def input(label, is_password=False, answers=None, default=None):
"""
Input loop. (like raw_input, but nice colored.)
'answers' can be either None or a list of the accepted answers.
"""
def print_question():
answers_str = (' [%s]' % (','.join(answers)) if answers else '')
default_str = (' (default=%s)' % default if default else '')
sys.stdout.write(
colored(' %s%s%s: ' % (label, answers_str, default_str), 'cyan'))
sys.stdout.flush()
def read_answer():
value = ''
print_question()
while True:
c = sys.stdin.read(1)
# Enter pressed
if c in ('\r', '\n') and (value or default):
sys.stdout.write('\r\n')
break
# Backspace pressed
elif c == '\x7f' and value:
sys.stdout.write('\b \b')
value = value[:-1]
# Valid character
elif ord(c) in range(32, 127):
sys.stdout.write(
colored('*' if is_password else c, attrs=['bold']))
value += c
elif c == '\x03': # Ctrl-C
raise NoInput
sys.stdout.flush()
# Return result
if not value and default:
return default
else:
return value
with std.raw_mode(sys.stdin):
while True:
value = read_answer()
# Return if valid anwer
if not answers or value in answers:
return value
# Otherwise, ask again.
else:
sys.stdout.write('Invalid answer.\r\n')
sys.stdout.flush()
def input(label, is_password=False, answers=None, default=None):
"""
Input loop. (like raw_input, but nice colored.)
'answers' can be either None or a list of the accepted answers.
"""
def print_question():
answers_str = " [%s]" % (",".join(answers)) if answers else ""
default_str = " (default=%s)" % default if default else ""
sys.stdout.write(colored(" %s%s%s: " % (label, answers_str, default_str), "cyan"))
sys.stdout.flush()
def read_answer():
value = ""
print_question()
while True:
c = sys.stdin.read(1)
# Enter pressed
if c in ("\r", "\n") and (value or default):
sys.stdout.write("\r\n")
break
# Backspace pressed
elif c == "\x7f" and value:
sys.stdout.write("\b \b")
value = value[:-1]
# Valid character
elif ord(c) in range(32, 127):
sys.stdout.write(colored("*" if is_password else c, attrs=["bold"]))
value += c
elif c == "\x03": # Ctrl-C
raise NoInput
sys.stdout.flush()
# Return result
if not value and default:
return default
else:
return value
with std.raw_mode(sys.stdin):
while True:
value = read_answer()
# Return if valid anwer
if not answers or value in answers:
return value
# Otherwise, ask again.
else:
sys.stdout.write("Invalid answer.\r\n")
sys.stdout.flush()
def cmdloop(self):
try:
while True:
with raw_mode(self.stdin):
result = self.read().strip()
if result:
self.lines_history.append(result)
self.history_position = 0
self.handle([ p for p in result.split(' ') if p ])
except ExitCLILoop, e:
print # Print newline
return e.result
def lesspipe(self, line_iterator):
"""
Paginator for output. This will print one page at a time. When the user
presses a key, the next page is printed. ``Ctrl-c`` or ``q`` will quit
the paginator.
:param line_iterator: A generator function that yields lines (without
trailing newline)
"""
stdin = self._pty.stdin
stdout = self._pty.stdout
height = self._pty.get_size()[0] - 1
with std.raw_mode(stdin):
lines = 0
for l in line_iterator:
# Print next line
stdout.write(l)
stdout.write('\r\n')
lines += 1
# When we are at the bottom of the terminal
if lines == height:
# Wait for the user to press enter.
stdout.write(colored(' Press enter to continue...', 'cyan'))
stdout.flush()
try:
c = stdin.read(1)
# Control-C or 'q' will quit pager.
if c in ('\x03', 'q'):
stdout.write('\r\n')
stdout.flush()
return
except IOError:
# Interupted system call.
pass
# Move backwards and erase until the end of the line.
stdout.write('\x1b[40D\x1b[K')
lines = 0
stdout.flush()
def cmdloop(self):
try:
while True:
# Set handler for resize terminal events.
self.pty.set_ssh_channel_size = lambda: self.print_command()
# Read command
with raw_mode(self.stdin):
result = self.read().strip()
self.pty.set_ssh_channel_size = None
# Handle result
if result:
self.lines_history.append(result)
self.history_position = 0
self.handle([p for p in result.split(' ') if p])
except ExitCLILoop, e:
print # Print newline
return e.result
def cmdloop(self):
try:
while True:
# Set handler for resize terminal events.
self.pty.set_ssh_channel_size = lambda: self.print_command()
# Read command
with raw_mode(self.stdin):
result = self.read().strip()
self.pty.set_ssh_channel_size = None
# Handle result
if result:
self.lines_history.append(result)
self.history_position = 0
self.handle([ p for p in result.split(' ') if p ])
except ExitCLILoop, e:
print # Print newline
return e.result
def lesspipe(line_iterator, pty):
"""
Paginator for output.
"""
height = pty.get_size()[0] - 1
with std.raw_mode(sys.stdin):
lines = 0
for l in line_iterator:
# Print next line
sys.stdout.write(l)
sys.stdout.write('\r\n')
lines += 1
# When we are at the bottom of the terminal
if lines == height:
# Wait for the user to press enter.
sys.stdout.write(
colored(' Press enter to continue...', 'cyan'))
sys.stdout.flush()
try:
c = sys.stdin.read(1)
# Control-C or 'q' will quit pager.
if c in ('\x03', 'q'):
sys.stdout.write('\r\n')
sys.stdout.flush()
return
except IOError, e:
# Interupted system call.
pass
# Move backwards and erase until the end of the line.
sys.stdout.write('\x1b[40D\x1b[K')
lines = 0
sys.stdout.flush()
def lesspipe(line_iterator, pty):
"""
Paginator for output.
"""
height = pty.get_size()[0] - 1
with std.raw_mode(sys.stdin):
lines = 0
for l in line_iterator:
# Print next line
sys.stdout.write(l)
sys.stdout.write("\r\n")
lines += 1
# When we are at the bottom of the terminal
if lines == height:
# Wait for the user to press enter.
sys.stdout.write(colored(" Press enter to continue...", "cyan"))
sys.stdout.flush()
try:
c = sys.stdin.read(1)
# Control-C or 'q' will quit pager.
if c in ("\x03", "q"):
sys.stdout.write("\r\n")
sys.stdout.flush()
return
except IOError, e:
# Interupted system call.
pass
# Move backwards and erase until the end of the line.
sys.stdout.write("\x1b[40D\x1b[K")
lines = 0
sys.stdout.flush()
def __call__(self, context):
