def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
helper = PuliActionHelper(cleanTemp=True)
# convert the paths
prodPath = helper.mapPath(arguments[PROJECT])
arguments[RENDER_DIR] = helper.mapPath(arguments[RENDER_DIR])
arguments[SCENE] = helper.mapPath(arguments[SCENE])
env = helper.getEnv(am_version=arguments[ARNOLD_VERSION],
maya_version=arguments[MAYA_VERSION],
shave_version=arguments[SHAVE_VERSION],
crowd_version="",
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"),
use_shave=0)
# init log
helper.printStartLog("mayarunner", "v1.0")
cmdArgs = helper.buildMayaCommand("MikserActionMayaRender", arguments, [prodPath, arguments[SCENE]], env)
print "Executing command : %s" % str(cmdArgs)
comp = 0.1
updateCompletion(comp)
ret = helper.execute(cmdArgs, env)
print ret
def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
helper = PuliActionHelper()
###
#Pull info from decomposer
###
mayaScene = helper.mapPath(arguments[SCENE])
mayaSceneRootName = '3d_pr'
if mayaScene.count(mayaSceneRootName) == 0:
# TODO: a real mikser warning and exit
print 'Warning: unable to find the maya root directory'
#check existence and writability of render dir
renderDir = arguments[RENDER_DIR]
helper.checkExistenceOrCreateDir(renderDir, 'render dir')
if not os.access(renderDir, os.W_OK):
print 'Error: unable to write in %s' % renderDir
raise Exception
self.melArgs[1] = str(arguments[START])
self.melArgs[2] = str(arguments[END])
self.melArgs[5] = arguments[RENDER_DIR]
self.melArgs[7] = os.path.splitext(arguments[OUTPUT_IMAGE])[0]
try:
self.melArgs[3] = 'OneFile' if int(arguments[ONE_FILE]) == 1 else 'OneFilePerFrame'
except KeyError:
pass
self.updateMelArgs(11, SIMULATION_RATE, arguments)
self.updateMelArgs(12, SAVE_RATE, arguments)
self.updateMelArgs(16, DENSITY, arguments)
self.updateMelArgs(17, VELOCITY, arguments)
self.updateMelArgs(18, TEMPERATURE, arguments)
self.updateMelArgs(19, FUEL, arguments)
self.updateMelArgs(20, COLOR, arguments)
self.updateMelArgs(21, TEXTURE, arguments)
self.updateMelArgs(22, FALLOFF, arguments)
melArgsString = ' '.join(self.melArgs)
argsList = ['mel', melArgsString]
argsList += [FLUID, arguments[FLUID]]
readyForJsonArgs = '"%s"' % str(argsList) # this formatting is needed in MikserCommonRender.MikserCommonHeaderAndInit
###
#Env set up
###
prodPath = helper.mapPath(arguments[PROJECT])
env = helper.getEnv(maya_version=arguments['maya'],
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"))
###
#Additionnal arguments
###
# maya's python
if platform.system() == 'Linux':
mayaPython = env["MAYA_LOCATION"] + "/bin/python-bin"
else:
mayaPython = env["MAYA_LOCATION"] + "\\bin\\mayapy.exe"
# script doing the actual simulation baking process
mayaGenFluidScript = '/s/apps/lin/maya/scripts/MikserActionMayaGenFluidCache.py'
###
#Execute the command line
###
argsListN = [mayaPython, mayaGenFluidScript, readyForJsonArgs, prodPath, mayaScene]
print 'Launching maya python (%s)' % mayaPython
print 'With script: %s' % mayaGenFluidScript
print 'And arguments: %s' % readyForJsonArgs
print 'Using maya scene: %s' % mayaScene
updateCompletion(0)
helper.execute(argsListN, env=env)
# update the completion
updateCompletion(0.7)
###
#Check cache file existence
###
cacheFile = os.path.join(arguments[RENDER_DIR], arguments[OUTPUT_IMAGE]+'.xml')
if not os.path.exists(cacheFile):
print "Error: cache file %s has not been written" % cacheFile
raise Exception
###
#This is the end
###
print "\n\n---- %s has been written SUCCESSFULLY ----" % cacheFile
class NukeRunner(CommandRunner):
def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
self.helper = PuliActionHelper(cleanTemp=True)
# convert the paths
prodPath = self.helper.mapPath(arguments[PROJECT])
arguments[NUKE_SCENE] = self.helper.mapPath(arguments[NUKE_SCENE])
outImages = self.helper.mapPath(arguments[OUTPUT_IMAGES])
