def change_encrypt_method(self):
""" Change encrypt method based on combobox. """
#self.lbox_encrypt = urwid.ListBox()
self.encryption_info = {}
wid, ID = self.encryption_combo.get_focus()
methods = self.encrypt_types
# pylint: disable-msg=E0203
if self._w.body.body.__contains__(self.pile_encrypt):
self._w.body.body.pop(self._w.body.body.__len__() - 1)
# If nothing is selected, select the first entry.
if ID == -1:
self.encryption_combo.set_focus(0)
ID = 0
theList = []
for type_ in ['required', 'optional']:
fields = methods[ID][type_]
for field in fields:
try:
text = language[field[1].lower().replace(' ', '_')]
except KeyError:
text = field[1].replace(' ', '_')
edit = MaskingEdit(('editcp', text + ': '))
edit.set_mask_mode('no_focus')
theList.append(edit)
# Add the data to any array, so that the information
# can be easily accessed by giving the name of the wanted
# data.
self.encryption_info[field[0]] = [edit, type_]
if self.wired:
edit.set_edit_text(noneToBlankString(
wired.GetWiredProperty(field[0])))
else:
edit.set_edit_text(noneToBlankString(
wireless.GetWirelessProperty(self.networkid, field[0])))
#FIXME: This causes the entire pile to light up upon use.
# Make this into a listbox?
self.pile_encrypt = DynWrap(
urwid.Pile(theList),
attrs=('editbx', 'editnfc')
)
self.pile_encrypt.set_sensitive(self.encryption_chkbox.get_state())
self._w.body.body.insert(self._w.body.body.__len__(), self.pile_encrypt)
def change_encrypt_method(self):
#self.lbox_encrypt = urwid.ListBox()
self.encryption_info = {}
wid,ID = self.encryption_combo.get_focus()
methods = misc.LoadEncryptionMethods()
if self._w.body.body.__contains__(self.pile_encrypt):
self._w.body.body.pop(self._w.body.body.__len__()-1)
# If nothing is selected, select the first entry.
if ID == -1:
self.encryption_combo.set_focus(0)
ID = 0
theList = []
for type_ in ['required', 'optional']:
fields = methods[ID][type_]
for field in fields:
if language.has_key(field[1]):
edit = MaskingEdit(('editcp',language[field[1].lower().replace(' ','_')]+': '))
else:
edit = MaskingEdit(('editcp',field[1].replace('_',' ')+': '))
edit.set_mask_mode('no_focus')
theList.append(edit)
# Add the data to any array, so that the information
# can be easily accessed by giving the name of the wanted
# data.
self.encryption_info[field[0]] = [edit, type_]
edit.set_edit_text(noneToBlankString(
wireless.GetWirelessProperty(self.networkid, field[0])))
#FIXME: This causes the entire pile to light up upon use.
# Make this into a listbox?
self.pile_encrypt = DynWrap(urwid.Pile(theList),attrs=('editbx','editnfc'))
self._w.body.body.insert(self._w.body.body.__len__(),self.pile_encrypt)
def __init__(self):
self.ui = None
self.body = None
self.wired = None
self.networkid = None
self.encryption_info = None
self.encryption_combo = None
self.encrypt_types = None
self.encryption_chkbox = None
static_ip_t = _('Use Static IPs')
ip_t = ('editcp', _('IP') + ': ')
netmask_t = ('editcp', _('Netmask') + ':')
gateway_t = ('editcp', _('Gateway') + ':')
use_static_dns_t = _('Use Static DNS')
use_global_dns_t = _('Use global DNS servers')
dns_dom_t = ('editcp', _('DNS domain') + ': ')
search_dom_t = ('editcp', _('Search domain') + ':')
dns1_t = ('editcp', _('DNS server') + ' 1' + ':' + ' ' * 8)
dns2_t = ('editcp', _('DNS server') + ' 2' + ':' + ' ' * 8)
dns3_t = ('editcp', _('DNS server') + ' 3' + ':' + ' ' * 8)
use_dhcp_h_t = _('Use DHCP Hostname')
dhcp_h_t = ('editcp', _('DHCP Hostname') + ': ')
cancel_t = _('Cancel')
ok_t = _('OK')
self.static_ip_cb = urwid.CheckBox(static_ip_t,
on_state_change=self.static_ip_toggle)
self.ip_edit = DynWrap(urwid.Edit(ip_t), False)
self.netmask_edit = DynWrap(urwid.Edit(netmask_t), False)
self.gateway_edit = DynWrap(urwid.Edit(gateway_t), False)
self.static_dns_cb = DynWrap(
urwid.CheckBox(use_static_dns_t, on_state_change=self.dns_toggle),
True,
('body', 'editnfc'),
None
)
self.global_dns_cb = DynWrap(
urwid.CheckBox(use_global_dns_t, on_state_change=self.dns_toggle),
False,
('body', 'editnfc'),
None
)
self.checkb_cols = urwid.Columns([
self.static_dns_cb,
self.global_dns_cb
])
self.dns_dom_edit = DynWrap(urwid.Edit(dns_dom_t), False)
self.search_dom_edit = DynWrap(urwid.Edit(search_dom_t), False)
self.dns1 = DynWrap(urwid.Edit(dns1_t), False)
self.dns2 = DynWrap(urwid.Edit(dns2_t), False)
self.dns3 = DynWrap(urwid.Edit(dns3_t), False)
self.use_dhcp_h = urwid.CheckBox(
use_dhcp_h_t,
False,
on_state_change=self.use_dhcp_h_toggle
)
self.dhcp_h = DynWrap(urwid.Edit(dhcp_h_t), False)
_blank = urwid.Text('')
walker = urwid.SimpleListWalker([
self.static_ip_cb,
self.ip_edit,
self.netmask_edit,
self.gateway_edit,
_blank,
self.checkb_cols,
self.dns_dom_edit,
self.search_dom_edit,
self.dns1, self.dns2, self.dns3,
_blank,
self.use_dhcp_h,
self.dhcp_h,
_blank
])
self._listbox = urwid.ListBox(walker)
self._frame = urwid.Frame(self._listbox)
# pylint: disable-msg=E1101
self.__super.__init__(self._frame)
class AdvancedSettingsDialog(urwid.WidgetWrap):
"""
Settings dialog.
Both the wired and the wireless settings preferences dialogs use some of the
same fields.
This will be used to produce the individual network settings dialogs way far
below.
