def init():
GPIO.setmode(GPIO.BCM)
GPIO.SETUP(22, gpio.IN) #input pour le pull a la pin 22
#SPI setup
CLK = 40
MISO = 35
MOSI = 38
CS = 36
spi.open(1,2) #bus 1 device 0
spi.max_speed_hz = 7629
from firebase import firebase
import time
import threading
from time import sleep
import RPi.GPIO as GPIO
FBConn = firebase.FirebaseApplication('https://medcare-c3184.firebaseio.com/',
None)
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
GPIO.SETUP(21, GPIO.IN, pull_up_down=GPIO.PUD_UP)
buzzer = 23
GPIO.setup(buzzer, GPIO.OUT)
previous = "null"
while True:
state = GPIO.input(21)
print(state)
if state == 0 and previous == "open" or state == 0 and previous == "null":
pill = str("bad")
data_to_upload = {'pillTaken': pill}
result = FBConn.patch('/Update', data_to_upload)
previous = "closed"
GPIO.output(buzzer, GPIO.LOW)
#led pinout test import RPi.GPIO as GPIO GPIO.setmode(GPIO.BCM) import time pins=[17,18,27,22] for i,pin in enumerate(pins): GPIO.SETUP(pin,GPIO.OUT) for j in range(i+1): GPIO.output(pin,1) time.sleep(0.5) GPIO.OUTPUT(pin,0) time.sleep(0.5) GPIO.cleanup()
# Servo Control
import time
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BOARD)
GPIO.SETUP(32, GPIO.OUT)
try:
while True:
GPIO.output(32, 1)
time.sleep(0.0015)
GPIO.output(7, 0)
time.sleep(2)
except KeyboardInterrupt:
GPIO.cleanup
import os
import glob
import time
import RPi.GPIO as GPIO
from bluetooth import *
os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')
GPIO.setmode(GPIO.BCM)
GPIO.SETUP(17, GPIO.OUT)
base_dir = '/sys/bus/w1/devices/'
device_folder = glob.glob(base_dir + '28*')[0]
device_file = device_folder + '/w1_slave'
def read_temp_raw():
f = open(device_file, 'r')
lines = f.readlines()
f.close()
return lines
def read_temp():
lines = read_temp_raw()
while lines[0].strip()[-3:] != 'YES':
time.sleep(0.2)
lines = read_temp_raw()
equals_pos = lines[1].find('t=')
if equals_pos != -1:
#!/usr/bin/env python
import RPi.GPIO as GPIO
import time
LedPin = 11 # Pin 11
GPIO.setmode(GPIO.BOARD)
GPIO.SETUP(LedPin, GPIO.OUT)
GPIO.output(LedPin, GPIO.HIGH)
try:
while True:
print '...led on'
GPIO.output(LedPin, GPIO.LOW)
time.sleep(0.5)
print '...led off'
GPIO.output(LedPin, GPIO.HIGH)
time.sleep(0.5)
except KeybaordInterrupt:
GPIO.output(LedPin, High)
GPIO.cleanup()
def button_callback(channel):
global light_on
if light_on == False:
GPIO.output(led_pin, 1)
print("LED ON!")
light_on = True
else:
GPIO.output(led_pin, 0)
print("LED OFF!")
light_on = False
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
button_pin = 15
led_pin = 4
light_on = False
GPIO.setup(button_pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.SETUP(led_pin, GPIO.OUT)
GPIO.add_event_detect(button_pin,
GPIO.RISING,
callback=button_callback,
bouncetime=300)
while 1:
time.sleep(0.1)