def main():
"""
NAME
di_tilt.py
DESCRIPTION
rotates geographic coordinate dec, inc data to stratigraphic
coordinates using the dip and dip direction (strike+90, dip if dip to right of strike)
INPUT FORMAT
declination inclination dip_direction dip
SYNTAX
di_tilt.py [-h][-i][-f FILE] [< filename ]
OPTIONS
-h prints help message and quits
-i for interactive data entry
-f FILE command line entry of file name
-F OFILE, specify output file, default is standard output
OUTPUT:
declination inclination
"""
if '-h' in sys.argv:
print main.__doc__
sys.exit()
if '-F' in sys.argv:
ind=sys.argv.index('-F')
ofile=sys.argv[ind+1]
out=open(ofile,'w')
print ofile, ' opened for output'
else: ofile=""
if '-i' in sys.argv: # interactive flag
while 1:
try:
Dec=float(raw_input("Declination: <cntl-D> to quit "))
except:
print "\n Good-bye\n"
sys.exit()
Inc=float(raw_input("Inclination: "))
Dip_dir=float(raw_input("Dip direction: "))
Dip=float(raw_input("Dip: "))
print '%7.1f %7.1f'%(pmag.dotilt(Dec,Inc,Dip_dir,Dip))
elif '-f' in sys.argv:
ind=sys.argv.index('-f')
file=sys.argv[ind+1]
data=numpy.loadtxt(file)
else:
data=numpy.loadtxt(sys.stdin,dtype=numpy.float) # read in the data from the datafile
D,I=pmag.dotilt_V(data)
for k in range(len(D)):
if ofile=="":
print '%7.1f %7.1f'%(D[k],I[k])
else:
out.write('%7.1f %7.1f\n'%(D[k],I[k]))
def main():
"""
NAME
foldtest.py
DESCRIPTION
does a fold test (Tauxe, 2010) on data
INPUT FORMAT
dec inc dip_direction dip
SYNTAX
foldtest.py [command line options]
OPTIONS
-h prints help message and quits
-f FILE file with input data
-F FILE for confidence bounds on fold test
-u ANGLE (circular standard deviation) for uncertainty on bedding poles
-b MIN MAX bounds for quick search of percent untilting [default is -10 to 150%]
-n NB number of bootstrap samples [default is 1000]
-fmt FMT, specify format - default is svg
OUTPUT PLOTS
Geographic: is an equal area projection of the input data in
original coordinates
Stratigraphic: is an equal area projection of the input data in
tilt adjusted coordinates
% Untilting: The dashed (red) curves are representative plots of
maximum eigenvalue (tau_1) as a function of untilting
The solid line is the cumulative distribution of the
% Untilting required to maximize tau for all the
bootstrapped data sets. The dashed vertical lines
are 95% confidence bounds on the % untilting that yields
the most clustered result (maximum tau_1).
Command line: prints out the bootstrapped iterations and
finally the confidence bounds on optimum untilting.
If the 95% conf bounds include 0, then a pre-tilt magnetization is indicated
If the 95% conf bounds include 100, then a post-tilt magnetization is indicated
If the 95% conf bounds exclude both 0 and 100, syn-tilt magnetization is
possible as is vertical axis rotation or other pathologies
Geographic: is an equal area projection of the input data in
OPTIONAL OUTPUT FILE:
The output file has the % untilting within the 95% confidence bounds
nd the number of bootstrap samples
"""
kappa=0
fmt='svg'
nb=1000 # number of bootstraps
min,max=-10,150
if '-h' in sys.argv: # check if help is needed
print main.__doc__
sys.exit() # graceful quit
if '-F' in sys.argv:
ind=sys.argv.index('-F')
outfile=open(sys.argv[ind+1],'w')
else:
outfile=""
if '-f' in sys.argv:
ind=sys.argv.index('-f')
file=sys.argv[ind+1]
DIDDs=numpy.loadtxt(file)
else:
print main.__doc__
sys.exit()
if '-fmt' in sys.argv:
ind=sys.argv.index('-fmt')
fmt=sys.argv[ind+1]
if '-b' in sys.argv:
ind=sys.argv.index('-b')
min=float(sys.argv[ind+1])
max=float(sys.argv[ind+2])
if '-n' in sys.argv:
ind=sys.argv.index('-n')
nb=int(sys.argv[ind+1])
if '-u' in sys.argv:
ind=sys.argv.index('-u')
csd=float(sys.argv[ind+1])
kappa=(81./csd)**2
#
# get to work
#
PLTS={'geo':1,'strat':2,'taus':3} # make plot dictionary
pmagplotlib.plot_init(PLTS['geo'],5,5)
pmagplotlib.plot_init(PLTS['strat'],5,5)
pmagplotlib.plot_init(PLTS['taus'],5,5)
pmagplotlib.plotEQ(PLTS['geo'],DIDDs,'Geographic')
D,I=pmag.dotilt_V(DIDDs)
TCs=numpy.array([D,I]).transpose()
pmagplotlib.plotEQ(PLTS['strat'],TCs,'Stratigraphic')
pmagplotlib.drawFIGS(PLTS)
Percs=range(min,max)
Cdf,Untilt=[],[]
pylab.figure(num=PLTS['taus'])
print 'doing ',nb,' iterations...please be patient.....'
