pvSysFigCanvas.get_tk_widget()._name = 'pvSysFigCanvas' # IGNORE:W0212
pvSysFigCanvas.show()
# NB: FigureCanvasTkAgg._tkcanvas is FigureCanvasTkAgg.get_tk_widget()
pvSysFigCanvas.get_tk_widget().pack(fill=BOTH)
pvSysToolbar = NavigationToolbar2TkAgg(pvSysFigCanvas, pvSysPlotFrame)
pvSysToolbar.update()
pvSysToolbar.pack(fill=BOTH)
# PVsystem data frame
pvSysDataFrame = self.pvSysDataFrame = Frame(pvSysFrame,
name='pvSysDataFrame')
pvSysDataFrame.pack(side=LEFT)
_row = 0
Label(pvSysDataFrame, text='PVsystem',
font=CAPTION_FONT).grid(row=_row, columnspan=3, sticky=W)
# number of strings
_row += 1 # row 1
Label(pvSysDataFrame, text='Number of Strings').grid(row=_row,
columnspan=2,
sticky=W)
# use textVar to set number of strings from LOAD, RESET or default
spinboxCnf = {
'name': 'numStrSpinbox',
'from_': 1,
'to': MAX_STRINGS,
'textvariable': numStrs,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.numStrSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.numStrSpinbox.bind("<Return>", self.keyBinding)
self.numStrSpinbox.grid(row=_row, column=2)
# number of modules
_row += 1 # row 2
Label(pvSysDataFrame, text='Number of Modules').grid(row=_row,
columnspan=2,
sticky=W)
# number of modules spinbox
spinboxCnf = {
'name': 'numModSpinbox',
'from_': 1,
'to': MAX_MODULES,
'textvariable': numMods,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.numModSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.numModSpinbox.bind("<Return>", self.keyBinding)
self.numModSpinbox.grid(row=_row, column=2)
# number of cells
_row += 1 # row 3
Label(pvSysDataFrame, text='Number of Cells').grid(row=_row,
columnspan=2,
sticky=W)
# http://www.logilab.org/card/pylintfeatures#basic-checker
# pylint: disable = W0142
self.numCellOption = OptionMenu(pvSysDataFrame,
numCells,
*MODSIZES,
command=self.updatePVsys)
# pylint: enable = W0142
self.numCellOption._name = 'numCellOption' # IGNORE:W0212
self.numCellOption.grid(row=_row, column=2)
# Advanced Configuration button
_row += 1 # row 14
buttonCnf = {
'name': 'advCnfButton',
'text': 'Advanced Configuration',
'command': self.startAdvCnf_tk
}
pvStrButton = self.pvStrButton = Button(pvSysDataFrame, buttonCnf)
pvStrButton.grid(row=_row, columnspan=3, sticky=(E + W))
# slider to explore IV curves
_row += 1 # row 4, 5 & 6
self.pvSysScale = Scale(pvSysDataFrame,
orient=HORIZONTAL,
label='I-V Curve',
font=CAPTION_FONT,
command=self.getIV,
showvalue=False,
from_=0,
to=(pvSys.pvconst.npts - 1))
self.pvSysScale.grid(row=_row, columnspan=3, sticky=(E + W))
# Isys
Label(pvSysDataFrame, text='Isys [A]').grid(row=(_row + 1))
self.pvIsys = Entry(pvSysDataFrame, textvariable=txtIsys, width=7)
self.pvIsys.grid(row=(_row + 2))
# Vsys
Label(pvSysDataFrame, text='Vsys [V]').grid(row=(_row + 1), column=1)
self.pvVsys = Entry(pvSysDataFrame, textvariable=txtVsys, width=7)
self.pvVsys.grid(row=(_row + 2), column=1)
# Psys
Label(pvSysDataFrame, text='Psys [kW]').grid(row=(_row + 1), column=2)
self.pvPsys = Entry(pvSysDataFrame, textvariable=txtPsys, width=7)
self.pvPsys.grid(row=(_row + 2), column=2)
# Imp, Vmp & Pmp
_row += 3 # row 7, 8, 9, 10, 11 & 12
Label(pvSysDataFrame, text='I-V Characteristics',
font=CAPTION_FONT).grid(row=_row, columnspan=3, sticky=W)
Label(pvSysDataFrame, text='Imp [A]').grid(row=(_row + 1))
Label(pvSysDataFrame, text='Vmp [V]').grid(row=(_row + 1), column=1)
Label(pvSysDataFrame, text='Pmp [kW]').grid(row=(_row + 1), column=2)
self.pvImp = Entry(pvSysDataFrame,
textvariable=txtImp,
width=7,
state='readonly')
self.pvImp.grid(row=(_row + 2))
self.pvVmp = Entry(pvSysDataFrame,
textvariable=txtVmp,
width=7,
state='readonly')
self.pvVmp.grid(row=(_row + 2), column=1)
self.pvPmp = Entry(pvSysDataFrame,
textvariable=txtPmp,
width=7,
state='readonly')
self.pvPmp.grid(row=(_row + 2), column=2)
# Isc, Voc & FF
Label(pvSysDataFrame, text='Isc [A]').grid(row=(_row + 3))
Label(pvSysDataFrame, text='Voc [V]').grid(row=(_row + 3), column=1)
Label(pvSysDataFrame, text='FF [%]').grid(row=(_row + 3), column=2)
self.pvIsc = Entry(pvSysDataFrame,
textvariable=txtIsc,
width=7,
state='readonly')
self.pvIsc.grid(row=(_row + 4))
self.pvVoc = Entry(pvSysDataFrame,
textvariable=txtVoc,
width=7,
state='readonly')
self.pvVoc.grid(row=(_row + 4), column=1)
self.pvFF = Entry(pvSysDataFrame,
textvariable=txtFF,
width=7,
state='readonly')
self.pvFF.grid(row=(_row + 4), column=2)
Label(pvSysDataFrame, text='Efficiency [%]').grid(row=(_row + 5),
columnspan=2)
self.pvEff = Entry(pvSysDataFrame,
textvariable=txtEff,
width=7,
state='readonly')
self.pvEff.grid(row=(_row + 5), column=2)
# set suns
_row += 6 # row 13
Label(pvSysDataFrame, text='Irradiance [suns]',
font=CAPTION_FONT).grid(row=_row, columnspan=2, sticky=W)
# number of modules spinbox
spinboxCnf = {
'name': 'sunSpinbox',
'from_': 0.2,
'to': MAX_SUNS,
'increment': 0.1,
'textvariable': sysEe,
'width': 5,
'validate': 'all',
'validatecommand': vcmd,
'invalidcommand': invcmd,
'command': self.updatePVsys
}
self.sunSpinbox = Spinbox(pvSysDataFrame, cnf=spinboxCnf)
self.sunSpinbox.bind("<Return>", self.keyBinding)
self.sunSpinbox.grid(row=_row, column=2)
# PVstring button
_row += 1 # row 14
buttonCnf = {
'name': 'pvStrButton',
'text': 'PVstring',
'command': self.startPVstring_tk
}
pvStrButton = self.pvStrButton = Button(pvSysDataFrame, buttonCnf)
pvStrButton.grid(row=_row, columnspan=3, sticky=(E + W))
# toolbar
toolbar = self.toolbarframe = Frame(master, name='toolbar')
toolbar.pack(fill=BOTH)
self.QUIT = Button(toolbar, text='Quit', command=self._quit)
self.QUIT.pack(side=RIGHT)
self.SAVE = Button(toolbar, text='Save', command=self._save)
self.SAVE.pack(side=RIGHT)
self.LOAD = Button(toolbar, text='Load', command=self._load)
self.LOAD.pack(side=RIGHT)
self.RESET = Button(toolbar, text='Reset', command=self._reset)
self.RESET.pack(side=RIGHT)
self.UPDATE = Button(toolbar, text='Update', command=self._update)
self.UPDATE.pack(side=RIGHT)
self.HELP = Button(toolbar, text='Help', command=self._help)
self.HELP.pack(side=RIGHT)
self.MESSAGE = Message(toolbar,
textvariable=self.msgtext,
width=500,
fg='red')
self.MESSAGE.pack(side=LEFT)
# Validation substitutions
# %d Type of action: 1 for insert, 0 for delete, or -1 for focus, forced or
# textvariable validation.
# %i Index of char string to be inserted/deleted, if any, otherwise -1.
# %P The value of the spinbox should edition occur. If you are configuring
# the spinbox widget to have a new textvariable, this will be the value
# of that textvariable.
# %s The current value of spinbox before edition.
# %S The text string being inserted/deleted, if any. Otherwise it is an
# empty string.
# %v The type of validation currently set.
# %V The type of validation that triggered the callback (key, focusin,
# focusout, forced).
# %W The name of the spinbox widget.
# TODO: Fix these functions so that delete and overwrite work
def validateWidget(self, *args):
# W = Tkinter.W = 'w' is already used, so use W_ instead
(d, i, P, s, S, v, V, W_) = args # @UnusedVariable # IGNORE:W0612
logging.debug(
"OnValidate: d={}, i={}, P={}, s={}, S={}, v={}, V={}, W={}".
