def check_vol(vol_params):
"""
Check volume information.
"""
pv = libvirt_storage.PoolVolume(pool_name)
# Supported operation
if vol_name not in pv.list_volumes():
test.fail("Volume %s doesn't exist" % vol_name)
ret = virsh.vol_dumpxml(vol_name, pool_name)
libvirt.check_exit_status(ret)
# vol-info
if not pv.volume_info(vol_name):
test.fail("Can't see volume info")
# vol-key
ret = virsh.vol_key(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout:
test.fail("Volume key isn't correct")
# vol-path
ret = virsh.vol_path(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout:
test.fail("Volume path isn't correct")
# vol-pool
ret = virsh.vol_pool("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if pool_name not in ret.stdout:
test.fail("Volume pool isn't correct")
# vol-name
ret = virsh.vol_name("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if vol_name not in ret.stdout:
test.fail("Volume name isn't correct")
# vol-resize
ret = virsh.vol_resize(vol_name, "2G", pool_name)
libvirt.check_exit_status(ret)
# Not supported operation
# vol-clone
ret = virsh.vol_clone(vol_name, cloned_vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-create-from
volxml = vol_xml.VolXML()
vol_params.update({"name": "%s" % create_from_cloned_volume})
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create_from(pool_name, v_xml.xml, vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-wipe
ret = virsh.vol_wipe(vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-upload
ret = virsh.vol_upload(vol_name, vm.get_first_disk_devices()['source'],
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-download
ret = virsh.vol_download(vol_name, cloned_vol_name, "--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_volume(expected_vol):
"""
Creates Volume
"""
pv = libvirt_storage.PoolVolume(expected_vol['pool_name'])
return pv.create_volume(expected_vol['name'], expected_vol['capacity'],
expected_vol['allocation'],
expected_vol['format'])
def pre_vol(self, vol_name, vol_format, capacity, allocation, pool_name):
"""
Preapare the specific type volume in pool
"""
pv = libvirt_storage.PoolVolume(pool_name)
if not pv.create_volume(vol_name, capacity, allocation, vol_format):
raise error.TestFail("Prepare volume failed.")
if not pv.volume_exists(vol_name):
raise error.TestFail("Can't find volume: %s", vol_name)
def delete_volume(expected_vol):
"""
Deletes Volume
"""
pool_name = expected_vol['pool_name']
vol_name = expected_vol['name']
pv = libvirt_storage.PoolVolume(pool_name)
if not pv.delete_volume(vol_name):
test.fail("Delete volume failed." % vol_name)
else:
logging.debug("Volume: %s successfully deleted on pool: %s",
vol_name, pool_name)
def run_test(self):
"""
Start test, Creat a volume.
"""
emulated_size = "%sG" % (int(self.volume_size[:-1]) + 1)
if int(self.volume_size[:-1]) <= 1:
raise error.TestNAError("Volume size must large than 1G")
self.pvtest = libvirt.PoolVolumeTest(self.test, self.params)
self.pvtest.pre_pool(self.pool_name,
self.pool_type,
self.pool_target,
self.emulated_img,
image_size=emulated_size,
pre_disk_vol=[self.volume_size])
self.pool = libvirt_storage.PoolVolume(self.pool_name)
self.pool.create_volume(self.vol_name, self.volume_size)
def cleanup_pool(self,
pool_name,
pool_type,
pool_target,
emulated_image,
source_name=None):
"""
Delete vols, destroy the created pool and restore the env
"""
sp = libvirt_storage.StoragePool()
try:
if sp.pool_exists(pool_name):
pv = libvirt_storage.PoolVolume(pool_name)
if pool_type in ["dir", "netfs", "logical", "disk"]:
vols = pv.list_volumes()
for vol in vols:
# Ignore failed deletion here for deleting pool
pv.delete_volume(vol)
if not sp.delete_pool(pool_name):
raise error.TestFail("Delete pool %s failed" % pool_name)
finally:
if pool_type == "netfs":
nfs_server_dir = self.params.get("nfs_server_dir",
"nfs-server")
nfs_path = os.path.join(self.tmpdir, nfs_server_dir)
setup_or_cleanup_nfs(is_setup=False, mount_dir=nfs_path)
if os.path.exists(nfs_path):
shutil.rmtree(nfs_path)
if pool_type == "logical":
cmd = "pvs |grep vg_logical|awk '{print $1}'"
pv = utils.system_output(cmd)
# Cleanup logical volume anyway
utils.run("vgremove -f vg_logical", ignore_status=True)
utils.run("pvremove %s" % pv, ignore_status=True)
# These types used iscsi device
if pool_type in ["logical", "iscsi", "fs", "disk", "scsi"]:
setup_or_cleanup_iscsi(is_setup=False,
emulated_image=emulated_image)
if pool_type in ["dir", "fs", "netfs"]:
pool_target = os.path.join(self.tmpdir, pool_target)
if os.path.exists(pool_target):
shutil.rmtree(pool_target)
if pool_type == "gluster":
setup_or_cleanup_gluster(False, source_name)
def create_vol(p_name, vol_params):
"""
Create volume.
:param p_name: Pool name.
:param vol_params: Volume parameters dict.
"""
# Clean up dirty volumes if pool has.
pv = libvirt_storage.PoolVolume(p_name)
vol_name_list = pv.list_volumes()
for vol_name in vol_name_list:
pv.delete_volume(vol_name)
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_vol(p_name, target_encrypt_params, vol_params):
"""
Create volume.
:param p_name. Pool name.
:param target_encrypt_params encrypt parameters in dict.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
# Clean up dirty volumes if pool has.
pv = libvirt_storage.PoolVolume(p_name)
vol_name_list = pv.list_volumes()
for vol_name in vol_name_list:
pv.delete_volume(vol_name)
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.encryption = volxml.new_encryption(**target_encrypt_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def run(test, params, env):
"""
Test storage pool and volumes with applications such as:
install vms, attached to vms...
"""
pool_type = params.get("pool_type")
pool_name = "test_%s_app" % pool_type
pool_target = params.get("pool_target")
emulated_img = params.get("emulated_image", "emulated-image")
volume_count = int(params.get("volume_count", 1))
volume_size = params.get("volume_size", "1G")
emulated_size = "%sG" % (volume_count * int(volume_size[:-1]) + 1)
application = params.get("application", "install")
disk_target = params.get("disk_target", "vdb")
test_message = params.get("test_message", "")
vm_name = params.get("main_vm", "avocado-vt-vm1")
block_device = params.get("block_device", "/DEV/EXAMPLE")
if application == "install":
cdrom_path = os.path.join(data_dir.get_data_dir(),
params.get("cdrom_cd1"))
if not os.path.exists(cdrom_path):
raise error.TestNAError("Can't find installation cdrom:%s"
% cdrom_path)
# Get a nonexist domain name
vm_name = "vol_install_test"
try:
pvtest = utlv.PoolVolumeTest(test, params)
pvtest.pre_pool(pool_name, pool_type, pool_target, emulated_img,
image_size=emulated_size, pre_disk_vol=[volume_size],
device_name=block_device)
logging.debug("Current pools:\n%s",
libvirt_storage.StoragePool().list_pools())
new_pool = libvirt_storage.PoolVolume(pool_name)
if pool_type == "disk":
volumes = new_pool.list_volumes()
logging.debug("Current volumes:%s", volumes)
else:
volumes = create_volumes(new_pool, volume_count, volume_size)
if application == "attach":
vm = env.get_vm(vm_name)
session = vm.wait_for_login()
virsh.attach_disk(vm_name, volumes.values()[volume_count - 1],
disk_target)
vm_attach_device = "/dev/%s" % disk_target
if session.cmd_status("which parted"):
# No parted command, check device only
if session.cmd_status("ls %s" % vm_attach_device):
raise error.TestFail("Didn't find attached device:%s"
% vm_attach_device)
return
# Test if attached disk can be used normally
utlv.mk_part(vm_attach_device, session=session)
session.cmd("mkfs.ext4 %s1" % vm_attach_device)
session.cmd("mount %s1 /mnt" % vm_attach_device)
session.cmd("echo %s > /mnt/test" % test_message)
output = session.cmd_output("cat /mnt/test").strip()
if output != test_message:
raise error.TestFail("%s cannot be used normally!"
% vm_attach_device)
elif application == "install":
# Get a nonexist domain name anyway
while virsh.domain_exists(vm_name):
vm_name += "_test"
# Prepare installation parameters
params["main_vm"] = vm_name
vm = env.create_vm("libvirt", None, vm_name, params,
test.bindir)
env.register_vm(vm_name, vm)
params["image_name"] = volumes.values()[volume_count - 1]
params["image_format"] = "raw"
params['force_create_image'] = "yes"
params['remove_image'] = "yes"
params['shutdown_cleanly'] = "yes"
params['shutdown_cleanly_timeout'] = 120
params['guest_port_unattended_install'] = 12323
params['inactivity_watcher'] = "error"
params['inactivity_treshold'] = 1800
params['image_verify_bootable'] = "no"
params['unattended_delivery_method'] = "cdrom"
params['drive_index_unattended'] = 1
params['drive_index_cd1'] = 2
params['boot_once'] = "d"
params['medium'] = "cdrom"
params['wait_no_ack'] = "yes"
params['image_raw_device'] = "yes"
params['backup_image_before_testing'] = "no"
params['kernel_params'] = ("ks=cdrom nicdelay=60 "
"console=ttyS0,115200 console=tty0")
params['cdroms'] = "unattended cd1"
params['redirs'] += " unattended_install"
selinux_mode = None
try:
selinux_mode = utils_selinux.get_status()
utils_selinux.set_status("permissive")
try:
unattended_install.run(test, params, env)
except process.CmdError, detail:
raise error.TestFail("Guest install failed:%s" % detail)
finally:
if selinux_mode is not None:
utils_selinux.set_status(selinux_mode)
env.unregister_vm(vm_name)
finally:
try:
if application == "install":
if virsh.domain_exists(vm_name):
virsh.remove_domain(vm_name)
elif application == "attach":
virsh.detach_disk(vm_name, disk_target)
finally:
pvtest.cleanup_pool(pool_name, pool_type,
pool_target, emulated_img,
device_name=block_device)
def run(test, params, env):
"""
This test cover two volume commands: vol-clone and vol-wipe.
1. Create a given type pool.
2. Create a given format volume in the pool.
3. Clone the new create volume.
4. Wipe the new clone volume.
5. Delete the volume and pool.
"""
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
if not os.path.dirname(pool_target):
pool_target = os.path.join(data_dir.get_tmp_dir(), pool_target)
emulated_image = params.get("emulated_image")
emulated_image_size = params.get("emulated_image_size")
vol_name = params.get("vol_name")
new_vol_name = params.get("new_vol_name")
vol_capability = params.get("vol_capability")
vol_allocation = params.get("vol_allocation")
vol_format = params.get("vol_format")
clone_option = params.get("clone_option", "")
wipe_algorithms = params.get("wipe_algorithms")
b_luks_encrypted = "luks" == params.get("encryption_method")
encryption_password = params.get("encryption_password", "redhat")
secret_uuids = []
wipe_old_vol = False
with_clusterSize = "yes" == params.get("with_clusterSize")
vol_clusterSize = params.get("vol_clusterSize", "64")
vol_clusterSize_unit = params.get("vol_clusterSize_unit")
libvirt_version.is_libvirt_feature_supported(params)
if virsh.has_command_help_match("vol-clone",
"--prealloc-metadata") is None:
if "prealloc-metadata" in clone_option:
test.cancel("Option --prealloc-metadata " "is not supported.")
clone_status_error = "yes" == params.get("clone_status_error", "no")
wipe_status_error = "yes" == params.get("wipe_status_error", "no")
setup_libvirt_polkit = "yes" == params.get("setup_libvirt_polkit")
# libvirt acl polkit related params
uri = params.get("virsh_uri")
unpri_user = params.get('unprivileged_user')
if unpri_user:
if unpri_user.count('EXAMPLE'):
unpri_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if setup_libvirt_polkit:
test.cancel("API acl test not supported in current"
" libvirt version.")
# Using algorithms other than zero need scrub installed.
try:
utils_path.find_command('scrub')
except utils_path.CmdNotFoundError:
logging.warning("Can't locate scrub binary, only 'zero' algorithm "
"is used.")
valid_algorithms = ["zero"]
else:
valid_algorithms = [
"zero", "nnsa", "dod", "bsi", "gutmann", "schneier", "pfitzner7",
"pfitzner33", "random"
]
# Choose an algorithm randomly
if wipe_algorithms:
alg = random.choice(wipe_algorithms.split())
else:
alg = random.choice(valid_algorithms)
libvirt_pvt = utlv.PoolVolumeTest(test, params)
libvirt_pool = libvirt_storage.StoragePool()
if libvirt_pool.pool_exists(pool_name):
test.error("Pool '%s' already exist" % pool_name)
try:
# Create a new pool
disk_vol = []
if pool_type == 'disk':
disk_vol.append(params.get("pre_vol", '10M'))
libvirt_pvt.pre_pool(pool_name=pool_name,
pool_type=pool_type,
pool_target=pool_target,
emulated_image=emulated_image,
image_size=emulated_image_size,
pre_disk_vol=disk_vol)
libvirt_vol = libvirt_storage.PoolVolume(pool_name)
# Create a new volume
if vol_format in ['raw', 'qcow2', 'qed', 'vmdk']:
if (b_luks_encrypted and vol_format in ['raw', 'qcow2']):
if not libvirt_version.version_compare(2, 0, 0):
test.cancel("LUKS is not supported in current"
" libvirt version")
if vol_format == "qcow2" and not libvirt_version.version_compare(
6, 10, 0):
test.cancel("Qcow2 format with luks encryption is not"
" supported in current libvirt version")
luks_sec_uuid = create_luks_secret(
os.path.join(pool_target, vol_name), encryption_password,
test)
secret_uuids.append(luks_sec_uuid)
vol_arg = {}
vol_arg['name'] = vol_name
vol_arg['capacity'] = int(vol_capability)
vol_arg['allocation'] = int(vol_allocation)
vol_arg['format'] = vol_format
if with_clusterSize:
vol_arg['clusterSize'] = int(vol_clusterSize)
vol_arg['clusterSize_unit'] = vol_clusterSize_unit
create_luks_vol(pool_name, vol_name, luks_sec_uuid, vol_arg)
else:
libvirt_pvt.pre_vol(vol_name=vol_name,
vol_format=vol_format,
capacity=vol_capability,
allocation=None,
pool_name=pool_name)
elif vol_format == 'partition':
vol_name = list(utlv.get_vol_list(pool_name).keys())[0]
logging.debug("Find partition %s in disk pool", vol_name)
elif vol_format == 'sparse':
# Create a sparse file in pool
sparse_file = pool_target + '/' + vol_name
cmd = "dd if=/dev/zero of=" + sparse_file
cmd += " bs=1 count=0 seek=" + vol_capability
process.run(cmd, ignore_status=True, shell=True)
else:
test.error("Unknown volume format %s" % vol_format)
# Refresh the pool
virsh.pool_refresh(pool_name, debug=True)
vol_info = libvirt_vol.volume_info(vol_name)
if not vol_info:
test.error("Fail to get info of volume %s" % vol_name)
for key in vol_info:
logging.debug("Original volume info: %s = %s", key, vol_info[key])
# Metadata preallocation is not support for block volume
if vol_info["Type"] == "block" and clone_option.count(
"prealloc-metadata"):
clone_status_error = True
if b_luks_encrypted:
wipe_old_vol = True
if pool_type == "disk":
new_vol_name = utlv.new_disk_vol_name(pool_name)
if new_vol_name is None:
test.error("Fail to generate volume name")
# update polkit rule as the volume name changed
if setup_libvirt_polkit:
vol_pat = r"lookup\('vol_name'\) == ('\S+')"
new_value = "lookup('vol_name') == '%s'" % new_vol_name
utlv.update_polkit_rule(params, vol_pat, new_value)
bad_cloned_vol_name = params.get("bad_cloned_vol_name", "")
if bad_cloned_vol_name:
new_vol_name = bad_cloned_vol_name
# Clone volume
clone_result = virsh.vol_clone(vol_name,
new_vol_name,
pool_name,
clone_option,
debug=True)
if not clone_status_error:
if clone_result.exit_status != 0:
test.fail("Clone volume fail:\n%s" %
clone_result.stderr.strip())
else:
vol_info = libvirt_vol.volume_info(new_vol_name)
for key in vol_info:
logging.debug("Cloned volume info: %s = %s", key,
vol_info[key])
logging.debug("Clone volume successfully.")
# Wipe the new clone volume
if alg:
logging.debug("Wiping volume by '%s' algorithm", alg)
wipe_result = virsh.vol_wipe(new_vol_name,
pool_name,
alg,
unprivileged_user=unpri_user,
uri=uri,
debug=True)
unsupported_err = [
"Unsupported algorithm", "no such pattern sequence"
]
if not wipe_status_error:
if wipe_result.exit_status != 0:
if any(err in wipe_result.stderr
for err in unsupported_err):
test.cancel(wipe_result.stderr)
test.fail("Wipe volume fail:\n%s" %
clone_result.stdout.strip())
else:
virsh_vol_info = libvirt_vol.volume_info(new_vol_name)
for key in virsh_vol_info:
logging.debug("Wiped volume info(virsh): %s = %s",
key, virsh_vol_info[key])
vol_path = virsh.vol_path(new_vol_name,
pool_name).stdout.strip()
qemu_vol_info = utils_misc.get_image_info(vol_path)
for key in qemu_vol_info:
logging.debug("Wiped volume info(qemu): %s = %s",
key, qemu_vol_info[key])
if qemu_vol_info['format'] != 'raw':
test.fail("Expect wiped volume "
"format is raw")
elif wipe_status_error and wipe_result.exit_status == 0:
test.fail("Expect wipe volume fail, but run"
" successfully.")
elif clone_status_error and clone_result.exit_status == 0:
test.fail("Expect clone volume fail, but run" " successfully.")
if wipe_old_vol:
# Wipe the old volume
if alg:
logging.debug("Wiping volume by '%s' algorithm", alg)
wipe_result = virsh.vol_wipe(vol_name,
pool_name,
alg,
unprivileged_user=unpri_user,
uri=uri,
debug=True)
unsupported_err = [
"Unsupported algorithm", "no such pattern sequence"
]
if not wipe_status_error:
if wipe_result.exit_status != 0:
if any(err in wipe_result.stderr
for err in unsupported_err):
test.cancel(wipe_result.stderr)
test.fail("Wipe volume fail:\n%s" %
clone_result.stdout.strip())
else:
virsh_vol_info = libvirt_vol.volume_info(vol_name)
for key in virsh_vol_info:
logging.debug("Wiped volume info(virsh): %s = %s", key,
virsh_vol_info[key])
vol_path = virsh.vol_path(vol_name,
pool_name).stdout.strip()
qemu_vol_info = utils_misc.get_image_info(vol_path)
for key in qemu_vol_info:
logging.debug("Wiped volume info(qemu): %s = %s", key,
qemu_vol_info[key])
if qemu_vol_info['format'] != 'raw':
test.fail("Expect wiped volume " "format is raw")
elif wipe_status_error and wipe_result.exit_status == 0:
test.fail("Expect wipe volume fail, but run" " successfully.")
if bad_cloned_vol_name:
pattern = "volume name '%s' cannot contain '/'" % new_vol_name
if re.search(pattern, clone_result.stderr) is None:
test.fail("vol-clone failed with unexpected reason")
finally:
# Clean up
try:
libvirt_pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
for secret_uuid in set(secret_uuids):
virsh.secret_undefine(secret_uuid)
except exceptions.TestFail as detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh undefine command.