# Real stdin/out of the current logging session
stdin = context.cli.stdin
stdout = context.cli.stdout
# Use a pseudo terminal to pass the logging IO from other deployment
# sessions to this one.
master, slave = os.openpty()
slave_stdout = os.fdopen(slave, 'w', 0)
master_stdin = os.fdopen(master, 'r', 0)
fdesc.setNonBlocking(master_stdin)
def now():
return datetime.datetime.now().strftime('%H:%I:%S')
# Create monitor handler
class M(Monitor):
def __init__(self):
self.line = 0 # Keep line numbers
slave_stdout.write("Press 'q' or Ctrl-c to exit the monitor\n")
slave_stdout.write(colored('%-12s' % 'Username', 'cyan'))
slave_stdout.write(colored('%-9s' % 'Time', 'cyan'))
slave_stdout.write(colored('%-17s' % 'Host', 'cyan'))
slave_stdout.write(colored('%s' % 'Command', 'cyan'))
slave_stdout.write('\n')
slave_stdout.flush()
def _print_username(self, username):
slave_stdout.write(colored('%-12s' % username, 'magenta'))
slave_stdout.write(colored('%-9s' % now()))
def _print_user_and_event(self, username, event):
self._print_username(username)
slave_stdout.write(' '*17 + event)
slave_stdout.flush()
def _print_status(self, line, succeeded):
slave_stdout.write('\0337') # ESC 7: Save cursor position
slave_stdout.write('\033[%iA' % (self.line-line)) # Move cursor up
slave_stdout.write('\033[1000C') # Move cursor to end of line
slave_stdout.write('\033[8D') # Move cursor 8 chars back
if succeeded:
slave_stdout.write(colored('succeeded', 'green'))
else:
slave_stdout.write(colored('failed', 'red'))
slave_stdout.write('\0338') # ESC 8: Restore cursor position
def log_run(self, session, run):
if not run.sandboxing:
line = self.line
self._print_username(session.username)
slave_stdout.write(colored('%-17s' % run.host.slug, 'cyan'))
slave_stdout.write(colored('%s' % (' (sudo) ' if run.use_sudo else ''), 'red'))
slave_stdout.write(colored(run.command, 'green'))
slave_stdout.write('\n')
slave_stdout.flush()
self.line += 1
# TODO: I guess these writes should be atomic (group in
# one statement), because they can come from different
# threads.
def callback():
# TODO: Make more generic. We don't want to write to
# this logger when it has been closed. It may be
# possible that the logger has been disconnected and
# removed from the globals loggers list, but the
# callback still exists.
if not slave_stdout.closed:
self._print_status(line, run.succeeded)
return callback
else:
return lambda:None
def log_file_opened(self, session, file_entry):
if not file_entry.sandboxing:
line = self.line
self._print_username(session.username)
slave_stdout.write(colored('%-17s' % file_entry.host.slug, 'cyan'))
slave_stdout.write(colored('%s' % (' (sudo) ' if file_entry.use_sudo else ''), 'red'))
if file_entry.entry_type == Actions.Get:
slave_stdout.write('Downloading: ')
slave_stdout.write(colored(file_entry.remote_path, 'green'))
elif file_entry.entry_type == Actions.Put:
slave_stdout.write('Uploading: ')
slave_stdout.write(colored(file_entry.remote_path, 'green'))
elif file_entry.entry_type == Actions.Open:
slave_stdout.write('Opening file: ')
slave_stdout.write(colored(file_entry.remote_path, 'green'))
slave_stdout.write(' mode=')
slave_stdout.write(colored(file_entry.mode, 'green'))
slave_stdout.write('\n')
slave_stdout.flush()
self.line += 1
def callback():
if not slave_stdout.closed:
self._print_status(line, file_entry.succeeded)
return callback
else:
return lambda:None
def action_started(self, session, action_entry):
line = self.line
if action_entry.sandboxing:
self._print_user_and_event(session.username, 'Calling action (in sandbox): %s\n' %
colored(action_entry.command, 'green'))
else:
self._print_user_and_event(session.username, 'Calling action: %s\n' %
colored(action_entry.command, 'green'))
class Callbacks(object):
def succeeded(s, result):
if not slave_stdout.closed:
self._print_status(line, True)
def failed(s, exception):
if not slave_stdout.closed:
self._print_status(line, False)
self.line += 1
return Callbacks()
def session_created(self, session):
self.line += 1
self._print_user_and_event(session.username,
'Started session host=%s id=%s\n' % (session.host, session.id))
def session_closed(self, session):
self.line += 1
self._print_user_and_event(session.username,
'Closed session host=%s id=%s\n' % (session.host, session.id))
monitor = M()
monitors.append(monitor)
with std.raw_mode(stdin):
while True:
r, w, e = select.select([master_stdin, stdin], [], [])
# Receive stream from monitor
if master_stdin in r:
stdout.write(master_stdin.read(4096))
if stdin in r:
char = stdin.read(1)
# Leave monitor when 'q' or Ctrl-C has been pressed.
if char in ('q', '\x03'):
# Cleanup
monitors.remove(monitor)
slave_stdout.close()
master_stdin.close()
return
def _posix_shell(self, pty, chan, raw=True, log_entry=None, initial_input=None):
"""
Create a loop which redirects sys.stdin/stdout into this channel.
