def writeOutput(fileName=''):
"Cleave a GNU Triangulated Surface file. If no fileName is specified, cleave the first GNU Triangulated Surface file in this folder."
if fileName == '':
unmodified = gcodec.getFilesWithFileTypesWithoutWords(
fabmetheus_interpret.getImportPluginFileNames())
if len(unmodified) == 0:
print("There are no carvable files in this folder.")
return
fileName = unmodified[0]
startTime = time.time()
print('File ' + gcodec.getSummarizedFileName(fileName) +
' is being cleaved.')
cleaveGcode = getCraftedText(fileName)
if cleaveGcode == '':
return
suffixFileName = fileName[:fileName.rfind('.')] + '_cleave.svg'
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join(suffixDirectoryName, suffixReplacedBaseName)
gcodec.writeFileText(suffixFileName, cleaveGcode)
print('The cleaved file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to cleave the file.')
settings.openWebPage(suffixFileName)
def writeOutput(fileName=''):
"Export a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified(
fileName)
if fileName == '':
return
exportRepository = ExportRepository()
settings.getReadRepository(exportRepository)
startTime = time.time()
print('File ' + gcodec.getSummarizedFileName(fileName) +
' is being chain exported.')
Filehandle = open('report.txt', 'w')
Filehandle.write('File ' + gcodec.getSummarizedFileName(fileName) +
' is being chain exported.\n')
Filehandle.close()
suffixFileName = fileName[:fileName.rfind(
'.')] + '_export.' + exportRepository.fileExtension.value
gcodeText = gcodec.getGcodeFileText(fileName, '')
procedures = skeinforge_craft.getProcedures('export', gcodeText)
gcodeText = skeinforge_craft.getChainTextFromProcedures(
fileName, procedures[:-1], gcodeText)
if gcodeText == '':
return
skeinforge_analyze.writeOutput(suffixFileName, gcodeText)
if exportRepository.savePenultimateGcode.value:
penultimateFileName = fileName[:fileName.
rfind('.')] + '_penultimate.gcode'
gcodec.writeFileText(penultimateFileName, gcodeText)
print('The penultimate file is saved as ' +
gcodec.getSummarizedFileName(penultimateFileName))
exportChainGcode = getCraftedTextFromText(gcodeText, exportRepository)
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule(
exportRepository.exportPlugins)
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.isReplaceable():
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
else:
selectedPluginModule.writeOutput(suffixFileName, exportChainGcode)
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced(replaceableExportChainGcode)
gcodec.writeFileText(suffixFileName, replaceableExportChainGcode)
print('The exported file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
if exportRepository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput(
exportChainGcode)
exec('print >> ' + exportRepository.alsoSendOutputTo.value +
', replaceableExportChainGcode')
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to export the file.')
Filehandle = open('report.txt', 'a')
Filehandle.write('It took ' + str(int(round(time.time() - startTime))) +
' seconds to export the file.')
Filehandle.close()
def writeOutput( fileName = '' ): "Carve a GNU Triangulated Surface file." startTime = time.time() print( 'File ' + gcodec.getSummarizedFileName( fileName ) + ' is being carved.' ) carveGcode = getCraftedText( fileName ) if carveGcode == '': return suffixFileName = gcodec.getFilePathWithUnderscoredBasename( fileName, '_carve.svg' ) gcodec.writeFileText( suffixFileName, carveGcode ) print( 'The carved file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) ) print( 'It took %s to carve the file.' % euclidean.getDurationString( time.time() - startTime ) ) settings.openWebPage( suffixFileName )
def analyzeFile( fileName ): "Get file interpretion." startTime = time.time() carving = getCarving( fileName ) if carving == None: return '' interpretGcode = str( carving ) if interpretGcode == '': return repository = settings.getReadRepository( InterpretRepository() ) if repository.printInterpretion.value: print( interpretGcode ) suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_interpret.' + carving.getInterpretationSuffix() suffixDirectoryName = os.path.dirname( suffixFileName ) suffixReplacedBaseName = os.path.basename( suffixFileName ).replace( ' ', '_' ) suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName ) gcodec.writeFileText( suffixFileName, interpretGcode ) print( 'The interpret file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) ) print( 'It took %s to interpret the file.' % euclidean.getDurationString( time.time() - startTime ) ) textProgram = repository.textProgram.value if textProgram == '': return if textProgram == 'webbrowser': settings.openWebPage( suffixFileName ) return textFilePath = '"' + os.path.normpath( suffixFileName ) + '"' # " to send in file name with spaces shellCommand = textProgram + ' ' + textFilePath print( 'Sending the shell command:' ) print( shellCommand ) commandResult = os.system( shellCommand ) if commandResult != 0: print( 'It may be that the system could not find the %s program.' % textProgram ) print( 'If so, try installing the %s program or look for another one, like Open Office which can be found at:' % textProgram ) print( 'http://www.openoffice.org/' ) print( 'Open office writer can then be started from the command line with the command "soffice -writer".' )
def getWindowAnalyzeFile(fileName):
"Get file interpretion."
