def parse_options(options):
""" Parse the specified options and initialize all required structures
Note: This modifies global state, specifically, the emulcomm module
"""
if options.ip:
emulcomm.user_ip_interface_preferences = True
# Append this ip to the list of available ones if it is new
for ip in options.ip:
if (True, ip) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((True, ip))
if options.interface:
emulcomm.user_ip_interface_preferences = True
# Append this interface to the list of available ones if it is new
for interface in options.interface:
if (False, interface
) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append(
(False, interface))
# Check if they have told us to only use explicitly allowed IP's and interfaces
if options.nootherips:
# Set user preference to True
emulcomm.user_ip_interface_preferences = True
# Disable nonspecified IP's
emulcomm.allow_nonspecified_ips = False
# set up the circular log buffer...
# Armon: Initialize the circular logger before starting the nanny
if options.logfile:
# time to set up the circular logger
loggerfo = loggingrepy.circular_logger(options.logfile)
# and redirect err and out there...
sys.stdout = loggerfo
sys.stderr = loggerfo
else:
# let's make it so that the output (via print) is always flushed
sys.stdout = loggingrepy.flush_logger(sys.stdout)
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(options.servicelog, repy_constants.REPY_START_DIR)
# Set Current Working Directory
if options.cwd:
os.chdir(options.cwd)
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(options.stopfile, options.statusfile)
# Write out our initial status
statusstorage.write_status("Started")
def parse_options(options):
""" Parse the specified options and initialize all required structures
Note: This modifies global state, specifically, the emulcomm module
"""
if options.ip:
emulcomm.user_ip_interface_preferences = True
# Append this ip to the list of available ones if it is new
for ip in options.ip:
if (True, ip) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((True, ip))
if options.interface:
emulcomm.user_ip_interface_preferences = True
# Append this interface to the list of available ones if it is new
for interface in options.interface:
if (False, interface) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((False, interface))
# Check if they have told us to only use explicitly allowed IP's and interfaces
if options.nootherips:
# Set user preference to True
emulcomm.user_ip_interface_preferences = True
# Disable nonspecified IP's
emulcomm.allow_nonspecified_ips = False
# set up the circular log buffer...
# Armon: Initialize the circular logger before starting the nanny
if options.logfile:
# time to set up the circular logger
loggerfo = loggingrepy.circular_logger(options.logfile)
# and redirect err and out there...
sys.stdout = loggerfo
sys.stderr = loggerfo
else:
# let's make it so that the output (via print) is always flushed
sys.stdout = loggingrepy.flush_logger(sys.stdout)
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(options.servicelog, repy_constants.REPY_START_DIR)
# Set Current Working Directory
if options.cwd:
os.chdir(options.cwd)
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(options.stopfile, options.statusfile)
# Write out our initial status
statusstorage.write_status("Started")
def repy_main(argv=sys.argv):
"""Run repy with these command line arguments"""
global simpleexec
global logfile
# Armon: The CMD line path to repy is the first argument
repy_location = argv[0]
# Get the directory repy is in
repy_directory = os.path.dirname(repy_location)
# Translate into an absolute path
if os.path.isabs(repy_directory):
absolute_repy_directory = repy_directory
else:
# This will join the currect directory with the relative path
# and then get the absolute path to that location
absolute_repy_directory = os.path.abspath(os.path.join(os.getcwd(), repy_directory))
# Store the absolute path as the repy startup directory
repy_constants.REPY_START_DIR = absolute_repy_directory
# For security, we need to make sure that the Python path doesn't change even
# if the directory does...
newsyspath = []
for item in sys.path[:]:
if item == '' or item == '.':
newsyspath.append(os.getcwd())
else:
newsyspath.append(item)
# It should be safe now. I'm assuming the user isn't trying to undercut us
# by setting a crazy python path
sys.path = newsyspath
args = argv[1:]
try:
optlist, fnlist = getopt.getopt(args, '', [
'simple', 'ip=', 'iface=', 'nootherips', 'logfile=',
'stop=', 'status=', 'cwd=', 'servicelog', 'safebinary'
])
except getopt.GetoptError:
usage()
sys.exit(1)
# Set up the simple variable if needed
simpleexec = False
# By default we don't want to use the service logger
servicelog = False
# Default logfile (if the option --logfile isn't passed)
logfile = None
# Default stopfile (if the option --stopfile isn't passed)
stopfile = None
# Default stopfile (if the option --stopfile isn't passed)
statusfile = None
if len(fnlist) < 2:
usage("Must supply a resource file and a program file to execute")
sys.exit(1)
for option, value in optlist:
if option == '--simple':
simpleexec = True
elif option == '--ip':
emulcomm.user_ip_interface_preferences = True
# Append this ip to the list of available ones if it is new, since
# multiple IP's may be specified
if (True, value) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((True, value))
elif option == '--iface':
emulcomm.user_ip_interface_preferences = True
# Append this interface to the list of available ones if it is new
if (False, value) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((False, value))
# Check if they have told us explicitly not to allow other IP's
elif option == '--nootherips':
# Set user preference to True
emulcomm.user_ip_interface_preferences = True
# Disable nonspecified IP's
emulcomm.allow_nonspecified_ips = False
elif option == '--logfile':
# set up the circular log buffer...
logfile = value
elif option == '--stop':
# Watch for the creation of this file and abort when it happens...
stopfile = value
elif option == '--status':