The loop ends when channel.recv() returns 0.
Code inspired by the Paramiko interactive demo.
"""
result = []
password_sent = False
# Make stdin non-blocking. (The select call will already
# block for us, we want sys.stdin.read() to read as many
# bytes as possible without blocking.)
fdesc.setNonBlocking(pty.stdin)
# Set terminal in raw mode
if raw:
context = raw_mode(pty.stdin)
else:
context = contextlib.nested()
with context:
try:
chan.settimeout(0.0)
# When initial input has been given, send this first
if initial_input:
time.sleep(0.2) # Wait a very short while for the channel to be initialized, before sending.
chan.send(initial_input)
reading_from_stdin = True
# Read/write loop
while True:
# Don't wait for any input when an exit status code has been
# set already.
if chan.status_event.isSet():
break;
if reading_from_stdin:
r, w, e = select([pty.stdin, chan], [], [])
else:
r, w, e = select([chan], [], [])
# Receive stream
if chan in r:
try:
x = chan.recv(1024)
# Received length 0 -> end of stream
if len(x) == 0:
break
# Log received characters
log_entry.log_io(x)
# Write received characters to stdout and flush
while True:
try:
pty.stdout.write(x)
break
except IOError, e:
# Sometimes, when we have a lot of output, we get here:
# IOError: [Errno 11] Resource temporarily unavailable
# Just waiting a little, and retrying seems to work.
# See also: deployer.run.socket_client for a similar issue.
time.sleep(0.2)
pty.stdout.flush()
# Also remember received output.
# We want to return what's written to stdout.
result.append(x)
# Do we need to send the sudo password? (It's when the
# magic prompt has been detected in the stream) Note
# that we only monitor the last part of 'result', it's
# a bit fuzzy, but works.
if not password_sent and self.magic_sudo_prompt in ''.join(result[-32:]):
chan.send(self.password)
chan.send('\n')
password_sent = True
except socket.timeout:
pass
# Send stream (one by one character)
if pty.stdin in r:
try:
x = pty.stdin.read(1024)
# We receive \n from stdin, but \r is required to
# send. (Until now, the only place where the
# difference became clear is in redis-cli, which
# only accepts \r as confirmation.)
x = x.replace('\n', '\r')
except IOError, e:
# What to do with IOError exceptions?
# (we see what happens in the next select-call.)
continue
# Received length 0
# There's no more at stdin to read.
if len(x) == 0:
# However, we should go on processing the input
# from the remote end, until the process finishes
# there (because it was done or processed Ctrl-C or
# Ctrl-D/EOF.)
#
# The end of the input stream happens when we are
# using StringIO at the client side, and we're not
# attached to a real pseudo terminal. (For
# unit-testing, or background commands.)
reading_from_stdin = False
continue
# Write to channel
chan.send(x)
# Not sure about this. Sometimes, when pasting large data
# in the command line, the many concecutive read or write
# commands will make Paramiko hang somehow... (This was
# the case, when still using a blocking pty.stdin.read(1)
# instead of a non-blocking readmany.
time.sleep(0.01)
def input(self, label, is_password=False, answers=None, default=None):
"""
Ask for plain text input. (Similar to raw_input.)
:param is_password: Show stars instead of the actual user input.
:type is_password: bool
:param answers: A list of the accepted answers or None.
:param default: Default answer.