startTime = time.time()
carving = getCarving(fileName)
if carving == None:
return None
interpretGcode = str( carving )
if interpretGcode == '':
return None
repository = settings.getReadRepository( InterpretRepository() )
if repository.printInterpretion.value:
print( interpretGcode )
suffixFileName = fileName[ : fileName.rfind('.') ] + '_interpret.' + carving.getInterpretationSuffix()
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName )
gcodec.writeFileText( suffixFileName, interpretGcode )
print('The interpret file is saved as ' + gcodec.getSummarizedFileName(suffixFileName) )
print('It took %s to interpret the file.' % euclidean.getDurationString( time.time() - startTime ) )
textProgram = repository.textProgram.value
if textProgram == '':
return None
if textProgram == 'webbrowser':
settings.openWebPage(suffixFileName)
return None
textFilePath = '"' + os.path.normpath(suffixFileName) + '"' # " to send in file name with spaces
shellCommand = textProgram + ' ' + textFilePath
print('Sending the shell command:')
print( shellCommand )
commandResult = os.system( shellCommand )
if commandResult != 0:
print('It may be that the system could not find the %s program.' % textProgram )
print('If so, try installing the %s program or look for another one, like Open Office which can be found at:' % textProgram )
print('http://www.openoffice.org/')
print('Open office writer can then be started from the command line with the command "soffice -writer".')
def writeOutput( self, fileName = ''):
"Cleave a GNU Triangulated Surface file. If no fileName is specified, cleave the first GNU Triangulated Surface file in this folder."
startTime = time.time()
print('File ' + gcodec.getSummarizedFileName(fileName) + ' is being cleaved.')
repository = CleaveRepository()
settings.getReadRepository(repository)
cleaveGcode = self.getCraftedText( fileName, '', repository )
if cleaveGcode == '':
return
suffixFileName = fileName[ : fileName.rfind('.') ] + '_cleave.svg'
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName )
gcodec.writeFileText( suffixFileName, cleaveGcode )
print('The cleaved file is saved as ' + gcodec.getSummarizedFileName(suffixFileName) )
print('It took %s to cleave the file.' % euclidean.getDurationString( time.time() - startTime ) )
settings.openSVGPage( suffixFileName, repository.svgViewer.value )
def writeOutput( fileName = '' ):
"Export a gcode linear move file."
