def __init__(self):
# Template cut
self.win_len = 45 # cut window length
self.t_blank = 15 # time before P in the cut window
self.min_sta = 4 # min sta num for a template events
self.chn_dict = {'ZSY':['HHE','HHN','HHZ'],
'YN': ['HHE','HHN','HHZ'],
'XLS':['HHE','HHN','HHZ']}
self.get_data_dict = dps.Data(None).get_data_dict
# MFT params
self.temp_win_trig = [1., 9.] # win fr trig temp cut, rel p
self.temp_win_p = [0.5,1.5] # win for p temp cut, rel p
self.temp_win_s = [0, 2.] # win for s temp cut, rel s
self.trig_thres = 0.25 # cc thres for det & mask
self.mask_len = 1. # win len for cc mask
self.det_gap = 5. # gap sec for detection
self.ppk_win_p = [1., 1.] # win for p pick
self.ppk_win_s = [2., 2.] # win for s pick
# data process
self.resp_dict = {'ZSY': 3.02e8,
'YN': 1.67785e9,
'XLS': 1/1.6e-9} # instrumental gain (cnt/m/s)
self.samp_rate = 50
self.freq_band = ['bandpass', [1., 40.]]
self.picker = pickers.Trad_PS(self.samp_rate)
self.num_workers = 5
def __init__(self):
# 1. picker params
pick_win = [10., 1.] # pick win for STA/LTA
trig_thres = 15. # threshold to trig picker (by energy)
pick_thres = 0.96 # threshold for picking
p_win = [1., 1.] # win len for P picking
s_win = [0, 15.] # win len for S picking
pca_win = 1. # win len for PCA filter
pca_rng = [0, 2.5] # time range to apply PCA filter
fd_thres = 2.5 # min value of dominant frequency
amp_win = 5. # time win to get S amplitude
det_gap = 5. # time gap between detections
freq_band = ['highpass', 1] # frequency band for ppk
# 2. assoc params
ot_dev = 3. # time deviation for ot assoc
ttp_dev = 2. # time deviation for ttp assoc
assoc_num = 4 # num of stations to assoc
# 3. loc params
side_width = 0.2 # ratio of sides relative to sta range
xy_grid = 0.02 # lateral grid width, in degree
# sta info
sta_file = '/data2/ZSY_SAC/header/station_ZSY.dat'
resp_dict = {
'ZSY': 3.02e8,
'YN': 1.67785e9,
'XLS': 1 / 1.6e-9,
} # instrumental gain (cnt/m/s)
# 4. define func
dp = dps.Data(resp_dict)
self.get_data_dict = dp.get_data_dict
self.get_picks = dp.get_picks
self.read_data = dp.read_data
sta_dict = dp.get_sta_dict(sta_file)
self.picker = pickers.Trad_PS(\
trig_thres = trig_thres,
s_win = s_win)
self.associator = associators.TS_Assoc(\
sta_dict,
assoc_num = assoc_num,
ot_dev = ot_dev,
ttp_dev = ttp_dev)
def __init__(self):
# 1. picker params
self.pick_win = [10., 1.] # pick win for STA/LTA
self.trig_thres = 15. # threshold to trig picker (by energy)
self.pick_thres = 0.96 # threshold for picking
self.p_win = [1., 1.] # win len for P picking
self.s_win = [0, 15.] # win len for S picking
self.pca_win = 1. # # win len for PCA filter
self.pca_rng = [0, 2.5] # time range to apply PCA filter
self.fd_thres = 2.5 # min value of dominant frequency
self.amp_win = 5. # time win to get S amplitude
self.det_gap = 5. # time gap between detections
self.freq_band = ['highpass', 1] # frequency band for ppk
# 2. assoc params
self.ot_dev = 3. # time deviation for ot assoc
self.ttp_dev = 2. # time deviation for ttp assoc
self.assoc_num = 4 # num of stations to assoc
# 3. loc params
self.side_width = 0.2 # ratio of sides relative to sta range
self.xy_grid = 0.02 # lateral grid width, in degree
