def GetvtkScalars(self):
"""Returns the instance of vtkScalars"""
from vtk import vtkPointData
try:
return self.vtkscalars
except AttributeError:
self.vtkscalars = vtkPointData()
return self.vtkscalars
def __init__(self, data):
if data is not None:
if len(data) > 0:
self._data = data
self._mu_coefs = set(self._data[:, 1])
else:
self._data = None
self._mu_coefs = None
if self._data is not None:
self._time = min(self._data[:, 0])
else:
self._time = 0
self._output = vtk.vtkPolyData()
self._contact_field = vtk.vtkPointData()
def vtk_point_data1():
result = vtk.vtkPointData()
result._scalars = np.arange(3)
scalars = ns.numpy_to_vtk(result._scalars)
result.SetScalars(scalars)
result._vectors = np.arange(3, 6)
vectors = ns.numpy_to_vtk(result._vectors )
result.SetVectors(vectors)
result._normals = np.arange(6, 9)
normals = ns.numpy_to_vtk(result._normals )
result.SetNormals(normals)
result._tensors = np.arange(9, 12)
tensors = ns.numpy_to_vtk(result._tensors)
result.SetTensors(tensors)
return result
def __init__(self, data):
self._data = None
self._datap = numpy.array([[
1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14.,
15.
]])
self._mu_coefs = []
if data is not None:
if len(data) > 0:
self._data = data
self._mu_coefs = set(self._data[:, 1])
else:
self._data = None
self._mu_coefs = []
if self._data is not None:
self._time = min(self._data[:, 0])
else:
self._time = 0
self.cpa_at_time = dict()
self.cpa = dict()
self.cpb_at_time = dict()
self.cpb = dict()
self.cf_at_time = dict()
self.cf = dict()
self.cn_at_time = dict()
self.cn = dict()
self._contact_field = dict()
self._output = dict()
for mu in self._mu_coefs:
self._contact_field[mu] = vtk.vtkPointData()
self._output[mu] = vtk.vtkPolyData()
self._output[mu].SetFieldData(self._contact_field[mu])
def method(self):
global keeper
# ind0 = bisect.bisect_left(self._data[:, 0], self._time)
self._contact_field = vtk.vtkPointData()
self._output.SetFieldData(self._contact_field)
if self._data is not None:
id_f = numpy.where(abs(self._data[:, 0] - self._time) < 1e-15)[0]
if len(id_f) == 0:
return
self.cpa_at_time = self._data[id_f, 2:5].copy()
self.cpa = numpy_support.numpy_to_vtk(self.cpa_at_time)
self.cpa.SetName('contactPositionsA')
self.cpb_at_time = self._data[id_f, 5:8].copy()
self.cpb = numpy_support.numpy_to_vtk(self.cpb_at_time)
self.cpb.SetName('contactPositionsB')
self.cn_at_time = -self._data[id_f, 8:11].copy()
self.cn = numpy_support.numpy_to_vtk(self.cn_at_time)
self.cn.SetName('contactNormals')
self.cf_at_time = self._data[id_f, 11:14].copy()
self.cf = numpy_support.numpy_to_vtk(self.cf_at_time)
self.cf.SetName('contactForces')
self._contact_field.AddArray(self.cpa)
self._contact_field.AddArray(self.cpb)
self._contact_field.AddArray(self.cn)
self._contact_field.AddArray(self.cf)
else:
pass
self._output.Update()
def __init__(self, data):
self._data = None
self._datap = numpy.array(
[[1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15.]])
