def test_flow_count_limit(self):
"""
"""
bel = solph.Bus(label='electricityBus')
solph.Source(label='source1',
outputs={
bel:
solph.Flow(nonconvex=solph.NonConvex(),
nominal_value=100,
emission_factor=[0.5, -1.0, 2.0])
})
solph.Source(label='source2',
outputs={
bel:
solph.Flow(nonconvex=solph.NonConvex(),
nominal_value=100,
emission_factor=3.5)
})
# Should be ignored because emission_factor is not defined.
solph.Source(label='source3',
outputs={
bel:
solph.Flow(nonconvex=solph.NonConvex(),
nominal_value=100)
})
# Should be ignored because it is not NonConvex.
solph.Source(label='source4',
outputs={
bel:
solph.Flow(emission_factor=1.5,
min=0.3,
nominal_value=100)
})
om = self.get_om()
# one of the two flows has to be active
solph.constraints.limit_active_flow_count_by_keyword(om,
"emission_factor",
lower_limit=1,
upper_limit=2)
self.compare_lp_files('flow_count_limit.lp', my_om=om)
def test_offsettransformer__too_many_input_flows():
"""Too many Input Flows defined."""
with tools.assert_raises_regexp(
ValueError, 'OffsetTransformer` must not have more than 1'):
bgas = solph.Bus(label='GasBus')
bcoal = solph.Bus(label='CoalBus')
solph.components.OffsetTransformer(
label='ostf_2_in',
inputs={
bgas: solph.Flow(
nominal_value=60, min=0.5, max=1.0,
nonconvex=solph.NonConvex()),
bcoal: solph.Flow(
nominal_value=30, min=0.3, max=1.0,
nonconvex=solph.NonConvex())
},
coefficients=(20, 0.5))
def test_flow_classes():
with assert_raises(ValueError):
solph.Flow(fixed=True)
with assert_raises(ValueError):
solph.Flow(investment=solph.Investment(), nominal_value=4)
with assert_raises(ValueError):
solph.Flow(investment=solph.Investment(), nonconvex=solph.NonConvex())
with assert_raises(AttributeError):
solph.Flow(fixed_costs=34)
def add_heatpipes_exist(pipes, labels, gd, q, b_in, b_out, nodes):
"""
Adds *HeatPipeline* objects with fix capacity for existing pipes
to the list of oemof.solph components.
Parameters
----------
pipes
labels : dict
Dictonary containing specifications for label-tuple.
gd : dict
Settings of the investment optimisation of the ThermalNetwork
q : pd.Series
Specific *Pipe* of ThermalNetwork
b_in : oemof.solph.Bus
Bus of Inflow
b_out : oemof.solph.Bus
Bus of Outflow
nodes : list
All oemof.solph components are added to the list
Returns
-------
list : Updated list of nodes.
"""
# get index of existing pipe label of pipe data
ind_pipe = pipes[pipes['label_3'] == q['hp_type']].index[0]
t = pipes.loc[ind_pipe]
# get label of pipe
labels['l_3'] = t['label_3']
hlf = t['l_factor'] * q['length']
hlff = t['l_factor_fix'] * q['length']
flow_bi_args = {
'bidirectional': True, 'min': -1} \
if gd['bidirectional_pipes'] else {}
outflow_args = {'nonconvex': solph.NonConvex()} if t['nonconvex'] else {}
nodes.append(oh.HeatPipeline(
label=oh.Label(labels['l_1'], labels['l_2'],
labels['l_3'], labels['l_4']),
inputs={b_in: solph.Flow(**flow_bi_args)},
outputs={b_out: solph.Flow(
nominal_value=q['capacity'],
**flow_bi_args,
**outflow_args,
)},
heat_loss_factor=hlf,
heat_loss_factor_fix=hlff,
))
return nodes
def test_maximum_shutdowns(self):
"""Testing maximum_shutdowns attribute for nonconvex flows."""
bus_t = solph.Bus(label='Bus_C')
solph.Source(label='cheap_plant_maximum_shutdowns',
outputs={
bus_t:
solph.Flow(
nominal_value=10,
min=0.5,
max=1.0,
variable_costs=10,
nonconvex=solph.NonConvex(maximum_shutdowns=2))
})
self.compare_lp_files('maximum_shutdowns.lp')
def test_offsettransformer_too_many_output_flows():
"""Too many Output Flows defined."""
with tools.assert_raises_regexp(
ValueError, 'OffsetTransformer` must not have more than 1'):
bm1 = solph.Bus(label='my_offset_Bus1')
bm2 = solph.Bus(label='my_offset_Bus2')
solph.components.OffsetTransformer(
label='ostf_2_out',
inputs={
bm1: solph.Flow(
nominal_value=60, min=0.5, max=1.0,
nonconvex=solph.NonConvex())
},
outputs={bm1: solph.Flow(),
bm2: solph.Flow()},
coefficients=(20, 0.5))
def test_min_max_runtime(self):
"""Testing min and max runtimes for nonconvex flows."""
bus_t = solph.Bus(label='Bus_T')
solph.Source(label='cheap_plant_min_down_constraints',
outputs={
bus_t:
solph.Flow(nominal_value=10,
min=0.5,
max=1.0,
variable_costs=10,
nonconvex=solph.NonConvex(
minimum_downtime=4,
minimum_uptime=2,
initial_status=2,
startup_costs=5,
shutdown_costs=7))
})
self.compare_lp_files('min_max_runtime.lp')
def test_offsettransformer(self):
"""Constraint test of a OffsetTransformer.
