def hci_cc(adapter: int, ps4btaddr: str) -> None:
import bluetooth._bluetooth as _bt
try:
hci_sock = _bt.hci_open_dev(adapter)
# Get bytes from bluetooth address
baps4addr = bytearray.fromhex(ps4btaddr.replace(":", ""))
baps4addr.reverse()
# HCI CONNECT
# BLUETOOTH SPECIFICATION Version 5.0 | Vol 2, Part E page 774
# https://github.com/pauloborges/bluez/blob/master/tools/hcitool.c => cmd_cc
# https://github.com/pauloborges/bluez/blob/master/lib/hci.c => hci_create_connection
cmd_pkt = bytes(
baps4addr
) + bytes([ # Target BTADDR on 6 bytes reverse order,
0x18,
0xCC, # pkt_type HCI_DM1 | HCI_DM3 | HCI_DM5 | HCI_DH1 | HCI_DH3 | HCI_DH5
0x02, # pscan_rep_mode
0x00, # pscan_mode (reserved)
0x00,
0x00, # clock_offset
0x01
]) # role_switch
# Send HCI request
_bt.hci_send_req(hci_sock, _bt.OGF_LINK_CTL, _bt.OCF_CREATE_CONN,
_bt.EVT_CONN_COMPLETE, 1000, cmd_pkt)
hci_sock.close()
except _bt.error as e:
raise BluetoothError(*e.args)
def bcm_write_local_bdaddr(adapter: int, dsbtaddr: str) -> None:
import bluetooth._bluetooth as _bt
try:
# Open hci socket
hci_sock = _bt.hci_open_dev(adapter)
# Get bytes from bluetooth address
baddrtospoof = bytearray.fromhex(dsbtaddr.replace(":", ""))
baddrtospoof.reverse()
# Send HCI request
cmd_pkt = bytes(baddrtospoof)
# BCM WRITE ADDR command
# https://github.com/pauloborges/bluez/blob/master/tools/bdaddr.c
_bt.hci_send_req(
hci_sock,
_bt.OGF_VENDOR_CMD,
0x0001, #OCF_BCM_WRITE_BD_ADDR
0x00000000,
1000,
cmd_pkt)
hci_sock.close()
except _bt.error as e:
raise BluetoothError(*e.args)
def getRSSI(self):
"""Detects whether the device is near by or not"""
addr = self.address
# Open hci socket
hci_sock = bt.hci_open_dev()
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(10)
result = bt_sock.connect_ex((addr, 1)) # PSM 1 - Service Discovery
try:
# Get ConnInfo
reqstr = struct.pack("6sB17s", bt.str2ba(addr), bt.ACL_LINK, "\0" * 17)
request = array.array("c", reqstr )
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
# Get RSSI
cmd_pkt=struct.pack('H', handle)
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
rssi = struct.unpack('b', rssi[3])[0]
# Close sockets
bt_sock.close()
hci_sock.close()
return rssi
except Exception, e:
return None
def get_RSSI(addr):
# Open an hci socket
hci_sock = bluez.hci_open_dev()
hci_fd = hci_sock.fileno()
# Try to open a connection to remote BT device
try:
bt_sock = bluez.SDPSession()
bt_sock.connect(addr)
except:
bt_sock.close()
hci_sock.close()
return None
# Get handle to ACL connection to remote BT device
reqstr = struct.pack("6sB17s", bluez.str2ba(addr), bluez.ACL_LINK,
"\0" * 17)
request = array.array("c", reqstr)
fcntl.ioctl(hci_fd, bluez.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
# Get RSSI
cmd_pkt = struct.pack('H', handle)
RSSI = bluez.hci_send_req(hci_sock, bluez.OGF_STATUS_PARAM,
bluez.OCF_READ_RSSI, bluez.EVT_CMD_COMPLETE, 4,
cmd_pkt)
RSSI = struct.unpack('b', RSSI[3])[0]
bt_sock.close()
hci_sock.close()
return RSSI
def bluetooth_rssi(addr):
# Open hci socket
hci_sock = bt.hci_open_dev()
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(10)
result = bt_sock.connect_ex((addr, 1)) # PSM 1 - Service Discovery
try:
# Get ConnInfo
reqstr = struct.pack("6sB17s", bt.str2ba(addr), bt.ACL_LINK, "\0" * 17)
request = array.array("c", reqstr )
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
# Get RSSI
cmd_pkt=struct.pack('H', handle)
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
rssi = struct.unpack('b', rssi[3])[0]
# Close sockets
bt_sock.close()
hci_sock.close()
return rssi
except:
return None
def get_rssi(self):
"""Gets the current RSSI value.
