def on_eventbox_mdns_adv_button_press_event(self, *args):
msg = (
"Flag toggling mDNS advertizement of the libvirt service.\n\n"
"Alternatively can disable for all services on a host by "
"stopping the Avahi daemon"
)
dialog.show_info_message("mdns_adv", msg)
def on_eventbox_listen_tcp_button_press_event(self, *args):
msg = "Listen for unencrypted TCP connections on the public TCP/IP port. " \
"NB, must pass the --listen flag to the libvirtd process for this to " \
"have any effect.\n\n" \
"Using the TCP socket requires SASL authentication by default. Only " \
"SASL mechanisms which support data encryption are allowed. This is " \
"DIGEST_MD5 and GSSAPI (Kerberos5)"
dialog.show_info_message("listen_tcp", msg)
def on_eventbox_max_client_requests_button_press_event(self, *args):
msg = (
"Limit on concurrent requests from a single client "
"connection. To avoid one client monopolizing the server "
"this should be a small fraction of the global max_requests "
"and max_workers parameter"
)
dialog.show_info_message("max_client_requests", msg)
def on_eventbox_unix_rw_perms_button_press_event(self, *args):
msg = "Set the UNIX socket permissions for the R/W socket.\n\nThis is used " \
"for full management of VMs\n\n" \
"Default allows only root. If PolicyKit is enabled on the socket, " \
"the default will change to allow everyone (eg, 0777)\n\n" \
"If not using PolicyKit and setting group ownership for access " \
"control then you may want to relax this."
dialog.show_info_message("unix_rw_perms", msg)
def on_eventbox_max_requests_button_press_event(self, *args):
msg = "Total global limit on concurrent RPC calls. Should be " \
"at least as large as max_workers. Beyond this, RPC requests "\
"will be read into memory and queued. This directly impact " \
"memory usage, currently each request requires 256 KB of " \
"memory.\n\nSo by default upto 5 MB of memory is used\n\n" \
"XXX this isn't actually enforced yet, only the per-client"
dialog.show_info_message("max_requests", msg)
def on_eventbox_mdns_name_button_press_event(self, *args):
msg = (
"Override the default mDNS advertizement name.\nThis must be "
"unique on the immediate broadcast network.\n\n"
'The default is "Virtualization Host HOSTNAME", where HOSTNAME '
"is subsituted for the short hostname of the machine (without domain)"
)
dialog.show_info_message("mdns_name", msg)
def on_eventbox_tls_no_verify_certificate_button_press_event(self, *args):
msg = "Flag to disable verification of client certificates\n" \
"Client certificate verification is the primary authentication mechanism.\n\n" \
"Any client which does not present a certificate signed by the CA " \
"will be rejected.\n\n" \
"Default is to always verify.\n" \
"verification - make sure an IP whitelist is set"
dialog.show_info_message("tls_no_verify_certificate", msg)
def on_eventbox_unix_sock_group_button_press_event(self, *args):
msg = (
"Set the UNIX domain socket group ownership. This can be used to "
"allow a 'trusted' set of users access to management capabilities "
"without becoming root.\n\n"
"This is restricted to 'root' by default"
)
dialog.show_info_message("unix_sock_group", msg)
def on_eventbox_auth_unix_rw_button_press_event(self, *args):
msg = "Set an authentication scheme for UNIX read-write sockets " \
"By default socket permissions only allow root. If PolicyKit " \
"support was compiled into libvirt, the default will be to " \
"use 'polkit' auth.\n\n" \
"If the unix_sock_rw_perms are changed you may wish to enable " \
"an authentication mechanism here"
dialog.show_info_message("auth_unix_rw", msg)
def on_eventbox_listen_tls_button_press_event(self, *args):
msg = (
"TLS connections on the public TCP/IP port.\n"
"NB, must pass the --listen flag to the libvirtd process for this to "
"have any effect.\n\n"
"It is necessary to setup a CA and issue server certificates before "
"using this capability."
