def run(self):
"""Run the simulation:
if beginning from a blank state, then will use h.run(),
if continuing from the saved state, then will use h.continuerun()
"""
for mod in self._sim_mods:
if isinstance(mod, mods.ClampReport):
if mod.variable == "se":
mod.initialize(self, self._seclamps)
elif mod.variable == "ic":
mod.initialize(self, self._iclamps)
elif mod.variable == "f_ic":
mod.initialize(self, self._f_iclamps)
else:
mod.initialize(self)
self.start_time = h.startsw()
s_time = time.time()
pc.timeout(0)
pc.barrier() # wait for all hosts to get to this point
io.log_info('Running simulation for {:.3f} ms with the time step {:.3f} ms'.format(self.tstop, self.dt))
io.log_info('Starting timestep: {} at t_sim: {:.3f} ms'.format(self.tstep, h.t))
io.log_info('Block save every {} steps'.format(self.nsteps_block))
if self._start_from_state:
h.continuerun(h.tstop)
else:
h.run(h.tstop) # <- runs simuation: works in parallel
pc.barrier()
for mod in self._sim_mods:
mod.finalize(self)
pc.barrier()
end_time = time.time()
sim_time = self.__elapsed_time(end_time - s_time)
io.log_info('Simulation completed in {} '.format(sim_time))
def from_config(cls, config, network, set_recordings=True):
# TODO: convert from json to sonata config if necessary
sim = cls(network=network,
dt=config.dt,
tstop=config.tstop,
v_init=config.v_init,
celsius=config.celsius,
cao0=config.cao0,
optocell=config.optocell,
nsteps_block=config.block_step)
network.io.log_info('Building cells.')
network.build_nodes()
network.io.log_info('Building recurrent connections')
network.build_recurrent_edges()
# TODO: Need to create a gid selector
for sim_input in inputs.from_config(config):
node_set = network.get_node_set(sim_input.node_set)
if sim_input.input_type == 'spikes':
spikes = spike_trains.SpikesInput.load(
name=sim_input.name,
module=sim_input.module,
input_type=sim_input.input_type,
params=sim_input.params)
io.log_info('Build virtual cell stimulations for {}'.format(
sim_input.name))
network.add_spike_trains(spikes, node_set)
elif sim_input.module == 'IClamp':
# TODO: Parse from csv file
amplitude = sim_input.params['amp']
delay = sim_input.params['delay']
duration = sim_input.params['duration']
gids = sim_input.params['node_set']
sim.attach_current_clamp(amplitude, delay, duration, node_set)
elif sim_input.module == 'xstim':
sim.add_mod(mods.XStimMod(**sim_input.params))
else:
io.log_exception('Can not parse input format {}'.format(
sim_input.name))
if config.calc_ecp:
for gid, cell in network.cell_type_maps('biophysical').items():
cell.setup_ecp()
sim.h.cvode.use_fast_imem(1)
# Parse the "reports" section of the config and load an associated output module for each report
sim_reports = reports.from_config(config)
for report in sim_reports:
if isinstance(report, reports.SpikesReport):
mod = mods.SpikesMod(**report.params)
elif isinstance(report, reports.SectionReport):
mod = mods.SectionReport(**report.params)
elif isinstance(report, reports.MembraneReport):
if report.params['sections'] == 'soma':
mod = mods.SomaReport(**report.params)
else:
mod = mods.MembraneReport(**report.params)
elif isinstance(report, reports.ECPReport):
assert config.calc_ecp
mod = mods.EcpMod(**report.params)
# Set up the ability for ecp on all relevant cells
# TODO: According to spec we need to allow a different subset other than only biophysical cells
# for gid, cell in network.cell_type_maps('biophysical').items():
# cell.setup_ecp()
elif report.module == 'save_synapses':
mod = mods.SaveSynapses(**report.params)
else:
# TODO: Allow users to register customized modules using pymodules
io.log_warning('Unrecognized module {}, skipping.'.format(
report.module))
continue
sim.add_mod(mod)
return sim
def from_config(cls, config, network, set_recordings=True):
# TODO: convert from json to sonata config if necessary
#The network must be built before initializing the simulator because
#gap junctions must be set up before the simulation is initialized.
network.io.log_info('Building cells.')
network.build_nodes()
network.io.log_info('Building recurrent connections')
network.build_recurrent_edges()
sim = cls(network=network,
dt=config.dt,
tstop=config.tstop,
v_init=config.v_init,
celsius=config.celsius,
nsteps_block=config.block_step)
# TODO: Need to create a gid selector
for sim_input in inputs.from_config(config):
try:
network.get_node_set(sim_input.node_set)
except:
print(
"Parameter node_set must be given in inputs module of simulation_config file. If unsure of what node_set should be, set it to 'all'."
