def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage,
"Path")
FreeCADGui.addPreferencePage(
PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
from PathScripts import PathGuiInit
from PathScripts import PathJobCmd
import PathCommands
PathGuiInit.Startup()
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = [
"Path_Inspect", "Path_Simulator", "Path_ToolLibraryEdit",
"Path_SelectLoop", "Path_OpActiveToggle"
]
prepcmdlist = [
"Path_Fixture", "Path_Comment", "Path_Stop", "Path_Custom"
]
twodopcmdlist = [
"Path_Contour", "Path_Profile_Faces", "Path_Profile_Edges",
"Path_Pocket_Shape", "Path_Drilling", "Path_MillFace",
"Path_Helix", "Path_Adaptive"
]
threedopcmdlist = ["Path_Pocket_3D"]
engravecmdlist = ["Path_Engrave", "Path_Deburr"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
dressupcmdlist = [
"Path_DressupAxisMap", "Path_DressupDogbone",
"Path_DressupDragKnife", "Path_DressupLeadInOut",
"Path_DressupRampEntry", "Path_DressupTag"
]
extracmdlist = []
#modcmdmore = ["Path_Hop",]
#remotecmdlist = ["Path_Remote"]
engravecmdgroup = ['Path_EngraveTools']
FreeCADGui.addCommand(
'Path_EngraveTools',
PathCommandGroup(
engravecmdlist,
QtCore.QT_TRANSLATE_NOOP("Path", 'Engraving Operations')))
threedcmdgroup = threedopcmdlist
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
try:
import ocl # pylint: disable=unused-variable
from PathScripts import PathSurfaceGui
threedopcmdlist.append("Path_Surface")
threedcmdgroup = ['Path_3dTools']
FreeCADGui.addCommand(
'Path_3dTools',
PathCommandGroup(
threedopcmdlist,
QtCore.QT_TRANSLATE_NOOP("Path", '3D Operations')))
except ImportError:
FreeCAD.Console.PrintError("OpenCamLib is not working!\n")
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Project Setup"),
projcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Tool Commands"),
toolcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "New Operations"),
twodopcmdlist + engravecmdgroup + threedcmdgroup)
self.appendToolbar(
QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification"), modcmdlist)
if extracmdlist:
self.appendToolbar(
QtCore.QT_TRANSLATE_NOOP("Path", "Helpful Tools"),
extracmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")],
projcmdlist + ["Path_ExportTemplate", "Separator"] +
toolcmdlist + ["Separator"] + twodopcmdlist +
engravecmdlist + ["Separator"] + threedopcmdlist +
["Separator"])
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Path Dressup")
], dressupcmdlist)
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Supplemental Commands")
], prepcmdlist)
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification")
], modcmdlist)
if extracmdlist:
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")],
extracmdlist)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(Accuracy=curveAccuracy)
Log('Loading Path workbench... done\n')
def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage, "Path")
FreeCADGui.addPreferencePage(
PathPreferencesPathDressup.DressupPreferencesPage, "Path"
)
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
from PathScripts import PathGuiInit
from PathScripts import PathJobCmd
from PathScripts import PathToolBitCmd
from PathScripts import PathToolBitLibraryCmd
from PySide.QtCore import QT_TRANSLATE_NOOP
import PathCommands
PathGuiInit.Startup()
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = [
"Path_Inspect",
"Path_Simulator",
"Path_SelectLoop",
"Path_OpActiveToggle",
]
prepcmdlist = [
"Path_Fixture",
"Path_Comment",
"Path_Stop",
"Path_Custom",
"Path_Probe",
]
twodopcmdlist = [
"Path_Profile",
"Path_Pocket_Shape",
"Path_Drilling",
"Path_MillFace",
"Path_Helix",
"Path_Adaptive",
]
threedopcmdlist = ["Path_Pocket3D"]
engravecmdlist = ["Path_Engrave", "Path_Deburr", "Path_Vcarve"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
dressupcmdlist = [
