def run(layers):
"""Risk plugin for volcano population impact
Input
layers: List of layers expected to contain
H: Raster layer of volcanic hazard level
P: Raster layer of population data on the same grid as H
"""
# Identify hazard and exposure layers
# Volcanic hazard level [0-1]
volcanic_hazard_level = get_hazard_layer(layers)
population = get_exposure_layer(layers) # Density [people/area]
# Extract data as numeric arrays
V = volcanic_hazard_level.get_data(nan=0.0)
# Population density
P = population.get_data(nan=0.0, scaling=True)
# Calculate impact as population exposed to depths > threshold
I = numpy.where(V > 2.0 / 3, P, 0)
# Generate text with result for this study
number_of_people_affected = numpy.nansum(I.flat)
impact_summary = ('%i people affected by volcanic hazard level greater'
' than 0.667' % number_of_people_affected)
# Create raster object and return
R = Raster(I,
projection=volcanic_hazard_level.get_projection(),
geotransform=volcanic_hazard_level.get_geotransform(),
name='People affected',
keywords={'impact_summary': impact_summary})
return R
def run(layers):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of population data on the same grid as H
"""
threshold = 1 # Load above which people are regarded affected [kg/m2]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Tephra load [kg/m2]
population = get_exposure_layer(layers) # Density [people/km^2]
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
P = population.get_data(nan=0.0, scaling=True) # Population density
# Calculate impact as population exposed to depths > threshold
I = numpy.where(D > threshold, P, 0)
# Generate text with result for this study
number_of_people_affected = numpy.nansum(I.flat)
caption = ('%i people affected by ash levels greater '
'than %i kg/m^2' % (number_of_people_affected,
threshold))
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='People affected',
keywords={'caption': caption})
return R
def run(layers):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of poor household density on the same grid as H
"""
# Depth above which people are regarded affected [m]
threshold = 1.0
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Flood inundation [m]
poor_households = get_exposure_layer(layers) # Poverty density
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
# This is the new generic way of scaling (issue #168 and #172)
P = poor_households.get_data(nan=0.0, scaling=True)
I = numpy.where(D > threshold, P, 0)
# Generate text with result for this study
total = str(int(sum(P.flat) / 1000))
count = str(int(sum(I.flat) / 1000))
# Create report
iname = inundation.get_name()
pname = poor_households.get_name()
impact_summary = ('<b>Apabila terjadi "%s" perkiraan dampak terhadap '
'"%s" kemungkinan yang terjadi:</b><br><br><p>' %
(iname, pname))
impact_summary += ('<table border="0" width="320px">')
#' <tr><td><b>%s:</b></td>'
#'<td align="right"><b>%s</b></td></tr>'
#% ('Jumlah Rumah Tangga Miskin', total))
impact_summary += (' <tr><td><b>%s:</b></td>'
'<td align="right"><b>%s</b></td></tr>'
% ('Jumlah Rumah Tangga Terdampak (x 1000)', count))
impact_summary += '</table>'
impact_summary += '<br>' # Blank separation row
impact_summary += '<b>Catatan:</b><br>'
impact_summary += '- Jumlah Rumah Tangga Miskin %s<br>' % total
impact_summary += '- Jumlah dalam ribuan<br>'
impact_summary += ('- Rumah Tangga Miskin dalam bahaya ketika '
'banjir lebih dari %.1f m. ' % threshold)
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='People affected',
keywords={'impact_summary': impact_summary})
return R
def run(self, layers):
"""Risk plugin for tsunami population
"""
thresholds = [0.2, 0.3, 0.5, 0.8, 1.0]
#threshold = 1 # Depth above which people are regarded affected [m]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Tsunami inundation [m]
population = get_exposure_layer(layers) # Population density
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
P = population.get_data(nan=0.0, scaling=True) # Population density
# Calculate impact as population exposed to depths > 1m
I_map = numpy.where(D > thresholds[-1], P, 0)
# Generate text with result for this study
number_of_people_affected = numpy.nansum(I_map.flat)
# Do breakdown
# Create report
impact_summary = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>' % ('Ambang batas', 'Jumlah orang terdampak'))
counts = []
for i, threshold in enumerate(thresholds):
I = numpy.where(D > threshold, P, 0)
counts.append(numpy.nansum(I.flat))
impact_summary += ' <tr><td>%s m</td><td>%i</td></tr>' % (
threshold, counts[i])
impact_summary += '</table>'
# Create raster object and return
R = Raster(I_map,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='People affected by more than 1m of inundation',
keywords={'impact_summary': impact_summary})
return R
def run(layers,
teta=14.05, beta=0.17, zeta=2.15):
"""Risk plugin for earthquake fatalities
Input
H: Numerical array of hazard data
E: Numerical array of exposure data
"""
# Suppress warnings about invalid value in multiply and divide zero
# http://comments.gmane.org/gmane.comp.python.numeric.general/43218
# http://docs.scipy.org/doc/numpy/reference/generated/numpy.seterr.html
old_numpy_setting = numpy.seterr(invalid='ignore')
numpy.seterr(divide='ignore')
# Identify input layers
intensity = get_hazard_layer(layers)
population = get_exposure_layer(layers)
# Extract data
H = intensity.get_data(nan=0)
P = population.get_data(nan=0)
# Calculate impact
logHazard = 1 / beta * numpy.log(H / teta)
# Convert array to be standard floats expected by cdf
arrayout = numpy.array([[float(value) for value in row]
for row in logHazard])
x = arrayout * P
F = normal_cdf(x)
numpy.seterr(**old_numpy_setting)
# Create new layer and return
R = Raster(F,
projection=population.get_projection(),
geotransform=population.get_geotransform(),
name='Estimated fatalities')
return R
def run(layers):
"""Risk plugin for earthquake school damage
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
H = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry()
shaking = H.get_data()
# Calculate building damage
building_damage = []
for i in range(len(shaking)):
x = float(shaking[i].values()[0])
if x < 6.0:
value = 0.0
else:
value = (0.692 * (x ** 4) -
15.82 * (x ** 3) +
135.0 * (x ** 2) -
509.0 * x +
714.4)
building_damage.append({'DAMAGE': value, 'MMI': x})
# FIXME (Ole): Need helper to generate new layer using
# correct spatial reference
# (i.e. sensibly wrap the following lines)
projection = E.get_projection()
V = Vector(data=building_damage,
projection=E.get_projection(),
geometry=coordinates)
return V
def run(self, layers):
"""Risk plugin for tsunami population
"""
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
Hi = H.interpolate(E, attribute_name='depth')
# Extract relevant numerical data
coordinates = Hi.get_geometry()
depth = Hi.get_data()
N = len(depth)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building impact according to guidelines
count3 = 0
count1 = 0
count0 = 0
population_impact = []
for i in range(N):
if H.is_raster:
# Get depth
dep = float(depth[i]['depth'])
# Classify buildings according to depth
if dep >= 3:
affected = 3 # FIXME: Colour upper bound is 100 but
count3 += 1 # does not catch affected == 100
elif 1 <= dep < 3:
affected = 2
count1 += 1
else:
affected = 1
count0 += 1
elif H.is_vector:
dep = 0 # Just put something here
cat = depth[i]['Affected']
if cat is True:
affected = 3
count3 += 1
else:
affected = 1
count0 += 1
# Collect depth and calculated damage
result_dict = {self.target_field: affected,
'DEPTH': dep}
# Carry all original attributes forward
# FIXME: This should be done in interpolation. Check.
#for key in attributes:
# result_dict[key] = E.get_data(key, i)
# Record result for this feature
population_impact.append(result_dict)
# Create report
Hname = H.get_name()
Ename = E.get_name()
if H.is_raster:
impact_summary = ('<b>In case of "%s" the estimated impact to '
'"%s" '
'is:</b><br><br><p>' % (Hname, Ename))
impact_summary += ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></tr>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % (_('Impact'), _('Number of buildings'),
_('Low'), count0,
_('Medium'), count1,
_('High'), count3))
else:
impact_summary = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></tr>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('Terdampak oleh tsunami',
'Jumlah gedung',
'Terdampak', count3,
'Tidak terdampak', count0,
'Semua', N))
impact_summary += '<br>' # Blank separation row
impact_summary += '<b>' + _('Assumption') + ':</b><br>'
impact_summary += ('Levels of impact are defined by BNPB\'s '
'<i>Pengkajian Risiko Bencana</i>')
impact_summary += ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></tr>'
' <tr></tr>'
' <tr><td>%s:</td><td>%s:</td></tr>'
' <tr><td>%s:</td><td>%s:</td></tr>'
' <tr><td>%s:</td><td>%s:</td></tr>'
'</table>' % (_('Impact'), _('Tsunami height'),
_('Low'), '<1 m',
_('Medium'), '1-3 m',
_('High'), '>3 m'))
# Create style
style_classes = [dict(label='< 1 m', min=0, max=1,
colour='#1EFC7C', transparency=0, size=1),
dict(label='1 - 3 m', min=1, max=2,
colour='#FFA500', transparency=0, size=1),
dict(label='> 3 m', min=2, max=4,
colour='#F31A1C', transparency=0, size=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
if Hi.is_line_data:
name = 'Roads flooded'
elif Hi.is_point_data:
name = 'Buildings flooded'
V = Vector(data=population_impact,
projection=E.get_projection(),
geometry=coordinates,
keywords={'impact_summary': impact_summary},
geometry_type=Hi.geometry_type,
name=name,
style_info=style_info)
return V
def run(self, layers):
"""Impact plugin for hazard impact
"""
# Extract data
H = get_hazard_layer(layers) # Value
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
H = H.interpolate(E, attribute_name='hazard_level')
# Extract relevant numerical data
coordinates = H.get_geometry()
category = H.get_data()
N = len(category)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building impact according to guidelines
count2 = 0
count1 = 0
count0 = 0
building_impact = []
for i in range(N):
# Get category value
val = float(category[i]['hazard_level'])
# Classify buildings according to value
if val >= 2.0 / 3:
affected = 2
count2 += 1
elif 1.0 / 3 <= val < 2.0 / 3:
affected = 1
count1 += 1
else:
affected = 0
count0 += 1
# Collect depth and calculated damage
result_dict = {self.target_field: affected,
'CATEGORY': val}
# Record result for this feature
building_impact.append(result_dict)
# Create report
#FIXME: makes the output format the same as all other results
impact_summary = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % (_('Category'), _('Affected'),
_('Low'), count0,
_('Medium'), count1,
_('High'), count2))
# Create style
style_classes = [dict(label=_('Low'), min=0, max=0,
colour='#1EFC7C', transparency=0, size=1),
dict(label=_('Medium'), min=1, max=1,
colour='#FFA500', transparency=0, size=1),
dict(label=_('High'), min=2, max=2,
colour='#F31A1C', transparency=0, size=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
name = 'Buildings Affected'
V = Vector(data=building_impact,
projection=E.get_projection(),
geometry=coordinates,
keywords={'impact_summary': impact_summary},
geometry_type=H.geometry_type,
name=name,
style_info=style_info)
return V
def run(self, layers):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of population data on the same grid as H
"""
# Depth above which people are regarded affected [m]
threshold = 1.0 # Threshold [m]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Flood inundation [m]
population = get_exposure_layer(layers)
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
# Calculate impact as population exposed to depths > threshold
if population.get_resolution(native=True, isotropic=True) < 0.0005:
# Keep this for backwards compatibility just a little while
# This uses the original custom population set and
# serves as a reference
P = population.get_data(nan=0.0) # Population density
pixel_area = 2500
I = numpy.where(D > threshold, P, 0) / 100000.0 * pixel_area
else:
# This is the new generic way of scaling (issue #168 and #172)
P = population.get_data(nan=0.0, scaling=True)
I = numpy.where(D > threshold, P, 0)
# Generate text with result for this study
total = str(int(numpy.sum(P) / 1000))
number_of_people_affected = int(numpy.sum(I) / 1000)
count = str(number_of_people_affected)
# Create report
iname = inundation.get_name()
pname = population.get_name()
impact_summary = ('<b>Apabila terjadi "%s" perkiraan dampak'
'terhadap "%s" kemungkinan yang terjadi:'
'</b><br><br><p>' % (iname, pname))
impact_summary += ('<table border="0" width="320px">')
impact_summary += (' <tr><td><b>%s:</b></td>'
'<td align="right"><b>%s</b></td></tr>'
% ('Perlu Evakuasi (x 1000)', count))
impact_summary += '</table>'
impact_summary += '<br>' # Blank separation row
impact_summary += '<b>Catatan:</b><br>'
impact_summary += '- Jumlah penduduk Jakarta %s<br>' % total
impact_summary += '- Jumlah dalam ribuan<br>'
impact_summary += ('- Penduduk dianggap perlu dievakuasi ketika '
'banjir lebih dari %.1f m.' % threshold)
# Create impact_table based on BNPB Perka 7/2008 minimum bantuan
# Weekly needs (see issue #82)
rice = number_of_people_affected * 2.8
drinking_water = number_of_people_affected * 17.5
water = number_of_people_affected * 67
family_kits = number_of_people_affected / 5
toilets = number_of_people_affected / 20
impact_table = ('<table class="table table-striped condensed'
' bordered-table">'
' <caption>Minmum Bantuan per minggu</caption>'
' <thead>'
' <tr>'
' <th>Bantuan</th>'
' <th>Jumlah</th>'
' </tr>'
' </thead>'
' <tbody>'
' <tr>'
' <td>Beras [kg]</td>'
' <td>%i</td>'
' </tr>'
' <tr>'
' <td>Air Minum [l]</td>'
' <td>%i</td>'
' </tr>'
' <tr>'
' <td>Air Bersih [l]</td>'
' <td>%i</td>'
' </tr>'
' <tr>'
' <td>Kit Keluarga</td>'
' <td>%i</td>'
' </tr>'
' <tr>'
' <td>Jamban Keluarga</td>'
' <td>%i</td>'
' </tr>'
' </tbody>'
' <caption>Sumber: BNPB Perka 7/2008</caption>'
'</table>' % (rice, drinking_water, water, family_kits,
toilets))
map_title = 'Penduduk yang Mungkin dievakuasi'
style_info['legend_title'] = 'Kepadatan Penduduk'
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='Penduduk yang %s' % (self.plugin_name.lower()),
keywords={'impact_summary': impact_summary,
'impact_table': impact_table,
'map_title': map_title},
style_info=style_info)
return R
def run(self, layers):
"""Risk plugin for earthquake school damage
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
keywords = E.get_keywords()
if 'datatype' in keywords:
datatype = keywords['datatype']
if datatype.lower() == 'osm':
# Map from OSM attributes to the guideline classes (URM and RM)
E = osm2bnpb(E, target_attribute=self.vclass_tag)
elif datatype.lower() == 'sigab':
# Map from SIGAB attributes to the guideline classes
# (URM and RM)
E = sigab2bnpb(E)
else:
E = unspecific2bnpb(E, target_attribute=self.vclass_tag)
else:
E = unspecific2bnpb(E, target_attribute=self.vclass_tag)
# Interpolate hazard level to building locations
H = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry()
shaking = H.get_data()
N = len(shaking)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building damage
count3 = 0
count2 = 0
count1 = 0
count_unknown = 0
building_damage = []
for i in range(N):
mmi = float(shaking[i].values()[0])
building_class = E.get_data(self.vclass_tag, i)
lo, hi = damage_parameters[building_class]
if numpy.isnan(mmi):
# If we don't know the shake level assign Not-a-Number
damage = numpy.nan
count_unknown += 1
elif mmi < lo:
damage = 1 # Low
count1 += 1
elif lo <= mmi < hi:
damage = 2 # Medium
count2 += 1
elif mmi >= hi:
damage = 3 # High
count3 += 1
else:
msg = 'Undefined shakelevel %s' % str(mmi)