Undefine an inactive domain, or convert persistent to transient.
1.Prepare test environment.
2.Backup the VM's information to a xml file.
3.When the libvirtd == "off", stop the libvirtd service.
4.Perform virsh undefine operation.
5.Recover test environment.(libvirts service,VM)
6.Confirm the test result.
"""
vm_ref = params.get("undefine_vm_ref", "vm_name")
extra = params.get("undefine_extra", "")
option = params.get("undefine_option", "")
libvirtd_state = params.get("libvirtd", "on")
status_error = ("yes" == params.get("status_error", "no"))
undefine_twice = ("yes" == params.get("undefine_twice", 'no'))
local_ip = params.get("local_ip", "LOCAL.EXAMPLE.COM")
remote_ip = params.get("remote_ip", "REMOTE.EXAMPLE.COM")
remote_user = params.get("remote_user", "user")
remote_pwd = params.get("remote_pwd", "password")
remote_prompt = params.get("remote_prompt", "#")
pool_type = params.get("pool_type")
pool_name = params.get("pool_name", "test")
pool_target = params.get("pool_target")
volume_size = params.get("volume_size", "1G")
vol_name = params.get("vol_name", "test_vol")
emulated_img = params.get("emulated_img", "emulated_img")
emulated_size = "%sG" % (int(volume_size[:-1]) + 1)
disk_target = params.get("disk_target", "vdb")
wipe_data = "yes" == params.get("wipe_data", "no")
if wipe_data:
option += " --wipe-storage"
vm_name = params.get("main_vm", "virt-tests-vm1")
vm = env.get_vm(vm_name)
vm_id = vm.get_id()
vm_uuid = vm.get_uuid()
# polkit acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
# Back up xml file.Xen host has no guest xml file to define a guset.
backup_xml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Confirm how to reference a VM.
if vm_ref == "vm_name":
vm_ref = vm_name
elif vm_ref == "id":
vm_ref = vm_id
elif vm_ref == "hex_vm_id":
vm_ref = hex(int(vm_id))
elif vm_ref == "uuid":
vm_ref = vm_uuid
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
volume = None
pvtest = None
status3 = None
try:
save_file = "/var/lib/libvirt/qemu/save/%s.save" % vm_name
if option.count("managedsave") and vm.is_alive():
virsh.managedsave(vm_name)
if not vm.is_lxc():
snp_list = virsh.snapshot_list(vm_name)
if option.count("snapshot"):
snp_file_list = []
if not len(snp_list):
virsh.snapshot_create(vm_name)
logging.debug("Create a snapshot for test!")
else:
# Backup snapshots for domain
for snp_item in snp_list:
tmp_file = os.path.join(test.tmpdir, snp_item + ".xml")
virsh.snapshot_dumpxml(vm_name, snp_item, to_file=tmp_file)
snp_file_list.append(tmp_file)
else:
if len(snp_list):
raise error.TestNAError("This domain has snapshot(s), "
"cannot be undefined!")
if option.count("remove-all-storage"):
pvtest = utlv.PoolVolumeTest(test, params)
pvtest.pre_pool(pool_name, pool_type, pool_target, emulated_img,
emulated_size=emulated_size)
new_pool = libvirt_storage.PoolVolume(pool_name)
if not new_pool.create_volume(vol_name, volume_size):
raise error.TestFail("Creation of volume %s failed." % vol_name)
volumes = new_pool.list_volumes()
volume = volumes[vol_name]
virsh.attach_disk(vm_name, volume, disk_target, "--config")
# Turn libvirtd into certain state.
if libvirtd_state == "off":
utils_libvirtd.libvirtd_stop()
# Test virsh undefine command.
output = ""
if vm_ref != "remote":
vm_ref = "%s %s" % (vm_ref, extra)
cmdresult = virsh.undefine(vm_ref, option,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True, debug=True)
status = cmdresult.exit_status
output = cmdresult.stdout.strip()
if status:
logging.debug("Error status, command output: %s",
cmdresult.stderr.strip())
if undefine_twice:
status2 = virsh.undefine(vm_ref,
ignore_status=True).exit_status
else:
if remote_ip.count("EXAMPLE.COM") or local_ip.count("EXAMPLE.COM"):
raise error.TestNAError("remote_ip and/or local_ip parameters"
" not changed from default values")
try:
uri = libvirt_vm.complete_uri(local_ip)
session = remote.remote_login("ssh", remote_ip, "22",
remote_user, remote_pwd,
remote_prompt)
cmd_undefine = "virsh -c %s undefine %s" % (uri, vm_name)
status, output = session.cmd_status_output(cmd_undefine)
logging.info("Undefine output: %s", output)
except (error.CmdError, remote.LoginError, aexpect.ShellError), de:
logging.error("Detail: %s", de)
status = 1
# Recover libvirtd state.
if libvirtd_state == "off":
utils_libvirtd.libvirtd_start()
# Shutdown VM.
if virsh.domain_exists(vm.name):
try:
if vm.is_alive():
vm.destroy(gracefully=False)
except error.CmdError, detail:
logging.error("Detail: %s", detail)
def run(test, params, env):
"""
Test command: virsh vol-resize
Resize the capacity of the given volume (default bytes).
1. Define and start a given type pool.
2. Create a volume in the pool.
3. Do vol-resize.
4. Check the volume info.
5. Delete the volume and pool.
TODO:
Add volume shrink test after libvirt uptream support it.
"""
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image")
emulated_image_size = params.get("emulated_image_size")
vol_name = params.get("vol_name")
vol_format = params.get("vol_format")
vol_capacity = params.get("vol_capacity")
vol_new_capacity = params.get("vol_new_capacity")
resize_option = params.get("resize_option", "")
check_vol_size = "yes" == params.get("check_vol_size", "yes")
status_error = "yes" == params.get("status_error", "no")
# libvirt acl polkit related params
uri = params.get("virsh_uri")
unpri_user = params.get('unprivileged_user')
if unpri_user:
if unpri_user.count('EXAMPLE'):
unpri_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current" +
" libvirt version.")
libv_pvt = libvirt.PoolVolumeTest(test, params)
try:
libv_pool = libvirt_storage.StoragePool()
pool_rename_times = 0
# Rename pool if given name pool exist, the max rename times is 5
while libv_pool.pool_exists(pool_name) and pool_rename_times < 5:
logging.debug("Pool '%s' already exist.", pool_name)
pool_name = pool_name + "_t"
logging.debug("Using a new name '%s' to define pool.", pool_name)
pool_rename_times += 1
else:
# Create a new pool
libv_pvt.pre_pool(pool_name, pool_type, pool_target,
emulated_image, emulated_image_size)
pool_info = libv_pool.pool_info(pool_name)
for key in pool_info:
logging.debug("Pool info: %s = %s", key, pool_info[key])
# Deal with vol_new_capacity, '--capacity' only accpet integer
if vol_new_capacity == "pool_available":
pool_avai = pool_info["Available"].split()
vol_new_capacity = pool_avai[0].split('.')[0] + pool_avai[1]
if vol_new_capacity == "pool_capacity":
pool_capa = pool_info["Capacity"].split()
vol_new_capacity = pool_capa[0].split('.')[0] + pool_capa[1]
# Create a volume
libv_pvt.pre_vol(vol_name=vol_name,
vol_format=vol_format,
capacity=vol_capacity,
allocation=None,
pool_name=pool_name)
libv_vol = libvirt_storage.PoolVolume(pool_name)
check_vol_info(libv_vol, vol_name)
# The volume size may not accurate as we expect after resize, such as:
# 1) vol_new_capacity = 1b with --delta option, the volume size will not
# change; run
# 2) vol_new_capacity = 1KB with --delta option, the volume size will
# increase 1024 not 1000
# So we can disable volume size check after resize
if check_vol_size:
vol_path = libv_vol.list_volumes()[vol_name]
expect_info = get_expect_info(vol_new_capacity, vol_path,
resize_option)
logging.debug("Expect volume info: %s", expect_info)
else:
expect_info = {}
# Run vol-resize
result = virsh.vol_resize(vol_name,
vol_new_capacity,
pool_name,
resize_option,
uri=uri,
unprivileged_user=unpri_user,
debug=True)
if not status_error:
if result.exit_status != 0:
raise error.TestFail(result.stdout.strip())
else:
if check_vol_info(libv_vol, vol_name, expect_info):
logging.debug("Volume %s resize check pass.", vol_name)
else:
raise error.TestFail("Volume %s resize check fail." %
vol_name)
elif result.exit_status == 0:
raise error.TestFail("Expect resize fail but run successfully.")
finally:
# Clean up
try:
libv_pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
except error.TestFail, detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh snapshot command when disk in all kinds of type.
(1). Init the variables from params.
(2). Create a image by specifice format.
(3). Attach disk to vm.
(4). Snapshot create.
(5). Snapshot revert.
(6). cleanup.
"""
# Init variables.
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
vm_state = params.get("vm_state", "running")
image_format = params.get("snapshot_image_format", "qcow2")
snapshot_del_test = "yes" == params.get("snapshot_del_test", "no")
status_error = ("yes" == params.get("status_error", "no"))
snapshot_from_xml = ("yes" == params.get("snapshot_from_xml", "no"))
snapshot_current = ("yes" == params.get("snapshot_current", "no"))
snapshot_revert_paused = ("yes" == params.get("snapshot_revert_paused",
"no"))
replace_vm_disk = "yes" == params.get("replace_vm_disk", "no")
disk_source_protocol = params.get("disk_source_protocol")
vol_name = params.get("vol_name")
tmp_dir = data_dir.get_tmp_dir()
pool_name = params.get("pool_name", "gluster-pool")
brick_path = os.path.join(tmp_dir, pool_name)
multi_gluster_disks = "yes" == params.get("multi_gluster_disks", "no")
# Pool variables.
snapshot_with_pool = "yes" == params.get("snapshot_with_pool", "no")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image", "emulated-image")
vol_format = params.get("vol_format")
lazy_refcounts = "yes" == params.get("lazy_refcounts")
options = params.get("snapshot_options", "")
export_options = params.get("export_options", "rw,no_root_squash,fsid=0")
# Set volume xml attribute dictionary, extract all params start with 'vol_'
# which are for setting volume xml, except 'lazy_refcounts'.
vol_arg = {}
for key in params.keys():
if key.startswith('vol_'):
if key[4:] in ['capacity', 'allocation', 'owner', 'group']:
vol_arg[key[4:]] = int(params[key])
else:
vol_arg[key[4:]] = params[key]
vol_arg['lazy_refcounts'] = lazy_refcounts
supported_pool_list = [
"dir", "fs", "netfs", "logical", "iscsi", "disk", "gluster"
]
if snapshot_with_pool:
if pool_type not in supported_pool_list:
raise error.TestNAError("%s not in support list %s" %
(pool_target, supported_pool_list))
# Do xml backup for final recovery
vmxml_backup = libvirt_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Some variable for xmlfile of snapshot.
snapshot_memory = params.get("snapshot_memory", "internal")
snapshot_disk = params.get("snapshot_disk", "internal")
no_memory_snap = "yes" == params.get("no_memory_snap", "no")
# Skip 'qed' cases for libvirt version greater than 1.1.0
if libvirt_version.version_compare(1, 1, 0):
if vol_format == "qed" or image_format == "qed":
raise error.TestNAError("QED support changed, check bug: "
"https://bugzilla.redhat.com/show_bug.cgi"
"?id=731570")
if not libvirt_version.version_compare(1, 2, 7):
# As bug 1017289 closed as WONTFIX, the support only
# exist on 1.2.7 and higher
if disk_source_protocol == 'gluster':
raise error.TestNAError("Snapshot on glusterfs not support in "
"current version. Check more info with "
"https://bugzilla.redhat.com/buglist.cgi?"
"bug_id=1017289,1032370")
# Init snapshot_name
snapshot_name = None
snapshot_external_disk = []
snapshot_xml_path = None
del_status = None
image = None
pvt = None
# Get a tmp dir
snap_cfg_path = "/var/lib/libvirt/qemu/snapshot/%s/" % vm_name
try:
if replace_vm_disk:
utlv.set_vm_disk(vm, params, tmp_dir)
if multi_gluster_disks:
new_params = params.copy()
new_params["pool_name"] = "gluster-pool2"
new_params["vol_name"] = "gluster-vol2"
new_params["disk_target"] = "vdf"
new_params["image_convert"] = 'no'
utlv.set_vm_disk(vm, new_params, tmp_dir)
if snapshot_with_pool:
# Create dst pool for create attach vol img
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(pool_name,
pool_type,
pool_target,
emulated_image,
image_size="1G",
pre_disk_vol=["20M"],
source_name=vol_name,
export_options=export_options)
if pool_type in ["iscsi", "disk"]:
# iscsi and disk pool did not support create volume in libvirt,
# logical pool could use libvirt to create volume but volume
# format is not supported and will be 'raw' as default.
pv = libvirt_storage.PoolVolume(pool_name)
vols = pv.list_volumes().keys()
if vols:
vol_name = vols[0]
else:
raise error.TestNAError("No volume in pool: %s" %
pool_name)
else:
# Set volume xml file
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
# Run virsh_vol_create to create vol
logging.debug("create volume from xml: %s" %
newvol.xmltreefile)
cmd_result = virsh.vol_create(pool_name,
vol_xml,
ignore_status=True,
debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to create attach volume.")
cmd_result = virsh.vol_path(vol_name, pool_name, debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to get volume path from pool.")
img_path = cmd_result.stdout.strip()
if pool_type in ["logical", "iscsi", "disk"]:
# Use qemu-img to format logical, iscsi and disk block device
if vol_format != "raw":
cmd = "qemu-img create -f %s %s 10M" % (vol_format,
img_path)
cmd_result = utils.run(cmd, ignore_status=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to format volume, %s" %
cmd_result.stdout.strip())
extra = "--persistent --subdriver %s" % vol_format
else:
# Create a image.
params['image_name'] = "snapshot_test"
params['image_format'] = image_format
params['image_size'] = "1M"
image = qemu_storage.QemuImg(params, tmp_dir, "snapshot_test")
img_path, _ = image.create(params)
extra = "--persistent --subdriver %s" % image_format
if not multi_gluster_disks:
# Do the attach action.
out = utils.run("qemu-img info %s" % img_path)
logging.debug("The img info is:\n%s" % out.stdout.strip())
result = virsh.attach_disk(vm_name,
source=img_path,
target="vdf",
extra=extra,
debug=True)
if result.exit_status:
raise error.TestNAError("Failed to attach disk %s to VM."
"Detail: %s." %
(img_path, result.stderr))
# Create snapshot.
if snapshot_from_xml:
snap_xml = libvirt_xml.SnapshotXML()
snapshot_name = "snapshot_test"
snap_xml.snap_name = snapshot_name
snap_xml.description = "Snapshot Test"
if not no_memory_snap:
if "--disk-only" not in options:
if snapshot_memory == "external":
memory_external = os.path.join(tmp_dir,
"snapshot_memory")
snap_xml.mem_snap_type = snapshot_memory
snap_xml.mem_file = memory_external
snapshot_external_disk.append(memory_external)
else:
snap_xml.mem_snap_type = snapshot_memory
# Add all disks into xml file.
vmxml = libvirt_xml.VMXML.new_from_inactive_dumpxml(vm_name)
disks = vmxml.devices.by_device_tag('disk')
new_disks = []
for src_disk_xml in disks:
disk_xml = snap_xml.SnapDiskXML()
disk_xml.xmltreefile = src_disk_xml.xmltreefile
del disk_xml.device
del disk_xml.address
disk_xml.snapshot = snapshot_disk
disk_xml.disk_name = disk_xml.target['dev']
# Only qcow2 works as external snapshot file format, update it
# here
driver_attr = disk_xml.driver
driver_attr.update({'type': 'qcow2'})
disk_xml.driver = driver_attr
if snapshot_disk == 'external':
new_attrs = disk_xml.source.attrs
if disk_xml.source.attrs.has_key('file'):
new_file = "%s.snap" % disk_xml.source.attrs['file']
snapshot_external_disk.append(new_file)
new_attrs.update({'file': new_file})
hosts = None
elif disk_xml.source.attrs.has_key('name'):
new_name = "%s.snap" % disk_xml.source.attrs['name']
new_attrs.update({'name': new_name})
hosts = disk_xml.source.hosts
elif (disk_xml.source.attrs.has_key('dev')
and disk_xml.type_name == 'block'):
# Use local file as external snapshot target for block type.
# As block device will be treat as raw format by default,
# it's not fit for external disk snapshot target. A work
# around solution is use qemu-img again with the target.
disk_xml.type_name = 'file'
del new_attrs['dev']
new_file = "%s/blk_src_file.snap" % tmp_dir
snapshot_external_disk.append(new_file)
new_attrs.update({'file': new_file})
hosts = None
new_src_dict = {"attrs": new_attrs}
if hosts:
new_src_dict.update({"hosts": hosts})
disk_xml.source = disk_xml.new_disk_source(**new_src_dict)
else:
del disk_xml.source
new_disks.append(disk_xml)
snap_xml.set_disks(new_disks)
snapshot_xml_path = snap_xml.xml
logging.debug("The snapshot xml is: %s" % snap_xml.xmltreefile)
options += " --xmlfile %s " % snapshot_xml_path
if vm_state == "shut off":
vm.destroy(gracefully=False)
snapshot_result = virsh.snapshot_create(vm_name,
options,
debug=True)
out_err = snapshot_result.stderr.strip()
if snapshot_result.exit_status:
if status_error:
return
else:
if re.search(
"live disk snapshot not supported with this "
"QEMU binary", out_err):
raise error.TestNAError(out_err)
if libvirt_version.version_compare(1, 2, 5):
# As commit d2e668e in 1.2.5, internal active snapshot
# without memory state is rejected. Handle it as SKIP
# for now. This could be supportted in future by bug:
# https://bugzilla.redhat.com/show_bug.cgi?id=1103063
if re.search(
"internal snapshot of a running VM" +
" must include the memory state", out_err):
raise error.TestNAError("Check Bug #1083345, %s" %
out_err)
raise error.TestFail(
"Failed to create snapshot. Error:%s." % out_err)
else:
snapshot_result = virsh.snapshot_create(vm_name,
options,
debug=True)
if snapshot_result.exit_status:
if status_error:
return
else:
raise error.TestFail(
"Failed to create snapshot. Error:%s." %
snapshot_result.stderr.strip())
snapshot_name = re.search("\d+",
snapshot_result.stdout.strip()).group(0)
if snapshot_current:
snap_xml = libvirt_xml.SnapshotXML()
new_snap = snap_xml.new_from_snapshot_dumpxml(
vm_name, snapshot_name)
# update an element
new_snap.creation_time = snapshot_name
snapshot_xml_path = new_snap.xml
options += "--redefine %s --current" % snapshot_xml_path
snapshot_result = virsh.snapshot_create(vm_name,
options,
debug=True)
if snapshot_result.exit_status:
raise error.TestFail("Failed to create snapshot --current."
