def load_checkpoint(
self, path: _PATH, map_location: Optional[Callable] = lambda storage, loc: storage
) -> Dict[str, Any]:
"""Loads checkpoint using :func:`torch.load`, with additional handling for ``fsspec`` remote loading of
files.
Args:
path: Path to checkpoint
map_location: a function, :class:`torch.device`, string or a dict specifying how to remap storage
locations.
Returns: The loaded checkpoint.
Raises:
FileNotFoundError: If ``path`` is not found by the ``fsspec`` filesystem
"""
# Try to read the checkpoint at `path`. If not exist, do not restore checkpoint.
fs = get_filesystem(path)
if not fs.exists(path):
raise FileNotFoundError(f"Checkpoint at {path} not found. Aborting training.")
return pl_load(path, map_location=map_location)
def __init_ckpt_dir(self, filepath, save_top_k):
self._fs = get_filesystem(filepath if filepath is not None else "")
if (
save_top_k is not None
and save_top_k > 0
and filepath is not None
and self._fs.isdir(filepath)
and len(self._fs.ls(filepath)) > 0
):
rank_zero_warn(
f"Checkpoint directory {filepath} exists and is not empty with save_top_k={save_top_k}"
" All files in this directory will be deleted when a checkpoint is saved!"
)
if not filepath: # will be determined by trainer at runtime
self.dirpath, self.filename = None, None
else:
if self._fs.isdir(filepath):
self.dirpath, self.filename = filepath, None
else:
if self._fs.protocol == "file": # dont normalize remote paths
filepath = os.path.realpath(filepath)
self.dirpath, self.filename = os.path.split(filepath)
def __init__(self,
output_filename: Optional[str] = None,
line_count_restriction: float = 1.0):
"""
Args:
output_filename: optionally save profile results to file instead of printing
to std out when training is finished.
line_count_restriction: this can be used to limit the number of functions
reported for each action. either an integer (to select a count of lines),
or a decimal fraction between 0.0 and 1.0 inclusive (to select a percentage of lines)
"""
self.profiled_actions = {}
self.line_count_restriction = line_count_restriction
self.output_fname = output_filename
self.output_file = None
if self.output_fname:
fs = get_filesystem(self.output_fname)
self.output_file = fs.open(self.output_fname, "w")
streaming_out = [self.output_file.write
] if self.output_file else [log.info]
super().__init__(output_streams=streaming_out)
def hpc_save(self, folderpath: str, logger):
# make sure the checkpoint folder exists
folderpath = str(folderpath) # because the tests pass a path object
fs = get_filesystem(folderpath)
fs.makedirs(folderpath, exist_ok=True)
# save logger to make sure we get all the metrics
logger.save()
max_suffix = self.max_ckpt_in_folder(folderpath)
ckpt_number = (max_suffix if max_suffix is not None else 0) + 1
fs.makedirs(folderpath, exist_ok=True)
filepath = os.path.join(folderpath, f'hpc_ckpt_{ckpt_number}.ckpt')
# give model a chance to do something on hpc_save
model = self.trainer.get_model()
checkpoint = self.dump_checkpoint()
model.on_hpc_save(checkpoint)
if self.trainer.accelerator_backend:
checkpoint = self.trainer.accelerator_backend.on_save(checkpoint)
# do the actual save
# TODO: fix for anything with multiprocess DP, DDP, DDP2
try:
atomic_save(checkpoint, filepath)
except AttributeError as err:
if LightningModule.CHECKPOINT_HYPER_PARAMS_KEY in checkpoint:
del checkpoint[LightningModule.CHECKPOINT_HYPER_PARAMS_KEY]
rank_zero_warn(
'warning, `hyper_parameters` dropped from checkpoint.' f' An attribute is not picklable {err}'
)
atomic_save(checkpoint, filepath)
return filepath
def hpc_save(self, folderpath: str,
logger: Optional[LightningLoggerBase]) -> str:
# make sure the checkpoint folder exists
folderpath = str(folderpath) # because the tests pass a path object
fs = get_filesystem(folderpath)
fs.makedirs(folderpath, exist_ok=True)
# save logger to make sure we get all the metrics
if logger:
logger.finalize("finished")
max_suffix = self.max_ckpt_version_in_folder(folderpath)
ckpt_number = (max_suffix if max_suffix is not None else 0) + 1
fs.makedirs(folderpath, exist_ok=True)
filepath = os.path.join(folderpath, f"hpc_ckpt_{ckpt_number}.ckpt")
# give model a chance to do something on hpc_save
model = self.trainer.lightning_module
checkpoint = self.dump_checkpoint()