self._mu_coefs = []
if data is not None:
if len(data) > 0:
self._data = data
self._mu_coefs = set(self._data[:, 1])
else:
self._data = None
self._mu_coefs = []
if self._data is not None:
self._time = min(self._data[:, 0])
else:
self._time = 0
self.cpa_at_time = dict()
self.cpa = dict()
self.cpb_at_time = dict()
self.cpb = dict()
self.cf_at_time = dict()
self.cf = dict()
self.cn_at_time = dict()
self.cn = dict()
self._contact_field = dict()
self._output = dict()
for mu in self._mu_coefs:
self._contact_field[mu] = vtk.vtkPointData()
self._output[mu] = vtk.vtkPolyData()
self._output[mu].SetFieldData(self._contact_field[mu])
def points_to_polyData(points,mode='lines'):
vtkPoints = vtk.vtkPointData()
vtkCells = vtk.vtkCellArray()
points = vtk.vtkPoints() points.InsertPoint(0, 0.0, 0.0, 0.0) points.InsertPoint(1, 1.0, 0.0, 0.0) points.InsertPoint(2, .5, 1.0, 0.0) points.InsertPoint(3, 1.0, 0.0, 0.0) points.InsertPoint(4, 0.0, 0.0, 0.0) points.InsertPoint(5, .5, -1.0, .5) tCoords = vtk.vtkFloatArray() tCoords.SetNumberOfComponents(2) tCoords.InsertTuple2(0, 0.0, 0.0) tCoords.InsertTuple2(1, 1.0, 0.0) tCoords.InsertTuple2(2, .5, .86602540378443864676) tCoords.InsertTuple2(3, 0.0, 0.0) tCoords.InsertTuple2(4, 1.0, 0.0) tCoords.InsertTuple2(5, .5, .86602540378443864676) pointData = vtk.vtkPointData() pointData.SetTCoords(tCoords) triangles = vtk.vtkCellArray() triangles.InsertNextCell(3) triangles.InsertCellPoint(0) triangles.InsertCellPoint(1) triangles.InsertCellPoint(2) triangles.InsertNextCell(3) triangles.InsertCellPoint(3) triangles.InsertCellPoint(4) triangles.InsertCellPoint(5) triangle = vtk.vtkPolyData() triangle.SetPolys(triangles) triangle.SetPoints(points) triangle.GetPointData().SetTCoords(tCoords) triangleMapper = vtk.vtkPolyDataMapper()
points = vtk.vtkPoints() points.InsertPoint(0,0.0,0.0,0.0) points.InsertPoint(1,1.0,0.0,0.0) points.InsertPoint(2,.5,1.0,0.0) points.InsertPoint(3,1.0,0.0,0.0) points.InsertPoint(4,0.0,0.0,0.0) points.InsertPoint(5,.5,-1.0,.5) tCoords = vtk.vtkFloatArray() tCoords.SetNumberOfComponents(2) tCoords.InsertTuple2(0,0.0,0.0) tCoords.InsertTuple2(1,1.0,0.0) tCoords.InsertTuple2(2,.5,.86602540378443864676) tCoords.InsertTuple2(3,0.0,0.0) tCoords.InsertTuple2(4,1.0,0.0) tCoords.InsertTuple2(5,.5,.86602540378443864676) pointData = vtk.vtkPointData() pointData.SetTCoords(tCoords) triangles = vtk.vtkCellArray() triangles.InsertNextCell(3) triangles.InsertCellPoint(0) triangles.InsertCellPoint(1) triangles.InsertCellPoint(2) triangles.InsertNextCell(3) triangles.InsertCellPoint(3) triangles.InsertCellPoint(4) triangles.InsertCellPoint(5) triangle = vtk.vtkPolyData() triangle.SetPolys(triangles) triangle.SetPoints(points) triangle.GetPointData().SetTCoords(tCoords) triangleMapper = vtk.vtkPolyDataMapper()
def vtkrender(d1=None, d2=None):
x = (arange(50.0)-25)/2.0
y = (arange(50.0)-25)/2.0