fileName = fabmetheus_interpret.getFirstTranslatorFileNameUnmodified( fileName )
if fileName == '':
return
exportRepository = ExportRepository()
settings.getReadRepository( exportRepository )
startTime = time.time()
print( 'File ' + gcodec.getSummarizedFileName( fileName ) + ' is being chain exported.' )
Filehandle = open ('report.txt', 'w')
Filehandle.write ('File ' + gcodec.getSummarizedFileName( fileName ) + ' is being chain exported.\n')
Filehandle.close ()
suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_export.' + exportRepository.fileExtension.value
gcodeText = gcodec.getGcodeFileText( fileName, '' )
procedures = skeinforge_craft.getProcedures( 'export', gcodeText )
gcodeText = skeinforge_craft.getChainTextFromProcedures( fileName, procedures[ : - 1 ], gcodeText )
if gcodeText == '':
return
skeinforge_analyze.writeOutput( suffixFileName, gcodeText )
if exportRepository.savePenultimateGcode.value:
penultimateFileName = fileName[ : fileName.rfind( '.' ) ] + '_penultimate.gcode'
gcodec.writeFileText( penultimateFileName, gcodeText )
print( 'The penultimate file is saved as ' + gcodec.getSummarizedFileName( penultimateFileName ) )
exportChainGcode = getCraftedTextFromText( gcodeText, exportRepository )
replaceableExportChainGcode = None
selectedPluginModule = getSelectedPluginModule( exportRepository.exportPlugins )
if selectedPluginModule == None:
replaceableExportChainGcode = exportChainGcode
else:
if selectedPluginModule.isReplaceable():
replaceableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode )
else:
selectedPluginModule.writeOutput( suffixFileName, exportChainGcode )
if replaceableExportChainGcode != None:
replaceableExportChainGcode = getReplaced( replaceableExportChainGcode )
gcodec.writeFileText( suffixFileName, replaceableExportChainGcode )
print( 'The exported file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) )
if exportRepository.alsoSendOutputTo.value != '':
if replaceableExportChainGcode == None:
replaceableExportChainGcode = selectedPluginModule.getOutput( exportChainGcode )
exec( 'print >> ' + exportRepository.alsoSendOutputTo.value + ', replaceableExportChainGcode' )
print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to export the file.' )
Filehandle = open ('report.txt', 'a')
Filehandle.write ('It took '+ str( int( round( time.time() - startTime ) ) )+' seconds to export the file.')
Filehandle.close ()
def writeOutput( fileName, gcodeText = ''):
"Write the exported version of a gcode file."
binary16ByteRepository = Binary16ByteRepository()
settings.getReadRepository( binary16ByteRepository )
gcodeText = gcodec.getGcodeFileText( fileName, gcodeText )
skeinOutput = getOutput( gcodeText, binary16ByteRepository )
suffixFileName = fileName[ : fileName.rfind('.') ] + '.' + binary16ByteRepository.fileExtension.value
gcodec.writeFileText( suffixFileName, skeinOutput )
print('The converted file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) )
def writeOutput( fileName, gcodeText = '' ): "Write the exported version of a gcode file." gcodeText = gcodec.getGcodeFileText( fileName, gcodeText ) repository = GcodeStepRepository() settings.getReadRepository( repository ) output = getOutput( gcodeText, repository ) suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_gcode_step.gcode' gcodec.writeFileText( suffixFileName, output ) print( 'The converted file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) )
def writeOutput(fileName, gcodeText=''):
"Write the exported version of a gcode file."
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
repository = GcodeStepRepository()
settings.getReadRepository(repository)
output = getOutput(gcodeText, repository)
suffixFileName = fileName[:fileName.rfind('.')] + '_gcode_step.gcode'
gcodec.writeFileText(suffixFileName, output)
print('The converted file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
def writeOutput(fileName, gcodeText=''):
"Write the exported version of a gcode file."
binary16ByteRepository = Binary16ByteRepository()
settings.getReadRepository(binary16ByteRepository)
gcodeText = gcodec.getGcodeFileText(fileName, gcodeText)
skeinOutput = getOutput(gcodeText, binary16ByteRepository)
suffixFileName = fileName[:fileName.rfind(
'.')] + '.' + binary16ByteRepository.fileExtension.value
gcodec.writeFileText(suffixFileName, skeinOutput)
print('The converted file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
def writeOutput(fileName=''):
"Chop a GNU Triangulated Surface file. If no fileName is specified, chop the first GNU Triangulated Surface file in this folder."
startTime = time.time()
print('File ' + gcodec.getSummarizedFileName(fileName) +
' is being chopped.')