# set the env
env = self.helper.getEnv(nuke_rep=arguments[NUKE_VERSION],
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=self.helper.mapPath("/s/apps/lin"))
# init log
self.helper.printStartLog("NukeRunner", "1.2")
# replace the local nuke scene argument in the argslist
if outImages != "":
localNukeScene = self.updateOutputFiles(arguments[NUKE_SCENE], outImages, arguments[WRITE_NODE])
cmdArgs = self.helper.buildNukeCommand(arguments, localNukeScene)
updateCompletion(0.1)
updateMessage("Executing command %s" % cmdArgs)
print "\nExecuting command : %s\n" % cmdArgs
sys.stdout.flush()
out = subprocess.Popen(cmdArgs, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, bufsize=0, env=env)
begintime = time.time()
completedFrames = 0
totalFrames = (int(arguments[END]) - int(arguments[START]) + 1) // int(arguments[STEP])
if arguments.get("views", ''):
totalFrames = totalFrames * len(arguments["views"].split(","))
while True:
line = out.stdout.readline()
if not line:
break
print line,
sys.stdout.flush()
if re.match(FRAME_WRITE_PATTERN, line):
completedFrames += 1
print "%s -- frame %d of %d rendered --" % (time.strftime('[%H:%M:%S]', time.gmtime(time.time() - begintime)), completedFrames, totalFrames)
sys.stdout.flush()
updateMessage("%d frames rendered" % completedFrames)
updateCompletion(float(completedFrames) / totalFrames)
if completedFrames == totalFrames:
print "\nrender done."
updateMessage("render done.")
updateCompletion(1)
break
out.terminate()
if completedFrames != totalFrames:
raise Exception("Incomplete job: %d/%d images rendered" % (completedFrames, totalFrames))
def updateOutputFiles(self, srcNukeFilePath, outImages, writeNode):
if self.helper.isLinux():
tempDir = "/tmp"
else:
tempDir = "T:/Temp"
outImages = outImages.replace("\\", "/")
date = datetime.datetime.now()
dateStr = date.strftime("%d%m%Y_%H_%M_%S")
localNukeScene = os.path.join(tempDir, os.path.basename(srcNukeFilePath) + "_" + dateStr + ".nk")
## Creating render images dir
outFolder = os.path.dirname(outImages)
if "%v" in outFolder or "%V" in outFolder:
## test parsing views
srcNukeFile = open(srcNukeFilePath, 'r')
lines = srcNukeFile.readlines()
srcNukeFile.close()
lines.reverse()
index = lines.index(" name " + writeNode + "\n")
onlyLeft = False
onlyRight = False
for i in range(index, len(lines)):
if 'views {' in lines[i]:
if 'left' in lines[i]:
onlyLeft = True
else:
onlyRight = True
if 'Write {' in lines[i]:
break
if "%v" in outFolder:
if not onlyRight:
self.helper.checkExistenceOrCreateDir(outFolder.replace('%v', 'l'), "render dir left")
if not onlyLeft:
self.helper.checkExistenceOrCreateDir(outFolder.replace('%v', 'r'), "render dir right")
elif "%V" in outFolder:
if not onlyRight:
self.helper.checkExistenceOrCreateDir(outFolder.replace('%V', 'left'), "render dir left")
if not onlyLeft:
self.helper.checkExistenceOrCreateDir(outFolder.replace('%V', 'right'), "render dir right")
else:
self.helper.checkExistenceOrCreateDir(outFolder, 'render dir')
srcNukeFile = open(srcNukeFilePath, 'r')
## Creating nuke tmp out file in tempDir
dstNukeFile = open(localNukeScene, 'w')
## Copying nuke file in tempFile
contentStr = srcNukeFile.read()
srcNukeFile.close()
dstNukeFile.write(contentStr)
outImagesPadding = outImages.count("#")
if outImagesPadding:
outStrPadding = "%0" + str(outImagesPadding) + "d"
inStrPadding = ""
inStrPadding = inStrPadding.rjust(outImagesPadding, "#")
outImages = outImages.replace(inStrPadding, outStrPadding)
dstNukeFile.write("\n#### ADDED BY PULI : " + dateStr + " ###\n")
## Pre scripts
# dstNukeFile.write("\n## PRE SCRIPTS ###\n\n")
# for scripPath in inScripts:
# dstNukeFile.write("load \"" + scripPath + "\"\n")
# Write Node
dstNukeFile.write("\n## WRITE NODE ###\n")
dstNukeFile.write("\nknob " + writeNode + ".file \"" + outImages + "\"\n")
print "\nLocal Nuke scene created : '" + localNukeScene + "'."