)
node_set = network.get_node_set(sim_input.node_set)
if sim_input.input_type == 'spikes':
io.log_info('Building virtual cell stimulations for {}'.format(
sim_input.name))
path = sim_input.params['input_file']
spikes = SpikeTrains.load(path=path,
file_type=sim_input.module,
**sim_input.params)
network.add_spike_trains(spikes, node_set)
elif sim_input.module == "FileIClamp":
sim.attach_file_current_clamp(sim_input.params["input_file"])
elif sim_input.module == 'IClamp':
# TODO: Parse from csv file
try:
len(sim_input.params['amp'])
except:
sim_input.params['amp'] = [float(sim_input.params['amp'])]
if len(sim_input.params['amp']) > 1:
sim_input.params['amp'] = [
float(i) for i in sim_input.params['amp']
]
try:
len(sim_input.params['delay'])
except:
sim_input.params['delay'] = [
float(sim_input.params['delay'])
]
if len(sim_input.params['delay']) > 1:
sim_input.params['delay'] = [
float(i) for i in sim_input.params['delay']
]
try:
len(sim_input.params['duration'])
except:
sim_input.params['duration'] = [
float(sim_input.params['duration'])
]
if len(sim_input.params['duration']) > 1:
sim_input.params['duration'] = [
float(i) for i in sim_input.params['duration']
]
amplitude = sim_input.params['amp']
delay = sim_input.params['delay']
duration = sim_input.params['duration']
try:
sim_input.params['gids']
except:
sim_input.params['gids'] = None
if sim_input.params['gids'] is not None:
gids = sim_input.params['gids']
else:
gids = list(node_set.gids())
sim.attach_current_clamp(amplitude, delay, duration, gids)
elif sim_input.module == "SEClamp":
try:
len(sim_input.params['amps'])
except:
sim_input.params['amps'] = [
float(sim_input.params['amps'])
]
try:
len(sim_input.params['durations'])
except:
sim_input.params['durations'] = [
float(sim_input.params['durations'])
]
amplitudes = sim_input.params['amps']
durations = sim_input.params['durations']
rs = None
if "rs" in sim_input.params.keys():
try:
len(sim_input.params['rs'])
except:
sim_input.params['rs'] = [
float(sim_input.params['rs'])
]
if len(sim_input.params['rs']) > 1:
sim_input.params['rs'] = [
float(i) for i in sim_input.params['rs']
]
rs = sim_input.params["rs"]
try:
sim_input.params['gids']
except:
sim_input.params['gids'] = None
if sim_input.params['gids'] is not None:
gids = sim_input.params['gids']
else:
gids = list(node_set.gids())
sim.attach_se_voltage_clamp(amplitudes, durations, gids, rs)
elif sim_input.module == 'xstim':
sim.add_mod(mods.XStimMod(**sim_input.params))
else:
io.log_exception('Can not parse input format {}'.format(
sim_input.name))
# Parse the "reports" section of the config and load an associated output module for each report
sim_reports = reports.from_config(config)
for report in sim_reports:
if isinstance(report, reports.SpikesReport):
mod = mods.SpikesMod(**report.params)
elif report.module == 'netcon_report':
mod = mods.NetconReport(**report.params)
elif isinstance(report, reports.MembraneReport):
if report.params['sections'] == 'soma':
mod = mods.SomaReport(**report.params)
else:
mod = mods.MembraneReport(**report.params)
elif isinstance(report, reports.ClampReport):
mod = mods.ClampReport(**report.params)
elif isinstance(report, reports.ECPReport):
mod = mods.EcpMod(**report.params)
# Set up the ability for ecp on all relevant cells
# TODO: According to spec we need to allow a different subset other than only biophysical cells
for gid, cell in network.cell_type_maps('biophysical').items():
