def _drawline(surface, c_color, start, end):
# Bresenham algorithm
x0, y0 = start
x1, y1 = end
dx = abs(x1 - x0)
dy = abs(y1 - y0)
sx = -1 if x0 > x1 else 1
sy = -1 if y0 > y1 else 1
err = dx - dy
while True:
surface._set_at(x0, y0, c_color)
if x0 == x1 and y0 == y1:
break
e2 = err * 2
if e2 > -dy:
err -= dy
x0 += sx
if x0 == x1 and y0 == y1:
surface._set_at(x0, y0, c_color)
break
if e2 < dx:
err += dx
y0 += sy
def _drawline(surface, c_color, start, end):
# Bresenham algorithm
x0, y0 = start
x1, y1 = end
dx = abs(x1 - x0)
dy = abs(y1 - y0)
sx = -1 if x0 > x1 else 1
sy = -1 if y0 > y1 else 1
err = dx - dy
while True:
surface._set_at(x0, y0, c_color)
if x0 == x1 and y0 == y1:
break
e2 = err * 2
if e2 > -dy:
err -= dy
x0 += sx
if x0 == x1 and y0 == y1:
surface._set_at(x0, y0, c_color)
break
if e2 < dx:
err += dx
y0 += sy
def _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
if radius_x == 0 and radius_y == 0:
with locked(surface._c_surface):
surface._set_at(c_x, c_y, c_color)
return True
elif radius_x == 0:
# vertical line
_drawvertline(surface, c_color, c_y - radius_y, c_y + radius_y, c_x)
return True
elif radius_y == 0:
_drawhorizline(surface, c_color, c_x - radius_x, c_x + radius_x, c_y)
return True
return False
def _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
if radius_x == 0 and radius_y == 0:
with locked(surface._c_surface):
surface._set_at(c_x, c_y, c_color)
return True
elif radius_x == 0:
# vertical line
_drawvertline(surface, c_color, c_y - radius_y, c_y + radius_y, c_x)
return True
elif radius_y == 0:
_drawhorizline(surface, c_color, c_x - radius_x, c_x + radius_x, c_y)
return True
return False
def _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
if radius_x == 0 and radius_y == 0:
clip = surface.get_clip()
# Throw away points outside the clip area
if c_x < clip.x or c_x >= (clip.x + clip.w):
return True
if c_y < clip.y or c_y >= (clip.y + clip.h):
return True
with locked(surface._c_surface):
surface._set_at(c_x, c_y, c_color)
return True
elif radius_x == 0:
# vertical line
_drawvertline(surface, c_color, c_y - radius_y, c_y + radius_y, c_x)
return True
elif radius_y == 0:
_drawhorizline(surface, c_color, c_x - radius_x, c_x + radius_x, c_y)
return True
return False
def _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
if radius_x == 0 and radius_y == 0:
clip = surface.get_clip()
# Throw away points outside the clip area
if c_x < clip.x or c_x > (clip.x + clip.w):
return True
if c_y < clip.y or c_y > (clip.y + clip.h):
return True
with locked(surface._c_surface):
surface._set_at(c_x, c_y, c_color)
return True
elif radius_x == 0:
# vertical line
_drawvertline(surface, c_color, c_y - radius_y, c_y + radius_y, c_x)
return True
elif radius_y == 0:
_drawhorizline(surface, c_color, c_x - radius_x, c_x + radius_x, c_y)
return True
return False
def _drawline(surface, c_color, start, end):
# Bresenham algorithm (more or less as approximated by pygame)
x0, y0 = start
x1, y1 = end
if x0 == x1:
_drawvertline(surface, c_color, y0, y1, x0)
return
if y0 == y1:
_drawhorizline(surface, c_color, x0, x1, y0)
return
# Because of how we approximate pygame's pointer
# arthimetic, we don't handle the ends of the lines
# the same way - this fakes it
surface._set_at(x0, y0, c_color)
surface._set_at(x1, y1, c_color)
steep = False
if abs(y1 - y0) > abs(x1 - x0):
steep = True
x0, y0 = y0, x0
x1, y1 = y1, x1
dx = abs(x1 - x0) + 1
dy = abs(y1 - y0) + 1
ystep = 1 if y0 < y1 else -1
xstep = 1 if x0 < x1 else -1
y = y0
error = 0
for x in range(x0, x1, xstep):
if steep:
surface._set_at(y, x, c_color)
else:
surface._set_at(x, y, c_color)
error = error + dy
if error >= dx:
y += ystep
error -= dx
def _drawline(surface, c_color, start, end):
# Bresenham algorithm (more or less as approximated by pygame)
x0, y0 = start
x1, y1 = end
if x0 == x1:
_drawvertline(surface, c_color, y0, y1, x0)
return
if y0 == y1:
_drawhorizline(surface, c_color, x0, x1, y0)
return
# Because of how we approximate pygame's pointer
# arthimetic, we don't handle the ends of the lines
# the same way - this fakes it
surface._set_at(x0, y0, c_color)
surface._set_at(x1, y1, c_color)
steep = False
if abs(y1 - y0) > abs(x1 - x0):
steep = True
x0, y0 = y0, x0
x1, y1 = y1, x1
dx = abs(x1 - x0) + 1
dy = abs(y1 - y0) + 1
ystep = 1 if y0 < y1 else -1
xstep = 1 if x0 < x1 else -1
y = y0
error = 0
for x in range(x0, x1, xstep):
if steep:
surface._set_at(y, x, c_color)
else:
surface._set_at(x, y, c_color)
error = error + dy
if error >= dx:
y += ystep
error -= dx
def _ellipse(surface, pos, radius_x, radius_y, color):
"""Internal helper function
draw a ellipse with line thickness 1 on surface."""