raise Exception(msg)
# Collect shake level and calculated damage
result_dict = {self.target_field: damage,
'MMI': mmi}
# Carry all orginal attributes forward
for key in attributes:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
building_damage.append(result_dict)
# Create report
caption = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s (10-25%%):</td><td>%i</td></tr>'
' <tr><td>%s (25-50%%):</td><td>%i</td></tr>'
' <tr><td>%s (50-100%%):</td><td>%i</td></tr>'
% (_('Buildings'), _('Total'),
_('All'), N,
_('Low damage'), count1,
_('Medium damage'), count2,
_('High damage'), count3))
caption += (' <tr><td>%s (NaN):</td><td>%i</td></tr>'
% ('Unknown', count_unknown))
caption += '</table>'
# Create style
style_classes = [dict(label=_('Low damage'), min=0.5, max=1.5,
colour='#fecc5c', transparency=1),
dict(label=_('Medium damage'), min=1.5, max=2.5,
colour='#fd8d3c', transparency=1),
dict(label=_('High damage'), min=2.5, max=3.5,
colour='#f31a1c', transparency=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=building_damage,
projection=E.get_projection(),
geometry=coordinates,
name='Estimated damage level',
keywords={'caption': caption},
style_info=style_info)
return V
def run(self, layers):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of population data on the same grid as H
"""
# Depth above which people are regarded affected [m]
threshold = 0.1 # Threshold [m]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Flood inundation [m]
population = get_exposure_layer(layers)
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
# Calculate impact as population exposed to depths > threshold
if population.get_resolution(native=True, isotropic=True) < 0.0005:
# Keep this for backwards compatibility just a little while
# This uses the original custom population set and
# serves as a reference
P = population.get_data(nan=0.0) # Population density
pixel_area = 2500
I = numpy.where(D > threshold, P, 0) / 100000.0 * pixel_area
else:
# This is the new generic way of scaling (issue #168 and #172)
P = population.get_data(nan=0.0, scaling=True)
I = numpy.where(D > threshold, P, 0)
# Generate text with result for this study
total = str(int(numpy.sum(P) / 1000))
count = str(int(numpy.sum(I) / 1000))
# Create report
iname = inundation.get_name()
pname = population.get_name()
impact_summary = ('<table class="table table-striped condensed">')
impact_summary += ('<caption>Apabila terjadi "%s" '
'perkiraan dampak terhadap "%s" '
'kemungkinan yang terjadi:</caption>' % (iname,
pname))
impact_summary += ('<tbody>')
impact_summary += (' <tr><th>%s:</th>'
'<td align="right">%s</td></tr>'
% ('Terdampak (x 1000)', count))
impact_summary += ('</tbody>')
impact_summary += '</table>'
impact_summary += '<br>' # Blank separation row
impact_summary += '<span class="label label-success">'
impact_summary += 'Catatan:</span>'
impact_summary += '<ul>'
impact_summary += ' <li>Jumlah penduduk Jakarta %s</li>' % total
impact_summary += ' <li>Jumlah dalam ribuan</li>'
impact_summary += (' <li>Penduduk dianggap terdampak ketika '
'banjir lebih dari %.1f m.</li>' % threshold)
impact_summary += '</ul>'
impact_table = ('<table class="table table-striped condensed'
' bordered-table">'
' <caption>Jumlah Penduduk Yang Mungkin Dievakuasi</caption>'
' <thead>'
' <tr>'
' <th rowspan="2">Wilayah</th>'
' <th colspan="2">Jumlah Penduduk</th>'
' <th rowspan="2" colspan="2" width="100px">'
'Jumlah Penduduk yang Mungkin dievakuasi</th>'
' </tr>'
' <tr>'
' <th>Perempuan</th>'
' <th>Laki-Laki</th>'
' </tr>'
' </thead>'
' <tbody>'
' <tr>'
' <td>Jakarta Barat</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' <tr>'
' <td>Jakarta Pusat</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' <tr>'
' <td>Jakarta Seletan</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' <tr>'
' <td>Jakarta Timur</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' <tr>'
' <td>Jakarta Utara</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' <tr>'
' <td class="align-right">Total</td>'
' <td>87510</td>'
' <td>93076</td>'
' <td>180586</td>'
' </tr>'
' </tbody>'
' <caption>Sumber: Badan Pusat Statistik</caption>'
'</table>')
map_title = 'Penduduk yang Mungkin dievakuasi'
style_info['legend_title'] = 'Kepadatan Penduduk'
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='Penduduk yang %s' % (self.plugin_name.lower()),
keywords={'impact_summary': impact_summary,
'impact_table': impact_table,
'map_title': map_title},
style_info=style_info)
return R
def run(self, layers,
a=0.97429, b=11.037):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of MMI ground shaking
E: Polygon population data
a: Parameter for Allen impact function
b: Parameter for Allen impact function
"""
# Identify input layers
H = get_hazard_layer(layers) # Intensity
E = get_exposure_layer(layers) # Exposure - population counts
# Interpolate hazard level to building locations
H = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry() # Stay with polygons
shaking = H.get_data()
N = len(shaking)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate fatilities
count = 0
total = 0
result_feature_set = []
for i in range(N):
mmi = float(shaking[i].values()[0])
if mmi < 0.0:
# FIXME: Hack until interpolation is fixed
mmi = 0.0
population_count = E.get_data('Jumlah_Pen', i)
# Calculate impact
F = 10 ** (a * mmi - b) * population_count
# Collect shake level and calculated damage
result_dict = {self.target_field: F,
'MMI': mmi}
# Carry all orginal attributes forward
for key in attributes:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
result_feature_set.append(result_dict)
# Calculate statistics
if not numpy.isnan(F):
count += F
total += population_count
# Create report
impact_summary = ('<table border="0" width="320px">'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('Jumlah Penduduk', int(total),
'Perkiraan Orang Meninggal', int(count)))
# Create vector layer and return
V = Vector(data=result_feature_set,
projection=E.get_projection(),
geometry=coordinates,
name='Estimated fatalities',
keywords={'impact_summary': impact_summary})
return V
def run(self, layers):
"""Risk plugin for tsunami population
"""
threshold = 1.0 # Flood threshold [m]
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
# FIXME (Ole): interpolate does not carry original name through,
# so get_name gives "Vector Layer" :-)
# Interpolate hazard level to building locations
I = H.interpolate(E)
# Extract relevant numerical data
attributes = I.get_data()
N = len(I)
# List attributes to carry forward to result layer
attribute_names = E.get_attribute_names()
# Calculate population impact
count = 0
building_impact = []
for i in range(N):
if H.is_raster:
# Get the interpolated depth
x = float(attributes[i].values()[0])
x = x > threshold
elif H.is_vector:
# Use interpolated polygon attribute
x = attributes[i]['Affected']
# Tag and count
if x is True:
affected = 1
count += 1
else:
affected = 0
# Collect depth and calculated damage
result_dict = {self.target_field: x}
# Carry all original attributes forward
# FIXME (Ole): Make this part of the interpolation (see issue #101)
for key in attribute_names:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
building_impact.append(result_dict)
# Create report
Hname = H.get_name()
Ename = E.get_name()
caption = _('<b>In case of "%s" the estimated impact to "%s" '
'the possibility of :</b><br><br><p>' % (Hname,
Ename))
caption += ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
'</table>' % (_('Building'), _('Number of'),
_('All'), N,
_('Closed'), count,
_('Opened'), N - count))
caption += '<br>' # Blank separation row
caption += '<b>' + _('Assumption') + ':</b><br>'
caption += _('Buildings that will need to closed when flooding'
'more than %.1f m' % threshold)
# Create style
style_classes = [dict(label=_('Opened'), min=0, max=0,
colour='#1EFC7C', transparency=0),
dict(label=_('Closed'), min=1, max=1,
colour='#F31A1C', transparency=0)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=building_impact,
projection=E.get_projection(),
geometry=E.get_geometry(),
name=_('Estimated buildings affected'),
keywords={'caption': caption},
style_info=style_info)
return V
def run(self, layers):
"""Risk plugin for Padang building survey
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
