def hamming_distance_to_true_naive(self, true_line, line, query_name, restrict_to_region='', normalize=False, padfo=None, debug=False):
"""
Hamming distance between the inferred naive sequence and the tue naive sequence.
<restrict_to_region> if set, restrict the comparison to the section of the *true* sequence assigned to the given region.
NOTE this will not in general correspond to the similarly-assigned region in the inferred naive sequence.
if <normalize> divide by sequence length
"""
true_naive_seq = utils.get_full_naive_seq(self.germlines, true_line)
inferred_naive_seq = utils.get_full_naive_seq(self.germlines, line)
left_hack_add_on = ''
right_hack_add_on = ''
if len(true_line['seq']) > len(line['seq']): # ihhhmmm doesn't report the bits of the sequence it erodes off the ends, so we have to add them back on
# if len(true_naive_seq) > len(inferred_naive_seq): # hm, now why did I use line['seq'] stuff before?
start = true_line['seq'].find(line['seq'])
assert start >= 0
end = len(line['seq']) + start
left_hack_add_on = true_line['seq'][: start]
right_hack_add_on = true_line['seq'][ end :]
# extra_penalty = len(left_hack_add_on) + len(right_hack_add_on)
inferred_naive_seq = 'N'*len(left_hack_add_on) + inferred_naive_seq + 'N'*len(right_hack_add_on)
if debug:
print ' adding to inferred naive seq'
# if restrict_to_region == '':
# print ' before', inferred_naive_seq
if padfo is not None: # remove N padding from the inferred sequence
inferred_naive_seq = inferred_naive_seq[padfo['padleft'] : ]
if padfo['padright'] > 0:
inferred_naive_seq = inferred_naive_seq[ : -padfo['padright']]
# if restrict_to_region == '':
# print ' after ', inferred_naive_seq
bounds = None
if restrict_to_region != '':
bounds = utils.get_regional_naive_seq_bounds(restrict_to_region, self.germlines, true_line) # get the bounds of this *true* region
true_naive_seq = true_naive_seq[bounds[0] : bounds[1]]
inferred_naive_seq = inferred_naive_seq[bounds[0] : bounds[1]]
if debug:
print restrict_to_region, 'region, bounds', bounds
print ' true ', true_naive_seq
print ' infer', inferred_naive_seq
if len(true_naive_seq) != len(inferred_naive_seq):
raise Exception('still not the same lengths for %s\n %s\n %s' % (query_name, true_naive_seq, inferred_naive_seq))
fraction, len_excluding_ambig = utils.hamming_fraction(true_naive_seq, inferred_naive_seq, return_len_excluding_ambig=True)
total_distance = int(fraction * len_excluding_ambig)
if len(true_naive_seq) == 0:
print 'WARNING zero length sequence in hamming_distance_to_true_naive'
return 0
if normalize:
return int(100 * (float(total_distance) / len(true_naive_seq)))
else:
return total_distance
def hamming_distance_to_true_naive(self, true_line, line, query_name, restrict_to_region='', normalize=False, debug=False):
"""
Hamming distance between the inferred naive sequence and the tue naive sequence.
<restrict_to_region> if set, restrict the comparison to the section of the *true* sequence assigned to the given region.
NOTE this will not in general correspond to the similarly-assigned region in the inferred naive sequence.
if <normalize> divide by sequence length
"""
true_naive_seq = utils.get_full_naive_seq(self.germlines, true_line)
inferred_naive_seq = utils.get_full_naive_seq(self.germlines, line)
left_hack_add_on = ''
right_hack_add_on = ''
if len(true_line['seq']) > len(line['seq']): # ihhhmmm doesn't report the bits of the sequence it erodes off the ends, so we have to add them back on
# if len(true_naive_seq) > len(inferred_naive_seq): # hm, now why I did use line['seq'] stuff before?
start = true_line['seq'].find(line['seq'])
assert start >= 0
end = len(line['seq']) + start
left_hack_add_on = true_line['seq'][: start]
right_hack_add_on = true_line['seq'][ end :]
# extra_penalty = len(left_hack_add_on) + len(right_hack_add_on)
inferred_naive_seq = 'x'*len(left_hack_add_on) + inferred_naive_seq + 'x'*len(right_hack_add_on)
if debug:
print ' adding to inferred naive seq'
bounds = None
if restrict_to_region != '':
bounds = utils.get_regional_naive_seq_bounds(restrict_to_region, self.germlines, true_line) # get the bounds of this *true* region
true_naive_seq = true_naive_seq[bounds[0] : bounds[1]]
inferred_naive_seq = inferred_naive_seq[bounds[0] : bounds[1]]
# if len(true_naive_seq) > len(inferred_naive_seq):
if debug:
print restrict_to_region, 'region, bounds', bounds
print ' true ', true_naive_seq
print ' infer', inferred_naive_seq
if len(true_naive_seq) != len(inferred_naive_seq):
print 'ERROR still not the same lengths for %s' % query_name
print ' true ', true_naive_seq
print ' infer', inferred_naive_seq
sys.exit()
total_distance = utils.hamming(true_naive_seq, inferred_naive_seq)
if len(true_naive_seq) == 0:
print 'WARNING zero length sequence in hamming_distance_to_true_naive'
return 0
if normalize:
return int(100 * (float(total_distance) / len(true_naive_seq)))
else:
return total_distance
def hamming_distance_to_true_naive(self, true_line, line, query_name, restrict_to_region='', normalize=False, padfo=None, debug=False):
"""
Hamming distance between the inferred naive sequence and the tue naive sequence.