c_surf = surface._c_surface
c_x, c_y = pos
c_color = create_color(color, surface._format)
if _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
return
# Draw the ellipse
# Pygame's ellipse drawing algorithm appears to come from allegro, via sge
# and SDL_gfxPrimitives. It's known to be non-optimal, but we're aiming
# for pygame compatibility, so we're doing the same thing, much as
# it grates me to do so.
# We assume suitable diligence in terms of the licensing, but allegro's
# zlib'ish license should mean we're OK anyway.
stop_h = stop_i = stop_j = stop_k = -1
bounds = surface.get_bounding_rect()
with locked(c_surf):
i = 1
h = 0
if radius_x > radius_y:
ix = 0
iy = radius_x * 64
while i > h:
h = (ix + 16) // 64
i = (iy + 16) // 64
j = (h * radius_y) // radius_x
k = (i * radius_y) // radius_x
if (stop_k != k
and stop_j != k) or (stop_j != j
and stop_k != k) or (k != j):
plus_x = c_x + h - 1
minus_x = c_x - h
if k > 0:
plus_y = c_y + k - 1
minus_y = c_y - k
if h > 0:
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
stop_k = k
plus_x = c_x + i - 1
minus_x = c_x - i
if j > 0:
plus_y = c_y + j - 1
minus_y = c_y - j
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
stop_j = j
ix = ix + _c_div(iy, radius_x)
iy = iy - _c_div(ix, radius_x)
else:
ix = 0
iy = radius_y * 64
while i > h:
h = (ix + 32) // 64
i = (iy + 32) // 64
j = (h * radius_x) // radius_y
k = (i * radius_x) // radius_y
if (stop_i != i
and stop_h != i) or (stop_i != h
and stop_h != h) or (h != i):
plus_x = c_x + j - 1
minus_x = c_x - j
if i > 0:
plus_y = c_y + i - 1
minus_y = c_y - i
if j > 0:
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
stop_i = i
plus_x = c_x + k - 1
minus_x = c_x - k
if h > 0:
plus_y = c_y + h - 1
minus_y = c_y - h
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
stop_h = h
ix = ix + _c_div(iy, radius_y)
iy = iy - _c_div(ix, radius_y)
def _ellipse(surface, pos, radius_x, radius_y, color):
"""Internal helper function
draw a ellipse with line thickness 1 on surface."""
c_surf = surface._c_surface
c_x, c_y = pos
c_color = create_color(color, surface._format)
if _check_special_ellipse(surface, c_x, c_y, radius_x, radius_y, c_color):
return
# Draw the ellipse
# Pygame's ellipse drawing algorithm appears to come from allegro, via sge
# and SDL_gfxPrimitives. It's known to be non-optimal, but we're aiming
# for pygame compatibility, so we're doing the same thing, much as
# it grates me to do so.
# We assume suitable diligence in terms of the licensing, but allegro's
# zlib'ish license should mean we're OK anyway.
stop_h = stop_i = stop_j = stop_k = -1
bounds = surface.get_bounding_rect()
with locked(c_surf):
i = 1
h = 0
if radius_x > radius_y:
ix = 0
iy = radius_x * 64
while i > h:
h = (ix + 16) // 64
i = (iy + 16) // 64
j = (h * radius_y) // radius_x
k = (i * radius_y) // radius_x
if (stop_k != k and stop_j != k) or (stop_j != j and stop_k != k) or (k != j):
plus_x = c_x + h - 1
minus_x = c_x - h
if k > 0:
plus_y = c_y + k - 1
minus_y = c_y - k
if h > 0:
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
stop_k = k
plus_x = c_x + i - 1
minus_x = c_x - i
if j > 0:
plus_y = c_y + j - 1
minus_y = c_y - j
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
stop_j = j
ix = ix + _c_div(iy, radius_x)
iy = iy - _c_div(ix, radius_x)
else:
ix = 0
iy = radius_y * 64
while i > h:
h = (ix + 32) // 64
i = (iy + 32) // 64
j = (h * radius_x) // radius_y
k = (i * radius_x) // radius_y
if (stop_i != i and stop_h != i) or (stop_i != h and stop_h != h) or (h != i):
plus_x = c_x + j - 1
minus_x = c_x - j
if i > 0:
plus_y = c_y + i - 1
minus_y = c_y - i
if j > 0:
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
stop_i = i
plus_x = c_x + k - 1
minus_x = c_x - k
if h > 0:
plus_y = c_y + h - 1
minus_y = c_y - h
if bounds.collidepoint(plus_x, plus_y):
surface._set_at(plus_x, plus_y, c_color)
if bounds.collidepoint(plus_x, minus_y):
surface._set_at(plus_x, minus_y, c_color)
if bounds.collidepoint(minus_x, plus_y):
surface._set_at(minus_x, plus_y, c_color)
if bounds.collidepoint(minus_x, minus_y):
surface._set_at(minus_x, minus_y, c_color)
stop_h = h
ix = ix + _c_div(iy, radius_y)
iy = iy - _c_div(ix, radius_y)