format(*args))
if W_ == ".pvSysFrame.pvSysDataFrame.numStrSpinbox":
valType = INTEGERS
valTest = lambda val: int(val) # IGNORE:W0108
elif W_ == ".pvSysFrame.pvSysDataFrame.numModSpinbox":
valType = INTEGERS
valTest = lambda val: int(val) # IGNORE:W0108
elif W_ == ".pvSysFrame.pvSysDataFrame.sunSpinbox":
valType = FLOATS
valTest = lambda val: float(val) # IGNORE:W0108
else:
return False
w = self.nametowidget(W_)
w.config(validate=v)
if S in valType:
try:
valTest(P)
except ValueError:
return False
return True
else:
return False
def invalidWidget(self, *args):
(d, i, P, s, S, v, V, W_) = args # @UnusedVariable # IGNORE:W0612
logging.debug(
"OnInvalid: d={}, i={}, P={}, s={}, S={}, v={}, V={}, W={}".format(
*args))
if W_ == ".pvSysFrame.pvSysDataFrame.numStrSpinbox":
errText = 'Invalid number of strings!'
elif W_ == ".pvSysFrame.pvSysDataFrame.numModSpinbox":
errText = 'Invalid number of modules!'
elif W_ == ".pvSysFrame.pvSysDataFrame.sunSpinbox":
errText = 'Invalid irradiance!'
else:
errText = 'Unknown widget!'
w = self.nametowidget(W_)
w.config(validate=v)
self.msgtext.set(errText)
self.bell()
def getIV(self, *args):
logging.debug('args:\n\t%r', args)
x = np.float64(float(args[0]) / self.pvSys.pvconst.npts / 2.)
xp = np.concatenate(
(self.pvSys.pvconst.negpts, self.pvSys.pvconst.pts),
axis=0).flatten()
Vsys = np.interp(x, xp, self.pvSys.Vsys)
Isys = np.interp(x, xp, self.pvSys.Isys)
Psys = Vsys * Isys / 1000
self.txtVsys.set("{:7.3f}".format(Vsys))
self.txtIsys.set("{:7.3f}".format(Isys))
self.txtPsys.set("{:7.3f}".format(Psys))
def startPVstring_tk(self):
top = Toplevel()
app = PVstring_tk(self, top)
app.mainloop()
# please destroy me or I'll continue to run in background
top.destroy()
def startAdvCnf_tk(self):
"""
open advnaced config window
"""
top = Toplevel(name='advCnfTop')
app = AdvCnf_tk(self, top)
app.mainloop()
# please destroy me or I'll continue to run in background
top.destroy()
def keyBinding(self, event):
logging.debug('event widget:\n\t%r', event.widget)
logging.debug('event widget get:\n\t%r', event.widget.get())
self.updatePVsys()
def updatePVsys(self, *args, **kwargs):
logging.debug('args:\n\t%r', args)
logging.debug('kwargs:\n\t%r', kwargs)
if args and isinstance(args[0], PVsystem_cls):
pvsys = args[0]
for n, pvstr in enumerate(pvsys.pvstrs):
for pvmod in pvstr.pvmods:
pvmod.calcMod()
pvstr.calcString()
logging.debug('updating pvstring #%d: Pmp = %g[W]', n,
pvstr.Pstring.max())
return
PVAPP = "pvapplication"
try:
numStrs = self.numStrs.get()
if not (0 < numStrs <= self.validationConstants[PVAPP]["numStrs"]):
raise PVValidationError('numStrs', numStrs)
numMods = self.numMods.get()
if not (0 < numMods <= self.validationConstants[PVAPP]["numMods"]):
raise PVValidationError('numMods', numMods)
sysEe = self.sysEe.get()
if not (0 < sysEe <= self.validationConstants[PVAPP]["sysEe"]):
raise PVValidationError('sysEe', sysEe)
except PVValidationError as err:
logging.debug('err:\n\t%r', err)
errtext = self.messagetext[PVAPP][err.argname]
self.msgtext.set(errtext)
self.bell()
return
numCells = self.numCells.get()
self.msgtext.set(self.messagetext[PVAPP]["Ready"])
pvconst = self.pvSys.pvconst
pvcell = PVcell(Ee=sysEe)
if numCells == 24:
numCells = STD24
elif numCells == 72:
numCells = STD72
elif numCells == 96:
numCells = STD96
elif numCells == 128:
numCells = STD128
pvmods = PVmodule(cell_pos=numCells, pvcells=pvcell)
self.pvSys = PVsystem(pvconst,
numStrs,
numberMods=numMods,
pvmods=pvmods)
self.updateIVstats()
def updateIVstats(self):
# reuse sysPlot figure and update pvSysFigCanvas
self.pvSysPlot = self.pvSys.plotSys(self.pvSysPlot)
self.pvSysFigCanvas.show()
self.txtImp.set("{:7.3f}".format(self.pvSys.Imp)) # [A]
self.txtVmp.set("{:7.3f}".format(self.pvSys.Vmp)) # [V]
self.txtPmp.set("{:7.3f}".format(self.pvSys.Pmp / 1000)) # [kW]
self.txtIsc.set("{:7.3f}".format(self.pvSys.Isc)) # [A]
self.txtVoc.set("{:7.3f}".format(self.pvSys.Voc)) # [V]
self.txtFF.set("{:7.3f}".format(self.pvSys.FF * 100)) # [%]
self.txtEff.set("{:7.3f}".format(self.pvSys.eff * 100)) # [%]
def _help(self):
logging.debug('show docs in browser')
webbrowser.open(DOCS)
def _update(self):
self.msgtext.set(READY_MSG)
self.updatePVsys()
def _reset(self):
# number of strings integer variable
self.numStrs.set(NUMBERSTRS) # default
# number of modules integer variable
self.numMods.set(NUMBERMODS) # default
# number of cells integer variable
self.numCells.set(NUMBERCELLS) # default value is 96
self.msgtext.set(READY_MSG)
# TODO: need to reset advCnf too
logging.debug('reset')
def _load(self):
logging.debug('load *.pv file')
def _save(self):
logging.debug('save *.pv file')
def _quit(self):
# this is necessary on Windows to prevent
# Fatal Python Error: PyEval_RestoreThread: NULL tstate
self.master.quit() # stops mainloop
self.master.destroy()
def readJSON(self, JSONfilename):
if not JSONfilename.endswith('json'):
JSONfilename += '.json'
JSONfullpath = os.path.join(JSONDIR, JSONfilename)
with open(JSONfullpath, 'r') as JSONfile:
JSONObjects = json.load(JSONfile)
logging.debug('JSON objects loaded from %s.', JSONfullpath)
return JSONObjects
class pump_ui(object):
def __init__(self):
master = Tk()
master.style = ttk.Style()
master.style.theme_use("default")
master.config(bg=background_colour)
master.resizable(
0, 0
) # Disable resizing the UI to prevent having to make widget placing dynamic
master.winfo_toplevel().title(frame_title)
master.iconbitmap("bitcoin.ico")
# Create pumper assistant to store data on the current BTC and alt holdings.
self.pumper = pumper()
self.create_title(master)
self.create_api_info(master, previous_row=0)
self.create_auto_sell(master, previous_row=3)
self.create_stop_loss(master, previous_row=4)
self.create_order_type(master, previous_row=6)
self.create_fee_type(master, previous_row=7)
self.create_btc_balance_picker(master, previous_row=8)
self.create_alt_ticker(master, previous_row=10)
self.create_pump_and_sell_buttons(master, previous_row=11)
self.create_current_profit(master, previous_row=12)
self.create_output_box(master, rightmost_column=1)
# Can hardcode API key and Secret
#self.api_key_entry.delete(0,END)
#self.api_key_entry.insert(0,"KEY")
#self.api_key_entry.config(state=DISABLED)
#self.api_secret_entry.delete(0, END)
#self.api_secret_entry.insert(0, "SECRET")
#self.api_secret_entry.config(state=DISABLED)