r = sqrt(x[:]**2+y**2)
z = 5.0*signal.special.j0(r) # Bessel function of order 0
z1 = reshape(transpose(z), (-1,))
point_data = vtk.vtkPointData(vtk.vtkScalars(z1))
grid = vtk.vtkStructuredPoints((50,50, 1), (-12.5, -12.5, 0), (0.5, 0.5, 1))
data = vtk.VtkData(grid, point_data)
data.tofile('/tmp/test.vtk')
d1 = d2 = '/tmp/test.vtk'
#v2,v1,data1,data2 = inputs()
if d1 == None:
d1 = "/home/danc/E0058brain.vtk"
#d1 = "/home/danc/vtk/data1.vtk"
if d2 == None:
d2 = "/home/danc/E0058MEG.vtk"
#d2='/home/danc/vtk/data2.vtk'
#d2 = "/home/danc/mrvtk_0003overlay.vtk"
v1 = vtk.vtkStructuredPointsReader()
#v1.SetFileName("/home/danc/mrvtk.vtk")
v1.SetFileName(d1)
v2 = vtk.vtkStructuredPointsReader()
#v2.SetFileName("/home/danc/mrvtk_overlay.vtk")
v2.SetFileName(d2)
v1.SetLookupTableName('/home/danc/colortable.lut')
v1.SetReadAllColorScalars
v1.Update()
v2.Update()
global xMax, xMin, yMin, yMax, zMin, zMax, current_widget, slice_number
xMin, xMax, yMin, yMax, zMin, zMax = v1.GetOutput().GetWholeExtent()
spacing = v1.GetOutput().GetSpacing()
sx, sy, sz = spacing
origin = v1.GetOutput().GetOrigin()
ox, oy, oz = origin
# An outline is shown for context.
outline = vtk.vtkOutlineFilter()
outline.SetInput(v1.GetOutput())
outlineMapper = vtk.vtkPolyDataMapper()
outlineMapper.SetInput(outline.GetOutput())
outlineActor = vtk.vtkActor()
outlineActor.SetMapper(outlineMapper)
outlineActor.GetProperty().SetColor(1,1,1)
# The shared picker enables us to use 3 planes at one time
# and gets the picking order right
picker = vtk.vtkCellPicker()
picker.SetTolerance(0.005)
# The 3 image plane widgets are used to probe the dataset.
planeWidgetX = vtk.vtkImagePlaneWidget()
planeWidgetX.DisplayTextOn()
planeWidgetX.SetInput(v1.GetOutput())
planeWidgetX.SetPlaneOrientationToXAxes()
planeWidgetX.SetSliceIndex(int(round(xMax/2)))
planeWidgetX.SetPicker(picker)
planeWidgetX.SetKeyPressActivationValue("x")
planeWidgetX.GetPlaneProperty().SetDiffuseColor((0,1,1))
#planeWidgetX.GetPlaneProperty().SetColor(0,1,1)
#planeWidgetX.GetPlaneProperty().SetSpecularColor(0,1,1)
#planeWidgetX.GetPlaneProperty().SetAmbientColor(0,1,1)
planeWidgetX.GetPlaneProperty().SetFrontfaceCulling(10)
planeWidgetX.GetPlaneProperty().SetRepresentationToWireframe
#planeWidgetX.GetColorMap()
#print planeWidgetX.GetColorMap()
#planeWidgetX.SetHueRange(0.667,0.0)
#planeWidgetX.SetLookupTable('/home/danc/colortable.lut')
prop1 = planeWidgetX.GetPlaneProperty()
prop1.SetDiffuseColor(1, 0, 0)
prop1.SetColor(1,0,0)
prop1.SetSpecularColor(0, 1, 1)
#print planeWidgetX.GetLookupTable()
g = planeWidgetX.GetLookupTable()
#print g
## arrow = vtk.vtkArrowSource()
#### arrow.SetShaftRadius(100)
#### arrow.SetShaftResolution(80)
#### arrow.SetTipRadius(100)
#### arrow.SetTipLength(1000)
#### #arrow.SetTipResolution(80)
## arrowMapper = vtk.vtkPolyDataMapper()
## arrowMapper.SetInput(arrow.GetOutput())
## arrowActor = vtk.vtkActor()
## arrowActor.SetMapper(arrowMapper)
## arrowActor.SetPosition(0, 0, 0)
## arrowActor.GetProperty().SetColor(0, 1, 0)
planeWidgetY = vtk.vtkImagePlaneWidget()