"""
def print_question():
answers_str = (' [%s]' % (','.join(answers)) if answers else '')
default_str = (' (default=%s)' % default if default is not None else '')
sys.stdout.write(colored(' %s%s%s: ' % (label, answers_str, default_str), 'cyan'))
sys.stdout.flush()
def read_answer():
value = ''
print_question()
while True:
c = sys.stdin.read(1)
# Enter pressed
if c in ('\r', '\n') and (value or default):
sys.stdout.write('\r\n')
break
# Backspace pressed
elif c == '\x7f' and value:
sys.stdout.write('\b \b')
value = value[:-1]
# Valid character
elif ord(c) in range(32, 127):
sys.stdout.write(colored('*' if is_password else c, attrs=['bold']))
value += c
elif c == '\x03': # Ctrl-C
raise NoInput
sys.stdout.flush()
# Return result
if not value and default is not None:
return default
else:
return value
with std.raw_mode(sys.stdin):
while True:
if self._pty.interactive:
value = read_answer()
elif default is not None:
print_question()
sys.stdout.write('[non interactive] %r\r\n' % default)
sys.stdout.flush()
value = default
else:
# XXX: Asking for input in non-interactive session
value = read_answer()
# Return if valid anwer
if not answers or value in answers:
return value
# Otherwise, ask again.
else:
sys.stdout.write('Invalid answer.\r\n')
sys.stdout.flush()
def __call__(self, context):
# Real stdin/out of the current logging session
stdin = context.cli.stdin
stdout = context.cli.stdout
# Use a pseudo terminal to pass the logging IO from other deployment
# sessions to this one.
master, slave = os.openpty()
slave_stdout = os.fdopen(slave, 'w', 0)
master_stdin = os.fdopen(master, 'r', 0)
fdesc.setNonBlocking(master_stdin)
def now():
return datetime.datetime.now().strftime('%H:%I:%S')
# Create monitor handler
class M(Monitor):
def __init__(self):
self.line = 0 # Keep line numbers
slave_stdout.write("Press 'q' or Ctrl-c to exit the monitor\n")
slave_stdout.write(colored('%-12s' % 'Username', 'cyan'))
slave_stdout.write(colored('%-9s' % 'Time', 'cyan'))
slave_stdout.write(colored('%-17s' % 'Host', 'cyan'))
slave_stdout.write(colored('%s' % 'Command', 'cyan'))
slave_stdout.write('\n')
slave_stdout.flush()
def _print_username(self, username):
slave_stdout.write(colored('%-12s' % username, 'magenta'))
slave_stdout.write(colored('%-9s' % now()))
def _print_user_and_event(self, username, event):
self._print_username(username)
slave_stdout.write(' ' * 17 + event)
slave_stdout.flush()
def _print_status(self, line, succeeded):
slave_stdout.write('\0337') # ESC 7: Save cursor position
slave_stdout.write('\033[%iA' %
(self.line - line)) # Move cursor up
slave_stdout.write('\033[1000C') # Move cursor to end of line
slave_stdout.write('\033[8D') # Move cursor 8 chars back
if succeeded:
slave_stdout.write(colored('succeeded', 'green'))
else:
slave_stdout.write(colored('failed', 'red'))
slave_stdout.write('\0338') # ESC 8: Restore cursor position
def log_run(self, session, run):
if not run.sandboxing:
line = self.line
self._print_username(session.username)
slave_stdout.write(colored('%-17s' % run.host.slug,
'cyan'))
slave_stdout.write(
colored('%s' % (' (sudo) ' if run.use_sudo else ''),
'red'))
slave_stdout.write(colored(run.command, 'green'))
slave_stdout.write('\n')
slave_stdout.flush()
self.line += 1
# TODO: I guess these writes should be atomic (group in
# one statement), because they can come from different
# threads.
def callback():