repository = ChopRepository()
settings.getReadRepository(repository)
chopGcode = getCraftedText(fileName, '', repository)
if chopGcode == '':
return
suffixFileName = fileName[:fileName.rfind('.')] + '_chop.svg'
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join(suffixDirectoryName, suffixReplacedBaseName)
gcodec.writeFileText(suffixFileName, chopGcode)
print('The chopped file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
print('It took %s to chop the file.' %
euclidean.getDurationString(time.time() - startTime))
settings.openSVGPage(suffixFileName, repository.svgViewer.value)
def writeOutput( fileName = '' ): "Cleave a GNU Triangulated Surface file. If no fileName is specified, cleave the first GNU Triangulated Surface file in this folder." if fileName == '': unmodified = gcodec.getFilesWithFileTypesWithoutWords( fabmetheus_interpret.getImportPluginFileNames() ) if len( unmodified ) == 0: print( "There are no carvable files in this folder." ) return fileName = unmodified[ 0 ] startTime = time.time() print( 'File ' + gcodec.getSummarizedFileName( fileName ) + ' is being cleaved.' ) cleaveGcode = getCraftedText( fileName ) if cleaveGcode == '': return suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_cleave.svg' suffixDirectoryName = os.path.dirname( suffixFileName ) suffixReplacedBaseName = os.path.basename( suffixFileName ).replace( ' ', '_' ) suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName ) gcodec.writeFileText( suffixFileName, cleaveGcode ) print( 'The cleaved file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) ) print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to cleave the file.' ) settings.openWebPage( suffixFileName )
def analyzeFileGivenText( fileName, gcodeText, repository = None ): "Write statistics for a gcode file." print( '' ) print( '' ) print( 'Statistics are being generated for the file ' + gcodec.getSummarizedFileName( fileName ) ) if repository == None: repository = settings.getReadRepository( StatisticRepository() ) skein = StatisticSkein() statisticGcode = skein.getCraftedGcode( gcodeText, repository ) if repository.printStatistics.value: print( statisticGcode ) if repository.saveStatistics.value: gcodec.writeFileMessageEnd( '.txt', fileName, statisticGcode, 'The statistics file is saved as ' )
def execute(self):
"Export the canvas as an svg file."
svgFileName = gcodec.getFilePathWithUnderscoredBasename( self.fileName, self.suffix )
boundingBox = self.canvas.bbox( settings.Tkinter.ALL ) # tuple (w, n, e, s)
self.boxW = boundingBox[0]
self.boxN = boundingBox[1]
boxWidth = boundingBox[2] - self.boxW
boxHeight = boundingBox[3] - self.boxN
print('Exported svg file saved as ' + svgFileName )
svgTemplateText = gcodec.getFileTextInFileDirectory( settings.__file__, os.path.join('templates', 'canvas_template.svg') )
output = cStringIO.StringIO()
lines = gcodec.getTextLines( svgTemplateText )
firstWordTable = {}
firstWordTable['height="999px"'] = ' height="%spx"' % int( round( boxHeight ) )
firstWordTable['<!--replaceLineWith_coloredLines-->'] = self.getCanvasLinesOutput()
firstWordTable['replaceLineWithTitle'] = gcodec.getSummarizedFileName( self.fileName )
firstWordTable['width="999px"'] = ' width="%spx"' % int( round( boxWidth ) )
for line in lines:
parseLineReplace( firstWordTable, line, output )
gcodec.writeFileText( svgFileName, output.getvalue() )
fileExtension = self.fileExtension.value
svgViewer = self.svgViewer.value
if svgViewer == '':
return
if svgViewer == 'webbrowser':
settings.openWebPage( svgFileName )
return
svgFilePath = '"' + os.path.normpath( svgFileName ) + '"' # " to send in file name with spaces
shellCommand = svgViewer + ' ' + svgFilePath
print('')
if fileExtension == '':
print('Sending the shell command:')
print( shellCommand )
commandResult = os.system( shellCommand )
if commandResult != 0:
print('It may be that the system could not find the %s program.' % svgViewer )
print('If so, try installing the %s program or look for another svg viewer, like Netscape which can be found at:' % svgViewer )
print('http://www.netscape.org/')
return
convertedFileName = gcodec.getFilePathWithUnderscoredBasename( svgFilePath, '.' + fileExtension + '"')
shellCommand += ' ' + convertedFileName
print('Sending the shell command:')
print( shellCommand )
commandResult = os.system( shellCommand )
if commandResult != 0:
print('The %s program could not convert the svg to the %s file format.' % ( svgViewer, fileExtension ) )
print('Try installing the %s program or look for another one, like Image Magick which can be found at:' % svgViewer )
print('http://www.imagemagick.org/script/index.php')
def execute( self ):
"Export the canvas as an svg file."