"Path_DressupAxisMap",
"Path_DressupPathBoundary",
"Path_DressupDogbone",
"Path_DressupDragKnife",
"Path_DressupLeadInOut",
"Path_DressupRampEntry",
"Path_DressupTag",
"Path_DressupZCorrect",
]
extracmdlist = []
# modcmdmore = ["Path_Hop",]
# remotecmdlist = ["Path_Remote"]
specialcmdlist = []
if PathPreferences.toolsUseLegacyTools():
toolcmdlist.append("Path_ToolLibraryEdit")
toolbitcmdlist = []
else:
toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
toolbitcmdlist = PathToolBitLibraryCmd.MenuList
engravecmdgroup = ["Path_EngraveTools"]
FreeCADGui.addCommand(
"Path_EngraveTools",
PathCommandGroup(
engravecmdlist, QT_TRANSLATE_NOOP("Path_EngraveTools", "Engraving Operations")
),
)
threedcmdgroup = threedopcmdlist
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
specialcmdlist.append("Path_ThreadMilling")
twodopcmdlist.append("Path_Slot")
if PathPreferences.advancedOCLFeaturesEnabled():
try:
import ocl # pylint: disable=unused-variable
from PathScripts import PathSurfaceGui
from PathScripts import PathWaterlineGui
threedopcmdlist.extend(["Path_Surface", "Path_Waterline"])
threedcmdgroup = ["Path_3dTools"]
FreeCADGui.addCommand(
"Path_3dTools",
PathCommandGroup(
threedopcmdlist,
QT_TRANSLATE_NOOP("Path_3dTools", "3D Operations"),
),
)
except ImportError:
if not PathPreferences.suppressOpenCamLibWarning():
FreeCAD.Console.PrintError("OpenCamLib is not working!\n")
self.appendToolbar(
QT_TRANSLATE_NOOP("Path", "Project Setup"), projcmdlist
)
self.appendToolbar(
QT_TRANSLATE_NOOP("Path", "Tool Commands"), toolcmdlist
)
self.appendToolbar(
QT_TRANSLATE_NOOP("Path", "New Operations"),
twodopcmdlist + engravecmdgroup + threedcmdgroup,
)
self.appendToolbar(
QT_TRANSLATE_NOOP("Path", "Path Modification"), modcmdlist
)
if extracmdlist:
self.appendToolbar(
QT_TRANSLATE_NOOP("Path", "Helpful Tools"), extracmdlist
)
self.appendMenu(
[QT_TRANSLATE_NOOP("Path", "&Path")],
projcmdlist
+ ["Path_ExportTemplate", "Separator"]
+ toolcmdlist
+ toolbitcmdlist
+ ["Separator"]
+ twodopcmdlist
+ engravecmdlist
+ ["Separator"]
+ threedopcmdlist
+ ["Separator"],
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Path Dressup"),
],
dressupcmdlist,
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Supplemental Commands"),
],
prepcmdlist,
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Path Modification"),
],
modcmdlist,
)
if specialcmdlist:
self.appendMenu(
[
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Specialty Operations"),
],
specialcmdlist,
)
if extracmdlist:
self.appendMenu([QT_TRANSLATE_NOOP("Path", "&Path")], extracmdlist)
self.appendMenu([QT_TRANSLATE_NOOP("Path", "&Path")], ["Separator"])
self.appendMenu(
[
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Utils"),
],
["Path_PropertyBag"],
)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(Accuracy=curveAccuracy)
# keep this one the last entry in the preferences
import PathScripts.PathPreferencesAdvanced as PathPreferencesAdvanced
FreeCADGui.addPreferencePage(
PathPreferencesAdvanced.AdvancedPreferencesPage, "Path"
)
Log("Loading Path workbench... done\n")
def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
translate = FreeCAD.Qt.translate
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage,
"Path")
FreeCADGui.addPreferencePage(
PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
from PathScripts import PathGuiInit
from PathScripts import PathJobCmd
from PathScripts import PathToolBitCmd
from PathScripts import PathToolBitLibraryCmd
from PySide.QtCore import QT_TRANSLATE_NOOP
import PathCommands
PathGuiInit.Startup()
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = [
"Path_Inspect",
"Path_Simulator",
"Path_SelectLoop",
"Path_OpActiveToggle",
]
prepcmdlist = [
"Path_Fixture",
"Path_Comment",
"Path_Stop",
"Path_Custom",
"Path_Probe",
]