"Error:%s." %
snapshot_result.stderr.strip())
if status_error:
if not snapshot_del_test:
raise error.TestFail("Success to create snapshot in negative"
" case\nDetail: %s" % snapshot_result)
# Touch a file in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
# Init a unique name for tmp_file.
tmp_file = tempfile.NamedTemporaryFile(prefix=("snapshot_test_"),
dir="/tmp")
tmp_file_path = tmp_file.name
tmp_file.close()
echo_cmd = "echo SNAPSHOT_DISK_TEST >> %s" % tmp_file_path
status, output = session.cmd_status_output(echo_cmd)
logging.debug("The echo output in domain is: '%s'", output)
if status:
raise error.TestFail("'%s' run failed with '%s'" %
(tmp_file_path, output))
status, output = session.cmd_status_output("cat %s" % tmp_file_path)
logging.debug("File created with content: '%s'", output)
session.close()
# As only internal snapshot revert works now, let's only do revert
# with internal, and move the all skip external cases back to pass.
# After external also supported, just move the following code back.
if snapshot_disk == 'internal':
# Destroy vm for snapshot revert.
if not libvirt_version.version_compare(1, 2, 3):
virsh.destroy(vm_name)
# Revert snapshot.
revert_options = ""
if snapshot_revert_paused:
revert_options += " --paused"
revert_result = virsh.snapshot_revert(vm_name,
snapshot_name,
revert_options,
debug=True)
if revert_result.exit_status:
# Attempts to revert external snapshots will FAIL with an error
# "revert to external disk snapshot not supported yet" or "revert
# to external snapshot not supported yet" since d410e6f. Thus,
# let's check for that and handle as a SKIP for now. Check bug:
# https://bugzilla.redhat.com/show_bug.cgi?id=1071264
if re.search(
"revert to external \w* ?snapshot not supported yet",
revert_result.stderr):
raise error.TestNAError(revert_result.stderr.strip())
else:
raise error.TestFail("Revert snapshot failed. %s" %
revert_result.stderr.strip())
if vm.is_dead():
raise error.TestFail("Revert snapshot failed.")
if snapshot_revert_paused:
if vm.is_paused():
vm.resume()
else:
raise error.TestFail(
"Revert command successed, but VM is not "
"paused after reverting with --paused"
" option.")
# login vm.
session = vm.wait_for_login()
# Check the result of revert.
status, output = session.cmd_status_output("cat %s" %
tmp_file_path)
logging.debug("After revert cat file output='%s'", output)
if not status:
raise error.TestFail("Tmp file exists, revert failed.")
# Close the session.
session.close()
# Test delete snapshot without "--metadata", delete external disk
# snapshot will fail for now.
# Only do this when snapshot creat succeed which filtered in cfg file.
if snapshot_del_test:
if snapshot_name:
del_result = virsh.snapshot_delete(vm_name,
snapshot_name,
debug=True,
ignore_status=True)
del_status = del_result.exit_status
snap_xml_path = snap_cfg_path + "%s.xml" % snapshot_name
if del_status:
if not status_error:
raise error.TestFail("Failed to delete snapshot.")
else:
if not os.path.exists(snap_xml_path):
raise error.TestFail(
"Snapshot xml file %s missing" % snap_xml_path)
else:
if status_error:
err_msg = "Snapshot delete succeed but expect fail."
raise error.TestFail(err_msg)
else:
if os.path.exists(snap_xml_path):
raise error.TestFail("Snapshot xml file %s still" %
snap_xml_path + " exist")
finally:
if vm.is_alive():
vm.destroy(gracefully=False)
virsh.detach_disk(vm_name, target="vdf", extra="--persistent")
if image:
image.remove()
if del_status and snapshot_name:
virsh.snapshot_delete(vm_name, snapshot_name, "--metadata")
for disk in snapshot_external_disk:
if os.path.exists(disk):
os.remove(disk)
vmxml_backup.sync("--snapshots-metadata")
libvirtd = utils_libvirtd.Libvirtd()
if disk_source_protocol == 'gluster':
utlv.setup_or_cleanup_gluster(False, vol_name, brick_path)
if multi_gluster_disks:
brick_path = os.path.join(tmp_dir, "gluster-pool2")
utlv.setup_or_cleanup_gluster(False, "gluster-vol2",
brick_path)
libvirtd.restart()
if snapshot_xml_path:
if os.path.exists(snapshot_xml_path):
os.unlink(snapshot_xml_path)
if pvt:
try:
pvt.cleanup_pool(pool_name,
pool_type,
pool_target,
emulated_image,
source_name=vol_name)
except error.TestFail, detail:
libvirtd.restart()
logging.error(str(detail))
def run(test, params, env):
"""
Test svirt in adding disk to VM.
(1).Init variables for test.
(2).Create a image to attached to VM.
(3).Attach disk.
(4).Start VM and check result.
"""
# Get general variables.
status_error = ('yes' == params.get("status_error", 'no'))
host_sestatus = params.get("svirt_attach_disk_host_selinux", "enforcing")
# Get variables about seclabel for VM.
sec_type = params.get("svirt_attach_disk_vm_sec_type", "dynamic")
sec_model = params.get("svirt_attach_disk_vm_sec_model", "selinux")
sec_label = params.get("svirt_attach_disk_vm_sec_label", None)
sec_relabel = params.get("svirt_attach_disk_vm_sec_relabel", "yes")
sec_dict = {'type': sec_type, 'model': sec_model, 'label': sec_label,
'relabel': sec_relabel}
# Get variables about pool vol
with_pool_vol = 'yes' == params.get("with_pool_vol", "no")
check_cap_rawio = "yes" == params.get("check_cap_rawio", "no")
virt_use_nfs = params.get("virt_use_nfs", "off")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image")
vol_name = params.get("vol_name")
vol_format = params.get("vol_format")
# Get variables about VM and get a VM object and VMXML instance.
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
vmxml = VMXML.new_from_inactive_dumpxml(vm_name)
backup_xml = vmxml.copy()
# Get varialbles about image.
img_label = params.get('svirt_attach_disk_disk_label')
img_name = "svirt_disk"
# Default label for the other disks.
# To ensure VM is able to access other disks.
default_label = params.get('svirt_attach_disk_disk_default_label', None)
# Set selinux of host.
backup_sestatus = utils_selinux.get_status()
utils_selinux.set_status(host_sestatus)
# Set the default label to other disks of vm.
disks = vm.get_disk_devices()
for disk in disks.values():
utils_selinux.set_context_of_file(filename=disk['source'],
context=default_label)
pvt = None
qemu_conf = utils_config.LibvirtQemuConfig()
libvirtd = utils_libvirtd.Libvirtd()
try:
# set qemu conf
if check_cap_rawio:
qemu_conf.user = '******'
qemu_conf.group = 'root'
logging.debug("the qemu.conf content is: %s" % qemu_conf)
libvirtd.restart()
# Set the context of the VM.
vmxml.set_seclabel([sec_dict])
vmxml.sync()
logging.debug("the domain xml is: %s" % vmxml.xmltreefile)
if with_pool_vol:
# Create dst pool for create attach vol img
pvt = utlv.PoolVolumeTest(test, params)
logging.debug("pool_type %s" % pool_type)
pvt.pre_pool(pool_name, pool_type, pool_target,
emulated_image, image_size="1G",
pre_disk_vol=["20M"])
if pool_type in ["iscsi", "disk"]:
# iscsi and disk pool did not support create volume in libvirt,
# logical pool could use libvirt to create volume but volume
# format is not supported and will be 'raw' as default.
pv = libvirt_storage.PoolVolume(pool_name)
vols = pv.list_volumes().keys()
if vols:
vol_name = vols[0]
else:
raise error.TestNAError("No volume in pool: %s" % pool_name)
else:
vol_arg = {'name': vol_name, 'format': vol_format,
'capacity': 1073741824,
'allocation': 1048576, }
# Set volume xml file
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
# Run virsh_vol_create to create vol
logging.debug("create volume from xml: %s" % newvol.xmltreefile)
cmd_result = virsh.vol_create(pool_name, vol_xml,
ignore_status=True,
debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to create attach volume.")
cmd_result = virsh.vol_path(vol_name, pool_name, debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to get volume path from pool.")
img_path = cmd_result.stdout.strip()
if pool_type in ["iscsi", "disk"]:
extra = "--driver qemu --type lun --rawio --persistent"
else:
extra = "--persistent --subdriver qcow2"
# set host_sestatus as nfs pool will reset it
utils_selinux.set_status(host_sestatus)
# set virt_use_nfs
result = utils.run("setsebool virt_use_nfs %s" % virt_use_nfs)
if result.exit_status:
raise error.TestNAError("Failed to set virt_use_nfs value")
else:
# Init a QemuImg instance.
params['image_name'] = img_name
tmp_dir = data_dir.get_tmp_dir()
image = qemu_storage.QemuImg(params, tmp_dir, img_name)
# Create a image.
img_path, result = image.create(params)
# Set the context of the image.
utils_selinux.set_context_of_file(filename=img_path, context=img_label)
extra = "--persistent"
# Do the attach action.
result = virsh.attach_disk(vm_name, source=img_path, target="vdf",
extra=extra, debug=True)
if result.exit_status:
raise error.TestFail("Failed to attach disk %s to VM."
"Detail: %s." % (img_path, result.stderr))
# Start VM to check the VM is able to access the image or not.
try:
vm.start()
# Start VM successfully.
# VM with set seclabel can access the image with the
# set context.
if status_error:
raise error.TestFail('Test succeeded in negative case.')
if check_cap_rawio:
cap_list = ['CapPrm', 'CapEff', 'CapBnd']
cap_dict = {}
pid = vm.get_pid()
pid_status_path = "/proc/%s/status" % pid
with open(pid_status_path) as f:
for line in f:
val_list = line.split(":")
if val_list[0] in cap_list:
cap_dict[val_list[0]] = int(val_list[1].strip(), 16)
# bit and with rawio capabilitiy value to check cap_sys_rawio
# is set
cap_rawio_val = 0x0000000000020000
for i in cap_list:
if not cap_rawio_val & cap_dict[i]:
err_msg = "vm process with %s: 0x%x" % (i, cap_dict[i])
err_msg += " lack cap_sys_rawio capabilities"
raise error.TestFail(err_msg)
else:
inf_msg = "vm process with %s: 0x%x" % (i, cap_dict[i])
inf_msg += " have cap_sys_rawio capabilities"
logging.debug(inf_msg)
except virt_vm.VMStartError, e:
# Starting VM failed.
# VM with set seclabel can not access the image with the
# set context.
if not status_error:
raise error.TestFail("Test failed in positive case."
"error: %s" % e)
try:
virsh.detach_disk(vm_name, target="vdf", extra="--persistent",
debug=True)
except error.CmdError:
raise error.TestFail("Detach disk 'vdf' from VM %s failed."
% vm.name)
def run(test, params, env):
"""
Test simultaneous volume operations
1. Create a pool and a volume
2. Create n number of volumes simultaneously whose source volume is
the same
3. Run virsh.vol_xxx before step2 volume is creating
vol-create
vol-clone
vol-download
vol-upload
vol-delete
vol-wipe
vol-resize
4. Check if success or error throw as expected
"""
src_pool_name = params.get("pool_name")
pool_type = params.get("pool_type", "dir")
pool_target = params.get("pool_target")
pool_target = os.path.join(data_dir.get_tmp_dir(), pool_target)
vol_format = params.get("volume_format")
vol_size = params.get("volume_size", "262144")
volume_count = int(params.get("volume_number"))
new_capacity = params.get("new_capacity")
emulated_image = params.get("emulated_image", "emulated-image")
emulated_image_size = params.get("emulated_image_size")
status_error = ("yes" == params.get("status_error", "no"))
file_to_clean = []
updown_load_f = params.get("to_file")
if updown_load_f:
updown_load_f = os.path.join(data_dir.get_tmp_dir(), updown_load_f)
file_to_clean.append(updown_load_f)
if os.path.basename(updown_load_f) == "upload_file":
open(updown_load_f, "w").close()
pvt = utlv.PoolVolumeTest(test, params)
try:
# Create the src pool
pvt.pre_pool(src_pool_name,
pool_type,
pool_target,
emulated_image,
image_size=emulated_image_size)
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create the src vol
src_vol_name = params.get("volume_name")
pv = libvirt_storage.PoolVolume(src_pool_name)
pv.create_volume(src_vol_name, vol_size, None, vol_format)
# Create n number of volumes simultaneously
threads = []
new_vol_list = []
for count in range(1, volume_count + 1):
new_vol_name = "new_vol%s" % count
vol_file = prepare_vol_xml(new_vol_name, vol_size, vol_format)
file_to_clean.append(vol_file)
new_vol_list.append(new_vol_name)
# Run virsh_vol_create_from in parallel
create_t = threading.Thread(target=worker,
args=(virsh.vol_create_from, False,
src_pool_name, vol_file,
src_vol_name, src_pool_name))
threads.append(create_t)
# Run virsh.vol_xxx when volume is creating
vol_status = params.get("vol_status")
operate_vol = ""
if vol_status == "reading":
operate_vol = src_vol_name
elif vol_status == "writing":
operate_vol = "new_vol%s" % volume_count
vol_operation = params.get("vol_operation")
operation_t = ""
if vol_operation == "create":
vol_file = prepare_vol_xml("vol-create", vol_size, vol_format)
file_to_clean.append(vol_file)
operation_t = threading.Thread(target=worker,
args=(virsh.vol_create_from, True,
src_pool_name, vol_file,
operate_vol, src_pool_name))
elif vol_operation == "delete":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_delete, True,
operate_vol, src_pool_name))
elif vol_operation == "wipe":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_wipe, True,
operate_vol, src_pool_name))
elif vol_operation == "resize":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_resize, True,
operate_vol, new_capacity,
src_pool_name))
elif vol_operation == "clone":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_clone, True,
operate_vol, "vol-clone",
src_pool_name))
elif vol_operation == "upload":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_upload, True,
operate_vol, updown_load_f,
src_pool_name))
elif vol_operation == "download":
operation_t = threading.Thread(target=worker,
args=(virsh.vol_download, True,
operate_vol, updown_load_f,
src_pool_name))
is_started = False
for t in threads:
t.start()
while threading.active_count() > 1:
if pv.volume_exists(operate_vol):
operation_t.start()
is_started = True
break
if not is_started:
test.cancel("The creation of volume completed already")
for t in threads:
t.join()
operation_t.join()
# Print current volumes for debugging
logging.debug("Current volumes:%s", pv.list_volumes())
# Check volume creation
for vol_name in new_vol_list:
if vol_name not in pv.list_volumes():
test.fail("Failed to create volume %s" % vol_name)
# Check each thread running result
result_list = []
while not q.empty():
result_list.append(q.get())
for item in result_list:
if vol_operation in item[1].__name__:
if not status_error and item[0].exit_status:
test.fail("%s failed:\n%s" % (item[1], item[0].stderr))
elif status_error and not item[0].exit_status:
test.fail("%s expect to fail but succeed:\n%s" %
(item[1], item[0].stdout))
check_cmd_output(item[0], status_error, test)
finally:
# Cleanup: both src and dest should be removed
try:
pvt.cleanup_pool(src_pool_name, pool_type, pool_target,
emulated_image)
except exceptions.TestFail as detail:
logging.error(str(detail))
logging.debug("clean file: %s", str(file_to_clean))
for file in file_to_clean:
if os.path.exists(file):
os.remove(file)
def run(test, params, env):
"""
This test cover two volume commands: vol-clone and vol-wipe.
1. Create a given type pool.
2. Create a given format volume in the pool.
3. Clone the new create volume.
4. Wipe the new clone volume.
5. Delete the volume and pool.
"""
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
if not os.path.dirname(pool_target):
pool_target = os.path.join(test.tmpdir, pool_target)
emulated_image = params.get("emulated_image")
emulated_image_size = params.get("emulated_image_size")
vol_name = params.get("vol_name")
new_vol_name = params.get("new_vol_name")
vol_capability = params.get("vol_capability")
vol_format = params.get("vol_format")
clone_option = params.get("clone_option", "")
wipe_algorithms = params.get("wipe_algorithms")
if virsh.has_command_help_match("vol-wipe", "--prealloc-metadata") is None:
if "prealloc-metadata" in clone_option:
raise error.TestNAError("Option --prealloc-metadata "
"is not supported.")