# TODO: remove this in v1.8.
model.on_hpc_save(checkpoint)
# do the actual save
# TODO: fix for anything with multiprocess DP, DDP, DDP2
try:
atomic_save(checkpoint, filepath)
except AttributeError as err:
if pl.LightningModule.CHECKPOINT_HYPER_PARAMS_KEY in checkpoint:
del checkpoint[pl.LightningModule.CHECKPOINT_HYPER_PARAMS_KEY]
rank_zero_warn(
f"warning, `hyper_parameters` dropped from checkpoint. An attribute is not picklable {err}"
)
atomic_save(checkpoint, filepath)
return filepath
def setup(self,
trainer: Trainer,
pl_module: LightningModule,
stage: Optional[str] = None) -> None:
# save the config in `setup` because (1) we want it to save regardless of the trainer function run
# and we want to save before processes are spawned
log_dir = trainer.log_dir # this broadcasts the directory
assert log_dir is not None
config_path = os.path.join(log_dir, self.config_filename)
fs = get_filesystem(log_dir)
if not self.overwrite:
# check if the file exists on rank 0
file_exists = fs.isfile(
config_path) if trainer.is_global_zero else False
# broadcast whether to fail to all ranks
file_exists = trainer.strategy.broadcast(file_exists)
if file_exists:
raise RuntimeError(
f"{self.__class__.__name__} expected {config_path} to NOT exist. Aborting to avoid overwriting"
" results of a previous run. You can delete the previous config file,"
" set `LightningCLI(save_config_callback=None)` to disable config saving,"
" or set `LightningCLI(save_config_overwrite=True)` to overwrite the config file."
)
# save the file on rank 0
if trainer.is_global_zero:
# save only on rank zero to avoid race conditions on DDP.
# the `log_dir` needs to be created as we rely on the logger to do it usually
# but it hasn't logged anything at this point
fs.makedirs(log_dir, exist_ok=True)
self.parser.save(self.config,
config_path,
skip_none=False,
overwrite=self.overwrite,
multifile=self.multifile)
def to_disk(self) -> None:
"""Write predictions to file(s).
"""
for filepath, predictions in self.predictions.items():
fs = get_filesystem(filepath)
# normalize local filepaths only
if fs.protocol == "file":
filepath = os.path.realpath(filepath)
if self.world_size > 1:
stem, extension = os.path.splitext(filepath)
filepath = f"{stem}_rank_{self.global_rank}{extension}"
dirpath = os.path.split(filepath)[0]
fs.mkdirs(dirpath, exist_ok=True)
# Convert any tensor values to list
predictions = {
k: v if not isinstance(v, Tensor) else v.tolist()
for k, v in predictions.items()
}
# Check if all features for this file add up to same length
feature_lens = {k: len(v) for k, v in predictions.items()}
if len(set(feature_lens.values())) != 1:
raise ValueError(
"Mismatching feature column lengths found in stored EvalResult predictions."
)
# Switch predictions so each entry has its own dict
outputs = []
for values in zip(*predictions.values()):
output_element = dict(zip(predictions.keys(), values))
outputs.append(output_element)
# Write predictions for current file to disk
with fs.open(filepath, "wb") as fp:
torch.save(outputs, fp)
def __init__(
self,
save_dir: str,
name: Optional[str] = "default",
version: Optional[Union[int, str]] = None,
log_graph: bool = False,
default_hp_metric: bool = True,
prefix: str = "",
sub_dir: Optional[str] = None,
**kwargs,
):
super().__init__()
self._save_dir = save_dir
self._name = name or ""
self._version = version
self._sub_dir = sub_dir
self._log_graph = log_graph
self._default_hp_metric = default_hp_metric
self._prefix = prefix
self._fs = get_filesystem(save_dir)
self._experiment = None
self.hparams = {}
self._kwargs = kwargs
def restore(self, checkpoint_path: str, on_gpu: bool) -> bool:
"""
Load model/training states from a 'PyTorch-Lightning checkpoint' file through file-read and state-restore.
All restored states are listed in return value description of `dump_checkpoint`.