twodopcmdlist = [
"Path_Profile",
"Path_Pocket_Shape",
"Path_Drilling",
"Path_MillFace",
"Path_Helix",
"Path_Adaptive",
]
threedopcmdlist = ["Path_Pocket3D"]
engravecmdlist = ["Path_Engrave", "Path_Deburr", "Path_Vcarve"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
dressupcmdlist = [
"Path_DressupAxisMap",
"Path_DressupPathBoundary",
"Path_DressupDogbone",
"Path_DressupDragKnife",
"Path_DressupLeadInOut",
"Path_DressupRampEntry",
"Path_DressupTag",
"Path_DressupZCorrect",
]
extracmdlist = []
# modcmdmore = ["Path_Hop",]
# remotecmdlist = ["Path_Remote"]
specialcmdlist = []
if PathPreferences.toolsUseLegacyTools():
toolcmdlist.append("Path_ToolLibraryEdit")
toolbitcmdlist = []
else:
toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
toolbitcmdlist = PathToolBitLibraryCmd.MenuList
engravecmdgroup = ["Path_EngraveTools"]
FreeCADGui.addCommand(
"Path_EngraveTools",
PathCommandGroup(
engravecmdlist,
QT_TRANSLATE_NOOP("Path_EngraveTools", "Engraving Operations"),
),
)
threedcmdgroup = threedopcmdlist
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
specialcmdlist.append("Path_ThreadMilling")
twodopcmdlist.append("Path_Slot")
if PathPreferences.advancedOCLFeaturesEnabled():
try:
import ocl
from PathScripts import PathSurfaceGui
from PathScripts import PathWaterlineGui
threedopcmdlist.extend(["Path_Surface", "Path_Waterline"])
threedcmdgroup = ["Path_3dTools"]
FreeCADGui.addCommand(
"Path_3dTools",
PathCommandGroup(
threedopcmdlist,
QT_TRANSLATE_NOOP("Path_3dTools", "3D Operations"),
),
)
except ImportError:
if not PathPreferences.suppressOpenCamLibWarning():
FreeCAD.Console.PrintError("OpenCamLib is not working!\n")
self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Project Setup"),
projcmdlist)
self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Tool Commands"),
toolcmdlist)
self.appendToolbar(
QT_TRANSLATE_NOOP("Workbench", "New Operations"),
twodopcmdlist + engravecmdgroup + threedcmdgroup,
)
self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
modcmdlist)
if extracmdlist:
self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Helpful Tools"),
extracmdlist)
self.appendMenu(
[QT_TRANSLATE_NOOP("Workbench", "&Path")],
projcmdlist + ["Path_ExportTemplate", "Separator"] + toolcmdlist +
toolbitcmdlist + ["Separator"] + twodopcmdlist + engravecmdlist +
["Separator"] + threedopcmdlist + ["Separator"],
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Workbench", "&Path"),
QT_TRANSLATE_NOOP("Workbench", "Path Dressup"),
],
dressupcmdlist,
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Workbench", "&Path"),
QT_TRANSLATE_NOOP("Workbench", "Supplemental Commands"),
],
prepcmdlist,
)
self.appendMenu(
[
QT_TRANSLATE_NOOP("Workbench", "&Path"),
QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
],
modcmdlist,
)
if specialcmdlist:
self.appendMenu(
[
QT_TRANSLATE_NOOP("Workbench", "&Path"),
QT_TRANSLATE_NOOP("Workbench", "Specialty Operations"),
],
specialcmdlist,
)
if extracmdlist:
self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&Path")],
extracmdlist)
self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&Path")],
["Separator"])
self.appendMenu(
[
QT_TRANSLATE_NOOP("Workbench", "&Path"),
QT_TRANSLATE_NOOP("Workbench", "Utils"),
],
["Path_PropertyBag"],
)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(Accuracy=curveAccuracy)
# keep this one the last entry in the preferences
import PathScripts.PathPreferencesAdvanced as PathPreferencesAdvanced
from PathScripts.PathPreferences import preferences
FreeCADGui.addPreferencePage(
PathPreferencesAdvanced.AdvancedPreferencesPage, "Path")
Log("Loading Path workbench... done\n")
# Warn user if current schema doesn't use minute for time in velocity
if not PathPreferences.suppressVelocity():
velString = FreeCAD.Units.Quantity(
1, FreeCAD.Units.Velocity).getUserPreferred()[2][3:]