)
dialog.show_info_message("listen_tls", msg)
def on_eventbox_tls_allowed_dn_list_button_press_event(self, *args):
msg = "A whitelist of allowed x509 Distinguished Names" \
"This list may contain wildcards such as\n\n" \
"\"C=GB,ST=London,L=London,O=Red Hat,CN=*\"\n\n" \
"See the POSIX fnmatch function for the format of the wildcards.\n" \
"NB If this is an empty list, no client can connect, so comment out " \
"entirely rather than using empty list to disable these checks\n\n" \
"By default, no DN's are checked"
dialog.show_info_message("tls_allowed_dn_list", msg)
def on_eventbox_unix_sock_ro_perms_button_press_event(self, *args):
msg = (
"Set the UNIX socket permissions for the R/O socket.\n\nThis is used "
"for monitoring VM status only.\n\n"
"Default allows any user. If setting group ownership may want to "
"restrict this."
)
dialog.show_info_message("unix_sock_ro_perms", msg)
def on_eventbox_audit_logging_button_press_event(sef, *args):
msg = "This setting allows usage of the auditing subsystem to be altered:\n\n" \
"audit_level == 0 -> disable all auditing\n" \
"audit_level == 1 -> enable auditing, only if enabled on host (default)\n" \
"audit_level == 2 -> enable auditing, and exit if disabled on host\n" \
"audit_level = 2\n\n" \
"If set to 1, then audit messages will also be sent " \
"via libvirt logging infrastructure. Defaults to 0"
dialog.show_info_message("audit_logging", msg)
def on_eventbox_auth_tls_button_press_event(self, *args):
msg = (
"Change the authentication scheme for TLS sockets.\n\n"
"TLS sockets already have encryption provided by the TLS "
"layer, and limited authentication is done by certificates\n"
"It is possible to make use of any SASL authentication "
"mechanism as well, by using 'sasl' for this option"
)
dialog.show_info_message("auth_tls", msg)
def on_eventbox_auth_tcp_button_press_event(self, *args):
msg = (
"Change the authentication scheme for TCP sockets.\n\n"
"If you don't enable SASL, then all TCP traffic is cleartext.\n"
"Don't do this outside of a dev/test scenario. For real world "
"use, always enable SASL and use the GSSAPI or DIGEST-MD5 "
"mechanism in /etc/sasl2/libvirt.conf"
)
dialog.show_info_message("auth_tcp", msg)
def on_eventbox_min_workers_button_press_event(self, *args):
msg = (
"The minimum limit sets the number of workers to start up "
"initially. If the number of active clients exceeds this, "
"then more threads are spawned, upto max_workers limit.\n\n"
"Typically you'd want max_workers to equal maximum number "
"of clients allowed"
)
dialog.show_info_message("min_workers", msg)
def on_eventbox_unix_rw_perms_button_press_event(self, *args):
msg = (
"Set the UNIX socket permissions for the R/W socket.\n\nThis is used "
"for full management of VMs\n\n"
"Default allows only root. If PolicyKit is enabled on the socket, "
"the default will change to allow everyone (eg, 0777)\n\n"
"If not using PolicyKit and setting group ownership for access "
"control then you may want to relax this."