# TODO: Make more generic. We don't want to write to
# this logger when it has been closed. It may be
# possible that the logger has been disconnected and
# removed from the globals loggers list, but the
# callback still exists.
if not slave_stdout.closed:
self._print_status(line, run.succeeded)
return callback
else:
return lambda: None
def log_file_opened(self, session, file_entry):
if not file_entry.sandboxing:
line = self.line
self._print_username(session.username)
slave_stdout.write(
colored('%-17s' % file_entry.host.slug, 'cyan'))
slave_stdout.write(
colored(
'%s' % (' (sudo) ' if file_entry.use_sudo else ''),
'red'))
if file_entry.entry_type == Actions.Get:
slave_stdout.write('Downloading: ')
slave_stdout.write(
colored(file_entry.remote_path, 'green'))
elif file_entry.entry_type == Actions.Put:
slave_stdout.write('Uploading: ')
slave_stdout.write(
colored(file_entry.remote_path, 'green'))
elif file_entry.entry_type == Actions.Open:
slave_stdout.write('Opening file: ')
slave_stdout.write(
colored(file_entry.remote_path, 'green'))
slave_stdout.write(' mode=')
slave_stdout.write(colored(file_entry.mode, 'green'))
slave_stdout.write('\n')
slave_stdout.flush()
self.line += 1
def callback():
if not slave_stdout.closed:
self._print_status(line, file_entry.succeeded)
return callback
else:
return lambda: None
def action_started(self, session, action_entry):
line = self.line
if action_entry.sandboxing:
self._print_user_and_event(
session.username, 'Calling action (in sandbox): %s\n' %
colored(action_entry.command, 'green'))
else:
self._print_user_and_event(
session.username, 'Calling action: %s\n' %
colored(action_entry.command, 'green'))
class Callbacks(object):
def succeeded(s, result):
if not slave_stdout.closed:
self._print_status(line, True)
def failed(s, exception):
if not slave_stdout.closed:
self._print_status(line, False)
self.line += 1
return Callbacks()
def session_created(self, session):
self.line += 1
self._print_user_and_event(
session.username, 'Started session host=%s id=%s\n' %
(session.host, session.id))
def session_closed(self, session):
self.line += 1
self._print_user_and_event(
session.username, 'Closed session host=%s id=%s\n' %
(session.host, session.id))
monitor = M()
monitors.append(monitor)
with std.raw_mode(stdin):
while True:
r, w, e = select.select([master_stdin, stdin], [], [])
# Receive stream from monitor
if master_stdin in r:
stdout.write(master_stdin.read(4096))
if stdin in r:
char = stdin.read(1)
# Leave monitor when 'q' or Ctrl-C has been pressed.
if char in ('q', '\x03'):
# Cleanup
monitors.remove(monitor)
slave_stdout.close()
master_stdin.close()
return
def input(self, label, is_password=False, answers=None, default=None):
"""
Ask for plain text input. (Similar to raw_input.)
:param is_password: Show stars instead of the actual user input.
:type is_password: bool
:param answers: A list of the accepted answers or None.
:param default: Default answer.
"""
stdin = self._pty.stdin
stdout = self._pty.stdout
def print_question():
answers_str = (' [%s]' % (','.join(answers)) if answers else '')
default_str = (' (default=%s)' % default if default is not None else '')
stdout.write(colored(' %s%s%s: ' % (label, answers_str, default_str), 'cyan'))
stdout.flush()
def read_answer():
value = ''
print_question()
while True:
c = stdin.read(1)
# Enter pressed
if c in ('\r', '\n') and (value or default):
stdout.write('\r\n')
break
# Backspace pressed
elif c == '\x7f' and value:
stdout.write('\b \b')
value = value[:-1]
# Valid character
elif ord(c) in range(32, 127):
stdout.write(colored('*' if is_password else c, attrs=['bold']))
value += c
elif c == '\x03': # Ctrl-C
raise NoInput
stdout.flush()
# Return result
if not value and default is not None:
return default
else:
return value
with std.raw_mode(stdin):
while True:
if self._pty.interactive:
value = read_answer()
elif default is not None:
print_question()
stdout.write('[non interactive] %r\r\n' % default)
stdout.flush()
value = default
else:
# XXX: Asking for input in non-interactive session
value = read_answer()
# Return if valid anwer
if not answers or value in answers:
return value
# Otherwise, ask again.
else:
stdout.write('Invalid answer.\r\n')
stdout.flush()
def _posix_shell(self, chan, raw=True, initial_input=None):
"""
Create a loop which redirects sys.stdin/stdout into this channel.
