def handle_nano_leaf_on_intent(self, message):
silent_kw = message.data.get("SilentKeyword")
MyPanels = Aurora(self.IPstring, self.tokenString)
MyPanels.on = True
MyPanels.brightness = 100
if not silent_kw:
self.speak_dialog("light.on")
def HyperLeaf(my_panels):
PanelIDs = my_panels[1:-1]
lower_panel = my_panels[0]
upper_panel = my_panels[len(my_panels) - 1]
first_panel = PanelIDs[0]
last_panel = PanelIDs[len(PanelIDs) - 1]
print(my_panels)
print(lower_panel)
print(first_panel)
print(upper_panel)
print(last_panel)
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) # UDP
sock.bind((UDP_IP, UDP_PORT))
my_aurora = Aurora(IPstring,
tokenString) # IP address and key for nanoleaf Aurora
my_aurora.on = True #Turn nanoleaf on
my_aurora.brightness = 50 #set brightness
sleep(1)
strm = my_aurora.effect_stream(
) #set nanoleaf to streaming mode, this only works with bharat's fork of nanoleaf
LOG.info(strm.addr)
while True:
data = sock.recvfrom(
21
) # hyperion sends 3 bytes (R,G,B) for each configured light (3*7=21)
now = datetime.datetime.now() # retrieve time for debuging
new = bytearray(data[0]) # retrieve hyperion byte array
RGBList = list(new) # great R-G-B list
# print(RGBList) # for debuging only
PanelCount = 0 # initial condition
for Panel in PanelIDs: # itterate through the configured PanleID's above
firstByteIndex = PanelCount * 3 # Red Index
secondByteIndex = firstByteIndex + 1 # Green Index
thirdByteIndex = secondByteIndex + 1 # Blue Index
intPanelID = PanelIDs[
PanelCount] # This Panel ID ***could this not just be "Panel"
intRedValue = RGBList[firstByteIndex]
intGreenValue = RGBList[secondByteIndex]
intBlueValue = RGBList[thirdByteIndex]
# print(str(intPanelID) + " " + str(intRedValue) + " " + str(intGreenValue) + " " + str(intBlueValue))
if intPanelID == lower_panel or intPanelID == first_panel: # condition to handle two panels on the same vertical axis, or configure hyperion to drive this as well
strm.panel_set(lower_panel, intRedValue, intGreenValue,
intBlueValue)
strm.panel_set(first_panel, intRedValue, intGreenValue,
intBlueValue)
else:
if intPanelID == upper_panel or intPanelID == last_panel: # condition to handle two panels on the same vertical axis, or configure hyperion to drive this as well
strm.panel_set(upper_panel, intRedValue, intGreenValue,
intBlueValue)
strm.panel_set(last_panel, intRedValue, intGreenValue,
intBlueValue)
else:
strm.panel_set(intPanelID, intRedValue, intGreenValue,
intBlueValue) # set the current panel color
PanelCount += 1 # next panel
def show_temperature(self, temp):
my_aurora = Aurora(self.IP, self.AUTH_TOKEN)
red = Color("blue")
colors = list(red.range_to(Color("red"), 50))
color = colors[int(temp) + 10]
hex = color.get_hex_l()[1:]
my_aurora.rgb = hex
my_aurora.brightness = 40
sleep(2)
my_aurora.on = False
def update_effect(effect_name):
aurora = Aurora(support.get_nanoleaf_ip(), support.get_nanoleaf_token())
aurora.on = True
if effect_name == "Random\n":
effect_name = aurora.effect_random()
aurora.effect = effect_name
return "Random - " + effect_name
elif effect_name == "Flash Twice":
aurora.identify()
else:
aurora.effect = effect_name
return effect_name
from nanoleaf import setup
from nanoleaf import Aurora
import time as tm
import sys
import myfunc
# auroraのip addressを見つけてトークンを作成する．
# 日によってip addressは異なる場合がある
#ipAddressList = setup.find_auroras()
#token = setup.generate_auth_token("10.0.1.2")
# auroraと接続する
#my_aurora = Aurora("10.0.1.3", "b2UeRO2H2aImB4uHYbDKtYCHJDIxuE4W")
my_aurora = Aurora("10.0.1.3", "ufeEL3sFsRYJB92XH6gDG6O5oXRIJPhB")
my_aurora.on = True
#for panel in my_aurora.panel_positions:
# print(panel['panelId'])
# panel index
# 218, 113, 23, 101, 77, 87, 86, 209, 53
# 色の指定を行う
# animDataに入れるのは，'(panel数) (panel index) (frame数) (R) (G) (B) (W) (遷移時間)'
# (panel数)だけ最初に一つ指定
# list[0]はpanel index
# index[1]はindex + frame数
index = [['23', '53', '77', '86', '87', '101', '113', '209', '218'],