cell.setup_ecp()
elif report.module == 'save_synapses':
mod = mods.SaveSynapses(**report.params)
else:
# TODO: Allow users to register customized modules using pymodules
io.log_warning('Unrecognized module {}, skipping.'.format(
report.module))
continue
sim.add_mod(mod)
return sim
def _activate_hln(self, sim, block_interval, firing_rate):
block_length = sim.nsteps_block * sim.dt / 1000.0
next_block_tstart = (block_interval[1] +
1) * sim.dt / 1000.0 # The next time-step
next_block_tstop = next_block_tstart + block_length # The time-step when the next block ends
# This is where you can use the firing-rate of the low-level neurons to generate a set of spike times for the
# next block
if firing_rate > 0.0:
psg = PoissonSpikeGenerator()
# # Use homogeneous input
# psg.add(node_ids=[0], firing_rate=firing_rate, times=(next_block_tstart, next_block_tstop)) # sec
# spikes = psg.get_times([0])*1000 # convert sec to ms
# n_spikes = len(spikes)
# io.log_info(' _activate_hln firing rate: {:.2f} Hz'.format(n_spikes/block_length))
# if n_spikes > 0:
# # Update firing rate of bladder afferent neurons
# for gid in self._high_level_neurons:
# self._spike_events[gid] = np.concatenate((self._spike_events[gid],spikes))
# nc = self._netcons[gid]
# for t in spikes:
# nc.event(t)
# io.log_info('Last spike: {:.1f} ms'.format(spikes[-1]))
# Use inhomogeneous input
n = len(self._high_level_neurons)
psg.add(node_ids=self._high_level_neurons,
firing_rate=firing_rate,
times=(next_block_tstart, next_block_tstop))
n_spikes = np.zeros(n)
last_spike = 0.0
for i, gid in enumerate(self._high_level_neurons):
spikes = psg.get_times(gid) * 1000
n_spikes[i] = len(spikes)
if n_spikes[i] > 0:
self._spike_events[gid] = np.concatenate(
(self._spike_events[gid], spikes))
nc = self._netcons[gid]
for t in spikes:
nc.event(t)
last_spike = max(last_spike, spikes[-1])
io.log_info(
' _activate_hln firing rate: ' +
','.join(["%.2f" % (ns / block_length)
for ns in n_spikes]) + ' Hz')
if last_spike > 0:
io.log_info('Last spike: {:.1f} ms'.format(last_spike))
else:
io.log_info(' _activate_hln firing rate: 0')
# If pressure is maxxed, update firing rate of EUS motor neurons
# Guarding reflex
# press_change = self._prev_glob_press - self._glob_press
# if self._glob_press > press_thres or press_change > change_thres:
# psg = PoissonSpikeGenerator()
# eus_fr = self._glob_press*10 + press_change*10 # Assumption: guarding reflex
# # depends on current pressure
# # and change from last pressure
# psg.add(node_ids=[0], firing_rate=eus_fr, times=(next_block_tstart, next_block_tstop))
# self._spike_events = psg.get_times(0)
# for gid in self._eus_neurons:
# nc = self._netcons[gid]
# for t in self._spike_events:
# nc.event(t)
################ Activate higher order based on pressure threshold ##############################
# if block_interval[1] % 2000 == 1000: # For fast testing, only add events to every other block
# if False: # For testing
# if self._glob_press > self.press_thres:
# io.log_info(' updating pag input')
# psg = PoissonSpikeGenerator()
# print(self.press_thres)
#
# pag_fr = self.press_thres #change
# psg.add(node_ids=[0], firing_rate=pag_fr, times=(next_block_tstart/1000.0, next_block_tstop/1000.0))
# if psg.n_spikes() <= 0:
# io.log_info(' no psg spikes generated by Poisson distritubtion')
# self._spike_events = psg.get_times(0)
# for gid in self._pag_neurons:
# nc = self._netcons[gid]
# for t in self._spike_events:
# nc.event(t)
################ Activate higher order based on afferent firing rate ##############################