# Write status information into this file...
statusfile = value
# Set Current Working Directory
elif option == '--cwd':
os.chdir(value)
# Enable logging of internal errors to the service logger.
elif option == '--servicelog':
servicelog = True
# Enable safe binary mode
elif option == '--safebinary':
safebinary.SAFEBINARY = True
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(stopfile, statusfile)
# Write out our initial status
statusstorage.write_status("Started")
resourcefn = fnlist[0]
progname = fnlist[1]
progargs = fnlist[2:]
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(servicelog, absolute_repy_directory)
try:
main(resourcefn, progname, progargs)
except SystemExit:
harshexit.harshexit(4)
except:
tracebackrepy.handle_exception()
harshexit.harshexit(3)
# Write status information into this file...
statusfile = value
# Set Current Working Directory
elif option == '--cwd':
os.chdir(value)
# Enable logging of internal errors to the service logger.
elif option == '--servicelog':
servicelog = True
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(stopfile, statusfile)
# Write out our initial status
statusstorage.write_status("Started")
restrictionsfn = fnlist[0]
progname = fnlist[1]
progargs = fnlist[2:]
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(servicelog, absolute_repy_directory)
try:
main(restrictionsfn, progname, progargs)
elif option == '--cwd':
os.chdir(value)
# Enable logging of internal errors to the service logger.
elif option == '--servicelog':
servicelog = True
# Insert program execution separators and log calling information
elif option == '--execinfo':
displayexecinfo = True
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(stopfile, statusfile)
# Write out our initial status
statusstorage.write_status("Started")
restrictionsfn = fnlist[0]
progname = fnlist[1]
progargs = fnlist[2:]
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(servicelog, absolute_repy_directory)
try:
main(restrictionsfn, progname, progargs)
def repy_main(argv=sys.argv):
"""Run repy with these command line arguments"""
global simpleexec
global logfile
# Armon: The CMD line path to repy is the first argument
repy_location = argv[0]
# Get the directory repy is in
repy_directory = os.path.dirname(repy_location)
# Translate into an absolute path
if os.path.isabs(repy_directory):
absolute_repy_directory = repy_directory
else:
# This will join the currect directory with the relative path
# and then get the absolute path to that location
absolute_repy_directory = os.path.abspath(
os.path.join(os.getcwd(), repy_directory))
# Store the absolute path as the repy startup directory
repy_constants.REPY_START_DIR = absolute_repy_directory
# For security, we need to make sure that the Python path doesn't change even
# if the directory does...
newsyspath = []
for item in sys.path[:]:
if item == '' or item == '.':
newsyspath.append(os.getcwd())
else:
newsyspath.append(item)
# It should be safe now. I'm assuming the user isn't trying to undercut us
# by setting a crazy python path
sys.path = newsyspath
args = argv[1:]
try:
optlist, fnlist = getopt.getopt(args, '', [
'simple', 'ip=', 'iface=', 'nootherips', 'logfile=', 'stop=',
'status=', 'cwd=', 'servicelog', 'safebinary'
])
except getopt.GetoptError:
usage()
sys.exit(1)
# Set up the simple variable if needed
simpleexec = False
# By default we don't want to use the service logger
servicelog = False
# Default logfile (if the option --logfile isn't passed)
logfile = None
# Default stopfile (if the option --stopfile isn't passed)
stopfile = None
# Default stopfile (if the option --stopfile isn't passed)
statusfile = None
if len(fnlist) < 2:
usage("Must supply a resource file and a program file to execute")
sys.exit(1)
for option, value in optlist:
if option == '--simple':
simpleexec = True
elif option == '--ip':
emulcomm.user_ip_interface_preferences = True
# Append this ip to the list of available ones if it is new, since
# multiple IP's may be specified
if (True, value) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append((True, value))
elif option == '--iface':
emulcomm.user_ip_interface_preferences = True
# Append this interface to the list of available ones if it is new
if (False, value) not in emulcomm.user_specified_ip_interface_list:
emulcomm.user_specified_ip_interface_list.append(
(False, value))
# Check if they have told us explicitly not to allow other IP's
elif option == '--nootherips':
# Set user preference to True
emulcomm.user_ip_interface_preferences = True
# Disable nonspecified IP's
emulcomm.allow_nonspecified_ips = False
elif option == '--logfile':
# set up the circular log buffer...
logfile = value
elif option == '--stop':
# Watch for the creation of this file and abort when it happens...
stopfile = value
elif option == '--status':
# Write status information into this file...
statusfile = value
# Set Current Working Directory
elif option == '--cwd':
os.chdir(value)
# Enable logging of internal errors to the service logger.
elif option == '--servicelog':
servicelog = True
# Enable safe binary mode
elif option == '--safebinary':
safebinary.SAFEBINARY = True
# Update repy current directory
repy_constants.REPY_CURRENT_DIR = os.path.abspath(os.getcwd())
# Initialize the NM status interface
nmstatusinterface.init(stopfile, statusfile)
# Write out our initial status
statusstorage.write_status("Started")
resourcefn = fnlist[0]
progname = fnlist[1]
progargs = fnlist[2:]
# We also need to pass in whether or not we are going to be using the service
# log for repy. We provide the repy directory so that the vessel information
# can be found regardless of where we are called from...
tracebackrepy.initialize(servicelog, absolute_repy_directory)
return init_namespace(resourcefn, progname, progargs)