"""
# Try to read the checkpoint file at `checkpoint_path`. If not exist, do not restore checkpoint.
fs = get_filesystem(checkpoint_path)
if not fs.exists(checkpoint_path):
raise FileNotFoundError(f"Checkpoint at {checkpoint_path} not found. Aborting training.")
checkpoint, load_optimizer_states = self.trainer.training_type_plugin.restore_model_state_from_ckpt_path(
checkpoint_path, map_location=lambda storage, loc: storage
)
model = self.trainer.lightning_module
if on_gpu:
model.cuda(self.trainer.root_gpu)
# restore training state
self.restore_training_state(checkpoint, load_optimizer_states)
rank_zero_info(f"Restored states from the checkpoint file at {checkpoint_path}")
return True
def test_torchscript_save_load_custom_filesystem(tmpdir, modelclass):
""" Test that scripted LightningModule is correctly saved and can be loaded with custom filesystems. """
_DUMMY_PRFEIX = "dummy"
_PREFIX_SEPARATOR = "://"
class DummyFileSystem(LocalFileSystem):
...
fsspec.register_implementation(_DUMMY_PRFEIX,
DummyFileSystem,
clobber=True)
model = modelclass()
output_file = os.path.join(_DUMMY_PRFEIX, _PREFIX_SEPARATOR, tmpdir,
"model.pt")
script = model.to_torchscript(file_path=output_file)
fs = get_filesystem(output_file)
with fs.open(output_file, "rb") as f:
loaded_script = torch.jit.load(f)
assert torch.allclose(next(script.parameters()),
next(loaded_script.parameters()))
def _split_train_test_data(data: Dict,
multi_label: bool = False) -> List[Dict]:
file_path = data.get("export_json", None)
if not file_path:
raise MisconfigurationException(
"The key `export_json` should be provided as a string.")
fs = get_filesystem(file_path)
with fs.open(file_path) as f:
raw_data = np.asarray(json.load(f))
train_raw_data = []
test_raw_data = []
for task in raw_data:
for annotation in task["annotations"]:
if annotation["ground_truth"]:
test_raw_data.append(task)
elif not annotation["ground_truth"]:
train_raw_data.append(task)
break
assert len(raw_data) == len(train_raw_data) + len(test_raw_data)
dirname = os.path.dirname(file_path)
basename = os.path.basename(file_path)
results = []
for stage, raw_data in [("train", train_raw_data),
("test", test_raw_data)]:
filename = basename if stage in basename else f"{stage}_{basename}"
export_path = os.path.join(dirname, filename)
LabelStudioInput._export_data_to_json(export_path, raw_data)
output_data = deepcopy(data)
output_data["export_json"] = export_path
results.append(output_data)
return results
def test_get_filesystem_local_filesystem():
assert isinstance(get_filesystem("tmpdir/tmp_file"), LocalFileSystem)
def scale_batch_size(
trainer: 'pl.Trainer',
model: 'pl.LightningModule',
mode: str = 'power',
steps_per_trial: int = 3,
init_val: int = 2,
max_trials: int = 25,
batch_arg_name: str = 'batch_size',
) -> Optional[int]:
"""See :meth:`~pytorch_lightning.tuner.tuning.Tuner.scale_batch_size`"""
if trainer.fast_dev_run:
rank_zero_warn(
'Skipping batch size scaler since fast_dev_run is enabled.',
UserWarning)
return
if not lightning_hasattr(model, batch_arg_name):
raise MisconfigurationException(
f'Field {batch_arg_name} not found in both `model` and `model.hparams`'
)
if hasattr(model, batch_arg_name) and hasattr(
model, "hparams") and batch_arg_name in model.hparams:
rank_zero_warn(
f'Field `model.{batch_arg_name}` and `model.hparams.{batch_arg_name}` are mutually exclusive!'
f' `model.{batch_arg_name}` will be used as the initial batch size for scaling.'
f' If this is not the intended behavior, please remove either one.'
)
if hasattr(model.train_dataloader, 'patch_loader_code'):
raise MisconfigurationException(
'The batch scaling feature cannot be used with dataloaders passed directly to `.fit()`.'
' Please disable the feature or incorporate the dataloader into the model.'