# Display the UI, this can only be called once per program.
# Nothing in the main Python script will be run after creating the UI because of this.
master.mainloop()
def create_title(self, master, previous_row=-1, previous_column=-1):
empty = Label(master, text=frame_title)
empty.grid(row=previous_row + 1,
column=previous_column + 2,
columnspan=1)
empty.config(bg=background_colour, fg=label_font_colour)
def create_api_info(self, master, previous_row=-1, previous_column=-1):
api_key_lbl = Label(master, text="API Key:")
api_key_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
api_key_lbl.config(bg=background_colour, fg=label_font_colour)
self.api_key_entry = Entry(master,
highlightthickness=0,
bd=0,
width=21,
show="*")
self.api_key_entry.config(borderwidth=2, relief=default_relief)
self.api_key_entry.grid(row=previous_row + 1,
column=previous_column + 2)
api_secret_lbl = Label(master, text="API Secret:")
api_secret_lbl.grid(row=previous_row + 2,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
api_secret_lbl.config(bg=background_colour, fg=label_font_colour)
self.api_secret_entry = Entry(master,
highlightthickness=0,
bd=0,
width=21,
show="*")
self.api_secret_entry.config(borderwidth=2, relief=default_relief)
self.api_secret_entry.grid(row=previous_row + 2,
column=previous_column + 2)
self.api_connect_btn = Button(master,
text="Connect To Binance",
command=self.on_connect_api)
self.api_connect_btn.grid(row=previous_row + 3,
column=previous_column + 2,
columnspan=1,
sticky=W + E,
padx=10,
pady=(0, 3))
self.api_connect_btn.config(highlightbackground=background_colour)
def create_auto_sell(self, master, previous_row=-1, previous_column=-1):
auto_sell_lbl = Label(master, text="Auto Sell (%):")
auto_sell_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
auto_sell_lbl.config(bg=background_colour, fg=label_font_colour)
self.auto_sell_spinbox = Spinbox(master,
from_=1.0,
to=300.0,
increment=1.0,
highlightbackground=background_colour)
self.auto_sell_spinbox.config(borderwidth=2, relief=default_relief)
self.auto_sell_spinbox.grid(row=previous_row + 1,
column=previous_column + 2)
self.auto_sell_spinbox.delete(0, "end")
self.auto_sell_spinbox.insert(0, 50)
def create_stop_loss(self, master, previous_row=-1, previous_column=-1):
stop_loss_lbl = Label(master, text="Stop Loss (%):")
stop_loss_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0))
stop_loss_lbl.config(bg=background_colour, fg=label_font_colour)
self.stop_loss_spinbox = Spinbox(master,
from_=-100.0,
to=-10.0,
increment=1.0,
highlightbackground=background_colour)
self.stop_loss_spinbox.config(borderwidth=2, relief=default_relief)
self.stop_loss_spinbox.grid(row=previous_row + 1,
column=previous_column + 2)
self.stop_loss_spinbox.delete(0, "end")
self.stop_loss_spinbox.insert(0, -10)
def create_btc_balance_picker(self,
master,
previous_row=-1,
previous_column=-1):
self.btc_balance_str = StringVar()
btc_balance_lbl = Label(master, textvar=self.btc_balance_str)
btc_balance_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=2,
sticky=W + E,
padx=(3, 0))
btc_balance_lbl.config(bg=background_colour, fg=label_font_colour)
self.set_available_btc_balance(Decimal(0))
btc_to_use_label = Label(master,
text="BTC to spend:",
bg=background_colour,
fg=label_font_colour)
btc_to_use_label.grid(row=previous_row + 2,
column=previous_column + 1,
sticky=E,
padx=(3, 0))
self.btc_to_use_spinbox = Spinbox(
master,
from_=minimum_trade,
to=minimum_trade,
increment=btc_to_use_increment,
highlightbackground=background_colour)
self.btc_to_use_spinbox.config(borderwidth=2, relief=default_relief)
self.btc_to_use_spinbox.grid(row=previous_row + 2,
column=previous_column + 2)
def create_order_type(self, master, previous_row=-1, previous_column=-1):
order_type_lbl = Label(master, text="Entry Type:")
order_type_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
sticky=E,
padx=(3, 0))
order_type_lbl.config(bg=background_colour, fg=label_font_colour)
self.is_entry_market = True
def change_order_type(*args):
self.is_entry_market = (self.order_type.get() == "Market Buy \/")
self.order_type = StringVar()
self.order_type.trace(
"w", change_order_type
) # Reduces how much work is done when the pump starts
choices = {"Market Buy \/", "Limit Buy \/"}
self.entry_type_option_menu = OptionMenu(master, self.order_type,
*choices)
self.entry_type_option_menu.grid(row=previous_row + 1,
column=previous_column + 2,
sticky=W + E,
padx=8)
self.entry_type_option_menu.config(highlightthickness=0)
self.entry_type_option_menu.configure(indicatoron=0)
self.order_type.set("Market Buy \/")
def create_fee_type(self, master, previous_row=-1, previous_column=-1):
fee_type_lbl = Label(master, text="Fee Type:")
fee_type_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
sticky=E,
padx=(3, 0))
fee_type_lbl.config(bg=background_colour, fg=label_font_colour)
self.is_using_bnb = True
def change_fee_type(*args):
self.is_using_bnb = (
self.order_type.get() == "Binance Coin (BNB) \/")
self.fee_type = StringVar()
self.fee_type.trace(
"w", change_fee_type
) # Reduces how much work is done when the pump starts
choices = {"Binance Coin (BNB) \/", "0.1% Of All Trades \/"}
self.fee_type_option_menu = OptionMenu(master, self.fee_type, *choices)
self.fee_type_option_menu.grid(row=previous_row + 1,
column=previous_column + 2,
sticky=W + E,
padx=8)
self.fee_type_option_menu.config(highlightthickness=0)
self.fee_type_option_menu.configure(indicatoron=0)
self.fee_type.set("Binance Coin (BNB) \/")
def create_pump_and_sell_buttons(self,
master,
previous_row=-1,
previous_column=-1):
# Manual sell button can only be activated after initiating a pump.
self.manual_sell_btn = Button(master,
text="Sell",
state=DISABLED,
command=self.on_manual_sell)
self.manual_sell_btn.grid(row=previous_row + 1,
column=previous_column + 1,
sticky=W + E,
padx=(3, 0))
self.manual_sell_btn.config(highlightbackground=background_colour)
self.pump_btn = Button(master, text="Pump", command=self.on_pump)
self.pump_btn.grid(row=previous_row + 1,
column=previous_column + 2,
sticky=W + E,
padx=8)
self.pump_btn.config(highlightbackground=background_colour,
state=DISABLED)
def create_alt_ticker(self, master, previous_row=-1, previous_column=-1):
ticker_lbl = Label(master, text="Ticker To Pump:")
ticker_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=1,
sticky=E,
padx=(3, 0),
pady=(0, 8))
ticker_lbl.config(bg=background_colour, fg=label_font_colour)
self.ticker_entry = Entry(master, highlightthickness=0, bd=0, width=21)
self.ticker_entry.config(borderwidth=2, relief=default_relief)
self.ticker_entry.grid(row=previous_row + 1,
column=previous_column + 2,
pady=8)
self.ticker_entry.bind('<Return>', self.on_pump_shortcut)
def create_current_profit(self,
master,
previous_row=-1,
previous_column=-1):
self.current_profit_str = StringVar()
current_profit_lbl = Label(master, textvar=self.current_profit_str)
current_profit_lbl.grid(row=previous_row + 1,
column=previous_column + 1,
columnspan=2,
sticky=W + E,
padx=3,
pady=(0, 3))
current_profit_lbl.config(bg=background_colour, fg=label_font_colour)
self.current_profit_str.set("Current Profit: 0%")
def create_output_box(self, master, rightmost_column):
self.pump_output = StringVar()
console_lbl = Label(master,
textvar=self.pump_output,
borderwidth=2,
relief=default_relief,
anchor=N)
console_lbl.grid(row=0,
column=rightmost_column + 1,
columnspan=1,
rowspan=14,
padx=(10, 0),
pady=0)
console_lbl.config(width=50,
height=22,
bg="black",
font=Font(family="Courier", size=9),
fg="white")
self.lines = 0
def disable_pre_pump_options(self):
# Change the buttons that can be clicked to prevent the user
# from trying to pump multiple coins with one bot.
self.manual_sell_btn.config(state=NORMAL)
self.pump_btn.config(state=DISABLED)
self.btc_to_use_spinbox.config(state=DISABLED)
self.ticker_entry.config(state=DISABLED)
self.auto_sell_spinbox.config(state=DISABLED)
self.stop_loss_spinbox.config(state=DISABLED)
self.api_key_entry.config(
state=DISABLED) # Comment out if hardcoding key
self.api_secret_entry.config(
state=DISABLED) # Comment out if hardcoding secret
self.api_connect_btn.config(state=DISABLED)
self.entry_type_option_menu.config(state=DISABLED)
self.fee_type_option_menu.config(state=DISABLED)
def enable_pump_options(self):
# Change the buttons that can be clicked to prevent the user
# from trying to pump multiple coins with one bot.
self.manual_sell_btn.config(state=DISABLED)
self.pump_btn.config(state=NORMAL)
self.btc_to_use_spinbox.config(state=NORMAL)
self.ticker_entry.config(state=NORMAL)
self.auto_sell_spinbox.config(state=NORMAL)
self.stop_loss_spinbox.config(state=NORMAL)
self.api_key_entry.config(
state=NORMAL) # Comment out if hardcoding key
self.api_secret_entry.config(
state=NORMAL) # Comment out if hardcoding secret
self.api_connect_btn.config(state=NORMAL)
self.entry_type_option_menu.config(state=NORMAL)
self.fee_type_option_menu.config(state=NORMAL)
def set_available_btc_balance(self, btc_balance):
self.pumper.btc_balance = btc_balance
self.btc_balance_str.set("Available Balance: " +
readable_btc_balance(btc_balance))
def set_current_profit(self, current_profit):
self.current_profit_str.set(
"Current Profit: " +
'{0:.3f}'.format(round(current_profit * Decimal(100), 3)) + "%")
def write_to_console(self, line):
self.lines += 1
if self.lines > max_lines_in_console:
i = self.pump_output.get().index('\n')
self.pump_output.set(self.pump_output.get()[i + 1:] + "\n" + line)
elif self.lines == 1:
self.pump_output.set(line)
else:
self.pump_output.set(self.pump_output.get() + "\n" + line)
#### Button Behaviour ####
def on_pump(self):
try:
api = self.api
btc_to_use = Decimal(self.btc_to_use_spinbox.get())
except InvalidOperation:
# The BTC to spend box is empty.
self.write_to_console("Stop!")
self.write_to_console("BTC to spend cannot be empty.")