# Using algorithms other than zero need scrub installed.
try:
utils_misc.find_command('scrub')
except ValueError:
logging.warning("Can't locate scrub binary, only 'zero' algorithm "
"is used.")
valid_algorithms = ["zero"]
else:
valid_algorithms = [
"zero", "nnsa", "dod", "bsi", "gutmann", "schneier", "pfitzner7",
"pfitzner33", "random"
]
# Choose an algorithms randomly
if wipe_algorithms:
alg = random.choice(wipe_algorithms.split())
else:
alg = random.choice(valid_algorithms)
clone_status_error = "yes" == params.get("clone_status_error", "no")
wipe_status_error = "yes" == params.get("wipe_status_error", "no")
# libvirt acl polkit related params
uri = params.get("virsh_uri")
unpri_user = params.get('unprivileged_user')
if unpri_user:
if unpri_user.count('EXAMPLE'):
unpri_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current" +
" libvirt version.")
libv_pvt = libvirt.PoolVolumeTest(test, params)
try:
libv_pool = libvirt_storage.StoragePool()
pool_rename_times = 0
# Rename pool if given name pool exist, the max rename times is 5
while libv_pool.pool_exists(pool_name) and pool_rename_times < 5:
logging.debug("Pool '%s' already exist.", pool_name)
pool_name = pool_name + "_t"
logging.debug("Using a new name '%s' to define pool.", pool_name)
pool_rename_times += 1
else:
# Create a new pool
libv_pvt.pre_pool(pool_name, pool_type, pool_target,
emulated_image, emulated_image_size)
# Create a new volume
libv_pvt.pre_vol(vol_name=vol_name,
vol_format=vol_format,
capacity=vol_capability,
allocation=None,
pool_name=pool_name)
libv_vol = libvirt_storage.PoolVolume(pool_name)
vol_info = libv_vol.volume_info(vol_name)
for key in vol_info:
logging.debug("Original volume info: %s = %s", key, vol_info[key])
# Metadata preallocation is not support for block volume
if vol_info["Type"] == "block" and clone_option.count(
"prealloc-metadata"):
clone_status_error = True
# Clone volume
clone_result = virsh.vol_clone(vol_name,
new_vol_name,
pool_name,
clone_option,
debug=True)
if not clone_status_error:
if clone_result.exit_status != 0:
raise error.TestFail("Clone volume fail:\n%s" %
clone_result.stdout.strip())
else:
vol_info = libv_vol.volume_info(new_vol_name)
for key in vol_info:
logging.debug("Cloned volume info: %s = %s", key,
vol_info[key])
logging.debug("Clone volume successfully.")
# Wipe the new clone volume
if alg:
logging.debug("Wiping volume by '%s' algorithm", alg)
wipe_result = virsh.vol_wipe(new_vol_name,
pool_name,
alg,
unprivileged_user=unpri_user,
uri=uri,
debug=True)
if not wipe_status_error:
if wipe_result.exit_status != 0:
raise error.TestFail("Wipe volume fail:\n%s" %
clone_result.stdout.strip())
else:
vol_info = libv_vol.volume_info(new_vol_name)
for key in vol_info:
logging.debug("Wiped volume info: %s = %s", key,
vol_info[key])
logging.debug("Wipe volume successfully.")
elif wipe_status_error and wipe_result.exit_status == 0:
raise error.TestFail("Expect wipe volume fail, but run"
" successfully.")
elif clone_status_error and clone_result.exit_status == 0:
raise error.TestFail("Expect clone volume fail, but run"
" successfully.")
finally:
# Clean up
try:
libv_pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
except error.TestFail, detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh vol-create command to cover the following matrix:
pool_type = [dir, fs, netfs]
volume_format = [raw, bochs, cloop, cow, dmg, iso, qcow, qcow2, qed,
vmdk, vpc]
pool_type = [disk]
volume_format = [none, linux, fat16, fat32, linux-swap, linux-lvm,
linux-raid, extended]
pool_type = [logical]
volume_format = [none]
pool_type = [iscsi, scsi]
Not supported with format type
TODO:
pool_type = [rbd, glusterfs]
Reference: http://www.libvirt.org/storage.html
"""
src_pool_type = params.get("src_pool_type")
src_pool_target = params.get("src_pool_target")
src_pool_format = params.get("src_pool_format", "")
pool_vol_num = int(params.get("src_pool_vol_num", '1'))
src_emulated_image = params.get("src_emulated_image")
extra_option = params.get("extra_option", "")
prefix_vol_name = params.get("vol_name", "vol_create_test")
vol_format = params.get("vol_format", "raw")
vol_capacity = params.get("vol_capacity", 1048576)
vol_allocation = params.get("vol_allocation", 1048576)
image_size = params.get("emulate_image_size", "1G")
lazy_refcounts = "yes" == params.get("lazy_refcounts")
status_error = "yes" == params.get("status_error", "no")
by_xml = "yes" == params.get("create_vol_by_xml", "yes")
incomplete_target = "yes" == params.get("incomplete_target", "no")
if not libvirt_version.version_compare(1, 0, 0):
if "--prealloc-metadata" in extra_option:
raise error.TestNAError("metadata preallocation not supported in"
" current libvirt version.")
if incomplete_target:
raise error.TestNAError("It does not support generate target "
"path in thi libvirt version.")
pool_type = ['dir', 'disk', 'fs', 'logical', 'netfs', 'iscsi', 'scsi']
if src_pool_type not in pool_type:
raise error.TestNAError("pool type %s not in supported type list: %s" %
(src_pool_type, pool_type))
# libvirt acl polkit related params
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Set volume xml attribute dictionary, extract all params start with 'vol_'
# which are for setting volume xml, except 'lazy_refcounts'.
vol_arg = {}
for key in params.keys():
if key.startswith('vol_'):
if key[4:] in ['capacity', 'allocation', 'owner', 'group']:
vol_arg[key[4:]] = int(params[key])
else:
vol_arg[key[4:]] = params[key]
vol_arg['lazy_refcounts'] = lazy_refcounts
def post_process_vol(ori_vol_path):
"""
Create or disactive a volume without libvirt
:param ori_vol_path: Full path of an original volume
:retur: Volume name for checking
"""
process_vol_name = params.get("process_vol_name", "process_vol")
process_vol_options = params.get("process_vol_options", "")
process_vol_capacity = params.get("process_vol_capacity", vol_capacity)
process_vol_cmd = ""
unsupport_err = "Unsupport do '%s %s' in this test" % (
process_vol_by, process_vol_type)
if process_vol_by == "lvcreate":
process_vol_cmd = "lvcreate -L %s " % process_vol_capacity
if process_vol_type == "thin":
if not process_vol_options:
process_vol_options = "-T "
process_vol_cmd += "%s " % process_vol_options
processthin_pool_name = params.get("processthin_pool_name",
"thinpool")
processthin_vol_name = params.get("processthin_vol_name",
"thinvol")
process_vol_capacity = params.get("process_vol_capacity", "1G")
os.path.dirname(ori_vol_path)
process_vol_cmd += "%s/%s " % (os.path.dirname(ori_vol_path),
processthin_pool_name)
process_vol_cmd += "-V %s " % process_vol_capacity
process_vol_cmd += "-n %s " % processthin_vol_name
process_vol_name = processthin_vol_name
elif process_vol_type == "snapshot":
if not process_vol_options:
process_vol_options = "-s "
process_vol_cmd += "%s " % process_vol_options
process_vol_cmd += "-n %s " % process_vol_name
process_vol_cmd += "%s " % (ori_vol_path)
else:
logging.error(unsupport_err)
return
elif process_vol_by == "qemu-img" and process_vol_type == "create":
process_vol_cmd = "qemu-img create "
process_vol_path = os.path.dirname(ori_vol_path) + "/"
process_vol_path += process_vol_name
process_vol_cmd += "%s " % process_vol_options
process_vol_cmd += "%s " % process_vol_path
process_vol_cmd += "%s " % process_vol_capacity
elif process_vol_by == "lvchange" and process_vol_type == "deactivate":
process_vol_cmd = "lvchange %s " % ori_vol_path
if not process_vol_options:
process_vol_options = "-an"
process_vol_cmd += process_vol_options
else:
logging.error(unsupport_err)
return
rst = utils.run(process_vol_cmd, ignore_status=True)
if rst.exit_status:
if "Snapshots of snapshots are not supported" in rst.stderr:
logging.debug("%s is already a snapshot volume", ori_vol_path)
process_vol_name = os.path.basename(ori_vol_path)
else:
logging.error(rst.stderr)
return
return process_vol_name
def check_vol(pool_name, vol_name, expect_exist=True):
"""
Check volume vol_name in pool pool_name
"""
src_volumes = src_pv.list_volumes().keys()
logging.debug("Current volumes in %s: %s", pool_name, src_volumes)
if expect_exist:
if vol_name not in src_volumes:
raise error.TestFail("Can't find volume %s in pool %s" %
(vol_name, pool_name))
# check format in volume xml
post_xml = volxml.new_from_vol_dumpxml(vol_name, pool_name)
logging.debug("Volume %s XML: %s" %
(vol_name, post_xml.xmltreefile))
if 'format' in post_xml.keys() and vol_format is not None:
if post_xml.format != vol_format:
raise error.TestFail("Volume format %s is not expected" %
vol_format + " as defined.")
else:
if vol_name in src_volumes:
raise error.TestFail(
"Find volume %s in pool %s, but expect not" %
(vol_name, pool_name))
fmt_err0 = "Unknown file format '%s'" % vol_format
fmt_err1 = "Formatting or formatting option not "
fmt_err1 += "supported for file format '%s'" % vol_format
fmt_err2 = "Driver '%s' does not support " % vol_format
fmt_err2 += "image creation"
fmt_err_list = [fmt_err0, fmt_err1, fmt_err2]
skip_msg = "Volume format '%s' is not supported by qemu-img" % vol_format
vol_path_list = []
try:
# Create the src pool
src_pool_name = "virt-%s-pool" % src_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name,
src_pool_type,
src_pool_target,
src_emulated_image,
image_size=image_size,
source_format=src_pool_format)
src_pv = libvirt_storage.PoolVolume(src_pool_name)
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create volumes by virsh in a loop
while pool_vol_num > 0:
# Set volume xml file
vol_name = prefix_vol_name + "_%s" % pool_vol_num
pool_vol_num -= 1
if by_xml:
# According to BZ#1138523, we need inpect the right name
# (disk partition) for new volume
if src_pool_type == "disk":
vol_name = utlv.new_disk_vol_name(src_pool_name)
if vol_name is None:
raise error.TestError("Fail to generate volume name")
vol_arg['name'] = vol_name
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
if params.get('setup_libvirt_polkit') == 'yes':
utils.run("chmod 666 %s" % vol_xml, ignore_status=True)
# Run virsh_vol_create to create vol
logging.debug("Create volume from XML: %s" %
newvol.xmltreefile)
cmd_result = virsh.vol_create(
src_pool_name,
vol_xml,
extra_option,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True,
debug=True)
else:
# Run virsh_vol_create_as to create_vol
cmd_result = virsh.vol_create_as(
vol_name,
src_pool_name,
vol_capacity,
vol_allocation,
vol_format,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True,
debug=True)
# Check result
try:
utlv.check_exit_status(cmd_result, status_error)
check_vol(src_pool_name, vol_name, not status_error)
if not status_error:
vol_path = virsh.vol_path(vol_name,
src_pool_name).stdout.strip()
logging.debug("Full path of %s: %s", vol_name, vol_path)
vol_path_list.append(vol_path)
except error.TestFail, e:
stderr = cmd_result.stderr
if any(err in stderr for err in fmt_err_list):
raise error.TestNAError(skip_msg)
else:
raise e
# Post process vol by other programs
process_vol_by = params.get("process_vol_by")
process_vol_type = params.get("process_vol_type", "")
expect_vol_exist = "yes" == params.get("expect_vol_exist", "yes")
if process_vol_by and vol_path_list:
process_vol = post_process_vol(vol_path_list[0])
if process_vol is not None:
try:
virsh.pool_refresh(src_pool_name, ignore_status=False)
check_vol(src_pool_name, process_vol, expect_vol_exist)
except (error.CmdError, error.TestFail), e:
if process_vol_type == "thin":
logging.error(e)
raise error.TestNAError(
"You may encounter bug BZ#1060287")
else:
raise e
else:
raise error.TestFail("Post process volume failed")
def get_vol_info(pool_name, vol_name):
"""
Parse the volume info
"""
pv = libvirt_storage.PoolVolume(pool_name)
return pv.volume_info(vol_name)
def run(test, params, env):
"""
Test virsh vol-create command to cover the following matrix:
pool_type = [dir, fs, netfs]
volume_format = [raw, bochs, cloop, cow, dmg, iso, qcow, qcow2, qed,
vmdk, vpc]
pool_type = [disk]
volume_format = [none, linux, fat16, fat32, linux-swap, linux-lvm,
linux-raid, extended]
pool_type = [logical]
volume_format = [none]
pool_type = [iscsi, scsi]
Not supported with format type
TODO:
pool_type = [rbd, glusterfs]
Reference: http://www.libvirt.org/storage.html
"""
src_pool_type = params.get("src_pool_type")
src_pool_target = params.get("src_pool_target")
src_emulated_image = params.get("src_emulated_image")
extra_option = params.get("extra_option", "")
vol_name = params.get("vol_name", "vol_create_test")
vol_format = params.get("vol_format")
lazy_refcounts = "yes" == params.get("lazy_refcounts")
status_error = "yes" == params.get("status_error", "no")
# Set volume xml attribute dictionary, extract all params start with 'vol_'
# which are for setting volume xml, except 'lazy_refcounts'.
vol_arg = {}
for key in params.keys():
if key.startswith('vol_'):
if key[4:] in ['capacity', 'allocation', 'owner', 'group']:
vol_arg[key[4:]] = int(params[key])
else:
vol_arg[key[4:]] = params[key]
vol_arg['lazy_refcounts'] = lazy_refcounts
pool_type = ['dir', 'disk', 'fs', 'logical', 'netfs', 'iscsi', 'scsi']
if src_pool_type not in pool_type:
raise error.TestNAError("pool type %s not in supported type list: %s" %
(src_pool_type, pool_type))
if not libvirt_version.version_compare(1, 0, 0):
if "--prealloc-metadata" in extra_option:
raise error.TestNAError("metadata preallocation not supported in" +
" current libvirt version.")
try:
# Create the src pool
src_pool_name = "virt-%s-pool" % src_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name,
src_pool_type,
src_pool_target,
src_emulated_image,
image_size="2G",
pre_disk_vol=["1M"])
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Set volume xml file
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
# Run virsh_vol_create to create vol
logging.debug("create volume from xml: %s" % newvol.xmltreefile)
cmd_result = virsh.vol_create(src_pool_name,
vol_xml,
extra_option,
ignore_status=True,
debug=True)
status = cmd_result.exit_status
# Check result
if not status_error:
if not status:
src_pv = libvirt_storage.PoolVolume(src_pool_name)
src_volumes = src_pv.list_volumes().keys()
logging.debug("Current volumes in %s: %s", src_pool_name,
src_volumes)
if vol_name not in src_volumes:
raise error.TestFail(
"Can't find volume: %s from pool: %s" %
(vol_name, src_pool_name))
# check format in volume xml
post_xml = volxml.new_from_vol_dumpxml(vol_name, src_pool_name)
logging.debug("the created volume xml is: %s" %
post_xml.xmltreefile)
if 'format' in post_xml.keys():
if post_xml.format != vol_format:
raise error.TestFail(
"Volume format %s is not expected" % vol_format +
" as defined.")
else:
# Skip the format not supported by qemu-img error
if vol_format:
fmt_err = "Unknown file format '%s'" % vol_format
fmt_err1 = "Formatting or formatting option not "
fmt_err1 += "supported for file format '%s'" % vol_format
fmt_err2 = "Driver '%s' does not support " % vol_format
fmt_err2 += "image creation"
if "qemu-img" in cmd_result.stderr:
er = cmd_result.stderr
if fmt_err in er or fmt_err1 in er or fmt_err2 in er:
err_msg = "Volume format '%s' is not" % vol_format
err_msg += " supported by qemu-img."
raise error.TestNAError(err_msg)
else:
raise error.TestFail("Run failed with right command.")
else:
raise error.TestFail("Run failed with right command.")
else:
if status:
logging.debug("Expect error: %s", cmd_result.stderr)
else:
raise error.TestFail("Expect fail, but run successfully!")
finally:
# Cleanup
try:
pvt.cleanup_pool(src_pool_name, src_pool_type, src_pool_target,
src_emulated_image)
except error.TestFail, detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh undefine command.
Undefine an inactive domain, or convert persistent to transient.
1.Prepare test environment.
2.Backup the VM's information to a xml file.
3.When the libvirtd == "off", stop the libvirtd service.
4.Perform virsh undefine operation.
5.Recover test environment.(libvirts service,VM)
6.Confirm the test result.
"""
vm_ref = params.get("undefine_vm_ref", "vm_name")
extra = params.get("undefine_extra", "")
option = params.get("undefine_option", "")
libvirtd_state = params.get("libvirtd", "on")
status_error = ("yes" == params.get("status_error", "no"))
undefine_twice = ("yes" == params.get("undefine_twice", 'no'))
local_ip = params.get("local_ip", "LOCAL.EXAMPLE.COM")
local_pwd = params.get("local_pwd", "password")
remote_ip = params.get("remote_ip", "REMOTE.EXAMPLE.COM")
remote_user = params.get("remote_user", "user")
remote_pwd = params.get("remote_pwd", "password")
remote_prompt = params.get("remote_prompt", "#")
pool_type = params.get("pool_type")
pool_name = params.get("pool_name", "test")
pool_target = params.get("pool_target")
volume_size = params.get("volume_size", "1G")
vol_name = params.get("vol_name", "test_vol")
emulated_img = params.get("emulated_img", "emulated_img")
emulated_size = "%sG" % (int(volume_size[:-1]) + 1)
disk_target = params.get("disk_target", "vdb")
wipe_data = "yes" == params.get("wipe_data", "no")
if wipe_data:
option += " --wipe-storage"
nvram_o = None
if platform.machine() == 'aarch64':
nvram_o = " --nvram"
option += nvram_o
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
vm_id = vm.get_id()
vm_uuid = vm.get_uuid()
# polkit acl related params
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
test.cancel("API acl test not supported in current"
" libvirt version.")