if firing_rate > 10:
pag_fr = 15
psg = PoissonSpikeGenerator()
# # Use homogeneous input
# psg.add(node_ids=[0], firing_rate=pag_fr, times=(next_block_tstart, next_block_tstop))
# spikes = psg.get_times([0])*1000
# n_spikes = len(spikes)
# io.log_info(' pag firing rate: {:.2f} Hz'.format(n_spikes/block_length))
# if n_spikes>0:
# io.log_info('Last spike: {:.1f} ms'.format(spikes[-1]))
# for gid in self._pag_neurons:
# self._spike_events[gid] = np.concatenate((self._spike_events[gid],spikes))
# nc = self._netcons[gid]
# for t in spikes:
# nc.event(t)
# Use inhomogeneous input
n = len(self._pag_neurons)
psg.add(node_ids=self._pag_neurons,
firing_rate=pag_fr,
times=(next_block_tstart, next_block_tstop))
n_spikes = np.zeros(n)
last_spike = 0.0
for i, gid in enumerate(self._pag_neurons):
spikes = psg.get_times(gid) * 1000
n_spikes[i] = len(spikes)
if n_spikes[i] > 0:
self._spike_events[gid] = np.concatenate(
(self._spike_events[gid], spikes))
nc = self._netcons[gid]
for t in spikes:
nc.event(t)
last_spike = max(last_spike, spikes[-1])
io.log_info(
' pag firing rate: ' +
','.join(["%.2f" % (ns / block_length)
for ns in n_spikes]) + ' Hz')
if last_spike > 0:
io.log_info('Last spike: {:.1f} ms'.format(last_spike))
io.log_info('\n')
def block(self, sim, block_interval):
"""This function is called every n steps during the simulation, as set in the config.json file (run/nsteps_block).
We can use this to get the firing rate of PGN during the last block and use it to calculate
firing rate for bladder afferent neuron
"""
# Calculate the avg number of spikes per neuron
block_length = sim.nsteps_block * sim.dt / 1000.0 # time length of previous block of simulation TODO: precalcualte /1000
n_gids = 0
n_spikes = 0
for gid, tvec in self._spike_records.items():
n_gids += 1
n_spikes += len(
list(tvec)
) # use tvec generator. Calling this deletes the values in tvec
# Calculate the firing rate the the low-level neuron(s)
avg_spikes = n_spikes / (float(n_gids) * 1.0)
fr = avg_spikes / float(block_length)
# Grill function for polynomial fit according to PGN firing rate
# Grill, et al. 2016
def pgn_fire_rate(x):
f = 2.0E-03 * x**3 - 3.3E-02 * x**2 + 1.8 * x - 0.5
f = max(f, 0.0)
return f
# Grill function for polynomial fit according to bladder volume
# Grill, et al. 2016
def blad_vol(vol):
f = 1.5 * 20 * vol - 10 #1.5*20*vol-10
return f
# Grill function returning pressure in units of cm H20
# Grill, et al. 2016
def pressure(fr, v):
p = 0.2 * fr + 1.0 * v
p = max(p, 0.0)
return p
# Grill function returning bladder afferent firing rate in units of Hz
# Grill, et al. 2016
def blad_aff_fr(p):
fr1 = -3.0E-08 * p**5 + 1.0E-5 * p**4 - 1.5E-03 * p**3 + 7.9E-02 * p**2 - 0.6 * p
fr1 = max(fr1, 0.0)
return fr1 # Using scaling factor of 5 here to get the correct firing rate range
# Calculate bladder volume using Grill's polynomial fit equation
v_init = 0.05 # TODO: get biological value for initial bladder volume
fill = 0.05 # ml/min (Asselt et al. 2017)
fill /= (1000 * 60) # Scale from ml/min to ml/ms
void = 4.6 # ml/min (Streng et al. 2002)
void /= (1000 * 60) # Scale from ml/min to ml/ms
max_v = 1.5 # ml (Grill et al. 2019) #0.76
vol = v_init
# Update blad aff firing rate
t = sim.h.t - block_length * 1000.0
PGN_fr = pgn_fire_rate(fr)