return
except AttributeError:
# There is no API object.
self.write_to_console(
"You need to connect to Binance before pumping.")
return
if btc_to_use >= minimum_trade:
if btc_to_use <= self.pumper.btc_balance:
target_profit_percentage = Decimal(
float(self.auto_sell_spinbox.get()) / 100.0)
# Validate auto-sell and stop loss
if target_profit_percentage <= Decimal(0):
self.write_to_console("Auto sell has to be positive.")
return
if Decimal(self.stop_loss_spinbox.get()) >= Decimal(0):
self.write_to_console("Stop loss has to be negative.")
return
ticker = self.ticker_entry.get().upper()
# Empty strings are False in Python
if ticker:
full_ticker = api.full_ticker_for(ticker)
try:
alt = self.api.get_ticker(symbol=full_ticker)
except BinanceAPIException, e:
logging.debug(str(e))
self.write_to_console("Invalid ticker.")
return
alt_value = Decimal(alt["askPrice"])
# Used in console output
decimal_points = minimum_decimals_in_quantity.get(
full_ticker, 0)
self.pumper.decimal_points_in_alt = decimal_points
self.pumper.set_up(btc_to_use, target_profit_percentage,
alt_value, ticker)
if self.is_entry_market:
self.pumper.alt_holdings = api.market_buy(
self.pumper.btc_to_use, full_ticker,
self.is_using_bnb)
self.write_to_console(
"Bought " + readable_alt_balance(
decimal_points, pumper=self.pumper) +
" with " + readable_btc_balance(btc_to_use) + ".")
else:
highest_bid = Decimal(alt["bidPrice"])
if alt_value - highest_bid <= Decimal(0.00000001):
to_bid = highest_bid
else:
# Bid between the highest bid and the lowest ask for the best odds of being filled.
to_bid = (alt_value -
highest_bid) / 2 + highest_bid
to_bid = Decimal(
floor(to_bid * Decimal(100000000.0))
) / Decimal(100000000.0)
self.pumper.starting_alt_value = to_bid
expected = api.limit_buy(
btc_to_alt(btc_to_use, alt_value), pumper,
full_ticker, to_bid, self.is_using_bnb)
self.write_to_console("Buying " + readable_alt_balance(
decimal_points, alt_amount=expected, ticker=ticker
) + " for " + readable_btc_balance(btc_to_use) + ".")
self.write_to_console(
"This is a limit order, it may not get filled.")
self.disable_pre_pump_options()
self.set_stop_loss()
self.start_monitoring_orderbook(full_ticker)
else:
# The user is trying to trade with more than they actually have.
self.write_to_console("You did not enter a ticker.")
else:
# The user is trying to trade with more than they actually have.
self.write_to_console("Stop!")
self.write_to_console(
"You are trying to spend more BTC than you have.")
else:
class ChargenColor:
def __init__(self, parent):
self.colorNegative = []
self.colorNeutral = []
self.colorPositive = []
self.scaleNegative = 0.0
self.scalePositive = 0.0
self.cNegative = '#ff0000'
self.cNeutral = '#000000'
self.cPositive = '#0000ff'
self.minNegativeLbl = Label(rootC, text='Min Found: -')
self.maxPositiveLbl = Label(rootC, text='Max Found: -')
self.scaleLbl = Label(rootC, text='Scale: - to -')
self.sclSelectPositive = Spinbox(rootC)
self.sclSelectPositive.insert(0, 0.0)
self.sclSelectNegative = Spinbox(rootC)
self.sclSelectNegative.insert(0, 0.0)
self.buttonNegativeCharge = Button(
rootC, text='Negative Charge Color', command=self.chooseNegativeCharge)
self.buttonNeutralCharge = Button(
rootC, text='Neutral Charge Color', command=self.chooseNeutralCharge)
self.buttonPositiveCharge = Button(
rootC, text='Positive Charge Color', command=self.choosePositiveCharge)
self.buttonBG = Button(
rootC, text='Background Color', command=self.chooseBackground)
self.buttonUpdateColor = Button(
rootC, text='Update', command=self.updateColor)
self.title = Label(rootC, text="Select your colors")
self.buttonClose = Button(rootC, text="Close", command=rootC.destroy)
self.buttonBG.pack()
self.title.pack()
self.buttonNegativeCharge.pack()
self.buttonNeutralCharge.pack()
self.buttonPositiveCharge.pack()
self.minNegativeLbl.pack()
self.maxPositiveLbl.pack()
self.scaleLbl.pack()
self.sclSelectNegative.pack()
self.sclSelectPositive.pack()
self.buttonUpdateColor.pack()
self.buttonClose.pack()
def chooseNegativeCharge(self):
self.colorNegative = askcolor(
color=self.cNegative, title="Negative Charge Color")
self.buttonNegativeCharge.config(fg=self.colorNegative[1])
self.cNegative = self.colorNegative[1]
def chooseNeutralCharge(self):
self.colorNeutral = askcolor(
color=self.cNeutral, title="Neutral Charge Color")
self.buttonNeutralCharge.config(fg=self.colorNeutral[1])
self.cNeutral = self.colorNeutral[1]
def choosePositiveCharge(self):
self.colorPositive = askcolor(
color=self.cPositive, title="Positive Charge Color")
self.buttonPositiveCharge.config(fg=self.colorPositive[1])
self.cPositive = self.colorPositive[1]
def chooseBackground(self):
bgcolor = askcolor(
color=self.cPositive, title="Positive Charge Color")
cmd.set_color("bg_chargy_color", bgcolor[0])
cmd.bg_color("bg_chargy_color")
def updateColor(self):
selection = 'all'
stored.atoms_charge = []
stored.atoms_colors = []
cmd.map_new('chargyc_map', selection="(all)")
if not self.colorNeutral:
tkMessageBox.showerror("Error", "Set Neutral Color, Please")
return
if not self.colorNegative:
tkMessageBox.showerror("Error", "Set Negative Color, Please")
return
if not self.colorPositive:
tkMessageBox.showerror("Error", "Set Positive Color, Please")
return
cmd.iterate_state(1, '(' + selection + ')',
'stored.atoms_charge.append(partial_charge)')
_i = 0
minValue = None
maxValue = None
while _i < len(stored.atoms_charge):
color = []
if _i == 0:
maxValue = stored.atoms_charge[_i]
minValue = stored.atoms_charge[_i]
if(stored.atoms_charge[_i] > maxValue):
maxValue = stored.atoms_charge[_i]
if stored.atoms_charge[_i] < minValue:
minValue = stored.atoms_charge[_i]
_i += 1
self.minNegativeLbl["text"] = 'Min Found: ' + str(round(minValue, 3))
self.maxPositiveLbl["text"] = 'Max Found: ' + str(round(maxValue, 3))
if(self.scaleNegative == 0.0 and self.scalePositive == 0.0):
self.scaleNegative = round(minValue, 3)
self.scalePositive = round(maxValue, 3)
self.sclSelectNegative.delete(0, "end")
self.sclSelectPositive.delete(0, "end")
self.sclSelectNegative.insert(0, round(minValue, 3))
self.sclSelectPositive.insert(0, round(maxValue, 3))
else:
self.scaleNegative = float(self.sclSelectNegative.get())
self.scalePositive = float(self.sclSelectPositive.get())
minValue = float(self.sclSelectNegative.get())
maxValue = float(self.sclSelectPositive.get())
self.scaleLbl["text"] = 'Scale: ' + str(
self.scaleNegative) + ' to ' + str(self.scalePositive)
middleValue = 0
if(maxValue < 0):
maxValue = 0
if(minValue > 0):
minValue = 0
_i = 0
while _i < len(stored.atoms_charge):
color = []
cmd.set_color("neutral_color", self.colorNeutral[0])
cmd.set_color("positive_color", self.colorPositive[0])
cmd.set_color("negative_color", self.colorNegative[0])
if(stored.atoms_charge[_i] >= middleValue):
if(stored.atoms_charge[_i] == middleValue):
cmd.set_color(str(_i) + "_color", self.colorNeutral[0])
else:
cmd.set_color(str(_i) + "_color", self.getColor(
self.colorNeutral[0], self.colorPositive[0], maxValue, stored.atoms_charge[_i] if stored.atoms_charge[_i] < maxValue else maxValue))
else:
cmd.set_color(str(_i) + "_color", self.getColor(
self.colorNeutral[0], self.colorNegative[0], abs(minValue), abs(stored.atoms_charge[_i]) if abs(stored.atoms_charge[_i]) < abs(minValue) else abs(minValue)))
index = cmd.get_color_index(str(_i) + "_color")
stored.atoms_colors.append(index)
_i += 1
cmd.alter_state(1, '(' + selection + ')',
"color=stored.atoms_colors.pop(0)")
cmd.ramp_new('chargy_ramp', 'chargyc_map', range=[self.scaleNegative, ((self.scaleNegative+self.scalePositive)/2.0), self.scalePositive],
color=['negative_color', 'neutral_color', 'positive_color'])
def getColor(self, color, colorMax, step, index):
colorStep = [0, 0, 0]
colorStep[0] = ((colorMax[0]-color[0])/step)
colorStep[1] = ((colorMax[1]-color[1])/step)