# Back up xml file.Xen host has no guest xml file to define a guset.
backup_xml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Confirm how to reference a VM.
if vm_ref == "vm_name":
vm_ref = vm_name
elif vm_ref == "id":
vm_ref = vm_id
elif vm_ref == "hex_vm_id":
vm_ref = hex(int(vm_id))
elif vm_ref == "uuid":
vm_ref = vm_uuid
elif vm_ref.find("invalid") != -1:
vm_ref = params.get(vm_ref)
volume = None
pvtest = None
status3 = None
elems = backup_xml.xmltreefile.findall('/devices/disk/source')
existing_images = [elem.get('file') for elem in elems]
# Backup images since remove-all-storage could remove existing libvirt
# managed guest images
if existing_images and option.count("remove-all-storage"):
for img in existing_images:
backup_img = img + '.bak'
logging.info('Backup %s to %s', img, backup_img)
shutil.copyfile(img, backup_img)
try:
save_file = "/var/lib/libvirt/qemu/save/%s.save" % vm_name
if option.count("managedsave") and vm.is_alive():
virsh.managedsave(vm_name)
if not vm.is_lxc():
snp_list = virsh.snapshot_list(vm_name)
if option.count("snapshot"):
snp_file_list = []
if not len(snp_list):
virsh.snapshot_create(vm_name)
logging.debug("Create a snapshot for test!")
else:
# Backup snapshots for domain
for snp_item in snp_list:
tmp_file = os.path.join(data_dir.get_tmp_dir(),
snp_item + ".xml")
virsh.snapshot_dumpxml(vm_name,
snp_item,
to_file=tmp_file)
snp_file_list.append(tmp_file)
else:
if len(snp_list):
test.cancel("This domain has snapshot(s), "
"cannot be undefined!")
if option.count("remove-all-storage"):
pvtest = utlv.PoolVolumeTest(test, params)
pvtest.pre_pool(pool_name,
pool_type,
pool_target,
emulated_img,
emulated_size=emulated_size)
new_pool = libvirt_storage.PoolVolume(pool_name)
if not new_pool.create_volume(vol_name, volume_size):
test.fail("Creation of volume %s failed." % vol_name)
volumes = new_pool.list_volumes()
volume = volumes[vol_name]
ret = virsh.attach_disk(vm_name,
volume,
disk_target,
"--config",
debug=True)
if ret.exit_status != 0:
test.error("Attach disk failed: %s" % ret.stderr)
# Turn libvirtd into certain state.
if libvirtd_state == "off":
utils_libvirtd.libvirtd_stop()
# Test virsh undefine command.
output = ""
if vm_ref != "remote":
vm_ref = "%s %s" % (vm_ref, extra)
cmdresult = virsh.undefine(vm_ref,
option,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True,
debug=True)
status = cmdresult.exit_status
output = cmdresult.stdout.strip()
if status:
logging.debug("Error status, command output: %s",
cmdresult.stderr.strip())
if undefine_twice:
status2 = virsh.undefine(vm_ref, nvram_o,
ignore_status=True).exit_status
else:
if remote_ip.count("EXAMPLE.COM") or local_ip.count("EXAMPLE.COM"):
test.cancel("remote_ip and/or local_ip parameters"
" not changed from default values")
try:
local_user = params.get("username", "root")
uri = libvirt_vm.complete_uri(local_ip)
# setup ssh auto login from remote machine to test machine
# for the command to execute remotely
ssh_key.setup_remote_ssh_key(remote_ip,
remote_user,
remote_pwd,
hostname2=local_ip,
user2=local_user,
password2=local_pwd)
session = remote.remote_login("ssh", remote_ip, "22",
remote_user, remote_pwd,
remote_prompt)
cmd_undefine = "virsh -c %s undefine %s" % (uri, vm_name)
status, output = session.cmd_status_output(cmd_undefine)
logging.info("Undefine output: %s", output)
except (process.CmdError, remote.LoginError,
aexpect.ShellError) as de:
logging.error("Detail: %s", de)
status = 1
# Recover libvirtd state.
if libvirtd_state == "off":
utils_libvirtd.libvirtd_start()
# Shutdown VM.
if virsh.domain_exists(vm.name):
try:
if vm.is_alive():
vm.destroy(gracefully=False)
except process.CmdError as detail:
logging.error("Detail: %s", detail)
# After vm.destroy, virsh.domain_exists returns True due to
# timing issue and tests fails.
time.sleep(2)
# Check if VM exists.
vm_exist = virsh.domain_exists(vm_name)
# Check if xml file exists.
xml_exist = False
if vm.is_qemu() and os.path.exists(
"/etc/libvirt/qemu/%s.xml" % vm_name):
xml_exist = True
if vm.is_lxc() and os.path.exists("/etc/libvirt/lxc/%s.xml" % vm_name):
xml_exist = True
if vm.is_xen() and os.path.exists("/etc/xen/%s" % vm_name):
xml_exist = True
# Check if save file exists if use --managed-save
save_exist = os.path.exists(save_file)
# Check if save file exists if use --managed-save
volume_exist = volume and os.path.exists(volume)
# Test define with acl control and recover domain.
if params.get('setup_libvirt_polkit') == 'yes':
if virsh.domain_exists(vm.name):
virsh.undefine(vm_ref, nvram_o, ignore_status=True)
cmd = "chmod 666 %s" % backup_xml.xml
process.run(cmd, ignore_status=False, shell=True)
s_define = virsh.define(backup_xml.xml,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True,
debug=True)
status3 = s_define.exit_status
finally:
# Recover main VM.
try:
backup_xml.sync()
except LibvirtXMLError:
# sync() tries to undefines and define the xml to sync
# but virsh_undefine test would have undefined already
# may lead to error out
backup_xml.define()
# Recover existing guest images
if existing_images and option.count("remove-all-storage"):
for img in existing_images:
backup_img = img + '.bak'
logging.info('Recover image %s to %s', backup_img, img)
shutil.move(backup_img, img)
# Clean up pool
if pvtest:
pvtest.cleanup_pool(pool_name, pool_type, pool_target,
emulated_img)
# Recover VM snapshots.
if option.count("snapshot") and (not vm.is_lxc()):
logging.debug("Recover snapshots for domain!")
for file_item in snp_file_list:
virsh.snapshot_create(vm_name, file_item)
# Check results.
if status_error:
if not status:
if libvirtd_state == "off" and libvirt_version.version_compare(
5, 6, 0):
logging.info(
"From libvirt version 5.6.0 libvirtd is restarted "
"and command should succeed")
else:
test.fail("virsh undefine return unexpected result.")
if params.get('setup_libvirt_polkit') == 'yes':
if status3 == 0:
test.fail("virsh define with false acl permission" +
" should failed.")
else:
if status:
test.fail("virsh undefine failed.")
if undefine_twice:
if not status2:
test.fail("Undefine the same VM twice succeeded.")
if vm_exist:
test.fail("VM still exists after undefine.")
if xml_exist:
test.fail("Xml file still exists after undefine.")
if option.count("managedsave") and save_exist:
test.fail("Save file still exists after undefine.")
if option.count("remove-all-storage") and volume_exist:
test.fail("Volume file '%s' still exists after"
" undefine." % volume)
if wipe_data and option.count("remove-all-storage"):
if not output.count("Wiping volume '%s'" % disk_target):
test.fail("Command didn't wipe volume storage!")
if params.get('setup_libvirt_polkit') == 'yes':
if status3:
test.fail("virsh define with right acl permission" +
" should succeeded")
fmt_err1 += "supported for file format '%s'" % vol_format
fmt_err2 = "Driver '%s' does not support " % vol_format
fmt_err2 += "image creation"
fmt_err_list = [fmt_err0, fmt_err1, fmt_err2]
skip_msg = "Volume format '%s' is not supported by qemu-img" % vol_format
vol_path_list = []
secret_uuids = []
try:
# Create the src pool
src_pool_name = "virt-%s-pool" % src_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name, src_pool_type, src_pool_target,
src_emulated_image, image_size=image_size,
source_format=src_pool_format)
src_pv = libvirt_storage.PoolVolume(src_pool_name)
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create volumes by virsh in a loop
while pool_vol_num > 0:
# Set volume xml file
vol_name = prefix_vol_name + "_%s" % pool_vol_num
pool_vol_num -= 1
if by_xml:
# According to BZ#1138523, we need inpect the right name
# (disk partition) for new volume
if src_pool_type == "disk":
vol_name = utlv.new_disk_vol_name(src_pool_name)
if vol_name is None:
def check_vol(expected, avail=True):
"""
Checks the expected volume details with actual volume details from
vol-dumpxml
vol-list
vol-info
vol-key
vol-path
qemu-img info
"""
error_count = 0
pv = libvirt_storage.PoolVolume(expected['pool_name'])
vol_exists = pv.volume_exists(expected['name'])
if vol_exists:
if not avail:
error_count += 1
logging.error("Expect volume %s not exists but find it",
expected['name'])
return error_count
else:
if avail:
error_count += 1
logging.error("Expect volume %s exists but not find it",
expected['name'])
return error_count
else:
logging.info("Volume %s checked successfully for deletion",
expected['name'])
return error_count
actual_list = get_vol_list(expected['pool_name'], expected['name'])
actual_info = pv.volume_info(expected['name'])
# Get values from vol-dumpxml
volume_xml = vol_xml.VolXML.new_from_vol_dumpxml(
expected['name'], expected['pool_name'])
# Check against virsh vol-key
vol_key = virsh.vol_key(expected['name'], expected['pool_name'])
if vol_key.stdout.strip() != volume_xml.key:
logging.error(
"Volume key is mismatch \n%s"
"Key from xml: %s\nKey from command: %s", expected['name'],
volume_xml.key, vol_key)
error_count += 1
else:
logging.debug(
"virsh vol-key for volume: %s successfully"
" checked against vol-dumpxml", expected['name'])
# Check against virsh vol-name
get_vol_name = virsh.vol_name(expected['path'])
if get_vol_name.stdout.strip() != expected['name']:
logging.error(
"Volume name mismatch\n"
"Expected name: %s\nOutput of vol-name: %s", expected['name'],
get_vol_name)
# Check against virsh vol-path
vol_path = virsh.vol_path(expected['name'], expected['pool_name'])
if expected['path'] != vol_path.stdout.strip():
logging.error(
"Volume path mismatch for volume: %s\n"
"Expected path: %s\nOutput of vol-path: %s\n",
expected['name'], expected['path'], vol_path)
error_count += 1
else:
logging.debug(
"virsh vol-path for volume: %s successfully checked"
" against created volume path", expected['name'])
# Check path against virsh vol-list
if expected['path'] != actual_list['path']:
logging.error(
"Volume path mismatch for volume:%s\n"
"Expected Path: %s\nPath from virsh vol-list: %s",
expected['name'], expected['path'], actual_list['path'])
error_count += 1
else:
logging.debug(
"Path of volume: %s from virsh vol-list "
"successfully checked against created "
"volume path", expected['name'])
# Check path against virsh vol-dumpxml
if expected['path'] != volume_xml.path:
logging.error(
"Volume path mismatch for volume: %s\n"
"Expected Path: %s\nPath from virsh vol-dumpxml: %s",
expected['name'], expected['path'], volume_xml.path)
error_count += 1
else:
logging.debug(
"Path of volume: %s from virsh vol-dumpxml "
"successfully checked against created volume path",
expected['name'])
# Check type against virsh vol-list
if expected['type'] != actual_list['type']:
logging.error(
"Volume type mismatch for volume: %s\n"
"Expected Type: %s\n Type from vol-list: %s", expected['name'],
expected['type'], actual_list['type'])
error_count += 1
else:
logging.debug(
"Type of volume: %s from virsh vol-list "
"successfully checked against the created "
"volume type", expected['name'])
# Check type against virsh vol-info
if expected['type'] != actual_info['Type']:
logging.error(
"Volume type mismatch for volume: %s\n"
"Expected Type: %s\n Type from vol-info: %s", expected['name'],
expected['type'], actual_info['Type'])
error_count += 1
else:
logging.debug(
"Type of volume: %s from virsh vol-info successfully"
" checked against the created volume type", expected['name'])
# Check name against virsh vol-info
if expected['name'] != actual_info['Name']:
logging.error(
"Volume name mismatch for volume: %s\n"
"Expected name: %s\n Name from vol-info: %s", expected['name'],
expected['name'], actual_info['Name'])
error_count += 1
else:
logging.debug(
"Name of volume: %s from virsh vol-info successfully"
" checked against the created volume name", expected['name'])
# Check format from against qemu-img info
img_info = utils_misc.get_image_info(expected['path'])
if expected['format']:
if expected['format'] != img_info['format']:
logging.error(
"Volume format mismatch for volume: %s\n"
"Expected format: %s\n"
"Format from qemu-img info: %s", expected['name'],
expected['format'], img_info['format'])
error_count += 1
else:
logging.debug(
"Format of volume: %s from qemu-img info "
"checked successfully against the created "
"volume format", expected['name'])
# Check format against vol-dumpxml
if expected['format']:
if expected['format'] != volume_xml.format:
logging.error(
"Volume format mismatch for volume: %s\n"
"Expected format: %s\n"
"Format from vol-dumpxml: %s", expected['name'],
expected['format'], volume_xml.format)
error_count += 1
else:
logging.debug(
"Format of volume: %s from virsh vol-dumpxml "
"checked successfully against the created"
" volume format", expected['name'])
logging.info(expected['encrypt_format'])
# Check encrypt against vol-dumpxml
if expected['encrypt_format']:
# As the 'default' format will change to specific valut(qcow), so
# just output it here
logging.debug("Encryption format of volume '%s' is: %s",
expected['name'], volume_xml.encryption.format)
# And also output encryption secret uuid
secret_uuid = volume_xml.encryption.secret['uuid']
logging.debug("Encryption secret of volume '%s' is: %s",
expected['name'], secret_uuid)
if expected['encrypt_secret']:
if expected['encrypt_secret'] != secret_uuid:
logging.error(
"Encryption secret mismatch for volume: %s\n"
"Expected secret uuid: %s\n"
"Secret uuid from vol-dumpxml: %s", expected['name'],
expected['encrypt_secret'], secret_uuid)
error_count += 1
else:
# If no set encryption secret value, automatically
# generate a secret value at the time of volume creation
logging.debug("Volume encryption secret is %s",
secret_uuid)
# Check pool name against vol-pool
vol_pool = virsh.vol_pool(expected['path'])
if expected['pool_name'] != vol_pool.stdout.strip():
logging.error(
"Pool name mismatch for volume: %s against"
"virsh vol-pool", expected['name'])
error_count += 1
else:
logging.debug(
"Pool name of volume: %s checked successfully"
" against the virsh vol-pool", expected['name'])
norm_cap = {}
capacity = {}
capacity['list'] = actual_list['capacity']
capacity['info'] = actual_info['Capacity']
capacity['xml'] = volume_xml.capacity
capacity['qemu_img'] = img_info['vsize']
norm_cap = norm_capacity(capacity)
delta_size = int(params.get('delta_size', "1024"))
if abs(expected['capacity'] - norm_cap['list']) > delta_size:
logging.error(
"Capacity mismatch for volume: %s against virsh"
" vol-list\nExpected: %s\nActual: %s", expected['name'],
expected['capacity'], norm_cap['list'])
error_count += 1
else:
logging.debug(
"Capacity value checked successfully against"
" virsh vol-list for volume %s", expected['name'])
if abs(expected['capacity'] - norm_cap['info']) > delta_size:
logging.error(
"Capacity mismatch for volume: %s against virsh"
" vol-info\nExpected: %s\nActual: %s", expected['name'],
expected['capacity'], norm_cap['info'])
error_count += 1
else:
logging.debug(
"Capacity value checked successfully against"
" virsh vol-info for volume %s", expected['name'])
if abs(expected['capacity'] - norm_cap['xml']) > delta_size:
logging.error(
"Capacity mismatch for volume: %s against virsh"
" vol-dumpxml\nExpected: %s\nActual: %s", expected['name'],
expected['capacity'], norm_cap['xml'])
error_count += 1
else:
logging.debug(
"Capacity value checked successfully against"
" virsh vol-dumpxml for volume: %s", expected['name'])
if abs(expected['capacity'] - norm_cap['qemu_img']) > delta_size:
logging.error(
"Capacity mismatch for volume: %s against "
"qemu-img info\nExpected: %s\nActual: %s", expected['name'],
expected['capacity'], norm_cap['qemu_img'])
error_count += 1
else:
logging.debug(
"Capacity value checked successfully against"
" qemu-img info for volume: %s", expected['name'])
return error_count
def run(test, params, env):
"""
Test virsh vol-create and vol-create-as command to cover the following matrix:
pool_type = [dir, fs, netfs]
volume_format = [raw, bochs, cloop, cow, dmg, iso, qcow, qcow2, qed,
vmdk, vpc]
pool_type = [disk]
volume_format = [none, linux, fat16, fat32, linux-swap, linux-lvm,
linux-raid, extended]
pool_type = [logical]
volume_format = [none]
pool_type = [iscsi, scsi]
Not supported with format type
TODO:
pool_type = [rbd, glusterfs]
Reference: http://www.libvirt.org/storage.html
"""
src_pool_type = params.get("src_pool_type")
src_pool_target = params.get("src_pool_target")
src_pool_format = params.get("src_pool_format", "")
pool_vol_num = int(params.get("src_pool_vol_num", '1'))
src_emulated_image = params.get("src_emulated_image")
extra_option = params.get("extra_option", "")
prefix_vol_name = params.get("vol_name", "vol_create_test")
vol_format = params.get("vol_format", "raw")
vol_capacity = params.get("vol_capacity", 1048576)
vol_allocation = params.get("vol_allocation", 1048576)
image_size = params.get("emulate_image_size", "1G")
lazy_refcounts = "yes" == params.get("lazy_refcounts")
status_error = "yes" == params.get("status_error", "no")
by_xml = "yes" == params.get("create_vol_by_xml", "yes")
incomplete_target = "yes" == params.get("incomplete_target", "no")
luks_encrypted = "luks" == params.get("encryption_method")
encryption_secret_type = params.get("encryption_secret_type", "passphrase")
virsh_readonly_mode = 'yes' == params.get("virsh_readonly", "no")
if not libvirt_version.version_compare(1, 0, 0):
if "--prealloc-metadata" in extra_option:
test.cancel("metadata preallocation not supported in"
" current libvirt version.")
if incomplete_target:
test.cancel("It does not support generate target path"
"in current libvirt version.")
pool_type = ['dir', 'disk', 'fs', 'logical', 'netfs', 'iscsi', 'scsi']
if src_pool_type not in pool_type:
test.cancel("pool type %s not in supported type list: %s" %
(src_pool_type, pool_type))
# libvirt acl polkit related params
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
test.cancel("API acl test not supported in current"
" libvirt version.")
uri = params.get("virsh_uri")
unprivileged_user = params.get('unprivileged_user')
if unprivileged_user:
if unprivileged_user.count('EXAMPLE'):
unprivileged_user = '******'
# Stop multipathd to avoid start pool fail(For fs like pool, the new add
# disk may in use by device-mapper, so start pool will report disk already
# mounted error).
multipathd = service.Factory.create_service("multipathd")
multipathd_status = multipathd.status()
if multipathd_status:
multipathd.stop()
# Set volume xml attribute dictionary, extract all params start with 'vol_'
# which are for setting volume xml, except 'lazy_refcounts'.
vol_arg = {}
for key in params.keys():
if key.startswith('vol_'):
if key[4:] in ['capacity', 'allocation', 'owner', 'group']:
vol_arg[key[4:]] = int(params[key])
else:
vol_arg[key[4:]] = params[key]
vol_arg['lazy_refcounts'] = lazy_refcounts
def create_luks_secret(vol_path):
"""
Create secret for luks encryption
:param vol_path. volume path.