"""
# pylint: disable-msg=W0231
def __init__(self):
self.ui = None
self.body = None
self.wired = None
self.networkid = None
self.encryption_info = None
self.encryption_combo = None
self.encrypt_types = None
self.encryption_chkbox = None
static_ip_t = _('Use Static IPs')
ip_t = ('editcp', _('IP') + ': ')
netmask_t = ('editcp', _('Netmask') + ':')
gateway_t = ('editcp', _('Gateway') + ':')
use_static_dns_t = _('Use Static DNS')
use_global_dns_t = _('Use global DNS servers')
dns_dom_t = ('editcp', _('DNS domain') + ': ')
search_dom_t = ('editcp', _('Search domain') + ':')
dns1_t = ('editcp', _('DNS server') + ' 1' + ':' + ' ' * 8)
dns2_t = ('editcp', _('DNS server') + ' 2' + ':' + ' ' * 8)
dns3_t = ('editcp', _('DNS server') + ' 3' + ':' + ' ' * 8)
use_dhcp_h_t = _('Use DHCP Hostname')
dhcp_h_t = ('editcp', _('DHCP Hostname') + ': ')
cancel_t = _('Cancel')
ok_t = _('OK')
self.static_ip_cb = urwid.CheckBox(static_ip_t,
on_state_change=self.static_ip_toggle)
self.ip_edit = DynWrap(urwid.Edit(ip_t), False)
self.netmask_edit = DynWrap(urwid.Edit(netmask_t), False)
self.gateway_edit = DynWrap(urwid.Edit(gateway_t), False)
self.static_dns_cb = DynWrap(
urwid.CheckBox(use_static_dns_t, on_state_change=self.dns_toggle),
True,
('body', 'editnfc'),
None
)
self.global_dns_cb = DynWrap(
urwid.CheckBox(use_global_dns_t, on_state_change=self.dns_toggle),
False,
('body', 'editnfc'),
None
)
self.checkb_cols = urwid.Columns([
self.static_dns_cb,
self.global_dns_cb
])
self.dns_dom_edit = DynWrap(urwid.Edit(dns_dom_t), False)
self.search_dom_edit = DynWrap(urwid.Edit(search_dom_t), False)
self.dns1 = DynWrap(urwid.Edit(dns1_t), False)
self.dns2 = DynWrap(urwid.Edit(dns2_t), False)
self.dns3 = DynWrap(urwid.Edit(dns3_t), False)
self.use_dhcp_h = urwid.CheckBox(
use_dhcp_h_t,
False,
on_state_change=self.use_dhcp_h_toggle
)
self.dhcp_h = DynWrap(urwid.Edit(dhcp_h_t), False)
_blank = urwid.Text('')
walker = urwid.SimpleListWalker([
self.static_ip_cb,
self.ip_edit,
self.netmask_edit,
self.gateway_edit,
_blank,
self.checkb_cols,
self.dns_dom_edit,
self.search_dom_edit,
self.dns1, self.dns2, self.dns3,
_blank,
self.use_dhcp_h,
self.dhcp_h,
_blank
])
self._listbox = urwid.ListBox(walker)
self._frame = urwid.Frame(self._listbox)
# pylint: disable-msg=E1101
self.__super.__init__(self._frame)
def use_dhcp_h_toggle(self, checkb, new_state, user_data=None):
""" Set sensitivity of widget. """
self.dhcp_h.set_sensitive(new_state)
def static_ip_toggle(self, checkb, new_state, user_data=None):
""" Set sensitivity of widget. """
for w in [self.ip_edit, self.netmask_edit, self.gateway_edit]:
w.set_sensitive(new_state)
self.static_dns_cb.set_state(new_state)
self.static_dns_cb.set_sensitive(not new_state)
if new_state:
self.checkb_cols.set_focus(self.global_dns_cb)
else:
self.checkb_cols.set_focus(self.static_dns_cb)
def dns_toggle(self, checkb, new_state, user_data=None):
""" Set sensitivity of widget. """
if checkb == self.static_dns_cb.get_w():
for w in [
self.dns_dom_edit,
self.search_dom_edit,
self.dns1,
self.dns2,
self.dns3
]:
w.set_sensitive(new_state)
if not new_state:
self.global_dns_cb.set_state(False, do_callback=False)
self.global_dns_cb.set_sensitive(new_state)
# use_global_dns_cb is DynWrapped
if checkb == self.global_dns_cb.get_w():
for w in [self.dns_dom_edit, self.search_dom_edit,
self.dns1, self.dns2, self.dns3 ]:
w.set_sensitive(not new_state)
def set_net_prop(self, option, value):
""" Set network property. MUST BE OVERRIDEN. """
raise NotImplementedError
# Code totally yanked from netentry.py
def save_settings(self):
""" Save settings common to wired and wireless settings dialogs. """
if self.static_ip_cb.get_state():
for i in [
self.ip_edit,
self.netmask_edit,
self.gateway_edit
]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop("ip", noneToString(self.ip_edit.get_edit_text()))
self.set_net_prop("netmask",
noneToString(self.netmask_edit.get_edit_text()))
self.set_net_prop("gateway",
noneToString(self.gateway_edit.get_edit_text()))
else:
self.set_net_prop("ip", '')
self.set_net_prop("netmask", '')
self.set_net_prop("gateway", '')
if self.static_dns_cb.get_state() and \
not self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', False)
# Strip addressses before checking them in the daemon.
for i in [
self.dns1,
self.dns2,
self.dns3,
self.dns_dom_edit,
self.search_dom_edit
]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop('dns_domain',
noneToString(self.dns_dom_edit.get_edit_text()))
self.set_net_prop("search_domain",
noneToString(self.search_dom_edit.get_edit_text()))
self.set_net_prop("dns1", noneToString(self.dns1.get_edit_text()))
self.set_net_prop("dns2", noneToString(self.dns2.get_edit_text()))
self.set_net_prop("dns3", noneToString(self.dns3.get_edit_text()))
elif self.static_dns_cb.get_state() and \
self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', True)
else:
self.set_net_prop('use_static_dns', False)
self.set_net_prop('use_global_dns', False)
self.set_net_prop('dns_domain', '')
self.set_net_prop("search_domain", '')
self.set_net_prop("dns1", '')
self.set_net_prop("dns2", '')
self.set_net_prop("dns3", '')
self.set_net_prop('dhcphostname', self.dhcp_h.get_edit_text())
self.set_net_prop('usedhcphostname', self.use_dhcp_h.get_state())
# Prevent comboboxes from dying.
def ready_widgets(self, ui, body):
""" Build comboboxes. """
self.ui = ui
self.body = body
self.encryption_combo.build_combobox(body, ui, 14)
self.change_encrypt_method()
def combo_on_change(self, combobox, new_index, user_data=None):
""" Handle change of item in the combobox. """
self.change_encrypt_method()
# More or less ripped from netentry.py
def change_encrypt_method(self):
""" Change encrypt method based on combobox. """
#self.lbox_encrypt = urwid.ListBox()
self.encryption_info = {}
wid, ID = self.encryption_combo.get_focus()
methods = self.encrypt_types
# pylint: disable-msg=E0203
if self._w.body.body.__contains__(self.pile_encrypt):
self._w.body.body.pop(self._w.body.body.__len__() - 1)
# If nothing is selected, select the first entry.
if ID == -1:
self.encryption_combo.set_focus(0)
ID = 0
theList = []
for type_ in ['required', 'optional']:
fields = methods[ID][type_]
for field in fields:
try:
text = language[field[1].lower().replace(' ', '_')]
except KeyError:
text = field[1].replace(' ', '_')
edit = MaskingEdit(('editcp', text + ': '))
edit.set_mask_mode('no_focus')
theList.append(edit)
# Add the data to any array, so that the information
# can be easily accessed by giving the name of the wanted
# data.
self.encryption_info[field[0]] = [edit, type_]
if self.wired:
edit.set_edit_text(noneToBlankString(
wired.GetWiredProperty(field[0])))
else:
edit.set_edit_text(noneToBlankString(
wireless.GetWirelessProperty(self.networkid, field[0])))
#FIXME: This causes the entire pile to light up upon use.
# Make this into a listbox?
self.pile_encrypt = DynWrap(
urwid.Pile(theList),
attrs=('editbx', 'editnfc')
)
self.pile_encrypt.set_sensitive(self.encryption_chkbox.get_state())
self._w.body.body.insert(self._w.body.body.__len__(), self.pile_encrypt)
#self._w.body.body.append(self.pile_encrypt)
def encryption_toggle(self, chkbox, new_state, user_data=None):
""" Set sensitivity of widget. """
self.encryption_combo.set_sensitive(new_state)
self.pile_encrypt.set_sensitive(new_state)
def __init__(self, body, pos, ui, dbus=None):
global daemon, wireless, wired
self.thebackends = None
self.backends = None
self.wpadrivers = None
self.thedrivers = None
daemon = dbus['daemon']
wireless = dbus['wireless']
wired = dbus['wired']
width, height = ui.get_cols_rows()
height -= 3
#width = 80
#height = 20
# Stuff that goes at the top
header0_t = _('General Settings')
header1_t = _('External Programs')
header2_t = _('Advanced Settings')
self.header0 = urwid.AttrWrap(SelText(header0_t), 'tab active',
'focus')
self.header1 = urwid.AttrWrap(SelText(header1_t), 'body', 'focus')
self.header2 = urwid.AttrWrap(SelText(header2_t), 'body', 'focus')
title = ('Preferences')
# Blank line
_blank = urwid.Text('')
####
#### Text in the widgets
####
# General Settings
net_cat_t = ('header', ('Network Interfaces'))
wired_t = ('editcp', ('Wired Interface') + ': ')
wless_t = ('editcp', ('Wireless Interface') + ':')
always_show_wired_t = _('Always show wired interface')
prefer_wired_t = _('Always switch to wired connection when available')
global_dns_cat_t = ('header', _('Global DNS servers'))
global_dns_t = ('editcp', _('Use global DNS servers'))
dns_dom_t = ('editcp', ' ' + _('DNS domain') + ': ')
search_dom_t = ('editcp', ' ' + _('Search domain') + ':')
dns1_t = ('editcp', ' ' + _('DNS server') + ' 1: ')
dns2_t = ('editcp', ' ' + _('DNS server') + ' 2: ')
dns3_t = ('editcp', ' ' + _('DNS server') + ' 3: ')
wired_auto_cat_t = ('header', _('Wired Autoconnect Settings'))
wired_auto_1_t = _('Use default profile on wired autoconnect')
wired_auto_2_t = _('Prompt for profile on wired autoconnect')
wired_auto_3_t = _('Use last used profile on wired autoconnect')
auto_reconn_cat_t = ('header', _('Automatic Reconnection'))
auto_reconn_t = _('Automatically reconnect on connection loss')
#### External Programs
automatic_t = _('Automatic (recommended)')
dhcp_header_t = ('header', _('DHCP Client'))
# Automatic
dhcp1_t = 'dhclient'
dhcp2_t = 'dhcpcd'
dhcp3_t = 'pump'
dhcp4_t = 'udhcpc'
wired_detect_header_t = ('header', _('Wired Link Detection'))
wired1_t = 'ethtool'
wired2_t = 'mii-tool'
flush_header_t = ('header', _('Route Table Flushing'))
flush1_t = 'ip'
flush2_t = 'route'
#### Advanced Settings
wpa_cat_t = ('header', _('WPA Supplicant'))
wpa_t = ('editcp', 'Driver:')
wpa_list = []
wpa_warn_t = (
'important',
_('You should almost always use wext as the WPA supplicant driver')
)
backend_cat_t = ('header', _('Backend'))
backend_t = _('Backend') + ':'
backend_list = []
debug_cat_t = ('header', _('Debugging'))
debug_mode_t = _('Enable debug mode')
wless_cat_t = ('header', _('Wireless Interface'))
use_dbm_t = _('Use dBm to measure signal strength')
verify_ap_t = \
_('Ping static gateways after connecting to verify association')
####
#### UI Widgets
####
# General Settings
self.net_cat = urwid.Text(net_cat_t)
self.wired_edit = \
urwid.AttrWrap(urwid.Edit(wired_t), 'editbx', 'editfc')
self.wless_edit = \
urwid.AttrWrap(urwid.Edit(wless_t), 'editbx', 'editfc')
self.prefer_wired_chkbx = urwid.CheckBox(prefer_wired_t)
self.global_dns_cat = urwid.Text(global_dns_cat_t)