# Filling: 0 - 7000 ms
# if t < 7000 and vol < max_v:
# vol = fill*t*150 + v_init
# Filling: 0 - 54000 ms
if t < 60000 and vol < max_v:
vol = fill * t * 20 + v_init
# # Voiding: 7000 - 10,000 ms
# else:
# vol = max_v - void*(10000-t)*100
# Voiding: 54000 - 60000 ms
# else:
# vol = max_v - void*(60000-t)*100
# Maintain minimum volume
if vol < v_init:
vol = v_init
grill_vol = blad_vol(vol)
# Calculate pressure using Grill equation
p = pressure(PGN_fr, grill_vol)
# Update global pressure (to be used to determine if EUS motor
# needs to be updated for guarding reflex)
self._prev_glob_press = self._glob_press
self._glob_press = p
# Calculate bladder afferent firing rate using Grill equation
bladaff_fr = blad_aff_fr(p)
io.log_info('PGN firing rate = %.2f Hz' % fr)
io.log_info('Volume = %.2f ml' % vol)
io.log_info('Pressure = %.2f cm H20' % p)
io.log_info(
'Bladder afferent firing rate = {:.2f} Hz'.format(bladaff_fr))
# Save values in appropriate lists
self.times.append(t)
self.b_vols.append(vol)
self.b_pres.append(p)
# b_aff.append(bladaff_fr)
# pgn_fir.append(fr)
# Set the activity of high-level neuron
self._activate_hln(sim, block_interval, bladaff_fr)
# NEURON requires resetting NetCon.record() every time we read the tvec.
pc.barrier()
self._set_spike_detector(sim)
def from_config(cls, config, network, set_recordings=True):
simulation_inputs = inputs.from_config(config)
# Special case for setting synapses to spontaneously (for a given set of pre-synaptic cell-types). Using this
# input will change the way the network builds cells/connections and thus needs to be set first.
for sim_input in simulation_inputs:
if sim_input.input_type == 'syn_activity':
network.set_spont_syn_activity(
precell_filter=sim_input.params['precell_filter'],
timestamps=sim_input.params['timestamps']
)
# The network must be built before initializing the simulator because
# gap junctions must be set up before the simulation is initialized.
network.io.log_info('Building cells.')
network.build_nodes()
network.io.log_info('Building recurrent connections')
network.build_recurrent_edges()
sim = cls(network=network,
dt=config.dt,
tstop=config.tstop,
v_init=config.v_init,
celsius=config.celsius,
nsteps_block=config.block_step)
# TODO: Need to create a gid selector
for sim_input in inputs.from_config(config):
try:
network.get_node_set(sim_input.node_set)
except:
print("Parameter node_set must be given in inputs module of simulation_config file. If unsure of what node_set should be, set it to 'all'.")
node_set = network.get_node_set(sim_input.node_set)
if sim_input.input_type == 'spikes':
io.log_info('Building virtual cell stimulations for {}'.format(sim_input.name))
path = sim_input.params['input_file']
spikes = SpikeTrains.load(path=path, file_type=sim_input.module, **sim_input.params)
network.add_spike_trains(spikes, node_set)
elif sim_input.module == "FileIClamp":
sim.attach_file_current_clamp(sim_input.params["input_file"])
elif sim_input.module == 'IClamp':
# TODO: Parse from csv file
try:
len(sim_input.params['amp'])
except:
sim_input.params['amp']=[float(sim_input.params['amp'])]
if len(sim_input.params['amp'])>1:
sim_input.params['amp']=[float(i) for i in sim_input.params['amp']]
try:
len(sim_input.params['delay'])
except:
sim_input.params['delay']=[float(sim_input.params['delay'])]
if len(sim_input.params['delay'])>1:
sim_input.params['delay']=[float(i) for i in sim_input.params['delay']]
try:
len(sim_input.params['duration'])
except:
sim_input.params['duration']=[float(sim_input.params['duration'])]
if len(sim_input.params['duration'])>1:
sim_input.params['duration']=[float(i) for i in sim_input.params['duration']]
amplitude = sim_input.params['amp']
delay = sim_input.params['delay']
duration = sim_input.params['duration']
# specificed for location to place iclamp hobj.<section_name>[<section_index>](<section_dist>). The
# default is hobj.soma[0](0.5), the center of the soma
section_name = sim_input.params.get('section_name', 'soma')
section_index = sim_input.params.get('section_index', 0)
section_dist = sim_input.params.get('section_dist', 0.5)
# section_name = section_name if isinstance(section_name, (list, tuple)) else [section_name]
# section_index = section_index if isinstance(section_index, (list, tuple)) else [section_index]
# section_dist = section_dist if isinstance(section_dist, (list, tuple)) else [section_dist]
try:
sim_input.params['gids']
except:
sim_input.params['gids'] = None
if sim_input.params['gids'] is not None:
gids = sim_input.params['gids']
else:
gids = list(node_set.gids())
sim.attach_current_clamp(amplitude, delay, duration, gids, section_name, section_index, section_dist)
elif sim_input.module == "SEClamp":
try:
len(sim_input.params['amps'])
except:
sim_input.params['amps']=[float(sim_input.params['amps'])]
try:
len(sim_input.params['durations'])
except:
sim_input.params['durations']=[float(sim_input.params['durations'])]
amplitudes = sim_input.params['amps']
durations = sim_input.params['durations']
rs = None
if "rs" in sim_input.params.keys():
try:
len(sim_input.params['rs'])
except:
sim_input.params['rs']=[float(sim_input.params['rs'])]
if len(sim_input.params['rs'])>1:
sim_input.params['rs']=[float(i) for i in sim_input.params['rs']]
rs = sim_input.params["rs"]
try:
sim_input.params['gids']
except:
sim_input.params['gids'] = None
if sim_input.params['gids'] is not None:
gids = sim_input.params['gids']
else:
gids = list(node_set.gids())
sim.attach_se_voltage_clamp(amplitudes, durations, gids, rs)
elif sim_input.module == 'xstim':
sim.add_mod(mods.XStimMod(**sim_input.params))
elif sim_input.module == 'syn_activity':
pass
else:
io.log_exception('Can not parse input format {}'.format(sim_input.name))
# Parse the "reports" section of the config and load an associated output module for each report
sim_reports = reports.from_config(config)
for report in sim_reports:
if isinstance(report, reports.SpikesReport):
mod = mods.SpikesMod(**report.params)
elif report.module == 'netcon_report':
mod = mods.NetconReport(**report.params)
elif isinstance(report, reports.MembraneReport):
if report.params['sections'] == 'soma':
mod = mods.SomaReport(**report.params)
else:
mod = mods.MembraneReport(**report.params)
elif isinstance(report, reports.ClampReport):
mod = mods.ClampReport(**report.params)
elif isinstance(report, reports.ECPReport):
mod = mods.EcpMod(**report.params)
# Set up the ability for ecp on all relevant cells
# TODO: According to spec we need to allow a different subset other than only biophysical cells
for gid, cell in network.cell_type_maps('biophysical').items():
cell.setup_ecp()
elif report.module == 'save_synapses':
mod = mods.SaveSynapses(**report.params)
else:
# TODO: Allow users to register customized modules using pymodules
io.log_warning('Unrecognized module {}, skipping.'.format(report.module))
continue
sim.add_mod(mod)
return sim
def __del__(self):
io.log_info('Cleaning up simulation.')