:return: secret id if create successfully.
"""
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "volume secret"
sec_xml.usage = 'volume'
sec_xml.volume = vol_path
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
utlv.check_exit_status(ret)
# Get secret uuid.
try:
encryption_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
except IndexError as detail:
test.error("Fail to get newly created secret uuid")
logging.debug("Secret uuid %s", encryption_uuid)
# Set secret value.
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(
'redhat'.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(encryption_uuid, secret_string)
utlv.check_exit_status(ret)
return encryption_uuid
def post_process_vol(ori_vol_path):
"""
Create or disactive a volume without libvirt
:param ori_vol_path: Full path of an original volume
:retur: Volume name for checking
"""
process_vol_name = params.get("process_vol_name", "process_vol")
process_vol_options = params.get("process_vol_options", "")
process_vol_capacity = params.get("process_vol_capacity", vol_capacity)
process_vol_cmd = ""
unsupport_err = "Unsupport do '%s %s' in this test" % (
process_vol_by, process_vol_type)
if process_vol_by == "lvcreate":
process_vol_cmd = "lvcreate -L %s " % process_vol_capacity
if process_vol_type == "thin":
if not process_vol_options:
process_vol_options = "-T "
process_vol_cmd += "%s " % process_vol_options
processthin_pool_name = params.get("processthin_pool_name",
"thinpool")
processthin_vol_name = params.get("processthin_vol_name",
"thinvol")
process_vol_capacity = params.get("process_vol_capacity", "1G")
os.path.dirname(ori_vol_path)
process_vol_cmd += "%s/%s " % (os.path.dirname(ori_vol_path),
processthin_pool_name)
process_vol_cmd += "-V %s " % process_vol_capacity
process_vol_cmd += "-n %s " % processthin_vol_name
process_vol_name = processthin_vol_name
elif process_vol_type == "snapshot":
if not process_vol_options:
process_vol_options = "-s "
process_vol_cmd += "%s " % process_vol_options
process_vol_cmd += "-n %s " % process_vol_name
process_vol_cmd += "%s " % (ori_vol_path)
else:
logging.error(unsupport_err)
return
elif process_vol_by == "qemu-img" and process_vol_type == "create":
process_vol_cmd = "qemu-img create "
process_vol_path = os.path.dirname(ori_vol_path) + "/"
process_vol_path += process_vol_name
process_vol_cmd += "%s " % process_vol_options
process_vol_cmd += "%s " % process_vol_path
process_vol_cmd += "%s " % process_vol_capacity
elif process_vol_by == "lvchange" and process_vol_type == "deactivate":
process_vol_cmd = "lvchange %s " % ori_vol_path
if not process_vol_options:
process_vol_options = "-an"
process_vol_cmd += process_vol_options
else:
logging.error(unsupport_err)
return
rst = process.run(process_vol_cmd, ignore_status=True, shell=True)
if rst.exit_status:
if "Snapshots of snapshots are not supported" in rst.stderr_text:
logging.debug("%s is already a snapshot volume", ori_vol_path)
process_vol_name = os.path.basename(ori_vol_path)
else:
logging.error(rst.stderr_text)
return
return process_vol_name
def check_vol(pool_name, vol_name, expect_exist=True):
"""
Check volume vol_name in pool pool_name
"""
src_volumes = src_pv.list_volumes().keys()
logging.debug("Current volumes in %s: %s", pool_name, src_volumes)
if expect_exist:
if vol_name not in src_volumes:
test.fail("Can't find volume %s in pool %s" %
(vol_name, pool_name))
# check format in volume xml
volxml = libvirt_xml.VolXML()
post_xml = volxml.new_from_vol_dumpxml(vol_name, pool_name)
logging.debug("Volume %s XML: %s" %
(vol_name, post_xml.xmltreefile))
if 'format' in post_xml.keys() and vol_format is not None:
if post_xml.format != vol_format:
test.fail("Volume format %s is not expected" % vol_format +
" as defined.")
else:
if vol_name in src_volumes:
test.fail("Find volume %s in pool %s, but expect not" %
(vol_name, pool_name))
fmt_err0 = "Unknown file format '%s'" % vol_format
fmt_err1 = "Formatting or formatting option not "
fmt_err1 += "supported for file format '%s'" % vol_format
fmt_err2 = "Driver '%s' does not support " % vol_format
fmt_err2 += "image creation"
fmt_err_list = [fmt_err0, fmt_err1, fmt_err2]
skip_msg = "Volume format '%s' is not supported by qemu-img" % vol_format
vol_path_list = []
secret_uuids = []
try:
# Create the src pool
src_pool_name = "virt-%s-pool" % src_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name,
src_pool_type,
src_pool_target,
src_emulated_image,
image_size=image_size,
source_format=src_pool_format)
src_pv = libvirt_storage.PoolVolume(src_pool_name)
src_pool_uuid = libvirt_storage.StoragePool().pool_info(
src_pool_name)['UUID']
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create volumes by virsh in a loop
while pool_vol_num > 0:
# Set volume xml file
vol_name = prefix_vol_name + "_%s" % pool_vol_num
bad_vol_name = params.get("bad_vol_name", "")
if bad_vol_name:
vol_name = bad_vol_name
pool_vol_num -= 1
# disk partition for new volume
if src_pool_type == "disk":
vol_name = utlv.new_disk_vol_name(src_pool_name)
if vol_name is None:
test.error("Fail to generate volume name")
if by_xml:
# According to BZ#1138523, we need inpect the right name
# (disk partition) for new volume
if src_pool_type == "disk":
vol_name = utlv.new_disk_vol_name(src_pool_name)
if vol_name is None:
test.error("Fail to generate volume name")
vol_arg['name'] = vol_name
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
if luks_encrypted:
# For luks encrypted disk, add related xml in newvol
luks_encryption_params = {}
luks_encryption_params.update({"format": "luks"})
luks_secret_uuid = create_luks_secret(
os.path.join(src_pool_target, vol_name))
secret_uuids.append(luks_secret_uuid)
luks_encryption_params.update({
"secret": {
"type": encryption_secret_type,
"uuid": luks_secret_uuid
}
})
newvol.encryption = volxml.new_encryption(
**luks_encryption_params)
vol_xml = newvol['xml']
if params.get('setup_libvirt_polkit') == 'yes':
process.run("chmod 666 %s" % vol_xml,
ignore_status=True,
shell=True)
if luks_encrypted and libvirt_version.version_compare(
4, 5, 0):
try:
polkit = test_setup.LibvirtPolkitConfig(params)
polkit_rules_path = polkit.polkit_rules_path
with open(polkit_rules_path, 'r+') as f:
rule = f.readlines()
for index, v in enumerate(rule):
if v.find("secret") >= 0:
nextline = rule[index + 1]
s = nextline.replace(
"QEMU", "secret").replace(
"pool_name",
"secret_uuid").replace(
"virt-dir-pool",
"%s" % luks_secret_uuid)
rule[index + 1] = s
rule = ''.join(rule)
with open(polkit_rules_path, 'w+') as f:
f.write(rule)
logging.debug(rule)
polkit.polkitd.restart()
except IOError as e:
logging.error(e)
# Run virsh_vol_create to create vol
logging.debug("Create volume from XML: %s" %
newvol.xmltreefile)
cmd_result = virsh.vol_create(
src_pool_name,
vol_xml,
extra_option,
unprivileged_user=unprivileged_user,
uri=uri,
ignore_status=True,
debug=True)
else:
# Run virsh_vol_create_as to create_vol
pool_name = src_pool_name
if params.get("create_vol_by_pool_uuid") == "yes":
pool_name = src_pool_uuid
cmd_result = virsh.vol_create_as(
vol_name,
pool_name,
vol_capacity,
vol_allocation,
vol_format,
extra_option,
unprivileged_user=unprivileged_user,
uri=uri,
readonly=virsh_readonly_mode,
ignore_status=True,
debug=True)
# Check result
try:
utlv.check_exit_status(cmd_result, status_error)
check_vol(src_pool_name, vol_name, not status_error)
if bad_vol_name:
pattern = "volume name '%s' cannot contain '/'" % vol_name
logging.debug("pattern: %s", pattern)
if "\\" in pattern and by_xml:
pattern = pattern.replace("\\", "\\\\")
if re.search(pattern, cmd_result.stderr) is None:
test.fail("vol-create failed with unexpected reason")
if not status_error:
vol_path = virsh.vol_path(vol_name,
src_pool_name).stdout.strip()
logging.debug("Full path of %s: %s", vol_name, vol_path)
vol_path_list.append(vol_path)
except exceptions.TestFail as detail:
stderr = cmd_result.stderr
if any(err in stderr for err in fmt_err_list):
test.cancel(skip_msg)
else:
test.fail("Create volume fail:\n%s" % detail)
# Post process vol by other programs
process_vol_by = params.get("process_vol_by")
process_vol_type = params.get("process_vol_type", "")
expect_vol_exist = "yes" == params.get("expect_vol_exist", "yes")
if process_vol_by and vol_path_list:
process_vol = post_process_vol(vol_path_list[0])
if process_vol is not None:
try:
virsh.pool_refresh(src_pool_name, ignore_status=False)
check_vol(src_pool_name, process_vol, expect_vol_exist)
except (process.CmdError, exceptions.TestFail) as detail:
if process_vol_type == "thin":
logging.error(str(detail))
test.cancel("You may encounter bug BZ#1060287")
else:
test.fail("Fail to refresh pool:\n%s" % detail)
else:
test.fail("Post process volume failed")
finally:
# Cleanup
# For old version lvm2(2.02.106 or early), deactivate volume group
# (destroy libvirt logical pool) will fail if which has deactivated
# lv snapshot, so before destroy the pool, we need activate it manually
if src_pool_type == 'logical' and vol_path_list:
vg_name = vol_path_list[0].split('/')[2]
process.run("lvchange -ay %s" % vg_name, shell=True)
try:
pvt.cleanup_pool(src_pool_name, src_pool_type, src_pool_target,
src_emulated_image)
for secret_uuid in set(secret_uuids):
virsh.secret_undefine(secret_uuid)
except exceptions.TestFail as detail:
logging.error(str(detail))
if multipathd_status:
multipathd.start()
def run(test, params, env):
"""
Test virsh snapshot command when disk in all kinds of type.
(1). Init the variables from params.
(2). Create a image by specifice format.
(3). Attach disk to vm.
(4). Snapshot create.
(5). Snapshot revert.
(6). cleanup.
"""
# Init variables.
vm_name = params.get("main_vm", "virt-tests-vm1")
vm = env.get_vm(vm_name)
image_format = params.get("snapshot_image_format", "qcow2")
snapshot_del_test = "yes" == params.get("snapshot_del_test", "no")
status_error = ("yes" == params.get("status_error", "no"))
snapshot_from_xml = ("yes" == params.get("snapshot_from_xml", "no"))
snapshot_current = ("yes" == params.get("snapshot_current", "no"))
snapshot_revert_paused = ("yes" == params.get("snapshot_revert_paused",
"no"))
# Pool variables.
snapshot_with_pool = "yes" == params.get("snapshot_with_pool", "no")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image")
vol_name = params.get("vol_name")
vol_format = params.get("vol_format")
lazy_refcounts = "yes" == params.get("lazy_refcounts")
options = params.get("snapshot_options", "")
# Set volume xml attribute dictionary, extract all params start with 'vol_'
# which are for setting volume xml, except 'lazy_refcounts'.
vol_arg = {}
for key in params.keys():
if key.startswith('vol_'):
if key[4:] in ['capacity', 'allocation', 'owner', 'group']:
vol_arg[key[4:]] = int(params[key])
else:
vol_arg[key[4:]] = params[key]
vol_arg['lazy_refcounts'] = lazy_refcounts
supported_pool_list = [
"dir", "fs", "netfs", "logical", "iscsi", "disk", "gluster"
]
if snapshot_with_pool:
if pool_type not in supported_pool_list:
raise error.TestNAError("%s not in support list %s" %
(pool_target, supported_pool_list))
# Do xml backup for final recovery
vmxml_backup = libvirt_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Some variable for xmlfile of snapshot.
snapshot_memory = params.get("snapshot_memory", "internal")
snapshot_disk = params.get("snapshot_disk", "internal")
# Skip 'qed' cases for libvirt version greater than 1.1.0
if libvirt_version.version_compare(1, 1, 0):
if vol_format == "qed":
raise error.TestNAError("QED support changed, check bug: "
"https://bugzilla.redhat.com/show_bug.cgi"
"?id=731570")
# Init snapshot_name
snapshot_name = None
snapshot_external_disk = []
snapshot_xml_path = None
del_status = None
image = None
pvt = None
# Get a tmp dir
tmp_dir = data_dir.get_tmp_dir()
snap_cfg_path = "/var/lib/libvirt/qemu/snapshot/%s/" % vm_name
try:
if snapshot_with_pool:
# Create dst pool for create attach vol img
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(pool_name,
pool_type,
pool_target,
emulated_image,
image_size="1G",
pre_disk_vol=["20M"])
if pool_type in ["iscsi", "disk"]:
# iscsi and disk pool did not support create volume in libvirt,
# logical pool could use libvirt to create volume but volume
# format is not supported and will be 'raw' as default.
pv = libvirt_storage.PoolVolume(pool_name)
vols = pv.list_volumes().keys()
if vols:
vol_name = vols[0]
else:
raise error.TestNAError("No volume in pool: %s", pool_name)
else:
# Set volume xml file
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
# Run virsh_vol_create to create vol
logging.debug("create volume from xml: %s" %
newvol.xmltreefile)
cmd_result = virsh.vol_create(pool_name,
vol_xml,
ignore_status=True,
debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to create attach volume.")
cmd_result = virsh.vol_path(vol_name, pool_name, debug=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to get volume path from pool.")
img_path = cmd_result.stdout.strip()
if pool_type in ["logical", "iscsi", "disk"]:
# Use qemu-img to format logical, iscsi and disk block device
if vol_format != "raw":
cmd = "qemu-img create -f %s %s 10M" % (vol_format,
img_path)
cmd_result = utils.run(cmd, ignore_status=True)
if cmd_result.exit_status:
raise error.TestNAError("Failed to format volume, %s" %
cmd_result.stdout.strip())
extra = "--persistent --subdriver %s" % vol_format
else:
# Create a image.
params['image_name'] = "snapshot_test"
params['image_format'] = image_format
params['image_size'] = "1M"
image = qemu_storage.QemuImg(params, tmp_dir, "snapshot_test")
img_path, _ = image.create(params)
extra = "--persistent --subdriver %s" % image_format
# Do the attach action.
out = utils.run("qemu-img info %s" % img_path)
logging.debug("The img info is:\n%s" % out.stdout.strip())
result = virsh.attach_disk(vm_name,
source=img_path,
target="vdf",
extra=extra,
debug=True)
if result.exit_status:
raise error.TestNAError("Failed to attach disk %s to VM."
