Exemplo n.º 1
0
 def __str__(self):
     return "ID:             0x%s\n" \
            "State:          %s\n" \
            "Protocol:       %s\n" \
            "Local port:     0x%s\n" \
            "Remote port:    0x%s\n" \
            "Remote address: %s"\
            % (utils.hex_to_string(utils.int_to_bytes(self.__socket_id, num_bytes=1), False),
               self.__state.description, self.__protocol.description,
               utils.hex_to_string(utils.int_to_bytes(self.__local_port, num_bytes=2), False),
               utils.hex_to_string(utils.int_to_bytes(self.__remote_port, num_bytes=2), False),
               self.__remote_addr)
Exemplo n.º 2
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = utils.int_to_bytes(self.__request_id, num_bytes=1)
        ret += utils.int_to_bytes(0x00, num_bytes=1)
        if self.__response_data is not None:
            ret += self.__response_data

        return ret
Exemplo n.º 3
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = bytearray(self.__src_addr.packed)
        ret += utils.int_to_bytes(self.__rssi, num_bytes=1)
        ret += utils.int_to_bytes(self.__rx_opts, num_bytes=1)
        if self.__data is not None:
            ret += self.__data
        return ret
Exemplo n.º 4
0
def instantiate_zigbee_network():
    try:
        print("Opening xbee port")
        xbee.open()
        print("Setting Power Level")
        xbee.set_parameter('PL', utils.int_to_bytes(power_level, num_bytes=1))
        print("Setting API Mode")
        xbee.set_parameter('AP', utils.int_to_bytes(api_mode, num_bytes=1))
        xbee.set_io_configuration(IOLine.DIO4_AD4, IOMode.DISABLED)
        print("Getting self id")
        global node_id
        node_id = xbee.get_node_id()
        global address
        address = str(xbee.get_64bit_addr())
        print("This Node ID: ", node_id)
        print("Is Remote: ", xbee.is_remote())
        print("Power Level: ", xbee.get_power_level())

        print("Entering discovery mode...\n")

        xnet = xbee.get_network()
        xnet.set_discovery_timeout(15)
        xnet.clear()

        xnet.add_device_discovered_callback(xlib.discoverCallback)
        xnet.add_discovery_process_finished_callback(xlib.discoverCompleteCallback)
        global start_net
        start_net = time.time()
        xnet.start_discovery_process()

        while xnet.is_discovery_running():
            time.sleep(0.5)
        global nodes
        nodes = xnet.get_devices()
        data = 'Zigbee node %s sending data' % (xbee.get_node_id())

        return 1

    except ConnectionException:
        print('Error Connection')
        xbee.close()
        return 0
    except ATCommandException:
        print('Response of the command is not valid : ATCommandException')
        xbee.close()
        return 0
    except InvalidOperatingModeException:
        print('Not in API Mode')
        xbee.close()
        return 0
Exemplo n.º 5
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_API_packet_spec_data`
        """
        ret = bytearray(self.__src_addr.packed)
        ret += utils.int_to_bytes(self.__dest_port, num_bytes=2)
        ret += utils.int_to_bytes(self.__src_port, num_bytes=2)
        ret += utils.int_to_bytes(self.__ip_prot.code, num_bytes=1)
        ret += utils.int_to_bytes(self.__status, num_bytes=1)
        if self.__data is not None:
            ret += self.__data
        return ret
Exemplo n.º 6
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_API_packet_spec_data`
        """
        ret = bytearray(self.__dest_address.packed)
        ret += utils.int_to_bytes(self.__dest_port, num_bytes=2)
        ret += utils.int_to_bytes(self.__source_port, num_bytes=2)
        ret += utils.int_to_bytes(self.__ip_protocol.code)
        ret += utils.int_to_bytes(self.__transmit_options)
        if self.__data is not None:
            ret += self.__data
        return ret
Exemplo n.º 7
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        return utils.int_to_bytes(self.__transmit_status.code, 1)
Exemplo n.º 8
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        return utils.int_to_bytes(self.__frame_error.code, num_bytes=1)
Exemplo n.º 9
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = utils.int_to_bytes(self.__request_id, num_bytes=1)
        ret += utils.int_to_bytes(self.__transport, num_bytes=1)
        ret += utils.int_to_bytes(self.__flags, num_bytes=1)
        if self.__target is not None:
            ret += utils.int_to_bytes(len(self.__target), num_bytes=1)
            ret += bytearray(self.__target, "utf8")
        else:
            ret += utils.int_to_bytes(0x00, num_bytes=1)
        if self.__request_data is not None:
            ret += self.__request_data