if velString != "min":
current_schema = FreeCAD.Units.listSchemas(
FreeCAD.Units.getSchema())
msg = translate(
"Path",
f"The currently selected unit schema: \n '{current_schema}'\n Does not use 'minutes' for velocity values. \n \nCNC machines require feed rate to be expressed in \nunit/minute. To ensure correct gcode: \nSelect a minute-based schema in preferences.\nFor example:\n 'Metric, Small Parts & CNC'\n 'US Customary'\n 'Imperial Decimal'",
)
header = translate("Path", "Warning")
msgbox = QtGui.QMessageBox(QtGui.QMessageBox.Warning, header,
msg)
msgbox.addButton(translate("Path", "Ok"),
QtGui.QMessageBox.AcceptRole)
msgbox.addButton(translate("Path", "Don't Show This Anymore"),
QtGui.QMessageBox.ActionRole)
if msgbox.exec_() == 1:
preferences().SetBool("WarningSuppressVelocity", True)
def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage, "Path")
FreeCADGui.addPreferencePage(PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
# load python modules
from PathScripts import PathArray
from PathScripts import PathComment
from PathScripts import PathCustom
from PathScripts import PathDeburrGui
from PathScripts import PathDressupAxisMap
from PathScripts import PathDressupDogbone
from PathScripts import PathDressupDragknife
from PathScripts import PathDressupRampEntry
from PathScripts import PathDressupTagGui
from PathScripts import PathDressupLeadInOut
from PathScripts import PathDrillingGui
from PathScripts import PathEngraveGui
from PathScripts import PathFixture
from PathScripts import PathHelixGui
from PathScripts import PathHop
from PathScripts import PathInspect
from PathScripts import PathJobCmd
from PathScripts import PathMillFaceGui
from PathScripts import PathPocketGui
from PathScripts import PathPocketShapeGui
from PathScripts import PathPost
from PathScripts import PathProfileContourGui
from PathScripts import PathProfileEdgesGui
from PathScripts import PathProfileFacesGui
from PathScripts import PathSanity
from PathScripts import PathSetupSheetGui
from PathScripts import PathSimpleCopy
from PathScripts import PathStop
from PathScripts import PathSurfaceGui
from PathScripts import PathToolController
from PathScripts import PathToolLibraryManager
from PathScripts import PathSimulatorGui
from PathScripts import PathAdaptiveGui
import PathCommands
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = ["Path_Inspect", "Path_Simulator", "Path_ToolLibraryEdit", "Path_SelectLoop"]
prepcmdlist = ["Path_Fixture", "Path_Comment", "Path_Stop", "Path_Custom"]
twodopcmdlist = ["Path_Contour", "Path_Profile_Faces", "Path_Profile_Edges", "Path_Pocket_Shape", "Path_Drilling", "Path_MillFace", "Path_Helix" ]
threedopcmdlist = ["Path_Pocket_3D"]
engravecmdlist = ["Path_Engrave"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy" ]
dressupcmdlist = ["Path_DressupAxisMap", "Path_DressupDogbone", "Path_DressupDragKnife", "Path_DressupLeadInOut", "Path_DressupRampEntry", "Path_DressupTag"]
extracmdlist = []
#modcmdmore = ["Path_Hop",]
#remotecmdlist = ["Path_Remote"]
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
engravecmdlist = sorted(engravecmdlist + ['Path_Deburr'])
engravecmdgroup = ['Path_EngraveTools']
FreeCADGui.addCommand('Path_EngraveTools', PathCommandGroup(engravecmdlist, QtCore.QT_TRANSLATE_NOOP("Path", 'Engraving Operations')))
threedopcmdlist.append("Path_Surface")
threedcmdgroup = ['Path_3dTools']
FreeCADGui.addCommand('Path_3dTools', PathCommandGroup(threedopcmdlist, QtCore.QT_TRANSLATE_NOOP("Path",'3D Operations')))
twodopcmdlist.append("Path_Adaptive")
else:
engravecmdgroup = engravecmdlist
threedcmdgroup = threedopcmdlist