"Detail: %s." % (img_path, result.stderr))
# Create snapshot.
if snapshot_from_xml:
snapshot_name = "snapshot_test"
lines = [
"<domainsnapshot>\n",
"<name>%s</name>\n" % snapshot_name,
"<description>Snapshot Test</description>\n"
]
if snapshot_memory == "external":
memory_external = os.path.join(tmp_dir, "snapshot_memory")
snapshot_external_disk.append(memory_external)
lines.append("<memory snapshot=\'%s\' file='%s'/>\n" %
(snapshot_memory, memory_external))
else:
lines.append("<memory snapshot='%s'/>\n" % snapshot_memory)
# Add all disks into xml file.
disks = vm.get_disk_devices().values()
lines.append("<disks>\n")
for disk in disks:
lines.append("<disk name='%s' snapshot='%s'>\n" %
(disk['source'], snapshot_disk))
if snapshot_disk == "external":
snap_path = "%s.snap" % os.path.basename(disk['source'])
disk_external = os.path.join(tmp_dir, snap_path)
snapshot_external_disk.append(disk_external)
lines.append("<source file='%s'/>\n" % disk_external)
lines.append("</disk>\n")
lines.append("</disks>\n")
lines.append("</domainsnapshot>")
snapshot_xml_path = "%s/snapshot_xml" % tmp_dir
snapshot_xml_file = open(snapshot_xml_path, "w")
snapshot_xml_file.writelines(lines)
snapshot_xml_file.close()
logging.debug("The xml content for snapshot create is:")
with open(snapshot_xml_path, 'r') as fin:
logging.debug(fin.read())
options += " --xmlfile %s " % snapshot_xml_path
snapshot_result = virsh.snapshot_create(vm_name,
options,
debug=True)
out_err = snapshot_result.stderr.strip()
if snapshot_result.exit_status:
if status_error:
return
else:
if re.search(
"live disk snapshot not supported with this QEMU binary",
out_err):
raise error.TestNAError(out_err)
if libvirt_version.version_compare(1, 2, 5):
# As commit d2e668e in 1.2.5, internal active snapshot
# without memory state is rejected. Handle it as SKIP
# for now. This could be supportted in future by bug:
# https://bugzilla.redhat.com/show_bug.cgi?id=1103063
if re.search(
"internal snapshot of a running VM" +
" must include the memory state", out_err):
raise error.TestNAError("Check Bug #1083345, %s" %
out_err)
raise error.TestFail(
"Failed to create snapshot. Error:%s." % out_err)
else:
snapshot_result = virsh.snapshot_create(vm_name, options)
if snapshot_result.exit_status:
if status_error:
return
else:
raise error.TestFail(
"Failed to create snapshot. Error:%s." %
snapshot_result.stderr.strip())
snapshot_name = re.search("\d+",
snapshot_result.stdout.strip()).group(0)
if snapshot_current:
lines = [
"<domainsnapshot>\n",
"<description>Snapshot Test</description>\n",
"<state>running</state>\n",
"<creationTime>%s</creationTime>" % snapshot_name,
"</domainsnapshot>"
]
snapshot_xml_path = "%s/snapshot_xml" % tmp_dir
snapshot_xml_file = open(snapshot_xml_path, "w")
snapshot_xml_file.writelines(lines)
snapshot_xml_file.close()
logging.debug("The xml content for snapshot create is:")
with open(snapshot_xml_path, 'r') as fin:
logging.debug(fin.read())
options += "--redefine %s --current" % snapshot_xml_path
if snapshot_result.exit_status:
raise error.TestFail("Failed to create snapshot --current."
"Error:%s." %
snapshot_result.stderr.strip())
if status_error:
if not snapshot_del_test:
raise error.TestFail("Success to create snapshot in negative"
" case\nDetail: %s" % snapshot_result)
# Touch a file in VM.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
# Init a unique name for tmp_file.
tmp_file = tempfile.NamedTemporaryFile(prefix=("snapshot_test_"),
dir="/tmp")
tmp_file_path = tmp_file.name
tmp_file.close()
echo_cmd = "echo SNAPSHOT_DISK_TEST >> %s" % tmp_file_path
status, output = session.cmd_status_output(echo_cmd)
logging.debug("The echo output in domain is: '%s'", output)
if status:
raise error.TestFail("'%s' run failed with '%s'" %
(tmp_file_path, output))
status, output = session.cmd_status_output("cat %s" % tmp_file_path)
logging.debug("File created with content: '%s'", output)
session.close()
# Destroy vm for snapshot revert.
if not libvirt_version.version_compare(1, 2, 3):
virsh.destroy(vm_name)
# Revert snapshot.
revert_options = ""
if snapshot_revert_paused:
revert_options += " --paused"
revert_result = virsh.snapshot_revert(vm_name,
snapshot_name,
revert_options,
debug=True)
if revert_result.exit_status:
# As commit d410e6f for libvirt 1.2.3, attempts to revert external
# snapshots will FAIL with an error "revert to external snapshot
# not supported yet". Thus, let's check for that and handle as a
# SKIP for now. Check bug:
# https://bugzilla.redhat.com/show_bug.cgi?id=1071264
if libvirt_version.version_compare(1, 2, 3):
if re.search("revert to external snapshot not supported yet",
revert_result.stderr):
raise error.TestNAError(revert_result.stderr.strip())
else:
raise error.TestFail("Revert snapshot failed. %s" %
revert_result.stderr.strip())
if vm.is_dead():
raise error.TestFail("Revert snapshot failed.")
if snapshot_revert_paused:
if vm.is_paused():
vm.resume()
else:
raise error.TestFail("Revert command successed, but VM is not "
"paused after reverting with --paused"
" option.")
# login vm.
session = vm.wait_for_login()
# Check the result of revert.
status, output = session.cmd_status_output("cat %s" % tmp_file_path)
logging.debug("After revert cat file output='%s'", output)
if not status:
raise error.TestFail("Tmp file exists, revert failed.")
# Close the session.
session.close()
# Test delete snapshot without "--metadata", delete external disk
# snapshot will fail for now.
# Only do this when snapshot creat succeed which filtered in cfg file.
if snapshot_del_test:
if snapshot_name:
del_result = virsh.snapshot_delete(vm_name,
snapshot_name,
debug=True,
ignore_status=True)
del_status = del_result.exit_status
snap_xml_path = snap_cfg_path + "%s.xml" % snapshot_name
if del_status:
if not status_error:
raise error.TestFail("Failed to delete snapshot.")
else:
if not os.path.exists(snap_xml_path):
raise error.TestFail(
"Snapshot xml file %s missing" % snap_xml_path)
else:
if status_error:
err_msg = "Snapshot delete succeed but expect fail."
raise error.TestFail(err_msg)
else:
if os.path.exists(snap_xml_path):
raise error.TestFail("Snapshot xml file %s still" %
snap_xml_path + " exist")
finally:
virsh.detach_disk(vm_name, target="vdf", extra="--persistent")
if image:
image.remove()
if del_status and snapshot_name:
virsh.snapshot_delete(vm_name, snapshot_name, "--metadata")
for disk in snapshot_external_disk:
if os.path.exists(disk):
os.remove(disk)
vmxml_backup.sync("--snapshots-metadata")
if snapshot_xml_path:
if os.path.exists(snapshot_xml_path):
os.unlink(snapshot_xml_path)
if pvt:
try:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
except error.TestFail, detail:
logging.error(str(detail))
def run(test, params, env):
"""
This test cover two volume commands: vol-clone and vol-wipe.
1. Create a given type pool.
2. Create a given format volume in the pool.
3. Clone the new create volume.
4. Wipe the new clone volume.
5. Delete the volume and pool.
"""
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
if not os.path.dirname(pool_target):
pool_target = os.path.join(test.tmpdir, pool_target)
emulated_image = params.get("emulated_image")
emulated_image_size = params.get("emulated_image_size")
vol_name = params.get("vol_name")
new_vol_name = params.get("new_vol_name")
vol_capability = params.get("vol_capability")
vol_format = params.get("vol_format")
clone_option = params.get("clone_option", "")
wipe_algorithms = params.get("wipe_algorithms")
if virsh.has_command_help_match("vol-wipe", "--prealloc-metadata") is None:
if "prealloc-metadata" in clone_option:
raise error.TestNAError("Option --prealloc-metadata "
"is not supported.")
# Using algorithms other than zero need scrub installed.
try:
utils_misc.find_command('scrub')
except ValueError:
logging.warning("Can't locate scrub binary, only 'zero' algorithm "
"is used.")
valid_algorithms = ["zero"]
else:
valid_algorithms = [
"zero", "nnsa", "dod", "bsi", "gutmann", "schneier", "pfitzner7",
"pfitzner33", "random"
]
# Choose an algorithms randomly
if wipe_algorithms:
alg = random.choice(wipe_algorithms.split())
else:
alg = random.choice(valid_algorithms)
clone_status_error = "yes" == params.get("clone_status_error", "no")
wipe_status_error = "yes" == params.get("wipe_status_error", "no")
setup_libvirt_polkit = "yes" == params.get("setup_libvirt_polkit")
# libvirt acl polkit related params
uri = params.get("virsh_uri")
unpri_user = params.get('unprivileged_user')
if unpri_user:
if unpri_user.count('EXAMPLE'):
unpri_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if setup_libvirt_polkit:
raise error.TestNAError("API acl test not supported in current"
" libvirt version.")
del_pool = True
libv_pvt = libvirt.PoolVolumeTest(test, params)
try:
libv_pool = libvirt_storage.StoragePool()
while libv_pool.pool_exists(pool_name):
logging.debug("Use exist pool '%s'", pool_name)
del_pool = False
else:
# Create a new pool
disk_vol = []
if pool_type == 'disk':
disk_vol.append(params.get("pre_vol", '10M'))
libv_pvt.pre_pool(pool_name=pool_name,
pool_type=pool_type,
pool_target=pool_target,
emulated_image=emulated_image,
image_size=emulated_image_size,
pre_disk_vol=disk_vol)
libv_vol = libvirt_storage.PoolVolume(pool_name)
if libv_vol.volume_exists(vol_name):
logging.debug("Use exist volume '%s'", vol_name)
elif vol_format in ['raw', 'qcow2', 'qed', 'vmdk']:
# Create a new volume
libv_pvt.pre_vol(vol_name=vol_name,
vol_format=vol_format,
capacity=vol_capability,
allocation=None,
pool_name=pool_name)
elif vol_format == 'partition':
vol_name = libv_vol.list_volumes().keys()[0]
logging.debug("Partition %s in disk pool is volume" % vol_name)
elif vol_format == 'sparse':
# Create a sparse file in pool
sparse_file = pool_target + '/' + vol_name
cmd = "dd if=/dev/zero of=" + sparse_file
cmd += " bs=1 count=0 seek=" + vol_capability
utils.run(cmd)
else:
raise error.TestError("Unknown volume format %s" % vol_format)
# Refresh the pool
virsh.pool_refresh(pool_name)
vol_info = libv_vol.volume_info(vol_name)
for key in vol_info:
logging.debug("Original volume info: %s = %s", key, vol_info[key])
# Metadata preallocation is not support for block volume
if vol_info["Type"] == "block" and clone_option.count(
"prealloc-metadata"):
clone_status_error = True
if pool_type == "disk":
new_vol_name = libvirt.new_disk_vol_name(pool_name)
if new_vol_name is None:
raise error.TestError("Fail to generate volume name")
# update polkit rule as the volume name changed
if setup_libvirt_polkit:
vol_pat = r"lookup\('vol_name'\) == ('\S+')"
new_value = "lookup('vol_name') == '%s'" % new_vol_name
libvirt.update_polkit_rule(params, vol_pat, new_value)
# Clone volume
clone_result = virsh.vol_clone(vol_name,
new_vol_name,
pool_name,
clone_option,
debug=True)
if not clone_status_error:
if clone_result.exit_status != 0:
raise error.TestFail("Clone volume fail:\n%s" %
clone_result.stderr.strip())
else:
vol_info = libv_vol.volume_info(new_vol_name)
for key in vol_info:
logging.debug("Cloned volume info: %s = %s", key,
vol_info[key])
logging.debug("Clone volume successfully.")
# Wipe the new clone volume
if alg:
logging.debug("Wiping volume by '%s' algorithm", alg)
wipe_result = virsh.vol_wipe(new_vol_name,
pool_name,
alg,
unprivileged_user=unpri_user,
uri=uri,
debug=True)
unsupported_err = [
"Unsupported algorithm", "no such pattern sequence"
]
if not wipe_status_error:
if wipe_result.exit_status != 0:
if any(err in wipe_result.stderr
for err in unsupported_err):
raise error.TestNAError(wipe_result.stderr)
raise error.TestFail("Wipe volume fail:\n%s" %
clone_result.stdout.strip())
else:
virsh_vol_info = libv_vol.volume_info(new_vol_name)
for key in virsh_vol_info:
logging.debug("Wiped volume info(virsh): %s = %s",
key, virsh_vol_info[key])
vol_path = virsh.vol_path(new_vol_name,
pool_name).stdout.strip()
qemu_vol_info = utils_misc.get_image_info(vol_path)
for key in qemu_vol_info:
logging.debug("Wiped volume info(qemu): %s = %s",
key, qemu_vol_info[key])
if qemu_vol_info['format'] != 'raw':
raise error.TestFail("Expect wiped volume "
"format is raw")
elif wipe_status_error and wipe_result.exit_status == 0:
raise error.TestFail("Expect wipe volume fail, but run"
" successfully.")
elif clone_status_error and clone_result.exit_status == 0:
raise error.TestFail("Expect clone volume fail, but run"
" successfully.")
finally:
# Clean up
try:
if del_pool:
libv_pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
else:
# Only delete the volumes
libv_vol = libvirt_storage.PoolVolume(pool_name)
for vol in [vol_name, new_vol_name]:
libv_vol.delete_volume(vol)
except error.TestFail, detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh vol-create-from command to cover the following matrix:
pool = [source, destination]
pool_type = [dir, disk, fs, logical, netfs, iscsi, scsi]
volume_format = [raw, qcow2, qed]
Note, both 'iscsi' and 'scsi' type pools don't support create volume by
virsh, so which can't be destination pools. And for disk pool, it can't
create volume with specified format.
"""
src_pool_type = params.get("src_pool_type")
src_pool_target = params.get("src_pool_target")
src_emulated_image = params.get("src_emulated_image")
src_vol_format = params.get("src_vol_format")
dest_pool_type = params.get("dest_pool_type")
dest_pool_target = params.get("dest_pool_target")
dest_emulated_image = params.get("dest_emulated_image")
dest_vol_format = params.get("dest_vol_format")
prealloc_option = params.get("prealloc_option")
status_error = params.get("status_error", "no")
try:
# Create the src/dest pool
src_pool_name = "virt-%s-pool" % src_pool_type
dest_pool_name = "virt-%s-pool" % dest_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name,
src_pool_type,
src_pool_target,
src_emulated_image,
image_size="40M",
pre_disk_vol=["1M"])
if src_pool_type != dest_pool_type:
pvt.pre_pool(dest_pool_name,
dest_pool_type,
dest_pool_target,
dest_emulated_image,
image_size="50M",
pre_disk_vol=["1M"])
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create the src vol
vol_size = "1048576"
if src_pool_type in ["dir", "logical", "netfs", "fs"]:
src_vol_name = "src_vol"
pvt.pre_vol(vol_name=src_vol_name,
vol_format=src_vol_format,
capacity=vol_size,
allocation=None,
pool_name=src_pool_name)
else:
src_pv = libvirt_storage.PoolVolume(src_pool_name)
src_vols = src_pv.list_volumes().keys()
if src_vols:
src_vol_name = src_vols[0]
else:
raise error.TestFail("No volume in pool: %s", src_pool_name)
# Prepare vol xml file
dest_vol_name = "dest_vol"
if dest_pool_type == "disk":
dest_vol_format = ""
prealloc_option = ""
vol_xml = """
<volume>
<name>%s</name>
<capacity unit='bytes'>%s</capacity>
<target>
<format type='%s'/>
</target>
</volume>
""" % (dest_vol_name, vol_size, dest_vol_format)
logging.debug("Prepare the volume xml: %s", vol_xml)
vol_file = os.path.join(test.tmpdir, "dest_vol.xml")
xml_object = open(vol_file, 'w')
xml_object.write(vol_xml)
xml_object.close()
# iSCSI and SCSI type pool can't create vols via virsh
if dest_pool_type in ["iscsi", "scsi"]:
raise error.TestFail("Unsupport create vol for %s type pool",
dest_pool_type)
# Metadata preallocation is not supported for block volumes
if dest_pool_type in ["disk", "logical"]:
prealloc_option = ""
# Run run_virsh_vol_create_from to create dest vol
cmd_result = virsh.vol_create_from(dest_pool_name,
vol_file,
src_vol_name,
src_pool_name,
prealloc_option,
ignore_status=True,
debug=True)
status = cmd_result.exit_status
# Check result
if status_error == "no":
if status == 0:
dest_pv = libvirt_storage.PoolVolume(dest_pool_name)
dest_volumes = dest_pv.list_volumes().keys()
logging.debug("Current volumes in %s: %s", dest_pool_name,
dest_volumes)
if dest_vol_name not in dest_volumes:
raise error.TestFail("Can't find volume: % from pool: %s",
dest_vol_name, dest_pool_name)
else:
raise error.TestFail(cmd_result.stderr)
else:
if status:
logging.debug("Expect error: %s", cmd_result.stderr)
else:
raise error.TestFail("Expect fail, but run successfully!")
finally:
# Cleanup: both src and dest should be removed
try:
pvt.cleanup_pool(src_pool_name, src_pool_type, src_pool_target,
src_emulated_image)
except error.TestFail, detail:
logging.error(str(detail))
if src_pool_type != dest_pool_type:
pvt.cleanup_pool(dest_pool_name, dest_pool_type, dest_pool_target,
dest_emulated_image)
if os.path.isfile(vol_file):
os.remove(vol_file)
def run(test, params, env):
"""
Test svirt in adding disk to VM.
(1).Init variables for test.
(2).Create a image to attached to VM.
(3).Attach disk.
(4).Start VM and check result.