dstNukeFile.close()
return localNukeScene
def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
helper = PuliActionHelper(cleanTemp = True)
start = int(arguments[START])
end = int(arguments[END])
padding = int(arguments[PADDING])
prefix = str(arguments[OUTPUT_IMAGE])
# convert the paths
prodPath = helper.mapPath(arguments[PROJECT])
arguments[RENDER_DIR] = helper.mapPath(arguments[RENDER_DIR])
arguments[SCENE] = helper.mapPath(arguments[SCENE])
# set the env
env = helper.getEnv(am_version=arguments[ARNOLD_VERSION],
maya_version=arguments[MAYA_VERSION],
shave_version=arguments[SHAVE_VERSION],
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"))
helper.printStartLog("MentalRayRunner", "v1.1")
cmdArgs = helper.buildMayaCommand("MikserActionMentalRayRender", arguments, [prodPath, arguments[SCENE]], env)
print "Executing command : %s" % str(cmdArgs)
comp = 0.1
updateCompletion(comp)
ret = helper.execute(cmdArgs, env)
if ret != 0:
raise Exception("A problem occured in the render script, see log")
# check images
layer2Render = []
if RENDER_LAYERS in arguments:
layer2Render = str(arguments[RENDER_LAYERS]).split(",")
if len(layer2Render):
for layer in layer2Render:
for frameInt in range(start, end+1):
frameStr = str(frameInt).rjust(padding, "0")
# FIXME improve this...
# check the file
if layer == "defaultRenderLayer":
layerfolder = "masterLayer"
else:
layerfolder = layer
renderdir = str(arguments[RENDER_DIR]) + "/" + layerfolder + "/"
filename = renderdir + prefix + "-" + layer + "." + frameStr + "." + str(arguments[FORMAT])
print "Checking \"%s\"..." % filename
if not os.path.isfile(filename):
raise Exception("File does not exist")
else:
print "OK."
else:
for frameInt in range(start, end+1):
frameStr = str(frameInt).rjust(padding, "0")
# check the file
filename = str(arguments[RENDER_DIR]) + "/" + prefix + "." + frameStr + "." + str(arguments[FORMAT])
print "Checking \"%s\"..." % filename
if not os.path.isfile(filename):
raise Exception("File does not exist")
else:
print "OK."
updateCompletion(1)
print "\nrender done."
