示例#1
0
 def loadSettings(self):
     self.form.WarningSuppressAllSpeeds.setChecked(
         PathPreferences.suppressAllSpeedsWarning())
     self.form.WarningSuppressRapidSpeeds.setChecked(
         PathPreferences.suppressRapidSpeedsWarning(False))
     self.form.WarningSuppressSelectionMode.setChecked(
         PathPreferences.suppressSelectionModeWarning())
     self.form.EnableAdvancedOCLFeatures.setChecked(
         PathPreferences.advancedOCLFeaturesEnabled())
     self.form.WarningSuppressOpenCamLib.setChecked(
         PathPreferences.suppressOpenCamLibWarning())
     self.form.WarningSuppressVelocity.setChecked(
         PathPreferences.suppressVelocity())
     self.updateSelection()
示例#2
0
    def Initialize(self):
        global PathCommandGroup

        # Add preferences pages - before loading PathGui to properly order pages of Path group
        from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup

        translate = FreeCAD.Qt.translate

        FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage,
                                     "Path")
        FreeCADGui.addPreferencePage(
            PathPreferencesPathDressup.DressupPreferencesPage, "Path")

        # Check enablement of experimental features
        from PathScripts import PathPreferences

        # load the builtin modules
        import Path
        import PathScripts
        import PathGui
        from PySide import QtCore, QtGui

        FreeCADGui.addLanguagePath(":/translations")
        FreeCADGui.addIconPath(":/icons")
        from PathScripts import PathGuiInit
        from PathScripts import PathJobCmd

        from PathScripts import PathToolBitCmd
        from PathScripts import PathToolBitLibraryCmd

        from PySide.QtCore import QT_TRANSLATE_NOOP

        import PathCommands

        PathGuiInit.Startup()

        # build commands list
        projcmdlist = ["Path_Job", "Path_Post"]
        toolcmdlist = [
            "Path_Inspect",
            "Path_Simulator",
            "Path_SelectLoop",
            "Path_OpActiveToggle",
        ]
        prepcmdlist = [
            "Path_Fixture",
            "Path_Comment",
            "Path_Stop",
            "Path_Custom",
            "Path_Probe",
        ]
        twodopcmdlist = [
            "Path_Profile",
            "Path_Pocket_Shape",
            "Path_Drilling",
            "Path_MillFace",
            "Path_Helix",
            "Path_Adaptive",
        ]
        threedopcmdlist = ["Path_Pocket3D"]
        engravecmdlist = ["Path_Engrave", "Path_Deburr", "Path_Vcarve"]
        modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
        dressupcmdlist = [
            "Path_DressupAxisMap",
            "Path_DressupPathBoundary",
            "Path_DressupDogbone",
            "Path_DressupDragKnife",
            "Path_DressupLeadInOut",
            "Path_DressupRampEntry",
            "Path_DressupTag",
            "Path_DressupZCorrect",
        ]
        extracmdlist = []
        # modcmdmore = ["Path_Hop",]
        # remotecmdlist = ["Path_Remote"]
        specialcmdlist = []

        if PathPreferences.toolsUseLegacyTools():
            toolcmdlist.append("Path_ToolLibraryEdit")
            toolbitcmdlist = []
        else:
            toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
            toolbitcmdlist = PathToolBitLibraryCmd.MenuList

        engravecmdgroup = ["Path_EngraveTools"]
        FreeCADGui.addCommand(
            "Path_EngraveTools",
            PathCommandGroup(
                engravecmdlist,
                QT_TRANSLATE_NOOP("Path_EngraveTools", "Engraving Operations"),
            ),
        )

        threedcmdgroup = threedopcmdlist
        if PathPreferences.experimentalFeaturesEnabled():
            projcmdlist.append("Path_Sanity")
            prepcmdlist.append("Path_Shape")
            extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
            specialcmdlist.append("Path_ThreadMilling")
            twodopcmdlist.append("Path_Slot")

        if PathPreferences.advancedOCLFeaturesEnabled():
            try:
                import ocl
                from PathScripts import PathSurfaceGui
                from PathScripts import PathWaterlineGui