"""
bgas = solph.Bus(label='gasBus')
bth = solph.Bus(label='thermalBus')
solph.components.OffsetTransformer(label='gasboiler',
inputs={
bgas:
solph.Flow(
nonconvex=solph.NonConvex(),
nominal_value=100,
min=0.32,
)
},
outputs={bth: solph.Flow()},
coefficients=[-17, 0.9])
self.compare_lp_files('offsettransformer.lp')
solph.Flow(fixed=True,
actual_value=data['demand_el'],
nominal_value=10)
})
dummy_el = solph.Sink(label='dummy_el',
inputs={bel: solph.Flow(variable_costs=10)})
pp1 = solph.Source(label='plant_min_down_constraints',
outputs={
bel:
solph.Flow(nominal_value=10,
min=0.5,
max=1.0,
variable_costs=10,
nonconvex=solph.NonConvex(minimum_downtime=4,
initial_status=0))
})
pp2 = solph.Source(label='plant_min_up_constraints',
outputs={
bel:
solph.Flow(nominal_value=10,
min=0.5,
max=1.0,
variable_costs=10,
nonconvex=solph.NonConvex(minimum_uptime=2,
initial_status=1))
})
# create an optimization problem and solve it
om = solph.Model(es)
demand_el = solph.Sink(label='demand_el', inputs={bel: solph.Flow(
variable_costs=data['price_el'])})
# combined cycle extraction turbine
ccet = solph.components.GenericCHP(
label='combined_cycle_extraction_turbine',
fuel_input={bgas: solph.Flow(
H_L_FG_share_max=[0.19 for p in range(0, periods)])},
electrical_output={bel: solph.Flow(
nominal_value=200, min= 80/200,
P_max_woDH=[200 for p in range(0, periods)],
P_min_woDH=[80 for p in range(0, periods)],
Eta_el_max_woDH=[0.53 for p in range(0, periods)],
Eta_el_min_woDH=[0.43 for p in range(0, periods)],
nonconvex=solph.NonConvex(startup_costs=5, shutdown_costs=5))},
heat_output={bth: solph.Flow(
Q_CW_min=[30 for p in range(0, periods)])},
Beta=[0.19 for p in range(0, periods)],
back_pressure=False)
# create an optimization problem and solve it
om = solph.Model(es)
# debugging
# om.write('generic_chp.lp', io_options={'symbolic_solver_labels': True})
# solve model
om.solve(solver='cplex', solve_kwargs={'tee': True})
# create result object
def test_wrong_combination_of_options():
msg = "Investment flows cannot be combined with nonconvex flows!"
with pytest.raises(ValueError, match=msg):
solph.Flow(investment=solph.Investment(), nonconvex=solph.NonConvex())
def test_gen_ostf():
# read sequence data
full_filename = os.path.join(os.path.dirname(__file__), 'ostf.csv')
data = pd.read_csv(full_filename)
# select periods
periods = len(data) - 1
# create an energy system
idx = pd.date_range('1/1/2017', periods=periods, freq='H')
es = solph.EnergySystem(timeindex=idx)
Node.registry = es
# resources
bgas = solph.Bus(label='bgas')
solph.Source(label='rgas', outputs={bgas: solph.Flow()})
# heat
bth = solph.Bus(label='bth')
solph.Source(label='source_th',
outputs={bth: solph.Flow(variable_costs=1000)})
solph.Sink(label='demand_th',
inputs={
bth:
solph.Flow(fixed=True,
actual_value=data['demand_th'],
nominal_value=200)
})
# power
bel = solph.Bus(label='bel')
solph.Source(label='source_el',
outputs={bel: solph.Flow(variable_costs=data['price_el'])})
# generic chp
hp = solph.custom.OffsetTransformer(
label='heat_pump',
inputs={
bel:
solph.Flow(nominal_value=100,
max=[1 for i in range(0, periods)],
min=[0.25 for i in range(0, periods)],
nonconvex=solph.NonConvex())
},
outputs={bth: solph.Flow()},
coefficients=[[0 for i in range(0, periods)],
[2 for i in range(0, periods)]])
# create an optimization problem and solve it
om = solph.Model(es)
# solve model
om.solve(solver='cbc')
# create result object
results = processing.results(om)
data = views.node(results, 'bth')['sequences'].sum(axis=0).to_dict()
test_dict = {
(('heat_pump', 'bth'), 'flow'): 18800.0,
(('source_th', 'bth'), 'flow'): 1200.0,
(('bth', 'demand_th'), 'flow'): 20000.0
}
for key in test_dict.keys():
eq_(int(round(data[key])), int(round(test_dict[key])))
conversion_factors={bel: 0.5}))
energysystem.add(
Transformer(label='pp_gas',
inputs={bgas: Flow()},
outputs={bel: Flow(nominal_value=41, variable_costs=40)},
conversion_factors={bel: 0.50}))
energysystem.add(
solph.custom.OffsetTransformer(label='ostf',
inputs={
bgas:
solph.Flow(nominal_value=60,
min=0.5,
max=1.0,
nonconvex=solph.NonConvex())
},
outputs={bel: solph.Flow()},
coefficients={(bgas, bel): [20, 0.5]}))
# create the model
optimization_model = Model(energysystem)
# solve problem
optimization_model.solve(solver=solver,
solve_kwargs={
'tee': False,
'keepfiles': False
})
meta_results = outputlib.processing.meta_results(optimization_model)
back_pressure=True)
es_ref.add(bpt)
# 30% m-Teillast bei 65-114°C und 50% m-Teillast bei 115-124°C
if param.loc[('HP', 'active'), 'value'] == 1:
hp = solph.components.OffsetTransformer(
label='Wärmepumpe',
inputs={
enw:
solph.Flow(nominal_value=1,
max=data['P_max_hp'],
min=data['P_min_hp'],
variable_costs=param.loc[('HP', 'op_cost_var'),
'value'],
nonconvex=solph.NonConvex())
},
outputs={wnw: solph.Flow()},
coefficients=[data['c_0_hp'], data['c_1_hp']])
es_ref.add(hp)
# %% Speicher
# Saisonaler Speicher
if param.loc[('TES', 'active'), 'value'] == 1:
tes = solph.components.GenericStorage(
label='Wärmespeicher',
nominal_storage_capacity=param.loc[('TES', 'Q'), 'value'],
inputs={
wnw:
def main():
"""Execute main script."""
