# link the interaction and the dynamical system impactingBar.link(inter,bar); # ------------------ # --- Simulation --- # ------------------ # -- (1) OneStepIntegrators -- OSI = MoreauJeanOSI(theta,0.5) # -- (2) Time discretisation -- t = TimeDiscretisation(t0,h) # -- (3) one step non smooth problem osnspb = LCP() s = TimeStepping(impactingBar, t,OSI,osnspb) k =0 N = int((T-t0)/h) dataPlot = np.zeros((N+1, 5)) q = bar.q() v = bar.velocity() p = bar.p(1) lambda_ = inter.lambda_(1) # time loop while s.hasNextEvent():
def test_bouncing_ball1():
from siconos.kernel import LagrangianLinearTIDS, NewtonImpactNSL, \
LagrangianLinearTIR, Interaction, Model, MoreauJeanOSI, TimeDiscretisation, LCP, TimeStepping
from numpy import array, eye, empty
t0 = 0 # start time
T = 10 # end time
h = 0.005 # time step
r = 0.1 # ball radius
g = 9.81 # gravity
m = 1 # ball mass
e = 0.9 # restitution coeficient
theta = 0.5 # theta scheme
#
# dynamical system
#
x = array([1, 0, 0]) # initial position
v = array([0, 0, 0]) # initial velocity
mass = eye(3) # mass matrix
mass[2, 2] = 3./5 * r * r
# the dynamical system
ball = LagrangianLinearTIDS(x, v, mass)
# set external forces
weight = array([-m * g, 0, 0])
ball.setFExtPtr(weight)
#
# Interactions
#
# ball-floor
H = array([[1, 0, 0]])
nslaw = NewtonImpactNSL(e)
relation = LagrangianLinearTIR(H)
inter = Interaction(1, nslaw, relation)
#
# Model
#
bouncingBall = Model(t0, T)
# add the dynamical system to the non smooth dynamical system
bouncingBall.nonSmoothDynamicalSystem().insertDynamicalSystem(ball)
# link the interaction and the dynamical system
bouncingBall.nonSmoothDynamicalSystem().link(inter, ball)
#
# Simulation
#
# (1) OneStepIntegrators
OSI = MoreauJeanOSI(theta)
OSI.insertDynamicalSystem(ball)
# (2) Time discretisation --
t = TimeDiscretisation(t0, h)
# (3) one step non smooth problem
osnspb = LCP()
# (4) Simulation setup with (1) (2) (3)
s = TimeStepping(t)
s.insertIntegrator(OSI)
s.insertNonSmoothProblem(osnspb)
# end of model definition
#
# computation
#
# simulation initialization
bouncingBall.initialize(s)
#
# save and load data from xml and .dat
#
try:
from siconos.io import save
save(bouncingBall, "bouncingBall.xml")
save(bouncingBall, "bouncingBall.bin")
except:
print("Warning : could not import save from siconos.io")
# the number of time steps
N = (T-t0)/h+1
# Get the values to be plotted
# ->saved in a matrix dataPlot
dataPlot = empty((N, 5))
#
# numpy pointers on dense Siconos vectors
#
q = ball.q()
v = ball.velocity()
p = ball.p(1)
lambda_ = inter.lambda_(1)
#
# initial data
#
dataPlot[0, 0] = t0
dataPlot[0, 1] = q[0]
dataPlot[0, 2] = v[0]
dataPlot[0, 3] = p[0]
dataPlot[0, 4] = lambda_[0]
k = 1
# time loop
while(s.hasNextEvent()):
s.computeOneStep()
dataPlot[k, 0] = s.nextTime()
dataPlot[k, 1] = q[0]
dataPlot[k, 2] = v[0]
dataPlot[k, 3] = p[0]
dataPlot[k, 4] = lambda_[0]
k += 1
#print(s.nextTime())
s.nextStep()
#
# comparison with the reference file
#
from siconos.kernel import SimpleMatrix, getMatrix
from numpy.linalg import norm