def execute(self, arguments, updateCompletion, updateMessage):
frameCompletionPattern = re.compile("\| (.*)% done .* rays/pixel")
# init the helper
helper = PuliActionHelper(cleanTemp=True)
# convert the paths
projPath = helper.mapPath(arguments[PROJECT])
prodPath = helper.mapPath(arguments[PROD])
arguments[OUTPUT_ASS_FILE] = helper.mapPath(arguments[OUTPUT_ASS_FILE])
arguments[RENDER_DIR] = helper.mapPath(arguments[RENDER_DIR])
arguments[SCENE] = helper.mapPath(arguments[SCENE])
# set the env
use_shave = 0
if MTOA_EXTENSIONS in arguments.keys() and SHAVE_VERSION in arguments[MTOA_EXTENSIONS]:
use_shave = 1
crowd_version = ""
if CROWD_VERSION in arguments.keys():
crowd_version = arguments[CROWD_VERSION]
env = helper.getEnv(am_version=arguments[ARNOLD_VERSION],
maya_version=arguments[MAYA_VERSION],
shave_version=arguments[SHAVE_VERSION],
crowd_version=crowd_version,
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"),
use_shave=use_shave)
# init log
helper.printStartLog("mtoarunner", "v2.1")
# check existence of output ass folders
helper.checkExistenceOrCreateDir(arguments[OUTPUT_ASS_FILE], "output ass folder")
helper.checkExistenceOrCreateDir(arguments[RENDER_DIR], "render dir")
# MtoA Extensions
extensionsNodesSearchPath = []
if MTOA_EXTENSIONS in arguments.keys():
xtensions = arguments[MTOA_EXTENSIONS]
addonPath = env["ARNOLD_LOCATION"] + "/add-ons"
if xtensions == "<All>":
# List directories in add-ons to add all extensions
print "Will force load of all MtoA extensions available :"
if not os.path.isdir(addonPath):
print "No Extension dir found"
else:
print "Search in " + addonPath
fileList = os.listdir(addonPath)
if fileList:
fileList.sort()
nb = 0
for nb, extfile in enumerate(fileList):
if os.path.isdir(addonPath + "/" + extfile):
print " [ %s ]" % (extfile)
arguments['le'] = extfile
if os.path.isdir(os.path.join(addonPath, extfile, "nodes")):
extensionsNodesSearchPath += ["-l", os.path.join(addonPath, extfile, "nodes")]
if nb == 0:
extStr = extfile
else:
extStr = extStr + ',' + extfile
if nb:
arguments['le'] = extStr
else:
print "No Extension found"
else:
print "Empty directory."
else:
lesExt = xtensions.split(",")
for xt in lesExt:
extName = xt.strip()
if extName:
print "Will force load of MtoA Extension : [ %s ]" % (extName)
if os.path.isdir(os.path.join(addonPath, extName, "nodes")):
extensionsNodesSearchPath += ["-l", os.path.join(addonPath, extName, "nodes")]
arguments['le'] = xtensions
# Add arg to write outputs image files list
outputsFile = '/datas/tmp/filestocheck_' + datetime.datetime.now().strftime('%y%m%d_%H%M%S')
arguments['ifo'] = outputsFile
cmdArgs = helper.buildMayaCommand("MikserActionMtoARender", arguments, [projPath, arguments[SCENE]], env)
# Execute the command line that will export the ass
print '\nLaunch export command "%s"' % cmdArgs
comp = 0.0
updateCompletion(comp)
ret = helper.execute(cmdArgs, env=env)
print '===================================================='
print ' MikserActionMtoARender returns with code %d' % (ret)
print '===================================================='
if ret != 0:
print ' Export failed, exiting...'
raise Exception(' Export failed, exiting...')
# update the completion
#comp = 0.3
#updateCompletion(comp)
# Extra kick flags
extraKickFlags = []
if EXTRA_KICK_FLAGS in arguments.keys():
extraKickFlags = self.parseExtraKickArgs(arguments[EXTRA_KICK_FLAGS])
# kick the ass to render images
# kick -l /s/apps/arnold/mArny2.27.21/shaders ./RE-sq14sh20-all_z-v002.1019.ass -dcau -log -v 2
# au lieu de
# kick -nstdin -dp -i /datas/tmp/assfiles/RE-sq14sh20-all_z-v002.1019.ass
start = int(arguments[START])
end = int(arguments[END])
totalFrames = end - start + 1
tiledDestination = arguments[RENDER_DIR] + "_Tiled"
helper.checkExistenceOrCreateDir(tiledDestination, "tiled directory")
for frameInt in range(start, end + 1):
argList = [env["ARNOLD_LOCATION"] + "/bin/kick"]
frameStr = str(frameInt).rjust(int(arguments[PADDING]), "0")
# add the arguments to the kick command line
argList += ["-l", env["ARNOLD_LOCATION"] + "/nodes"]
# add extensions paths
argList += extensionsNodesSearchPath
assFilePath = arguments[OUTPUT_ASS_FILE] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + ".ass"
# support for compress ass
if COMPRESS_ASS in arguments.keys():
if int(arguments[COMPRESS_ASS]):
assFilePath += ".gz"
if assFilePath.find(" ") != -1:
assFilePath = "\"" + assFilePath + "\""
argList += [assFilePath]
argList += ["-nokeypress"]
argList += ["-dp"]
argList += ["-dw"]
argList += ["-log"]
# no license check
if NO_LIC_CHECK in arguments.keys():
if int(arguments[NO_LIC_CHECK]):
argList += ["-sl"]
# verbose level
if VERBOSE_LEVEL in arguments.keys():
argList += ["-v", str(arguments[VERBOSE_LEVEL])]
# number of threads
if NUMBER_OF_THREADS in arguments.keys():
argList += ["-t", str(arguments[NUMBER_OF_THREADS])]
# Extra kick flags
argList += extraKickFlags
# kick the command
print "\nKicking command : " + " ".join(argList)
#kickret = helper.execute(argList, env=env)
out = subprocess.Popen(argList, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, bufsize=0, env=env)
rc = None
while rc is None:
line = out.stdout.readline()
if not line:
break
print line,
sys.stdout.flush()
fcp = frameCompletionPattern.search(line)
if fcp:
framecomp = float(fcp.group(1).strip())
fc = float(framecomp / 100) / float(totalFrames)
updateCompletion(comp + fc)
rc = out.poll()
out.communicate()
rc = out.poll()
print '===================================================='
print ' kick command returns with code %d' % rc
print '===================================================='
if rc != 0:
print ' Kick command failed...'