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Project Setup"), projcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Tool Commands"), toolcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "New Operations"), twodopcmdlist+engravecmdgroup+threedcmdgroup)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification"), modcmdlist)
if extracmdlist:
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Helpful Tools"), extracmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")], projcmdlist +["Path_ExportTemplate", "Separator"] + toolcmdlist +["Separator"] + twodopcmdlist + engravecmdlist +["Separator"] +threedopcmdlist +["Separator"])
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Path Dressup")], dressupcmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Supplemental Commands")], prepcmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Path Modification")], modcmdlist)
if extracmdlist:
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")], extracmdlist)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(curveAccuracy)
Log('Loading Path workbench... done\n')
def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage, "Path")
FreeCADGui.addPreferencePage(PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
from PathScripts import PathGuiInit
from PathScripts import PathJobCmd
import PathCommands
PathGuiInit.Startup()
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = ["Path_Inspect", "Path_Simulator", "Path_ToolLibraryEdit", "Path_SelectLoop", "Path_OpActiveToggle"]
prepcmdlist = ["Path_Fixture", "Path_Comment", "Path_Stop", "Path_Custom"]
twodopcmdlist = ["Path_Contour", "Path_Profile_Faces", "Path_Profile_Edges", "Path_Pocket_Shape", "Path_Drilling", "Path_MillFace", "Path_Helix", "Path_Adaptive" ]
threedopcmdlist = ["Path_Pocket_3D"]
engravecmdlist = ["Path_Engrave", "Path_Deburr"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy" ]
dressupcmdlist = ["Path_DressupAxisMap", "Path_DressupDogbone", "Path_DressupDragKnife", "Path_DressupLeadInOut", "Path_DressupRampEntry", "Path_DressupTag"]
extracmdlist = []
#modcmdmore = ["Path_Hop",]
#remotecmdlist = ["Path_Remote"]
engravecmdgroup = ['Path_EngraveTools']
FreeCADGui.addCommand('Path_EngraveTools', PathCommandGroup(engravecmdlist, QtCore.QT_TRANSLATE_NOOP("Path", 'Engraving Operations')))
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
threedopcmdlist.append("Path_Surface")
threedcmdgroup = ['Path_3dTools']
FreeCADGui.addCommand('Path_3dTools', PathCommandGroup(threedopcmdlist, QtCore.QT_TRANSLATE_NOOP("Path",'3D Operations')))
else:
threedcmdgroup = threedopcmdlist
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Project Setup"), projcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Tool Commands"), toolcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "New Operations"), twodopcmdlist+engravecmdgroup+threedcmdgroup)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification"), modcmdlist)
if extracmdlist:
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Helpful Tools"), extracmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")], projcmdlist +["Path_ExportTemplate", "Separator"] + toolcmdlist +["Separator"] + twodopcmdlist + engravecmdlist +["Separator"] +threedopcmdlist +["Separator"])
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Path Dressup")], dressupcmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Supplemental Commands")], prepcmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path"), QtCore.QT_TRANSLATE_NOOP(
"Path", "Path Modification")], modcmdlist)
if extracmdlist:
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")], extracmdlist)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(Accuracy = curveAccuracy)
Log('Loading Path workbench... done\n')
def Initialize(self):
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage,
"Path")
FreeCADGui.addPreferencePage(
PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