        return ret
Exemplo n.º 10
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_API_packet_spec_data`
        """
        ret = utils.int_to_bytes(self.__transmit_options, num_bytes=1)
        ret += self.__phone_number
        if self.__data is not None:
            ret += self.__data.encode("utf8")
        return ret
Exemplo n.º 11
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = bytearray(self.__src_addr.packed)
        ret += bytearray(self.__cmd, "utf8")
        ret += utils.int_to_bytes(self.__resp_status.code, num_bytes=1)
        if self.__comm_val is not None:
            ret += self.__comm_val
        return ret
Exemplo n.º 12
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = bytearray(self.__dest_addr.packed)
        ret += utils.int_to_bytes(self.__tx_opts, num_bytes=1)
        ret += bytearray(self.__cmd, "utf8")
        if self.__param is not None:
            ret += self.__param
        return ret
Exemplo n.º 13
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = bytearray(self.__dest_address.packed)
        ret += utils.int_to_bytes(self.__transmit_options, num_bytes=1)
        ret += bytearray(self.__command, "utf8")
        if self.__parameter is not None:
            ret += self.__parameter
        return ret
Exemplo n.º 14
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        ret = bytearray([self.__src_event])
        ret.append(self.length)
        ret += utils.int_to_bytes(self.__timestamp, num_bytes=4)
        ret.append(self.__ack_timeout_count)
        ret.append(self.__tx_block_count)
        ret.append(self._reserved)
        ret += self.__dst_addr.address
        ret += self.__src_addr.address
        ret += self.__responder_addr.address
        ret += self.__successor_addr.address
        if self.__additional_data:
            ret += self.__additional_data

        return ret
Exemplo n.º 15
0
    def _get_api_packet_spec_data(self):
        """
        Override method.

        .. seealso::
           | :meth:`.XBeeAPIPacket._get_api_packet_spec_data`
        """
        if self.__path is not None:
            ret = utils.int_to_bytes(len(self.__path), num_bytes=1)
            ret += bytearray(self.__path, "utf8")
        else:
            ret = utils.int_to_bytes(0x00, num_bytes=1)
        if self.__content_type is not None:
            ret += utils.int_to_bytes(len(self.__content_type), num_bytes=1)
            ret += bytearray(self.__content_type, "utf8")
        else:
            ret += utils.int_to_bytes(0x00, num_bytes=1)
        ret += utils.int_to_bytes(0x00, num_bytes=1)  # Transport is always TCP
        ret += utils.int_to_bytes(self.__options.code, num_bytes=1)
        if self.__file_data is not None:
            ret += self.__file_data

        return ret
Exemplo n.º 16
0
    dest_address = XBee64BitAddress.from_hex_string("000000000000FFFF")
    device.set_dest_address(dest_address)

    device.set_pan_id(bytearray.fromhex(opts.pan_id))

    #cmd = 'AP2,'

    device.set_parameter("AP", bytearray.fromhex("02"))
    if (opts.coordinator):
        device.set_parameter("CE", bytearray.fromhex("01"))
    else:
        device.set_parameter("CE", bytearray.fromhex("00"))
    #cmd += 'CE1,' #API mode 2, and enable coordinator

    device.set_parameter("MY", utils.int_to_bytes(my_address))
    device.set_parameter("NI", bytearray(opts.name, 'utf8'))
    device.set_parameter("BD", utils.int_to_bytes(baud_lookup[57600]))
    device.set_parameter("CH", bytearray.fromhex(opts.channel))
    device.set_parameter("RN", bytearray.fromhex("01"))
    device.set_parameter("RO", bytearray.fromhex("05"))

    device.apply_changes()
    device.write_changes()
    device.reset()
    device.close()

    # cmd += 'MY%d,'%int(args[1]) #set the xbee address
    # cmd += 'BD%d,'%baud_lookup[57600] #set the xbee to interface at 57600 baud
    # cmd += 'ID%d,'%opts.pan_id
    # cmd += 'CH%s,'%opts.channel
 def modem_status_receive_callback(modem_status):
     print("Modem Status event received: %s: %s" % (utils.hex_to_string(utils.int_to_bytes(modem_status.code,
                                                                                           1)),
                                                    modem_status.description))