)
# Arguments we adjust during the batch size finder, save for restoring
__scale_batch_dump_params(trainer)
# Set to values that are required by the algorithm
__scale_batch_reset_params(trainer, model, steps_per_trial)
# Save initial model, that is loaded after batch size is found
save_path = os.path.join(trainer.default_root_dir,
'scale_batch_size_temp_model.ckpt')
trainer.save_checkpoint(str(save_path))
if trainer.progress_bar_callback:
trainer.progress_bar_callback.disable()
# Initially we just double in size until an OOM is encountered
new_size, _ = _adjust_batch_size(
trainer, batch_arg_name, value=init_val) # initially set to init_val
if mode == 'power':
new_size = _run_power_scaling(trainer, model, new_size, batch_arg_name,
max_trials)
elif mode == 'binsearch':
new_size = _run_binsearch_scaling(trainer, model, new_size,
batch_arg_name, max_trials)
else:
raise ValueError(
'mode in method `scale_batch_size` could either be `power` or `binsearch`'
)
garbage_collection_cuda()
log.info(
f'Finished batch size finder, will continue with full run using batch size {new_size}'
)
# Restore initial state of model
if trainer.is_global_zero:
trainer.checkpoint_connector.restore(str(save_path))
fs = get_filesystem(str(save_path))
if fs.exists(save_path):
fs.rm(save_path)
# Finish by resetting variables so trainer is ready to fit model
__scale_batch_restore_params(trainer)
if trainer.progress_bar_callback:
trainer.progress_bar_callback.enable()
return new_size
def lr_find(
trainer,
model: LightningModule,
train_dataloader: Optional[DataLoader] = None,
val_dataloaders: Optional[Union[DataLoader, List[DataLoader]]] = None,
min_lr: float = 1e-8,
max_lr: float = 1,
num_training: int = 100,
mode: str = 'exponential',
early_stop_threshold: float = 4.0,
datamodule: Optional[LightningDataModule] = None,
update_attr: bool = False,
):
r"""
``lr_find`` enables the user to do a range test of good initial learning rates,
to reduce the amount of guesswork in picking a good starting learning rate.
Args:
model: Model to do range testing for
train_dataloader: A PyTorch
``DataLoader`` with training samples. If the model has
a predefined train_dataloader method, this will be skipped.
min_lr: minimum learning rate to investigate
max_lr: maximum learning rate to investigate
num_training: number of learning rates to test
mode: Search strategy to update learning rate after each batch:
- ``'exponential'`` (default): Will increase the learning rate exponentially.
- ``'linear'``: Will increase the learning rate linearly.
early_stop_threshold: threshold for stopping the search. If the
loss at any point is larger than early_stop_threshold*best_loss
then the search is stopped. To disable, set to None.
datamodule: An optional ``LightningDataModule`` which holds the training
and validation dataloader(s). Note that the ``train_dataloader`` and
``val_dataloaders`` parameters cannot be used at the same time as
this parameter, or a ``MisconfigurationException`` will be raised.
update_attr: Whether to update the learning rate attribute or not.
Raises:
MisconfigurationException:
If learning rate/lr in ``model`` or ``model.hparams`` isn't overriden when ``auto_lr_find=True``, or
if you are using `more than one optimizer` with learning rate finder.
Example::
# Setup model and trainer
model = MyModelClass(hparams)
trainer = pl.Trainer()
# Run lr finder
lr_finder = trainer.tuner.lr_find(model, ...)
# Inspect results
fig = lr_finder.plot(); fig.show()
suggested_lr = lr_finder.suggestion()
# Overwrite lr and create new model
hparams.lr = suggested_lr
model = MyModelClass(hparams)
# Ready to train with new learning rate
trainer.fit(model)
"""
if trainer.fast_dev_run:
rank_zero_warn('Skipping learning rate finder since fast_dev_run is enabled.', UserWarning)
return
# Determine lr attr
if update_attr:
lr_attr_name = _determine_lr_attr_name(trainer, model)
save_path = os.path.join(trainer.default_root_dir, 'lr_find_temp_model.ckpt')
__lr_finder_dump_params(trainer, model)
# Prevent going into infinite loop
trainer.auto_lr_find = False
# Initialize lr finder object (stores results)
lr_finder = _LRFinder(mode, min_lr, max_lr, num_training)
# Use special lr logger callback
trainer.callbacks = [_LRCallback(num_training, early_stop_threshold, progress_bar_refresh_rate=1)]
# No logging
trainer.logger = DummyLogger()
# Max step set to number of iterations
trainer.max_steps = num_training
# Disable standard progress bar for fit
if trainer.progress_bar_callback:
trainer.progress_bar_callback.disable()
# Required for saving the model
trainer.optimizers, trainer.schedulers = [], [],
trainer.model = model
# Dump model checkpoint
trainer.save_checkpoint(str(save_path))
# Configure optimizer and scheduler
model.configure_optimizers = lr_finder._exchange_scheduler(model.configure_optimizers)
# Fit, lr & loss logged in callback
trainer.fit(model, train_dataloader=train_dataloader, val_dataloaders=val_dataloaders, datamodule=datamodule)
# Prompt if we stopped early
if trainer.global_step != num_training:
log.info('LR finder stopped early due to diverging loss.')