datatype = E.get_keywords()['datatype']
vclass_tag = 'VCLASS'
if datatype.lower() == 'osm':
# Map from OSM attributes to the padang building classes
Emap = osm2padang(E)
elif datatype.lower() == 'sigab':
Emap = sigab2padang(E)
elif datatype.lower() == 'padang':
Emap = padang2itb(E)
else:
Emap = E
# Interpolate hazard level to building locations
Hi = H.interpolate(Emap, attribute_name='MMI')
# Extract relevant numerical data
coordinates = Emap.get_geometry()
shaking = Hi.get_data()
N = len(shaking)
# List attributes to carry forward to result layer
attributes = Emap.get_attribute_names()
# Calculate building damage
count50 = 0
count25 = 0
count10 = 0
count0 = 0
building_damage = []
for i in range(N):
mmi = float(shaking[i]['MMI'])
building_class = Emap.get_data(vclass_tag, i)
building_type = str(int(building_class))
damage_params = damage_curves[building_type]
beta = damage_params['beta']
median = damage_params['median']
percent_damage = lognormal_cdf(mmi,
median=median,
sigma=beta) * 100
# Collect shake level and calculated damage
result_dict = {self.target_field: percent_damage,
'MMI': mmi}
# Carry all orginal attributes forward
for key in attributes:
result_dict[key] = Emap.get_data(key, i)
# Record result for this feature
building_damage.append(result_dict)
# Debugging
#if percent_damage > 0.01:
# print mmi, percent_damage
# Calculate statistics
if percent_damage < 10:
count0 += 1
if 10 <= percent_damage < 33:
count10 += 1
if 33 <= percent_damage < 66:
count25 += 1
if 66 <= percent_damage:
count50 += 1
# Create report
Hname = H.get_name()
Ename = E.get_name()
impact_summary = ('<b>In case of "%s" the estimated impact to '
'"%s" '
'is:</b><br><br><p>' % (Hname, Ename))
impact_summary += ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s (<10%%):</td><td>%i</td></tr>'
' <tr><td>%s (10-33%%):</td><td>%i</td></tr>'
' <tr><td>%s (33-66%%):</td><td>%i</td></tr>'
' <tr><td>%s (66-100%%):</td><td>%i</td></tr>'
'</table></font>' % (_('Buildings'), _('Total'),
_('All'), N,
_('No damage'), count0,
_('Low damage'), count10,
_('Medium damage'), count25,
_('High damage'), count50))
impact_summary += '<br>' # Blank separation row
impact_summary += '<b>' + _('Assumption') + ':</b><br>'
# This is the proper text:
#_('Levels of impact are defined by post 2009 '
# 'Padang earthquake survey conducted by Geoscience '
# 'Australia and Institute of Teknologi Bandung.'))
#_('Unreinforced masonry is assumed where no '
# 'structural information is available.'))
impact_summary += _('Levels of impact are defined by post 2009 '
'Padang earthquake survey conducted by Geoscience '
'Australia and Institute of Teknologi Bandung.')
impact_summary += _('Unreinforced masonry is assumed where no '
'structural information is available.')
# Create style
style_classes = [dict(label=_('No damage'), min=0, max=10,
colour='#00ff00', transparency=1),
dict(label=_('Low damage'), min=10, max=33,
colour='#ffff00', transparency=1),
dict(label=_('Medium damage'), min=33, max=66,
colour='#ffaa00', transparency=1),
dict(label=_('High damage'), min=66, max=100,
colour='#ff0000', transparency=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=building_damage,
projection=E.get_projection(),
geometry=coordinates,
name='Estimated pct damage',
keywords={'impact_summary': impact_summary},
style_info=style_info)
return V
def run(self, layers,
x=0.62275231, y=8.03314466, zeta=2.15):
"""Indonesian Earthquake Fatality Model
Input
layers: List of layers expected to contain
H: Raster layer of MMI ground shaking
P: Raster layer of population density
"""
# Define percentages of people being displaced at each mmi level
displacement_rate = {1: 0, 2: 0, 3: 0, 4: 0, 5: 0, 6: 0,
7: 0.1, 8: 0.5, 9: 0.75, 10: 1.0}
# Extract input layers
intensity = get_hazard_layer(layers)
population = get_exposure_layer(layers)
question = get_question(intensity.get_name(),
population.get_name(),
self)
# Extract data grids
H = intensity.get_data() # Ground Shaking
P = population.get_data() # Population Density
# Calculate population affected by each MMI level
# FIXME (Ole): this range is 2-9. Should 10 be included?
mmi_range = range(2, 10)
number_of_exposed = {}
number_of_displaced = {}
number_of_fatalities = {}
# Calculate fatality rates for observed Intensity values (H
# based on ITB power model
R = numpy.zeros(H.shape)
for mmi in mmi_range:
# Identify cells where MMI is in class i
mask = (H > mmi - 0.5) * (H <= mmi + 0.5)
# Count population affected by this shake level
I = numpy.where(mask, P, 0)
# Calculate expected number of fatalities per level
fatality_rate = numpy.power(10.0, x * mmi - y)
F = fatality_rate * I
# Calculate expected number of displaced people per level
try:
D = displacement_rate[mmi] * I
except Exception, e:
msg = 'mmi = %i, I = %s, Error msg: %s' % (mmi, str(I), str(e))
fid = open('C:\\error_message.txt', 'wb')
fid.write(msg)
fid.close()
# Sum up numbers for map
R += F # Fatalities
#R += D # Displaced
# Generate text with result for this study
# This is what is used in the real time system exposure table
number_of_exposed[mmi] = numpy.nansum(I.flat)
number_of_displaced[mmi] = numpy.nansum(D.flat)
number_of_fatalities[mmi] = numpy.nansum(F.flat)
def run(self, layers, x=0.62275231, y=8.03314466, zeta=2.15):
"""Gender specific earthquake impact model
Input
layers: List of layers expected to contain
H: Raster layer of MMI ground shaking
P: Raster layer of population density
"""
# Define percentages of people being displaced at each mmi level
displacement_rate = {1: 0, 2: 0, 3: 0, 4: 0, 5: 0, 6: 0, 7: 0.1, 8: 0.5, 9: 0.75, 10: 1.0}
# Extract input layers
intensity = get_hazard_layer(layers)
population = get_exposure_layer(layers)
question = get_question(intensity.get_name(), population.get_name(), self)
# Extract data grids
H = intensity.get_data() # Ground Shaking
P = population.get_data() # Population Density
# Calculate population affected by each MMI level
# FIXME (Ole): this range is 2-9. Should 10 be included?
mmi_range = range(2, 10)
number_of_exposed = {}
number_of_fatalities = {}
# Calculate fatality rates for observed Intensity values (H
# based on ITB power model
R = numpy.zeros(H.shape)
for mmi in mmi_range:
# Identify cells where MMI is in class i
mask = (H > mmi - 0.5) * (H <= mmi + 0.5)
# Count population affected by this shake level
I = numpy.where(mask, P, 0)
# Calculate expected number of fatalities per level
fatality_rate = numpy.power(10.0, x * mmi - y)
F = fatality_rate * I
# Sum up fatalities to create map
R += F
# Generate text with result for this study
# This is what is used in the real time system exposure table
number_of_exposed[mmi] = numpy.nansum(I.flat)
number_of_fatalities[mmi] = numpy.nansum(F.flat)
# Set resulting layer to zero when less than a threshold. This is to
# achieve transparency (see issue #126).
R[R < 1] = numpy.nan
# Total statistics
total = numpy.nansum(P.flat)
# Compute number of fatalities
fatalities = numpy.nansum(number_of_fatalities.values())
# Compute number of people displaced due to building collapse
displaced = 0
for mmi in mmi_range:
displaced += displacement_rate[mmi] * number_of_exposed[mmi]
displaced_women = displaced * 0.52 # Could be made province dependent
displaced_pregnant_women = displaced_women * 0.01387 # CHECK
# Generate impact report
table_body = [question]
# Add total fatality estimate
s = str(int(fatalities)).rjust(10)
table_body.append(TableRow([_("Number of fatalities"), s], header=True))
# Add total estimate of people displaced
s = str(int(displaced)).rjust(10)
table_body.append(TableRow([_("Number of people displaced"), s], header=True))
s = str(int(displaced_women)).rjust(10)
table_body.append(TableRow([_("Number of women displaced"), s], header=True))
s = str(int(displaced_pregnant_women)).rjust(10)
table_body.append(TableRow([_("Number of pregnant women displaced"), s], header=True))
table_body.append(TableRow(_("Action Checklist:"), header=True))
table_body.append(_("Are enough shelters available for %i women?") % displaced_women)
table_body.append(
_("Are enough facilities available to assist %i " "pregnant women?") % displaced_pregnant_women
)
table_body.append(TableRow(_("Notes:"), header=True))
table_body.append(_("Fatality model is from " "Institute of Teknologi Bandung 2012."))