[
'23 1 ', '53 1 ', '77 1 ', '86 1 ', '87 1 ', '101 1 ', '113 1 ',
'209 1 ', '218 1 '
]]
def handle_nano_leaf_off_intent(self, message):
silent_kw = message.data.get("SilentKeyword")
MyPanels = Aurora(self.IPstring, self.tokenString)
MyPanels.on = False
if not silent_kw:
self.speak_dialog("light.off")
def do_cinema_mode(self, my_id, terminate):
addr = self.get_ifaces()
if len(addr) == 0:
LOG.info("no UDP network connection detected")
elif len(addr) == 1:
iface, my_ip = addr.popitem()
LOG.info("UDP network connection found")
self.UDP_IP = my_ip
LOG.info("Starting Nanoleaf Cinema Mode: " + str(my_id))
all_panels = self.get_panels()
panel_ids = all_panels[1:-1]
lower_panel = all_panels[0]
upper_panel = all_panels[len(all_panels) - 1]
first_panel = panel_ids[0]
last_panel = panel_ids[len(panel_ids) - 1]
try:
LOG.info('Attempting to open the socket connection')
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) # UDP
sock.bind((self.UDP_IP, self.UDP_PORT))
sock.settimeout(5)
socket_open = True
except Exception as e:
LOG.error(e)
LOG.info('Socket Connection Failed')
socket_open = False
LOG.info('Connecting to Aurora at: ' + self.IPstring + " : " +
self.tokenString)
my_aurora = Aurora(
self.IPstring,
self.tokenString) # IP address and key for nanoleaf Aurora
my_aurora.on = True # Turn nanoleaf on
my_aurora.brightness = 50 # set brightness
sleep(1)
LOG.info('Attempting to switch to cinema mode')
try:
strm = my_aurora.effect_stream() # set nanoleaf to streaming mode
LOG.info('Aurora Successfully switched to cinema mode')
LOG.info('waiting for udp data')
while True:
if not socket_open:
break
try:
raw_data = sock.recvfrom(
21
) # hyperion sends 3 bytes (R,G,B) for each configured light (3*7=21)
byte_data = bytearray(
raw_data[0]) # retrieve hyperion byte array
rgb_list = list(byte_data) # great R-G-B list
# LOG.info(rgb_list) # for debuging only
panel_count = 0 # initial condition
for each_panel in panel_ids: # itterate through the configured PanleID's above
# Todo - Determine if I can use Panel instead of PanelID's
# Todo - If we can use Panel then the PanelCount should not be required
# LOG.info('Panel: ' + str(each_panel) + " - Panel ID:" + str(panel_ids[panel_count]))
first_byte_index = panel_count * 3 # Red Index
second_byte_index = first_byte_index + 1 # Green Index
third_byte_index = second_byte_index + 1 # Blue Index
int_panel_id = panel_ids[
panel_count] # This Panel ID ***could this not just be "Panel"
# int_panel_id = each_panel
int_red_value = rgb_list[first_byte_index]
int_green_value = rgb_list[second_byte_index]
int_blue_value = rgb_list[third_byte_index]
if int_panel_id == lower_panel or int_panel_id == first_panel: # condition to handle two panels on the same vertical axis, or configure hyperion to drive this as well
strm.panel_set(lower_panel, int_red_value,
int_green_value, int_blue_value)
strm.panel_set(first_panel, int_red_value,
int_green_value, int_blue_value)
else:
if int_panel_id == upper_panel or int_panel_id == last_panel: # condition to handle two panels on the same vertical axis, or configure hyperion to drive this as well
strm.panel_set(upper_panel, int_red_value,
int_green_value, int_blue_value)
strm.panel_set(last_panel, int_red_value,
int_green_value, int_blue_value)
else:
strm.panel_set(int_panel_id, int_red_value,
int_green_value, int_blue_value
) # set the current panel color
panel_count += 1 # next panel
except Exception as e:
LOG.error(e)
LOG.info('Socket Timeout Error - No Data Received')
break
if terminate():
LOG.info('Stop Signal Received')
break
except Exception as e:
LOG.error(e)
LOG.info('Aurora Failed to launch cinema mode')
my_aurora.on = False # Turn nanoleaf off
try:
sock.close()
LOG.info('Socket Closed')
except Exception as e:
LOG.error(e)
LOG.info('Socket Closure Failed!')