)
dialog.show_info_message("unix_rw_perms", msg)
def on_eventbox_auth_unix_rw_button_press_event(self, *args):
msg = (
"Set an authentication scheme for UNIX read-write sockets "
"By default socket permissions only allow root. If PolicyKit "
"support was compiled into libvirt, the default will be to "
"use 'polkit' auth.\n\n"
"If the unix_sock_rw_perms are changed you may wish to enable "
"an authentication mechanism here"
)
dialog.show_info_message("auth_unix_rw", msg)
def on_eventbox_max_requests_button_press_event(self, *args):
msg = (
"Total global limit on concurrent RPC calls. Should be "
"at least as large as max_workers. Beyond this, RPC requests "
"will be read into memory and queued. This directly impact "
"memory usage, currently each request requires 256 KB of "
"memory.\n\nSo by default upto 5 MB of memory is used\n\n"
"XXX this isn't actually enforced yet, only the per-client"
)
dialog.show_info_message("max_requests", msg)
def on_eventbox_listen_tcp_button_press_event(self, *args):
msg = (
"Listen for unencrypted TCP connections on the public TCP/IP port. "
"NB, must pass the --listen flag to the libvirtd process for this to "
"have any effect.\n\n"
"Using the TCP socket requires SASL authentication by default. Only "
"SASL mechanisms which support data encryption are allowed. This is "
"DIGEST_MD5 and GSSAPI (Kerberos5)"
)
dialog.show_info_message("listen_tcp", msg)
def on_eventbox_host_uuids_button_press_event(self, *args):
msg = "Provide the UUID of the host here in case the command " \
"'dmidecode -s system-uuid' does not provide a valid uuid.\n\nIn case " \
"'dmidecode' does not provide a valid UUID and none is provided here, a " \
"temporary UUID will be generated.\n\n" \
"Keep the format of the example UUID below. UUID must not have all digits " \
"be the same.\n\n" \
"NB This default all-zeros UUID will not work. Replace" \
"it with the output of the \'uuidgen\'"
dialog.show_info_message("host_uuids", msg)
def on_eventbox_tls_no_verify_certificate_button_press_event(self, *args):
msg = (
"Flag to disable verification of client certificates\n"
"Client certificate verification is the primary authentication mechanism.\n\n"
"Any client which does not present a certificate signed by the CA "
"will be rejected.\n\n"
"Default is to always verify.\n"
"verification - make sure an IP whitelist is set"
)
dialog.show_info_message("tls_no_verify_certificate", msg)
def on_eventbox_tls_allowed_dn_list_button_press_event(self, *args):
msg = (
"A whitelist of allowed x509 Distinguished Names"
"This list may contain wildcards such as\n\n"
'"C=GB,ST=London,L=London,O=Red Hat,CN=*"\n\n'
"See the POSIX fnmatch function for the format of the wildcards.\n"
"NB If this is an empty list, no client can connect, so comment out "
"entirely rather than using empty list to disable these checks\n\n"
"By default, no DN's are checked"
)
dialog.show_info_message("tls_allowed_dn_list", msg)
def on_eventbox_audit_logging_button_press_event(sef, *args):
msg = (
"This setting allows usage of the auditing subsystem to be altered:\n\n"
"audit_level == 0 -> disable all auditing\n"
"audit_level == 1 -> enable auditing, only if enabled on host (default)\n"
"audit_level == 2 -> enable auditing, and exit if disabled on host\n"
"audit_level = 2\n\n"
"If set to 1, then audit messages will also be sent "
"via libvirt logging infrastructure. Defaults to 0"
)
dialog.show_info_message("audit_logging", msg)
def on_eventbox_host_uuids_button_press_event(self, *args):
msg = (
"Provide the UUID of the host here in case the command "
"'dmidecode -s system-uuid' does not provide a valid uuid.\n\nIn case "
"'dmidecode' does not provide a valid UUID and none is provided here, a "
"temporary UUID will be generated.\n\n"
"Keep the format of the example UUID below. UUID must not have all digits "
"be the same.\n\n"
"NB This default all-zeros UUID will not work. Replace"
"it with the output of the 'uuidgen'"
)
dialog.show_info_message("host_uuids", msg)
def on_eventbox_log_filters_button_press_event(self, *args):
msg = "A filter allows to select a different logging level for a given category " \
"of logs.\n\n" \
"The format for a filter is:\n\n" \
"x:name\n" \
"where name is a match string e.g. remote or qemu\n" \
"the x prefix is the minimal level where matching messages should be logged\n\n" \
"1: DEBUG\n" \
"2: INFO\n" \
"3: WARNING\n" \
"4: ERROR\n\n" \
"Multiple filter can be defined in a single @filters, they just need to be " \
"separated by spaces.\n\n" \
"e.g:\n" \
"log_filters=\"3:remote 4:event\"\n" \
"to only get warning or errors from the remote layer and only errors from " \
"the event layer."
