def init_device(self):
self.debug_stream("In init_device() of axis")
self.get_device_properties(self.get_device_class())
# -v1
self.info_stream("INFO STREAM ON ++++++++++++++++++++++++++")
self.warn_stream("WARN STREAM ON ++++++++++++++++++++++++++")
self.error_stream("ERROR STREAM ON ++++++++++++++++++++++++++")
self.fatal_stream("FATAL STREAM ON ++++++++++++++++++++++++++")
# -v3 (-v == -v4)
self.debug_stream("DEBUG STREAM ON ++++++++++++++++++++++++++")
try:
self.axis = TgGevent.get_proxy(bliss.get_axis, self._axis_name)
self.kontroler = TgGevent.get_proxy(self.axis.controller)
except:
elog.error("unable to get kontroller or axis")
self.set_status(traceback.format_exc())
self.debug_stream("axis found : %s" % self._axis_name)
self.once = False
self._init_time = time.time()
self._t = time.time()
self.attr_Home_position_read = 0.0
self.attr_StepSize_read = 0.0
self.attr_Steps_per_unit_read = 0.0
self.attr_Acceleration_read = 1.0
self.attr_HardLimitLow_read = False
self.attr_HardLimitHigh_read = False
self.attr_Backlash_read = 0.0
self.attr_Offset_read = 0.0
self.attr_Tolerance_read = 0.0
self.attr_PresetPosition_read = 0.0
self.attr_FirstVelocity_read = 0.0
"""
self.attr_Steps_read = 0
self.attr_Position_read = 0.0
self.attr_Measured_Position_read = 0.0
self.attr_Home_side_read = False
"""
self.attr_trajpar_read = [[0.0]]
# To force update of state and status.
self.dev_state()
# elog.info(" %s" % self.axis.get_info())
elog.info(" BlissAxisManager.py Axis " + bcolors.PINK + self._ds_name + bcolors.ENDC + " initialized")
def test_axis_move(self):
robz = TgGevent.get_proxy(emotion.get_axis, "robz")
self.assertEqual(robz.state(), "READY")
robz.move(180, wait=False)
self.assertEqual(robz.state(), "MOVING")
robz.wait_move()
self.assertEqual(robz.state(), "READY")
def test_stop(self):
robz = TgGevent.get_proxy(bliss.get_axis, "robz")
self.assertEqual(robz.state(), "READY")
robz.move(180, wait=False)
self.assertEqual(robz.state(), "MOVING")
robz.stop()
self.assertEqual(robz.state(), "READY")
def init_device(self) :
self.set_state(tango.DevState.ON)
self.get_device_properties(self.get_device_class())
self._nanodac = TgGevent.get_proxy(nanodac.nanodac,'server',{"controller_ip":self.controller_ip})
self._ramp1 = TgGevent.get_proxy(self._nanodac.get_soft_ramp,1)
self._ramp2 = TgGevent.get_proxy(self._nanodac.get_soft_ramp,2)
self._c1 = TgGevent.get_proxy(self._nanodac.get_channel,1)
self._c2 = TgGevent.get_proxy(self._nanodac.get_channel,2)
self._c3 = TgGevent.get_proxy(self._nanodac.get_channel,3)
self._c4 = TgGevent.get_proxy(self._nanodac.get_channel,4)
def init_device(self):
self.set_state(tango.DevState.ON)
self.get_device_properties(self.get_device_class())
self._nanodac = TgGevent.get_proxy(
nanodac.nanodac, 'server', {"controller_ip": self.controller_ip})
self._ramp1 = TgGevent.get_proxy(self._nanodac.get_soft_ramp, 1)
self._ramp2 = TgGevent.get_proxy(self._nanodac.get_soft_ramp, 2)
self._c1 = TgGevent.get_proxy(self._nanodac.get_channel, 1)
self._c2 = TgGevent.get_proxy(self._nanodac.get_channel, 2)
self._c3 = TgGevent.get_proxy(self._nanodac.get_channel, 3)
self._c4 = TgGevent.get_proxy(self._nanodac.get_channel, 4)
def __getattr__(self,name):
if name.startswith('read_') or name.startswith('write_') :
try:
_,mod_name,attr_name = name.split('_')
mod = getattr(self,'_%s' % mod_name)
except ValueError:
_,main_mod_name,mod_name,attr_name = name.split('_')
main_mod = getattr(self,'_%s' % main_mod_name)
main_mod = main_mod.get_base_obj()
mod = TgGevent.get_proxy(getattr,main_mod,mod_name)
if name.startswith('read_'):
func = _CallableRead(mod,attr_name)
else:
func = _CallableWrite(mod,attr_name)
self.__dict__[name] = func
return func
raise AttributeError("Nanodac has no attribute %s" % name)
def __getattr__(self, name):
if name.startswith('read_') or name.startswith('write_'):
try:
_, mod_name, attr_name = name.split('_')