planeWidgetY.DisplayTextOn()
planeWidgetY.SetInput(v1.GetOutput())
planeWidgetY.SetPlaneOrientationToYAxes()
planeWidgetY.SetSliceIndex(int(round(yMax/2)))
planeWidgetY.SetPicker(picker)
planeWidgetY.SetKeyPressActivationValue("y")
prop2 = planeWidgetY.GetPlaneProperty()
prop2.SetColor(1, 1, 0)
planeWidgetY.SetLookupTable(planeWidgetX.GetLookupTable())
planeWidgetY.GetPlaneProperty().SetDiffuseColor(0,1,1)
# for the z-slice, turn off texture interpolation:
# interpolation is now nearest neighbour, to demonstrate
# cross-hair cursor snapping to pixel centers
planeWidgetZ = vtk.vtkImagePlaneWidget()
planeWidgetZ.SetSliceIndex(100)
planeWidgetZ.SetSlicePosition(100)
planeWidgetZ.DisplayTextOn()
planeWidgetZ.SetInput(v1.GetOutput())
planeWidgetZ.SetPlaneOrientationToZAxes()
planeWidgetZ.SetSliceIndex(int(round(yMax/2)))
planeWidgetZ.SetPicker(picker)
planeWidgetZ.SetKeyPressActivationValue("z")
prop3 = planeWidgetZ.GetPlaneProperty()
prop3.SetColor(0, 0, 1)
planeWidgetZ.SetLookupTable(planeWidgetX.GetLookupTable())
planeWidgetZ.GetPlaneProperty().SetDiffuseColor(0,1,1)
filelist = [v2,v1];
for i in filelist:
coloroniso = vtk.vtkStructuredPointsReader()
coloroniso.SetFileName(i.GetFileName())
coloroniso.SetScalarsName("colors")
coloroniso.Update()
isosurface = vtk.vtkStructuredPointsReader()
isosurface.SetFileName(i.GetFileName())
isosurface.SetScalarsName("scalars")
isosurface.Update()
iso = vtk.vtkContourFilter()
iso.SetInput(i.GetOutput())
#iso.SetInput(isosurface.GetOutput())
if i == v1:
iso.SetValue(0, 20)
else:
iso.SetValue(0,10)
#iso.SetNumberOfContours(10)
probe = vtk.vtkProbeFilter()
probe.SetInput(iso.GetOutput())
probe.SetSource(coloroniso.GetOutput())
cast = vtk.vtkCastToConcrete()
cast.SetInput(probe.GetOutput())
normals = vtk.vtkPolyDataNormals()
#normals.SetMaxRecursionDepth(100)
normals.SetInput(cast.GetPolyDataOutput())
normals.SetFeatureAngle(45)
## clut = vtk.vtkLookupTable()
## clut.SetHueRange(0, .67)
## clut.Build()
## clut.SetValueRange(coloroniso.GetOutput().GetScalarRange())
## normals = vtk.vtkPolyDataNormals()
## normals.SetInput(iso.GetOutput())
## normals.SetFeatureAngle(45)
isoMapper = vtk.vtkPolyDataMapper()
isoMapper.SetInput(normals.GetOutput())
isoMapper.ScalarVisibilityOn()
#isoMapper.SetColorModeToMapScalars()
isoMapper.ColorByArrayComponent(0, 100)#("VelocityMagnitude", 0)
isoMapper.SetScalarRange([1, 200])
## isoMapper.SetLookupTable(clut)
isoActor = vtk.vtkActor()
isoActor.SetMapper(isoMapper)
## isoActor.GetProperty().SetDiffuseColor([.5,.5,.5])
## isoActor.GetProperty().SetSpecularColor([1,1,1])
## isoActor.GetProperty().SetDiffuse(.5)
## isoActor.GetProperty().SetSpecular(.5)
## isoActor.GetProperty().SetSpecularPower(15)
## isoActor.GetProperty().SetOpacity(.6)
isoActor.GetProperty().SetDiffuseColor(1, .2, .2)