def _activate_hln(self, sim, block_interval, firing_rate):
next_block_tstart = (block_interval[1] +
1) * sim.dt # The next time-step
next_block_tstop = next_block_tstart + sim.nsteps_block * sim.dt # The time-step when the next block ends
# This is where you can use the firing-rate of the low-level neurons to generate a set of spike times for the
# next block
if firing_rate != 0.0:
psg = PoissonSpikeGenerator()
psg.add(node_ids=[0],
firing_rate=firing_rate,
times=(next_block_tstart, next_block_tstop))
if psg.n_spikes() <= 0:
io.log_info(
' _activate_hln: firing rate {} did not produce any spikes'
.format(firing_rate))
else:
self._spike_events = psg.get_times(0)
# Update firing rate of bladder afferent neurons
for gid in self._high_level_neurons:
nc = self._netcons[gid]
for t in self._spike_events:
nc.event(t)
else:
io.log_info(' _activate_hln: firing rate 0')
# If pressure is maxxed, update firing rate of EUS motor neurons
# Guarding reflex
# press_change = self._prev_glob_press - self._glob_press
# if self._glob_press > press_thres or press_change > change_thres:
# psg = PoissonSpikeGenerator()
# eus_fr = self._glob_press*10 + press_change*10 # Assumption: guarding reflex
# # depends on current pressure
# # and change from last pressure
# psg.add(node_ids=[0], firing_rate=eus_fr, times=(next_block_tstart, next_block_tstop))
# self._spike_events = psg.get_times(0)
# for gid in self._eus_neurons:
# nc = self._netcons[gid]
# for t in self._spike_events:
# nc.event(t)
################ Activate higher order based on pressure threshold ##############################
# if block_interval[1] % 2000 == 1000: # For fast testing, only add events to every other block
# if False: # For testing
if self._glob_press > press_thres:
io.log_info(' updating pag input')
psg = PoissonSpikeGenerator()
print(press_thres)
pag_fr = press_thres #change
psg.add(node_ids=[0],
firing_rate=pag_fr,
times=(next_block_tstart / 1000.0,
next_block_tstop / 1000.0))
if psg.n_spikes() <= 0:
io.log_info(
' no psg spikes generated by Poisson distritubtion')
self._spike_events = psg.get_times(0)
for gid in self._pag_neurons:
nc = self._netcons[gid]
for t in self._spike_events:
nc.event(t)
def initialize(self, sim):
network = sim.net
##### Make sure to save spikes vector and vector stim object
# Attach a NetCon/synapse on the high-level neuron(s) soma. We can use the NetCon.event(time) method to send
# a spike to the synapse. Which, is a spike occurs, the high-level neuron will inhibit the low-level neuron.
self._spikes = h.Vector(np.array([])) # start off with empty input
vec_stim = h.VecStim()
vec_stim.play(self._spikes)
self._vect_stim = vec_stim
self._high_level_neurons = list(
sim.net.get_node_set('high_level_neurons').gids())
self._pag_neurons = list(sim.net.get_node_set('pag_neurons').gids())
# self._pag_neurons = [i for i in np.arange(50,75)]
for gid in self._high_level_neurons:
cell = sim.net.get_cell_gid(gid)
# Create synapse
# These values will determine how the high-level neuron behaves with the input
new_syn = h.Exp2Syn(0.5, cell.hobj.soma[0])
new_syn.e = 0.0
new_syn.tau1 = 0.1
new_syn.tau2 = 0.3
nc = h.NetCon(self._vect_stim, new_syn)
##nc = h.NetCon(vec_stim, new_syn)
nc.weight[0] = 0.5
nc.delay = 1.0
self._synapses[gid] = new_syn
self._netcons[gid] = nc
io.log_info('Found {} PAG neurons'.format(len(self._pag_neurons)))
for gid in self._pag_neurons:
trg_cell = network.get_cell_gid(
gid) # network._rank_node_ids['LUT'][51]
syn = h.Exp2Syn(0.5, sec=trg_cell.hobj.soma[0])
syn.e = 0.0
syn.tau1 = 0.1
syn.tau2 = 0.3
self._synapses[gid] = syn
nc = h.NetCon(self._vect_stim, syn)
nc.weight[0] = 0.5
nc.delay = 1.0
self._netcons[gid] = nc
# Attach another netcon to the low-level neuron(s) that will record
self._low_level_neurons = list(
sim.net.get_node_set('low_level_neurons').gids())
for gid in self._low_level_neurons:
cell = sim.net.get_cell_gid(gid)
# NOTE: If you set the segment to 0.5 it will interfere with the record_spikes module. Neuron won't let
# us record from the same place multiple times, so for now just set to 0.0. TODO: read and save spikes in biosimulator.
nc = h.NetCon(cell.hobj.soma[0](0.0)._ref_v,
None,
sec=cell.hobj.soma[0])
self._netcons[gid] = nc
self._set_spike_detector(sim)