impact_summary = Table(table_body).toNewlineFreeString()
impact_table = impact_summary
map_title = _("Earthquake impact to population")
# Create new layer and return
L = Raster(
R,
projection=population.get_projection(),
geotransform=population.get_geotransform(),
keywords={
"impact_summary": impact_summary,
"total_population": total,
"total_fatalities": fatalities,
"impact_table": impact_table,
"map_title": map_title,
},
name=_("Estimated fatalities"),
style_info=style_info,
)
# Maybe return a shape file with contours instead
return L
def run(self, layers):
"""Risk plugin for Padang building survey
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
question = get_question(H.get_name(),
E.get_name(),
self)
# Map from different kinds of datasets to Padang vulnerability classes
datatype = E.get_keywords()['datatype']
vclass_tag = 'VCLASS'
if datatype.lower() == 'osm':
# Map from OSM attributes
Emap = osm2padang(E)
elif datatype.lower() == 'sigab':
# Map from SIGAB attributes
Emap = sigab2padang(E)
else:
Emap = E
# Interpolate hazard level to building locations
I = H.interpolate(Emap, attribute_name='MMI')
# Extract relevant numerical data
attributes = I.get_data()
N = len(I)
# Calculate building damage
count_high = count_medium = count_low = count_none = 0
for i in range(N):
mmi = float(attributes[i]['MMI'])
building_type = Emap.get_data(vclass_tag, i)
damage_params = damage_curves[building_type]
beta = damage_params['beta']
median = damage_params['median']
percent_damage = lognormal_cdf(mmi,
median=median,
sigma=beta) * 100
# Add calculated impact to existing attributes
attributes[i][self.target_field] = percent_damage
# Calculate statistics
if percent_damage < 10:
count_none += 1
if 10 <= percent_damage < 33:
count_low += 1
if 33 <= percent_damage < 66:
count_medium += 1
if 66 <= percent_damage:
count_high += 1
# Generate impact report
table_body = [question,
TableRow([_('Buildings'), _('Total')],
header=True),
TableRow([_('All'), N]),
TableRow([_('No damage'), count_none]),
TableRow([_('Low damage'), count_low]),
TableRow([_('Medium damage'), count_medium]),
TableRow([_('High damage'), count_high])]
table_body.append(TableRow(_('Notes:'), header=True))
table_body.append(_('Levels of impact are defined by post 2009 '
'Padang earthquake survey conducted by Geoscience '
'Australia and Institute of Teknologi Bandung.'))
table_body.append(_('Unreinforced masonry is assumed where no '
'structural information is available.'))
impact_summary = Table(table_body).toNewlineFreeString()
impact_table = impact_summary
map_title = _('Earthquake damage to buildings')
# Create style
style_classes = [dict(label=_('No damage'), min=0, max=10,
colour='#00ff00', transparency=1),
dict(label=_('Low damage'), min=10, max=33,
colour='#ffff00', transparency=1),
dict(label=_('Medium damage'), min=33, max=66,
colour='#ffaa00', transparency=1),
dict(label=_('High damage'), min=66, max=100,
colour='#ff0000', transparency=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=attributes,
projection=E.get_projection(),
geometry=E.get_geometry(),
name='Estimated pct damage',
keywords={'impact_summary': impact_summary,
'impact_table': impact_table,
'map_title': map_title},
style_info=style_info)
return V
def run(self, layers):
"""Risk plugin for tsunami population
"""
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
Hi = H.interpolate(E)
# Extract relevant numerical data
coordinates = Hi.get_geometry()
depth = Hi.get_data()
N = len(depth)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building impact according to guidelines
count3 = 0
count1 = 0
count0 = 0
population_impact = []
for i in range(N):
if H.is_raster:
# Get depth
dep = float(depth[i].values()[0])
# Classify buildings according to depth
if dep >= 3:
affected = 3 # FIXME: Colour upper bound is 100 but
count3 += 1 # does not catch affected == 100
elif 1 <= dep < 3:
affected = 2
count1 += 1
else:
affected = 1
count0 += 1
elif H.is_vector:
dep = 0 # Just put something here
cat = depth[i]['Affected']
if cat is True:
affected = 3
count3 += 1
else:
affected = 1
count0 += 1
# Collect depth and calculated damage
result_dict = {self.target_field: affected,
'DEPTH': dep}
# Carry all original attributes forward
# FIXME: This should be done in interpolation. Check.
#for key in attributes:
# result_dict[key] = E.get_data(key, i)
# Record result for this feature
population_impact.append(result_dict)
# Create report
if H.is_raster:
impact_summary = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('ketinggian tsunami', 'Jumlah gedung',
'< 1 m', count0,
'1 - 3 m', count1,
'> 3 m', count3))
else:
impact_summary = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('Terdampak oleh tsunami', 'Jumlah gedung',
'Terdampak', count3,
'Tidak terdampak', count0,
'Semua', N))
# Create style
style_classes = [dict(label=_('OK'), min=0, max=2,
colour='#1EFC7C', transparency=0),
dict(label=_('Flooded'), min=2, max=4,
colour='#F31A1C', transparency=0)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
if Hi.is_line_data:
name = 'Roads flooded'
elif Hi.is_point_data:
name = 'Buildings flooded'
V = Vector(data=population_impact,
projection=E.get_projection(),
geometry=coordinates,
keywords={'impact_summary': impact_summary},
geometry_type=Hi.geometry_type,
name=name,
style_info=style_info)
return V
def run(layers):
"""Calculate population exposed to different levels of ground shaking
Input
layers: List of layers expected to contain
H: Raster layer of MMI ground shaking
P: Raster layer of population density
"""
# Identify input layers
intensity = get_hazard_layer(layers)
population = get_exposure_layer(layers)
# Extract data
H = intensity.get_data(nan=0)
P = population.get_data(nan=0)
# Calculate exposure to MMI impact
mmi_classes = range(1, 11) # MMI classes considered (1-10)
# Form result as keyword strings
mmi_str = str(mmi_classes)[1:-1] # Get rid of []
count_str = ''
for i in mmi_classes:
# Identify cells where MMI is in class i
mask = (H >= i - 0.5) * (H < i + 0.5)
# Count population affected by this shake level
count = round(numpy.nansum(P[mask]))
if numpy.isnan(count):
count = 0
# Update keyword string
count_str += '%i ' % count
# Calculate fatality map (FIXME (Ole): Need to replaced by USGS model)
a = 0.97429
b = 11.037
F = 10 ** (a * H - b) * P
# Generate text with result for this study
count = numpy.nansum(F.flat)
total = numpy.nansum(P.flat)
# Create report
caption = ('<table border="0" width="320px">'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('Jumlah Penduduk', int(total),
'Perkiraan Orang Meninggal', int(count)))
# Create new layer and return
R = Raster(F,
projection=population.get_projection(),
geotransform=population.get_geotransform(),
name='Estimated fatalities',
keywords={'caption': caption,
'mmi-classes': mmi_str,
'affected-population': count_str})
return R
def run(layers):
"""Risk plugin for tephra impact
"""
# Extract data
H = get_hazard_layer(layers) # Ash load
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
H = H.interpolate(E, attribute_name="load")
# Calculate building damage
count3 = 0
count2 = 0
count1 = 0
count0 = 0
result = []
for i in range(len(E)):
# -------------------
# Extract parameters
# -------------------
load = H.get_data("load", i)
# ------------------------
# Compute damage level
# ------------------------
# FIXME: The thresholds have been greatly reduced
# for the purpose of demonstration. Any real analyis
# should bring them back to 0, 90, 150, 300
if 0.01 <= load < 0.5:
# Loss of crops and livestock
impact = 0
count0 += 1
elif 0.5 <= load < 2.0:
# Cosmetic damage
impact = 1
count1 += 1
elif 2.0 <= load < 10.0:
# Partial building collapse
impact = 2
count2 += 1
elif load >= 10.0:
# Complete building collapse
impact = 3
count3 += 1
else:
impact = 0
count0 += 1
result.append({"DAMAGE": impact, "ASHLOAD": load})
# Create report
impact_summary = (
'<font size="3"> <table border="0" width="320px">'
" <tr><th><b>%s</b></th><th><b>%s</b></th></th>"
" <tr></tr>"
" <tr><td>%s:</td><td>%i</td></tr>"
" <tr><td>%s:</td><td>%i</td></tr>"
" <tr><td>%s:</td><td>%i</td></tr>"
" <tr><td>%s:</td><td>%i</td></tr>"
"</table></font>"
% (
"Beban abu",
"Gedung dampak",
"< 0.5 kg/m2",
count0,
"0.5 - 2 kg/m2",
count1,
"2 - 10 kg/m2",
count2,
"> 10 kg/m2",
count3,
)
)
#'</table>' %
# ('Beban abu', 'Gedung dampak',
# 'Gangguan (< 90 kg/m2)', count0,
# 'Kerusakan kosmetik (90 - 150 kg/m2', count1,
# 'parsial runtuhnya (150 - 300 kg/m2', count2,
# 'runtuhnya lengkap (> 300 kg/m2', count3))
V = Vector(
data=result,
projection=E.get_projection(),
geometry=E.get_geometry(),
name="Estimated ashload damage",
keywords={"impact_summary": impact_summary},
)
return V
def run(layers,
teta=14.05, beta=0.17, zeta=2.15):
"""Risk plugin for earthquake fatalities
Input
H: Numerical array of hazard data
E: Numerical array of exposure data
Algorithm and coefficients are from:
An Empirical Model for Global Earthquake Fatality Estimation.