The loop ends when channel.recv() returns 0.
Code inspired by the Paramiko interactive demo.
"""
result = []
password_sent = False
# Set terminal in raw mode
if raw:
context = raw_mode(self.pty.stdin)
else:
context = contextlib.nested()
assert self.pty.set_ssh_channel_size
with context:
# Make channel non blocking.
chan.settimeout(0.0)
# When initial input has been given, send this first
if initial_input:
time.sleep(
0.2
) # Wait a very short while for the channel to be initialized, before sending.
chan.send(initial_input)
reading_from_stdin = True
# Read/write loop
while True:
# Don't wait for any input when an exit status code has been
# set already. (But still wait for the output to finish.)
if chan.status_event.isSet():
reading_from_stdin = False
# When the channel is closed, and there's nothing to read
# anymore. We can return what we got from Paramiko. (Not
# sure why this happens. Most of the time, select() still
# returns and chan.recv() returns an empty string, but when
# read_ready is False, select() doesn't return anymore.)
if chan.closed and not chan.in_buffer.read_ready():
break
channels = [self.pty.stdin, chan
] if reading_from_stdin else [chan]
r, w, e = select(channels, [], [], 1)
# Note the select-timeout. That is required in order to
# check for the status_event every second.
# Receive stream
if chan in r:
try:
x = chan.recv(1024)
# Received length 0 -> end of stream
if len(x) == 0:
break
# Write received characters to stdout and flush
while True:
try:
self.pty.stdout.write(x)
break
except IOError as e:
# Sometimes, when we have a lot of output, we get here:
# IOError: [Errno 11] Resource temporarily unavailable
# Just waiting a little, and retrying seems to work.
# See also: deployer.run.socket_client for a similar issue.
time.sleep(0.2)
self.pty.stdout.flush()
# Also remember received output.
# We want to return what's written to stdout.
result.append(x)
# Do we need to send the sudo password? (It's when the
# magic prompt has been detected in the stream) Note
# that we only monitor the last part of 'result', it's
# a bit fuzzy, but works.
if not password_sent and self.magic_sudo_prompt in ''.join(
result[-32:]):
chan.send(self.password)
chan.send('\n')
password_sent = True
except socket.timeout:
pass
# Send stream (one by one character)
# (use 'elif', read stdin only when there is no more output to be received.)
elif self.pty.stdin in r:
try:
# Make stdin non-blocking. (The select call already
# blocked for us, we want sys.stdin.read() to read
# as many bytes as possible without blocking.)
try:
fdesc.setNonBlocking(self.pty.stdin)
x = self.pty.stdin.read(1024)
finally:
# Set stdin blocking again
# (Writing works better in blocking mode.
# Especially OS X seems to be very sensitive if we
# write lange amounts [>1000 bytes] nonblocking to
# stdout. That causes a lot of IOErrors.)
fdesc.setBlocking(self.pty.stdin)
# We receive \n from stdin, but \r is required to
# send. (Until now, the only place where the
# difference became clear is in redis-cli, which
# only accepts \r as confirmation.)
x = x.replace('\n', '\r')
except IOError as e:
# What to do with IOError exceptions?
# (we see what happens in the next select-call.)
continue
# Received length 0
# There's no more at stdin to read.
if len(x) == 0:
# However, we should go on processing the input
# from the remote end, until the process finishes
# there (because it was done or processed Ctrl-C or
# Ctrl-D/EOF.)
#
# The end of the input stream happens when we are
# using StringIO at the client side, and we're not
# attached to a real pseudo terminal. (For
# unit-testing, or background commands.)
reading_from_stdin = False
continue
# Write to channel
chan.send(x)
# Not sure about this. Sometimes, when pasting large data
# in the command line, the many concecutive read or write
# commands will make Paramiko hang somehow... (This was
# the case, when still using a blocking pty.stdin.read(1)
# instead of a non-blocking readmany.
time.sleep(0.01)
return ''.join(result)