colorStep[2] = ((colorMax[2]-color[2])/step)
return [
1.0 if (color[0] + (colorStep[0]*index)) /
255.0 >= 1 else (color[0] + (colorStep[0]*index))/255.0,
1.0 if (color[1] + (colorStep[1]*index)) /
255.0 >= 1 else (color[1] + (colorStep[1]*index))/255.0,
1.0 if (color[2] + (colorStep[2]*index)) /
255.0 >= 1 else (color[2] + (colorStep[2]*index))/255.0
]
def create_entry(_main_row_, _desc_txt, _def_txt_, t_len, ckbc=None, fn=None):
''' creates a tkinter entry '''
_row_ = Frame(_main_row_)
if ckbc <> None and fn <> None:
label0 = Label(_row_, width=3, text=" ", anchor='w')
cvar = IntVar()
label1 = Checkbutton(_row_,
width=0,
variable=cvar,
command=fn,
anchor='w')
label2 = Label(_row_, width=t_len, text=_desc_txt + " ", anchor='w')
ckbc.append([cvar, label1])
else:
label0 = Label(_row_, width=3, text=" >", anchor='w')
label1 = Label(_row_, width=t_len, text=_desc_txt, anchor='w')
label2 = Label(_row_, width=2, text=" :", anchor='w')
if type(_def_txt_) == str:
Ent_It = Entry(_row_) #, width=13)
Ent_It.insert('end', _def_txt_)
elif type(_def_txt_) in [list, tuple]:
if type(_def_txt_[1]) in [set]:
_nums_ = [str(x) for x in sorted(list(_def_txt_[1]))]
Ent_It = StringVar()
aux_spin = Spinbox(_row_,
textvariable=Ent_It,
values=tuple(_nums_))
Ent_It.set(_def_txt_[0])
else:
Ent_It = StringVar()
aux_ddl = Drop_Down_List(
_row_,
textvariable=Ent_It,
values=tuple(_def_txt_[1]),
#state = "readonly"
)
aux_ddl.bind("<Key>", lambda e: "break") # Magic
Ent_It.set(_def_txt_[0])
finalspace = Label(_row_, width=5, text=" ", anchor='w')
# Just packing
label0.pack(side='left', padx=1)
label1.pack(side='left', padx=6)
label2.pack(side='left', padx=0)
if type(_def_txt_) == str:
Ent_It.pack(side='left', expand=True, fill=X)
elif type(_def_txt_) in [list, tuple] and type(_def_txt_[1]) == set:
aux_spin.pack(side='left', expand=True, fill=X)
else:
aux_ddl.pack(side='left', expand=True, fill=X)
finalspace.pack(side='right', padx=0)
_row_.pack(side='top', fill=X, pady=3)
# For tracing purposes list appending
return Ent_It
def initUI(self):
self.parent.title("FIND BLR COEFFICIENT VALUE")
self.pack(fill=BOTH, expand=True)
self.columnconfigure(0, weight=1)
# self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
###### GUI Control Variables ######
self.LIMIT_L = IntVar()
self.LIMIT_H = IntVar()
self.PULSE_R = IntVar()
self.PULSE_L = IntVar()
self.pulse_height = DoubleVar()
self.hdf5_file = StringVar()
self.PMT = IntVar()
self.EVENT = IntVar()
self.amplitude_range = DoubleVar()
self.delta = DoubleVar()
self.noise_sigma = DoubleVar()
self.coeff = DoubleVar()
#self.DRAW = BooleanVar()
search = Image.open("next_logo.jpg")
search_temp = search.resize((170, 200), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0, column=0,
columnspan=10, rowspan=10, sticky=E+W+S+N)
self.hdf5_file.set("2052.h5.z")
e1 = Entry(self, textvariable=self.hdf5_file, width=30)
e1.grid(row=1,column=1, sticky=W, columnspan=5, pady=5)
e1_label = Label(self, text="HDF5 file")
e1_label.grid(row=0,column=1,sticky=W, columnspan=5, pady=5)
self.PMT.set("0")
sb1 = Spinbox(self, from_=0, to=12,
width=3, textvariable=self.PMT)
sb1.grid(row=3,column=2, sticky=W)
sb1_label = Label(self, text="PMT")
sb1_label.grid(row=2,column=2, padx=0, sticky=W)
self.EVENT.set("0")
sb1 = Spinbox(self, from_=0, to=1000,
width=5, textvariable=self.EVENT)
sb1.grid(row=3,column=3, sticky=W)
sb1_label = Label(self, text="EVENT")
sb1_label.grid(row=2,column=3, padx=0, sticky=W)
self.LIMIT_L.set("19000")
sb1 = Spinbox(self, from_=0, to=100000,
width=5, textvariable=self.LIMIT_L)
sb1.grid(row=5,column=2, sticky=W)
sb1_label = Label(self, text="ROI Start ")
sb1_label.grid(row=4,column=2, padx=0, sticky=W)
self.LIMIT_H.set("22500")
sb1 = Spinbox(self, from_=0, to=100000,
width=5, textvariable=self.LIMIT_H)
sb1.grid(row=5,column=3, sticky=W)
sb1_label = Label(self, text="ROI End ")
sb1_label.grid(row=4,column=3, padx=0, sticky=W)
self.PULSE_R.set("20142")
sb1 = Spinbox(self, from_=0, to=100000,
width=8, textvariable=self.PULSE_R)
sb1.grid(row=5,column=4, sticky=E)
sb1_label = Label(self, text=" Pulse Rise")
sb1_label.grid(row=4,column=4, padx=0, sticky=E)
self.PULSE_L.set("1200")
sb1 = Spinbox(self, from_=0, to=5000,
width=8, textvariable=self.PULSE_L)
sb1.grid(row=5,column=5, sticky=E)
sb1_label = Label(self, text=" Pulse Length")
sb1_label.grid(row=4,column=5, padx=0, sticky=E)
sb1_label = Label(self, text=" ")
sb1_label.grid(row=2,column=7, padx=0, sticky=W)
sb1_label = Label(self, text=" ")
sb1_label.grid(row=6,column=7, padx=0, sticky=W)
self.pulse_height.set("545.5")
sb1 = Entry(self, width=8, textvariable=self.pulse_height)
sb1.grid(row=7,column=3, sticky=E)
sb1_label = Label(self, text=" Amplitude")
sb1_label.grid(row=6,column=3, padx=0, sticky=E)
self.amplitude_range.set("2")
sb1 = Entry(self, width=8, textvariable=self.amplitude_range)
sb1.grid(row=7,column=4, sticky=E)
sb1_label = Label(self, text=" Loop Range")
sb1_label.grid(row=6,column=4, padx=0, sticky=E)
self.delta.set("0.1")
sb1 = Entry(self, width=8, textvariable=self.delta)
sb1.grid(row=7,column=5, sticky=E)
sb1_label = Label(self, text=" Loop Delta")
sb1_label.grid(row=6,column=5, padx=0, sticky=E)
self.noise_sigma.set("4")
sb1 = Entry(self, width=3, textvariable=self.noise_sigma)
sb1.grid(row=5,column=6, sticky=E)
sb1_label = Label(self, text=" Noise Threshold")
sb1_label.grid(row=4,column=6, padx=0, sticky=E)
sb_coeff_label = Label(self, text= "Coefficient ")
sb_coeff_label.grid(row=0,column=6, padx=0, sticky=E)
self.sb_coeff = Label(self)
self.sb_coeff.grid(row=1,column=6, padx=0, sticky=E)
# MAIN BUTTONS
obtn = Button(self, text="GO!!", command=self.find_C)
obtn.grid(row=14, column=4, sticky=E, pady=10)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=14, column=5, sticky=E, pady=10)
hbtn = Button(self, text="Help", command=self.help_f)
hbtn.grid(row=14, column=0, sticky=W, pady=10)
def initUI(self):
self.parent.title("FIND SPE VALUE")
self.pack(fill=BOTH, expand=True)
self.columnconfigure(0, weight=1)
#self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
self.graph_cb = BooleanVar()
self.bins = IntVar()
self.path = StringVar()
self.n_files = IntVar()
self.start_s = IntVar()
self.end_s = IntVar()
self.guess = IntVar()
search = Image.open("next_logo.jpg")
search_temp = search.resize((160, 200), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0, column=0,
columnspan=10, rowspan=10, sticky=E+W+S+N)
#Number of Files and Bins. Spin Box
self.n_files.set("2000")
sb1 = Spinbox(self, from_=1, to=10000,
width=6, textvariable=self.n_files)
sb1.grid(row=1,column=4, sticky=W)
sb1_label = Label(self, text="Files")
sb1_label.grid(row=1,column=3, padx=5, sticky=E)
self.bins.set("50")
sb2 = Spinbox(self, from_=10, to=200,
width=6, textvariable=self.bins)
sb2.grid(row=1,column=6, sticky=W)
sb2_label = Label(self, text="Hist. Bins")
sb2_label.grid(row=1,column=5, padx=5, sticky=E)
# INTEGRATION LIMITS
Integration_label = Label(self, text="INTEGRATION",
font = "Verdana 12 bold")
Integration_label.grid(row=3,column=4,
padx=5,
columnspan = 2)
self.start_s.set("1732")
sb3 = Spinbox(self, from_=1, to=10000,
width=6, textvariable=self.start_s)
sb3.grid(row=4,column=4, sticky=W)
sb3_label = Label(self, text="StartPoint")
sb3_label.grid(row=4,column=3, padx=5, sticky=E)
self.end_s.set("1752")
sb4 = Spinbox(self, from_=1, to=10000,
width=6, textvariable=self.end_s)
sb4.grid(row=4,column=6, sticky=W)
sb4_label = Label(self, text="EndPoint")
sb4_label.grid(row=4,column=5, padx=5, sticky=E)
sb4_label = Label(self, text="")
sb4_label.grid(row=4,column=7, padx=5, sticky=E)
# FITTING PARAMETERS
Integration_label = Label(self, text="FITTING",
font = "Verdana 12 bold")
Integration_label.grid(row=6,column=4,
padx=5,
columnspan = 2)
self.guess.set("-20")