# Transfer results from callback to lr finder object
lr_finder.results.update({'lr': trainer.callbacks[0].lrs, 'loss': trainer.callbacks[0].losses})
lr_finder._total_batch_idx = trainer.total_batch_idx # for debug purpose
# Reset model state
if trainer.is_global_zero:
trainer.checkpoint_connector.restore(str(save_path), on_gpu=trainer._device_type == DeviceType.GPU)
fs = get_filesystem(str(save_path))
if fs.exists(save_path):
fs.rm(save_path)
# Finish by resetting variables so trainer is ready to fit model
__lr_finder_restore_params(trainer, model)
if trainer.progress_bar_callback:
trainer.progress_bar_callback.enable()
# Update lr attr if required
if update_attr:
lr = lr_finder.suggestion()
# TODO: log lr.results to self.logger
lightning_setattr(model, lr_attr_name, lr)
log.info(f'Learning rate set to {lr}')
return lr_finder
def __init__(
self,
filepath: Optional[str] = None,
monitor: Optional[str] = "checkpoint_on",
verbose: bool = False,
save_last: bool = False,
save_top_k: int = 1,
save_weights_only: bool = False,
mode: str = "auto",
period: int = 1,
prefix: str = "",
):
super().__init__()
self._fs = get_filesystem(filepath if filepath is not None else "")
if (
save_top_k > 0
and filepath is not None
and self._fs.isdir(filepath)
and len(self._fs.ls(filepath)) > 0
):
rank_zero_warn(
f"Checkpoint directory {filepath} exists and is not empty with save_top_k != 0."
" All files in this directory will be deleted when a checkpoint is saved!"
)
self.monitor = monitor
self.verbose = verbose
if not filepath: # will be determined by trainer at runtime
self.dirpath, self.filename = None, None
else:
if self._fs.isdir(filepath):
self.dirpath, self.filename = filepath, None
else:
if self._fs.protocol == "file": # dont normalize remote paths
filepath = os.path.realpath(filepath)
self.dirpath, self.filename = os.path.split(filepath)
self._fs.makedirs(self.dirpath, exist_ok=True)
self.save_last = save_last
self.save_top_k = save_top_k
self.save_weights_only = save_weights_only
self.period = period
self.epoch_last_check = None
self.prefix = prefix
self.best_k_models = {}
# {filename: monitor}
self.kth_best_model_path = ""
self.best_model_score = 0
self.best_model_path = ""
self.last_model_path = ""
self.save_function = None
self.warned_result_obj = False
torch_inf = torch.tensor(np.Inf)
mode_dict = {
"min": (torch_inf, "min"),
"max": (-torch_inf, "max"),
"auto": (-torch_inf, "max")
if monitor is not None and ("acc" in monitor or monitor.startswith("fmeasure"))
else (torch_inf, "min"),
}
if mode not in mode_dict:
rank_zero_warn(
f"ModelCheckpoint mode {mode} is unknown, " f"fallback to auto mode.",
RuntimeWarning,
)
mode = "auto"
self.kth_value, self.mode = mode_dict[mode]
def scale_batch_size(trainer,
model: LightningModule,
mode: str = 'power',
steps_per_trial: int = 3,
init_val: int = 2,
max_trials: int = 25,
batch_arg_name: str = 'batch_size',
**fit_kwargs):
r"""
Will iteratively try to find the largest batch size for a given model
that does not give an out of memory (OOM) error.
Args:
trainer: The Trainer
model: Model to fit.
mode: string setting the search mode. Either `power` or `binsearch`.
