def op_commands(session, op_list):
""" Run operational commands. """
# Try a single op command
print color('Single op command: show interfaces terse | match lo0', 'yel')
print session.op_cmd('show interfaces terse | match lo0')
# single op command with xml output
print color('Single op command in xml format: show interfaces terse'
' | match lo0', 'yel')
print session.op_cmd('show interfaces terse | match lo0', req_format='xml')
# single op command with xpath filtering
print color('Single op command with xpath filtering on package-'
'information: show version', 'yel')
print session.op_cmd('show version', xpath_expr='//package-information')
# Try a list of op commands, includes the following:
# regular command
# show version
# # command with piping
# show route | match 0.0.0.0
print color('Multiple op commands from file:', 'yel')
# loop over the commands in our file
for cmd in clean_lines(op_list):
print color(cmd, 'yel')
print session.op_cmd(cmd)
def op_commands(session, op_list):
""" Run operational commands. """
# Try a single op command
print color('Single op command: show interfaces terse | match lo0', 'yel')
print session.op_cmd('show interfaces terse | match lo0')
# single op command with xml output
print color(
'Single op command in xml format: show interfaces terse'
' | match lo0', 'yel')
print session.op_cmd('show interfaces terse | match lo0', req_format='xml')
# single op command with xpath filtering
print color(
'Single op command with xpath filtering on package-'
'information: show version', 'yel')
print session.op_cmd('show version', xpath_expr='//package-information')
# Try a list of op commands, includes the following:
# regular command
# show version
# # command with piping
# show route | match 0.0.0.0
print color('Multiple op commands from file:', 'yel')
# loop over the commands in our file
for cmd in clean_lines(op_list):
print color(cmd, 'yel')
print session.op_cmd(cmd)
def conn_timeout_test(host):
""" Connect to a device that doesn't exist, hoping for a timeout. """
try:
Jaide(host, 'asdf', '123', connect_timeout=10)
except socket.timeout:
print color('The connection failed, as expected')
return True
print color('The connection did not fail, check settings for this test.',
'red')
def conn_timeout_test(host):
""" Connect to a device that doesn't exist, hoping for a timeout. """
try:
Jaide(host, 'asdf', '123', connect_timeout=10)
except socket.timeout:
print color('The connection failed, as expected')
return True
print color('The connection did not fail, check settings for this test.',
'red')
def scp_tests(session, remote_dir, local_dir, remote_file, local_file):
""" Try all four directions of SCP operations. """
print color('Copying a single file TO device', 'yel')
print session.scp_push(local_file, remote_dir, True)
session.shell_cmd('rm %s/%s' % (remote_dir, os.path.basename(local_file)))
print color('Copying a single file FROM device', 'yel')
print session.scp_pull(remote_file, local_dir + '/', True)
print color('Copying a directory TO device', 'yel')
print session.scp_push(local_dir, remote_dir, True)
session.shell_cmd('rm -R %s/%s' %
(remote_dir, os.path.basename(local_dir)))
print color('Copying a directory FROM device', 'yel')
print session.scp_pull(remote_dir, local_dir, True)
def scp_tests(session, remote_dir, local_dir, remote_file, local_file):
""" Try all four directions of SCP operations. """
print color('Copying a single file TO device', 'yel')
print session.scp_push(local_file, remote_dir, True)
session.shell_cmd('rm %s/%s' % (remote_dir, os.path.basename(local_file)))
print color('Copying a single file FROM device', 'yel')
print session.scp_pull(remote_file, local_dir + '/', True)
print color('Copying a directory TO device', 'yel')
print session.scp_push(local_dir, remote_dir, True)
session.shell_cmd('rm -R %s/%s' % (remote_dir,
os.path.basename(local_dir)))
print color('Copying a directory FROM device', 'yel')
print session.scp_pull(remote_dir, local_dir, True)
def shell_commands(session, shell_list):
""" Run shell commands. """
# try a single shell command
print color('Single shell command: pwd', 'yel')
print session.shell_cmd('pwd')
# try a shell command file
# file contents:
# pwd
# cd /var/tmp
# pwd
# ls -lap
# touch my-new-file
# ls -lap
print color('multiple shell commands from file:', 'yel')
# loop over the commands in our file.
for cmd in clean_lines(shell_list):
print color(cmd, 'yel')
print session.shell_cmd(cmd)
def shell_commands(session, shell_list):
""" Run shell commands. """
# try a single shell command
print color('Single shell command: pwd', 'yel')
print session.shell_cmd('pwd')
# try a shell command file
# file contents:
# pwd
# cd /var/tmp
# pwd
# ls -lap
# touch my-new-file
# ls -lap
print color('multiple shell commands from file:', 'yel')