dialog.show_info_message("log_filters", msg)
def on_eventbox_log_outputs_button_press_event(self, *args):
msg = "An output is one of the places to save logging informations\n\n" \
"The format for an output can be:\n" \
"x:stderr\n" \
"output goes to stderr\n" \
"x:syslog:name\n" \
"use syslog for the output and use the given name as the ident\n" \
"x:file:file_path\n" \
"output to a file, with the given filepath\n" \
"In all case the x prefix is the minimal level, acting as a filter\n\n" \
"1: DEBUG\n" \
"2: INFO\n" \
"3: WARNING\n" \
"4: ERROR\n\n" \
"Multiple output can be defined, they just need to be separated by spaces.\n\n" \
"e.g.:\n" \
"log_outputs=\"3:syslog:libvirtd\"\n" \
"to log all warnings and errors to syslog under the libvirtd ident"
dialog.show_info_message("log_outputs", msg)
def on_eventbox_auth_unix_ro_button_press_event(self, *args):
msg = "Set an authentication scheme for UNIX read-only sockets " \
"By default socket permissions allow anyone to connect\n\n" \
"To restrict monitoring of domains you may wish to enable " \
"an authentication mechanism\n\n" \
"- none: do not perform auth checks. If you can connect to the " \
"socket you are allowed. This is suitable if there are " \
"restrictions on connecting to the socket (eg, UNIX " \
"socket permissions), or if there is a lower layer in " \
"the network providing auth (eg, TLS/x509 certificates)\n\n" \
"- sasl: use SASL infrastructure. The actual auth scheme is then" \
"controlled from /etc/sasl2/libvirt.conf. For the TCP " \
"socket only GSSAPI DIGEST-MD5 mechanisms will be used. " \
"For non-TCP or TLS sockets, any scheme is allowed.\n\n" \
"- polkit: use PolicyKit to authenticate. This is only suitable" \
"for use on the UNIX sockets. The default policy will" \
"require a user to supply their own password to gain" \
"full read/write access (aka sudo like), while anyone" \
"is allowed read/only access."
dialog.show_info_message("auth_unix_ro", msg)
def on_eventbox_log_filters_button_press_event(self, *args):
msg = (
"A filter allows to select a different logging level for a given category "
"of logs.\n\n"
"The format for a filter is:\n\n"
"x:name\n"
"where name is a match string e.g. remote or qemu\n"
"the x prefix is the minimal level where matching messages should be logged\n\n"
"1: DEBUG\n"
"2: INFO\n"
"3: WARNING\n"
"4: ERROR\n\n"
"Multiple filter can be defined in a single @filters, they just need to be "
"separated by spaces.\n\n"
"e.g:\n"
'log_filters="3:remote 4:event"\n'
"to only get warning or errors from the remote layer and only errors from "
"the event layer."
)
dialog.show_info_message("log_filters", msg)
def on_eventbox_log_outputs_button_press_event(self, *args):
msg = (
"An output is one of the places to save logging informations\n\n"
"The format for an output can be:\n"
"x:stderr\n"
"output goes to stderr\n"
"x:syslog:name\n"
"use syslog for the output and use the given name as the ident\n"
"x:file:file_path\n"
"output to a file, with the given filepath\n"
"In all case the x prefix is the minimal level, acting as a filter\n\n"
"1: DEBUG\n"
"2: INFO\n"
"3: WARNING\n"
"4: ERROR\n\n"
"Multiple output can be defined, they just need to be separated by spaces.\n\n"
"e.g.:\n"
'log_outputs="3:syslog:libvirtd"\n'
"to log all warnings and errors to syslog under the libvirtd ident"
)
dialog.show_info_message("log_outputs", msg)
def on_button_select_service_restart_clicked(self, widget, data=None):
if self.serviceLibvirt != "no":
if os.path.exists("/etc/init.d/libvirtd") != True:
dialog.show_error_message("Cannot locate /etc/init.d/libvirtd!\n Please verify if you have libvirt installed!")
return
ret = subprocess.call(["/etc/init.d/libvirtd", "restart"])
self.serviceSelected = "yes"
if ret != 0:
dialog.show_error_message("Cannot restart libvirtd!\n Please verify if your user has the rights to do it!")
else:
dialog.show_info_message("libvirtd", "service libvirtd restarted!")