def invest_sol(A, col_type=''):
"""Pehnt et al. 2017, Markus [38].
A: Kollektorfläche der Solarthermie
col_type: Kollektortyp der Solarthermie
specific_coasts: Spezifische Kosten
invest: Investitionskosten
"""
if col_type == 'flat':
specific_costs = -34.06 * np.log(A) + 592.48
invest = A * specific_costs
return invest
elif col_type == 'vacuum':
specific_costs = -40.63 * np.log(A) + 726.64
invest = A * specific_costs
return invest
else:
raise ValueError(
"Choose a valid collector type: 'flat' or 'vacuum'")
def liste(parameter):
"""Get timeseries list of parameter for solph components."""
return [parameter for p in range(0, periods)]
def result_labelling(dataframe):
for col in dataframe.columns:
if col in labeldict:
dataframe.rename(columns={col: labeldict[col]}, inplace=True)
else:
print(col, ' not in labeldict')
# %% Preprocessing
# %% Daten einlesen
dirpath = path.abspath(path.join(__file__, "../.."))
filename = path.join(dirpath, 'Eingangsdaten\\simulation_data.csv')
data = pd.read_csv(filename, sep=";")
# filename = path.join(dirpath, 'Eingangsdaten\\All_parameters.csv')
# param = pd.read_csv(filename, sep=";", index_col=['plant', 'parameter'])
filepath = path.join(dirpath, 'Eingangsdaten\\parameter_v2b.json')
with open(filepath, 'r') as file:
param = json.load(file)
# TODO
cop_lt = 4.9501
A = param['Sol']['A']
invest_solar = invest_sol(A, col_type="flat")
# %% Zeitreihe
periods = len(data)
date_time_index = pd.date_range('1/1/2016 00:00:00',
periods=periods,
freq='h')
# %% Energiesystem erstellen
es_ref = solph.EnergySystem(timeindex=date_time_index)
# %% Wärmebedarf
# rel_demand ist die Variable, die den Wärmebedarf der Region
# prozentual von FL angibt.
heat_demand_FL = data['heat_demand']
rel_heat_demand = 1
heat_demand_local = heat_demand_FL * rel_heat_demand
total_heat_demand = float(heat_demand_local.sum())
# %% Energiesystem
# %% LT-WNW Plausibilität prüfen
if (param['LT-HP']['active'] and not param['Sol']['active']
and not param['TES']['active']):
print("WARNING: You can't have the low temp heat pump active without ",
"using either the TES or solar heat.")
exit()
elif (not param['LT-HP']['active']
and (param['Sol']['active'] or param['TES']['active'])):
print(
"WARNING: You can't use TES or solar heat without using the low ",
"temp heat pump.")
exit()
# %% Busses
gnw = solph.Bus(label='Gasnetzwerk')
enw = solph.Bus(label='Elektrizitätsnetzwerk')
wnw = solph.Bus(label='Wärmenetzwerk')
lt_wnw = solph.Bus(label='LT-Wärmenetzwerk')
es_ref.add(gnw, enw, wnw, lt_wnw)
# %% Soruces
gas_source = solph.Source(
label='Gasquelle',
outputs={
gnw:
solph.Flow(variable_costs=(param['param']['gas_price'] +
param['param']['co2_certificate']))
})
elec_source = solph.Source(
label='Stromquelle',
outputs={
enw:
solph.Flow(
variable_costs=(param['param']['elec_consumer_charges'] +
data['el_spot_price']))
})
es_ref.add(gas_source, elec_source)
if param['Sol']['active']:
solar_source = solph.Source(
label='Solarthermie',
outputs={
lt_wnw:
solph.Flow(variable_costs=(0.01 * invest_solar) /
(A * data['solar_data'].sum()),
nominal_value=(max(data['solar_data']) * A),
actual_value=(data['solar_data']) /
(max(data['solar_data'])),
fixed=True)
})
es_ref.add(solar_source)
if param['MR']['active']:
mr_source = solph.Source(label='Mustrun',
outputs={
wnw:
solph.Flow(variable_costs=0,
nominal_value=float(
param['MR']['Q_N']),
actual_value=1)
})
es_ref.add(mr_source)
# %% Sinks
elec_sink = solph.Sink(
label='Spotmarkt',
inputs={enw: solph.Flow(variable_costs=-data['el_spot_price'])})
heat_sink = solph.Sink(
label='Wärmebedarf',
inputs={
wnw:
solph.Flow(variable_costs=-param['param']['heat_price'],
nominal_value=max(heat_demand_local),
actual_value=heat_demand_local / max(heat_demand_local),
fixed=True)
})
es_ref.add(elec_sink, heat_sink)
if param['EC']['active']:
ec_sink = solph.Sink(label='Emergency-cooling',
inputs={wnw: solph.Flow(variable_costs=0)})
es_ref.add(ec_sink)
# %% Transformer
if param['EHK']['active']:
for i in range(1, param['EHK']['amount'] + 1):
ehk = solph.Transformer(
label='Elektroheizkessel_' + str(i),
inputs={enw: solph.Flow()},
outputs={
wnw:
solph.Flow(nominal_value=param['EHK']['Q_N'],
max=1,
min=0,
