def DefSettings(stuff):
"""fucntion interacts with the user and defines all settings based on the dictionary we built"""
for key,value in sorted(stuff.items(), key=lambda e: e[1][3]):##sort the dictionary OF lists based on 3rd entry
gui.reset_scrn(stuff)
gui.cur_pos(1,27,stuff[key][0],"4;32;40")## print out info ##
if stuff[key][1] is 0: ## this is a user input feild
stuff = settings.set_option(key,raw_input(key+"[\x1b[1;31;40m"+stuff[key][2]+"\x1b[0m]: "),stuff[key][2],stuff)## get input from user and place back into our settings
else: ## this is just information so give the user some time to read it
gui.cur_pos(1,27,stuff[key][0]+": \x1b[1;31;40m"+stuff[key][2],"1;32;40")## GREEN with RED option
raw_input("Press Enter to continue installation....")
def DefSettings(stuff):
"""fucntion interacts with the user and defines all settings based on the dictionary we built"""
for key, value in sorted(stuff.items(), key=lambda e: e[1][
3]): ##sort the dictionary OF lists based on 3rd entry
gui.reset_scrn(stuff)
gui.cur_pos(1, 27, stuff[key][0], "4;32;40") ## print out info ##
if stuff[key][1] is 0: ## this is a user input feild
stuff = settings.set_option(
key,
raw_input(key + "[\x1b[1;31;40m" + stuff[key][2] +
"\x1b[0m]: "), stuff[key][2],
stuff) ## get input from user and place back into our settings
else: ## this is just information so give the user some time to read it
gui.cur_pos(1, 27,
stuff[key][0] + ": \x1b[1;31;40m" + stuff[key][2],
"1;32;40") ## GREEN with RED option
raw_input("Press Enter to continue installation....")
def main():
## TODO rebuild Q + A section with a loop to dynamicly load values from the settings dictionary ##
## dynamic Q + A section finished DefSettings(STUFF)
gui.reset_scrn(INSTALLER_SETTINGS)
gui.cur_pos(1,27,"Welcome to the MaNGOS installer.\nDurring this script we will figure out how you want your MaNGOS server set up","0;0;0")
raw_input("Press Enter to initilize installer....")
## BUILD OPTIONS WITH USER INPUT ##
DefSettings(INSTALLER_SETTINGS) ## Interact with user to define MaNGOS Environment Settings ##
## BUILD PATH ##
gui.cur_pos(1,27,"Elivating Permissions to clean out old directory and install new user (this is completly safe as we are only erasing the mangos home folder)","0;0;0")
subprocess.call(shlex.split('sudo rm -Rf '+settings.SERV_HOME))
subprocess.call(shlex.split('sudo rm -Rf '+INSTALLER_SETTINGS["INSTALL_DIR"][2])) ## We end up recompiling the server and reconfiguring it during an install ##
subprocess.call(shlex.split('sudo groupadd --system '+INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2])) ## it is ideal to run bolth services on there own group
subprocess.call(shlex.split('sudo groupadd --system '+INSTALLER_SETTINGS["REALMD_SYS_GROUP"][2])) ## this is to stick with the *IX standard way of things
subprocess.call(shlex.split('sudo mkdir -p '+settings.CODE_BASE))
subprocess.call(shlex.split('sudo mkdir -p '+INSTALLER_SETTINGS["INSTALL_DIR"][2])) ## build the install directory and get it ready to go
subprocess.call(shlex.split('sudo chown -R '+env.UserName()+':'+INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2]+' '+settings.CODE_BASE)) ## set perms for user to clone ##
subprocess.call(shlex.split('sudo mkdir -p '+INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])) ## we need to add the web directory before configurin it