svgFileName = gcodec.getFilePathWithUnderscoredBasename( self.fileName, self.suffix )
boundingBox = self.canvas.bbox( settings.Tkinter.ALL ) # tuple (w, n, e, s)
self.boxW = boundingBox[ 0 ]
self.boxN = boundingBox[ 1 ]
boxWidth = boundingBox[ 2 ] - self.boxW
boxHeight = boundingBox[ 3 ] - self.boxN
print( 'Exported svg file saved as ' + svgFileName )
svgTemplateText = gcodec.getFileTextInFileDirectory( settings.__file__, os.path.join( 'templates', 'canvas_template.svg' ) )
output = cStringIO.StringIO()
lines = gcodec.getTextLines( svgTemplateText )
firstWordTable = {}
firstWordTable[ 'height="999px"' ] = ' height="%spx"' % int( round( boxHeight ) )
firstWordTable[ '<!--replaceLineWith_coloredLines-->' ] = self.getCanvasLinesOutput()
firstWordTable[ 'replaceLineWithTitle' ] = gcodec.getSummarizedFileName( self.fileName )
firstWordTable[ 'width="999px"' ] = ' width="%spx"' % int( round( boxWidth ) )
for line in lines:
parseLineReplace( firstWordTable, line, output )
gcodec.writeFileText( svgFileName, output.getvalue() )
fileExtension = self.fileExtension.value
svgProgram = self.svgProgram.value
if svgProgram == '':
return
if svgProgram == 'webbrowser':
settings.openWebPage( svgFileName )
return
svgFilePath = '"' + os.path.normpath( svgFileName ) + '"' # " to send in file name with spaces
shellCommand = svgProgram + ' ' + svgFilePath
print( '' )
if fileExtension == '':
print( 'Sending the shell command:' )
print( shellCommand )
commandResult = os.system( shellCommand )
if commandResult != 0:
print( 'It may be that the system could not find the %s program.' % svgProgram )
print( 'If so, try installing the %s program or look for another one, like the Gnu Image Manipulation Program (Gimp) which can be found at:' % svgProgram )
print( 'http://www.gimp.org/' )
return
convertedFileName = gcodec.getFilePathWithUnderscoredBasename( svgFilePath, '.' + fileExtension + '"' )
shellCommand += ' ' + convertedFileName
print( 'Sending the shell command:' )
print( shellCommand )
commandResult = os.system( shellCommand )
if commandResult != 0:
print( 'The %s program could not convert the svg to the %s file format.' % ( svgProgram, fileExtension ) )
print( 'Try installing the %s program or look for another one, like Image Magick which can be found at:' % svgProgram )
print( 'http://www.imagemagick.org/script/index.php' )
def getWindowAnalyzeFileGivenText( fileName, gcodeText, repository = None ):
"Write scalable vector graphics for a gcode file given the settings."
if gcodeText == '':
return None
if repository == None:
repository = settings.getReadRepository( VectorwriteRepository() )
startTime = time.time()
vectorwriteGcode = VectorwriteSkein().getCarvedSVG( fileName, gcodeText, repository )
if vectorwriteGcode == '':
return None
suffixFileName = fileName[ : fileName.rfind('.') ] + '_vectorwrite.svg'
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName )
gcodec.writeFileText( suffixFileName, vectorwriteGcode )
print('The vectorwrite file is saved as ' + gcodec.getSummarizedFileName(suffixFileName) )
print('It took %s to vectorwrite the file.' % euclidean.getDurationString( time.time() - startTime ) )
settings.openSVGPage( suffixFileName, repository.svgViewer.value )
def analyzeFileGivenText(fileName, gcodeText, repository=None):
"Write scalable vector graphics for a gcode file given the settings."