if self.serviceVdsm != "no":
if os.path.exists("/etc/init.d/vdsmd") != True:
dialog.show_error_message("Cannot locate /etc/init.d/vdsmd!\n Please verify if you have vdsm installed!")
return
ret = subprocess.call(["/etc/init.d/vdsmd", "restart"])
self.serviceSelected = "yes"
if ret != 0:
dialog.show_error_message("Cannot restart vdsmd!\n Please verify if your user has the rights to do it!")
else:
dialog.show_info_message("vdsmd", "service vdsmd restarted!")
if self.serviceSelected == "no":
dialog.show_info_message("Info", "No service select, cancelled restart!")
# Setting back the original state
self.serviceVdsm = "no"
self.serviceLibvirt = "no"
self.serviceSelected = "no"
def on_eventbox_auth_unix_ro_button_press_event(self, *args):
msg = (
"Set an authentication scheme for UNIX read-only sockets "
"By default socket permissions allow anyone to connect\n\n"
"To restrict monitoring of domains you may wish to enable "
"an authentication mechanism\n\n"
"- none: do not perform auth checks. If you can connect to the "
"socket you are allowed. This is suitable if there are "
"restrictions on connecting to the socket (eg, UNIX "
"socket permissions), or if there is a lower layer in "
"the network providing auth (eg, TLS/x509 certificates)\n\n"
"- sasl: use SASL infrastructure. The actual auth scheme is then"
"controlled from /etc/sasl2/libvirt.conf. For the TCP "
"socket only GSSAPI DIGEST-MD5 mechanisms will be used. "
"For non-TCP or TLS sockets, any scheme is allowed.\n\n"
"- polkit: use PolicyKit to authenticate. This is only suitable"
"for use on the UNIX sockets. The default policy will"
"require a user to supply their own password to gain"
"full read/write access (aka sudo like), while anyone"
"is allowed read/only access."
)
dialog.show_info_message("auth_unix_ro", msg)
def on_button_select_service_restart_clicked(self, widget, data=None):
if self.serviceLibvirt != "no":
if os.path.exists("/etc/init.d/libvirtd") != True:
dialog.show_error_message(
"Cannot locate /etc/init.d/libvirtd!\n Please verify if you have libvirt installed!"
)
return
ret = subprocess.call(["/etc/init.d/libvirtd", "restart"])
self.serviceSelected = "yes"
if ret != 0:
dialog.show_error_message(
"Cannot restart libvirtd!\n Please verify if your user has the rights to do it!"
)
else:
dialog.show_info_message("libvirtd",
"service libvirtd restarted!")
if self.serviceVdsm != "no":
if os.path.exists("/etc/init.d/vdsmd") != True:
dialog.show_error_message(
"Cannot locate /etc/init.d/vdsmd!\n Please verify if you have vdsm installed!"
)
return
ret = subprocess.call(["/etc/init.d/vdsmd", "restart"])
self.serviceSelected = "yes"
if ret != 0:
dialog.show_error_message(
"Cannot restart vdsmd!\n Please verify if your user has the rights to do it!"
)
else:
dialog.show_info_message("vdsmd", "service vdsmd restarted!")
if self.serviceSelected == "no":
dialog.show_info_message("Info",
"No service select, cancelled restart!")
# Setting back the original state
self.serviceVdsm = "no"
self.serviceLibvirt = "no"
self.serviceSelected = "no"
def on_eventbox_log_level_button_press_event(self, *args):
msg = "Logging level: 4 errors, 3 warnings, 2 informations, 1 debug " \
"basically 1 will log everything possible"
dialog.show_info_message("log_level", msg)
def on_eventbox_log_level_button_press_event(self, *args):
msg = "Logging level: 4 errors, 3 warnings, 2 informations, 1 debug " "basically 1 will log everything possible"
dialog.show_info_message("log_level", msg)
def on_eventbox_crl_file_button_press_event(self, *args):
msg = "Specify a certificate revocation list."
dialog.show_info_message("crl_file", msg)
def on_eventbox_key_file_button_press_event(self, *args):
msg = "Override the default server key file path."
dialog.show_info_message("key_file", msg)
def on_eventbox_crl_file_button_press_event(self, *args):
msg = "Specify a certificate revocation list."
dialog.show_info_message("crl_file", msg)
def on_eventbox_listen_addr_button_press_event(self, *args):
msg = (
"Override the default configuration which binds to all network "
"interfaces.\n\nThis can be a numeric IPv4/6 address, or hostname."