If mode is `power` we keep multiplying the batch size by 2, until
we get an OOM error. If mode is 'binsearch', we will initially
also keep multiplying by 2 and after encountering an OOM error
do a binary search between the last successful batch size and the
batch size that failed.
steps_per_trial: number of steps to run with a given batch size.
Idealy 1 should be enough to test if a OOM error occurs,
however in practise a few are needed
init_val: initial batch size to start the search with
max_trials: max number of increase in batch size done before
algorithm is terminated
batch_arg_name: name of the attribute that stores the batch size.
It is expected that the user has provided a model or datamodule that has a hyperparameter
with that name. We will look for this attribute name in the following places
- `model`
- `model.hparams`
- `model.datamodule`
- `trainer.datamodule` (the datamodule passed to the tune method)
**fit_kwargs: remaining arguments to be passed to .fit(), e.g., dataloader
or datamodule.
"""
if trainer.fast_dev_run:
rank_zero_warn('Skipping batch size scaler since `fast_dev_run=True`',
UserWarning)
return
if not lightning_hasattr(model, batch_arg_name):
raise MisconfigurationException(
f'Field {batch_arg_name} not found in both `model` and `model.hparams`'
)
if hasattr(model, batch_arg_name) and hasattr(
model, "hparams") and batch_arg_name in model.hparams:
rank_zero_warn(
f'Field `model.{batch_arg_name}` and `model.hparams.{batch_arg_name}` are mutually exclusive!'
f' `model.{batch_arg_name}` will be used as the initial batch size for scaling.'
f' If this is not the intended behavior, please remove either one.'
)
if hasattr(model.train_dataloader, 'patch_loader_code'):
raise MisconfigurationException(
'The batch scaling feature cannot be used with dataloaders'
' passed directly to `.fit()`. Please disable the feature or'
' incorporate the dataloader into the model.')
# Arguments we adjust during the batch size finder, save for restoring
__scale_batch_dump_params(trainer)
# Set to values that are required by the algorithm
__scale_batch_reset_params(trainer, model, steps_per_trial)
# Save initial model, that is loaded after batch size is found
save_path = os.path.join(trainer.default_root_dir,
'scale_batch_size_temp_model.ckpt')
trainer.save_checkpoint(str(save_path))
if trainer.progress_bar_callback:
trainer.progress_bar_callback.disable()
# Initially we just double in size until an OOM is encountered
new_size = _adjust_batch_size(trainer, batch_arg_name,
value=init_val) # initially set to init_val
if mode == 'power':
new_size = _run_power_scaling(trainer, model, new_size, batch_arg_name,
max_trials, **fit_kwargs)
elif mode == 'binsearch':
new_size = _run_binsearch_scaling(trainer, model, new_size,
batch_arg_name, max_trials,
**fit_kwargs)
else:
raise ValueError(
'mode in method `scale_batch_size` can only be `power` or `binsearch'
)
garbage_collection_cuda()
log.info(
f'Finished batch size finder, will continue with full run using batch size {new_size}'
)
# Restore initial state of model
if trainer.is_global_zero:
trainer.checkpoint_connector.restore(str(save_path),
on_gpu=trainer.on_gpu)
fs = get_filesystem(str(save_path))
if fs.exists(save_path):
fs.rm(save_path)
# Finish by resetting variables so trainer is ready to fit model
__scale_batch_restore_params(trainer)
if trainer.progress_bar_callback:
trainer.progress_bar_callback.enable()
return new_size
def _export_data_to_json(export_path: str, raw_data: List[Dict]) -> Dict:
fs = get_filesystem(export_path)
if fs.exists(export_path):
fs.delete(export_path)
with fs.open(export_path, mode="w") as f:
json.dump(raw_data, f)
def __init__(self,
filepath: Optional[str] = None,
monitor: str = 'val_loss',
verbose: bool = False,
save_last: bool = False,
save_top_k: int = 1,
save_weights_only: bool = False,
mode: str = 'auto',
period: int = 1,
prefix: str = ''):
super().__init__()
if filepath:
self._fs = get_filesystem(filepath)
else:
self._fs = get_filesystem("") # will give local fileystem
if save_top_k > 0 and filepath is not None and self._fs.isdir(
filepath) and len(self._fs.ls(filepath)) > 0:
rank_zero_warn(
f"Checkpoint directory {filepath} exists and is not empty with save_top_k != 0."