if gcodeText == "":
return ""
if repository == None:
repository = settings.getReadRepository(VectorwriteRepository())
startTime = time.time()
vectorwriteGcode = VectorwriteSkein().getCarvedSVG(fileName, gcodeText, repository)
if vectorwriteGcode == "":
return
suffixFileName = fileName[: fileName.rfind(".")] + "_vectorwrite.svg"
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(" ", "_")
suffixFileName = os.path.join(suffixDirectoryName, suffixReplacedBaseName)
gcodec.writeFileText(suffixFileName, vectorwriteGcode)
print("The vectorwrite file is saved as " + gcodec.getSummarizedFileName(suffixFileName))
print("It took %s to vectorwrite the file." % euclidean.getDurationString(time.time() - startTime))
settings.openWebPage(suffixFileName)
def analyzeFileGivenText( fileName, gcodeText, repository = None ): "Write scalable vector graphics for a gcode file given the settings." if gcodeText == '': return '' if repository == None: repository = settings.getReadRepository( VectorwriteRepository() ) startTime = time.time() vectorwriteGcode = VectorwriteSkein().getSVG( fileName, gcodeText, repository ) if vectorwriteGcode == '': return suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_vectorwrite.svg' suffixDirectoryName = os.path.dirname( suffixFileName ) suffixReplacedBaseName = os.path.basename( suffixFileName ).replace( ' ', '_' ) suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName ) gcodec.writeFileText( suffixFileName, vectorwriteGcode ) print( 'The vectorwrite file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) ) print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to vectorwrite the file.' ) settings.openWebPage( suffixFileName )
def getWindowAnalyzeFileGivenText( fileName, gcodeText, repository = None ):
"Write scalable vector graphics for a gcode file given the settings."
if gcodeText == '':
return None
if repository == None:
repository = settings.getReadRepository( VectorwriteRepository() )
startTime = time.time()
vectorwriteGcode = VectorwriteSkein().getCarvedSVG( fileName, gcodeText, repository )
if vectorwriteGcode == '':
return None
suffixFileName = fileName[ : fileName.rfind('.') ] + '_vectorwrite.svg'
suffixDirectoryName = os.path.dirname( suffixFileName )
suffixReplacedBaseName = os.path.basename( suffixFileName ).replace(' ', '_')
suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName )
gcodec.writeFileText( suffixFileName, vectorwriteGcode )
print('The vectorwrite file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) )
print('It took %s to vectorwrite the file.' % euclidean.getDurationString( time.time() - startTime ) )
settings.openSVGPage( suffixFileName, repository.svgViewer.value )
def interpretFile( fileName ): "Get file interpretion." startTime = time.time() pluginModule = getInterpretPlugin( fileName ) if pluginModule == None: return '' carving = pluginModule.getCarving( fileName ) interpretGcode = str( carving ) if interpretGcode == '': return repository = settings.getReadRepository( InterpretRepository() ) if repository.printInterpretion.value: print( interpretGcode ) suffixFileName = fileName[ : fileName.rfind( '.' ) ] + '_interpret.' + carving.getInterpretationSuffix() suffixDirectoryName = os.path.dirname( suffixFileName ) suffixReplacedBaseName = os.path.basename( suffixFileName ).replace( ' ', '_' ) suffixFileName = os.path.join( suffixDirectoryName, suffixReplacedBaseName ) gcodec.writeFileText( suffixFileName, interpretGcode ) print( 'The interpret file is saved as ' + gcodec.getSummarizedFileName( suffixFileName ) ) print( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to interpret the file.' )
def getReplacedSVGTemplate( self, fileName, procedureName, rotatedBoundaryLayers ):
"Get the lines of text from the layer_template.svg file."
