def usb_test():
# print "Starting USB test"
for x in range(1, 51):
ip_to_ping = "192.168.0." + str(x + 100)
if (check_connectivity(ip_to_ping) == True):
mount_usb = "adb -s alt" + str(
x
) + ":4321 shell mount -t vfat /dev/block/sda1 /mnt/sdcard > /dev/null"
connect_alt = "adb connect alt" + str(x) + ":4321 > /dev/null"
alt_root = "adb -s alt" + str(x) + ":4321 root > /dev/null"
os.system(connect_alt)
time.sleep(2)
os.system(alt_root)
time.sleep(2)
os.system(connect_alt)
time.sleep(2)
os.system(mount_usb)
time.sleep(2)
mount_sp = subprocess.Popen([
'adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'mount', '-t',
'vfat', '/dev/block/sda1', '/mnt/sdcard'
],
stdout=subprocess.PIPE)
output = mount_sp.communicate()[0]
if not "busy" in output:
print "Failed to mount USB drive on ALT%d at %s" % (
x, str(datetime.now()))
thermal_chamber.status()
def temp_test():
# print "Starting Core Temp test"
for x in range(1,51):
ip_to_ping="192.168.0."+str(x+100)
if(check_connectivity(ip_to_ping) == True):
get_temp = subprocess.Popen(['adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'cat', '/sys/devices/platform/omap/omap_temp_sensor.0/temp1_input'], stdout=subprocess.PIPE)
output = get_temp.communicate()[0]
output = int(output)
if output > 95000:
print "Core temperature is %d on ALT%d at %s" % (output/1000, x, str(datetime.now()))
thermal_chamber.status()
def wifi_test():
# print "Starting Wifi test"
for x in range(1,51):
ip_to_ping="192.168.0."+str(x+100)
if(check_connectivity(ip_to_ping) == True):
scan = "adb -s alt" + str(x) + ':4321 shell "wpa_cli scan" > /dev/null'
os.system(scan)
time.sleep(3)
scan_res = subprocess.Popen(['adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'wpa_cli', 'scan_results'], stdout=subprocess.PIPE)
output = scan_res.communicate()[0]
# print output
if not "GoogleGuest" in output:
print "Wifi issues on ALT%d at %s" % (x, str(datetime.now()))
thermal_chamber.status()
def temp_test():
# print "Starting Core Temp test"
for x in range(1, 51):
ip_to_ping = "192.168.0." + str(x + 100)
if (check_connectivity(ip_to_ping) == True):
get_temp = subprocess.Popen([
'adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'cat',
'/sys/devices/platform/omap/omap_temp_sensor.0/temp1_input'
],
stdout=subprocess.PIPE)
output = get_temp.communicate()[0]
output = int(output)
if output > 95000:
print "Core temperature is %d on ALT%d at %s" % (
output / 1000, x, str(datetime.now()))
thermal_chamber.status()
def wifi_test():
# print "Starting Wifi test"
for x in range(1, 51):
ip_to_ping = "192.168.0." + str(x + 100)
if (check_connectivity(ip_to_ping) == True):
scan = "adb -s alt" + str(
x) + ':4321 shell "wpa_cli scan" > /dev/null'
os.system(scan)
time.sleep(3)
scan_res = subprocess.Popen([
'adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'wpa_cli',
'scan_results'
],
stdout=subprocess.PIPE)
output = scan_res.communicate()[0]
# print output
if not "GoogleGuest" in output:
print "Wifi issues on ALT%d at %s" % (x, str(datetime.now()))
thermal_chamber.status()
def usb_test():
# print "Starting USB test"
for x in range(1,51):
ip_to_ping="192.168.0."+str(x+100)
if(check_connectivity(ip_to_ping) == True):
mount_usb = "adb -s alt" + str(x) + ":4321 shell mount -t vfat /dev/block/sda1 /mnt/sdcard > /dev/null"
connect_alt = "adb connect alt" + str(x) + ":4321 > /dev/null"
alt_root = "adb -s alt" + str(x) + ":4321 root > /dev/null"
os.system(connect_alt)
time.sleep(2)
os.system(alt_root)
time.sleep(2)
os.system(connect_alt)
time.sleep(2)
os.system(mount_usb)
time.sleep(2)
mount_sp = subprocess.Popen(['adb', '-s', 'alt' + str(x) + ':4321', 'shell', 'mount', '-t', 'vfat', '/dev/block/sda1', '/mnt/sdcard'], stdout=subprocess.PIPE)
output = mount_sp.communicate()[0]
if not "busy" in output:
print "Failed to mount USB drive on ALT%d at %s" % (x, str(datetime.now()))
thermal_chamber.status()
cycles = 4
#while True:
for x in range(1, 4):
# Start a timer so that we get an accurate loop time
start = time.time()
# Setup elapsed timer
elapsed = 0
# Increment iteration
count += 1
# Notify of iteration count
print "Starting iteration %d at %s" % (count, str(datetime.now()))
thermal_chamber.status()
# Start power supply
print "Units powered on at %s" % str(datetime.now())
wrly = urllib.urlopen(BASE_STATE_URL + "1")
# Sleep for 2 minutes to let everyone come up
time.sleep(120)
# Start dhrystone on ALT units
dhrystone_start()
# Start HDMI tests
#print "Starting HDMI test"
hdmi_sw_matrix.hdmi_test()
cycles = 4
#while True:
for x in range(1,4):
# Start a timer so that we get an accurate loop time
start = time.time()
# Setup elapsed timer
elapsed = 0
# Increment iteration
count += 1
# Notify of iteration count
print "Starting iteration %d at %s" % (count, str(datetime.now()))
thermal_chamber.status()
# Start power supply
print "Units powered on at %s" % str(datetime.now())
wrly = urllib.urlopen(BASE_STATE_URL + "1")
# Sleep for 2 minutes to let everyone come up
time.sleep(120)
# Start dhrystone on ALT units
dhrystone_start()
# Start HDMI tests
#print "Starting HDMI test"
hdmi_sw_matrix.hdmi_test()