variable_costs=param['EHK']['op_cost_var'])
},
conversion_factors={wnw: param['EHK']['eta']})
es_ref.add(ehk)
if param['SLK']['active']:
for i in range(1, param['SLK']['amount'] + 1):
slk = solph.Transformer(
label='Spitzenlastkessel_' + str(i),
inputs={gnw: solph.Flow()},
outputs={
wnw:
solph.Flow(nominal_value=param['SLK']['Q_N'],
max=1,
min=0,
variable_costs=(param['SLK']['op_cost_var'] +
param['param']['energy_tax']))
},
conversion_factors={wnw: param['SLK']['eta']})
es_ref.add(slk)
if param['BHKW']['active']:
for i in range(1, param['BHKW']['amount'] + 1):
bhkw = solph.components.GenericCHP(
label='BHKW_' + str(i),
fuel_input={
gnw:
solph.Flow(H_L_FG_share_max=liste(
param['BHKW']['H_L_FG_share_max']),
H_L_FG_share_min=liste(
param['BHKW']['H_L_FG_share_min']),
nominal_value=param['BHKW']['Q_in'])
},
electrical_output={
enw:
solph.Flow(variable_costs=param['BHKW']['op_cost_var'],
P_max_woDH=liste(param['BHKW']['P_max_woDH']),
P_min_woDH=liste(param['BHKW']['P_min_woDH']),
Eta_el_max_woDH=liste(
param['BHKW']['Eta_el_max_woDH']),
Eta_el_min_woDH=liste(
param['BHKW']['Eta_el_min_woDH']))
},
heat_output={
wnw: solph.Flow(Q_CW_min=liste(0), Q_CW_max=liste(0))
},
Beta=liste(0),
back_pressure=False)
es_ref.add(bhkw)
if param['GuD']['active']:
for i in range(1, param['GuD']['amount'] + 1):
gud = solph.components.GenericCHP(
label='GuD_' + str(i),
fuel_input={
gnw:
solph.Flow(H_L_FG_share_max=liste(
param['GuD']['H_L_FG_share_max']),
nominal_value=param['GuD']['Q_in'])
},
electrical_output={
enw:
solph.Flow(
variable_costs=param['GuD']['op_cost_var'],
P_max_woDH=liste(param['GuD']['P_max_woDH']),
P_min_woDH=liste(param['GuD']['P_min_woDH']),
Eta_el_max_woDH=liste(param['GuD']['Eta_el_max_woDH']),
Eta_el_min_woDH=liste(param['GuD']['Eta_el_min_woDH']))
},
heat_output={
wnw:
solph.Flow(Q_CW_min=liste(param['GuD']['Q_CW_min']),
Q_CW_max=liste(0))
},
Beta=liste(param['GuD']['beta']),
back_pressure=False)
es_ref.add(gud)
if param['BPT']['active']:
for i in range(1, param['BPT']['amount'] + 1):
bpt = solph.components.GenericCHP(
label='bpt' + str(i),
fuel_input={
gnw:
solph.Flow(H_L_FG_share_max=liste(
param['bpt']['H_L_FG_share_max']),
nominal_value=param['bpt']['Q_in'])
},
electrical_output={
enw:
solph.Flow(
variable_costs=param['bpt']['op_cost_var'],
P_max_woDH=liste(param['bpt']['P_max_woDH']),
P_min_woDH=liste(param['bpt']['P_min_woDH']),
Eta_el_max_woDH=liste(param['bpt']['Eta_el_max_woDH']),
Eta_el_min_woDH=liste(param['bpt']['Eta_el_min_woDH']))
},
heat_output={
wnw: solph.Flow(Q_CW_min=liste(0), Q_CW_max=liste(0))
},
Beta=liste(0),
back_pressure=True)
es_ref.add(bpt)
# 30% m-Teillast bei 65-114°C und 50% m-Teillast bei 115-124°C
if param['HP']['active']:
for i in range(1, param['HP']['amount'] + 1):
hp = solph.components.OffsetTransformer(
label='HP_' + str(i),
inputs={
enw:
solph.Flow(nominal_value=1,
max=data['P_max_hp'],
min=data['P_min_hp'],
variable_costs=param['HP']['op_cost_var'],
nonconvex=solph.NonConvex())
},
outputs={wnw: solph.Flow()},
coefficients=[data['c_0_hp'], data['c_1_hp']])
es_ref.add(hp)
# %% Speicher
# Saisonaler Speicher
if param['TES']['active']:
for i in range(1, param['TES']['amount'] + 1):
tes = solph.components.GenericStorage(
label='TES_' + str(i),
nominal_storage_capacity=param['TES']['Q'],
inputs={
wnw:
solph.Flow(
storageflowlimit=True,
nominal_value=param['TES']['Q_N_in'],
max=param['TES']['Q_rel_in_max'],
min=param['TES']['Q_rel_in_min'],
variable_costs=param['TES']['op_cost_var'],
nonconvex=solph.NonConvex(
minimum_uptime=int(param['TES']['min_uptime']),
initial_status=int(param['TES']['init_status'])))
},
outputs={
lt_wnw:
solph.Flow(
storageflowlimit=True,
nominal_value=param['TES']['Q_N_out'],
max=param['TES']['Q_rel_out_max'],
min=param['TES']['Q_rel_out_min'],
nonconvex=solph.NonConvex(
minimum_uptime=int(param['TES']['min_uptime'])))
},
initial_storage_level=param['TES']['init_storage'],
loss_rate=param['TES']['Q_rel_loss'],
inflow_conversion_factor=param['TES']['inflow_conv'],
outflow_conversion_factor=param['TES']['outflow_conv'])
es_ref.add(tes)
# Low temperature heat pump
if param['LT-HP']['active']:
for i in range(1, param['LT-HP']['amount'] + 1):