self.resp_dict = {
'ZSY': 3.02e8,
'YN': 1.67785e9,
'XLS': 1 / 1.6e-9,
'G70': 1 / 1.6e-9,
'G4Z': 1 / 1.6e-9,
'G4V': 1 / 1.6e-9,
'REF': 1 / 1.6e-9
} # instrumental response (cnt/m/s)
# 4. define func
self.get_data = dp.get_data
sta_dict = dp.get_sta('/data3/XLS_SAC/header/station_XLS.dat')
self.picker = pickers.Trad_PS(\
trig_thres = self.trig_thres,
s_win = self.s_win)
self.associator = associators.TS_Assoc(\
sta_dict, self.resp_dict,
assoc_num = self.assoc_num,
ot_dev = self.ot_dev,
ttp_dev = self.ttp_dev)
parser.add_argument('--out_pha',
type=str,
default='./output/zsy/aug_zsy.pha')
args = parser.parse_args()
# MFT params
cfg = config.Config()
decim_rate = cfg.decim_rate
freq_band = cfg.freq_band
samp_rate = 100. / decim_rate
win_trig = cfg.win_trig
win_p = cfg.win_p
win_s = cfg.win_s
trig_thres = cfg.trig_thres
mask_len = int(samp_rate * cfg.mask_len)
picker = pickers.Trad_PS()
# i/o file
out_ctlg = open(args.out_ctlg, 'w')
out_pha = open(args.out_pha, 'w')
temp_dict = get_temp_dict(args.temp_pha, args.temp_root)
# get time range
start_date = UTCDateTime(args.time_range.split(',')[0])
end_date = UTCDateTime(args.time_range.split(',')[1])
print('Run MFT (gpu version)')
print('time range: {} to {}'.format(start_date, end_date))
# for all days
num_day = (end_date.date - start_date.date).days
for day_idx in range(num_day):
def main(args):
# i/o file
if os.path.exists(args.out_ctlg):
os.unlink(args.out_ctlg)
os.unlink(args.out_pha)
out_ctlg = open(args.out_ctlg, 'a')
out_pha = open(args.out_pha, 'a')
sta_dict = data_pipeline.get_sta_dict(args.sta_file)
cfg = config.Config()
# define algorithm
picker = pickers.Trad_PS(trig_thres=cfg.trig_thres)
associator = associators.Simple_Assoc(assoc_num=cfg.assoc_num,
ot_dev=cfg.ot_dev)
locator = locators.Simple_Loc(sta_dict, cfg.resp_dict)
# get time range
start_date = UTCDateTime(args.time_range.split(',')[0])
end_date = UTCDateTime(args.time_range.split(',')[1])
print('Making catalog')
print('time range: {} to {}'.format(start_date, end_date))
# for all days
num_day = (end_date.date - start_date.date).days
for day_idx in range(num_day):
# get data paths
datetime = start_date + day_idx * 86400
data_dict = data_pipeline.get_xj(args.data_dir, datetime)
if data_dict == {}: continue
# 1. waveform --> phase picks
# pick all sta
for i, sta in enumerate(data_dict):
# read data
if len(data_dict[sta]) < 3: continue
stream = read(data_dict[sta][0])
stream += read(data_dict[sta][1])
stream += read(data_dict[sta][2])
# phase picking
picksi = picker.pick(stream)
if i == 0: picks = picksi
else: picks = np.append(picks, picksi)
# 2. associate: picks --> events
event_picks = associator.pick2event(picks)
# write pahse file
associator.write(event_picks, out_pha)
# 3. locate evnets
for event_pick in event_picks:
event_loc = locator.locate(event_pick)
# 4. estimate magnitude
event_loc_mag = locator.calc_mag(event_pick, event_loc)
# write catalog
locator.write(event_loc_mag, out_ctlg)
# finish making catalog
out_pha.close()
out_ctlg.close()
def main(args):
# i/o files
data_dir = args.data_dir
org_ctlg = args.org_ctlg
f = open(org_ctlg)
events = f.readlines()
f.close()