isoActor.GetProperty().SetSpecular(.7)
isoActor.GetProperty().SetSpecularPower(20)
isoActor.GetProperty().SetOpacity(0.5)
if i == v1:
print 'under'
isoActorUnderlay = isoActor
else:
print 'over'
isoActorOverlay = isoActor
# Create the RenderWindow and Renderer
ren = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren)
# Add the outline actor to the renderer, set the background color and size
ren.AddActor(outlineActor)
#ren.AddActor(sphereActor)
renWin.SetSize(700, 700)
ren.SetBackground(0, 0, 0)
current_widget = planeWidgetZ
mode_widget = planeWidgetZ
# Create the GUI
# We first create the supporting functions (callbacks) for the GUI
#
# Align the camera so that it faces the desired widget
def AlignCamera():
#global ox, oy, oz, sx, sy, sz, xMax, xMin, yMax, yMin, zMax, \
# zMin, slice_number
#global current_widget
cx = ox+(0.5*(xMax-xMin))*sx
cy = oy+(0.5*(yMax-yMin))*sy
cz = oy+(0.5*(zMax-zMin))*sz
vx, vy, vz = 0, 0, 0
nx, ny, nz = 0, 0, 0
iaxis = current_widget.GetPlaneOrientation()
if iaxis == 0:
vz = -1
nx = ox + xMax*sx
cx = ox + slice_number*sx
elif iaxis == 1:
vz = -1
ny = oy+yMax*sy
cy = oy+slice_number*sy
else:
vy = 1
nz = oz+zMax*sz
cz = oz+slice_number*sz
px = cx+nx*2
py = cy+ny*2
pz = cz+nz*3
camera = ren.GetActiveCamera()
camera.SetViewUp(vx, vy, vz)
camera.SetFocalPoint(cx, cy, cz)
camera.SetPosition(px, py, pz)
camera.OrthogonalizeViewUp()
ren.ResetCameraClippingRange()
renWin.Render()
# Capture the display and place in a tiff
def CaptureImage():
w2i = vtk.vtkWindowToImageFilter()
writer = vtk.vtkTIFFWriter()
w2i.SetInput(renWin)
w2i.Update()
writer.SetInput(w2i.GetOutput())
writer.SetFileName("/home/danc/image.tif")
renWin.Render()
writer.Write()
# Align the widget back into orthonormal position,
# set the slider to reflect the widget's position,
# call AlignCamera to set the camera facing the widget
def AlignXaxis():
global xMax, xMin, current_widget, slice_number
po = planeWidgetX.GetPlaneOrientation()
if po == 3:
planeWidgetX.SetPlaneOrientationToXAxes()
slice_number = (xMax-xMin)/2
planeWidgetX.SetSliceIndex(slice_number)
else:
slice_number = planeWidgetX.GetSliceIndex()
current_widget = planeWidgetX
slice.config(from_=xMin, to=xMax)
slice.set(slice_number)
AlignCamera()
def AlignYaxis():
global yMin, yMax, current_widget, slice_number
po = planeWidgetY.GetPlaneOrientation()
if po == 3:
planeWidgetY.SetPlaneOrientationToYAxes()
slice_number = (yMax-yMin)/2
planeWidgetY.SetSliceIndex(slice_number)
else:
slice_number = planeWidgetY.GetSliceIndex()
current_widget = planeWidgetY
slice.config(from_=yMin, to=yMax)
slice.set(slice_number)
AlignCamera()
def AlignZaxis():
global yMin, yMax, current_widget, slice_number
po = planeWidgetZ.GetPlaneOrientation()
if po == 3:
planeWidgetZ.SetPlaneOrientationToZAxes()