lthp = solph.Transformer(
label="LT-HP_" + str(i),
inputs={
lt_wnw: solph.Flow(),
enw: solph.Flow(variable_costs=param['HP']['op_cost_var'])
},
outputs={wnw: solph.Flow()},
conversion_factors={
enw: 1 / data['cop_lthp'],
lt_wnw: (data['cop_lthp'] - 1) / data['cop_lthp']
}
# conversion_factors={enw: 1/cop_lt,
# lt_wnw: (cop_lt-1)/cop_lt}
)
es_ref.add(lthp)
# %% Processing
# %% Solve
# Was bedeutet tee?
model = solph.Model(es_ref)
solph.constraints.limit_active_flow_count_by_keyword(model,
'storageflowlimit',
lower_limit=0,
upper_limit=1)
# model.write('my_model.lp', io_options={'symbolic_solver_labels': True})
model.solve(solver='gurobi',
solve_kwargs={'tee': True},
cmdline_options={"mipgap": "0.05"})
# %% Ergebnisse Energiesystem
# Ergebnisse in results
results = solph.processing.results(model)
# Main- und Metaergebnisse
es_ref.results['main'] = solph.processing.results(model)
es_ref.results['meta'] = solph.processing.meta_results(model)
invest_ges = 0
cost_Anlagen = 0
labeldict = {}
# Busses
data_gnw = views.node(results, 'Gasnetzwerk')['sequences']
data_enw = views.node(results, 'Elektrizitätsnetzwerk')['sequences']
data_wnw = views.node(results, 'Wärmenetzwerk')['sequences']
data_lt_wnw = views.node(results, 'LT-Wärmenetzwerk')['sequences']
labeldict[(('Gasquelle', 'Gasnetzwerk'), 'flow')] = 'H_source'
labeldict[(('Elektrizitätsnetzwerk', 'Spotmarkt'),
'flow')] = 'P_spot_market'
labeldict[(('Stromquelle', 'Elektrizitätsnetzwerk'), 'flow')] = 'P_source'
labeldict[(('Wärmenetzwerk', 'Wärmebedarf'), 'flow')] = 'Q_demand'
# Sources
data_gas_source = views.node(results, 'Gasquelle')['sequences']
data_elec_source = views.node(results, 'Stromquelle')['sequences']
if param['Sol']['active']:
data_solar_source = views.node(results, 'Solarthermie')['sequences']
invest_ges += invest_solar
cost_Anlagen += (data_solar_source[(
('Solarthermie', 'LT-Wärmenetzwerk'), 'flow')].sum() *
(0.01 * invest_solar) /
(A * data['solar_data'].sum()))
labeldict[(('Solarthermie', 'LT-Wärmenetzwerk'), 'flow')] = 'Q_Sol'
if param['MR']['active']:
data_mr_source = views.node(results, 'Mustrun')['sequences']
labeldict[(('Mustrun', 'Wärmenetzwerk'), 'flow')] = 'Q_MR'
# Sinks
data_elec_sink = views.node(results, 'Spotmarkt')['sequences']
data_heat_sink = views.node(results, 'Wärmebedarf')['sequences']
if param['EC']['active']:
data_ec = views.node(results, 'Emergency-cooling')['sequences']
labeldict[(('Wärmenetzwerk', 'Emergency-cooling'), 'flow')] = 'Q_EC'
# Transformer
if param['EHK']['active']:
invest_ges += (param['EHK']['inv_spez'] * param['EHK']['Q_N'] *
param['EHK']['amount'])
for i in range(1, param['EHK']['amount'] + 1):
label_id = 'Elektroheizkessel_' + str(i)
data_ehk = views.node(results, label_id)['sequences']
cost_Anlagen += (
data_ehk[((label_id, 'Wärmenetzwerk'), 'flow')].sum() *
param['EHK']['op_cost_var'] +
(param['EHK']['op_cost_fix'] * param['EHK']['Q_N']))
labeldict[((label_id, 'Wärmenetzwerk'),
'flow')] = 'Q_EHK_' + str(i)
labeldict[(('Elektrizitätsnetzwerk', label_id),
'flow')] = 'P_zu_EHK_' + str(i)
if param['SLK']['active']:
invest_ges += (param['SLK']['inv_spez'] * param['SLK']['Q_N'] *
param['SLK']['amount'])
for i in range(1, param['SLK']['amount'] + 1):
label_id = 'Spitzenlastkessel_' + str(i)
data_slk = views.node(results, label_id)['sequences']
cost_Anlagen += (
data_slk[((label_id, 'Wärmenetzwerk'), 'flow')].sum() *
(param['SLK']['op_cost_var'] + param['param']['energy_tax']) +
(param['SLK']['op_cost_fix'] * param['SLK']['Q_N']))
labeldict[((label_id, 'Wärmenetzwerk'),
'flow')] = 'Q_SLK_' + str(i)
labeldict[(('Gasnetzwerk', label_id), 'flow')] = 'H_SLK_' + str(i)
if param['BHKW']['active']:
invest_ges += (param['BHKW']['P_max_woDH'] *
param['BHKW']['inv_spez'] * param['BHKW']['amount'])
for i in range(1, param['BHKW']['amount'] + 1):
label_id = 'BHKW_' + str(i)
data_bhkw = views.node(results, label_id)['sequences']
cost_Anlagen += (
data_bhkw[(
(label_id, 'Elektrizitätsnetzwerk'), 'flow')].sum() *
param['BHKW']['op_cost_var'] +
(param['BHKW']['op_cost_fix'] * param['BHKW']['P_max_woDH']))
labeldict[((label_id, 'Wärmenetzwerk'), 'flow')] = 'Q_' + label_id
labeldict[((label_id, 'Elektrizitätsnetzwerk'),