# Default the global DNS settings to off. They will be reenabled later
# if so required.
global_dns_state = False
self.global_dns_checkb = urwid.CheckBox(
global_dns_t,
global_dns_state,
on_state_change=self.global_dns_trigger)
self.search_dom = DynWrap(urwid.Edit(search_dom_t), global_dns_state)
self.dns_dom = DynWrap(urwid.Edit(dns_dom_t), global_dns_state)
self.dns1 = DynWrap(urwid.Edit(dns1_t), global_dns_state)
self.dns2 = DynWrap(urwid.Edit(dns2_t), global_dns_state)
self.dns3 = DynWrap(urwid.Edit(dns3_t), global_dns_state)
self.always_show_wired_checkb = urwid.CheckBox(always_show_wired_t)
self.wired_auto_l = []
self.wired_auto_cat = urwid.Text(wired_auto_cat_t)
self.wired_auto_1 = urwid.RadioButton(self.wired_auto_l,
wired_auto_1_t)
self.wired_auto_2 = urwid.RadioButton(self.wired_auto_l,
wired_auto_2_t)
self.wired_auto_3 = urwid.RadioButton(self.wired_auto_l,
wired_auto_3_t)
self.auto_reconn_cat = urwid.Text(auto_reconn_cat_t)
self.auto_reconn_checkb = urwid.CheckBox(auto_reconn_t)
generalLB = urwid.ListBox([
self.net_cat,
self.wless_edit, # _blank,
self.wired_edit,
self.always_show_wired_checkb,
self.prefer_wired_chkbx,
_blank,
self.global_dns_cat,
self.global_dns_checkb, # _blank,
self.search_dom,
self.dns_dom,
self.dns1,
self.dns2,
self.dns3,
_blank,
self.wired_auto_cat,
self.wired_auto_1,
self.wired_auto_2,
self.wired_auto_3,
_blank,
self.auto_reconn_cat,
self.auto_reconn_checkb
])
#### External Programs tab
automatic_t = _('Automatic (recommended)')
self.dhcp_header = urwid.Text(dhcp_header_t)
self.dhcp_l = []
# Order of these is flipped in the actual interface,
# (2, 3, 1 -> dhcpcd, pump, dhclient), because dhclient often doesn't
# like to work on several distros.
self.dhcp0 = urwid.RadioButton(self.dhcp_l, automatic_t)
self.dhcp1 = DynRadioButton(self.dhcp_l, dhcp1_t)
self.dhcp2 = DynRadioButton(self.dhcp_l, dhcp2_t)
self.dhcp3 = DynRadioButton(self.dhcp_l, dhcp3_t)
self.dhcp4 = DynRadioButton(self.dhcp_l, dhcp4_t)
self.dhcp_l = [
self.dhcp0, self.dhcp1, self.dhcp2, self.dhcp3, self.dhcp4
]
self.wired_l = []
self.wired_detect_header = urwid.Text(wired_detect_header_t)
self.wired0 = urwid.RadioButton(self.wired_l, automatic_t)
self.wired1 = DynRadioButton(self.wired_l, wired1_t)
self.wired2 = DynRadioButton(self.wired_l, wired2_t)
self.wired_l = [self.wired0, self.wired1, self.wired2]
self.flush_l = []
self.flush_header = urwid.Text(flush_header_t)
self.flush0 = urwid.RadioButton(self.flush_l, automatic_t)
self.flush1 = DynRadioButton(self.flush_l, flush1_t)
self.flush2 = DynRadioButton(self.flush_l, flush2_t)
self.flush_l = [self.flush0, self.flush1, self.flush2]
externalLB = urwid.ListBox([
self.dhcp_header, self.dhcp0, self.dhcp2, self.dhcp3, self.dhcp1,
self.dhcp4, _blank, self.wired_detect_header, self.wired0,
self.wired1, self.wired2, _blank, self.flush_header, self.flush0,
self.flush1, self.flush2
])
#### Advanced settings
self.wpa_cat = urwid.Text(wpa_cat_t)
self.wpa_cbox = ComboBox(wpa_t)
self.wpa_warn = urwid.Text(wpa_warn_t)
self.backend_cat = urwid.Text(backend_cat_t)
self.backend_cbox = ComboBox(backend_t)
self.debug_cat = urwid.Text(debug_cat_t)
self.debug_mode_checkb = urwid.CheckBox(debug_mode_t)
self.wless_cat = urwid.Text(wless_cat_t)
self.use_dbm_checkb = urwid.CheckBox(use_dbm_t)
self.verify_ap_checkb = urwid.CheckBox(verify_ap_t)
advancedLB = urwid.ListBox([
self.wpa_cat, self.wpa_cbox, self.wpa_warn, _blank,
self.backend_cat, self.backend_cbox, _blank, self.debug_cat,
self.debug_mode_checkb, _blank, self.wless_cat,
self.use_dbm_checkb, _blank, self.verify_ap_checkb, _blank
])
headerList = [self.header0, self.header1, self.header2]
lbList = [generalLB, externalLB, advancedLB]
self.tab_map = {
self.header0: generalLB,
self.header1: externalLB,
self.header2: advancedLB
}
#self.load_settings()
self.tabs = TabColumns(headerList, lbList, _('Preferences'))
# pylint: disable-msg=E1101
self.__super.__init__(self.tabs)
def __init__(self, body, pos, ui, dbus=None):
global daemon, wireless, wired
daemon = dbus['daemon']
wireless = dbus['wireless']
wired = dbus['wired']
width,height = ui.get_cols_rows()
height -= 3
#width = 80
#height = 20
# Stuff that goes at the top
header0_t = language["gen_settings"]
header1_t = language["ext_programs"]
header2_t = language["advanced_settings"]
self.header0 = urwid.AttrWrap(SelText(header0_t), 'tab active', 'focus')
self.header1 = urwid.AttrWrap(SelText(header1_t), 'body', 'focus')
self.header2 = urwid.AttrWrap(SelText(header2_t), 'body', 'focus')
title = language['preferences']
# Blank line
_blank = urwid.Text('')
####
#### Text in the widgets
####
# General Settings
net_cat_t = ('header', language['network_interfaces'])
wired_t = ('editcp', language['wired_interface']+': ')
wless_t = ('editcp', language['wireless_interface']+':')
always_show_wired_t = language['wired_always_on']
prefer_wired_t = language['always_switch_to_wired']
global_dns_cat_t = ('header', language['global_dns_servers'])
global_dns_t = ('editcp', language['use_global_dns'])
dns_dom_t = ('editcp', ' '+language['dns_domain']+': ')
search_dom_t = ('editcp', ' '+language['search_domain']+':')
dns1_t = ('editcp', ' DNS server 1: ')
dns2_t = ('editcp', ' DNS server 2: ')
dns3_t = ('editcp', ' DNS server 3: ')
wired_auto_cat_t= ('header', language['wired_autoconnect_settings'])
wired_auto_1_t = language['use_default_profile']
wired_auto_2_t = language['show_wired_list']
wired_auto_3_t = language['use_last_used_profile']
auto_reconn_cat_t = ('header', language['automatic_reconnection'])
auto_reconn_t = language['auto_reconnect']
#### External Programs
automatic_t = language['wicd_auto_config']
dhcp_header_t = ('header', language["dhcp_client"])
# Automatic
dhcp1_t = 'dhclient'
dhcp2_t = 'dhcpcd'
dhcp3_t = 'pump'
dhcp4_t = 'udhcpc'
wired_detect_header_t = ('header', language["wired_detect"])
wired1_t = 'ethtool'
wired2_t = 'mii-tool'
flush_header_t = ('header', language["route_flush"])
flush1_t = 'ip'
flush2_t = 'route'
#### Advanced Settings
wpa_cat_t=('header', language['wpa_supplicant'])
wpa_t=('editcp','Driver:')
wpa_list = []
wpa_warn_t = ('important', language['always_use_wext'])
backend_cat_t = ('header', language['backend'])
backend_t = language['backend']+':'
backend_list = []
debug_cat_t = ('header', language['debugging'])
debug_mode_t = language['use_debug_mode']
wless_cat_t = ('header', language['wireless_interface'])
use_dbm_t = language['display_type_dialog']
verify_ap_t = language['verify_ap_dialog']
####
#### UI Widgets
####
# General Settings
self.net_cat = urwid.Text(net_cat_t)
self.wired_edit = urwid.AttrWrap(urwid.Edit(wired_t),'editbx','editfc')
self.wless_edit = urwid.AttrWrap(urwid.Edit(wless_t),'editbx','editfc')
self.prefer_wired_chkbx = urwid.CheckBox(prefer_wired_t)
self.global_dns_cat = urwid.Text(global_dns_cat_t)