<restrict_to_region> if set, restrict the comparison to the section of the *true* sequence assigned to the given region.
NOTE this will not in general correspond to the similarly-assigned region in the inferred naive sequence.
if <normalize> divide by sequence length
"""
true_naive_seq = utils.get_full_naive_seq(self.germlines, true_line)
inferred_naive_seq = utils.get_full_naive_seq(self.germlines, line)
if len(true_naive_seq) != len(inferred_naive_seq):
print '%20s true inf' % ''
for k in true_line:
print '%20s %s' % (k, true_line[k]),
if k in line:
print ' %s' % line[k]
else:
print ' NOPE'
for k in line:
if k not in true_line:
print ' not in true line %20s %s' % (k, line[k])
raise Exception('%s true and inferred sequences not the same length\n %s\n %s\n' % (line['unique_id'], true_naive_seq, inferred_naive_seq))
# assert False # read through this whole damn thing and make sure it's ok
left_hack_add_on = ''
right_hack_add_on = ''
# if len(true_line['seq']) > len(utils.remove_ambiguous_ends(line['seq'], line['fv_insertion'], line['jf_insertion'])): # ihhhmmm doesn't report the bits of the sequence it erodes off the ends, so we have to add them back on
# # if len(true_naive_seq) > len(inferred_naive_seq): # hm, now why did I use line['seq'] stuff before?
# assert False
# start = true_line['seq'].find(line['seq'])
# assert start >= 0
# end = len(line['seq']) + start
# left_hack_add_on = true_line['seq'][: start]
# right_hack_add_on = true_line['seq'][ end :]
# # extra_penalty = len(left_hack_add_on) + len(right_hack_add_on)
# inferred_naive_seq = 'N'*len(left_hack_add_on) + inferred_naive_seq + 'N'*len(right_hack_add_on)
# if debug:
# print ' adding to inferred naive seq'
if padfo is not None: # remove N padding from the inferred sequence
if debug:
print 'removing padfo'
print inferred_naive_seq
if inferred_naive_seq[padfo['padleft'] : ].count('N') == padfo['padleft']: # this fails to happen if reset_effective_erosions_and_effective_insertions already removed the Ns
inferred_naive_seq = inferred_naive_seq[padfo['padleft'] : ]
elif debug: # NOTE if no debug, we just fall through, which isok
print 'tried to remove non Ns!\n %s\n padleft %d\n' % (inferred_naive_seq, padfo['padleft'])
if padfo['padright'] > 0:
if inferred_naive_seq[ : padfo['padright']].count('N') == padfo['padright']: # this fails to happen if reset_effective_erosions_and_effective_insertions already removed the Ns
inferred_naive_seq = inferred_naive_seq[ : -padfo['padright']]
elif debug: # NOTE if no debug, we just fall through, which isok
print 'tried to remove non Ns!\n %s\n padright %d\n' % (inferred_naive_seq, padfo['padright'])
if debug:
print padfo['padleft'] * ' ' + inferred_naive_seq + padfo['padleft'] * ' '
bounds = None
if restrict_to_region != '':
bounds = utils.get_regional_naive_seq_bounds(restrict_to_region, self.germlines, true_line) # get the bounds of this *true* region
if debug:
print 'restrict to %s' % restrict_to_region
utils.color_mutants(true_naive_seq, inferred_naive_seq, print_result=True, extra_str=' ')
utils.color_mutants(true_naive_seq[bounds[0] : bounds[1]], inferred_naive_seq[bounds[0] : bounds[1]], print_result=True, extra_str=' ' + bounds[0]*' ')
true_naive_seq = true_naive_seq[bounds[0] : bounds[1]]
inferred_naive_seq = inferred_naive_seq[bounds[0] : bounds[1]]
if len(true_naive_seq) != len(inferred_naive_seq):
raise Exception('still not the same lengths for %s\n %s\n %s' % (query_name, true_naive_seq, inferred_naive_seq))
fraction, len_excluding_ambig = utils.hamming_fraction(true_naive_seq, inferred_naive_seq, return_len_excluding_ambig=True)
total_distance = int(fraction * len_excluding_ambig)
if len(true_naive_seq) == 0:
print 'WARNING zero length sequence in hamming_distance_to_true_naive'
return 0
if normalize:
return int(100 * (float(total_distance) / len(true_naive_seq)))
else:
return total_distance