'flow')] = 'P_' + label_id
labeldict[(('Gasnetzwerk', label_id), 'flow')] = 'H_' + label_id
if param['GuD']['active']:
invest_ges += (param['GuD']['P_max_woDH'] * param['GuD']['inv_spez'] *
param['GuD']['amount'])
for i in range(1, param['GuD']['amount'] + 1):
label_id = 'GuD_' + str(i)
data_gud = views.node(results, label_id)['sequences']
cost_Anlagen += (
data_gud[((label_id, 'Elektrizitätsnetzwerk'), 'flow')].sum() *
param['GuD']['op_cost_var'] +
(param['GuD']['op_cost_fix'] * param['GuD']['P_max_woDH']))
labeldict[((label_id, 'Wärmenetzwerk'), 'flow')] = 'Q_' + label_id
labeldict[((label_id, 'Elektrizitätsnetzwerk'),
'flow')] = 'P_' + label_id
labeldict[(('Gasnetzwerk', label_id), 'flow')] = 'H_' + label_id
if param['HP']['active']:
invest_ges += (param['HP']['inv_spez'] * data['P_max_hp'].max() *
param['HP']['amount'])
for i in range(1, param['HP']['amount'] + 1):
label_id = 'HP_' + str(i)
data_hp = views.node(results, label_id)['sequences']
cost_Anlagen += (
data_hp[(('Elektrizitätsnetzwerk', label_id), 'flow')].sum() *
param['HP']['op_cost_var'] +
(param['HP']['op_cost_fix'] * data['P_max_hp'].max()))
labeldict[((label_id, 'Wärmenetzwerk'),
'flow')] = 'Q_ab_' + label_id
labeldict[(('Elektrizitätsnetzwerk', label_id),
'flow')] = 'P_zu_' + label_id
labeldict[(('Elektrizitätsnetzwerk', label_id),
'status')] = 'Status_' + label_id
if param['LT-HP']['active']:
for i in range(1, param['LT-HP']['amount'] + 1):
label_id = 'LT-HP_' + str(i)
data_lt_hp = views.node(results, label_id)['sequences']
invest_ges += (param['HP']['inv_spez'] * data_wnw[(
(label_id, 'Wärmenetzwerk'), 'flow')].max() /
data['cop_lthp'].mean())
cost_Anlagen += (data_lt_hp[(
('Elektrizitätsnetzwerk', label_id), 'flow')].sum() *
param['HP']['op_cost_var'] +
(param['HP']['op_cost_fix'] * data_wnw[(
(label_id, 'Wärmenetzwerk'), 'flow')].max() /
data['cop_lthp'].mean()))
labeldict[((label_id, 'Wärmenetzwerk'),
'flow')] = 'Q_ab_' + label_id
labeldict[(('Elektrizitätsnetzwerk', label_id),
'flow')] = 'P_zu_' + label_id
labeldict[(('LT-Wärmenetzwerk', label_id),
'flow')] = 'Q_zu_' + label_id
# Speicher
if param['TES']['active']:
invest_ges += (param['TES']['inv_spez'] * param['TES']['Q'] *
param['TES']['amount'])
for i in range(1, param['TES']['amount'] + 1):
label_id = 'TES_' + str(i)
data_tes = views.node(results, label_id)['sequences']
cost_Anlagen += (data_tes[(
('Wärmenetzwerk', label_id), 'flow')].sum() *
param['TES']['op_cost_var'] +
(param['TES']['op_cost_fix'] * param['TES']['Q']))
labeldict[((label_id, 'LT-Wärmenetzwerk'),
'flow')] = 'Q_ab_' + label_id
labeldict[((label_id, 'LT-Wärmenetzwerk'),
'status')] = 'Status_ab_' + label_id
labeldict[(('Wärmenetzwerk', label_id),
'flow')] = 'Q_zu_' + label_id
labeldict[(('Wärmenetzwerk', label_id),
'status')] = 'Status_zu_' + label_id
labeldict[((label_id, 'None'),
'storage_content')] = 'Speicherstand_' + label_id
# %% Zahlungsströme Ergebnis
objective = abs(es_ref.results['meta']['objective'])
# %% Geldflüsse
# # Primärenergiebezugskoste
cost_gas = (
data_gnw[(('Gasquelle', 'Gasnetzwerk'), 'flow')].sum() *
(param['param']['gas_price'] + param['param']['co2_certificate']))
el_flow = np.array(data_enw[(('Stromquelle', 'Elektrizitätsnetzwerk'),
'flow')])
cost_el_timeseries = np.array(data['el_price'])
cost_el_array = el_flow * cost_el_timeseries
cost_el = cost_el_array.sum()
# Erlöse
revenues_spotmarkt_timeseries = (np.array(data_enw[(
('Elektrizitätsnetzwerk', 'Spotmarkt'), 'flow')]) *
np.array(data['el_spot_price']))
revenues_spotmarkt = revenues_spotmarkt_timeseries.sum()
revenues_heatdemand = (data_wnw[(
('Wärmenetzwerk', 'Wärmebedarf'), 'flow')].sum() *
param['param']['heat_price'])
# Summe der Geldströme
Gesamtbetrag = (revenues_spotmarkt + revenues_heatdemand - cost_Anlagen -
cost_gas - cost_el)
# %% Output Ergebnisse
# Umbenennen der Spaltennamen der Ergebnisdataframes
result_dfs = [data_wnw, data_lt_wnw, data_tes, data_enw, data_gnw]
for df in result_dfs:
result_labelling(df)
# Daten zum Plotten der Wärmeversorgung
df1 = pd.concat([data_wnw, data_lt_wnw, data_tes, data_enw], axis=1)
df1.to_csv(path.join(dirpath, 'Ergebnisse\\Vorarbeit\\Vor_wnw.csv'),
sep=";")
# Daten zum Plotten der Investitionsrechnung
df2 = pd.DataFrame(