@return: The RSSI value (float) or None if the device connection fails
(i.e. the device is nowhere nearby).
"""
try:
self.connect()
if not self.connected:
return -99
if self.cmd_pkt is None:
self.prep_cmd_pkt()
# Send command to request RSSI
rssi = bt.hci_send_req(self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4,
self.cmd_pkt)
rssi_int = rssi[3]
rssi_bytes = rssi_int.to_bytes((rssi_int.bit_length() + 7) // 8,
'big')
rssi = struct.unpack('b', rssi_bytes)[0]
return rssi
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
return -99
except struct.error:
# Invalid RSSI value returned
return None
def getRSSI(self):
"""Detects whether the device is near by or not using RSSI"""
addr = self.address
# Open hci socket
hci_sock = bt.hci_open_dev()
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(10)
result = bt_sock.connect_ex((addr, 1)) # PSM 1 - Service Discovery
try:
# Get ConnInfo
reqstr = struct.pack("6sB17s", bt.str2ba(addr), bt.ACL_LINK, "\0" * 17)
request = array.array("c", reqstr )
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
# Get RSSI
cmd_pkt=struct.pack('H', handle)
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
rssi = struct.unpack('b', rssi[3])[0]
# Close sockets
bt_sock.close()
hci_sock.close()
return rssi
except Exception, e:
#self.logger.error("<Bluetooth> (getRSSI) %s" % (repr(e)))
return None
def request_rssi(self):
"""Request the current RSSI value.
@return: The RSSI value or None if the device connection fails
(i.e. the device is not in range).
"""
try:
# If socket is closed, return nothing
if self.closed:
return None
# Only do connection if not already connected
if not self.connected:
self.connect()
# Command packet prepared each iteration to allow disconnect to trigger IOError
self.prep_cmd_pkt()
# print('cmd packet is {}'.format(self.cmd_pkt))
# Send command to request RSSI
rssi = bt.hci_send_req(
self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, self.cmd_pkt)
if len(rssi) < 4:
print('RSSI IS NONE')
return None
rssi = struct.unpack('b', rssi[3].to_bytes(1, 'big'))
return rssi
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
# Socket recreated to allow device to successfully reconnect
self.bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
return None
def bluetooth_rssi(addr):
# Open hci socket
hci_sock = bt.hci_open_dev()
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(10)
result = bt_sock.connect_ex((addr, 1)) # PSM 1 - Service Discovery
try:
# Get ConnInfo
reqstr = struct.pack('6sB17s', bt.str2ba(addr), bt.ACL_LINK, '\0' * 17)
request = array.array('c', reqstr )
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack('8xH14x', request.tostring())[0]
# Get RSSI
cmd_pkt=struct.pack('H', handle)
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
rssi = struct.unpack('b', rssi[3])[0]
# Close sockets
bt_sock.close()
hci_sock.close()
return rssi
except:
return None
def get_rssi(self):
"""Gets the current RSSI value.
@return: The RSSI value (float) or None if the device connection fails
(i.e. the device is nowhere nearby).
"""
try:
# Only do connection if not already connected
if not self.connected:
self.connect()
if self.cmd_pkt is None:
self.prep_cmd_pkt()
# Send command to request RSSI
rssi = bt.hci_send_req(
self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, self.cmd_pkt)
if sys.version_info < (3, 0, 0):
rssi = struct.unpack('b', rssi[3])[0]
else:
rssi = struct.unpack('b', rssi[3].to_bytes(1, 'big'))[0]
return rssi
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
return None
def get_rssi(self):
"""Gets the current RSSI value.
@return: The RSSI value (float) or None if the device connection fails
(i.e. the device is nowhere nearby).