mod = getattr(self, '_%s' % mod_name)
except ValueError:
_, main_mod_name, mod_name, attr_name = name.split('_')
main_mod = getattr(self, '_%s' % main_mod_name)
main_mod = main_mod.get_base_obj()
mod = TgGevent.get_proxy(getattr, main_mod, mod_name)
if name.startswith('read_'):
func = _CallableRead(mod, attr_name)
else:
func = _CallableWrite(mod, attr_name)
self.__dict__[name] = func
return func
raise AttributeError("Nanodac has no attribute %s" % name)
def main():
try:
delete_unused_bliss_axes()
except:
elog.error(
"Cannot delete unused bliss axes.",
raise_exception=False)
try:
py = PyTango.Util(sys.argv)
log_param = [param for param in sys.argv if "-v" in param]
if log_param:
log_param = log_param[0]
# print "-vN log flag found len=%d" % len(log_param)
if len(log_param) > 2:
tango_log_level = int(log_param[2:])
elif len(log_param) > 1:
tango_log_level = 4
else:
print "BlissAxisManager.py - ERROR LOG LEVEL"
if tango_log_level == 1:
elog.level(40)
elif tango_log_level == 2:
elog.level(30)
elif tango_log_level == 3:
elog.level(20)
else:
elog.level(10)
else:
# by default : show INFO
elog.level(20)
tango_log_level = 0
print ""
# elog.info("tango log level=%d" % tango_log_level)
# elog.debug("BlissAxisManager.py debug message")
# elog.error("BlissAxisManager.py error message", raise_exception=False)
# Searches for bliss devices defined in tango database.
U = PyTango.Util.instance()
db = U.get_database()
device_list = get_devices_from_server().get('BlissAxisManager')
if device_list is not None:
_device = device_list[0]
elog.info(" BlissAxisManager.py - BlissAxisManager device : %s" % _device)
try:
_config_file = db.get_device_property(_device, "config_file")["config_file"][0]
except:
elog.info(" BlissAxisManager.py - 'config_file' property not present ?")
_config_file = None
first_run = False
else:
elog.error("[FIRST RUN] New server never started ? -> no database entry...", raise_exception=False)
elog.error("[FIRST RUN] NO CUSTOM COMANDS :( ", raise_exception=False)
elog.error("[FIRST RUN] Restart DS to havec CUSTOM COMMANDS", raise_exception=False)
first_run = True
py.add_class(BlissAxisManagerClass, BlissAxisManager)
# py.add_class(BlissAxisClass, BlissAxis)
if not first_run:
if _config_file is not None:
elog.info(" BlissAxisManager.py - config file : " + bcolors.PINK + _config_file + bcolors.ENDC)
try:
TgGevent.execute(bliss.load_cfg, _config_file)
except:
elog.error("error (not present or syntax error?) in reading config file : %s" %
_config_file, raise_exception=False)
sys.excepthook(*sys.exc_info())
sys.exit(-1)
else:
# Get axis names defined in config file.
axis_names = bliss_config.axis_names_list()
else:
elog.info(" BlissAxisManager.py - " + bcolors.PINK + "beacon config" + bcolors.ENDC)
# Get axes names from property (= use beacon to get axis objects)
bliss_config.BACKEND = "beacon"
axis_names = db.get_device_property(_device, "axes")["axes"][0].split()
elog.debug("axis names list : %s" % axis_names)
for axis_name in axis_names:
elog.debug("BlissAxisManager.py : _____________ axis %s _____________" % axis_name)
try:
_axis = TgGevent.get_proxy(bliss.get_axis, axis_name)
except ConnectionException:
elog.error("beacon_server seems not running")
sys.exit(-1)
except:
print traceback.format_exc()
sys.exit(-1)
new_axis_class_class = types.ClassType("BlissAxisClass_%s" % axis_name, (BlissAxisClass,), {})
new_axis_class = types.ClassType("BlissAxis_%s" % axis_name, (BlissAxis,), {})
types_conv_tab = {
None: PyTango.DevVoid,
str: PyTango.DevString,
int: PyTango.DevLong,
float: PyTango.DevDouble,
bool: PyTango.DevBoolean,
"str": PyTango.DevString,
"int": PyTango.DevLong,
"float": PyTango.DevDouble,
"bool": PyTango.DevBoolean,
"None": PyTango.DevVoid,
"float_array": PyTango.DevVarFloatArray,
"double_array": PyTango.DevVarDoubleArray,
"long_array": PyTango.DevVarLongArray,
"string_array": PyTango.DevVarStringArray
}
"""
CUSTOM COMMANDS
"""