data={
'invest_ges': [invest_ges],
'Q_tes': [param['TES']['Q']],
'total_heat_demand': [total_heat_demand],
'Gesamtbetrag': [Gesamtbetrag]
})
df2.to_csv(path.join(dirpath, 'Ergebnisse\\Vorarbeit\\Vor_Invest.csv'),
sep=";")
# Daten für die ökologische Bewertung
df3 = pd.concat(
[data_gnw[['H_source']], data_enw[['P_spot_market', 'P_source']]],
axis=1)
df3.to_csv(path.join(dirpath, 'Ergebnisse\\Vorarbeit\\Vor_CO2.csv'),
sep=";")
es_ref.add(ehk, slk, bhkw)
# %% Speicher
# Saisonaler Speicher
tes = solph.components.GenericStorage(
label='Wärmespeicher',
nominal_storage_capacity=Q_tes,
inputs={
wnw:
solph.Flow(nominal_value=nom_heat_demand_local / 4,
max=1,
min=0.1,
variable_costs=op_cost_tes,
nonconvex=solph.NonConvex(minimum_uptime=3,
initial_status=0))
},
outputs={
wnw:
solph.Flow(nominal_value=nom_heat_demand_local / 4,
max=1,
min=0.1,
nonconvex=solph.NonConvex(minimum_uptime=3,
initial_status=0))
},
initial_storage_level=0.7,
inflow_conversion_factor=1,
outflow_conversion_factor=0.75)
es_ref.add(tes)
es = solph.EnergySystem(timeindex=time)
b_heat = solph.Bus(label='b_heat')
es.add(b_heat)
sink_heat = solph.Sink(
label='demand',
inputs={b_heat: solph.Flow(fix=demand_heat, nominal_value=1)})
fireplace = solph.Source(
label='fireplace',
outputs={b_heat: solph.Flow(nominal_value=3,
variable_costs=0,
nonconvex=solph.NonConvex(
activity_costs=activity_costs))})
boiler = solph.Source(
label='boiler',
outputs={b_heat: solph.Flow(nominal_value=10,
variable_costs=1)})
es.add(sink_heat, fireplace, boiler)
##########################################################################
# Optimise the energy system
##########################################################################
# create an optimization problem and solve it
om = solph.Model(es)
def ht_heat_pump(param, data, busses):
r"""
Get high temperature heat pump for Generic Model energy system.
Parameters
----------
param : dict
JSON parameter file of user defined constants.
data : pandas.DataFrame
csv file of user defined time dependent parameters.
busses : dict of solph.Bus
Busses of the energy system.
Note
----
High temperature heat pump uses the following parameters:
- 'active' is a binary parameter wether is used or not
- 'type' defines wether it is used constant or time dependent
- 'amount' is the amount of this components installed
- 'P_max' is the constant maximum output power in MW
- 'P_min' is the constant minimum output power in MW
- 'c_1' is the linear coefficicient 1 (slope)
- 'c_0' is the linear coefficicient 0 (y-intersection)
- 'P_max_hp' is the time series of maximum output power in MW
- 'P_min_hp' is the time series minimum output power in MW
- 'elec_consumer_charges_self' are the constant consumer charges for
internal electricity usage in €/MWh
- 'op_cost_var' are the variable operational costs in €/MWh
Topology
--------
Input: Electricity network (enw)
Output: High temperature heat network (wnw)
"""
if param['HP']['active']:
if param['HP']['type'] == 'constant':
for i in range(1, param['HP']['amount'] + 1):
ht_hp = solph.components.OffsetTransformer(
label='HP_' + str(i),
inputs={
busses['enw']:
solph.Flow(
nominal_value=param['HP']['P_max'],
max=1,
min=param['HP']['P_min'] / param['HP']['P_max'],
variable_costs=(
param['param']['elec_consumer_charges_self']),
nonconvex=solph.NonConvex())
},
outputs={
busses['wnw']:
solph.Flow(variable_costs=param['HP']['op_cost_var'])
},
coefficients=[param['HP']['c_0'], param['HP']['c_1']])
return ht_hp
elif param['HP']['type'] == 'time series':
for i in range(1, param['HP']['amount'] + 1):
ht_hp = solph.components.OffsetTransformer(
label='HP_' + str(i),
inputs={
busses['enw']:
solph.Flow(
nominal_value=1,
max=data['P_max_hp'],
min=data['P_min_hp'],
variable_costs=(
param['param']['elec_consumer_charges_self']),
nonconvex=solph.NonConvex())
},
outputs={
busses['wnw']:
solph.Flow(variable_costs=param['HP']['op_cost_var'])
},
coefficients=[data['c_0_hp'], data['c_1_hp']])
return ht_hp
else:
raise ComponentTypeError(param['HP']['type'], 'HP')
def short_term_thermal_energy_storage(param, busses):
r"""
Get short term thermal energy storage for Generic Model energy system.