out_root = args.out_root
temp_root = os.path.join(out_root, args.temp_root)
if not os.path.exists(temp_root): os.makedirs(temp_root)
ctlg_path = os.path.join(out_root, args.out_ctlg)
pha_path = os.path.join(out_root, args.out_pha)
out_ctlg = open(ctlg_path, 'w')
out_pha = open(pha_path, 'w')
# make sta dir
sta_file = args.sta_file
sta_dict = dp.get_sta_dict(sta_file)
# params
cfg = config.Config()
max_dist = cfg.max_dist # km
win_len = cfg.win_len # sec
min_sta = cfg.min_sta # min number of sta
t_blank = cfg.t_blank # sec before tp (cut win)
dt_p = cfg.dt_s
dt_s = cfg.dt_s
p_thres = cfg.p_thres
s_thres = cfg.s_thres
fd_thres = cfg.fd_thres
picker = pickers.Trad_PS(trig_thres=p_thres, fd_thres=fd_thres)
# for all events
event_picks = []
for i, event in enumerate(events):
# event info
ot, lat, lon, dep, mag = event.split(',')
event_dir = os.path.join(temp_root, ot)
if not os.path.exists(event_dir): os.mkdir(event_dir)
ot = UTCDateTime(ot)
lat = float(lat)
lon = float(lon)
dep = float(dep)
data_dict = dp.get_xj(data_dir, ot)
event_picks.append([event, event_dir, []])
print('-' * 40)
print('checking {}th event'.format(i))
for sta in data_dict:
# select all stations
sta_line = sta_dict[sta_dict['station'] == sta]
sta_lat = float(sta_line['latitude'])
sta_lon = float(sta_line['longitude'])
sta_ele = float(sta_line['elevation'])
dist0 = 111 * np.sqrt((sta_lat - lat)**2 + (sta_lon - lon)**2)
if dist0 > max_dist: continue
# theoretical arrival time
dist1 = np.sqrt(dist0**2 + (dep + 2.5)**2)
ttp, tts = calc_tt(dist1) # travel time
tp0 = ot + ttp # arrival time
ts0 = ot + tts
b = tp0 - UTCDateTime(ot.date) - t_blank
# cut event
out_paths = []
for data in data_dict[sta]:
data = os.path.split(data)[-1]
net, chn = data.split('.')[0], data.split('.')[-2]
out_paths.append(
os.path.join(event_dir, '%s.%s.%s' % (net, sta, chn)))
if len(data_dict[sta]) != 3: continue
sac.cut(data_dict[sta][0], b, b + win_len, out_paths[0])
sac.cut(data_dict[sta][1], b, b + win_len, out_paths[1])
sac.cut(data_dict[sta][2], b, b + win_len, out_paths[2])
# read event data
st = read(out_paths[0])
st += read(out_paths[1])
st += read(out_paths[2])
# run picker
picks = picker.pick(st)
if len(picks) == 0:
for fname in out_paths:
os.unlink(fname)
continue
tp = picks['p_arr'][0]
ts = picks['s_arr'][-1]
p_snr = picks['p_snr'][0]
s_snr = picks['s_snr'][-1]
# write head
t0 = tp - tp0 + t_blank
t1 = ts - tp0 + t_blank
sac.ch_event(out_paths[0], lon, lat, dep, 1, [t0, t1])
sac.ch_event(out_paths[1], lon, lat, dep, 1, [t0, t1])
sac.ch_event(out_paths[2], lon, lat, dep, 1, [t0, t1])
# select
if s_snr>s_thres\
and abs(tp-tp0)<dt_p\
and abs(ts-ts0)<dt_s:
event_picks[-1][-1].append('{},{},{},{:.1f},{:.1f}\n'\
.format(sta, tp, ts, p_snr, s_snr))
else:
for fname in out_paths:
os.unlink(fname)
# select all event picks
for event_pick in event_picks:
print('select {}'.format(event_pick[0][:-1]))
event = event_pick[0]
event_dir = event_pick[1]
picks = event_pick[2]
if len(picks) < min_sta:
if os.path.exists(event_dir):
shutil.rmtree(event_dir)
continue
out_ctlg.write(event)
out_pha.write(event)
for pick in picks:
out_pha.write(pick)
out_ctlg.close()
out_pha.close()