for n in range(nb): # do bootstrap data sets - plot first 25 as dashed red line
if n%50==0:print n
Taus=[] # set up lists for taus
PDs=pmag.pseudo(DIDDs)
if kappa!=0:
for k in range(len(PDs)):
d,i=pmag.fshdev(kappa)
dipdir,dip=pmag.dodirot(d,i,PDs[k][2],PDs[k][3])
PDs[k][2]=dipdir
PDs[k][3]=dip
for perc in Percs:
tilt=numpy.array([1.,1.,1.,0.01*perc])
D,I=pmag.dotilt_V(PDs*tilt)
TCs=numpy.array([D,I]).transpose()
ppars=pmag.doprinc(TCs) # get principal directions
Taus.append(ppars['tau1'])
if n<25:pylab.plot(Percs,Taus,'r--')
Untilt.append(Percs[Taus.index(numpy.max(Taus))]) # tilt that gives maximum tau
Cdf.append(float(n)/float(nb))
pylab.plot(Percs,Taus,'k')
pylab.xlabel('% Untilting')
pylab.ylabel('tau_1 (red), CDF (green)')
Untilt.sort() # now for CDF of tilt of maximum tau
pylab.plot(Untilt,Cdf,'g')
lower=int(.025*nb)
upper=int(.975*nb)
pylab.axvline(x=Untilt[lower],ymin=0,ymax=1,linewidth=1,linestyle='--')
pylab.axvline(x=Untilt[upper],ymin=0,ymax=1,linewidth=1,linestyle='--')
tit= '%i - %i %s'%(Untilt[lower],Untilt[upper],'Percent Unfolding')
print tit
print 'range of all bootstrap samples: ', Untilt[0], ' - ', Untilt[-1]
pylab.title(tit)
outstring= '%i - %i; %i\n'%(Untilt[lower],Untilt[upper],nb)
if outfile!="":outfile.write(outstring)
pmagplotlib.drawFIGS(PLTS)
ans= raw_input('S[a]ve all figures, <Return> to quit ')
if ans!='a':
print "Good bye"
sys.exit()
else:
files={}
for key in PLTS.keys():
files[key]=('foldtest_'+'%s'%(key.strip()[:2])+'.'+fmt)
pmagplotlib.saveP(PLTS,files)
def main():
"""
NAME
foldtest_magic.py
DESCRIPTION
does a fold test (Tauxe, 2010) on data
INPUT FORMAT
pmag_specimens format file, er_samples.txt format file (for bedding)
SYNTAX
foldtest_magic.py [command line options]
OPTIONS
-h prints help message and quits
-f pmag_sites formatted file [default is pmag_sites.txt]
-fsa er_samples formatted file [default is er_samples.txt]
-exc use pmag_criteria.txt to set acceptance criteria
-n NB, set number of bootstraps, default is 1000
-b MIN, MAX, set bounds for untilting, default is -10, 150
-fmt FMT, specify format - default is svg
OUTPUT
Geographic: is an equal area projection of the input data in
original coordinates
Stratigraphic: is an equal area projection of the input data in
tilt adjusted coordinates
% Untilting: The dashed (red) curves are representative plots of
maximum eigenvalue (tau_1) as a function of untilting
The solid line is the cumulative distribution of the
% Untilting required to maximize tau for all the
bootstrapped data sets. The dashed vertical lines
are 95% confidence bounds on the % untilting that yields
the most clustered result (maximum tau_1).
Command line: prints out the bootstrapped iterations and
finally the confidence bounds on optimum untilting.
If the 95% conf bounds include 0, then a pre-tilt magnetization is indicated
If the 95% conf bounds include 100, then a post-tilt magnetization is indicated
If the 95% conf bounds exclude both 0 and 100, syn-tilt magnetization is
possible as is vertical axis rotation or other pathologies
"""
kappa=0
nb=1000 # number of bootstraps
min,max=-10,150
dir_path='.'