slice_number = (zMax-zMin)/2
planeWidgetZ.SetSliceIndex(slice_number)
else:
slice_number = planeWidgetZ.GetSliceIndex()
current_widget = planeWidgetZ
slice.config(from_=zMin, to=zMax)
slice.set(slice_number)
AlignCamera()
##################def flag(sw):
def underlay():
print 'under'
global overunderstatus
overunderstatus = 'under'
isoActor = isoActorUnderlay
u_button.config(relief='sunken')
o_button.config(relief='raised')
six=planeWidgetX.GetSliceIndex()
siy=planeWidgetY.GetSliceIndex()
siz=planeWidgetZ.GetSliceIndex()
data = v1
planeWidgetX.SetInput(data.GetOutput())
planeWidgetY.SetInput(data.GetOutput())
planeWidgetZ.SetInput(data.GetOutput())
planeWidgetX.SetSliceIndex(six)
planeWidgetY.SetSliceIndex(siy)
planeWidgetZ.SetSliceIndex(siz)
renWin.Render()
def overlay():
print 'over'
global overunderstatus
overunderstatus = 'over'
isoActor = isoActorOverlay
o_button.config(relief='sunken')
u_button.config(relief='raised')
six=planeWidgetX.GetSliceIndex()
siy=planeWidgetY.GetSliceIndex()
siz=planeWidgetZ.GetSliceIndex()
data = v2
planeWidgetX.SetInput(data.GetOutput())
planeWidgetY.SetInput(data.GetOutput())
planeWidgetZ.SetInput(data.GetOutput())
planeWidgetX.SetSliceIndex(six)
planeWidgetY.SetSliceIndex(siy)
planeWidgetZ.SetSliceIndex(siz)
renWin.Render()
def render3d():
print '3d rend'
global buttonpos
try:
if overunderstatus == 'under':
isoActor = isoActorUnderlay
else:
isoActor = isoActorOverlay
except NameError:
isoActor = isoActorUnderlay
try:
buttonpos
print buttonpos
except NameError:
buttonpos = 0
print buttonpos
r_button.config(relief='sunken')
ren.AddActor(isoActor)
renWin.Render()
else:
if buttonpos == 0:
buttonpos = 1
r_button.config(relief='raised')
ren.RemoveActor(isoActor)
ren.RemoveActor(isoActorUnderlay)
ren.RemoveActor(isoActorOverlay)
renWin.Render()
else:
buttonpos = 0
r_button.config(relief='sunken')
print o_button
ren.AddActor(isoActor)
renWin.Render()
return buttonpos
# Set the widget's reslice interpolation mode
# to the corresponding popup menu choice
def SetInterpolation():
global mode_widget, mode
if mode.get() == 0:
mode_widget.TextureInterpolateOff()
else:
mode_widget.TextureInterpolateOn()
mode_widget.SetResliceInterpolate(mode.get())
renWin.Render()
# Share the popup menu among buttons, keeping track of associated
# widget's interpolation mode
def buttonEvent(event, arg=None):
global mode, mode_widget, popm
if arg == 0:
mode_widget = planeWidgetX
elif arg == 1:
mode_widget = planeWidgetY
elif arg == 2:
mode_widget = planeWidgetZ
else:
return
mode.set(mode_widget.GetResliceInterpolate())
popm.entryconfigure(arg, variable=mode)
popm.post(event.x + event.x_root, event.y + event.y_root)
def SetSlice(sl):
global current_widget
current_widget.SetSliceIndex(int(sl))
ren.ResetCameraClippingRange()
renWin.Render()
###
# Now actually create the GUI
root = Tkinter.Tk()
root.withdraw()
top = Tkinter.Toplevel(root)