# Default the global DNS settings to off. They will be reenabled later
# if so required.
global_dns_state = False
self.global_dns_checkb = urwid.CheckBox(global_dns_t, global_dns_state,
on_state_change=self.global_dns_trigger)
self.search_dom = DynWrap(urwid.Edit(search_dom_t), global_dns_state)
self.dns_dom = DynWrap(urwid.Edit(dns_dom_t), global_dns_state)
self.dns1 = DynWrap(urwid.Edit(dns1_t), global_dns_state)
self.dns2 = DynWrap(urwid.Edit(dns2_t), global_dns_state)
self.dns3 = DynWrap(urwid.Edit(dns3_t), global_dns_state)
self.always_show_wired_checkb = urwid.CheckBox(always_show_wired_t)
self.wired_auto_l = []
self.wired_auto_cat= urwid.Text(wired_auto_cat_t)
self.wired_auto_1 = urwid.RadioButton(self.wired_auto_l,wired_auto_1_t)
self.wired_auto_2 = urwid.RadioButton(self.wired_auto_l,wired_auto_2_t)
self.wired_auto_3 = urwid.RadioButton(self.wired_auto_l,wired_auto_3_t)
self.auto_reconn_cat = urwid.Text(auto_reconn_cat_t)
self.auto_reconn_checkb = urwid.CheckBox(auto_reconn_t)
generalLB = urwid.ListBox([self.net_cat,
self.wless_edit,#_blank,
self.wired_edit,
self.always_show_wired_checkb,
self.prefer_wired_chkbx,_blank,
self.global_dns_cat,
self.global_dns_checkb,#_blank,
self.search_dom,self.dns_dom,
self.dns1,self.dns2,self.dns3,_blank,
self.wired_auto_cat,
self.wired_auto_1,
self.wired_auto_2,
self.wired_auto_3, _blank,
self.auto_reconn_cat,
self.auto_reconn_checkb
])
#### External Programs tab
automatic_t = language['wicd_auto_config']
self.dhcp_header = urwid.Text(dhcp_header_t)
self.dhcp_l = []
# Order of these is flipped in the actual interface,
# (2,3,1 -> dhcpcd, pump, dhclient), because dhclient often doesn't like
# to work on several distros.
self.dhcp0 = urwid.RadioButton(self.dhcp_l ,automatic_t)
self.dhcp1 = DynRadioButton(self.dhcp_l, dhcp1_t)
self.dhcp2 = DynRadioButton(self.dhcp_l, dhcp2_t)
self.dhcp3 = DynRadioButton(self.dhcp_l, dhcp3_t)
self.dhcp4 = DynRadioButton(self.dhcp_l, dhcp4_t)
self.dhcp_l = [self.dhcp0,self.dhcp1,self.dhcp2,self.dhcp3,self.dhcp4]
self.wired_l = []
self.wired_detect_header = urwid.Text(wired_detect_header_t)
self.wired0 = urwid.RadioButton(self.wired_l, automatic_t)
self.wired1 = DynRadioButton(self.wired_l, wired1_t)
self.wired2 = DynRadioButton(self.wired_l, wired2_t)
self.wired_l = [self.wired0, self.wired1, self.wired2]
self.flush_l = []
self.flush_header = urwid.Text(flush_header_t)
self.flush0 = urwid.RadioButton(self.flush_l,automatic_t)
self.flush1 = DynRadioButton(self.flush_l,flush1_t)
self.flush2 = DynRadioButton(self.flush_l,flush2_t)
self.flush_l = [self.flush0,self.flush1,self.flush2]
externalLB = urwid.ListBox([self.dhcp_header,
self.dhcp0,self.dhcp2,self.dhcp3,self.dhcp1,
self.dhcp4,
_blank,
self.wired_detect_header,
self.wired0,self.wired1,self.wired2,
_blank,
self.flush_header,
self.flush0,self.flush1,self.flush2
])
#### Advanced settings
self.wpa_cat = urwid.Text(wpa_cat_t)
self.wpa_cbox = ComboBox(wpa_t)
self.wpa_warn = urwid.Text(wpa_warn_t)
self.backend_cat = urwid.Text(backend_cat_t)
self.backend_cbox = ComboBox(backend_t)
self.debug_cat = urwid.Text(debug_cat_t)
self.debug_mode_checkb = urwid.CheckBox(debug_mode_t)
self.wless_cat = urwid.Text(wless_cat_t)
self.use_dbm_checkb = urwid.CheckBox(use_dbm_t)
self.verify_ap_checkb = urwid.CheckBox(verify_ap_t)
advancedLB = urwid.ListBox([self.wpa_cat,
self.wpa_cbox,self.wpa_warn,_blank,
self.backend_cat,
self.backend_cbox,_blank,
self.debug_cat,
self.debug_mode_checkb, _blank,
self.wless_cat,
self.use_dbm_checkb, _blank,
self.verify_ap_checkb, _blank
])
headerList = [self.header0,self.header1,self.header2]
lbList = [generalLB,externalLB,advancedLB]
self.tab_map = {self.header0 : generalLB,
self.header1 : externalLB,
self.header2 : advancedLB}
#self.load_settings()
self.tabs = TabColumns(headerList,lbList,language['preferences'])
self.__super.__init__(self.tabs)
class PrefsDialog(urwid.WidgetWrap):
def __init__(self, body, pos, ui, dbus=None):
global daemon, wireless, wired
daemon = dbus['daemon']
wireless = dbus['wireless']
wired = dbus['wired']
width,height = ui.get_cols_rows()
height -= 3
#width = 80
#height = 20
# Stuff that goes at the top
header0_t = language["gen_settings"]
header1_t = language["ext_programs"]
header2_t = language["advanced_settings"]
self.header0 = urwid.AttrWrap(SelText(header0_t), 'tab active', 'focus')
self.header1 = urwid.AttrWrap(SelText(header1_t), 'body', 'focus')
self.header2 = urwid.AttrWrap(SelText(header2_t), 'body', 'focus')
title = language['preferences']
# Blank line
_blank = urwid.Text('')
####
#### Text in the widgets
####
# General Settings
net_cat_t = ('header', language['network_interfaces'])
wired_t = ('editcp', language['wired_interface']+': ')
wless_t = ('editcp', language['wireless_interface']+':')
always_show_wired_t = language['wired_always_on']
prefer_wired_t = language['always_switch_to_wired']
global_dns_cat_t = ('header', language['global_dns_servers'])
global_dns_t = ('editcp', language['use_global_dns'])
dns_dom_t = ('editcp', ' '+language['dns_domain']+': ')
search_dom_t = ('editcp', ' '+language['search_domain']+':')
dns1_t = ('editcp', ' DNS server 1: ')
dns2_t = ('editcp', ' DNS server 2: ')
dns3_t = ('editcp', ' DNS server 3: ')
wired_auto_cat_t= ('header', language['wired_autoconnect_settings'])
wired_auto_1_t = language['use_default_profile']
wired_auto_2_t = language['show_wired_list']
wired_auto_3_t = language['use_last_used_profile']
auto_reconn_cat_t = ('header', language['automatic_reconnection'])
auto_reconn_t = language['auto_reconnect']
#### External Programs
automatic_t = language['wicd_auto_config']
dhcp_header_t = ('header', language["dhcp_client"])
# Automatic
dhcp1_t = 'dhclient'
dhcp2_t = 'dhcpcd'
dhcp3_t = 'pump'
dhcp4_t = 'udhcpc'
wired_detect_header_t = ('header', language["wired_detect"])
wired1_t = 'ethtool'
wired2_t = 'mii-tool'
flush_header_t = ('header', language["route_flush"])
flush1_t = 'ip'
flush2_t = 'route'
#### Advanced Settings
wpa_cat_t=('header', language['wpa_supplicant'])
wpa_t=('editcp','Driver:')
wpa_list = []
wpa_warn_t = ('important', language['always_use_wext'])
backend_cat_t = ('header', language['backend'])
backend_t = language['backend']+':'
backend_list = []
debug_cat_t = ('header', language['debugging'])
debug_mode_t = language['use_debug_mode']
wless_cat_t = ('header', language['wireless_interface'])
use_dbm_t = language['display_type_dialog']
verify_ap_t = language['verify_ap_dialog']
####
#### UI Widgets
####
# General Settings
self.net_cat = urwid.Text(net_cat_t)
self.wired_edit = urwid.AttrWrap(urwid.Edit(wired_t),'editbx','editfc')
self.wless_edit = urwid.AttrWrap(urwid.Edit(wless_t),'editbx','editfc')
self.prefer_wired_chkbx = urwid.CheckBox(prefer_wired_t)
self.global_dns_cat = urwid.Text(global_dns_cat_t)