sb5 = Spinbox(self, from_=-50, to=-1,
width=6, textvariable=self.guess)
sb5.grid(row=7,column=4, sticky=W)
sb5_label = Label(self, text="SPE guess")
sb5_label.grid(row=7,column=5, padx=5, sticky=W)
#Check buttons
cb1 = Checkbutton(self, text="MultiGraph Output", variable=self.graph_cb )
cb1.select()
cb1.grid(row=7,column=6, sticky=W)
#Text Box
#self.path.set("F:/DATOS_DAC/spe_1230/2046/pmt_0_trace_evt_")
self.path.set("spe_1230_2046.h5.z")
e1 = Entry(self, textvariable=self.path, width=45)
e1.grid(row=10,column=3, sticky=W, columnspan=10, padx=10, pady=5)
e1_label = Label(self, text="DataSet path (including name file)")
e1_label.grid(row=9,column=3,sticky=W, columnspan=10, padx=10)
# Main buttons
obtn = Button(self, text="GO!!", command=self.SPE_f)
obtn.grid(row=14, column=5, sticky=E, pady=5)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=14, column=6, sticky=E, pady=5)
hbtn = Button(self, text="Help")
hbtn.grid(row=14, column=0, sticky=W, pady=5)
def initUI(self):
self.parent.title("DBLR for Dummies")
self.pack(fill=BOTH, expand=True)
#self.columnconfigure(0, weight=1)
#self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
self.meas = IntVar()
self.point = IntVar()
self.base_path = StringVar()
self.coef = DoubleVar()
self.noise = DoubleVar()
self.n_sigma = DoubleVar()
self.thr1 = DoubleVar()
self.thr2 = DoubleVar()
self.thr3 = DoubleVar()
self.graph_sw = BooleanVar()
#Image
factor=0.65
search = Image.open("NEXT_official_logo.jpg")
width_org, height_org = search.size
search_temp = search.resize((int(width_org*factor),
int(height_org*factor)), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0, column=4,
columnspan=2, rowspan=3, padx=5)
#self.base_path.set("F:/DATOS_DAC/2052/pmt_0_trace_evt_")
self.base_path.set("Argon.h5.z")
e1 = Entry(self, textvariable=self.base_path, width=40)
e1.grid(row=0,column=1, sticky=W, columnspan=3, pady=5, padx=5)
e1_label = Label(self, text="Path & Name")
e1_label.grid(row=0,column=0, columnspan=1, sticky=E, pady=5, padx=5)
self.point.set("0")
sb1 = Spinbox(self, from_=0, to=100,
width=4, textvariable=self.point)
sb1.grid(row=2,column=1, sticky=W, pady=5, padx=5)
sb1_label = Label(self, text="PMT")
sb1_label.grid(row=2,column=0, padx=5, sticky=E)
self.meas.set("0")
sb1 = Spinbox(self, from_=0, to=100,
width=4, textvariable=self.meas)
sb1.grid(row=2,column=3, sticky=W, pady=5, padx=5)
sb1_label = Label(self, text="Event")
sb1_label.grid(row=2,column=2, padx=5, sticky=E)
#Check buttons
# cb1 = Checkbutton(self, text="New Graph", variable=self.graph_sw)
# cb1.select()
# cb1.grid(row=2,column=2, sticky=W)
#PARAMETERS
Integration_label = Label(self, text="PARAMETERS",
font = "Verdana 12 bold")
Integration_label.grid(row=3,column=1,
padx=5,
columnspan = 2, pady=10, sticky=E)
self.coef.set("1.65E-3")
e2 = Entry(self, width=12, textvariable=self.coef)
e2.grid(row=4,column=1, sticky=W, pady=5, padx=5)
e2_label = Label(self, text="DBLR Coef")
e2_label.grid(row=4,column=0, sticky=E, pady=5, padx=5)
self.noise.set("0.75")
e3 = Entry(self, width=12, textvariable=self.noise)
e3.grid(row=4,column=3, sticky=W, pady=5, padx=5)
e3_label = Label(self, text="Noise (LSB)")
e3_label.grid(row=4,column=2, sticky=E, pady=5, padx=5)
self.n_sigma.set("4")
e4 = Entry(self, width=12, textvariable=self.n_sigma)
e4.grid(row=4,column=5, sticky=W, pady=5, padx=5)
e4_label = Label(self, text="Noise Threshold")
e4_label.grid(row=4,column=4, sticky=E, pady=5, padx=5)
self.thr1.set("0")
e5 = Entry(self, width=12, textvariable=self.thr1)
e5.grid(row=5,column=1, sticky=W, pady=5, padx=5)
e5_label = Label(self, text="Threshold 1")
e5_label.grid(row=5,column=0, sticky=E, pady=5, padx=5)
self.thr2.set("0")
e6 = Entry(self, width=12, textvariable=self.thr2)
e6.grid(row=5,column=3, sticky=W, pady=5, padx=5)
e6_label = Label(self, text="Threshold 2")
e6_label.grid(row=5,column=2, sticky=E, pady=5, padx=5)
self.thr3.set("0")
e7 = Entry(self, width=12, textvariable=self.thr3)
e7.grid(row=5,column=5, sticky=W, pady=5, padx=5)
e7_label = Label(self, text="Threshold 3")
e7_label.grid(row=5,column=4, sticky=E, pady=5, padx=5)
# Main buttons
obtn = Button(self, text="GO!!", command=self.DBLR_f)
obtn.grid(row=6, column=4, sticky=E, pady=10)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=6, column=5, sticky=E, pady=10)
hbtn = Button(self, text="Help", command=self.help_f)
hbtn.grid(row=6, column=0, sticky=W, pady=10)
class UIFrame(Frame):
'''
This class is responsible for creating configuring and laying out all controls on the main GUI window. It returns UIFrame
object (based on Frame) representing the populated window for the application to interact with.
'''
def __init__(self, parent):
'''
Creates and returns a new UIFrame object.
_Parameters_
parent (required) - The parent widget object under which this console is to be created.
_Return_
UIFrame Object
'''
Frame.__init__(self, parent)
self.parent = parent
#Main window frames
self._optionsFrame = Frame(self.parent)
self._runFrame = Frame(self.parent)
self._consoleFrame = Frame(self.parent)
#Member widget creation and configuration - widgets configured in their constructors
self._lblLoopCount = Label(self._optionsFrame,
text = "Loop Count")
self.LoopSpinner = Spinbox(self._optionsFrame,
from_ = 1,
to = 5000,
repeatdelay = 500,
repeatinterval = 50)
self._lblOptions = Label(self._optionsFrame,
text="Options String")
self.OptionsEntry = Entry(self._optionsFrame,
exportselection = False)
self.ClearButton = Button(self._runFrame,
text="Clear")
self.RunButton = Button(self._runFrame,
text="Run!!!")
self.Console = ConsoleFrame(self._consoleFrame)
#Geometry control
#First pack the main window frames
self._optionsFrame.pack(fill = "x")
self._runFrame.pack()
self._consoleFrame.pack(fill = "both",
expand = True,
padx = 2,
pady = 2)
#This line is needed to allow the options column to have the correct width
self._optionsFrame.columnconfigure(1, weight = 1)
#widgets in options frame
self._lblLoopCount.grid(row = 0, column = 0,
sticky = "w",
padx = 2,
pady = 2)
self.LoopSpinner.grid(row = 1, column = 0,
sticky = "w",
padx = 2,
pady = 2)
self._lblOptions.grid(row = 0, column = 1,
sticky = "w",
padx = 2,
pady = 2)
self.OptionsEntry.grid(row = 1, column = 1,
sticky = "e"+"w",
padx = 2,
pady = 2)
#widgets in run frame
self.RunButton.pack(side = "left",
padx = 2,
pady = 2)
self.ClearButton.pack(side = "left",
padx = 2,
pady = 2)
#note - Console frame packed in constructor for console object
#set minimum window size
self.master.update_idletasks()
self.master.minsize(self.master.winfo_width(), self.master.winfo_height())
def __init__(self, master):
self.master = master
master.title(u"Weiterreißwiderstand")
self.big_font = tkFont.Font(family='Helvetica',
size=36, weight='bold')
self.normal_font = tkFont.Font(family='Helvetica',
size=20, weight='normal')
self.X = None
self.Y = None
self.maxima = None
self.maxima_x = None
self.number_max = 0
self.number_max_string = StringVar()
self.max_max = 0.0
self.max_max_string = StringVar()
self.min_max = 0.0
self.min_max_string = StringVar()
self.median = 0.0
self.median_string = StringVar()
self.w_string = StringVar()
self.distance_string = StringVar()
self.method_string = StringVar()
self.sample_file = ''
self.project_file = ''
self.w = 0.0
self.distance = 0.0
#########################################################################
'''
Optionen für Dateidialoge
'''
self.file_opt = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Messung importieren'
self.file_opt2 = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Neues Projekt erstellen.'
self.file_opt3 = options = {}
options['defaultextension'] = '.txt'
options['filetypes'] = [('text files', '.txt')]
options['initialfile'] = ''
options['parent'] = master
options['title'] = 'Vorhandenes Projekt öffnen.'