subprocess.call(shlex.split('sudo chown -R '+env.UserName()+':'+INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2]+' '+INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])) ## change owner of the web directory ready for installing the webpage
## Initilize Repository ##
gui.reset_scrn(INSTALLER_SETTINGS)
gui.cur_pos(1,28,"CLONING REPOSITORY TO "+INSTALLER_SETTINGS["GIT_REPO_CI_SERVER"][2],"1;31;40")
git_server_handle = Repo.clone_from("https://github.com/CollectiveIndustries/server.git",INSTALLER_SETTINGS["GIT_REPO_CI_SERVER"][2])
#reset_scrn()
gui.cur_pos(1,29,"CLONING REPOSITORY TO "+INSTALLER_SETTINGS["GIT_REPO_CI_DBS"][2],"1;31;40")
git_database_handle = Repo.clone_from("https://github.com/CollectiveIndustries/Mangos_world_database.git",INSTALLER_SETTINGS["GIT_REPO_CI_DBS"][2])
#reset_scrn()
gui.cur_pos(1,30,"CLONING REPOSITORY TO "+INSTALLER_SETTINGS["GIT_REPO_CI_SD2"][2],"1;31;40")
git_scriptdev2_handle = Repo.clone_from("https://github.com/CollectiveIndustries/scriptdev2-cata.git",INSTALLER_SETTINGS["GIT_REPO_CI_SD2"][2])
#reset_scrn()
gui.cur_pos(1,32,"CLONING REPOSITORY TO "+INSTALLER_SETTINGS["GIT_REPO_CI_TOOLS"][2],"1;31;40")
git_tools_handle = Repo.clone_from("https://github.com/CollectiveIndustries/tools",INSTALLER_SETTINGS["GIT_REPO_CI_TOOLS"][2])
## check and see if we are making a dry run on the compile ##
if COMPILE_ONLY == False:
#reset_scrn()
gui.cur_pos(1,31,"CLONING REPOSITORY TO "+INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2],"1;31;40")
git_web_handle = Repo.clone_from("https://github.com/CollectiveIndustries/mangos-enhanced.git",INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])
#reset_scrn()
gui.cur_pos(1,32,"CLONING REPOSITORY TO "+settings.INSTALL_DIR+INSTALLER_SETTINGS["MANGOS_DATA_DIR"][2],"1;31;40")
git_tools_handle = Repo.clone_from("https://github.com/CollectiveIndustries/Maps-VMaps-DBC.git",settings.INSTALL_DIR+INSTALLER_SETTINGS["MANGOS_DATA_DIR"][2])
## change owner of directories ##
gui.cur_pos(1,32,"Changing directory permissions on: "+settings.CODE_BASE,"1;31;40")
subprocess.call(shlex.split('sudo chown -R '+env.UserName()+':'+INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2]+' '+settings.CODE_BASE))## set the owner of the directory so we can leave ROOT
## start the MySQL Install ##
gui.reset_scrn(INSTALLER_SETTINGS)
_realm_db_ = MySQLdb.connect(host=INSTALLER_SETTINGS["REALM_DB_HOST"][2],
user=INSTALLER_SETTINGS["MYSQL_REALMD_ADMIN_USR"][2],
passwd=INSTALLER_SETTINGS["MYSQL_REALMD_ADMIN_PASS"][2])## pull the connection settings out and pass to the MySQL Connection
_realm_db_cur_ = _realm_db_.cursor() ## set up our cursor so we can comunicate with the database
_realm_db_cur_.execute("CREATE USER "+INSTALLER_SETTINGS["MYSQL_REALMD_USR"][2]+"@"+INSTALLER_SETTINGS["REALM_DB_HOST"][2]+" IDENTIFIED BY \'"+INSTALLER_SETTINGS["MYSQL_REALMD_PASS"][2]+"\';")## NO TRAILING ';'
def main():
## TODO rebuild Q + A section with a loop to dynamicly load values from the settings dictionary ##
## dynamic Q + A section finished DefSettings(STUFF)
gui.reset_scrn(INSTALLER_SETTINGS)
gui.cur_pos(
1, 27,
"Welcome to the MaNGOS installer.\nDurring this script we will figure out how you want your MaNGOS server set up",
"0;0;0")
raw_input("Press Enter to initilize installer....")