# Default the global DNS settings to off. They will be reenabled later
# if so required.
global_dns_state = False
self.global_dns_checkb = urwid.CheckBox(global_dns_t, global_dns_state,
on_state_change=self.global_dns_trigger)
self.search_dom = DynWrap(urwid.Edit(search_dom_t), global_dns_state)
self.dns_dom = DynWrap(urwid.Edit(dns_dom_t), global_dns_state)
self.dns1 = DynWrap(urwid.Edit(dns1_t), global_dns_state)
self.dns2 = DynWrap(urwid.Edit(dns2_t), global_dns_state)
self.dns3 = DynWrap(urwid.Edit(dns3_t), global_dns_state)
self.always_show_wired_checkb = urwid.CheckBox(always_show_wired_t)
self.wired_auto_l = []
self.wired_auto_cat= urwid.Text(wired_auto_cat_t)
self.wired_auto_1 = urwid.RadioButton(self.wired_auto_l,wired_auto_1_t)
self.wired_auto_2 = urwid.RadioButton(self.wired_auto_l,wired_auto_2_t)
self.wired_auto_3 = urwid.RadioButton(self.wired_auto_l,wired_auto_3_t)
self.auto_reconn_cat = urwid.Text(auto_reconn_cat_t)
self.auto_reconn_checkb = urwid.CheckBox(auto_reconn_t)
generalLB = urwid.ListBox([self.net_cat,
self.wless_edit,#_blank,
self.wired_edit,
self.always_show_wired_checkb,
self.prefer_wired_chkbx,_blank,
self.global_dns_cat,
self.global_dns_checkb,#_blank,
self.search_dom,self.dns_dom,
self.dns1,self.dns2,self.dns3,_blank,
self.wired_auto_cat,
self.wired_auto_1,
self.wired_auto_2,
self.wired_auto_3, _blank,
self.auto_reconn_cat,
self.auto_reconn_checkb
])
#### External Programs tab
automatic_t = language['wicd_auto_config']
self.dhcp_header = urwid.Text(dhcp_header_t)
self.dhcp_l = []
# Order of these is flipped in the actual interface,
# (2,3,1 -> dhcpcd, pump, dhclient), because dhclient often doesn't like
# to work on several distros.
self.dhcp0 = urwid.RadioButton(self.dhcp_l ,automatic_t)
self.dhcp1 = DynRadioButton(self.dhcp_l, dhcp1_t)
self.dhcp2 = DynRadioButton(self.dhcp_l, dhcp2_t)
self.dhcp3 = DynRadioButton(self.dhcp_l, dhcp3_t)
self.dhcp4 = DynRadioButton(self.dhcp_l, dhcp4_t)
self.dhcp_l = [self.dhcp0,self.dhcp1,self.dhcp2,self.dhcp3,self.dhcp4]
self.wired_l = []
self.wired_detect_header = urwid.Text(wired_detect_header_t)
self.wired0 = urwid.RadioButton(self.wired_l, automatic_t)
self.wired1 = DynRadioButton(self.wired_l, wired1_t)
self.wired2 = DynRadioButton(self.wired_l, wired2_t)
self.wired_l = [self.wired0, self.wired1, self.wired2]
self.flush_l = []
self.flush_header = urwid.Text(flush_header_t)
self.flush0 = urwid.RadioButton(self.flush_l,automatic_t)
self.flush1 = DynRadioButton(self.flush_l,flush1_t)
self.flush2 = DynRadioButton(self.flush_l,flush2_t)
self.flush_l = [self.flush0,self.flush1,self.flush2]
externalLB = urwid.ListBox([self.dhcp_header,
self.dhcp0,self.dhcp2,self.dhcp3,self.dhcp1,
self.dhcp4,
_blank,
self.wired_detect_header,
self.wired0,self.wired1,self.wired2,
_blank,
self.flush_header,
self.flush0,self.flush1,self.flush2
])
#### Advanced settings
self.wpa_cat = urwid.Text(wpa_cat_t)
self.wpa_cbox = ComboBox(wpa_t)
self.wpa_warn = urwid.Text(wpa_warn_t)
self.backend_cat = urwid.Text(backend_cat_t)
self.backend_cbox = ComboBox(backend_t)
self.debug_cat = urwid.Text(debug_cat_t)
self.debug_mode_checkb = urwid.CheckBox(debug_mode_t)
self.wless_cat = urwid.Text(wless_cat_t)
self.use_dbm_checkb = urwid.CheckBox(use_dbm_t)
self.verify_ap_checkb = urwid.CheckBox(verify_ap_t)
advancedLB = urwid.ListBox([self.wpa_cat,
self.wpa_cbox,self.wpa_warn,_blank,
self.backend_cat,
self.backend_cbox,_blank,
self.debug_cat,
self.debug_mode_checkb, _blank,
self.wless_cat,
self.use_dbm_checkb, _blank,
self.verify_ap_checkb, _blank
])
headerList = [self.header0,self.header1,self.header2]
lbList = [generalLB,externalLB,advancedLB]
self.tab_map = {self.header0 : generalLB,
self.header1 : externalLB,
self.header2 : advancedLB}
#self.load_settings()
self.tabs = TabColumns(headerList,lbList,language['preferences'])
self.__super.__init__(self.tabs)
def load_settings(self):
### General Settings
# ComboBox does not like dbus.Strings as text markups. My fault. :/
wless_iface = unicode(daemon.GetWirelessInterface())
wired_iface = unicode(daemon.GetWiredInterface())
self.wless_edit.set_edit_text(wless_iface)
self.wired_edit.set_edit_text(wired_iface)
self.always_show_wired_checkb.set_state(
daemon.GetAlwaysShowWiredInterface())
self.prefer_wired_chkbx.set_state(daemon.GetPreferWiredNetwork())
# DNS
self.global_dns_checkb.set_state(daemon.GetUseGlobalDNS())
theDNS = daemon.GetGlobalDNSAddresses()
i = 0
for w in self.dns1,self.dns2,self.dns3,self.dns_dom,self.search_dom :
w.set_edit_text(misc.noneToBlankString(theDNS[i]))
i+=1
# Wired Automatic Connection
self.wired_auto_l[daemon.GetWiredAutoConnectMethod()-1]
self.auto_reconn_checkb.set_state(daemon.GetAutoReconnect())
def find_avail(apps):
for app in apps[1:]:
app.set_sensitive(daemon.GetAppAvailable(app.get_label()))
### External Programs
find_avail(self.dhcp_l)
dhcp_method = daemon.GetDHCPClient()
self.dhcp_l[dhcp_method].set_state(True)
find_avail(self.wired_l)
wired_link_method = daemon.GetLinkDetectionTool()
self.wired_l[wired_link_method].set_state(True)
find_avail(self.flush_l)
flush_method = daemon.GetFlushTool()
self.flush_l[flush_method].set_state(True)
### Advanced settings
# wpa_supplicant janx
self.wpadrivers = wireless.GetWpaSupplicantDrivers()
self.wpadrivers.append("ralink_legacy")
# Same as above with the dbus.String
self.thedrivers = [unicode(w) for w in self.wpadrivers]
self.wpa_cbox.set_list(self.thedrivers)
# Pick where to begin first:
def_driver = daemon.GetWPADriver()
try:
self.wpa_cbox.set_focus(self.wpadrivers.index(def_driver))
except ValueError:
pass # It defaults to 0 anyway (I hope)
self.backends = daemon.GetBackendList()
self.thebackends= [unicode(w) for w in self.backends]
self.backend_cbox.set_list(self.thebackends)
cur_backend = daemon.GetSavedBackend()
try:
self.backend_cbox.set_focus(self.thebackends.index(cur_backend))
except ValueError:
self.backend_cbox.set_focus(0)
# Three last checkboxes
self.debug_mode_checkb.set_state(daemon.GetDebugMode())
self.use_dbm_checkb.set_state(daemon.GetSignalDisplayType())
self.verify_ap_checkb.set_state(daemon.GetShouldVerifyAp())
def save_settings(self):
""" Pushes the selected settings to the daemon.