# load python modules
from PathScripts import PathArray
from PathScripts import PathComment
from PathScripts import PathCustom
from PathScripts import PathDressupAxisMap
from PathScripts import PathDressupDogbone
from PathScripts import PathDressupDragknife
from PathScripts import PathDressupRampEntry
from PathScripts import PathDressupTagGui
from PathScripts import PathDressupLeadInOut
from PathScripts import PathDrillingGui
from PathScripts import PathEngraveGui
from PathScripts import PathFixture
from PathScripts import PathHelixGui
from PathScripts import PathHop
from PathScripts import PathInspect
from PathScripts import PathJobCmd
from PathScripts import PathMillFaceGui
from PathScripts import PathPocketGui
from PathScripts import PathPocketShapeGui
from PathScripts import PathPost
from PathScripts import PathProfileContourGui
from PathScripts import PathProfileEdgesGui
from PathScripts import PathProfileFacesGui
from PathScripts import PathSanity
from PathScripts import PathSimpleCopy
from PathScripts import PathStop
from PathScripts import PathSurfaceGui
from PathScripts import PathToolController
from PathScripts import PathToolLibraryManager
from PathScripts import PathSimulatorGui
import PathCommands
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = [
"Path_Inspect", "Path_Simulator", "Path_ToolLibraryEdit",
"Path_SelectLoop"
]
prepcmdlist = [
"Path_Fixture", "Path_Comment", "Path_Stop", "Path_Custom"
]
twodopcmdlist = [
"Path_Contour", "Path_Profile_Faces", "Path_Profile_Edges",
"Path_Pocket_Shape", "Path_Drilling", "Path_Engrave",
"Path_MillFace", "Path_Helix"
]
threedopcmdlist = ["Path_Pocket_3D"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
dressupcmdlist = [
"Path_DressupAxisMap", "Path_DressupDogbone",
"Path_DressupDragKnife", "Path_DressupLeadInOut",
"Path_DressupRampEntry", "Path_DressupTag"
]
extracmdlist = []
#modcmdmore = ["Path_Hop",]
#remotecmdlist = ["Path_Remote"]
# Add commands to menu and toolbar
def QT_TRANSLATE_NOOP(scope, text):
return text
class ThreeDCommandGroup:
def GetCommands(self):
return tuple(threedopcmdlist)
def GetResources(self):
return {
'MenuText': QT_TRANSLATE_NOOP("Path", '3D Operations'),
'ToolTip': QT_TRANSLATE_NOOP("Path", '3D Operations')
}
def IsActive(self):
if FreeCAD.ActiveDocument is not None:
for o in FreeCAD.ActiveDocument.Objects:
if o.Name[:3] == "Job":
return True
return False
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
threedopcmdlist.append("Path_Surface")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
FreeCADGui.addCommand('Path_3dTools', ThreeDCommandGroup())
threedcmdgroup = ['Path_3dTools']
else:
threedcmdgroup = threedopcmdlist
self.appendToolbar(QT_TRANSLATE_NOOP("Path", "Project Setup"),
projcmdlist)
self.appendToolbar(QT_TRANSLATE_NOOP("Path", "Tool Commands"),
toolcmdlist)
self.appendToolbar(QT_TRANSLATE_NOOP("Path", "New Operations"),
twodopcmdlist + threedcmdgroup)
self.appendToolbar(QT_TRANSLATE_NOOP("Path", "Path Modification"),
modcmdlist)
if extracmdlist:
self.appendToolbar(QT_TRANSLATE_NOOP("Path", "Helpful Tools"),
extracmdlist)
self.appendMenu([QT_TRANSLATE_NOOP("Path", "&Path")],
projcmdlist + ["Path_ExportTemplate", "Separator"] +
toolcmdlist + ["Separator"] + twodopcmdlist +
["Separator"] + threedopcmdlist + ["Separator"])
self.appendMenu([
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Path Dressup")
], dressupcmdlist)
self.appendMenu([
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Supplemental Commands")
], prepcmdlist)
self.appendMenu([
QT_TRANSLATE_NOOP("Path", "&Path"),
QT_TRANSLATE_NOOP("Path", "Path Modification")
], modcmdlist)
if extracmdlist:
self.appendMenu([QT_TRANSLATE_NOOP("Path", "&Path")], extracmdlist)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(curveAccuracy)
Log('Loading Path workbench... done\n')