#####################################################################################################
'''
GUI
'''
'''
MenueLeiste
'''
###############################################################################################
self.menubar = Menu(master)
# create a pulldown menu, and add it to the menu bar
self.filemenu = Menu(self.menubar, tearoff=0)
self.filemenu.add_command(label="Neu", command=self.new_file, font = self.normal_font)
self.filemenu.add_command(label=u"Öffnen...", command=self.open_file, font = self.normal_font)
self.filemenu.add_separator()
self.filemenu.add_command(label="Messung importieren", command=self.get_filepath, font = self.normal_font)
self.filemenu.add_separator()
self.filemenu.add_command(label="Beenden", command=root.quit, font = self.normal_font)
self.menubar.add_cascade(label="Datei", menu=self.filemenu, font = self.normal_font)
self.helpmenu = Menu(self.menubar, tearoff=0)
self.helpmenu.add_command(label="Hilfe", command=self.help, font = self.normal_font)
self.helpmenu.add_command(label=u"Über", command=self.info, font = self.normal_font)
self.menubar.add_cascade(label="Hilfe", menu=self.helpmenu, font = self.normal_font)
master.config(menu=self.menubar)
##############################################################################################
'''
Parameter
'''
self.option_label = ttk.Label(master, text = "Parameter", font = self.big_font)
self.option_label.grid(row = 0, rowspan = 2, columnspan = 4, sticky=W)
self.delta_x_label = ttk.Label(master, text = "Delta X", font = self.normal_font)
self.delta_x_label.grid(row = 3, sticky=W)
self.delta_x_spinbox = Spinbox(master, from_=10, to=500, increment = 10, font = self.normal_font, width = 4, command = self.plot)
self.delta_x_spinbox.grid(row = 3, column = 1)
self.delta_y_label = ttk.Label(master, text = "Delta Y", font = self.normal_font)
self.delta_y_label.grid(row = 4, column = 0, sticky=W)
self.delta_y_spinbox = Spinbox(master, from_=0, to=2, increment = 0.05, font = self.normal_font, width = 4, command = self.plot)
self.delta_y_spinbox.grid(row = 4, column = 1)
# self.plot_button = Button(master, text = "Plotten", font = self.normal_font, command = self.plot, width = 10)
# self.plot_button.grid(row = 3, column = 2, columnspan = 1)
self.sample_thickness_label = ttk.Label(master, text = "Probendicke [mm]", font = self.normal_font)
self.sample_thickness_label.grid(row = 5, column = 0, sticky=W)
self.sample_thickness_entry = ttk.Entry(master, font = self.normal_font, width = 5)
self.sample_thickness_entry.grid(row = 5, column = 1)
self.calculate_button = Button(master, text = "Berechnen", font = self.normal_font, command = self.calculate, width = 10)
self.calculate_button.grid(row = 6, column = 1, columnspan = 1)
##########################################################################################################
'''
Speichern
'''
self.save_label = ttk.Label(master, text = "Auswertung Speichern", font = self.big_font)
self.save_label.grid(row = 7, rowspan = 2, columnspan = 4, sticky=W)
self.sample_name_label = ttk.Label(master, text = "Probenname", font = self.normal_font)
self.sample_name_label.grid(row = 9, sticky=W)
self.sample_name_entry = ttk.Entry(master, font = self.normal_font)
self.sample_name_entry.grid(row = 9, column = 1, columnspan = 3)
self.comment_label = ttk.Label(master, text = "Kommentar", font = self.normal_font)
self.comment_label.grid(row = 10, sticky=W)
self.comment_entry = ttk.Entry(master, font = self.normal_font)
self.comment_entry.grid(row = 10, column = 1, columnspan = 3)
self.save_button = Button(master, text = "Speichern", font = self.normal_font, command = self.save, width = 10)
self.save_button.grid(row = 12, column = 1, columnspan = 2, sticky=W)
##############################################################################################################
'''
Analyse
'''
self.number_max_label = ttk.Label(master, text = "Anzahl Maxima:", font = self.normal_font)
self.number_max_label.grid(row = 9, column = 6, sticky=W)
self.number_max_int_label = ttk.Label(master, textvariable = self.number_max_string, font = self.normal_font)
self.number_max_int_label.grid(row = 9, column = 7)
self.max_max_label = ttk.Label(master, text = "Median [N]:", font = self.normal_font)
self.max_max_label.grid(row = 10, column = 6, sticky=W)
self.max_max_int_label = ttk.Label(master, textvariable = self.median_string, font = self.normal_font)
self.max_max_int_label.grid(row = 10, column = 7)
self.min_max_label = ttk.Label(master, text = u"Weiterreißwiderstand [N/mm]:", font = self.normal_font)
self.min_max_label.grid(row = 11, column = 6, sticky=W)
self.min_max_int_label = ttk.Label(master, textvariable = self.w_string, font = self.normal_font)
self.min_max_int_label.grid(row = 11, column = 7)
self.min_max_label = ttk.Label(master, text = u"Spannweite [mm]:", font = self.normal_font)
self.min_max_label.grid(row = 12, column = 6, sticky=W)
self.min_max_int_label = ttk.Label(master, textvariable = self.distance_string, font = self.normal_font)
self.min_max_int_label.grid(row = 12, column = 7)
self.method_label = ttk.Label(master, text="Methode:", font = self.normal_font)
self.method_label.grid(row = 13, column = 6, sticky=W)
self.method_method_label = ttk.Label(master, textvariable = self.method_string, font = self.normal_font)
self.method_method_label.grid(row = 13, column = 7)
##########################################################################################################
'''
Canvas
'''
# Create a canvas
self.w, self.h = 800, 500
self.canvas = Canvas(master, width=self.w, height=self.h)
self.canvas.grid(row = 0, column = 5, columnspan = 5, rowspan = 9)
'''
class Outlier4dfp(Frame):
def __init__(self,
parent,
filename=None,
filename_roi=None,
filename_csv=None,
dirname=None,
obj_return_value=None):
Frame.__init__(self, parent)
self.parent = parent
self.obj_return_value = obj_return_value
# check filenames
if filename is None or not os.path.isfile(filename):
if dirname is not None:
filename = tkFileDialog.askopenfilename(initialdir=dirname)
else:
filename = tkFileDialog.askopenfilename()
if not os.path.isfile(filename):
parent.destroy()
return
if filename_roi is None or not os.path.isfile(filename_roi):
if dirname is not None:
filename_roi = tkFileDialog.askopenfilename(initialdir=dirname)
else:
filename_roi = tkFileDialog.askopenfilename()
if not os.path.isfile(filename_roi):
parent.destroy()
return
if dirname is None:
self.dirname = os.path.dirname(filename)
else:
self.dirname = dirname
if filename_csv is None:
filename_csv = os.path.join(
self.dirname,
filename_wo_ext(os.path.basename(filename)) + '.csv')
self.filename = filename
self.filename_roi = filename_roi
self.filename_csv = filename_csv
self.dat = nib.load(filename).get_data()
self.shape = self.dat.shape
print self.shape
dz = self.shape[2]
df = self.shape[-1]
self.badenc = np.zeros((dz, df), dtype=np.int16)
self.prev = np.zeros((dz, df), dtype=np.int16)
self.z = 0
self.initUI()
self.run()
#if filename_csv is not None and os.path.isfile(filename_csv):
# self.run_read()
def reset(self):
dz = self.shape[2]
df = self.shape[-1]
self.badenc[:, :] = np.zeros((dz, df), dtype=np.int16)
self.prev[:, :] = np.zeros((dz, df), dtype=np.int16)
def make_checkbox_all(self, frame, width=4, ncol=20):
self.lst_checkbox_slices_values = []
self.lst_checkbox_slices = []
ii = 0
for z in range(self.shape[2]):
self.lst_checkbox_slices_values.append(
[BooleanVar() for f in range(self.shape[3])])
boxes = [
Checkbutton(frame,
text=str('%s' % f),
variable=self.lst_checkbox_slices_values[z][f],
width=width) for f in range(self.shape[3])
]
jj = 0
for f in range(self.shape[3]):
btn = boxes[f]
btn.grid(row=z, column=f)
jj += 1
if ncol is not None and ncol <= jj:
ii += 1
jj = 0
self.lst_checkbox_slices.append(boxes)
if jj > 0:
ii += 1
def make_checkbox(self, frame, width=4, ncol=20):
#self.lst_checkbox_slices_values = [BooleanVar() for f in range(self.shape[3])]
self.lst_checkbox_slices_values = [
IntVar() for f in range(self.shape[3])
]
self.lst_checkbox_slices = [
Checkbutton(frame,
text=str('%s' % f),
variable=self.lst_checkbox_slices_values[f],
width=width,
command=functools.partial(self.click_check, f))
for f in range(self.shape[3])
]
ii = 0
jj = 0
for f in range(self.shape[3]):
btn = self.lst_checkbox_slices[f]
btn.grid(row=ii, column=jj)
jj += 1
if ncol is not None and ncol <= jj:
jj = 0
ii += 1
if jj > 0:
ii += 1
def click_check(self, f):
value = self.lst_checkbox_slices_values[f].get()
if value == 1:
value = 0
else:
value = 1
self.lst_checkbox_slices_values[f].set(value)
self.badenc[self.z, f] = value
print self.z, f, self.badenc[self.z, f]
def set_z(self, z=None):
if z is None:
z = self.z
else:
self.z = z
for i in range(len(self.lst_checkbox_slices_values)):
chkbox = self.lst_checkbox_slices_values[i]
# FIXME
# avail chkbox
if self.prev[z, i] > 0 or self.badenc[z, i] > 0:
to_check = True
to_check = 1
self.lst_checkbox_slices[i].select()
else:
to_check = False
to_check = 0
self.lst_checkbox_slices[i].deselect()
chkbox.set(to_check)
# avail
def run(self):
dat = self.dat
roi = nib.load(self.filename_roi).get_data().astype(bool)
print dat.shape
print roi.shape
dz = self.shape[2]
df = self.shape[3]
self.values = np.zeros((dz, df), dtype=dat.dtype)
for z in range(dz):
for f in range(df):
self.values[z, f] = dat[:, :, z, f][roi[:, :, z]].mean()
self.draw_slice()
def draw_slice(self):
z = self.z
df = self.shape[3]
print z
#r = self.frame_graph.axes.boxplot(self.values.T)
sorted_values = np.sort(self.values[z, :])
q1 = sorted_values[df / 4]
q2 = sorted_values[df / 2]
q3 = sorted_values[df - df / 4]
iqr = q3 - q1
#if1 = q1 - 1.5*iqr
#if2 = q3 + 1.5*iqr
of1 = q1 - 3 * iqr
of2 = q3 + 3 * iqr
xx = np.arange(df)
z_mean = self.values[z, :].mean()
z_std = self.values[z, :].std()
#z_min = self.values[z,:].min()
#z_max = self.values[z,:].max()
#self.frame_graph.axes.hold(False)
self.frame_graph.axes.clear()
self.frame_graph.axes.plot([0, df], [z_mean, z_mean], 'k-')
#self.frame_graph.axes.hold(True)
self.frame_graph.axes.plot([0, df],
[z_mean + 1 * z_std, z_mean + 1 * z_std],
'y--')
self.frame_graph.axes.plot([0, df],
[z_mean + 2 * z_std, z_mean + 2 * z_std],
'g--')
self.frame_graph.axes.plot([0, df],
[z_mean + 3 * z_std, z_mean + 3 * z_std],
'b--')
self.frame_graph.axes.plot([0, df], [of2, of2], 'r-')
for f in range(df):
if self.prev[z, f] > 0:
self.frame_graph.axes.plot(f, self.values[z, f], 'ko')
self.frame_graph.axes.text(f + 0.2, self.values[z, f], str(f))
elif of1 < self.values[z, f] < of2:
#if self.values[z,f] < z_mean + 3*z_std:
self.frame_graph.axes.plot(f, self.values[z, f], 'bo')
if self.values[z, f] > z_mean + 3 * z_std:
self.frame_graph.axes.text(f + 0.2, self.values[z, f],
str(f))
else:
self.frame_graph.axes.plot(f, self.values[z, f], 'ro')
self.frame_graph.axes.text(f + 0.2, self.values[z, f], str(f))
self.frame_graph.draw()
self.set_z(z)
def run_read(self):
filename = tkFileDialog.askopenfilename(initialdir=self.dirname)
if filename == '':
return
with open(filename) as f:
values = [[int(tmp) for tmp in line.strip().split(',')]
for line in f.readlines()]
self.prev[:, :] = values
def run_save(self):
filename = tkFileDialog.asksaveasfilename(
initialdir=os.path.dirname(self.filename_csv),
initialfile=os.path.basename(self.filename_csv))
if filename == '':
return
dz = self.shape[2]
df = self.shape[-1]
badenc = self.badenc.copy()
badenc[self.prev > 0] = 1
with open(filename, 'w') as f:
for z in range(dz):
f.write('%s\n' % (','.join([str(tmp)
for tmp in badenc[z, :]])))
with open(os.path.join(self.dirname, 'badenc.dat'), 'wb') as fout:
if False:
for z in range(dz):
row = struct.pack('i' * df, *badenc[z, :])
fout.write(row)
fout.write('%s %s\n' % (dz, df))
for z in range(dz):
row = ' '.join(str(tmp) for tmp in badenc[z, :])
fout.write('%s\n' % row)
if self.obj_return_value is not None:
self.obj_return_value.delete(0, len(self.obj_return_value.get()))
self.obj_return_value.insert(0, filename)
def initUI(self):
self.frame_top = Frame(self)
self.frame_graph = MplCanvas(self)
self.frame_bottom = Frame(self)
Label(self.frame_top, text='Z = ').pack(side=LEFT)
self.spin_z = Spinbox(self.frame_top,
from_=0,
to=self.shape[2] - 1,
increment=1,
command=self.change_z)
self.spin_z.pack(side=LEFT)
self.make_checkbox(self.frame_bottom, width=4)
Label(self.frame_top, text=' CSV').pack(side=LEFT)
self.txt_filename_csv = Entry(self.frame_top)
self.txt_filename_csv.pack(side=LEFT)
self.button_read = Button(self.frame_top,
text='Read',
command=self.run_read)
self.button_read.pack(side=LEFT)
self.button_save = Button(self.frame_top,
text='Save',
command=self.run_save)
self.button_save.pack(side=LEFT)
Label(self.frame_top, text=' ').pack(side=LEFT)
button_reset = Button(self.frame_top, text='Reset',
command=self.reset).pack(side=LEFT)
self.frame_top.pack(side=TOP)
self.frame_graph.get_tk_widget().pack(fill=BOTH, expand=TRUE)
self.frame_bottom.pack(fill=BOTH, expand=TRUE)
self.pack(fill=BOTH, expand=True)
def change_z(self):
self.z = int(self.spin_z.get())
self.draw_slice()
def reset_box(self, box, text):
box.delete(0, len(box.get()))
box.insert(0, text)
def run(self): # run the whole app
self.root = tk.Tk()
self.root2 = tk.Tk()
self.root3 = tk.Tk()
self.root.title('Keyboard Simulation')
# keyboard setup
self.canvas = tk.Canvas(self.root,
width=self.winWidth,
height=self.winHeight)
self.canvas.pack(side=LEFT)
#
self.S = Scrollbar(self.root2)
self.T = Text(self.root2, height=4, width=50)
self.S.pack(side=RIGHT, fill=Y, expand=True)
self.T.pack(side=LEFT, fill=Y, expand=True)
#self.S.pack()
#self.T.pack()
self.S.config(command=self.T.yview)
self.T.config(yscrollcommand=self.S.set)
self.T.delete(1.0, END)
self.T.insert(END, self.inputText)
self.T.see(END)
l = Label(self.root3, text="Hover time Limit:", state='disabled')
l.pack()
w = Spinbox(self.root3, from_=0, to=10)
w.pack()
w.delete(0, "end")
w.insert(0, 4)
l2 = Label(self.root3, text="Hover select progress:")
l2.pack()
self.progress = ttk.Progressbar(self.root3,
orient="horizontal",
length=200,
mode="determinate")
self.progress["value"] = 0
self.progress["maximum"] = 10
self.progress.pack()
def hv_toggle():
if self.hv_btn.config('text')[-1] == "Hover Select: On":
self.hv_btn.config(text="Hover Select: off")
self.hoverOn = not self.hoverOn
else:
self.hv_btn.config(text="Hover Select: On")
self.hoverOn = not self.hoverOn
self.hv_btn = tk.Button(self.root3,
text="Hover Select: On",
command=hv_toggle)
self.hv_btn.pack()
def ck_toggle():
if self.ck_btn.config('text')[-1] == "Click Select: On":
self.ck_btn.config(text="Click Select: off")
self.clickOn = not self.clickOn
else:
self.ck_btn.config(text="Click Select: On")
self.clickOn = not self.clickOn
self.ck_btn = tk.Button(self.root3,
text="Click Select: On",
command=ck_toggle)
self.ck_btn.pack()
#self.hoverlimit = int(w.get())
if self.clickOn:
self.root.bind('<Button-1>', self.clickEvent)
def timerFired():
try:
self.hoverlimit = int(w.get())
except:
pass
self.progress["value"] = self.progress[
"maximum"] * self.hoverDt / self.hoverlimit
self.lightUpHovering()
self.movementLogging()
if self.hoverOn:
self.hoverSelect()
self.redrawAll()
self.canvas.after(self.dt, timerFired)
self.appStartTime = time.time()
timerFired()
self.root.protocol("WM_DELETE_WINDOW", self.exitEvent)
self.root2.protocol("WM_DELETE_WINDOW", self.exitEvent)
self.root3.protocol("WM_DELETE_WINDOW", self.exitEvent)
self.root.mainloop() # This call BLOCKS
self.root2.mainloop()
self.root3.mainloop()