## BUILD OPTIONS WITH USER INPUT ##
DefSettings(
INSTALLER_SETTINGS
) ## Interact with user to define MaNGOS Environment Settings ##
## BUILD PATH ##
gui.cur_pos(
1, 27,
"Elivating Permissions to clean out old directory and install new user (this is completly safe as we are only erasing the mangos home folder)",
"0;0;0")
subprocess.call(shlex.split('sudo rm -Rf ' + settings.SERV_HOME))
subprocess.call(
shlex.split('sudo rm -Rf ' + INSTALLER_SETTINGS["INSTALL_DIR"][2])
) ## We end up recompiling the server and reconfiguring it during an install ##
subprocess.call(
shlex.split('sudo groupadd --system ' +
INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2])
) ## it is ideal to run bolth services on there own group
subprocess.call(
shlex.split('sudo groupadd --system ' +
INSTALLER_SETTINGS["REALMD_SYS_GROUP"][2])
) ## this is to stick with the *IX standard way of things
subprocess.call(shlex.split('sudo mkdir -p ' + settings.CODE_BASE))
subprocess.call(
shlex.split('sudo mkdir -p ' + INSTALLER_SETTINGS["INSTALL_DIR"][2])
) ## build the install directory and get it ready to go
subprocess.call(
shlex.split('sudo chown -R ' + env.UserName() + ':' +
INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2] + ' ' +
settings.CODE_BASE)) ## set perms for user to clone ##
subprocess.call(
shlex.split('sudo mkdir -p ' +
INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])
) ## we need to add the web directory before configurin it
subprocess.call(
shlex.split('sudo chown -R ' + env.UserName() + ':' +
INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2] + ' ' +
INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])
) ## change owner of the web directory ready for installing the webpage
## Initilize Repository ##
gui.reset_scrn(INSTALLER_SETTINGS)
gui.cur_pos(
1, 28,
"CLONING REPOSITORY TO " + INSTALLER_SETTINGS["GIT_REPO_CI_SERVER"][2],
"1;31;40")
git_server_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/server.git",
INSTALLER_SETTINGS["GIT_REPO_CI_SERVER"][2])
#reset_scrn()
gui.cur_pos(
1, 29,
"CLONING REPOSITORY TO " + INSTALLER_SETTINGS["GIT_REPO_CI_DBS"][2],
"1;31;40")
git_database_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/Mangos_world_database.git",
INSTALLER_SETTINGS["GIT_REPO_CI_DBS"][2])
#reset_scrn()
gui.cur_pos(
1, 30,
"CLONING REPOSITORY TO " + INSTALLER_SETTINGS["GIT_REPO_CI_SD2"][2],
"1;31;40")
git_scriptdev2_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/scriptdev2-cata.git",
INSTALLER_SETTINGS["GIT_REPO_CI_SD2"][2])
#reset_scrn()
gui.cur_pos(
1, 32,
"CLONING REPOSITORY TO " + INSTALLER_SETTINGS["GIT_REPO_CI_TOOLS"][2],
"1;31;40")
git_tools_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/tools",
INSTALLER_SETTINGS["GIT_REPO_CI_TOOLS"][2])
## check and see if we are making a dry run on the compile ##
if COMPILE_ONLY == False:
#reset_scrn()
gui.cur_pos(
1, 31, "CLONING REPOSITORY TO " +
INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2], "1;31;40")
git_web_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/mangos-enhanced.git",
INSTALLER_SETTINGS["GIT_REPO_CI_WEB"][2])
#reset_scrn()
gui.cur_pos(
1, 32, "CLONING REPOSITORY TO " + settings.INSTALL_DIR +
INSTALLER_SETTINGS["MANGOS_DATA_DIR"][2], "1;31;40")
git_tools_handle = Repo.clone_from(
"https://github.com/CollectiveIndustries/Maps-VMaps-DBC.git",
settings.INSTALL_DIR + INSTALLER_SETTINGS["MANGOS_DATA_DIR"][2])
## change owner of directories ##
gui.cur_pos(1, 32,
"Changing directory permissions on: " + settings.CODE_BASE,
"1;31;40")
subprocess.call(
shlex.split('sudo chown -R ' + env.UserName() + ':' +
INSTALLER_SETTINGS["MANGOS_SYS_GROUP"][2] + ' ' +
settings.CODE_BASE)
) ## set the owner of the directory so we can leave ROOT
## start the MySQL Install ##
gui.reset_scrn(INSTALLER_SETTINGS)
_realm_db_ = MySQLdb.connect(
host=INSTALLER_SETTINGS["REALM_DB_HOST"][2],
user=INSTALLER_SETTINGS["MYSQL_REALMD_ADMIN_USR"][2],
passwd=INSTALLER_SETTINGS["MYSQL_REALMD_ADMIN_PASS"][2]
) ## pull the connection settings out and pass to the MySQL Connection
_realm_db_cur_ = _realm_db_.cursor(
) ## set up our cursor so we can comunicate with the database
_realm_db_cur_.execute(
"CREATE USER " + INSTALLER_SETTINGS["MYSQL_REALMD_USR"][2] + "@" +
INSTALLER_SETTINGS["REALM_DB_HOST"][2] + " IDENTIFIED BY \'" +
INSTALLER_SETTINGS["MYSQL_REALMD_PASS"][2] + "\';") ## NO TRAILING ';'