LOG.info("Nanoleaf Cinema Mode Ended: " + str(my_id))
def nanoAction(message):
global settings
print(" < %s in queue" % q.qsize())
part = 1
# for Mixer and YouTube events
if len(json.loads(message)["event"].split("_")) == 3:
part = 2
event = json.loads(message)["event"].split("_")[part].lower()
try:
host = settings["nanoleaf"]
token = settings["nanoleaf_token"]
host2 = settings["nanoleaf2"]
token2 = settings["nanoleaf2_token"]
device = nl12
if event + "_device" in settings:
device = settings[event + "_device"]
if event == "connected":
print(" + devices")
if host != "":
print(" o " + nl1 + " (" + host + ")")
if host2 != "":
print(" o " + nl2 + " (" + host2 + ")")
print(" + waiting for events ...")
return
elif event == "naec":
data = json.loads(
json.loads(message, encoding='utf-8-sig')["data"])
effect_new = data["effect_new"]
duration = int(data["effect_duration"])
effect_default = data["effect_default"]
parameter = data["effect_parameter"]
elif event == "naecupdate":
readSettings()
return
elif settings[event + "_effect"] != '':
effect_new = settings[event + "_effect"]
duration = int(settings[event + "_effectduration"])
effect_default = settings["default_effect"]
if (event == "host"):
data = json.loads(
json.loads(message, encoding='utf-8-sig')["data"])
if (int(data["viewers"]) < int(
settings["host_minviewers"])):
return
elif (event == "cheer"):
data = json.loads(
json.loads(message, encoding='utf-8-sig')["data"])
if (int(data["bits"]) < int(settings["cheer_minbits"])):
return
else:
return
if (event == "host"):
print(" + " + event + " (" + str(data["viewers"]) +
" viewers)")
elif (event == "cheer"):
print(" + " + event + " (" + str(data["bits"]) +
" bits)")
else:
print(" + " + event)
print(" + actions")
if host != "" and '1' in device:
my_aurora = Aurora(host, token)
my_aurora.on = True
my_aurora.effect = effect_new
else:
print("no '1' in " + device)
if host2 != "" and '2' in device:
my_aurora2 = Aurora(host2, token2)
my_aurora2.on = True
my_aurora2.effect = effect_new
if duration > 0:
durationtext = " for " + str(duration) + " seconds"
else:
durationtext = ""
print(" o change effect to '" + effect_new + "'" +
durationtext)
if duration > 0:
time.sleep(duration)
if host != "" and '1' in device:
my_aurora.effect = effect_default
if host2 != "" and '2' in device:
my_aurora2.effect = effect_default
print(" o change effect to '" + effect_default + "'")
except KeyError:
pass
except ValueError:
print("Could not convert data to an integer.")
except:
print("Unexpected error:", sys.exc_info()[0])
raise
#---------------------------------------
# Set Variables
#---------------------------------------
path = os.path.dirname(__file__)
settingsFile = "NAEC.json"
settings = {}
#---------------------------------------
# Get settings
#---------------------------------------
try:
with codecs.open(os.path.join(path, settingsFile),
encoding='utf-8-sig',
mode='r') as file:
settings = json.load(file, encoding='utf-8-sig')
print("read settings file: ", path + "\\" + settingsFile)
except:
print("Unexpected error:", sys.exc_info())
sys.exit("cannot read settings file")
pass
#---------------------------------------
# Nanoleaf Aurora actions
#---------------------------------------
my_aurora = Aurora(settings["nanoleaf"], settings["nanoleaf_token"])
if len(sys.argv) > 1:
my_aurora.on = True
my_aurora.effect = sys.argv[1]
else:
my_aurora.on = False
import PIL.ImageGrab
import math
import time
import colorsys
from nanoleaf import Aurora
backsplash = Aurora("nanoleaf", "gsFyJGvYGQzs818SsmBgn9eVyYe51WFg")
backsplash.on = True
info = backsplash.info
panel_list = []
for panel in info["panelLayout"]["layout"]["positionData"]:
#print(str(panel["panelId"])+"\t"+str(panel["x"])+"\t"+str(panel["y"]))
x = panel["x"]
y = panel["y"]
angle = math.radians(60)
new_x = math.floor((x * math.cos(angle) + y * math.sin(angle)) / 75 + 2.5)
new_y = 1 - math.floor((-x * math.sin(angle) + y * math.cos(angle)) / 172 +
0.75)
unset_color = (-1, -1, -1)
panel_list.append({
"panelId": str(panel["panelId"]),
"x": new_x,
"y": new_y,
"color": unset_color
})
effect = {"command": "display", "animType": "static", "loop": False}
while True:
im = PIL.ImageGrab.grab()
im.thumbnail([5, 2])
px = im.load()
panel_strings = []