Kishor Jaiswal and David Wald.
Earthquake Spectra, Volume 26, No. 4, pages 1017-1037, November 2010.
teta=14.05, beta=0.17, zeta=2.1 # Coefficients for Indonesia.
"""
# Identify input layers
intensity = get_hazard_layer(layers)
population = get_exposure_layer(layers)
print intensity.get_resolution()
print population.get_resolution()
# Extract data
H = intensity.get_data(nan=0) # Ground Shaking
P = population.get_data(nan=0) # Population Density
import cPickle
name = intensity.get_name()
print name
fid = open('/home/nielso/population_%s.pck' % name, 'wb')
cPickle.dump(P, fid)
fid.close()
fid = open('/home/nielso/intensity_%s.pck' % name, 'wb')
cPickle.dump(H, fid)
fid.close()
# Calculate population affected by each MMI level
mmi_range = range(2, 10)
number_of_people_affected = {}
for mmi in mmi_range:
mask = numpy.logical_and(mmi - 0.5 < H,
H <= mmi + 0.5)
I = numpy.where(mask, P, 0)
# Generate text with result for this study
number_of_people_affected[mmi] = numpy.nansum(I.flat)
# Calculate impact according to equation (1) in the
# Kishor and Wald 2010
logHazard = 1 / beta * numpy.log(H / teta)
# Convert array to be standard floats expected by cdf
arrayout = numpy.array([[float(value) for value in row]
for row in logHazard])
F = cdf(arrayout * P)
# Stats
total = numpy.nansum(P.flat)
fatalities = numpy.nansum(F)
print 'Total', total
print 'Estimated fatalities', fatalities
print 'Min', numpy.amin(F)
print 'Max', numpy.amax(F)
# Generate text with result for this study
caption = generate_exposure_table(mmi_range,
number_of_people_affected)
caption += generate_fatality_table(fatalities)
# Create new layer and return
R = Raster(F,
projection=population.get_projection(),
geotransform=population.get_geotransform(),
keywords={'caption': caption},
name='Estimated fatalities')
return R
def run(self, layers):
"""Risk plugin for flood population evacuation
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of population data on the same grid as H
Counts number of people exposed to flood levels exceeding
specified threshold.
Return
Map of population exposed to flood levels exceeding the threshold
Table with number of people evacuated and supplies required
"""
# Depth above which people are regarded affected [m]
threshold = 1.0 # Threshold [m]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Flood inundation [m]
population = get_exposure_layer(layers)
question = get_question(inundation.get_name(),
population.get_name(),
self)
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
# Calculate impact as population exposed to depths > threshold
P = population.get_data(nan=0.0, scaling=True)
I = numpy.where(D > threshold, P, 0)
M = numpy.where(D > 0.5, P, 0)
L = numpy.where(D > 0.3, P, 0)
# Count totals
total = int(numpy.sum(P))
evacuated = int(numpy.sum(I))
medium = int(numpy.sum(M)) - int(numpy.sum(I))
low = int(numpy.sum(L)) - int(numpy.sum(M))
# Don't show digits less than a 1000
if total > 1000:
total = total // 1000 * 1000
if evacuated > 1000:
evacuated = evacuated // 1000 * 1000
if medium > 1000:
medium = medium // 1000 * 1000
if low > 1000:
low = low // 1000 * 1000
# Calculate estimated needs based on BNPB Perka 7/2008 minimum bantuan
rice = evacuated * 2.8
drinking_water = evacuated * 17.5
water = evacuated * 67
family_kits = evacuated / 5
toilets = evacuated / 20
# Generate impact report for the pdf map
table_body = [question,
TableRow([_('People needing evacuation'),
'%i' % evacuated],
header=True),
TableRow(_('Map shows population density needing '
'evacuation'))]
#,
## TableRow([_('People in 50cm to 1m of water '),
## '%i' % medium],
## header=True),
## TableRow([_('People in 30cm to 50cm of water'),
## '%i' % low],
## header=True)]
## TableRow([_('Needs per week'), _('Total')],
## header=True),
## [_('Rice [kg]'), int(rice)],
## [_('Drinking Water [l]'), int(drinking_water)],
## [_('Clean Water [l]'), int(water)],
## [_('Family Kits'), int(family_kits)],
## [_('Toilets'), int(toilets)]]
impact_table = Table(table_body).toNewlineFreeString()
# Extend impact report for on-screen display
table_body.extend([TableRow(_('Notes:'), header=True),
_('Total population: %i') % total,
_('People need evacuation if flood levels '
'exceed %(eps)i m') % {'eps': threshold},
_('People in 50cm to 1m of water: %i') % medium,
_('People in 30cm to 50cm of water: %i') % low])
## _('Minimum needs are defined in BNPB '
## 'regulation 7/2008')])
impact_summary = Table(table_body).toNewlineFreeString()
map_title = _('People in need of evacuation')
style_info['legend_title'] = _('Population Density')
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name=_('Population which %s') % get_function_title(self),
keywords={'impact_summary': impact_summary,
'impact_table': impact_table,
'map_title': map_title},
style_info=style_info)
return R
def run(self, layers):
"""Separate exposed elements by depth [m]:
< 1 Rendah
1 - 3 Sedang
> 3 Tinggi
"""
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
I = H.interpolate(E, attribute_name='depth')
# Extract relevant numerical data
attributes = I.get_data()
N = len(I)
# List attributes to carry forward to result layer
attribute_names = E.get_attribute_names()
# Calculate building impact
rendah = 0
sedang = 0
tinggi = 0
building_impact = []
for i in range(N):
# Get the interpolated depth
x = float(attributes[i]['depth'])
# Assign impact level (nilai) depending on depth and count
if x < 1:
nilai = 1
rendah += 1
elif 1 <= x < 3:
nilai = 2
sedang += 1
else:
nilai = 3
tinggi += 1
# Record depth and impact level for this feature
building_impact.append({'depth': x,
self.target_field: nilai})