infile,orfile='pmag_sites.txt','er_samples.txt'
critfile='pmag_criteria.txt'
fmt='svg'
if '-WD' in sys.argv:
ind=sys.argv.index('-WD')
dir_path=sys.argv[ind+1]
if '-h' in sys.argv: # check if help is needed
print main.__doc__
sys.exit() # graceful quit
if '-n' in sys.argv:
ind=sys.argv.index('-n')
nb=int(sys.argv[ind+1])
if '-fmt' in sys.argv:
ind=sys.argv.index('-fmt')
fmt=sys.argv[ind+1]
if '-b' in sys.argv:
ind=sys.argv.index('-b')
min=int(sys.argv[ind+1])
max=int(sys.argv[ind+2])
if '-f' in sys.argv:
ind=sys.argv.index('-f')
infile=sys.argv[ind+1]
if '-fsa' in sys.argv:
ind=sys.argv.index('-fsa')
orfile=sys.argv[ind+1]
orfile=dir_path+'/'+orfile
infile=dir_path+'/'+infile
critfile=dir_path+'/'+critfile
data,file_type=pmag.magic_read(infile)
ordata,file_type=pmag.magic_read(orfile)
if '-exc' in sys.argv:
crits,file_type=pmag.magic_read(critfile)
for crit in crits:
if crit['pmag_criteria_code']=="DE-SITE":
SiteCrit=crit
break
# get to work
#
PLTS={'geo':1,'strat':2,'taus':3} # make plot dictionary
pmagplotlib.plot_init(PLTS['geo'],5,5)
pmagplotlib.plot_init(PLTS['strat'],5,5)
pmagplotlib.plot_init(PLTS['taus'],5,5)
GEOrecs=pmag.get_dictitem(data,'site_tilt_correction','0','T')
if len(GEOrecs)>0: # have some geographic data
DIDDs= [] # set up list for dec inc dip_direction, dip
for rec in GEOrecs: # parse data
dip,dip_dir=0,-1
Dec=float(rec['site_dec'])
Inc=float(rec['site_inc'])
orecs=pmag.get_dictitem(ordata,'er_site_name',rec['er_site_name'],'T')
if len(orecs)>0:
if orecs[0]['sample_bed_dip_direction']!="":dip_dir=float(orecs[0]['sample_bed_dip_direction'])
if orecs[0]['sample_bed_dip']!="":dip=float(orecs[0]['sample_bed_dip'])
if dip!=0 and dip_dir!=-1:
if '-exc' in sys.argv:
keep=1
for key in SiteCrit.keys():
if 'site' in key and SiteCrit[key]!="" and rec[key]!="" and key!='site_alpha95':
if float(rec[key])<float(SiteCrit[key]):
keep=0
print rec['er_site_name'],key,rec[key]
if key=='site_alpha95' and SiteCrit[key]!="" and rec[key]!="":
if float(rec[key])>float(SiteCrit[key]):
keep=0
if keep==1: DIDDs.append([Dec,Inc,dip_dir,dip])
else:
DIDDs.append([Dec,Inc,dip_dir,dip])
else:
print 'no geographic directional data found'
sys.exit()
pmagplotlib.plotEQ(PLTS['geo'],DIDDs,'Geographic')
data=numpy.array(DIDDs)
D,I=pmag.dotilt_V(data)
TCs=numpy.array([D,I]).transpose()
pmagplotlib.plotEQ(PLTS['strat'],TCs,'Stratigraphic')
pmagplotlib.drawFIGS(PLTS)
Percs=range(min,max)
Cdf,Untilt=[],[]
pylab.figure(num=PLTS['taus'])
print 'doing ',nb,' iterations...please be patient.....'
for n in range(nb): # do bootstrap data sets - plot first 25 as dashed red line
if n%50==0:print n
Taus=[] # set up lists for taus
PDs=pmag.pseudo(DIDDs)
if kappa!=0:
for k in range(len(PDs)):
d,i=pmag.fshdev(kappa)
dipdir,dip=pmag.dodirot(d,i,PDs[k][2],PDs[k][3])
PDs[k][2]=dipdir
PDs[k][3]=dip
for perc in Percs:
tilt=numpy.array([1.,1.,1.,0.01*perc])
D,I=pmag.dotilt_V(PDs*tilt)
TCs=numpy.array([D,I]).transpose()
ppars=pmag.doprinc(TCs) # get principal directions
Taus.append(ppars['tau1'])
if n<25:pylab.plot(Percs,Taus,'r--')
Untilt.append(Percs[Taus.index(numpy.max(Taus))]) # tilt that gives maximum tau
Cdf.append(float(n)/float(nb))
pylab.plot(Percs,Taus,'k')
pylab.xlabel('% Untilting')
pylab.ylabel('tau_1 (red), CDF (green)')
Untilt.sort() # now for CDF of tilt of maximum tau
pylab.plot(Untilt,Cdf,'g')
lower=int(.025*nb)
upper=int(.975*nb)
pylab.axvline(x=Untilt[lower],ymin=0,ymax=1,linewidth=1,linestyle='--')
pylab.axvline(x=Untilt[upper],ymin=0,ymax=1,linewidth=1,linestyle='--')
tit= '%i - %i %s'%(Untilt[lower],Untilt[upper],'Percent Unfolding')
print tit
pylab.title(tit)
pmagplotlib.drawFIGS(PLTS)
ans= raw_input('S[a]ve all figures, <Return> to quit \n ')
if ans!='a':
print "Good bye"
sys.exit()
files={}
for key in PLTS.keys():
files[key]=('foldtest_'+'%s'%(key.strip()[:2])+'.'+fmt)
pmagplotlib.saveP(PLTS,files)