This exact order is found in prefs.py"""
daemon.SetUseGlobalDNS(self.global_dns_checkb.get_state())
for i in [self.dns1, self.dns2,
self.dns3,self.dns_dom, self.search_dom, self.dns_dom]:
i.set_edit_text(i.get_edit_text().strip())
daemon.SetGlobalDNS(self.dns1.get_edit_text(), self.dns2.get_edit_text(),
self.dns3.get_edit_text(), self.dns_dom.get_edit_text(),
self.search_dom.get_edit_text())
daemon.SetWirelessInterface(self.wless_edit.get_edit_text())
daemon.SetWiredInterface(self.wired_edit.get_edit_text())
daemon.SetWPADriver(self.wpadrivers[self.wpa_cbox.get_focus()[1]])
daemon.SetAlwaysShowWiredInterface(self.always_show_wired_checkb.get_state())
daemon.SetAutoReconnect(self.auto_reconn_checkb.get_state())
daemon.SetDebugMode(self.debug_mode_checkb.get_state())
daemon.SetSignalDisplayType(int(self.use_dbm_checkb.get_state()))
daemon.SetShouldVerifyAp(int(self.verify_ap_checkb.get_state()))
daemon.SetPreferWiredNetwork(bool(self.prefer_wired_chkbx.get_state()))
if self.wired_auto_2.get_state():
daemon.SetWiredAutoConnectMethod(2)
elif self.wired_auto_3.get_state():
daemon.SetWiredAutoConnectMethod(3)
else:
daemon.SetWiredAutoConnectMethod(1)
daemon.SetBackend(self.backends[self.backend_cbox.get_focus()[1]])
# External Programs Tab
if self.dhcp0.get_state():
dhcp_client = misc.AUTO
elif self.dhcp1.get_state():
dhcp_client = misc.DHCLIENT
elif self.dhcp2.get_state():
dhcp_client = misc.DHCPCD
elif self.dhcp3.get_state():
dhcp_client = misc.PUMP
else:
dhcp_client = misc.UDHCPC
daemon.SetDHCPClient(dhcp_client)
if self.wired0.get_state():
link_tool = misc.AUTO
elif self.wired1.get_state():
link_tool = misc.ETHTOOL
else:
link_tool = misc.MIITOOL
daemon.SetLinkDetectionTool(link_tool)
if self.flush0.get_state():
flush_tool = misc.AUTO
elif self.flush1.get_state():
flush_tool = misc.IP
else:
flush_tool = misc.ROUTE
daemon.SetFlushTool(flush_tool)
# DNS CheckBox callback
def global_dns_trigger(self,check_box,new_state,user_data=None):
for w in self.dns1,self.dns2,self.dns3,self.dns_dom,self.search_dom:
w.set_sensitive(new_state)
def ready_widgets(self,ui,body):
self.wpa_cbox.build_combobox(body,ui,4)
self.backend_cbox.build_combobox(body,ui,8)
class AdvancedSettingsDialog(urwid.WidgetWrap):
def __init__(self):
self.ui=None
static_ip_t = _('Use Static IPs')
ip_t = ('editcp',_('IP')+': ')
netmask_t = ('editcp',_('Netmask')+':')
gateway_t = ('editcp',_('Gateway')+':')
use_static_dns_t = _('Use Static DNS')
use_global_dns_t = _('Use global DNS servers')
dns_dom_t = ('editcp',_('DNS domain')+': ')
search_dom_t = ('editcp',_('Search domain')+':')
dns1_t = ('editcp',_('DNS server')+ ' 1'+':'+' '*8)
dns2_t = ('editcp',_('DNS server')+ ' 2'+':'+' '*8)
dns3_t = ('editcp',_('DNS server')+ ' 3'+':'+' '*8)
use_dhcp_h_t = _('Use DHCP Hostname')
dhcp_h_t = ('editcp',_('DHCP Hostname')+': ')
cancel_t = _('Cancel')
ok_t = _('OK')
self.static_ip_cb = urwid.CheckBox(static_ip_t,
on_state_change=self.static_ip_toggle)
self.ip_edit = DynWrap(urwid.Edit(ip_t),False)
self.netmask_edit = DynWrap(urwid.Edit(netmask_t),False)
self.gateway_edit = DynWrap(urwid.Edit(gateway_t),False)
self.static_dns_cb = DynWrap(urwid.CheckBox(use_static_dns_t,
on_state_change=self.dns_toggle),True,('body','editnfc'),None)
self.global_dns_cb = DynWrap(urwid.CheckBox(use_global_dns_t,
on_state_change=self.dns_toggle),False,('body','editnfc'),None)
self.checkb_cols = urwid.Columns([self.static_dns_cb,
self.global_dns_cb])
self.dns_dom_edit = DynWrap(urwid.Edit(dns_dom_t) ,False)
self.search_dom_edit = DynWrap(urwid.Edit(search_dom_t),False)
self.dns1 = DynWrap(urwid.Edit(dns1_t) ,False)
self.dns2 = DynWrap(urwid.Edit(dns2_t) ,False)
self.dns3 = DynWrap(urwid.Edit(dns3_t) ,False)
self.use_dhcp_h = urwid.CheckBox(use_dhcp_h_t,False,on_state_change=self.use_dhcp_h_toggle)
self.dhcp_h = DynWrap(urwid.Edit(dhcp_h_t),False)
_blank = urwid.Text('')
walker = urwid.SimpleListWalker([self.static_ip_cb,
self.ip_edit,
self.netmask_edit,
self.gateway_edit,
_blank,
self.checkb_cols,
self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3,
_blank,
self.use_dhcp_h,
self.dhcp_h,
_blank
])
self._listbox = urwid.ListBox(walker)
self._frame = urwid.Frame(self._listbox)
self.__super.__init__(self._frame)
def use_dhcp_h_toggle(self,checkb,new_state,user_data=None):
self.dhcp_h.set_sensitive(new_state)
def static_ip_toggle(self,checkb,new_state,user_data=None):
for w in [ self.ip_edit,self.netmask_edit,self.gateway_edit ]:
w.set_sensitive(new_state)
self.static_dns_cb.set_state(new_state)
self.static_dns_cb.set_sensitive(not new_state)
if new_state:
self.checkb_cols.set_focus(self.global_dns_cb)
else:
self.checkb_cols.set_focus(self.static_dns_cb)
def dns_toggle(self,checkb,new_state,user_data=None):
if checkb == self.static_dns_cb.get_w():
for w in [ self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3 ]:
w.set_sensitive(new_state)
if not new_state:
self.global_dns_cb.set_state(False,do_callback=False)
self.global_dns_cb.set_sensitive(new_state)
# use_global_dns_cb is DynWrapped
if checkb == self.global_dns_cb.get_w():
for w in [self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3 ]:
w.set_sensitive(not new_state)
# Code totally yanked from netentry.py
def save_settings(self):
""" Save settings common to wired and wireless settings dialogs. """
if self.static_ip_cb.get_state():
for i in [self.ip_edit,self.netmask_edit,self.gateway_edit]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop("ip", noneToString(self.ip_edit.get_edit_text()))
self.set_net_prop("netmask", noneToString(self.netmask_edit.get_edit_text()))
self.set_net_prop("gateway", noneToString(self.gateway_edit.get_edit_text()))
else:
self.set_net_prop("ip", '')
self.set_net_prop("netmask", '')
self.set_net_prop("gateway", '')
if self.static_dns_cb.get_state() and \
not self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', False)
# Strip addressses before checking them in the daemon.
for i in [self.dns1, self.dns2,
self.dns3,self.dns_dom_edit, self.search_dom_edit]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop('dns_domain', noneToString(self.dns_dom_edit.get_edit_text()))
self.set_net_prop("search_domain", noneToString(self.search_dom_edit.get_edit_text()))
self.set_net_prop("dns1", noneToString(self.dns1.get_edit_text()))
self.set_net_prop("dns2", noneToString(self.dns2.get_edit_text()))
self.set_net_prop("dns3", noneToString(self.dns3.get_edit_text()))
elif self.static_dns_cb.get_state() and \
self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', True)
else:
self.set_net_prop('use_static_dns', False)
self.set_net_prop('use_global_dns', False)
self.set_net_prop('dns_domain', '')
self.set_net_prop("search_domain", '')
self.set_net_prop("dns1", '')
self.set_net_prop("dns2", '')
self.set_net_prop("dns3", '')
self.set_net_prop('dhcphostname',self.dhcp_h.get_edit_text())
self.set_net_prop('usedhcphostname',self.use_dhcp_h.get_state())