"""
try:
# Only do connection if not already connected
if not self.connected:
self.connect()
if self.cmd_pkt is None:
self.prep_cmd_pkt()
# Send command to request RSSI
rssi = bt.hci_send_req(
self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, self.cmd_pkt)
# print("RSSI:")
if len(rssi) != 4: # case when the pair just turned off the bluetooth
return None
rssi = struct.unpack('4b',rssi)
return rssi[3]
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
return None
def get_RSSI(addr):
# Open an hci socket
hci_sock = bluez.hci_open_dev()
hci_fd = hci_sock.fileno ()
# Try to open a connection to remote BT device
try:
bt_sock = bluez.SDPSession ()
bt_sock.connect(addr)
except:
bt_sock.close()
hci_sock.close()
return None
# Get handle to ACL connection to remote BT device
reqstr = struct.pack ("6sB17s", bluez.str2ba (addr),
bluez.ACL_LINK, "\0" * 17)
request = array.array ("c", reqstr)
fcntl.ioctl (hci_fd, bluez.HCIGETCONNINFO, request, 1)
handle = struct.unpack ("8xH14x", request.tostring ())[0]
# Get RSSI
cmd_pkt=struct.pack('H', handle)
RSSI = bluez.hci_send_req(hci_sock, bluez.OGF_STATUS_PARAM,
bluez.OCF_READ_RSSI,
bluez.EVT_CMD_COMPLETE, 4, cmd_pkt)
RSSI = struct.unpack('b', RSSI[3])[0]
bt_sock.close()
hci_sock.close()
return RSSI
def get_rssi(self):
"""Gets the current RSSI value.
@return: The RSSI value (float) or None if the device connection fails
(i.e. the device is nowhere nearby).
"""
try:
# Only do connection if not already connected
if not self.connected:
self.connect()
if self.cmd_pkt is None:
self.prep_cmd_pkt()
# Send command to request RSSI
rssi = bt.hci_send_req(self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4,
self.cmd_pkt)
#print(rssi)
#uint8_t status = get_u8(data);
#+ uint16_t handle = get_le16(data + 1);
#+ int8_t rssi = get_s8(data + 3);
(rssi, ) = struct.unpack('xxxb', rssi)
return rssi
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
return None
def get_rssi(self):
"""Gets the current RSSI value.
@return: The RSSI value (float) or None if the device connection fails
(i.e. the device is nowhere nearby).
"""
try:
# Only do connection if not already connected
if not self.connected:
self.connect()
if self.cmd_pkt is None:
self.prep_cmd_pkt()
# Send command to request RSSI
rssi = bt.hci_send_req(
self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, self.cmd_pkt)
retVal = None
if rssi[3] > 0 and rssi[3] <= 256:
retVal = -(256 - rssi[3])
if rssi[3] == 0:
retVal = rssi[3]
print("rssi %d retval " % rssi[3],retVal)
return retVal
except IOError:
# Happens if connection fails (e.g. device is not in range)
self.connected = False
return None
def setupSCO():
# check voice settings. switch to S16 LE mono 8kHz CVSD if needed
hci_sock = bt.hci_open_dev()
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL,
bt.OCF_READ_VOICE_SETTING, bt.EVT_CMD_COMPLETE,
3)
status, voice_setting = struct.unpack("<BH", response)
if voice_setting != 0x60:
new_vs = struct.pack("<H", 0x60)
bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL, bt.OCF_WRITE_VOICE_SETTING,
bt.EVT_CMD_COMPLETE, 1, new_vs)
# determine the maximun packet size
response = bt.hci_send_req(hci_sock, bt.OGF_INFO_PARAM,
bt.OCF_READ_BUFFER_SIZE, bt.EVT_CMD_COMPLETE, 8)
status, acl_mtu, sco_mtu, acl_nbufs, sco_nbufs = struct.unpack(
">BHBHH", response)
return acl_mtu, sco_mtu, acl_nbufs, sco_nbufs
def setupSCO():
# check voice settings. switch to S16 LE mono 8kHz CVSD if needed
hci_sock=bt.hci_open_dev()
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL,
bt.OCF_READ_VOICE_SETTING, bt.EVT_CMD_COMPLETE, 3)
status, voice_setting = struct.unpack("<BH", response)
if voice_setting != 0x60:
new_vs = struct.pack("<H", 0x60)
bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL,
bt.OCF_WRITE_VOICE_SETTING,
bt.EVT_CMD_COMPLETE, 1, new_vs)
# determine the maximun packet size
response = bt.hci_send_req(hci_sock, bt.OGF_INFO_PARAM,
bt.OCF_READ_BUFFER_SIZE, bt.EVT_CMD_COMPLETE, 8)
status, acl_mtu, sco_mtu, acl_nbufs, sco_nbufs = struct.unpack(
">BHBHH", response)
return acl_mtu, sco_mtu, acl_nbufs, sco_nbufs
def write_flush_timeout( addr, timeout ):
hci_sock = bt.hci_open_dev()
# get the ACL connection handle to the remote device
handle = __get_acl_conn_handle(hci_sock, addr)
pkt = struct.pack("HH", handle, bt.htobs(timeout))
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL,
0x0028, bt.EVT_CMD_COMPLETE, 3, pkt)
status = struct.unpack("B", response[0])[0]
rhandle = struct.unpack("H", response[1:3])[0]
assert rhandle == handle
assert status == 0
def write_flush_timeout(addr, timeout):
hci_sock = bt.hci_open_dev()
# get the ACL connection handle to the remote device
handle = __get_acl_conn_handle(hci_sock, addr)
pkt = struct.pack("HH", handle, bt.htobs(timeout))
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL, 0x0028,
bt.EVT_CMD_COMPLETE, 3, pkt)
status = struct.unpack("B", response[0])[0]
rhandle = struct.unpack("H", response[1:3])[0]
assert rhandle == handle
assert status == 0
def read_flush_timeout( addr ):
hci_sock = bt.hci_open_dev()
# get the ACL connection handle to the remote device
handle = __get_acl_conn_handle(hci_sock, addr)
pkt = struct.pack("H", handle)
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL,
0x0027, bt.EVT_CMD_COMPLETE, 5, pkt)
status = struct.unpack("B", response[0])[0]
rhandle = struct.unpack("H", response[1:3])[0]
assert rhandle == handle
assert status == 0
fto = struct.unpack("H", response[3:5])[0]
return fto
def read_flush_timeout(addr):
hci_sock = bt.hci_open_dev()
# get the ACL connection handle to the remote device
handle = __get_acl_conn_handle(hci_sock, addr)
pkt = struct.pack("H", handle)
response = bt.hci_send_req(hci_sock, bt.OGF_HOST_CTL, 0x0027,
bt.EVT_CMD_COMPLETE, 5, pkt)
status = struct.unpack("B", response[0])[0]
rhandle = struct.unpack("H", response[1:3])[0]
assert rhandle == handle
assert status == 0
fto = struct.unpack("H", response[3:5])[0]
return fto
def tryToConnect(MAC,BLEtimeout,devId):
ret = {"signal": -999, "txPower": -999,"flag0ok":0,"byte2":0}
try:
for ii in range(5): # wait until (wifi) sending is finsihed
if os.path.isfile(G.homeDir + "temp/sending"):
#print "delaying hci"
time.sleep(0.5)
else:
break
hci_sock = bt.hci_open_dev(devId)
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(BLEtimeout)
try:
result = bt_sock.connect_ex((MAC, 1)) # PSM 1 - Service Discovery
reqstr = struct.pack("6sB17s", bt.str2ba(MAC), bt.ACL_LINK, "\0" * 17)
request = array.array("c", reqstr)
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
cmd_pkt=struct.pack('H', handle)
# Send command to request RSSI
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM, bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
bt_sock.close()
hci_sock.close()
flag0ok = struct.unpack('b', rssi[0])[0]
txPower = struct.unpack('b', rssi[1])[0]
byte2 = struct.unpack('b', rssi[2])[0]
signal = struct.unpack('b', rssi[3])[0]
#print MAC, test0, txPower, test2, signal
ret["flag0ok"] = flag0ok
ret["byte2"] = byte2
if flag0ok == 0 and not (txPower == signal and signal == 0 ):
ret["signal"] = signal
ret["txPower"] = txPower
except IOError:
# Happens if connection fails (e.g. device is not in range)
bt_sock.close()
hci_sock.close()
except Exception, e:
U.toLog(-1, u"in Line '%s' has error='%s'" % (sys.exc_traceback.tb_lineno, e))
print u"in Line '%s' has error='%s'" % (sys.exc_traceback.tb_lineno, e)
def tryToConnect(MAC,BLEtimeout,devId):