)
dialog.show_info_message("listen_addr", msg)
def on_eventbox_max_client_requests_button_press_event(self, *args):
msg = "Limit on concurrent requests from a single client " \
"connection. To avoid one client monopolizing the server " \
"this should be a small fraction of the global max_requests " \
"and max_workers parameter"
dialog.show_info_message("max_client_requests", msg)
def on_eventbox_unix_sock_group_button_press_event(self, *args):
msg = "Set the UNIX domain socket group ownership. This can be used to " \
"allow a \'trusted\' set of users access to management capabilities " \
"without becoming root.\n\n" \
"This is restricted to 'root' by default"
dialog.show_info_message("unix_sock_group", msg)
def on_eventbox_max_workers_button_press_event(self, *args):
msg = "The maximum limit sets the number of workers"
dialog.show_info_message("max_workers", msg)
def on_eventbox_unix_sock_dir_button_press_event(self, *args):
msg = "Set the name of the directory in which sockets will be found/created."
dialog.show_info_message("unix_sock_dir", msg)
def on_eventbox_max_clients_button_press_event(self, *args):
msg = "The maximum number of concurrent client connections to allow " "over all sockets combined.\n"
dialog.show_info_message("max_clients", msg)
def on_eventbox_key_file_button_press_event(self, *args):
msg = "Override the default server key file path."
dialog.show_info_message("key_file", msg)
def on_eventbox_image_save_image_format_button_press_event(self, *args):
msg = "image format"
dialog.show_info_message("save_image_format", msg)
def on_eventbox_tls_port_button_press_event(self, *args):
msg = "Override the port for accepting secure TLS connections.\n" "This can be a port number, or service name"
dialog.show_info_message("tls_port", msg)
def on_eventbox_mdns_name_button_press_event(self, *args):
msg = "Override the default mDNS advertizement name.\nThis must be " \
"unique on the immediate broadcast network.\n\n" \
"The default is \"Virtualization Host HOSTNAME\", where HOSTNAME " \
"is subsituted for the short hostname of the machine (without domain)"
dialog.show_info_message("mdns_name", msg)
def on_eventbox_max_workers_button_press_event(self, *args):
msg = "The maximum limit sets the number of workers"
dialog.show_info_message("max_workers", msg)
def on_eventbox_listen_addr_button_press_event(self, *args):
msg = "Override the default configuration which binds to all network " \
"interfaces.\n\nThis can be a numeric IPv4/6 address, or hostname."
dialog.show_info_message("listen_addr", msg)
def on_eventbox_max_clients_button_press_event(self, *args):
msg = "The maximum number of concurrent client connections to allow " \
"over all sockets combined.\n"
dialog.show_info_message("max_clients", msg)
def on_eventbox_mdns_adv_button_press_event(self, *args):
msg = "Flag toggling mDNS advertizement of the libvirt service.\n\n" \
"Alternatively can disable for all services on a host by " \
"stopping the Avahi daemon"
dialog.show_info_message("mdns_adv", msg)
def on_eventbox_ca_file_button_press_event(self, *args):
msg = "Override the default CA certificate path."
dialog.show_info_message("ca_file", msg)
def on_eventbox_tls_port_button_press_event(self, *args):
msg = "Override the port for accepting secure TLS connections.\n" \
"This can be a port number, or service name"
dialog.show_info_message("tls_port", msg)
def on_eventbox_image_save_image_format_button_press_event(self, *args):
msg = "image format"
dialog.show_info_message("save_image_format", msg)
def on_eventbox_ca_file_button_press_event(self, *args):
msg = "Override the default CA certificate path."
dialog.show_info_message("ca_file", msg)