"All files in this directory will be deleted when a checkpoint is saved!"
)
self._rank = 0
self.monitor = monitor
self.verbose = verbose
if filepath is None: # will be determined by trainer at runtime
self.dirpath, self.filename = None, None
else:
if self._fs.isdir(filepath):
self.dirpath, self.filename = filepath, "{epoch}"
else:
if self._fs.protocol == "file": # dont normalize remote paths
filepath = os.path.realpath(filepath)
self.dirpath, self.filename = os.path.split(filepath)
self._fs.makedirs(self.dirpath, exist_ok=True)
self.save_last = save_last
self.save_top_k = save_top_k
self.save_weights_only = save_weights_only
self.period = period
self.epoch_last_check = None
self.prefix = prefix
self.best_k_models = {}
# {filename: monitor}
self.kth_best_model_path = ''
self.best_model_score = 0
self.best_model_path = ''
self.save_function = None
self.warned_result_obj = False
torch_inf = torch.tensor(np.Inf)
mode_dict = {
'min': (torch_inf, 'min'),
'max': (-torch_inf, 'max'),
'auto': (-torch_inf, 'max') if 'acc' in self.monitor
or self.monitor.startswith('fmeasure') else (torch_inf, 'min'),
}
if mode not in mode_dict:
rank_zero_warn(
f'ModelCheckpoint mode {mode} is unknown, '
f'fallback to auto mode.', RuntimeWarning)
mode = 'auto'
self.kth_value, self.mode = mode_dict[mode]
def lr_find(
trainer: 'pl.Trainer',
model: 'pl.LightningModule',
min_lr: float = 1e-8,
max_lr: float = 1,
num_training: int = 100,
mode: str = 'exponential',
early_stop_threshold: float = 4.0,
update_attr: bool = False,
) -> Optional[_LRFinder]:
"""See :meth:`~pytorch_lightning.tuner.tuning.Tuner.lr_find`"""
if trainer.fast_dev_run:
rank_zero_warn(
'Skipping learning rate finder since fast_dev_run is enabled.',
UserWarning)
return
# Determine lr attr
if update_attr:
lr_attr_name = _determine_lr_attr_name(trainer, model)
save_path = os.path.join(trainer.default_root_dir,
'lr_find_temp_model.ckpt')
__lr_finder_dump_params(trainer, model)
# Prevent going into infinite loop
trainer.auto_lr_find = False
# Initialize lr finder object (stores results)
lr_finder = _LRFinder(mode, min_lr, max_lr, num_training)
# Use special lr logger callback
trainer.callbacks = [
_LRCallback(num_training,
early_stop_threshold,
progress_bar_refresh_rate=1)
]
# No logging
trainer.logger = DummyLogger()
# Max step set to number of iterations
trainer.max_steps = num_training
# Disable standard progress bar for fit
if trainer.progress_bar_callback:
trainer.progress_bar_callback.disable()
# Required for saving the model
trainer.optimizers, trainer.schedulers = [], [],
trainer.model = model
# Dump model checkpoint
trainer.save_checkpoint(str(save_path))
# Configure optimizer and scheduler
model.configure_optimizers = lr_finder._exchange_scheduler(
model.configure_optimizers)
# Fit, lr & loss logged in callback
trainer.tuner._run(model)
# Prompt if we stopped early
if trainer.global_step != num_training:
log.info(
f'LR finder stopped early after {trainer.global_step} steps due to diverging loss.'
)
# Transfer results from callback to lr finder object
lr_finder.results.update({
'lr': trainer.callbacks[0].lrs,
'loss': trainer.callbacks[0].losses
})
lr_finder._total_batch_idx = trainer.total_batch_idx # for debug purpose
# Reset model state
if trainer.is_global_zero:
trainer.checkpoint_connector.restore(
str(save_path), on_gpu=trainer._device_type == DeviceType.GPU)
fs = get_filesystem(str(save_path))
if fs.exists(save_path):
fs.rm(save_path)
# Finish by resetting variables so trainer is ready to fit model
__lr_finder_restore_params(trainer, model)
if trainer.progress_bar_callback:
trainer.progress_bar_callback.enable()
# Update lr attr if required
if update_attr:
lr = lr_finder.suggestion()
# TODO: log lr.results to self.logger
lightning_setattr(model, lr_attr_name, lr)
log.info(f'Learning rate set to {lr}')
return lr_finder