# Create summary report
Hname = H.get_name()
Ename = E.get_name()
table = ('<b>In case of "%s" the estimated impact to "%s" '
'the possibility of :</b><br><br><p>' % (Hname,
Ename))
table += ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
' <tr><td>%s :</td><td>%i</td></tr>'
'</table>' % (('Ketinggian Banjir'), ('Jumlah gedung'),
('All'), N,
('< 1 m'), rendah,
('1 - 3 m'), sedang,
('> 3 m'), tinggi))
table += '<br>' # Blank separation row
table += '<b>' + ('Based on BNPB Perka 2 - 2012') + '</b><br>'
# Create style
style_classes = [dict(label=('< 1 m'), min=1, max=1,
colour='#00FF00', # Green
transparency=0, size=1),
dict(label=('1 - 3 m'), min=2, max=2,
colour='#FFFF00', # Yellow
transparency=0, size=1),
dict(label=('> 3 m'), min=3, max=3,
colour='#FF0000', # Red
transparency=0, size=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=building_impact,
projection=E.get_projection(),
geometry=E.get_geometry(),
name=('Estimated buildings affected'),
keywords={'impact_summary': table},
style_info=style_info)
return V
def run(layers):
"""Risk plugin for tsunami building damage
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
H = H.interpolate(E, attribute_name='depth')
# Extract relevant numerical data
coordinates = E.get_geometry()
inundation = H.get_data()
# Calculate
N = len(H)
impact = []
for i in range(N):
#-------------------
# Extract parameters
#-------------------
depth = float(inundation[i]['depth'])
shore_distance = E.get_data('SHORE_DIST', i)
# FIXME: Get rid of the type casting when
# issue #66 is done
number_of_people_in_building = int(E.get_data('NEXIS_PEOP', i))
wall_type = E.get_data('WALL_TYPE', i)
contents_value = E.get_data('CONT_VALUE', i)
structure_value = E.get_data('STR_VALUE', i)
#------------------------
# Compute people affected
#------------------------
if 0.01 < depth < 1.0:
people_affected = number_of_people_in_building
else:
people_affected = 0
if depth >= 1.0:
people_severely_affected = number_of_people_in_building
else:
people_severely_affected = 0
#----------------------------------------
# Compute impact on buldings and contents
#----------------------------------------
depth_floor = depth - 0.3 # Adjust for floor height
if depth_floor >= 0.0:
buildings_inundated = 1
else:
buildings_inundated = 0
if depth_floor < 0.0:
structural_damage = contents_damage = 0.0
else:
# Water is deep enough to cause damage
if wall_type in struct_damage_curve:
curve = struct_damage_curve[wall_type]
else:
# Establish default for unknown wall type
curve = struct_damage_curve['Brick veneer']
structural_damage = curve(depth_floor)
contents_damage = contents_damage_curve(depth_floor)
#---------------
# Compute losses
#---------------
structural_loss = structural_damage * structure_value
contents_loss = contents_damage * contents_value
#-------
# Return
#-------
impact.append({'NEXIS_PEOP': number_of_people_in_building,
'PEOPLE_AFFECTED': people_affected,
'PEOPLE_SEV_AFFECTED': people_severely_affected,
'STRUCT_INUNDATED': buildings_inundated,
'STRUCT_DAMAGE_fraction': structural_damage,
'CONTENTS_DAMAGE_fraction': contents_damage,
'STRUCT_LOSS_AUD': structural_loss,
'CONTENTS_LOSS_AUD': contents_loss,
'DEPTH': depth})
# FIXME (Ole): Need helper to generate new layer using
# correct spatial reference
# (i.e. sensibly wrap the following lines)
V = Vector(data=impact, projection=E.get_projection(),
geometry=coordinates,
name='Estimated tsunami impact')
return V
def run(self, layers):
"""Risk plugin for Padang building survey
"""
# Extract data
H = get_hazard_layer(layers) # Ground shaking
E = get_exposure_layer(layers) # Building locations
datatype = E.get_keywords()['datatype']
if datatype.lower() == 'osm':
# Map from OSM attributes to the padang building classes
E = osm2padang(E)
vclass_tag = 'VCLASS'
elif datatype.lower() == 'sigab':
E = sigab2padang(E)
vclass_tag = 'VCLASS'
else:
vclass_tag = 'TestBLDGCl'
# Interpolate hazard level to building locations
H = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry()
shaking = H.get_data()
N = len(shaking)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building damage
count50 = 0
count25 = 0
count10 = 0
count0 = 0
building_damage = []
for i in range(N):
mmi = float(shaking[i].values()[0])
building_class = E.get_data(vclass_tag, i)
building_type = str(int(building_class))
damage_params = damage_curves[building_type]
beta = damage_params['beta']
median = damage_params['median']
percent_damage = cdf(mmi, mu=median, sigma=beta) * 100
# Collect shake level and calculated damage
result_dict = {self.target_field: percent_damage,
'MMI': mmi}
# Carry all orginal attributes forward
for key in attributes:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
building_damage.append(result_dict)
# Calculate statistics
if percent_damage < 10:
count0 += 1
if 10 <= percent_damage < 25:
count10 += 1
if 25 <= percent_damage < 50:
count25 += 1
if 50 <= percent_damage:
count50 += 1
# Create report
caption = ('<font size="3"> <table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s (<10%%):</td><td>%i</td></tr>'
' <tr><td>%s (10-25%%):</td><td>%i</td></tr>'
' <tr><td>%s (25-50%%):</td><td>%i</td></tr>'
' <tr><td>%s (50-100%%):</td><td>%i</td></tr>'
'</table></font>' % (_('Buildings'), _('Total'),
_('All'), N,
_('No damage'), count0,
_('Low damage'), count10,
_('Medium damage'), count25,
_('High damage'), count50))
# Create vector layer and return
V = Vector(data=building_damage,
projection=E.get_projection(),
geometry=coordinates,
name='Estimated pct damage',
keywords={'caption': caption})
return V
def run(self, layers):
"""Risk plugin for tsunami population
"""