# Prevent comboboxes from dying.
def ready_widgets(self,ui,body):
pass
def __init__(self, body, pos, ui, dbus=None):
global daemon, wireless, wired
self.thebackends = None
self.backends = None
self.wpadrivers = None
self.thedrivers = None
daemon = dbus['daemon']
wireless = dbus['wireless']
wired = dbus['wired']
width, height = ui.get_cols_rows()
height -= 3
#width = 80
#height = 20
# Stuff that goes at the top
header0_t = _('General Settings')
header1_t = _('External Programs')
header2_t = _('Advanced Settings')
self.header0 = urwid.AttrWrap(SelText(header0_t), 'tab active', 'focus')
self.header1 = urwid.AttrWrap(SelText(header1_t), 'body', 'focus')
self.header2 = urwid.AttrWrap(SelText(header2_t), 'body', 'focus')
title = ('Preferences')
# Blank line
_blank = urwid.Text('')
####
#### Text in the widgets
####
# General Settings
net_cat_t = ('header', ('Network Interfaces'))
wired_t = ('editcp', ('Wired Interface') + ': ')
wless_t = ('editcp', ('Wireless Interface') + ':')
always_show_wired_t = _('Always show wired interface')
prefer_wired_t = _('Always switch to wired connection when available')
global_dns_cat_t = ('header', _('Global DNS servers'))
global_dns_t = ('editcp', _('Use global DNS servers'))
dns_dom_t = ('editcp', ' ' + _('DNS domain') + ': ')
search_dom_t = ('editcp', ' ' + _('Search domain') + ':')
dns1_t = ('editcp', ' ' + _('DNS server') + ' 1: ')
dns2_t = ('editcp', ' ' + _('DNS server') + ' 2: ')
dns3_t = ('editcp', ' ' + _('DNS server') + ' 3: ')
wired_auto_cat_t = ('header', _('Wired Autoconnect Settings'))
wired_auto_1_t = _('Use default profile on wired autoconnect')
wired_auto_2_t = _('Prompt for profile on wired autoconnect')
wired_auto_3_t = _('Use last used profile on wired autoconnect')
auto_reconn_cat_t = ('header', _('Automatic Reconnection'))
auto_reconn_t = _('Automatically reconnect on connection loss')
#### External Programs
automatic_t = _('Automatic (recommended)')
dhcp_header_t = ('header', _('DHCP Client'))
# Automatic
dhcp1_t = 'dhclient'
dhcp2_t = 'dhcpcd'
dhcp3_t = 'pump'
dhcp4_t = 'udhcpc'
wired_detect_header_t = ('header', _('Wired Link Detection'))
wired1_t = 'ethtool'
wired2_t = 'mii-tool'
flush_header_t = ('header', _('Route Table Flushing'))
flush1_t = 'ip'
flush2_t = 'route'
#### Advanced Settings
wpa_cat_t = ('header', _('WPA Supplicant'))
wpa_t = ('editcp', 'Driver:')
wpa_list = []
wpa_warn_t = ('important',
_('You should almost always use wext as the WPA supplicant driver'))
backend_cat_t = ('header', _('Backend'))
backend_t = _('Backend') + ':'
backend_list = []
debug_cat_t = ('header', _('Debugging'))
debug_mode_t = _('Enable debug mode')
wless_cat_t = ('header', _('Wireless Interface'))
use_dbm_t = _('Use dBm to measure signal strength')
verify_ap_t = \
_('Ping static gateways after connecting to verify association')
####
#### UI Widgets
####
# General Settings
self.net_cat = urwid.Text(net_cat_t)
self.wired_edit = \
urwid.AttrWrap(urwid.Edit(wired_t), 'editbx', 'editfc')
self.wless_edit = \
urwid.AttrWrap(urwid.Edit(wless_t), 'editbx', 'editfc')
self.prefer_wired_chkbx = urwid.CheckBox(prefer_wired_t)
self.global_dns_cat = urwid.Text(global_dns_cat_t)
# Default the global DNS settings to off. They will be reenabled later
# if so required.
global_dns_state = False
self.global_dns_checkb = urwid.CheckBox(global_dns_t,
global_dns_state,
on_state_change=self.global_dns_trigger
)
self.search_dom = DynWrap(urwid.Edit(search_dom_t), global_dns_state)
self.dns_dom = DynWrap(urwid.Edit(dns_dom_t), global_dns_state)
self.dns1 = DynWrap(urwid.Edit(dns1_t), global_dns_state)
self.dns2 = DynWrap(urwid.Edit(dns2_t), global_dns_state)
self.dns3 = DynWrap(urwid.Edit(dns3_t), global_dns_state)
self.always_show_wired_checkb = urwid.CheckBox(always_show_wired_t)
self.wired_auto_l = []
self.wired_auto_cat = urwid.Text(wired_auto_cat_t)
self.wired_auto_1 = urwid.RadioButton(self.wired_auto_l, wired_auto_1_t)
self.wired_auto_2 = urwid.RadioButton(self.wired_auto_l, wired_auto_2_t)
self.wired_auto_3 = urwid.RadioButton(self.wired_auto_l, wired_auto_3_t)
self.auto_reconn_cat = urwid.Text(auto_reconn_cat_t)
self.auto_reconn_checkb = urwid.CheckBox(auto_reconn_t)
generalLB = urwid.ListBox([
self.net_cat,
self.wless_edit, # _blank,
self.wired_edit,
self.always_show_wired_checkb,
self.prefer_wired_chkbx, _blank,
self.global_dns_cat,
self.global_dns_checkb, # _blank,
self.search_dom, self.dns_dom,
self.dns1, self.dns2, self.dns3, _blank,
self.wired_auto_cat,
self.wired_auto_1,
self.wired_auto_2,
self.wired_auto_3, _blank,
self.auto_reconn_cat,
self.auto_reconn_checkb
])
#### External Programs tab
automatic_t = _('Automatic (recommended)')
self.dhcp_header = urwid.Text(dhcp_header_t)
self.dhcp_l = []
# Order of these is flipped in the actual interface,
# (2, 3, 1 -> dhcpcd, pump, dhclient), because dhclient often doesn't
# like to work on several distros.
self.dhcp0 = urwid.RadioButton(self.dhcp_l, automatic_t)
self.dhcp1 = DynRadioButton(self.dhcp_l, dhcp1_t)
self.dhcp2 = DynRadioButton(self.dhcp_l, dhcp2_t)
self.dhcp3 = DynRadioButton(self.dhcp_l, dhcp3_t)
self.dhcp4 = DynRadioButton(self.dhcp_l, dhcp4_t)
self.dhcp_l = [
self.dhcp0, self.dhcp1, self.dhcp2, self.dhcp3, self.dhcp4
]
self.wired_l = []
self.wired_detect_header = urwid.Text(wired_detect_header_t)
self.wired0 = urwid.RadioButton(self.wired_l, automatic_t)
self.wired1 = DynRadioButton(self.wired_l, wired1_t)
self.wired2 = DynRadioButton(self.wired_l, wired2_t)
self.wired_l = [self.wired0, self.wired1, self.wired2]
self.flush_l = []
self.flush_header = urwid.Text(flush_header_t)
self.flush0 = urwid.RadioButton(self.flush_l, automatic_t)
self.flush1 = DynRadioButton(self.flush_l, flush1_t)
self.flush2 = DynRadioButton(self.flush_l, flush2_t)
self.flush_l = [self.flush0, self.flush1, self.flush2]
externalLB = urwid.ListBox([
self.dhcp_header,
self.dhcp0, self.dhcp2, self.dhcp3, self.dhcp1, self.dhcp4,
_blank,
self.wired_detect_header,
self.wired0, self.wired1, self.wired2,
_blank,
self.flush_header,
self.flush0, self.flush1, self.flush2
])
#### Advanced settings
self.wpa_cat = urwid.Text(wpa_cat_t)
self.wpa_cbox = ComboBox(wpa_t)
self.wpa_warn = urwid.Text(wpa_warn_t)
self.backend_cat = urwid.Text(backend_cat_t)
self.backend_cbox = ComboBox(backend_t)
self.debug_cat = urwid.Text(debug_cat_t)
self.debug_mode_checkb = urwid.CheckBox(debug_mode_t)
self.wless_cat = urwid.Text(wless_cat_t)
self.use_dbm_checkb = urwid.CheckBox(use_dbm_t)
self.verify_ap_checkb = urwid.CheckBox(verify_ap_t)
advancedLB = urwid.ListBox([
self.wpa_cat,
self.wpa_cbox, self.wpa_warn, _blank,
self.backend_cat,
self.backend_cbox, _blank,
self.debug_cat,
self.debug_mode_checkb, _blank,
self.wless_cat,
self.use_dbm_checkb, _blank,
self.verify_ap_checkb, _blank
])
headerList = [self.header0, self.header1, self.header2]
lbList = [generalLB, externalLB, advancedLB]
self.tab_map = {
self.header0: generalLB,
self.header1: externalLB,
self.header2: advancedLB
}
#self.load_settings()
self.tabs = TabColumns(headerList, lbList, _('Preferences'))