raise Exception(' Kick command failed...')
comp += 1.0 / float(totalFrames)
# suppression of ass files
if not int(arguments[LEAVE_ASS_FILES]):
try:
os.remove(assFilePath)
except OSError:
print "\nFailed to remove '" + assFilePath + "'\n"
else:
print "\nLeaving Ass extfile on disk : '" + assFilePath + "'\n"
# Check the output image files by reading outputs extfile
# Make them scanlined if in exr format
self.invertedFormatsMap = {'1': 'jpg', '2': 'tif', '3': 'exr', '4': 'png'}
print "\nCheck render outputs :"
outputsByFrame = outputsFile + '.' + frameStr
lines = []
try:
outputsFileHdl = open(outputsByFrame, "r")
lines = outputsFileHdl.readlines()
outputsFileHdl.close()
except IOError:
filename = arguments[RENDER_DIR] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + "." + self.invertedFormatsMap[str(arguments[FORMAT])]
lines = [filename]
for line in lines:
# Check
filename = line.rstrip()
print "> %s" % filename
if not os.path.exists(filename):
raise Exception("file does not exist!")
print " OK."
# exrmakescanlined
make_scanlined = 1
if MAKE_SCANLINED in arguments:
make_scanlined = int(arguments[MAKE_SCANLINED])
if make_scanlined:
extension = os.path.splitext(filename)[1][1:]
if extension == 'exr':
print " Make exr scanlined..."
exrscanlinedCmdArgs = ["/s/apps/lin/bin/exrmakescanlined"]
exrscanlinedCmdArgs.append("-v")
exrscanlinedCmdArgs.append(filename)
dest = '/tmp/' + os.path.basename(filename)
exrscanlinedCmdArgs.append(dest)
output, error = subprocess.Popen(exrscanlinedCmdArgs, stdout=subprocess.PIPE, stderr=subprocess.PIPE).communicate()
#print output
if "nothing to do" in output:
print " Nothing to do."
elif error:
print output
print error
else:
# move the extfile in a tiled dir and replace it with the new extfile
oldy = filename.replace(arguments[RENDER_DIR], tiledDestination)
print ' Replace image by scanlined version and move it to : '
print ' ' + oldy
shutil.move(filename, oldy)
shutil.move(dest, filename)
# idiff comparison
idiffcmd = ["/s/apps/lin/bin/idiff"]
idiffcmd.append(filename)
idiffcmd.append(oldy)
devnull = open('/dev/null', 'w')
idiffret = subprocess.Popen(idiffcmd, env=os.environ, stdout=devnull).wait()
#idiffret = helper.execute(idiffcmd, env=os.environ)
# if no difference, delete the tiled version
if idiffret == 0:
print " idiff : Tiled and Scanlined images match, removing Tiled version..."
os.remove(oldy)
print " Tiled version removed."