# Define a quit method that exits cleanly.
def quit(obj=root):
print obj
obj.quit()
obj.destroy()
#vtkrender.destroy()
# Popup menu
popm = Tkinter.Menu(top, tearoff=0)
mode = Tkinter.IntVar()
mode.set(1)
popm.add_radiobutton(label="nearest", variable=mode, value=0,
command=SetInterpolation)
popm.add_radiobutton(label="linear", variable=mode, value=1,
command=SetInterpolation)
popm.add_radiobutton(label="cubic", variable=mode, value=2,
command=SetInterpolation)
display_frame = Tkinter.Frame(top)
display_frame.pack(side="top", anchor="n", fill="both", expand="false")
# Buttons
ctrl_buttons = Tkinter.Frame(top)
ctrl_buttons.pack(side="top", anchor="n", fill="both", expand="false")
quit_button = Tkinter.Button(ctrl_buttons, text="Quit", command=quit)
capture_button = Tkinter.Button(ctrl_buttons, text="Tif",
command=CaptureImage)
quit_button.config(background='#C0C0C0')
x_button = Tkinter.Button(ctrl_buttons, text="x", command=AlignXaxis)
y_button = Tkinter.Button(ctrl_buttons, text="y", command=AlignYaxis)
z_button = Tkinter.Button(ctrl_buttons, text="z", command=AlignZaxis)
u_button = Tkinter.Button(ctrl_buttons, text="underlay", command=underlay)
o_button = Tkinter.Button(ctrl_buttons, text="overlay", command=overlay)
r_button = Tkinter.Button(ctrl_buttons, text="3d render", command=render3d)
o_button.config(background='#FFFFFF')
u_button.config(relief='sunken')
x_button.bind("<Button-3>", lambda e: buttonEvent(e, 0))
y_button.bind("<Button-3>", lambda e: buttonEvent(e, 1))
z_button.bind("<Button-3>", lambda e: buttonEvent(e, 2))
u_button.bind("<Button-3>", lambda e: buttonEvent(e, 3))
o_button.bind("<Button-3>", lambda e: buttonEvent(e, 4))
r_button.bind("<Button-3>", lambda e: buttonEvent(e, 5))
for i in (quit_button, capture_button, x_button, y_button, z_button, u_button, o_button, r_button):
i.pack(side="left", expand="true", fill="both")
# Create the render widget
renderer_frame = Tkinter.Frame(display_frame)
renderer_frame.pack(padx=3, pady=3,side="left", anchor="n",
fill="both", expand="false")
render_widget = vtkTkRenderWindowInteractor(renderer_frame,
rw=renWin, width=600,
height=600)
for i in (render_widget, display_frame):
i.pack(side="top", anchor="n",fill="both", expand="false")
# Add a slice scale to browse the current slice stack
slice_number = Tkinter.IntVar()
slice_number.set(current_widget.GetSliceIndex())
slice = Tkinter.Scale(top, from_=zMin, to=zMax, orient="horizontal",
command=SetSlice,variable=slice_number,
label="Slice")
slice.pack(fill="x", expand="false")
# Done with the GUI.
###
# Set the interactor for the widgets
iact = render_widget.GetRenderWindow().GetInteractor()
planeWidgetX.SetInteractor(iact)
planeWidgetX.On()
planeWidgetY.SetInteractor(iact)
planeWidgetY.On()
planeWidgetZ.SetInteractor(iact)
planeWidgetZ.On()
# Create an initial interesting view
cam1 = ren.GetActiveCamera()
cam1.Elevation(210)
cam1.SetViewUp(1, -1, 1)
cam1.Azimuth(-145)
ren.ResetCameraClippingRange()
# Render it
render_widget.Render()
iact.Initialize()
renWin.Render()
iact.Start()
# Start Tkinter event loop
root.mainloop()