def parse_dtb_node_interrupts(node, max_num_interrupts):
interrupts = node.get('interrupts')
is_extended_interrupts = False
if interrupts is None:
interrupts = node.get('interrupts_extended')
is_extended_interrupts = True
irq_set = []
if interrupts is not None:
if is_extended_interrupts:
num_interrupts = len(interrupts) // 4
else:
num_interrupts = len(interrupts) // 3
if max_num_interrupts != -1 and num_interrupts > max_num_interrupts:
raise TemplateError(
'Device has more than %d interrupts, this is more than we can support.'
) % (max_num_interrupts)
for i in range(0, num_interrupts):
if is_extended_interrupts:
_irq = interrupts[i * 3 + 2]
_irq_spi = interrupts[i * 3 + 1]
else:
_irq = interrupts[i * 3 + 1]
_irq_spi = interrupts[i * 3 + 0]
if (isinstance(_irq_spi, numbers.Integral) and (_irq_spi == 0)):
_irq = _irq + 32
irq_set.append(_irq)
return irq_set
def get_perm(configuration, instance_name, interface_name):
'''Fetch a valid permission string'''
perm = configuration[instance_name].get('%s_access' % interface_name)
if not perm:
perm = "RWXP"
elif not re.match('^R?W?X?P?$', perm):
raise (TemplateError('invalid permissions attribute %s.%s_access' %
(instance_name, interface_name)))
return perm
def get_canonical_label(l):
group = l
seen = [l]
while group in group_labels:
group = group_labels[group]
if group in seen:
raise TemplateError('cycle in group labelling: %s' %
', '.join(seen))
seen.append(group)
return group
def parse_int(offs, name):
idx = (i * interrupt_cells) + offs
val = interrupts[idx]
if not isinstance(val, numbers.Integral):
raise TemplateError(
'Error parsing interrupt {}/{} (cells={}, idx={}): '
'{} "{}" is not a number'.format(i + 1, num_interrupts,
interrupt_cells, idx,
name, val))
return val
def render(self, me, assembly, template, obj_space, cap_space, shmem, kept_symbols, fill_frames,
**kwargs):
context = new_context(me, assembly, obj_space, cap_space,
shmem, kept_symbols, fill_frames, self.templates, **kwargs)
t = self.env.get_template(template)
try:
return t.render(context)
except TemplateError:
raise
except Exception as e:
# Catch and re-cast any other exceptions to allow the runner to
# handle them as usual and prevent us barfing stack traces when
# exceptions aren't our fault.
six.reraise(TemplateError, TemplateError('unhandled exception in '
'template %s: %s' % (template, e)), sys.exc_info()[2])
def parse_dtb_node_interrupts(node, max_num_interrupts, arch):
# Interrupts can be described in these formats:
# 1 value: < id ... >
# 2 values: < id flags ... >
# 3 values: < type id flags ...>
# The proper way to figure out how many value per interrupt are in used is
# checking the '#interrupt-cells#' property of the interrupt controller.
# Unfortunately, we don't have the full device tree available here and we
# lack a nice parser that can do this. So we make some best guesses.
is_extended_interrupts = False
interrupts = node.get('interrupts')
if (interrupts is None):
# For extended interrupts, the first element is a interrupt controller
# reference, the following elements are in one of the formats descibed
# above.
interrupts = node.get('interrupts_extended')
if (interrupts is None):
# No interrupts found
return []
is_extended_interrupts = True
irq_set = []
# Keep the behavior on ARM as it was before, so we don't break anything by
# accident. Basically we assume interrupts always have the 3-value-format.
if is_arch_arm(arch):
if interrupts is not None:
if is_extended_interrupts:
# This looks broken, the algorithm below just skips the first
# field, but still assumes 3 values per interrupt. It will work
# if there is just one interrupt, which is usually the case.
num_interrupts = len(interrupts) // 4
else:
num_interrupts = len(interrupts) // 3
if max_num_interrupts != -1 and num_interrupts > max_num_interrupts:
raise TemplateError(
'Device has more than %d interrupts, this is more than we can support.'