# FIXME check permissions
import stat
st = os.stat(filename)
if not bool(st.st_mode & stat.S_IRGRP) or not bool(st.st_mode & stat.S_IWGRP):
logtemp = open("/s/apps/lin/puli/tmplog.csv", 'a')
import socket
logtemp.write("%s\t%s\t%s\tmtoa\t%s\t%s\n" % (filename, socket.gethostname(), os.path.basename(prodPath), oct(stat.S_IMODE(st.st_mode)), time.strftime('%H:%M', time.localtime())))
logtemp.close()
# Suppress image outputs list
try:
os.remove(outputsByFrame)
except OSError:
print "\nFailed to remove %s\n" % outputsByFrame
# update completion
#comp += 0.7 / totalFrames
#updateCompletion(comp)
updateCompletion(1)
print "\nrender done."
def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
helper = PuliActionHelper()
# convert the paths
prodPath = helper.mapPath(arguments[PROJECT])
env = helper.getEnv(am_version=arguments[ARNOLD_VERSION],
maya_version=arguments[MAYA_VERSION],
shave_version=arguments[SHAVE_VERSION],
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"))
# this is necessary for the python-bin of maya to work properly
env["PYTHONHOME"] = env["MAYA_LOCATION"]
# init log
helper.printStartLog("MarnyRunner", "v1.1")
# check existence of output ass folders
helper.checkExistenceOrCreateDir(arguments[OUTPUT_ASS_FILE], "output ass folder")
helper.checkExistenceOrCreateDir(arguments[RENDER_DIR], "render dir")
cmdArgs = helper.buildMayaCommand("MikserActionMarnyRender", arguments, None, env)
# Execute the command line that will export the ass
updateCompletion(0)
helper.execute(cmdArgs, env=env)
# update the completion
comp = 0.3
updateCompletion(comp)
# kick the ass to render images
# kick -l /s/apps/arnold/mArny2.27.21/shaders ./RE-sq14sh20-all_z-v002.1019.ass -dcau -log -v 2
# au lieu de
# kick -nstdin -dp -i /tmp/assfiles/RE-sq14sh20-all_z-v002.1019.ass
start = int(arguments[START])
end = int(arguments[END]) + 1
for frameInt in range(start, end):
argList = [env["ARNOLD_LOCATION"] + "/bin/kick"]
frameStr = str(frameInt).rjust(int(arguments[PADDING]), "0")
# add the arguments to the kick command line
argList += ["-l", env["ARNOLD_LOCATION"] + "/shaders"]
assFilePath = arguments[OUTPUT_ASS_FILE] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + ".ass"
if assFilePath.find(" ") != -1:
assFilePath = "\"" + assFilePath + "\""
argList += [assFilePath]
argList += ["-dcau"]
argList += ["-log"]
argList += ["-%s" % VERBOSE_LEVEL, "2"]
# kick the command
print "\nKicking command : " + " ".join(argList)
kickOut = subprocess.Popen(argList, close_fds=True, env=env)
kickOut.communicate()
# check the file
filename = arguments[RENDER_DIR] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + "." + str(arguments[FORMAT])
print "Checking \"%s\"..." % filename
if not os.path.exists(filename):
raise Exception
print "OK."
# update completion
comp += 0.7 / (end - start)
updateCompletion(comp)
updateCompletion(1)
print "\nrender done."