ret = {"signal": -999, "txPower": -999,"flag0ok":0,"byte2":0}
try:
for ii in range(5): # wait until (wifi) sending is finsihed
if os.path.isfile(G.homeDir + "temp/sending"):
#print "delaying hci"
time.sleep(0.5)
else:
break
hci_sock = bt.hci_open_dev(devId)
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(BLEtimeout)
try:
result = bt_sock.connect_ex((MAC, 1)) # PSM 1 - Service Discovery
reqstr = struct.pack("6sB17s", bt.str2ba(MAC), bt.ACL_LINK, "\0" * 17)
request = array.array("c", reqstr)
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
handle = struct.unpack("8xH14x", request.tostring())[0]
cmd_pkt=struct.pack('H', handle)
# Send command to request RSSI
rssi = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM, bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4, cmd_pkt)
bt_sock.close()
hci_sock.close()
flag0ok = struct.unpack('b', rssi[0])[0]
txPower = struct.unpack('b', rssi[1])[0]
byte2 = struct.unpack('b', rssi[2])[0]
signal = struct.unpack('b', rssi[3])[0]
#print MAC, test0, txPower, test2, signal
ret["flag0ok"] = flag0ok
ret["byte2"] = byte2
if flag0ok == 0 and not (txPower == signal and signal == 0 ):
ret["signal"] = signal
ret["txPower"] = txPower
except IOError:
# Happens if connection fails (e.g. device is not in range)
bt_sock.close()
hci_sock.close()
except Exception, e:
U.toLog(-1, u"in Line '%s' has error='%s'" % (sys.exc_traceback.tb_lineno, e))
print u"in Line '%s' has error='%s'" % (sys.exc_traceback.tb_lineno, e)
def bluetooth_rssi(addr):
# Open hci socket
hci_sock = bt.hci_open_dev()
hci_fd = hci_sock.fileno()
# Connect to device (to whatever you like)
bt_sock = bluetooth.BluetoothSocket(bluetooth.L2CAP)
bt_sock.settimeout(5)
#
try:
#Get result
result = bt_sock.connect((addr, 1)) # PSM 1 - Service Discovery
# Get ConnInfo
#Construct request to bit value
reqstr = struct.pack("6sB17s", bt.str2ba(addr), bt.ACL_LINK, "\0" * 17)
#request into array
request = array.array("c", reqstr)
#hamdler creation
handle = fcntl.ioctl(hci_fd, bt.HCIGETCONNINFO, request, 1)
#unback request to handler
handle = struct.unpack("8xH14x", request.tostring())[0]
# Get RSSI
#Handler into command body
cmd_pkt = struct.pack('H', handle)
#recive request
result = bt.hci_send_req(hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4,
cmd_pkt)
#get rssi to
rssi = struct.unpack('b', result[3])[0]
# Close sockets
bt_sock.close()
hci_sock.close()
return rssi
except:
#print("Error")
return None
def get_rssi(self):
#Gets the RSSI value
try:
# Only do connection if not already connected
if not self.connected:
self.connect()
if self.cmd_pkt is None:
self.prepare_command()
# Send command to request RSSI
rssi = bt.hci_send_req(self.hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE, 4,
self.cmd_pkt)
rssi = struct.unpack('b', rssi[3:4])[0]
return rssi
except IOError as ioerr:
# Happens if connection fails
#LOGGER.debug("I/O error: {0}".format(ioerr))
self.connected = False
return None
def get_rssi(self):
try:
# noinspection PyPep8Naming
READ_RSSI_RP_SIZE = 4
if not self._connected:
self.connect()
if self._cmd_pkt is None:
self._prep_cmd_pkt()
_rssi = bt.hci_send_req(self._hci_sock, bt.OGF_STATUS_PARAM,
bt.OCF_READ_RSSI, bt.EVT_CMD_COMPLETE,
READ_RSSI_RP_SIZE, self._cmd_pkt)
_rssi = struct.unpack('b', _rssi[3].to_bytes(1, 'big'))
_rssi = _rssi[0]
if _rssi is not None:
return float(_rssi)
self._connected = False
return None
except IOError:
self._connected = False
return None
def hci_read_local_version_compid(adapter: int) -> int:
import bluetooth._bluetooth as _bt
try:
hci_sock = _bt.hci_open_dev(adapter)
res = _bt.hci_send_req(hci_sock, _bt.OGF_INFO_PARAM,
_bt.OCF_READ_LOCAL_VERSION,
_bt.EVT_CONN_COMPLETE, 9)
hci_sock.close()