Parameters
----------
param : dict
JSON parameter file of user defined constants.
busses : dict of solph.Bus
Busses of the energy system.
Note
----
Short term thermal energy storage uses the following parameters:
- 'active' is a binary parameter wether is used or not
- 'amount' is the amount of this components installed
- 'Q_N_in' is the constant nominal input value in MWh
- 'Q_N_out' is the constant nominal output value in MWh
- 'Q_rel_in_max' is a scaling factor for maximal heat input
- 'Q_rel_in_min' is a scaling factor for minimal heat input
- 'Q_rel_out_max' is a scaling factor for maximal heat output
- 'Q_rel_out_min' is a scaling factor for minimal heat output
- 'min_uptime' is the amount of time steps the storage has to be on during
operation
- 'init_status' is the value wheter the state of charge is active at the
beginning
- 'init_storage' is the start value of the state of charge
- 'balanced' is the condition whether the state of charge at the end of
the optimiziation period is the same as at the beginning
- 'Q_rel_loss' is the constant loss rate to environment
- 'inflow_conv' is the constant inflow conversion factor
- 'outflow_conv' is the constant outflow conversion factor
- 'op_cost_var' are the variable operational costs in €/MWh
Topology
--------
Input: High temperature heat network (wnw)
Output: High temperature heat network (wnw)
"""
if param['ST-TES']['active']:
for i in range(1, param['ST-TES']['amount'] + 1):
st_tes = solph.components.GenericStorage(
label='ST-TES_' + str(i),
nominal_storage_capacity=param['ST-TES']['Q'],
inputs={
busses['wnw']:
solph.Flow(storageflowlimit=True,
nominal_value=param['ST-TES']['Q_N_in'],
max=param['ST-TES']['Q_rel_in_max'],
min=param['ST-TES']['Q_rel_in_min'],
variable_costs=param['ST-TES']['op_cost_var'],
nonconvex=solph.NonConvex(initial_status=int(
param['ST-TES']['init_status'])))
},
outputs={
busses['wnw']:
solph.Flow(storageflowlimit=True,
nominal_value=param['ST-TES']['Q_N_out'],
max=param['ST-TES']['Q_rel_out_max'],
min=param['ST-TES']['Q_rel_out_min'],
nonconvex=solph.NonConvex())
},
initial_storage_level=param['ST-TES']['init_storage'],
loss_rate=param['ST-TES']['Q_rel_loss'],
inflow_conversion_factor=param['ST-TES']['inflow_conv'],
outflow_conversion_factor=param['ST-TES']['outflow_conv'])
return st_tes
actual_value=[
heat_demand(day)
for day in range(0, periods)
],
nominal_value=10)
})
fireplace = solph.Source(label='fireplace',
outputs={
b_heat:
solph.Flow(
nominal_value=10,
min=0.4,
max=1.0,
variable_costs=0.1,
nonconvex=solph.NonConvex(minimum_uptime=2,
initial_status=1))
})
boiler = solph.Source(
label='boiler',
outputs={b_heat: solph.Flow(nominal_value=10, variable_costs=0.2)})
# basic model for solar thermal yield, solely based on the day of the year
def solar_thermal(d):
return 0.5 - 0.5 * np.cos(2 * np.pi * d / 356)
# For one year, the equivalent periodical costs (epc) of an
# investment are equal to the annuity.
epc = economics.annuity(5000, 20, 0.05)
bel = solph.Bus(label='bel')
# There are a sink and a source, both creating a revenue (negative cost),
# so it would be optimal to use both at the same time. To suppress this,
# the constraint "limit_active_flow_count" is used.
# You might define any keyword (here "my_keyword") like:
# > Flow(nonconvex=solph.NonConvex(),
# > my_keyword=True,
# ...)
# But also any existing one (e.g. "emission_factor") can be used.
solph.Source(label='source1',
outputs={
bel:
solph.Flow(nonconvex=solph.NonConvex(),
nominal_value=210,
variable_costs=[-1, -5, -1, -1],
max=[1, 1, 1, 0],
my_keyword=True)
})
# Note: The keyword is also defined when set to False.
solph.Sink(label='sink1',
inputs={
bel:
solph.Flow(nonconvex=solph.NonConvex(),
variable_costs=[-2, -1, -2, -2],
nominal_value=250,
max=[1, 1, 1, 0],
my_keyword=False)