def execute(self, arguments, updateCompletion, updateMessage):
# init the helper
helper = PuliActionHelper()
# convert the paths
prodPath = helper.mapPath(arguments[PROD])
arguments[OUTPUT_ASS_FILE] = helper.mapPath(arguments[OUTPUT_ASS_FILE])
arguments[RENDER_DIR] = helper.mapPath(arguments[RENDER_DIR])
arguments[SCENE] = helper.mapPath(arguments[SCENE])
projPath = os.path.dirname(arguments[SCENE].split('scenes')[0])
cameras = arguments["cam"].split(',')
# init log
helper.printStartLog("mtoa_sa runner", "v0.0")
# check existence of output ass folders
helper.checkExistenceOrCreateDir(arguments[OUTPUT_ASS_FILE], "output ass folder")
helper.checkExistenceOrCreateDir(arguments[RENDER_DIR], "render dir")
env = helper.getEnv(am_version=arguments[ARNOLD_VERSION],
maya_version=arguments[MAYA_VERSION],
shave_version=arguments[SHAVE_VERSION],
crowd_version=arguments[CROWD_VERSION],
home=os.environ["HOME"],
job=os.path.basename(prodPath),
jobdrive=os.path.dirname(prodPath),
applis=helper.mapPath("/s/apps/lin"),
use_shave=0)
#
print "Forcing custom mtoa variables"
env['ARNOLD_LOCATION'] = '/s/apps/lin/arnold/mtoa0.22.0'
self.setSolidAngleEnv(env, 'AM_DRIVE', env["ARNOLD_LOCATION"])
self.setSolidAngleEnv(env, 'MAYA_MODULE_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"])
self.setSolidAngleEnv(env, 'PYTHONPATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/scripts')
self.setSolidAngleEnv(env, 'MAYA_PRESET_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/presets')
self.setSolidAngleEnv(env, 'XBMLANGPATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/icons/%B')
self.setSolidAngleEnv(env, 'MAYA_PLUG_IN_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/plug-ins')
self.setSolidAngleEnv(env, 'LD_LIBRARY_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/lib')
self.setSolidAngleEnv(env, 'ARNOLD_PLUGIN_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/shaders')
self.setSolidAngleEnv(env, 'MAYA_RENDER_DESC', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"])
self.setSolidAngleEnv(env, 'PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/bin')
self.setSolidAngleEnv(env, 'MAYA_SCRIPT_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/scripts/mtoa/2013/mel')
self.setSolidAngleEnv(env, 'MAYA_SCRIPT_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/scripts')
self.setSolidAngleEnv(env, 'MAYA_PLUG_IN_RESOURCE_PATH', env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + '/resources')
self.setSolidAngleEnv(env, 'ARNOLD_LICENSE_PORT', '5053')
self.setSolidAngleEnv(env, 'ARNOLD_LICENSE_HOST', 'jacket')
print "################################################"
print " ASS EXPORT:", int(arguments.get(GENERATE_ASS_FILE, '1'))
print " KICK:", int(arguments.get(LAUNCH_KICK, '1'))
print "################################################"
if int(arguments.get(GENERATE_ASS_FILE, '1')):
#if exportTest:
#+/+Mikanada+/+
cmdArgs = helper.buildMayaCommand("MikserActionMtoA_SARender", arguments, [projPath, arguments[SCENE]], env)
# Execute the command line that will export the ass
print '\nLaunch export command "%s"' % cmdArgs
comp = 0
updateCompletion(comp)
startTime = time.time()
ret = helper.execute(cmdArgs, env=env)
print '===================================================='
print ' MikserActionMtoA_SARender returns with code %d' % (ret)
print ' Process took %s s' %str(time.time() - startTime).split('.')[0]
print '===================================================='
#
# mtoa exits with an error code.... Arrrrhhh
#
if ret != 0:
print 'Warning, maya has been quit with an error code'
# Extra kick flags
extraKickFlags = []
if EXTRA_KICK_FLAGS in arguments.keys():
extraKickFlags = self.parseExtraKickArgs(arguments[EXTRA_KICK_FLAGS])
# kick the ass to render images
# kick -l /s/apps/arnold/mArny2.27.21/shaders ./RE-sq14sh20-all_z-v002.1019.ass -dcau -log -v 2
# au lieu de
# kick -nstdin -dp -i /datas/tmp/assfiles/RE-sq14sh20-all_z-v002.1019.ass
start = int(arguments[START])
end = int(arguments[END])
totalFrames = end - start + 1
frameCompletionPattern = re.compile("\| (.*)% done .* rays/pixel")
argList = [ env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + "/bin/kick"]