) % (max_num_interrupts)
for i in range(0, num_interrupts):
if is_extended_interrupts:
# Same as below, but ignores the first field in the list
_trigger = interrupts[i * 3 + 3]
_irq = interrupts[i * 3 + 2]
_irq_spi = interrupts[i * 3 + 1]
else:
_trigger = interrupts[i * 3 + 2]
_irq = interrupts[i * 3 + 1]
_irq_spi = interrupts[i * 3 + 0]
if (isinstance(_irq_spi, numbers.Integral)
and (_irq_spi == 0)):
_irq = _irq + 32
_trigger = 1 if _trigger < 4 else 0
irq_set.append({'irq': _irq, 'trigger': _trigger})
return irq_set
# For non-ARM architectures (currently that means RISC-V) try using a more
# generic parsing approach. Actually, the ARM parsing above could also use
# this, if we give it some more testing that there are no corner cases for
# existing platforms.
# The guessing strategy is, that if there are less than 3 values in the
# interrupt property, we assume that '#interrupt-cells' is 1, otherwise 3.
# That works, because most peripherals have just 1 interrupt, some can have
# 2 (e.g. separate for Rx/Tx). Obviously, guessing fails badly for there are
# more than 2 interrupts in the 1-value-format, but that would have failed
# before adding this hack also.
if is_extended_interrupts:
# Drop the first element with the interrupt controller reference.
if (len(interrupts) > 1):
interrupts = interrupts[1:]
else:
# Seems there are no interrupts.
return []
interrupt_cells = 1 if (len(interrupts) < 3) else 3
# Do a sanity check that the number of elements make sense.
if (0 != ((len(interrupts) % interrupt_cells))):
raise TemplateError(
'Found {} values, but expecting {} per interrupt'.format(
len(interrupts), interrupt_cells))
num_interrupts = len(interrupts) // interrupt_cells
if (max_num_interrupts != -1) and (num_interrupts > max_num_interrupts):
raise TemplateError(
'Peripheral has {} interrupts, max. {} are supported'.format(
num_interrupts, max_num_interrupts))
irq_set = []
for i in range(0, num_interrupts):
def parse_int(offs, name):
idx = (i * interrupt_cells) + offs
val = interrupts[idx]
if not isinstance(val, numbers.Integral):
raise TemplateError(
'Error parsing interrupt {}/{} (cells={}, idx={}): '
'{} "{}" is not a number'.format(i + 1, num_interrupts,
interrupt_cells, idx,
name, val))
return val
offs_irq = 1 if (3 == interrupt_cells) \
else 0 if (1 == interrupt_cells) \
else None
assert (offs_irq is not None)
irq = parse_int(offs_irq, 'id')
offs_flags = 2 if (3 == interrupt_cells) else None
irq_flags = None if offs_flags is None \
else parse_int(offs_flags, 'trigger')
offs_spi = 0 if (3 == interrupt_cells) else None
irq_type = None if offs_spi is None \
else parse_int(offs_spi, 'type')
# Process the interrupt details.
#
# The 'flags' are defined as:
# bit 0: low-to-high edge triggered
# bit 1: high-to-low edge triggered
# bit 2: active high level-sensitive
# bit 3: active low level-sensitive
# bits 8 - 15: for PPI interrupts this holds the PPI interrupt
# core mask, each bit corresponds to each of the 8
# possible core attached to the GIC,a '1' indicates
# the interrupt is wired to that core.
# Assume edge triggered interrupt if no flags are present.
is_edge_triggered = ((irq_flags is None) or (0 != (irq_flags & 0x3)))
# The 'type' is only relevant on ARM, for all other architectures we
# ignore this value.
# 0: shared peripheral interrupt (SPI) where the actual interrupt
# value is 'irq + 32'
# 1: private peripheral interrupt (PPI)
is_arm_spi = ((irq_type is not None) and is_arch_arm(arch)
and (0 == irq_type))
# Add an interrupt descriptor to the list.
irq_set.append({
'irq': (irq + 32) if is_arm_spi else irq,
'trigger': 1 if is_edge_triggered else 0
})
return irq_set