                threedopcmdlist.extend(["Path_Surface", "Path_Waterline"])
                threedcmdgroup = ["Path_3dTools"]
                FreeCADGui.addCommand(
                    "Path_3dTools",
                    PathCommandGroup(
                        threedopcmdlist,
                        QT_TRANSLATE_NOOP("Path_3dTools", "3D Operations"),
                    ),
                )
            except ImportError:
                if not PathPreferences.suppressOpenCamLibWarning():
                    FreeCAD.Console.PrintError("OpenCamLib is not working!\n")

        self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Project Setup"),
                           projcmdlist)
        self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Tool Commands"),
                           toolcmdlist)
        self.appendToolbar(
            QT_TRANSLATE_NOOP("Workbench", "New Operations"),
            twodopcmdlist + engravecmdgroup + threedcmdgroup,
        )
        self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
                           modcmdlist)
        if extracmdlist:
            self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Helpful Tools"),
                               extracmdlist)

        self.appendMenu(
            [QT_TRANSLATE_NOOP("Workbench", "&Path")],
            projcmdlist + ["Path_ExportTemplate", "Separator"] + toolcmdlist +
            toolbitcmdlist + ["Separator"] + twodopcmdlist + engravecmdlist +
            ["Separator"] + threedopcmdlist + ["Separator"],
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&Path"),
                QT_TRANSLATE_NOOP("Workbench", "Path Dressup"),
            ],
            dressupcmdlist,
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&Path"),
                QT_TRANSLATE_NOOP("Workbench", "Supplemental Commands"),
            ],
            prepcmdlist,
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&Path"),
                QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
            ],
            modcmdlist,
        )
        if specialcmdlist:
            self.appendMenu(
                [
                    QT_TRANSLATE_NOOP("Workbench", "&Path"),
                    QT_TRANSLATE_NOOP("Workbench", "Specialty Operations"),
                ],
                specialcmdlist,
            )
        if extracmdlist:
            self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&Path")],
                            extracmdlist)

        self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&Path")],
                        ["Separator"])
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&Path"),
                QT_TRANSLATE_NOOP("Workbench", "Utils"),
            ],
            ["Path_PropertyBag"],
        )

        self.dressupcmds = dressupcmdlist

        curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
        if curveAccuracy:
            Path.Area.setDefaultParams(Accuracy=curveAccuracy)

        # keep this one the last entry in the preferences
        import PathScripts.PathPreferencesAdvanced as PathPreferencesAdvanced
        from PathScripts.PathPreferences import preferences

        FreeCADGui.addPreferencePage(
            PathPreferencesAdvanced.AdvancedPreferencesPage, "Path")
        Log("Loading Path workbench... done\n")

        # Warn user if current schema doesn't use minute for time in velocity
        if not PathPreferences.suppressVelocity():
            velString = FreeCAD.Units.Quantity(
                1, FreeCAD.Units.Velocity).getUserPreferred()[2][3:]

            if velString != "min":
                current_schema = FreeCAD.Units.listSchemas(
                    FreeCAD.Units.getSchema())

                msg = translate(
                    "Path",
                    f"The currently selected unit schema: \n     '{current_schema}'\n Does not use 'minutes' for velocity values. \n \nCNC machines require feed rate to be expressed in \nunit/minute. To ensure correct gcode: \nSelect a minute-based schema in preferences.\nFor example:\n    'Metric, Small Parts & CNC'\n    'US Customary'\n    'Imperial Decimal'",
                )
                header = translate("Path", "Warning")
                msgbox = QtGui.QMessageBox(QtGui.QMessageBox.Warning, header,
                                           msg)

                msgbox.addButton(translate("Path", "Ok"),
                                 QtGui.QMessageBox.AcceptRole)
                msgbox.addButton(translate("Path", "Don't Show This Anymore"),
                                 QtGui.QMessageBox.ActionRole)
                if msgbox.exec_() == 1:
                    preferences().SetBool("WarningSuppressVelocity", True)