argList += ["-l", env["ARNOLD_LOCATION"] + '/' + env["MAYA_VERSION"] + "/shaders"]
argList += ["-nokeypress"]
argList += ["-dp"]
argList += ["-dw"]
argList += ["-log"]
# no license check
if NO_LIC_CHECK in arguments.keys():
if int(arguments[NO_LIC_CHECK]):
argList += ["-sl"]
# verbose level
if VERBOSE_LEVEL in arguments.keys():
argList += ["-v", str(arguments[VERBOSE_LEVEL])]
# number of threads
if NUMBER_OF_THREADS in arguments.keys():
argList += ["-t", str(arguments[NUMBER_OF_THREADS])]
# anti-aliasing samples
if ANTI_ALIASING_SAMPLES in arguments.keys():
argList += ["-as", str(arguments[ANTI_ALIASING_SAMPLES])]
# Extra kick flags
argList += extraKickFlags
for frameInt in range(start, end + 1):
frameStr = str(frameInt).rjust(int(arguments[PADDING]), "0")
# add the arguments to the kick command line
assFilePath = arguments[OUTPUT_ASS_FILE] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + ".ass"
# support for compress ass
if COMPRESS_ASS in arguments.keys():
if int(arguments[COMPRESS_ASS]):
assFilePath += ".gz"
if assFilePath.find(" ") != -1:
assFilePath = "\"" + assFilePath + "\""
cmdList = argList[:]
cmdList.append(assFilePath)
# kick the command
print "\nKicking command : " + " ".join(cmdList)
os.umask(2)
out = subprocess.Popen(cmdList, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, bufsize=0, env=env)
rc = None
while rc is None:
line = out.stdout.readline()
if not line:
break
print line,
sys.stdout.flush()
fcp = frameCompletionPattern.search(line)
if fcp:
framecomp = float(fcp.group(1).strip())
fc = float(framecomp / 100) / float(totalFrames)
updateCompletion(comp + fc)
rc = out.poll()
out.communicate()
rc = out.poll()
print '===================================================='
print ' kick command returns with code %d' % rc
print '===================================================='
if rc != 0:
print ' Kick command failed...'
raise Exception(' Kick command failed...')
comp += 1.0 / float(totalFrames)
# suppression of ass files
if not int(arguments[LEAVE_ASS_FILES]):
try:
os.remove(assFilePath)
except OSError:
print "\nFailed to remove '" + assFilePath + "'\n"
else:
print "\nLeaving Ass file on disk : '" + assFilePath + "'\n"
self.invertedFormatsMap = {'1': 'jpg', '2': 'tif', '3': 'exr', '4': 'png'}
filename = arguments[RENDER_DIR] + "/" + arguments[OUTPUT_IMAGE] + "." + frameStr + "." + self.invertedFormatsMap[str(arguments[FORMAT])]
# Check file existence
filename = filename.rstrip()
print "> %s" % filename
if not os.path.exists(filename):
raise Exception("file does not exist!")
print " OK."
# exrmakescanlined
make_scanlined = 1
if MAKE_SCANLINED in arguments and os.path.splitext(filename)[1][1:] == 'exr':
print " Make exr scanlined..."
exrscanlinedCmdArgs = ["/s/apps/lin/bin/exrmakescanlined-test"]
exrscanlinedCmdArgs.append("-c")
exrscanlinedCmdArgs.append(filename)
tf = tempfile.NamedTemporaryFile(prefix='/tmp/')
dest = tf.name
tf.close()
exrscanlinedCmdArgs.append(dest)
subp = subprocess.Popen(exrscanlinedCmdArgs, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
output, error = subp.communicate()
if subp.returncode == 0:
# idiff comparison
idiffcmd = ["/s/apps/lin/bin/idiff-1.1.7"]
idiffcmd.append(filename)
idiffcmd.append(dest)
devnull = open('/dev/null', 'w')
idiffret = subprocess.Popen(idiffcmd, env=os.environ, stdout=devnull).wait()
if True:
print " idiff : tiled and scanlined images match, replacing the tiled version..."
shutil.move(dest, filename+".tmp")
os.rename(filename+".tmp", filename)
print " tiled version overwritten"
else :
print " idiff : Keeping Tiled version : images do not match !!!"
# FIXME check permissions
import stat
st = os.stat(filename)
if not bool(st.st_mode & stat.S_IRGRP) or not bool(st.st_mode & stat.S_IWGRP):
logtemp = open("/s/apps/lin/puli/tmplog.csv", 'a')
import socket
logtemp.write("%s\t%s\t%s\tmtoa\t%s\t%s\n" % (filename, socket.gethostname(), os.path.basename(prodPath), oct(stat.S_IMODE(st.st_mode)), time.strftime('%H:%M', time.localtime())))
logtemp.close()
elif subp.returncode == 1:
print " Nothing to do."
elif error:
print error
else:
print "an error has occured, keeping the tiled version"
updateCompletion(1)
print "\nrender done."