# Extract data
H = get_hazard_layer(layers) # Depth
R = get_exposure_layer(layers) # Building locations
# Make the delta 10 times the size of the resolution.
delta = abs(H.get_geotransform()[1]) * 10
min_value, max_value = H.get_extrema()
E = convert_line_to_points(R, delta)
# Interpolate hazard level to building locations
H = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry()
depth = H.get_data()
N = len(depth)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
#print attributes
#print 'Number of population points', N
# Calculate population impact
road_impact = []
num_classes = 10
classes = range(num_classes)
difference = (max_value - min_value) / num_classes
for i in range(N):
dep = float(depth[i].values()[0])
affected = classes[0]
for level in classes:
normalized_depth = dep - min_value
level_value = level * difference
if normalized_depth > level_value:
affected = level
# Collect depth and calculated damage
result_dict = {'AFFECTED': affected,
'DEPTH': dep}
# Carry all original attributes forward
for key in attributes:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
road_impact.append(result_dict)
# Create report
impact_summary = ('')
# Create vector layer and return
V = Vector(data=road_impact,
projection=E.get_projection(),
geometry=coordinates,
name='Estimated roads affected',
keywords={'impact_summary': impact_summary})
return V
def run(self, layers):
"""Risk plugin for earthquake fatalities
Input
layers: List of layers expected to contain
H: Raster layer of flood depth
P: Raster layer of population data on the same grid as H
"""
# Depth above which people are regarded affected [m]
threshold = 1.5 # Threshold [m]
# Identify hazard and exposure layers
inundation = get_hazard_layer(layers) # Flood inundation [m]
population = get_exposure_layer(layers)
# Extract data as numeric arrays
D = inundation.get_data(nan=0.0) # Depth
# Calculate impact as population exposed to depths > threshold
if population.get_resolution(native=True, isotropic=True) < 0.0005:
# Keep this for backwards compatibility just a little while
# This uses the original custom population set and
# serves as a reference
P = population.get_data(nan=0.0) # Population density
pixel_area = 2500
I = numpy.where(D > threshold, P, 0) / 100000.0 * pixel_area
else:
# This is the new generic way of scaling (issue #168 and #172)
P = population.get_data(nan=0.0, scaling=True)
I = numpy.where(D > threshold, P, 0)
# Generate text with result for this study
total = str(int(numpy.sum(P) / 1000))
count = str(int(numpy.sum(I) / 1000))
# Create report
iname = inundation.get_name()
pname = population.get_name()
impact_summary = ('<b>Apabila terjadi "%s" perkiraan dampak '
'terhadap "%s" kemungkinan yang terjadi:'
'</b><br><br><p>' % (iname, pname))
impact_summary += ('<table border="0" width="320px">')
impact_summary += (' <tr><td><b>%s:</b></td>'
'<td align="right"><b>%s</b></td></tr>'
% ('Meninggal (x 1000)', count))
impact_summary += '</table>'
impact_summary += '<br>' # Blank separation row
impact_summary += '<b>Catatan:</b><br>'
impact_summary += '- Jumlah penduduk Jakarta %s<br>' % total
impact_summary += '- Jumlah dalam ribuan<br>'
impact_summary += ('- Penduduk dianggap meninggal ketika '
'banjir lebih dari %.1f m.' % threshold)
# Create raster object and return
R = Raster(I,
projection=inundation.get_projection(),
geotransform=inundation.get_geotransform(),
name='Penduduk yang %s' % (self.plugin_name.lower()),
keywords={'impact_summary': impact_summary},
style_info=style_info)
return R
def run(self, layers):
"""Risk plugin for tsunami population
"""
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
# Interpolate hazard level to building locations
Hi = H.interpolate(E)
# Extract relevant numerical data
coordinates = E.get_geometry()
depth = Hi.get_data()
N = len(depth)
# List attributes to carry forward to result layer
attributes = E.get_attribute_names()
# Calculate building impact according to guidelines
count3 = 0
count1 = 0
count0 = 0
population_impact = []
for i in range(N):
if H.is_raster:
# Get depth
dep = float(depth[i].values()[0])
# Classify buildings according to depth
if dep >= 3:
affected = 3 # FIXME: Colour upper bound is 100 but
count3 += 1 # does not catch affected == 100
elif 1 <= dep < 3:
affected = 2
count1 += 1
else:
affected = 1
count0 += 1
elif H.is_vector:
dep = 0 # Just put something here
cat = depth[i]['Affected']
if cat is True:
affected = 3
count3 += 1
else:
affected = 1
count0 += 1
# Collect depth and calculated damage
result_dict = {self.target_field: affected,
'DEPTH': dep}
# Carry all original attributes forward
for key in attributes:
result_dict[key] = E.get_data(key, i)
# Record result for this feature
population_impact.append(result_dict)
# Create report
if H.is_raster:
caption = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('ketinggian tsunami', 'Jumlah gedung',
'< 1 m', count0,
'1 - 3 m', count1,
'> 3 m', count3))
else:
caption = ('<table border="0" width="320px">'
' <tr><th><b>%s</b></th><th><b>%s</b></th></th>'
' <tr></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
' <tr><td>%s:</td><td>%i</td></tr>'
'</table>' % ('Terdampak oleh tsunami', 'Jumlah gedung',
'Terdampak', count3,
'Tidak terdampak', count0,
'Semua', N))
# Create vector layer and return
V = Vector(data=population_impact,
projection=E.get_projection(),
geometry=coordinates,
name='Estimate of buildings affected',
keywords={'caption': caption})
return V
def run(self, layers):
"""Flood impact to buildings (e.g. from Open Street Map)
"""
threshold = 1.0 # Flood threshold [m]
# Extract data
H = get_hazard_layer(layers) # Depth
E = get_exposure_layer(layers) # Building locations
question = get_question(H.get_name(),
E.get_name(),
self)
# Interpolate hazard level to building locations
if H.is_raster:
I = H.interpolate(E, attribute_name='depth')
hazard_type = 'depth'
else:
I = H.interpolate(E)
hazard_type = 'floodprone'
# Extract relevant exposure data
attribute_names = I.get_attribute_names()
attributes = I.get_data()
N = len(I)
# Calculate building impact
count = 0
buildings = {}
affected_buildings = {}
for i in range(N):
if hazard_type == 'depth':
# Get the interpolated depth
x = float(attributes[i]['depth'])
x = x > threshold
elif hazard_type == 'floodprone':
# Use interpolated polygon attribute
atts = attributes[i]
if 'FLOODPRONE' in atts:
res = atts['FLOODPRONE']
if res is None:
x = False
else:
x = res.lower() == 'yes'
else:
# If there isn't a flood prone attribute,
# assume that building is wet if inside polygon
# as flag by generic attribute AFFECTED
res = atts['Affected']
if res is None:
x = False
else:
x = res
else:
msg = (_('Unknown hazard type %s. '
'Must be either "depth" or "floodprone"')
% hazard_type)
raise Exception(msg)
# Count affected buildings by usage type if available
if 'type' in attribute_names:
usage = attributes[i]['type']
else:
usage = None
if usage is not None and usage != 0:
key = usage
else:
key = 'unknown'
if key not in buildings:
buildings[key] = 0
affected_buildings[key] = 0
# Count all buildings by type
buildings[key] += 1
if x is True:
# Count affected buildings by type
affected_buildings[key] += 1
# Count total affected buildings
count += 1
# Add calculated impact to existing attributes
attributes[i][self.target_field] = x
# Lump small entries and 'unknown' into 'other' category
for usage in buildings.keys():
x = buildings[usage]
if x < 25 or usage == 'unknown':
if 'other' not in buildings:
buildings['other'] = 0
affected_buildings['other'] = 0
buildings['other'] += x
affected_buildings['other'] += affected_buildings[usage]
del buildings[usage]
del affected_buildings[usage]
# Generate csv file of results
## fid = open('C:\dki_table_%s.csv' % H.get_name(), 'wb')
## fid.write('%s, %s, %s\n' % (_('Building type'),
## _('Temporarily closed'),
## _('Total')))
## fid.write('%s, %i, %i\n' % (_('All'), count, N))
# Generate simple impact report
table_body = [question,
TableRow([_('Building type'),
_('Temporarily closed'),
_('Total')],
header=True),
TableRow([_('All'), count, N])]
## fid.write('%s, %s, %s\n' % (_('Building type'),
## _('Temporarily closed'),
## _('Total')))
# Generate break down by building usage type is available
if 'type' in attribute_names:
# Make list of building types
building_list = []
for usage in buildings:
building_type = usage.replace('_', ' ')
# Lookup internationalised value if available
if building_type in internationalised_values:
building_type = internationalised_values[building_type]
else:
print ('WARNING: %s could not be translated'
% building_type)
building_list.append([building_type.capitalize(),
affected_buildings[usage],
buildings[usage]])
## fid.write('%s, %i, %i\n' % (building_type.capitalize(),
## affected_buildings[usage],
## buildings[usage]))
# Sort alphabetically
building_list.sort()
#table_body.append(TableRow([_('Building type'),
# _('Temporarily closed'),
# _('Total')], header=True))
table_body.append(TableRow(_('Breakdown by building type'),
header=True))
for row in building_list:
s = TableRow(row)
table_body.append(s)
## fid.close()
table_body.append(TableRow(_('Action Checklist:'), header=True))
table_body.append(TableRow(_('Are the critical facilities still '
'open?')))
table_body.append(TableRow(_('Notes:'), header=True))
assumption = _('Buildings are said to be flooded when ')
if hazard_type == 'depth':
assumption += _('flood levels exceed %.1f m') % threshold
else:
assumption += _('in areas marked as flood prone')
table_body.append(assumption)
impact_summary = Table(table_body).toNewlineFreeString()
impact_table = impact_summary
map_title = _('Buildings inundated')
# Create style
style_classes = [dict(label=_('Not Flooded'), min=0, max=0,
colour='#1EFC7C', transparency=0, size=1),
dict(label=_('Flooded'), min=1, max=1,
colour='#F31A1C', transparency=0, size=1)]
style_info = dict(target_field=self.target_field,
style_classes=style_classes)
# Create vector layer and return
V = Vector(data=attributes,
projection=I.get_projection(),
geometry=I.get_geometry(),
name=_('Estimated buildings affected'),
keywords={'impact_summary': impact_summary,
'impact_table': impact_table,
'map_title': map_title},
style_info=style_info)
return V