ref = getMatrix(SimpleMatrix(os.path.join(working_dir, "data/result.ref")))
assert (norm(dataPlot - ref) < 1e-12)
# # Simulation # # (1) OneStepIntegrators theta = 0.5 gamma = 0.5 aOSI = EulerMoreauOSI(theta, gamma) aOSI.insertDynamicalSystem(LSDiodeBridge) #aOSI.setUseGammaForRelation(True) # (2) Time discretisation aTiDisc = TimeDiscretisation(t0, h_step) # (3) Non smooth problem aLCP = LCP() # (4) Simulation setup with (1) (2) (3) aTS = TimeStepping(aTiDisc, aOSI, aLCP) # end of model definition # # computation # # simulation initialization DiodeBridge.initialize(aTS) k = 0 h = aTS.timeStep()
def test_diode_bridge():
"""Build diode bridge model"""
# dynamical system
bridge_ds = FirstOrderLinearDS(init_state, A)
# interaction
diode_bridge_relation = FirstOrderLinearTIR(C, B)
diode_bridge_relation.setDPtr(D)
nslaw = ComplementarityConditionNSL(4)
bridge_interaction = Interaction(4, nslaw, diode_bridge_relation, 1)
# Model
diode_bridge = Model(t0, total_time, model_title)
# add the dynamical system in the non smooth dynamical system
diode_bridge.nonSmoothDynamicalSystem().insertDynamicalSystem(bridge_ds)
# link the interaction and the dynamical system
diode_bridge.nonSmoothDynamicalSystem().link(bridge_interaction, bridge_ds)
# Simulation
# (1) OneStepIntegrators
theta = 0.5
integrator = EulerMoreauOSI(theta)
integrator.insertDynamicalSystem(bridge_ds)
# (2) Time discretisation
time_discretisation = TimeDiscretisation(t0, time_step)
# (3) Non smooth problem
non_smooth_problem = LCP()
# (4) Simulation setup with (1) (2) (3)
bridge_simulation = TimeStepping(time_discretisation, integrator,
non_smooth_problem)
# simulation initialization
diode_bridge.initialize(bridge_simulation)
k = 0
h = bridge_simulation.timeStep()
# Number of time steps
N = (total_time - t0) / h
# Get the values to be plotted
# ->saved in a matrix dataPlot
data_plot = empty([N, 8])
x = bridge_ds.x()
print("Initial state : ", x)
y = bridge_interaction.y(0)
print("First y : ", y)
lambda_ = bridge_interaction.lambda_(0)
# For the initial time step:
# time
data_plot[k, 0] = t0
# inductor voltage
data_plot[k, 1] = x[0]
# inductor current
data_plot[k, 2] = x[1]
# diode R1 current
data_plot[k, 3] = y[0]
# diode R1 voltage
data_plot[k, 4] = -lambda_[0]
# diode F2 voltage
data_plot[k, 5] = -lambda_[1]
# diode F1 current
data_plot[k, 6] = lambda_[2]
# resistor current
data_plot[k, 7] = y[0] + lambda_[2]
k += 1
while k < N:
bridge_simulation.computeOneStep()
#non_smooth_problem.display()
data_plot[k, 0] = bridge_simulation.nextTime()
# inductor voltage
data_plot[k, 1] = x[0]
# inductor current
data_plot[k, 2] = x[1]
# diode R1 current
data_plot[k, 3] = y[0]
# diode R1 voltage
data_plot[k, 4] = -lambda_[0]
# diode F2 voltage
data_plot[k, 5] = -lambda_[1]
# diode F1 current
data_plot[k, 6] = lambda_[2]
# resistor current
data_plot[k, 7] = y[0] + lambda_[2]
k += 1
bridge_simulation.nextStep()
#
# comparison with the reference file
#
ref = getMatrix(
SimpleMatrix(os.path.join(working_dir, "data/diode_bridge.ref")))
assert norm(data_plot - ref) < 1e-12
return ref, data_plot