# loop over the commands in our file.
for cmd in clean_lines(shell_list):
print color(cmd, 'yel')
print session.shell_cmd(cmd)
def commit_tests(session):
""" Attempt all manner of commit types. """
print color('Starting commit log', 'yel')
print session.op_cmd('show system commit')
print color('Attempting blank commit:', 'yel')
print session.commit()
print color('Attempting blank commit with comment:', 'yel')
print session.commit(comment="blank with comment")
print color('Attempting blank commit with comment and synchronize:', 'yel')
print session.commit(comment="blank with comment and synch",
synchronize=True)
print color('Attempting blank commit confirmed for 20 minutes:', 'yel')
print session.commit(confirmed=1200)
print color('Attempting to confirm the commit confirmed:', 'yel')
print session.commit()
print color('Attempting to commit at:', 'yel')
print session.commit(at_time='23:59')
print color('Ending commit Log:', 'yel')
print session.op_cmd('show system commit')
print session.op_cmd('clear system commit')
def main(host, username, password, second_host, second_password, third_host,
remote_dir, local_dir, remote_file, local_file, set_list, op_list,
shell_list):
""" Test suite for testing the jaide package core.py. """
# open connection
print color('Connecting to %s with %s / %s' % (host, username, password),
'yel')
session = Jaide(host, username, password)
# test op and shell commands
print color('Testing op commands', 'yel')
op_commands(session, op_list)
print color('Testing shell commands', 'yel')
shell_commands(session, shell_list)
# disconnect, change username/password/host, and do the commands again
print color('Disconnecting first session', 'yel')
session.disconnect()
# changing to the root user will test other use case of migration from
# shell to cli on initialization of the connection
print color(
'\nChanging parameters to root:%s@%s' % (second_password, second_host),
'yel')
session.username = '******'
session.password = second_password
session.host = second_host
print color('Testing op commands', 'yel')
op_commands(session, op_list)
print color('Testing shell commands', 'yel')
shell_commands(session, shell_list)
# scp tests here
print color('Testing SCP operations', 'yel')
scp_tests(session, remote_dir, local_dir, remote_file, local_file)
print color(
'\nTesting modifying conn_timeout to 10 seconds connection '
'that will fail:', 'yel')
print color(
'the method \'connect\' should clock total time of 10 '
'seconds:', 'yel')
cProfile.runctx('conn_timeout_test(host)', globals(), {'host': third_host})
print color('Disconnecting session again.', 'yel')
session.disconnect()
# change back to non-root user for speed of tests.
print color('\nChanging parameters to operate:[email protected]', 'yel')
session.username = username
session.password = password
session.host = host
# config diff test
print color('Performing a config diff:', 'yel')
config_diff_test(session, second_host)
# commit check test
print color('Performing a commit check:', 'yel')
commit_check_test(session, set_list)
# show | compare test
print color('Performing a commit compare:', 'yel')
compare_config_test(session, set_list)
# commit option tests
print color('Performing commit tests:', 'yel')
commit_tests(session)
# change session timeout
print color(
'changing timeout to 1 second and doing an RSI, '
'which should timeout', 'yel')
session.session_timeout = 1
try:
print session.op_cmd('request support information')
except socket.timeout:
print color('Timeout exceeded as expected')
# print color('trying a shell command to timeout', 'yel')
# try:
# print session.shell_cmd('scp /var/tmp/gimp-2.8.14.dmg /var/tmp/gimp-copy')
# except socket.timeout:
# print color('Timeout exceeded as expected.')
session.disconnect()
def commit_tests(session):
""" Attempt all manner of commit types. """
print color('Starting commit log', 'yel')
print session.op_cmd('show system commit')
print color('Attempting blank commit:', 'yel')
print session.commit()
print color('Attempting blank commit with comment:', 'yel')
print session.commit(comment="blank with comment")
print color('Attempting blank commit with comment and synchronize:',
'yel')
print session.commit(comment="blank with comment and synch",
synchronize=True)
print color('Attempting blank commit confirmed for 20 minutes:', 'yel')
print session.commit(confirmed=1200)
print color('Attempting to confirm the commit confirmed:', 'yel')
print session.commit()
print color('Attempting to commit at:', 'yel')
print session.commit(at_time='23:59')
print color('Ending commit Log:', 'yel')
print session.op_cmd('show system commit')
print session.op_cmd('clear system commit')
def main(host, username, password, second_host, second_password, third_host,
remote_dir, local_dir, remote_file, local_file, set_list, op_list,
shell_list):
""" Test suite for testing the jaide package core.py. """
# open connection
print color('Connecting to %s with %s / %s' % (host, username,
password), 'yel')
session = Jaide(host, username, password)
# test op and shell commands
print color('Testing op commands', 'yel')
op_commands(session, op_list)
print color('Testing shell commands', 'yel')
shell_commands(session, shell_list)
# disconnect, change username/password/host, and do the commands again
print color('Disconnecting first session', 'yel')
session.disconnect()
# changing to the root user will test other use case of migration from
# shell to cli on initialization of the connection
print color('\nChanging parameters to root:%s@%s' % (second_password,
second_host), 'yel')
session.username = '******'
session.password = second_password
session.host = second_host
print color('Testing op commands', 'yel')
op_commands(session, op_list)
print color('Testing shell commands', 'yel')
shell_commands(session, shell_list)
# scp tests here
print color('Testing SCP operations', 'yel')
scp_tests(session, remote_dir, local_dir, remote_file, local_file)
print color('\nTesting modifying conn_timeout to 10 seconds connection '
'that will fail:', 'yel')
print color('the method \'connect\' should clock total time of 10 '
'seconds:', 'yel')
cProfile.runctx('conn_timeout_test(host)', globals(), {'host': third_host})
print color('Disconnecting session again.', 'yel')
session.disconnect()
# change back to non-root user for speed of tests.
print color('\nChanging parameters to operate:[email protected]', 'yel')
session.username = username
session.password = password
session.host = host
# config diff test
print color('Performing a config diff:', 'yel')
config_diff_test(session, second_host)
# commit check test
print color('Performing a commit check:', 'yel')
commit_check_test(session, set_list)
# show | compare test
print color('Performing a commit compare:', 'yel')
compare_config_test(session, set_list)
# commit option tests
print color('Performing commit tests:', 'yel')
commit_tests(session)
# change session timeout
print color('changing timeout to 1 second and doing an RSI, '
'which should timeout', 'yel')
session.session_timeout = 1
try:
print session.op_cmd('request support information')
except socket.timeout:
print color('Timeout exceeded as expected')
# print color('trying a shell command to timeout', 'yel')
# try:
# print session.shell_cmd('scp /var/tmp/gimp-2.8.14.dmg /var/tmp/gimp-copy')
# except socket.timeout:
# print color('Timeout exceeded as expected.')
session.disconnect()