# Search and adds custom commands.
_cmd_list = _axis.custom_methods_list()
elog.debug("'%s' custom commands:" % axis_name)
new_axis_class_class.cmd_list = dict(BlissAxisClass.cmd_list)
for (fname, (t1, t2)) in _cmd_list:
setattr(new_axis_class, fname, getattr(_axis, fname))
tin = types_conv_tab[t1]
tout = types_conv_tab[t2]
new_axis_class_class.cmd_list.update({fname: [[tin, ""], [tout, ""]]})
elog.debug(" %s (in: %s, %s) (out: %s, %s)" % (fname, t1, tin, t2, tout))
"""
CUSTOM SETTINGS AS ATTRIBUTES.
"""
elog.debug(" BlissAxisManager.py : %s : -------------- SETTINGS -----------------" % axis_name)
new_axis_class_class.attr_list = dict(BlissAxisClass.attr_list)
for setting_name in _axis.settings():
if setting_name in ["velocity", "position", "dial_position", "state",
"offset", "low_limit", "high_limit", "acceleration", "_set_position"]:
elog.debug(" BlissAxisManager.py -- std SETTING %s " % (setting_name))
else:
_attr_name = setting_name
_setting_type = _axis.controller().axis_settings.convert_funcs[_attr_name]
_attr_type = types_conv_tab[_setting_type]
elog.debug(" BlissAxisManager.py -- adds SETTING %s as %s attribute" % (setting_name, _attr_type))
# Updates Attributes list.
new_axis_class_class.attr_list.update({_attr_name:
[[_attr_type,
PyTango._PyTango.AttrDataFormat.SCALAR,
PyTango._PyTango.AttrWriteType.READ_WRITE], {
'Display level': PyTango._PyTango.DispLevel.OPERATOR,
'format': '%10.3f',
'description': '%s : u 2' % _attr_name,
'unit': 'user units/s^2',
'label': _attr_name
}]})
# Creates functions to read and write settings.
def read_custattr(self, attr, _axis=_axis, _attr_name=_attr_name):
_val = _axis.get_setting(_attr_name)
attr.set_value(_val)
new_read_attr_method = types.MethodType(read_custattr, new_axis_class,
new_axis_class.__class__)
setattr(new_axis_class, "read_%s" % _attr_name, new_read_attr_method)
def write_custattr(self, attr, _axis=_axis, _attr_name=_attr_name):
data = attr.get_write_value()
_axis.set_setting(_attr_name, data)
new_write_attr_method = types.MethodType(write_custattr, new_axis_class,
new_axis_class.__class__)
setattr(new_axis_class, "write_%s" % _attr_name, new_write_attr_method)
# End of custom command and settings
elog.debug("BlissAxisManager.py : Adds new Axis specific class.")
py.add_class(new_axis_class_class, new_axis_class)
elog.debug("BlissAxisManager.py : Class added.")
elog.debug("BlissAxisManager.py : intitialize server.")
U.server_init()
except PyTango.DevFailed:
print traceback.format_exc()
elog.exception(
"Error in server initialization")
sys.exit(0)
try:
bliss_admin_device_names = get_devices_from_server().get('BlissAxisManager')
if bliss_admin_device_names:
blname, server_name, device_number = bliss_admin_device_names[
0].split('/')
for axis_name in bliss_config.axis_names_list():
device_name = '/'.join((blname,
'%s_%s' % (server_name, device_number),
axis_name))
try:
elog.debug("Creating %s" % device_name)
U.create_device("BlissAxis_%s" % axis_name, device_name)
except PyTango.DevFailed:
# print traceback.format_exc()
elog.debug("Device %s already defined in Tango database" % device_name)
pass
# If axis name is not already a tango alias,
# define it as an alias of the device.
try:
db.get_device_alias(axis_name)
except PyTango.DevFailed:
db.put_device_alias(device_name, axis_name)
elog.debug("Created alias %s for device %s" % (axis_name, device_name))
else:
# Do not raise exception to be able to use
# Jive device creation wizard.
elog.error("No bliss supervisor device",
raise_exception=False)
except PyTango.DevFailed:
print traceback.format_exc()
elog.exception(
"Error in devices initialization")
sys.exit(0)
U.server_run()
def tearDownClass(cls):
TgGevent.execute("exit")
def test_get_axis(self):
robz = TgGevent.get_proxy(bliss.get_axis, "robz")
self.assertTrue(robz)
def setUp(self):
TgGevent.execute(bliss.load_cfg_fromstring, config_xml)
def setUp(self):
TgGevent.execute(emotion.load_cfg_fromstring, config_xml)