# Check first byte.
# See read_local_version_rp.status
# 0 if OK or ERRNO if an error has been raised
if res[0]:
# Invalid response
return -1
return int.from_bytes(res[5:7], byteorder='little', signed=False)
except _bt.error as e:
raise BluetoothError(*e.args)
def get_tx_power(self):
try:
# noinspection PyPep8Naming
READ_TRANSMIT_POWER_LEVEL_RP_SIZE = 4
if not self._connected:
self.connect()
if self._cmd_pkt is None:
self._prep_cmd_pkt()
_tx_power = bt.hci_send_req(self._hci_sock, bt.OGF_HOST_CTL,
bt.OCF_READ_TRANSMIT_POWER_LEVEL,
bt.EVT_CMD_COMPLETE,
READ_TRANSMIT_POWER_LEVEL_RP_SIZE,
self._cmd_pkt)
_tx_power = struct.unpack('b', _tx_power[3].to_bytes(1, 'big'))[0]
if _tx_power is not None:
return float(_tx_power)
self._connected = False
return None
except IOError:
self._connected = False
return None
def send_req(socket, group_field, command_field, event, rlen, params, timeout):
"""Send hci request to device."""
return bluez.hci_send_req(socket, group_field, command_field, event, rlen, params, timeout)
baddr = sys.argv[1].split(":")
# Open hci socket
sock = bt.hci_open_dev(0)
# CSR vendor command to change address
cmd = [ "\xc2", "\x02", "\x00", "\x0c", "\x00", "\x11",
"\x47", "\x03", "\x70", "\x00", "\x00", "\x01",
"\x00", "\x04", "\x00", "\x00", "\x00", "\x00",
"\x00", "\x00", "\x00", "\x00", "\x00", "\x00",
"\x00" ]
# Set new addr in hex
cmd[17] = baddr[3].decode("hex")
cmd[19] = baddr[5].decode("hex")
cmd[20] = baddr[4].decode("hex")
cmd[21] = baddr[2].decode("hex")
cmd[23] = baddr[1].decode("hex")
cmd[24] = baddr[0].decode("hex")
# Send HCI request
bt.hci_send_req(sock,
bt.OGF_VENDOR_CMD,
0,
bt.EVT_VENDOR,
2000,
"".join(cmd))
sock.close()
print "Dont forget to reset your device"
# Split bluetooth address into it's bytes
baddr = sys.argv[1].split(":")
# Open hci socket
sock = bt.hci_open_dev(1)
# CSR vendor command to change address
cmd = [
b"\xc2", b"\x02", b"\x00", b"\x0c", b"\x00", b"\x11", b"\x47", b"\x03",
b"\x70", b"\x00", b"\x00", b"\x01", b"\x00", b"\x04", b"\x00", b"\x00",
b"\x00", b"\x00", b"\x00", b"\x00", b"\x00", b"\x00", b"\x00", b"\x00",
b"\x00"
]
# Set new addr in hex
decode_hex = codecs.getdecoder("hex_codec")
cmd[17] = decode_hex(baddr[3])[0]
cmd[19] = decode_hex(baddr[5])[0]
cmd[20] = decode_hex(baddr[4])[0]
cmd[21] = decode_hex(baddr[2])[0]
cmd[23] = decode_hex(baddr[1])[0]
cmd[24] = decode_hex(baddr[0])[0]
# Send HCI request
bt.hci_send_req(sock, bt.OGF_VENDOR_CMD, 0, bt.EVT_VENDOR, 2000, b"".join(cmd))
sock.close()
print("Dont forget to reset your device")