# pylint: disable-msg=E1101
self.__super.__init__(self.tabs)
def __init__(self):
self.ui=None
static_ip_t = language['use_static_ip']
ip_t = ('editcp',language['ip']+': ')
netmask_t = ('editcp',language['netmask']+':')
gateway_t = ('editcp',language['gateway']+':')
use_static_dns_t = language['use_static_dns']
use_global_dns_t = language['use_global_dns']
dns_dom_t = ('editcp',language['dns_domain']+': ')
search_dom_t = ('editcp',language['search_domain']+':')
dns1_t = ('editcp',language['dns']+ ' 1'+':'+' '*8)
dns2_t = ('editcp',language['dns']+ ' 2'+':'+' '*8)
dns3_t = ('editcp',language['dns']+ ' 3'+':'+' '*8)
use_dhcp_h_t = ("Use DHCP Hostname")
dhcp_h_t = ('editcp',"DHCP Hostname: ")
cancel_t = 'Cancel'
ok_t = 'OK'
self.static_ip_cb = urwid.CheckBox(static_ip_t,
on_state_change=self.static_ip_toggle)
self.ip_edit = DynWrap(urwid.Edit(ip_t),False)
self.netmask_edit = DynWrap(urwid.Edit(netmask_t),False)
self.gateway_edit = DynWrap(urwid.Edit(gateway_t),False)
self.static_dns_cb = DynWrap(urwid.CheckBox(use_static_dns_t,
on_state_change=self.dns_toggle),True,('body','editnfc'),None)
self.global_dns_cb = DynWrap(urwid.CheckBox(use_global_dns_t,
on_state_change=self.dns_toggle),False,('body','editnfc'),None)
self.checkb_cols = urwid.Columns([self.static_dns_cb,
self.global_dns_cb])
self.dns_dom_edit = DynWrap(urwid.Edit(dns_dom_t) ,False)
self.search_dom_edit = DynWrap(urwid.Edit(search_dom_t),False)
self.dns1 = DynWrap(urwid.Edit(dns1_t) ,False)
self.dns2 = DynWrap(urwid.Edit(dns2_t) ,False)
self.dns3 = DynWrap(urwid.Edit(dns3_t) ,False)
self.use_dhcp_h = urwid.CheckBox(use_dhcp_h_t,False,on_state_change=self.use_dhcp_h_toggle)
self.dhcp_h = DynWrap(urwid.Edit(dhcp_h_t),False)
_blank = urwid.Text('')
walker = urwid.SimpleListWalker([self.static_ip_cb,
self.ip_edit,
self.netmask_edit,
self.gateway_edit,
_blank,
self.checkb_cols,
self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3,
_blank,
self.use_dhcp_h,
self.dhcp_h,
_blank
])
self._listbox = urwid.ListBox(walker)
self._frame = urwid.Frame(self._listbox)
self.__super.__init__(self._frame)
class AdvancedSettingsDialog(urwid.WidgetWrap):
def __init__(self):
self.ui=None
static_ip_t = language['use_static_ip']
ip_t = ('editcp',language['ip']+': ')
netmask_t = ('editcp',language['netmask']+':')
gateway_t = ('editcp',language['gateway']+':')
use_static_dns_t = language['use_static_dns']
use_global_dns_t = language['use_global_dns']
dns_dom_t = ('editcp',language['dns_domain']+': ')
search_dom_t = ('editcp',language['search_domain']+':')
dns1_t = ('editcp',language['dns']+ ' 1'+':'+' '*8)
dns2_t = ('editcp',language['dns']+ ' 2'+':'+' '*8)
dns3_t = ('editcp',language['dns']+ ' 3'+':'+' '*8)
use_dhcp_h_t = ("Use DHCP Hostname")
dhcp_h_t = ('editcp',"DHCP Hostname: ")
cancel_t = 'Cancel'
ok_t = 'OK'
self.static_ip_cb = urwid.CheckBox(static_ip_t,
on_state_change=self.static_ip_toggle)
self.ip_edit = DynWrap(urwid.Edit(ip_t),False)
self.netmask_edit = DynWrap(urwid.Edit(netmask_t),False)
self.gateway_edit = DynWrap(urwid.Edit(gateway_t),False)
self.static_dns_cb = DynWrap(urwid.CheckBox(use_static_dns_t,
on_state_change=self.dns_toggle),True,('body','editnfc'),None)
self.global_dns_cb = DynWrap(urwid.CheckBox(use_global_dns_t,
on_state_change=self.dns_toggle),False,('body','editnfc'),None)
self.checkb_cols = urwid.Columns([self.static_dns_cb,
self.global_dns_cb])
self.dns_dom_edit = DynWrap(urwid.Edit(dns_dom_t) ,False)
self.search_dom_edit = DynWrap(urwid.Edit(search_dom_t),False)
self.dns1 = DynWrap(urwid.Edit(dns1_t) ,False)
self.dns2 = DynWrap(urwid.Edit(dns2_t) ,False)
self.dns3 = DynWrap(urwid.Edit(dns3_t) ,False)
self.use_dhcp_h = urwid.CheckBox(use_dhcp_h_t,False,on_state_change=self.use_dhcp_h_toggle)
self.dhcp_h = DynWrap(urwid.Edit(dhcp_h_t),False)
_blank = urwid.Text('')
walker = urwid.SimpleListWalker([self.static_ip_cb,
self.ip_edit,
self.netmask_edit,
self.gateway_edit,
_blank,
self.checkb_cols,
self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3,
_blank,
self.use_dhcp_h,
self.dhcp_h,
_blank
])
self._listbox = urwid.ListBox(walker)
self._frame = urwid.Frame(self._listbox)
self.__super.__init__(self._frame)
def use_dhcp_h_toggle(self,checkb,new_state,user_data=None):
self.dhcp_h.set_sensitive(new_state)
def static_ip_toggle(self,checkb,new_state,user_data=None):
for w in [ self.ip_edit,self.netmask_edit,self.gateway_edit ]:
w.set_sensitive(new_state)
self.static_dns_cb.set_state(new_state)
self.static_dns_cb.set_sensitive(not new_state)
if new_state:
self.checkb_cols.set_focus(self.global_dns_cb)
else:
self.checkb_cols.set_focus(self.static_dns_cb)
def dns_toggle(self,checkb,new_state,user_data=None):
if checkb == self.static_dns_cb.get_w():
for w in [ self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3 ]:
w.set_sensitive(new_state)
if not new_state:
self.global_dns_cb.set_state(False,do_callback=False)
self.global_dns_cb.set_sensitive(new_state)
# use_global_dns_cb is DynWrapped
if checkb == self.global_dns_cb.get_w():
for w in [self.dns_dom_edit,self.search_dom_edit,
self.dns1,self.dns2,self.dns3 ]:
w.set_sensitive(not new_state)
# Code totally yanked from netentry.py
def save_settings(self):
""" Save settings common to wired and wireless settings dialogs. """
if self.static_ip_cb.get_state():
for i in [self.ip_edit,self.netmask_edit,self.gateway_edit]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop("ip", noneToString(self.ip_edit.get_edit_text()))
self.set_net_prop("netmask", noneToString(self.netmask_edit.get_edit_text()))
self.set_net_prop("gateway", noneToString(self.gateway_edit.get_edit_text()))
else:
self.set_net_prop("ip", '')
self.set_net_prop("netmask", '')
self.set_net_prop("gateway", '')
if self.static_dns_cb.get_state() and \
not self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', False)
# Strip addressses before checking them in the daemon.
for i in [self.dns1, self.dns2,
self.dns3,self.dns_dom_edit, self.search_dom_edit]:
i.set_edit_text(i.get_edit_text().strip())
self.set_net_prop('dns_domain', noneToString(self.dns_dom_edit.get_edit_text()))
self.set_net_prop("search_domain", noneToString(self.search_dom_edit.get_edit_text()))
self.set_net_prop("dns1", noneToString(self.dns1.get_edit_text()))
self.set_net_prop("dns2", noneToString(self.dns2.get_edit_text()))
self.set_net_prop("dns3", noneToString(self.dns3.get_edit_text()))
elif self.static_dns_cb.get_state() and \
self.global_dns_cb.get_state():
self.set_net_prop('use_static_dns', True)
self.set_net_prop('use_global_dns', True)
else:
self.set_net_prop('use_static_dns', False)
self.set_net_prop('use_global_dns', False)
self.set_net_prop('dns_domain', '')
self.set_net_prop("search_domain", '')
self.set_net_prop("dns1", '')
self.set_net_prop("dns2", '')
self.set_net_prop("dns3", '')
self.set_net_prop('dhcphostname',self.dhcp_h.get_edit_text())
self.set_net_prop('usedhcphostname',self.use_dhcp_h.get_state())
# Prevent comboboxes from dying.
def ready_widgets(self,ui,body):
pass