#( layers.length + 1 ) * (margin + sliceDimY * unitScale + txtHeight) + margin + txtHeight + margin + 110
cornerMaximum = self.carving.getCarveCornerMaximum()
cornerMinimum = self.carving.getCarveCornerMinimum()
self.extent = cornerMaximum - cornerMinimum
self.addRotatedLoopLayersToOutput( rotatedBoundaryLayers )
svgTemplateText = gcodec.getFileTextInFileDirectory( __file__, os.path.join( 'templates', 'layer_template.svg' ) )
svgTemplateText = getReplacedWordAndInQuotes( 'layerThickness', self.getRounded( self.carving.getCarveLayerThickness() ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'maxX', self.getRounded( cornerMaximum.x ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'minX', self.getRounded( cornerMinimum.x ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'maxY', self.getRounded( cornerMaximum.y ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'minY', self.getRounded( cornerMinimum.y ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'maxZ', self.getRounded( cornerMaximum.z ), svgTemplateText )
svgTemplateText = getReplacedWordAndInQuotes( 'minZ', self.getRounded( cornerMinimum.z ), svgTemplateText )
lines = gcodec.getTextLines( svgTemplateText )
self.margin = getParameterFromJavascript( lines, 'margin', self.margin )
self.textHeight = getParameterFromJavascript( lines, 'textHeight', self.textHeight )
javascriptControlsWidth = getParameterFromJavascript( lines, 'javascripControlBoxX', 510.0 )
noJavascriptControlsHeight = getParameterFromJavascript( lines, 'noJavascriptControlBoxY', 110.0 )
controlTop = len( rotatedBoundaryLayers ) * ( self.margin + self.extent.y * self.unitScale + self.textHeight ) + 2.0 * self.margin + self.textHeight
# width = margin + (sliceDimX * unitScale) + margin;
width = 2.0 * self.margin + max( self.extent.x * self.unitScale, javascriptControlsWidth )
summarizedFileName = gcodec.getSummarizedFileName( fileName ) + ' SVG Slice File'
noJavascriptControlsTagString = ' <g id="noJavascriptControls" fill="#000" transform="translate(%s, %s)">' % ( self.getRounded( self.margin ), self.getRounded( controlTop ) )
firstWordTable = {}
firstWordTable[ 'height="999px"' ] = ' height="%spx"' % self.getRounded( controlTop + noJavascriptControlsHeight + self.margin )
firstWordTable[ 'width="999px"' ] = ' width="%spx"' % self.getRounded( width )
firstWordTable[ '<!--replaceLineWith_boundaryLayerLines-->' ] = self.output.getvalue()
firstWordTable[ '<!--replaceLineWith_emptyString-->' ] = ''
firstWordTable[ '<!--replaceLineWith_noJavascriptControls-->' ] = noJavascriptControlsTagString
firstWordTable[ '<!--replaceLineWith_sliceVariableLines-->' ] = self.getInitializationForOutputSVG( procedureName )
replaceWithTable = {}
replaceWithTable[ 'replaceWith_Title' ] = summarizedFileName
replaceWithTable[ 'replaceWith_dimX' ] = self.getRounded( self.extent.x )
replaceWithTable[ 'replaceWith_dimY' ] = self.getRounded( self.extent.y )
replaceWithTable[ 'replaceWith_dimZ' ] = self.getRounded( self.extent.z )
output = cStringIO.StringIO()
for line in lines:
parseLineReplaceWithTable( firstWordTable, line, output, replaceWithTable )
return output.getvalue()
def analyzeFileGivenText(fileName, gcodeText, repository=None):
"Write scalable vector graphics for a gcode file given the settings."
if gcodeText == '':
return ''
if repository == None:
repository = settings.getReadRepository(VectorwriteRepository())
startTime = time.time()
vectorwriteGcode = VectorwriteSkein().getSVG(fileName, gcodeText,
repository)
if vectorwriteGcode == '':
return
suffixFileName = fileName[:fileName.rfind('.')] + '_vectorwrite.svg'
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join(suffixDirectoryName, suffixReplacedBaseName)
gcodec.writeFileText(suffixFileName, vectorwriteGcode)
print('The vectorwrite file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to vectorwrite the file.')
settings.openWebPage(suffixFileName)
def interpretFile(fileName):
"Get file interpretion."
startTime = time.time()
pluginModule = getInterpretPlugin(fileName)
if pluginModule == None:
return ''
carving = pluginModule.getCarving(fileName)
interpretGcode = str(carving)
if interpretGcode == '':
return
repository = settings.getReadRepository(InterpretRepository())
if repository.printInterpretion.value:
print(interpretGcode)
suffixFileName = fileName[:fileName.rfind(
'.')] + '_interpret.' + carving.getInterpretationSuffix()
suffixDirectoryName = os.path.dirname(suffixFileName)
suffixReplacedBaseName = os.path.basename(suffixFileName).replace(' ', '_')
suffixFileName = os.path.join(suffixDirectoryName, suffixReplacedBaseName)
gcodec.writeFileText(suffixFileName, interpretGcode)
print('The interpret file is saved as ' +
gcodec.getSummarizedFileName(suffixFileName))
print('It took ' + str(int(round(time.time() - startTime))) +
' seconds to interpret the file.')