"""
# Get general variables.
status_error = ('yes' == params.get("status_error", 'no'))
host_sestatus = params.get("svirt_attach_disk_host_selinux", "enforcing")
# Get variables about seclabel for VM.
sec_type = params.get("svirt_attach_disk_vm_sec_type", "dynamic")
sec_model = params.get("svirt_attach_disk_vm_sec_model", "selinux")
sec_label = params.get("svirt_attach_disk_vm_sec_label", None)
sec_relabel = params.get("svirt_attach_disk_vm_sec_relabel", "yes")
sec_dict = {
'type': sec_type,
'model': sec_model,
'label': sec_label,
'relabel': sec_relabel
}
disk_seclabel = params.get("disk_seclabel", "no")
# Get variables about pool vol
with_pool_vol = 'yes' == params.get("with_pool_vol", "no")
check_cap_rawio = "yes" == params.get("check_cap_rawio", "no")
virt_use_nfs = params.get("virt_use_nfs", "off")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image")
vol_name = params.get("vol_name")
vol_format = params.get("vol_format", "qcow2")
device_target = params.get("disk_target")
device_bus = params.get("disk_target_bus")
device_type = params.get("device_type", "file")
# Get variables about VM and get a VM object and VMXML instance.
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
vmxml = VMXML.new_from_inactive_dumpxml(vm_name)
backup_xml = vmxml.copy()
# Get varialbles about image.
img_label = params.get('svirt_attach_disk_disk_label')
sec_disk_dict = {
'model': sec_model,
'label': img_label,
'relabel': sec_relabel
}
enable_namespace = 'yes' == params.get('enable_namespace', 'no')
img_name = "svirt_disk"
# Default label for the other disks.
# To ensure VM is able to access other disks.
default_label = params.get('svirt_attach_disk_disk_default_label', None)
# Set selinux of host.
backup_sestatus = utils_selinux.get_status()
utils_selinux.set_status(host_sestatus)
# Set the default label to other disks of vm.
disks = vm.get_disk_devices()
for disk in list(disks.values()):
utils_selinux.set_context_of_file(filename=disk['source'],
context=default_label)
pvt = None
qemu_conf = utils_config.LibvirtQemuConfig()
libvirtd = utils_libvirtd.Libvirtd()
disk_xml = Disk(type_name=device_type)
disk_xml.device = "disk"
try:
# set qemu conf
if check_cap_rawio:
qemu_conf.user = '******'
qemu_conf.group = 'root'
logging.debug("the qemu.conf content is: %s" % qemu_conf)
libvirtd.restart()
if with_pool_vol:
# Create dst pool for create attach vol img
pvt = utlv.PoolVolumeTest(test, params)
logging.debug("pool_type %s" % pool_type)
pvt.pre_pool(pool_name,
pool_type,
pool_target,
emulated_image,
image_size="1G",
pre_disk_vol=["20M"])
if pool_type in ["iscsi", "disk"]:
# iscsi and disk pool did not support create volume in libvirt,
# logical pool could use libvirt to create volume but volume
# format is not supported and will be 'raw' as default.
pv = libvirt_storage.PoolVolume(pool_name)
vols = list(pv.list_volumes().keys())
vol_format = "raw"
if vols:
vol_name = vols[0]
else:
test.cancel("No volume in pool: %s" % pool_name)
else:
vol_arg = {
'name': vol_name,
'format': vol_format,
'capacity': 1073741824,
'allocation': 1048576,
}
# Set volume xml file
volxml = libvirt_xml.VolXML()
newvol = volxml.new_vol(**vol_arg)
vol_xml = newvol['xml']
# Run virsh_vol_create to create vol
logging.debug("create volume from xml: %s" %
newvol.xmltreefile)
cmd_result = virsh.vol_create(pool_name,
vol_xml,
ignore_status=True,
debug=True)
if cmd_result.exit_status:
test.cancel("Failed to create attach volume.")
cmd_result = virsh.vol_path(vol_name, pool_name, debug=True)
if cmd_result.exit_status:
test.cancel("Failed to get volume path from pool.")
img_path = cmd_result.stdout.strip()
if pool_type in ["iscsi", "disk"]:
source_type = "dev"
if pool_type == "iscsi":
disk_xml.device = "lun"
disk_xml.rawio = "yes"
else:
if not enable_namespace:
qemu_conf.namespaces = ''
logging.debug("the qemu.conf content is: %s" %
qemu_conf)
libvirtd.restart()
else:
source_type = "file"
# set host_sestatus as nfs pool will reset it
utils_selinux.set_status(host_sestatus)
# set virt_use_nfs
result = process.run("setsebool virt_use_nfs %s" % virt_use_nfs,
shell=True)
if result.exit_status:
test.cancel("Failed to set virt_use_nfs value")
else:
source_type = "file"
# Init a QemuImg instance.
params['image_name'] = img_name
tmp_dir = data_dir.get_tmp_dir()
image = qemu_storage.QemuImg(params, tmp_dir, img_name)
# Create a image.
img_path, result = image.create(params)
# Set the context of the image.
if sec_relabel == "no":
utils_selinux.set_context_of_file(filename=img_path,
context=img_label)
disk_xml.target = {"dev": device_target, "bus": device_bus}
disk_xml.driver = {"name": "qemu", "type": vol_format}
if disk_seclabel == "yes":
source_seclabel = []
sec_xml = seclabel.Seclabel()
sec_xml.update(sec_disk_dict)
source_seclabel.append(sec_xml)
disk_source = disk_xml.new_disk_source(**{
"attrs": {
source_type: img_path
},
"seclabels": source_seclabel
})
else:
disk_source = disk_xml.new_disk_source(
**{"attrs": {
source_type: img_path
}})
# Set the context of the VM.
vmxml.set_seclabel([sec_dict])
vmxml.sync()
disk_xml.source = disk_source
logging.debug(disk_xml)
# Do the attach action.
cmd_result = virsh.attach_device(domainarg=vm_name,
filearg=disk_xml.xml,
flagstr='--persistent')
libvirt.check_exit_status(cmd_result, expect_error=False)
logging.debug("the domain xml is: %s" % vmxml.xmltreefile)
# Start VM to check the VM is able to access the image or not.
try:
vm.start()
# Start VM successfully.
# VM with set seclabel can access the image with the
# set context.
if status_error:
test.fail('Test succeeded in negative case.')
if check_cap_rawio:
cap_list = ['CapPrm', 'CapEff', 'CapBnd']
cap_dict = {}
pid = vm.get_pid()
pid_status_path = "/proc/%s/status" % pid
with open(pid_status_path) as f:
for line in f:
val_list = line.split(":")
if val_list[0] in cap_list:
cap_dict[val_list[0]] = int(
val_list[1].strip(), 16)
# bit and with rawio capabilitiy value to check cap_sys_rawio
# is set
cap_rawio_val = 0x0000000000020000
for i in cap_list:
if not cap_rawio_val & cap_dict[i]:
err_msg = "vm process with %s: 0x%x" % (i, cap_dict[i])
err_msg += " lack cap_sys_rawio capabilities"
test.fail(err_msg)
else:
inf_msg = "vm process with %s: 0x%x" % (i, cap_dict[i])
inf_msg += " have cap_sys_rawio capabilities"
logging.debug(inf_msg)
if pool_type == "disk":
if libvirt_version.version_compare(3, 1,
0) and enable_namespace:
vm_pid = vm.get_pid()
output = process.system_output(
"nsenter -t %d -m -- ls -Z %s" % (vm_pid, img_path))
else:
output = process.system_output('ls -Z %s' % img_path)
logging.debug("The default label is %s", default_label)
logging.debug("The label after guest started is %s",
to_text(output.strip().split()[-2]))
if default_label not in to_text(output.strip().split()[-2]):
test.fail("The label is wrong after guest started\n")
except virt_vm.VMStartError as e:
# Starting VM failed.
# VM with set seclabel can not access the image with the
# set context.
if not status_error:
test.fail("Test failed in positive case." "error: %s" % e)
cmd_result = virsh.detach_device(domainarg=vm_name,
filearg=disk_xml.xml)
libvirt.check_exit_status(cmd_result, status_error)
finally:
# clean up
vm.destroy()
if not with_pool_vol:
image.remove()
if pvt:
try:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
except exceptions.TestFail as detail:
logging.error(str(detail))
backup_xml.sync()
utils_selinux.set_status(backup_sestatus)
if check_cap_rawio:
qemu_conf.restore()
libvirtd.restart()
def run(test, params, env):
"""
Test command: virsh vol-resize
Resize the capacity of the given volume (default bytes).
1. Define and start a given type pool.
2. Create a volume in the pool.
3. Do vol-resize.
4. Check the volume info.
5. Delete the volume and pool.
TODO:
Add volume shrink test after libvirt uptream support it.
"""
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
emulated_image = params.get("emulated_image")
emulated_image_size = params.get("emulated_image_size")
vol_name = params.get("vol_name")
vol_format = params.get("vol_format")
vol_capacity = params.get("vol_capacity")
vol_new_capacity = params.get("vol_new_capacity")
resize_option = params.get("resize_option", "")
check_vol_size = "yes" == params.get("check_vol_size", "yes")
status_error = "yes" == params.get("status_error", "no")
b_luks_encrypt = "luks" == params.get("encryption_method")
encryption_password = params.get("encryption_password", "redhat")
secret_uuids = []
if not libvirt_version.version_compare(1, 0, 0):
if "--allocate" in resize_option:
test.cancel("'--allocate' flag is not supported in"
" current libvirt version.")
# libvirt acl polkit related params
uri = params.get("virsh_uri")
unpri_user = params.get('unprivileged_user')
if unpri_user:
if unpri_user.count('EXAMPLE'):
unpri_user = '******'
if not libvirt_version.version_compare(1, 1, 1):
if params.get('setup_libvirt_polkit') == 'yes':
test.cancel("API acl test not supported in current"
" libvirt version.")
libv_pvt = libvirt.PoolVolumeTest(test, params)
try:
libv_pool = libvirt_storage.StoragePool()
# Raise error if given name pool already exist
if libv_pool.pool_exists(pool_name):
test.error("Pool '%s' already exist", pool_name)
else:
# Create a new pool
libv_pvt.pre_pool(pool_name,
pool_type,
pool_target,
emulated_image,
image_size=emulated_image_size)
pool_info = libv_pool.pool_info(pool_name)
for key in pool_info:
logging.debug("Pool info: %s = %s", key, pool_info[key])
# Deal with vol_new_capacity, '--capacity' only accpet integer
if vol_new_capacity == "pool_available":
pool_avai = pool_info["Available"].split()
vol_new_capacity = pool_avai[0].split('.')[0] + pool_avai[1]
if vol_new_capacity == "pool_capacity":
pool_capa = pool_info["Capacity"].split()
vol_new_capacity = pool_capa[0].split('.')[0] + pool_capa[1]
# Create a volume
if b_luks_encrypt:
luks_sec_uuid = create_luks_secret(
os.path.join(pool_target, vol_name), test)
secret_uuids.append(luks_sec_uuid)
set_secret_value(encryption_password, luks_sec_uuid)
create_luks_vol(vol_name, luks_sec_uuid, params, test)
else:
libv_pvt.pre_vol(vol_name=vol_name,
vol_format=vol_format,
capacity=vol_capacity,
allocation=None,
pool_name=pool_name)
libv_vol = libvirt_storage.PoolVolume(pool_name)
check_vol_info(libv_vol, vol_name, test)
# The volume size may not accurate as we expect after resize, such as:
# 1) vol_new_capacity = 1b with --delta option, the volume size will not
# change; run
# 2) vol_new_capacity = 1KB with --delta option, the volume size will
# increase 1024 not 1000
# So we can disable volume size check after resize
if check_vol_size:
vol_path = libv_vol.list_volumes()[vol_name]
expect_info = get_expect_info(vol_new_capacity, vol_path, test,
resize_option)
logging.debug("Expect volume info: %s", expect_info)
else:
expect_info = {}
# Run vol-resize
result = virsh.vol_resize(vol_name,
vol_new_capacity,
pool_name,
resize_option,
uri=uri,
unprivileged_user=unpri_user,
debug=True)
if not status_error:
if result.exit_status != 0:
test.fail(result.stdout.strip() + result.stderr.strip())
else:
if check_vol_info(libv_vol, vol_name, test, expect_info):
logging.debug("Volume %s resize check pass.", vol_name)
else:
test.fail("Volume %s resize check fail." % vol_name)
elif result.exit_status == 0:
test.fail("Expect resize fail but run successfully.")
finally:
# Clean up
try:
libv_pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image)
for secret_uuid in set(secret_uuids):
virsh.secret_undefine(secret_uuid)
except exceptions.TestFail as detail:
logging.error(str(detail))
def run(test, params, env):
"""
Test virsh vol-create-from command to cover the following matrix:
pool = [source, destination]
pool_type = [dir, disk, fs, logical, netfs, iscsi, scsi]
volume_format = [raw, qcow2, qed]
Note, both 'iscsi' and 'scsi' type pools don't support create volume by
virsh, so which can't be destination pools. And for disk pool, it can't
create volume with specified format.
"""
src_pool_type = params.get("src_pool_type")
src_pool_target = params.get("src_pool_target")
src_emulated_image = params.get("src_emulated_image")
src_vol_format = params.get("src_vol_format")
dest_pool_type = params.get("dest_pool_type")
dest_pool_target = params.get("dest_pool_target")
dest_emulated_image = params.get("dest_emulated_image")
dest_vol_format = params.get("dest_vol_format")
prealloc_option = params.get("prealloc_option")
status_error = params.get("status_error", "no")
if not libvirt_version.version_compare(1, 0, 0):
if "--prealloc-metadata" in prealloc_option:
test.cancel("metadata preallocation not supported in"
" current libvirt version.")
vol_file = ""
try:
# Create the src/dest pool
src_pool_name = "virt-%s-pool" % src_pool_type
dest_pool_name = "virt-%s-pool" % dest_pool_type
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(src_pool_name,
src_pool_type,
src_pool_target,
src_emulated_image,
image_size="40M",
pre_disk_vol=["1M"])
if src_pool_type != dest_pool_type:
pvt.pre_pool(dest_pool_name,
dest_pool_type,
dest_pool_target,
dest_emulated_image,
image_size="100M",
pre_disk_vol=["1M"])
# Print current pools for debugging
logging.debug("Current pools:%s",
libvirt_storage.StoragePool().list_pools())
# Create the src vol
# 8M is the minimal size for logical volume(PPC)
# 4M is the minimal size for logical volume(x86)
vol_size = params.get("image_volume_size", "16777216")
if src_pool_type in ["dir", "logical", "netfs", "fs"]:
src_vol_name = "src_vol"
pvt.pre_vol(vol_name=src_vol_name,
vol_format=src_vol_format,
capacity=vol_size,
allocation=None,
pool_name=src_pool_name)
else:
src_vol_name = list(utlv.get_vol_list(src_pool_name).keys())[0]
# Prepare vol xml file
dest_vol_name = "dest_vol"
# According to BZ#1138523, we need inpect the right name
# (disk partition) for new volume
if dest_pool_type == "disk":
dest_vol_name = utlv.new_disk_vol_name(dest_pool_name)
if dest_vol_name is None:
test.error("Fail to generate volume name")
if dest_pool_type == "disk":
dest_vol_format = ""
prealloc_option = ""
vol_xml = """
<volume>
<name>%s</name>
<capacity unit='bytes'>%s</capacity>
<target>
<format type='%s'/>
</target>
</volume>
""" % (dest_vol_name, vol_size, dest_vol_format)
logging.debug("Prepare the volume xml: %s", vol_xml)
vol_file = os.path.join(test.tmpdir, "dest_vol.xml")
with open(vol_file, 'w') as xml_object:
xml_object.write(vol_xml)
# iSCSI and SCSI type pool can't create vols via virsh
if dest_pool_type in ["iscsi", "scsi"]:
test.fail("Unsupport create vol for %s type pool" % dest_pool_type)
# Metadata preallocation is not supported for block volumes
if dest_pool_type in ["disk", "logical"]:
prealloc_option = ""
# Run run_virsh_vol_create_from to create dest vol
cmd_result = virsh.vol_create_from(dest_pool_name,
vol_file,
src_vol_name,
src_pool_name,
prealloc_option,
ignore_status=True,
debug=True)
status = cmd_result.exit_status
# Check result
if status_error == "no":
if status == 0:
dest_pv = libvirt_storage.PoolVolume(dest_pool_name)
dest_volumes = list(dest_pv.list_volumes().keys())
logging.debug("Current volumes in %s: %s", dest_pool_name,
dest_volumes)
if dest_vol_name not in dest_volumes:
test.fail("Can't find volume: % from pool: %s" %
(dest_vol_name, dest_pool_name))
else:
test.fail(cmd_result.stderr)
else:
if status:
logging.debug("Expect error: %s", cmd_result.stderr)
else:
test.fail("Expect fail, but run successfully!")
finally:
# Cleanup: both src and dest should be removed
try:
pvt.cleanup_pool(src_pool_name, src_pool_type, src_pool_target,
src_emulated_image)
except exceptions.TestFail as detail:
logging.error(str(detail))
if src_pool_type != dest_pool_type:
pvt.cleanup_pool(dest_pool_name, dest_pool_type, dest_pool_target,
dest_emulated_image)
if os.path.isfile(vol_file):
os.remove(vol_file)
def run(test, params, env):
"""
Test storage pool and volumes with applications such as:
install vms, attached to vms...
"""
pool_type = params.get("pool_type")
pool_name = "test_%s_app" % pool_type
pool_target = params.get("pool_target")
emulated_img = params.get("emulated_img", "emulated_img")
volume_count = int(params.get("volume_count", 1))
volume_size = params.get("volume_size", "1G")
emulated_size = "%sG" % (volume_count * int(volume_size[:-1]) + 1)
application = params.get("application", "install")
disk_target = params.get("disk_target", "vdb")
test_message = params.get("test_message", "")
vm_name = params.get("main_vm", "virt-tests-vm1")
if application == "install":
vm_name = params.get("vm_name", "vm1")
try:
pvtest = utlv.PoolVolumeTest(test, params)
pvtest.pre_pool(pool_name, pool_type, pool_target, emulated_img,
emulated_size)
logging.debug("Current pools:\n%s",
libvirt_storage.StoragePool().list_pools())
new_pool = libvirt_storage.PoolVolume(pool_name)
volumes = create_volumes(new_pool, volume_count, volume_size)
if application == "attach":
vm = env.get_vm(vm_name)
session = vm.wait_for_login()
# The attach-disk action based on running guest,
# so no need to recover the guest, it will be
# recovered automatically after shutdown/reboot
virsh.attach_disk(vm_name,
volumes.values()[volume_count - 1], disk_target)
vm_attach_device = "/dev/%s" % disk_target
# Test if attached disk can be used normally
utlv.mk_part(vm_attach_device, session=session)
session.cmd("mkfs.ext4 %s1" % vm_attach_device)
session.cmd("mount %s1 /mnt" % vm_attach_device)
session.cmd("echo %s > /mnt/test" % test_message)
output = session.cmd_output("cat /mnt/test").strip()
if output != test_message:
raise error.TestFail("%s cannot be used normally!" %
vm_attach_device)
elif application == "install":
# Get a nonexist domain name
while virsh.domain_exists(vm_name):
vm_name += "_test"
params["image_name"] = volumes.values()[volume_count - 1]
params["image_format"] = "raw"
try:
unattended_install.run(test, params, env)
except error.CmdError, detail:
raise error.TestFail("Guest install failed:%s" % detail)
finally:
try:
if application == "install":
if virsh.domain_exists(vm_name):
virsh.remove_domain(vm_name)
finally:
pvtest.cleanup_pool(pool_name, pool_type, pool_target,
emulated_img)